xref: /netbsd/sys/arch/amiga/conf/GENERIC (revision c4a72b64)
1# $NetBSD: GENERIC,v 1.191 2002/11/22 12:23:26 wiz Exp $
2#
3# This file was automatically created.
4# Changes will be lost when make is run in this directory.
5#
6# Created from: # NetBSD: GENERIC.in,v 1.9 2002/11/22 12:20:59 wiz Exp $
7#
8# GENERIC machine description file
9#
10# This machine description file is used to generate the default NetBSD
11# kernel.  The generic kernel does not include all options, subsystems
12# and device drivers, but should be useful for most applications.
13#
14# The machine description file can be customised for your specific
15# machine to reduce the kernel size and improve its performance.
16#
17# For further information on compiling NetBSD kernels, see the config(8)
18# man page.
19#
20# For further information on hardware support for this architecture, see
21# the intro(4) man page.  For further information about kernel options
22# for this architecture, see the options(4) man page.  For an explanation
23# of each device driver in this file see the section 4 man page for the
24# device.
25
26
27include "arch/amiga/conf/std.amiga"
28
29options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
30
31#ident 		"GENERIC-$Revision: 1.191 $"
32
33
34maxusers	8
35options 	RTC_OFFSET=0
36
37#
38# mainboards to support (in addition to Amiga)
39#
40options 	DRACO
41options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
42				# MC68060 with an OS ROM up to (at least)
43				# V40 (OS3.1) and want to boot with the
44				# bootblock.
45				# You do not need this if you have a DraCo,
46				# have no 68060 or NEVER use the bootblock
47options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
48#
49# processors this kernel should support
50#
51options 	M68060		# support for 060
52options 	M060SP		# MC68060 software support (Required for 060)
53options 	M68040		# support for 040
54options 	FPSP		# MC68040 floating point support
55options 	M68030		# support for 030
56options 	M68020		# support for 020/851
57options 	FPU_EMULATE	# FPU emulation
58
59#
60# Networking options
61#
62options 	INET		# IP networking support (Required)
63options 	INET6		# IPV6
64#options 	IPSEC		# IP security
65#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
66#options 	IPSEC_DEBUG	# debug for IP security
67#options 	GATEWAY		# Packet forwarding
68#options 	DIRECTED_BROADCAST	# Broadcast across subnets
69
70#options 	MROUTING	# Multicast routing
71options 	NS		# XNS
72#options 	NSIP		# XNS tunneling over IP
73options 	ISO,TPIP	# OSI
74#options 	EON		# OSI tunneling over IP
75options 	CCITT,LLC,HDLC	# X.25
76options 	NETATALK	# AppleTalk networking protocols
77#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
78
79options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
80options 	PPP_DEFLATE	# Deflate compression support for PPP
81options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
82options 	PFIL_HOOKS	# pfil(9) packet filter hooks
83options 	IPFILTER_LOG	# ipmon(8) log support
84#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
85
86# Filesystems
87file-system 	FFS		# Berkeley fast file system
88file-system 	EXT2FS		# second extended file system (linux)
89#file-system 	LFS		# log-structured filesystem (experimental)
90
91file-system 	MFS		# Memory based filesystem
92
93file-system 	NFS		# Network File System client side code
94file-system 	ADOSFS		# AmigaDOS file system
95file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
96file-system 	MSDOSFS		# MS-DOS filesystem
97
98file-system 	KERNFS		# kernel data-structure filesystem
99
100file-system 	FDESC		# user file descriptor filesystem
101file-system 	NULLFS		# loopback filesystem
102file-system 	OVERLAY		# overlay filesystem
103#file-system 	PORTAL		# Portal filesystem
104file-system 	PROCFS		# /proc filesystem
105file-system 	UMAPFS		# NULLFS + uid and gid remapping
106file-system 	UNION		# union filesystem
107
108# Filesystem options
109
110#options 	FFS_EI		# FFS Endian Independant support
111
112options 	QUOTA		# User and group quotas in FFS
113options 	SOFTDEP		# FFS soft updates support.
114options 	NFSSERVER	# Network File System server side code
115
116#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
117				# immutable) behave as system flags.
118
119#
120# Compatibility options for various existing systems
121#
122
123#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
124options 	COMPAT_43	# compatibility with 4.3BSD interfaces
125options 	COMPAT_09	# compatibility with NetBSD 0.9
126options 	COMPAT_10	# compatibility with NetBSD 1.0
127options 	COMPAT_12	# compatibility with NetBSD 1.2
128options 	COMPAT_13	# compatibility with NetBSD 1.3
129options 	COMPAT_14	# compatibility with NetBSD 1.4
130options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
131options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
132options 	COMPAT_NOMID	# allow nonvalid machine id executables
133#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
134
135options 	EXEC_AOUT	# 32-bit aout executables (NetBSD-1.5.x)
136options 	COMPAT_AOUT_M68K # actually make some system calls work.
137
138#
139# Support for System V IPC facilities.
140#
141options 	SYSVSHM		# System V-like shared memory
142options 	SYSVMSG		# System V-like messages
143options 	SYSVSEM		# System V-like semaphores
144#options 	SEMMNI=10	# number of semaphore identifiers
145#options 	SEMMNS=60	# number of semaphores in system
146#options 	SEMUME=10	# max number of undo entries per process
147#options 	SEMMNU=30	# number of undo structures in system
148
149#
150# Support for various kernel options
151#
152
153options 	KTRACE		# system call tracing support
154options 	SYSTRACE	# system call vetting via systrace(1)
155options 	LKM		# Loadable kernel modules
156options 	UCONSOLE	# anyone can redirect a virtual console
157#options 	INSECURE	# disable kernel security levels
158options 	SCSIVERBOSE	# human readable SCSI error messages
159options 	USERCONF	# userconf(4) support
160options 	NTP		# NTP phase/frequency locked loop
161#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
162
163# Enable experimental buffer queue strategy for better responsiveness under
164# high disk I/O load. Use it with caution - it's not proven to be stable yet.
165#options 	NEW_BUFQ_STRATEGY
166
167#
168# Misc. debugging options
169#
170options 	DDB		# Kernel debugger
171#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
172options 	DIAGNOSTIC	# Extra kernel sanity checks
173#options 	DEBUG		# Enable misc. kernel debugging code
174#options 	SYSCALL_DEBUG	# debug all syscalls.
175#options 	SCSIDEBUG	# Add SCSI debugging statements
176#options 	PANICBUTTON	# Forced crash via keypress (?)
177
178#
179# Amiga specific options
180#
181#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
182				# first bank of RAM. (default: unlimited)
183#options 	NKPTADD=4	# set this for 4 additional KPT pages
184#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
185				# per 16 MB (1<<24 bytes) of RAM
186				# uncomment and decrease this, or uncomment and
187				# increase NKPTADD if you get "out of PT pages"
188				# panics.
189
190# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
191# before the 10 secondinterval ends, or that KBDRESET does work at all.
192#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga
193
194# These options improve performance with the built-in serial port
195# on slower Amigas.  Try the larger buffers first then lev6_defer.
196#options 	SERIBUF_SIZE=4096
197#options 	SEROBUF_SIZE=32
198#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)
199
200options 	RETINACONSOLE	# enable code to allow retina to be console
201options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
202options 	CL5426CONSOLE	# Cirrus console
203options 	CV64CONSOLE	# CyberVision console
204options 	TSENGCONSOLE	# Tseng console
205options 	CV3DCONSOLE	# CyberVision 64/3D console
206
207options 	GRF_ECS		# Enhanced Chip Set
208options 	GRF_NTSC	# NTSC
209options 	GRF_PAL		# PAL
210options 	GRF_A2024	# Support for the A2024
211options 	GRF_AGA		# AGA Chip Set
212options 	GRF_AGA_VGA	# AGA VGAONLY timing
213options 	GRF_SUPER72	# AGA Super-72
214#options 	KFONT_8X11	# 8x11 font
215
216# select a font for the console according to the character set and keymap
217# you want to use
218options        KFONT_CONS_ISO8859_1
219#options         KFONT_CONS_ISO8859_2
220
221# This is how you would tell the kernel the A2410 oscillator frequencies:
222# The used frequencies are the defaults, and do not need option setting
223#options 	ULOWELL_OSC1=36000000
224#options 	ULOWELL_OSC2=66667000
225
226# This is how you specify the blitting speed, higher values may speed up blits
227# a littel bit.  If you raise this value too much some trash may appear.
228# the commented version is the default.
229#options 	RH_MEMCLK=61000000
230# this option enables the 64 bit sprite which does not work
231# for quite a few people.  E.g. The cursor sprite will turn to a block
232# when moved to the top of the screen in X.
233#options 	RH_64BIT_SPRITE
234# enables fast scroll code appears to now work on 040 systems.
235#options 	RETINA_SPEED_HACK
236# enables the Hardwarecursor which does not work on some systems.
237#options 	RH_HARDWARECURSOR
238
239# wscons aware interface to amiga custom chips.
240# If you enable it enable also wskbd.
241#
242
243#amidisplaycc0	at mainbus0		# wscons interface to custom chips
244#wsdisplay0	at amidisplaycc0 console ?
245#options 	WSEMUL_VT100
246#options 	FONT_BOLD8x16
247#options 	FONT_VT220L8x10
248
249grfcc0		at mainbus0		# custom chips
250grfrt0		at zbus0		# retina II
251grfrh0		at zbus0		# retina III
252grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
253grful0		at zbus0		# A2410
254grfcv0		at zbus0		# CyberVision 64
255grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
256grfcv3d0	at zbus0		# CyberVision 64/3D
257
258grf0		at grfcc0
259grf1		at grfrt0
260grf2		at grfrh0
261grf3		at grfcl?
262grf4		at grful0
263grf5		at grfcv0
264grf6		at grfet?
265grf7		at grfcv3d0
266ite0		at grf0			# terminal emulators for grfs
267ite1		at grf1			# terminal emulators for grfs
268ite2		at grf2			# terminal emulators for grfs
269ite3		at grf3			# terminal emulators for grfs
270ite4		at grf4			# terminal emulators for grfs
271ite5		at grf5			# terminal emulators for grfs
272ite6		at grf6			# terminal emulators for grfs
273ite7		at grf7			# terminal emulators for grfs
274
275msc0		at zbus0		# A2232 MSC multiport serial.
276mfc0		at zbus0		# MultiFaceCard I/O board
277mfcs0		at mfc0 unit 0		# MFC serial
278mfcs1		at mfc0 unit 1		# MFC serial
279#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
280#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
281#mfcs2		at mfc1 unit 0
282#mfcs3		at mfc1 unit 1
283#mfcp1		at mfc1 unit 0
284
285hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
286#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
287com*		at hyper? port ?	# Hypercom3/4 serial ports
288lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
289
290#options 	IOBZCLOCK=22118400 	# default, uncomment the next line
291#options 	IOBZCLOCK=24000000	# if needed.
292
293iobl*		at zbus?		# zbus IOBlix
294com*		at iobl? port ?		# IOBlix serial ports
295lpt*		at iobl? port ?		# IOBlix parallel ports
296
297
298#
299# Keyboard device. Optionally can attach a wskbd.
300# wskbd works together with a wsdisplay so enable them both if you will.
301# Don't enable wskbd if you use ite.
302#
303# XXX in std.amiga: kbd0 at mainbus0
304
305#wskbd0		at kbd0 console ?
306
307
308#
309# Amiga Mainboard devices (sans graphics and keyboard)
310#
311
312ser0		at mainbus0		# Amiga onboard serial
313par0		at mainbus0		# Amiga onboard parallel
314ms*		at mainbus0		# Amiga mice
315fdc0		at mainbus0		# Amiga FDC
316fd*		at fdc0 unit ?		# floppy disks on the later
317a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
318a2kbbc0 	at mainbus0		# A2000 battery backed clock
319aucc*		at mainbus0		# Amiga CC audio
320audio*		at aucc?
321
322#
323# DraCo Mainboard devices (sans keyboard)
324#
325
326drbbc0		at mainbus0		# DraCo battery backed clock
327drsupio0	at mainbus0		# DraCo superio chip
328com*		at drsupio? port ?	# DraCo serial
329lpt0		at drsupio? port ?	# DraCo parallel
330
331#
332# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
333#
334
335
336repulse*	at zbus0		# ALiENDESiGN Repulse
337audio*		at repulse?
338
339toccata*	at zbus0		# MacroSystem GmbH Toccata
340audio*		at toccata?
341
342# Ethernet cards:
343le*		at zbus0		# A2065, Ameristar, Ariadne
344ne*		at zbus0		# AriadneII, X-surf
345ed*		at zbus0		# Hydra, ASDG LanRover
346es*		at zbus0		# CEI A4066 EthernetPLUS
347qn*		at zbus0		# Quicknet
348
349# Arcnet
350bah*		at zbus0		# C=/Ameristar A2060 / 560
351
352# Greater Valley Product Bus
353gvpbus* 	at zbus0
354
355# scsi stuff, all possible
356gtsc0		at gvpbus?		# GVP series II scsi
357scsibus*	at gtsc0
358ahsc0		at mainbus0		# A3000 scsi
359scsibus*	at ahsc0
360atzsc0		at zbus0		# A2091 scsi
361scsibus*	at atzsc0
362wstsc0		at zbus0		# Wordsync II scsi
363scsibus*	at wstsc0
364ivsc0		at zbus0		# IVS scsi
365scsibus*	at ivsc0
366mlhsc0		at zbus0		# Hacker scsi
367scsibus*	at mlhsc0
368otgsc0		at zbus0		# 12 gauge scsi
369scsibus*	at otgsc0
370zssc0		at zbus0		# Zeus scsi
371scsibus*	at zssc0
372mgnsc0		at zbus0		# Magnum scsi
373scsibus*	at mgnsc0
374wesc0		at zbus0		# Warp Engine scsi
375scsibus*	at wesc0
376afsc0		at zbus0		# A4091 scsi
377scsibus*	at afsc0
378aftsc0		at mainbus0		# A4000T scsi
379scsibus*	at aftsc0
380flsc0		at zbus0		# FastlaneZ3 scsi
381scsibus*	at flsc0
382bzsc0		at zbus0		# Blizzard 1230 I,II scsi
383scsibus*	at bzsc0
384bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
385scsibus*	at bzivsc0
386bztzsc0 	at zbus0		# Blizzard 2060 scsi
387scsibus*	at bztzsc0
388cbsc0		at zbus0		# CyberSCSI I
389scsibus*	at cbsc0
390cbiisc0 	at zbus0		# CyberSCSI II
391scsibus*	at cbiisc0
392cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
393scsibus*	at cbiiisc0
394empsc0		at zbus0		# Emplant scsi
395scsibus*	at empsc0
396#idesc0		at mainbus0		# A4000 & A1200 IDE
397#scsibus*	at idesc0
398
399# <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
400# <<< are uncommented >>>
401wdc0		at mainbus0		# A4000 & A1200 IDE bus
402wd*		at wdc? drive ?		#  + drives
403atapibus*	at wdc? channel ?	# ATAPI bus
404cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
405sd*		at atapibus? drive ?	# ATAPI disk drives
406
407pccard0		at mainbus0
408pcmcia*		at pccard0
409com*		at pcmcia? function ?		# Modems and serial cards
410pcmcom*		at pcmcia? function ?		# PCMCIA multi-port serial cards
411aic*		at pcmcia? function ?		# Adaptec APA-1460 SCSI
412wdc*		at pcmcia? function ?
413awi*		at pcmcia? function ?		# BayStack 650 (802.11FH)
414ep*		at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
415mbe*		at pcmcia? function ?		# MB8696x based Ethernet
416ne*		at pcmcia? function ?		# NE2000-compatible Ethernet
417sm*		at pcmcia? function ?		# Megahertz Ethernet
418mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
419com*		at mhzc?
420sm*		at mhzc?
421
422
423drsc0		at mainbus0		# DraCo scsi
424scsibus*	at drsc0
425
426
427# each hard drive from low target to high
428# will configure to the next available sd unit number
429sd*	at scsibus? target ? lun ?	# scsi disks
430st*	at scsibus? target ? lun ?	# scsi tapes
431cd*	at scsibus? target ? lun ?	# scsi cds
432ch*	at scsibus? target ? lun ?	# scsi autochangers
433ss*	at scsibus? target ? lun ?	# scsi scanner
434uk*	at scsibus? target ? lun ?	# scsi unknown
435
436pseudo-device	loop			# loopback network interface
437pseudo-device	sl		1	# SLIP network interfaces
438pseudo-device	ppp		1	# PPP network interfaces
439pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
440pseudo-device	tun		1	# network tunnel line discipline
441#pseudo-device	gre		2	# generic L3 over IP tunnel
442pseudo-device	bpfilter	16	# Berkeley packet filter
443pseudo-device	ipfilter		# IP Filter package
444pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
445#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
446#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
447pseudo-device	vlan			# IEEE 802.1q encapsulation
448pseudo-device	bridge			# simple inter-network bridging
449
450pseudo-device	view		4	# views (needed for grfcc)
451pseudo-device	pty			# pseudo-terminals
452pseudo-device	clockctl		# user control of clock subsystem
453
454pseudo-device	vnd		4	# vnode pseudo-disks
455pseudo-device	ccd		4	# concatenated disk devices
456#pseudo-device	cgd		4	# cryptographic disk devices
457pseudo-device	raid		8	# RAIDframe disk driver
458options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
459# Options to enable various other RAIDframe RAID types.
460# options 	RF_INCLUDE_EVENODD=1
461# options 	RF_INCLUDE_RAID5_RS=1
462# options 	RF_INCLUDE_PARITYLOGGING=1
463# options 	RF_INCLUDE_CHAINDECLUSTER=1
464# options 	RF_INCLUDE_INTERDECLUSTER=1
465# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
466# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
467
468pseudo-device	rnd			# /dev/random and in-kernel generator
469#options 	RND_COM			# use "com" randomness as well (BROKEN)
470
471config	netbsd root on ? type ?
472