xref: /netbsd/sys/arch/evbarm/dev/plcomvar.h (revision 6550d01e)
1 /*	$NetBSD: plcomvar.h,v 1.6 2008/01/05 12:40:34 ad Exp $	*/
2 
3 /*
4  * Copyright (c) 1996 Christopher G. Demetriou.  All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. All advertising materials mentioning features or use of this software
15  *    must display the following acknowledgement:
16  *      This product includes software developed by Christopher G. Demetriou
17  *	for the NetBSD Project.
18  * 4. The name of the author may not be used to endorse or promote products
19  *    derived from this software without specific prior written permission
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 #include "rnd.h"
34 #include "opt_multiprocessor.h"
35 #include "opt_lockdebug.h"
36 #include "opt_plcom.h"
37 #include "opt_kgdb.h"
38 
39 #if NRND > 0 && defined(RND_COM)
40 #include <sys/rnd.h>
41 #endif
42 
43 #include <sys/callout.h>
44 #include <sys/timepps.h>
45 #include <sys/simplelock.h>
46 
47 int  plcomcnattach	(bus_space_tag_t, bus_addr_t, int, int, tcflag_t, int);
48 void plcomcndetach	(void);
49 
50 #ifdef KGDB
51 int  plcom_kgdb_attach	(bus_space_tag_t, bus_addr_t, int, int, tcflag_t);
52 #endif
53 
54 int  plcom_is_console	(bus_space_tag_t, int, bus_space_handle_t *);
55 
56 /* Hardware flag masks */
57 #define	PLCOM_HW_NOIEN		0x01
58 #define	PLCOM_HW_FIFO		0x02
59 #define	PLCOM_HW_HAYESP		0x04
60 #define	PLCOM_HW_FLOW		0x08
61 #define	PLCOM_HW_DEV_OK		0x20
62 #define	PLCOM_HW_CONSOLE	0x40
63 #define	PLCOM_HW_KGDB		0x80
64 #define	PLCOM_HW_TXFIFO_DISABLE	0x100
65 
66 /* Buffer size for character buffer */
67 #define	PLCOM_RING_SIZE		2048
68 
69 struct plcom_softc {
70 	struct device sc_dev;
71 	void *sc_si;
72 	struct tty *sc_tty;
73 
74 	struct callout sc_diag_callout;
75 
76 	bus_addr_t sc_iounit;
77 	int sc_frequency;
78 
79 	bus_space_tag_t sc_iot;
80 	bus_space_handle_t sc_ioh;
81 
82 	u_int sc_overflows,
83 	      sc_floods,
84 	      sc_errors;
85 
86 	int sc_hwflags,
87 	    sc_swflags;
88 	u_int sc_fifolen;
89 
90 	u_int sc_r_hiwat,
91 	      sc_r_lowat;
92 	u_char *volatile sc_rbget,
93 	       *volatile sc_rbput;
94  	volatile u_int sc_rbavail;
95 	u_char *sc_rbuf,
96 	       *sc_ebuf;
97 
98  	u_char *sc_tba;
99  	u_int sc_tbc,
100 	      sc_heldtbc;
101 
102 	volatile u_char sc_rx_flags,
103 #define	RX_TTY_BLOCKED		0x01
104 #define	RX_TTY_OVERFLOWED	0x02
105 #define	RX_IBUF_BLOCKED		0x04
106 #define	RX_IBUF_OVERFLOWED	0x08
107 #define	RX_ANY_BLOCK		0x0f
108 			sc_tx_busy,
109 			sc_tx_done,
110 			sc_tx_stopped,
111 			sc_st_check,
112 			sc_rx_ready;
113 
114 	volatile u_char sc_heldchange;
115 	volatile u_char sc_msr, sc_msr_delta, sc_msr_mask, sc_mcr,
116 	    sc_mcr_active, sc_lcr, sc_cr, sc_dlbl, sc_dlbh;
117 	u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd;
118 	u_int sc_fifo;
119 
120 	/* Support routine to program mcr lines, if present.  */
121 	void	(*sc_set_mcr)(void *, int, u_int);
122 	void	*sc_set_mcr_arg;
123 
124 	/* power management hooks */
125 	int (*enable) (struct plcom_softc *);
126 	void (*disable) (struct plcom_softc *);
127 	int enabled;
128 
129 	/* PPS signal on DCD, with or without inkernel clock disciplining */
130 	u_char	sc_ppsmask;			/* pps signal mask */
131 	u_char	sc_ppsassert;			/* pps leading edge */
132 	u_char	sc_ppsclear;			/* pps trailing edge */
133 	pps_info_t ppsinfo;
134 	pps_params_t ppsparam;
135 
136 #if NRND > 0 && defined(RND_COM)
137 	rndsource_element_t  rnd_source;
138 #endif
139 	struct simplelock	sc_lock;
140 };
141 
142 int  plcomprobe1	(bus_space_tag_t, bus_space_handle_t);
143 int  plcomintr		(void *);
144 void plcom_attach_subr	(struct plcom_softc *);
145 int  plcom_detach	(struct device *, int);
146 int  plcom_activate	(struct device *, enum devact);
147 
148