1# $NetBSD: CQREEKSH3,v 1.21 2002/05/09 12:34:20 uch Exp $ 2# 3# GENERIC -- everything that's currently supported 4# 5 6# for big endian 7include "arch/evbsh3/conf/std.evbsh3.eb" 8# for little endian 9#include "arch/evbsh3/conf/std.evbsh3.el" 10 11#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 12 13# Enable the hooks used for initializing the root memory-disk. 14options MEMORY_DISK_HOOKS 15options MEMORY_DISK_IS_ROOT # force root on memory disk 16options MEMORY_DISK_SERVER=0 # no userspace memory disk support 17options MEMORY_DISK_ROOT_SIZE=2400 # size of memory disk, in blocks 18 19options ROMIMAGE 20 21maxusers 32 # estimated number of users 22 23# CPU support. At least one is REQUIRED. 24options SH3 25options SH7708 # 100MHz 26options PCLOCK=15000000 # 15.000MHz 27options IOM_ROM_BEGIN=0x00000000 28options IOM_ROM_SIZE=0x00200000 # 2MB 29options IOM_RAM_BEGIN=0x0c000000 30options IOM_RAM_SIZE=0x00400000 # 4MB 31options LED_ADDR=0xa8000000 32 33options BSC_BCR1_VAL =0x0010 34options BSC_BCR2_VAL =0x3ddc 35options BSC_WCR1_VAL =0x2aaa 36options BSC_WCR2_VAL =0x0246 37options BSC_MCR_VAL =0x0074 38options BSC_RTCSR_VAL =0xa510 39options BSC_RTCNT_VAL =0xa500 # XXX 40options BSC_RTCOR_VAL =0xa53a 41options FRQCR_VAL =0x0102 42 43options HZ=50 # clock interrupt generates every 1/HZ sec 44#options USERCONF # userconf(4) support 45 46# Compatibility options 47options COMPAT_43 # and 4.3BSD 48 49# Executable format options 50options EXEC_COFF # 32-bit COFF executables (sh-compiler) 51 52# File systems 53file-system FFS # UFS 54 55# Kernel root file system and dump configuration. 56config netbsd root on ? type ? 57 58# 59# Device configuration 60# 61mainbus0 at root 62shb* at mainbus? 63wdog0 at shb? 64options SCICONSOLE,SCICN_SPEED=38400 65sci0 at shb? 66 67# Pseudo-Devices 68pseudo-device md 1 # memory disk device (ramdisk) 69pseudo-device pty # pseudo-terminals 70