xref: /netbsd/distrib/notes/cats/hardware (revision bf9ec67e)
$NetBSD: hardware,v 1.1 2002/04/02 11:36:34 skrll Exp $

Copyright (c) 2002 The NetBSD Foundation, Inc.
All rights reserved.

This code is derived from software contributed to The NetBSD Foundation
by

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
must display the following acknowledgement:
This product includes software developed by the NetBSD
Foundation, Inc. and its contributors.
4. Neither the name of The NetBSD Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

. .Nx*M \*V runs on a Chalice CATS systems from and Intel EBSA boards. The minimal configuration is said to require 8 MB of RAM and 50 MB of disk space, though we do not know of anyone running with a system quite this minimal today. To install the entire system requires much more disk space (the unpacked binary distribution, without sources, requires at least 65 MB without counting space needed for swap space, etc), and to run X or compile the system, more RAM is recommended. (8 MB of RAM will actually allow you to run X and/or compile, but it won't be speedy. Note that until you have around 16 MB of RAM, getting more RAM is more important than getting a faster CPU.) . .Ss2 Supported Chalice CATS devices .(bullet -offset indent -compact ALI M1543 southbridge inc PS/2 keyboard & mouse, ide, serial t Parallel, USB and ISA bus t RTC .bullet) . .Ss2 Supported Intel EBSA285 & Chalice CATS PCI devices .(bullet -offset indent PCI - PCI bridges .(bullet -compact DC21150 t DC21152 t DC21153 t DC21154 t Hint HB1 .bullet) t Digital DC21x4x-based PCI Ethernet adapters .(bullet -compact Cogent EM1X0, EM960 (a.k.a. Adaptec ANA-69XX) t Cogent EM964 [b] t Cogent EM4XX [b] t Compex Readylink PCI t DANPEX EN-9400P3 t Digital Celebris GL, GLST on-board ethernet t .Tn DEC

q Tn Digital PCI Ethernet/Fast Ethernet adapters (all) t JCIS Condor JC1260 t Linksys PCI Fast Ethernet t SMC EtherPower 10, 10/100 (PCI only!) t SMC EtherPower t SVEC t PN0455 t SVEC FD1000-TP t Znyx ZX34X .bullet) t Qlogic ISP [12]0x0 SCSI/FibreChannel boards t Adaptec AHA-2910, 2915, 2920, and 2930C adapters t Adaptec AHA-2x4x[U][2][W] cards and onboard PCI designs using the AIC-7770, AIC-7850, AIC-7860, AIC-7870, AIC-7880 and AIC-789x chipsets t Adaptec AHA-394x[U][W] cards [b] t Adaptec AHA-3950U2 cards t Adaptec AHA-3960, 19160 and 29160 Ultra-160 adapters t NE2000 PCI ethernet adapters t Universal Serial Bus .(bullet -compact UHCI host controllers t OHCI host controllers t Hubs t Keyboards using the boot protocol t Mice t Printers t Generic support for HID devices .bullet) t Video cards .(bullet -compact Diamond Stealth 3D 2000 Pro t ATI Charger 4MB t STB Velocity 128 t Cirrus Logic 5446 t IGS 2010 t IGS 5000 t S3 based interfaces .bullet) .bullet)

p Drivers for hardware marked with .Dq [*] are .Em not present in installation kernels.

p Other PCI devices may be supported by Intel EBSA285 & Chalice CATS but have not been tested.