. .Nx*M \*V runs on a TT030, Falcon, Hades and MilanI. An FPU is not required. The minimum amount of RAM required is 4 MB. On the Hades, only the Tseng PCI VGA cards (ET4000/ET6000/ET6100) are supported in the \*V release. When an unsupported video card is present, you can use .Nx with a serial console only.
p Here is a table of recommended HD partition sizes for a full install: l -column -offset indent Partition Suggested 100xMBxx Needed 100xMB t Partition Ta Suggested Ta + X Ta Needed Ta + X t root (/) Ta "25 MB" Ta "25 MB" Ta "20 MB" Ta "20 MB" t /usr Ta "245 MB" Ta "270 MB" Ta "120 MB" Ta "145 MB" t /var Ta "20 MB" Ta "20 MB" Ta "5 MB" Ta "5 MB" t swap Ta Em "2*RAM below 32 MB, then up to you" .El .(item -offset indent Anything else is up to you! .item)
p In addition of the rule of thumb for the swap size mentioned below, you probably want to make sure that the size of the swap partition does not drop below 20 MB (30 MB for systems with X). Another item is the add-on packages. You might want 20-30M (or more) in
a /usr ) to store packages from the .Nx package system. As you may note the recommended size of
a /usr is 125 MB greater than needed. This is to leave room for a kernel source and compile tree as you will probably want to compile your own kernel. .Li ( GENERIC is large and bulky to accommodate all people, .Li BOOT is small and might not have all the features you want). . .Ss2 Supported devices .(bullet -offset indent The builtin SCSI host adapter .(bullet -compact Should support most SCSI-drives. t Should support most tape drives. t Should support most CD-ROM drives. t Should support most ZIP/M-O drives. .bullet) t The builtin video controller t The builtin (720 KB / 1.44 MB) floppy drive t The serial2/modem2 ports t The Falcon FX memory expansion t The Atari mouse t A 3-button mouse (see build description in the FAQ!) t The parallel printer t IDE interface on both Falcon and Hades (includes ATAPI support) t The serial interface on the first 68901 UART (modem1) t VME-bus devices (TT030/Hades) .(bullet -compact BVME410 ethernet t Circad Leonardo 24-bit VME graphics adapter t Crazy Dots VME et4000 graphics adapter t Riebl (and possibly PAM) ethernet cards on the VME bus. .bullet) t PCI-bus devices (Hades and Milan only) .(bullet -compact ET4000/ET6000/ET6100-PCI (VGA console) t ESS Technology Inc. Solo-1 Soundcard t 3Com 3c59x Network card .bullet) t ISA-bus devices (Hades only) .(bullet -compact Teles S0/16.3-ISA ISDN adapter (with I4B) .bullet) .bullet)
p This list is incomplete by definition. We can not test all SCSI peripherals, ISA cards or PCI cards. If you have problems with such a peripheral, please contact the .Mt port-\*M@netbsd.org mailing list.