. Currently, .Nx*M requires the use of Motorola's .Tn "DINK32" ROM to load over a serial port. This means that there is no way to boot from a local disk or PCI device. . .Ss2 Supported processor cards .(bullet -offset indent Unity X4 with MPC8240 t Altimus X3 with either MPC755 or MPC7410 .bullet)
p Other PMCs should work, but may need minor adjustments or more substantial work to support additional functionality. . .Ss2 Supported devices .(bullet -offset indent Ethernet .(bullet -compact Asante Mac 10/100 PCI Rev A, part number 09-00169-01
q Em de t Farallon Fast EtherTX 10/100, part number PN996L-TX
q Em de t SMC Etherpower II (9432TX)
q Em epic t SMC 83c170
q Em epic t 3Com 3c905
q Em ex t Intel EtherExpress PRO/10+ PCI LAN Adapter
q Em fxp t RealTek 8029 Ethernet
q Em ne t VIA Technologies VT86C926
q Em ne t D-Link DFE-530TX+
q Em rtk t RealTek 8139
q Em rtk t Netgear FA-311
q Em sip t Lite-On PNIC
q Em tlp t D-Link DFE-530TX
q Em vr t Many other PCI Ethernet interfaces, such as Tulip-compatible
q Em de No and Em tlp , 3Com
q Em ep , SMC
q Em epic , Intel
q Em fxp , NE2000-compatible
q Em ne , and RealTek
q Em rtk .bullet) t SCSI .(bullet -compact Adaptec PCI controllers 291x, 2920, 2930C, 294x, 295x, 39xx, 19160, 29160 and AIC-78xx
q Em ahc t AdvanSys ABP-940UW[68], ABP-970UW[68], ASB3940UW-00 SCSI host adapters
q Em adw t AdvanSys 1200[A,B], 9xx[U,UA] SCSI controller
q Em adv t AMD 53c974
q Em pcscp t DPT SmartCache/SmartRAID
q Em siop No or Em esiop t Many other PCI SCSI controllers should work, but no one has tried them t Most SCSI disk/tape/CD-ROM devices should work .bullet) t IDE .(bullet -compact Promise Ultra66
q Em pciide t Some other PCI IDE controllers should work, although no one has had much success t Most IDE disk/CD-ROM/ATAPI devices should work .bullet) t Audio .(bullet -compact PCI audio cards, although none have been tested. .bullet) t Serial ports .(bullet -compact On-board serial ports (the modem and printer ports)
q Em com0 No and Em com1 t Some PCI serial ports should work, but no one has tried them .bullet) t PCI cards .(bullet -compact Most MI PCI cards should work, although very few have been tested with .Nx*M .Lk http://www.netbsd.org/Hardware/pci.html .bullet) .bullet) . .Ss2 Unsupported devices .(bullet -offset indent Built-in PS/2 keyboard & mouse t Built-in parallel t Built-in floppy t Built-in IDE .bullet) . .Ss2 Supported boot devices and media . Currently, the only way to boot the system is with the DINK32 ROM monitor's serial download or a JTAG device.