1 /* $NetBSD: plcomvar.h,v 1.1 2001/10/27 16:22:07 rearnsha Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Christopher G. Demetriou. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Christopher G. Demetriou 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "rnd.h" 34 #include "opt_multiprocessor.h" 35 #include "opt_lockdebug.h" 36 #include "opt_plcom.h" 37 #include "opt_kgdb.h" 38 39 #if NRND > 0 && defined(RND_COM) 40 #include <sys/rnd.h> 41 #endif 42 43 #include <sys/callout.h> 44 #include <sys/timepps.h> 45 #if (defined(MULTIPROCESSOR) || defined(LOCKDEBUG)) && defined(COM_MPLOCK) 46 #include <sys/lock.h> 47 #endif 48 49 int plcomcnattach (bus_space_tag_t, bus_addr_t, int, int, tcflag_t, int); 50 void plcomcndetach (void); 51 52 #ifdef KGDB 53 int plcom_kgdb_attach (bus_space_tag_t, bus_addr_t, int, int, tcflag_t); 54 #endif 55 56 int plcom_is_console (bus_space_tag_t, int, bus_space_handle_t *); 57 58 /* Hardware flag masks */ 59 #define PLCOM_HW_NOIEN 0x01 60 #define PLCOM_HW_FIFO 0x02 61 #define PLCOM_HW_HAYESP 0x04 62 #define PLCOM_HW_FLOW 0x08 63 #define PLCOM_HW_DEV_OK 0x20 64 #define PLCOM_HW_CONSOLE 0x40 65 #define PLCOM_HW_KGDB 0x80 66 #define PLCOM_HW_TXFIFO_DISABLE 0x100 67 68 /* Buffer size for character buffer */ 69 #define PLCOM_RING_SIZE 2048 70 71 struct plcom_softc { 72 struct device sc_dev; 73 void *sc_si; 74 struct tty *sc_tty; 75 76 struct callout sc_diag_callout; 77 78 bus_addr_t sc_iounit; 79 int sc_frequency; 80 81 bus_space_tag_t sc_iot; 82 bus_space_handle_t sc_ioh; 83 84 u_int sc_overflows, 85 sc_floods, 86 sc_errors; 87 88 int sc_hwflags, 89 sc_swflags; 90 u_int sc_fifolen; 91 92 u_int sc_r_hiwat, 93 sc_r_lowat; 94 u_char *volatile sc_rbget, 95 *volatile sc_rbput; 96 volatile u_int sc_rbavail; 97 u_char *sc_rbuf, 98 *sc_ebuf; 99 100 u_char *sc_tba; 101 u_int sc_tbc, 102 sc_heldtbc; 103 104 volatile u_char sc_rx_flags, 105 #define RX_TTY_BLOCKED 0x01 106 #define RX_TTY_OVERFLOWED 0x02 107 #define RX_IBUF_BLOCKED 0x04 108 #define RX_IBUF_OVERFLOWED 0x08 109 #define RX_ANY_BLOCK 0x0f 110 sc_tx_busy, 111 sc_tx_done, 112 sc_tx_stopped, 113 sc_st_check, 114 sc_rx_ready; 115 116 volatile u_char sc_heldchange; 117 volatile u_char sc_msr, sc_msr_delta, sc_msr_mask, sc_mcr, 118 sc_mcr_active, sc_lcr, sc_cr, sc_dlbl, sc_dlbh; 119 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 120 u_int sc_fifo; 121 122 /* Support routine to program mcr lines, if present. */ 123 void (*sc_set_mcr)(void *, int, u_int); 124 void *sc_set_mcr_arg; 125 126 /* power management hooks */ 127 int (*enable) (struct plcom_softc *); 128 void (*disable) (struct plcom_softc *); 129 int enabled; 130 131 /* PPS signal on DCD, with or without inkernel clock disciplining */ 132 u_char sc_ppsmask; /* pps signal mask */ 133 u_char sc_ppsassert; /* pps leading edge */ 134 u_char sc_ppsclear; /* pps trailing edge */ 135 pps_info_t ppsinfo; 136 pps_params_t ppsparam; 137 138 #if NRND > 0 && defined(RND_COM) 139 rndsource_element_t rnd_source; 140 #endif 141 #if (defined(MULTIPROCESSOR) || defined(LOCKDEBUG)) && defined(COM_MPLOCK) 142 struct simplelock sc_lock; 143 #endif 144 }; 145 146 /* Macros to clear/set/test flags. */ 147 #define SET(t, f) (t) |= (f) 148 #define CLR(t, f) (t) &= ~(f) 149 #define ISSET(t, f) ((t) & (f)) 150 151 int plcomprobe1 (bus_space_tag_t, bus_space_handle_t); 152 int plcomintr (void *); 153 void plcom_attach_subr (struct plcom_softc *); 154 int plcom_detach (struct device *, int); 155 int plcom_activate (struct device *, enum devact); 156 157 #ifndef __HAVE_GENERIC_SOFT_INTERRUPTS 158 #ifdef __NO_SOFT_SERIAL_INTERRUPT 159 #define IPL_SERIAL IPL_TTY 160 #define splserial() spltty() 161 #define IPL_SOFTSERIAL IPL_TTY 162 #define splsoftserial() spltty() 163 #endif 164 #endif 165