xref: /netbsd/sys/arch/bebox/pci/pci_machdep.c (revision c4a72b64)
1 /*	$NetBSD: pci_machdep.c,v 1.12 2002/09/27 15:35:55 provos Exp $	*/
2 
3 /*
4  * Copyright (c) 1996 Christopher G. Demetriou.  All rights reserved.
5  * Copyright (c) 1994 Charles M. Hannum.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by Charles M. Hannum.
18  * 4. The name of the author may not be used to endorse or promote products
19  *    derived from this software without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 /*
34  * Machine-specific functions for PCI autoconfiguration.
35  *
36  * On PCs, there are two methods of generating PCI configuration cycles.
37  * We try to detect the appropriate mechanism for this machine and set
38  * up a few function pointers to access the correct method directly.
39  *
40  * The configuration method can be hard-coded in the config file by
41  * using `options PCI_CONF_MODE=N', where `N' is the configuration mode
42  * as defined section 3.6.4.1, `Generating Configuration Cycles'.
43  */
44 
45 #include <sys/types.h>
46 #include <sys/param.h>
47 #include <sys/extent.h>
48 #include <sys/time.h>
49 #include <sys/systm.h>
50 #include <sys/errno.h>
51 #include <sys/device.h>
52 
53 #include <uvm/uvm_extern.h>
54 
55 #define _POWERPC_BUS_DMA_PRIVATE
56 #include <machine/bus.h>
57 #include <machine/pio.h>
58 #include <machine/intr.h>
59 
60 #include <dev/isa/isavar.h>
61 #include <dev/pci/pcivar.h>
62 #include <dev/pci/pcireg.h>
63 #include <dev/pci/pciconf.h>
64 
65 #include <bebox/isa/icu.h>
66 
67 struct powerpc_bus_dma_tag pci_bus_dma_tag = {
68 	0,			/* _bounce_thresh */
69 	_bus_dmamap_create,
70 	_bus_dmamap_destroy,
71 	_bus_dmamap_load,
72 	_bus_dmamap_load_mbuf,
73 	_bus_dmamap_load_uio,
74 	_bus_dmamap_load_raw,
75 	_bus_dmamap_unload,
76 	NULL,			/* _dmamap_sync */
77 	_bus_dmamem_alloc,
78 	_bus_dmamem_free,
79 	_bus_dmamem_map,
80 	_bus_dmamem_unmap,
81 	_bus_dmamem_mmap,
82 };
83 
84 #define	PCI_MODE1_ENABLE	0x80000000UL
85 #define	PCI_MODE1_ADDRESS_REG	(BEBOX_BUS_SPACE_IO + 0x0cf8)
86 #define	PCI_MODE1_DATA_REG	(BEBOX_BUS_SPACE_IO + 0x0cfc)
87 
88 void
89 pci_attach_hook(parent, self, pba)
90 	struct device *parent, *self;
91 	struct pcibus_attach_args *pba;
92 {
93 }
94 
95 int
96 pci_bus_maxdevs(pc, busno)
97 	pci_chipset_tag_t pc;
98 	int busno;
99 {
100 
101 	/*
102 	 * Bus number is irrelevant.  Configuration Mechanism 1 is in
103 	 * use, can have devices 0-32 (i.e. the `normal' range).
104 	 */
105 	return (32);
106 }
107 
108 pcitag_t
109 pci_make_tag(pc, bus, device, function)
110 	pci_chipset_tag_t pc;
111 	int bus, device, function;
112 {
113 	pcitag_t tag;
114 
115 	if (bus >= 256 || device >= 32 || function >= 8)
116 		panic("pci_make_tag: bad request");
117 
118 	tag = PCI_MODE1_ENABLE |
119 		    (bus << 16) | (device << 11) | (function << 8);
120 	return tag;
121 }
122 
123 void
124 pci_decompose_tag(pc, tag, bp, dp, fp)
125 	pci_chipset_tag_t pc;
126 	pcitag_t tag;
127 	int *bp, *dp, *fp;
128 {
129 
130 	if (bp != NULL)
131 		*bp = (tag >> 16) & 0xff;
132 	if (dp != NULL)
133 		*dp = (tag >> 11) & 0x1f;
134 	if (fp != NULL)
135 		*fp = (tag >> 8) & 0x7;
136 	return;
137 }
138 
139 pcireg_t
140 pci_conf_read(pc, tag, reg)
141 	pci_chipset_tag_t pc;
142 	pcitag_t tag;
143 	int reg;
144 {
145 	pcireg_t data;
146 
147 	out32rb(PCI_MODE1_ADDRESS_REG, tag | reg);
148 	data = in32rb(PCI_MODE1_DATA_REG);
149 	out32rb(PCI_MODE1_ADDRESS_REG, 0);
150 	return data;
151 }
152 
153 void
154 pci_conf_write(pc, tag, reg, data)
155 	pci_chipset_tag_t pc;
156 	pcitag_t tag;
157 	int reg;
158 	pcireg_t data;
159 {
160 
161 	out32rb(PCI_MODE1_ADDRESS_REG, tag | reg);
162 	out32rb(PCI_MODE1_DATA_REG, data);
163 	out32rb(PCI_MODE1_ADDRESS_REG, 0);
164 }
165 
166 int
167 pci_intr_map(pa, ihp)
168 	struct pci_attach_args *pa;
169 	pci_intr_handle_t *ihp;
170 {
171 	int pin = pa->pa_intrpin;
172 	int line = pa->pa_intrline;
173 
174 	if (pin == 0) {
175 		/* No IRQ used. */
176 		goto bad;
177 	}
178 
179 	if (pin > 4) {
180 		printf("pci_intr_map: bad interrupt pin %d\n", pin);
181 		goto bad;
182 	}
183 
184 	/*
185 	 * Section 6.2.4, `Miscellaneous Functions', says that 255 means
186 	 * `unknown' or `no connection' on a PC.  We assume that a device with
187 	 * `no connection' either doesn't have an interrupt (in which case the
188 	 * pin number should be 0, and would have been noticed above), or
189 	 * wasn't configured by the BIOS (in which case we punt, since there's
190 	 * no real way we can know how the interrupt lines are mapped in the
191 	 * hardware).
192 	 *
193 	 * XXX
194 	 * Since IRQ 0 is only used by the clock, and we can't actually be sure
195 	 * that the BIOS did its job, we also recognize that as meaning that
196 	 * the BIOS has not configured the device.
197 	 */
198 	if (line == 0 || line == 255) {
199 		printf("pci_intr_map: no mapping for pin %c\n", '@' + pin);
200 		goto bad;
201 	} else {
202 		if (line >= ICU_LEN) {
203 			printf("pci_intr_map: bad interrupt line %d\n", line);
204 			goto bad;
205 		}
206 		if (line == IRQ_SLAVE) {
207 			printf("pci_intr_map: changed line 2 to line 9\n");
208 			line = 9;
209 		}
210 	}
211 
212 	*ihp = line;
213 	return 0;
214 
215 bad:
216 	*ihp = -1;
217 	return 1;
218 }
219 
220 const char *
221 pci_intr_string(pc, ih)
222 	pci_chipset_tag_t pc;
223 	pci_intr_handle_t ih;
224 {
225 	static char irqstr[8];		/* 4 + 2 + NULL + sanity */
226 
227 	if (ih == 0 || ih >= ICU_LEN || ih == IRQ_SLAVE)
228 		panic("pci_intr_string: bogus handle 0x%x", ih);
229 
230 	sprintf(irqstr, "irq %d", ih);
231 	return (irqstr);
232 
233 }
234 
235 const struct evcnt *
236 pci_intr_evcnt(pc, ih)
237 	pci_chipset_tag_t pc;
238 	pci_intr_handle_t ih;
239 {
240 
241 	/* XXX for now, no evcnt parent reported */
242 	return NULL;
243 }
244 
245 void *
246 pci_intr_establish(pc, ih, level, func, arg)
247 	pci_chipset_tag_t pc;
248 	pci_intr_handle_t ih;
249 	int level, (*func) __P((void *));
250 	void *arg;
251 {
252 
253 	if (ih == 0 || ih >= ICU_LEN || ih == IRQ_SLAVE)
254 		panic("pci_intr_establish: bogus handle 0x%x", ih);
255 
256 	return (void *)intr_establish(ih, IST_LEVEL, level, func, arg);
257 }
258 
259 void
260 pci_intr_disestablish(pc, cookie)
261 	pci_chipset_tag_t pc;
262 	void *cookie;
263 {
264 
265 	intr_disestablish(cookie);
266 }
267 
268 void
269 pci_conf_interrupt(pci_chipset_tag_t pc, int bus, int dev, int pin,
270     int swiz, int *iline)
271 {
272 	if (bus == 0) {
273 		switch (dev) {
274 		case 12: /*       SCSI is bit 10, mapped to IRQ 20 */
275 		case 13: /* PCI slot 1 is bit 11, mapped to IRQ 21 */
276 		case 14: /* PCI slot 2 is bit 12, mapped to IRQ 22 */
277 		case 15: /* PCI slot 3 is bit 13, mapped to IRQ 23 */
278 			*iline = dev + 8;
279 		}
280 	} else {
281 		*iline = 20 + ((swiz + dev + 1) & 3);
282 	}
283 }
284