xref: /netbsd/sys/arch/hp300/include/vmparam.h (revision bf9ec67e)
1 /*	$NetBSD: vmparam.h,v 1.27 2001/11/15 18:06:14 soren Exp $	*/
2 
3 /*
4  * Copyright (c) 1988 University of Utah.
5  * Copyright (c) 1982, 1986, 1990, 1993
6  *	The Regents of the University of California.  All rights reserved.
7  *
8  * This code is derived from software contributed to Berkeley by
9  * the Systems Programming Group of the University of Utah Computer
10  * Science Department.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  * 3. All advertising materials mentioning features or use of this software
21  *    must display the following acknowledgement:
22  *	This product includes software developed by the University of
23  *	California, Berkeley and its contributors.
24  * 4. Neither the name of the University nor the names of its contributors
25  *    may be used to endorse or promote products derived from this software
26  *    without specific prior written permission.
27  *
28  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
29  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
30  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
31  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
32  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
36  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
37  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38  * SUCH DAMAGE.
39  *
40  * from: Utah $Hdr: vmparam.h 1.16 91/01/18$
41  *
42  *	@(#)vmparam.h	8.2 (Berkeley) 4/19/94
43  */
44 
45 #ifndef _HP300_VMPARAM_H_
46 #define	_HP300_VMPARAM_H_
47 
48 /*
49  * Machine dependent constants for HP300
50  */
51 
52 /*
53  * We use 4K pages on the hp300.  Override the PAGE_* definitions
54  * to be compile-time constants.
55  */
56 #define	PAGE_SHIFT	12
57 #define	PAGE_SIZE	(1 << PAGE_SHIFT)
58 #define	PAGE_MASK	(PAGE_SIZE - 1)
59 
60 /*
61  * USRTEXT is the start of the user text/data space, while USRSTACK
62  * is the top (end) of the user stack.  LOWPAGES and HIGHPAGES are
63  * the number of pages from the beginning of the P0 region to the
64  * beginning of the text and from the beginning of the P1 region to the
65  * beginning of the stack respectively.
66  *
67  * NOTE: the ONLY reason that HIGHPAGES is 0x100 instead of UPAGES (3)
68  * is for HPUX compatibility.  Why??  Because HPUX's debuggers
69  * have the user's stack hard-wired at FFF00000 for post-mortems,
70  * and we must be compatible...
71  */
72 #define	USRTEXT		8192			/* Must equal __LDPGSZ */
73 #define	USRSTACK	(-HIGHPAGES*NBPG)	/* Start of user stack */
74 #define	BTOPUSRSTACK	(0x100000-HIGHPAGES)	/* btop(USRSTACK) */
75 #define P1PAGES		0x100000
76 #define	LOWPAGES	0
77 #define HIGHPAGES	(0x100000/NBPG)
78 
79 /*
80  * Virtual memory related constants, all in bytes
81  */
82 #ifndef MAXTSIZ
83 #define	MAXTSIZ		(8*1024*1024)		/* max text size */
84 #endif
85 #ifndef DFLDSIZ
86 #define	DFLDSIZ		(32*1024*1024)		/* initial data size limit */
87 #endif
88 #ifndef MAXDSIZ
89 #define	MAXDSIZ		(64*1024*1024)		/* max data size */
90 #endif
91 #ifndef	DFLSSIZ
92 #define	DFLSSIZ		(512*1024)		/* initial stack size limit */
93 #endif
94 #ifndef	MAXSSIZ
95 #define	MAXSSIZ		MAXDSIZ			/* max stack size */
96 #endif
97 
98 /*
99  * Sizes of the system and user portions of the system page table.
100  */
101 /* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */
102 #define	SYSPTSIZE	(2 * NPTEPG)	/* 8mb */
103 #define	USRPTSIZE 	(1 * NPTEPG)	/* 4mb */
104 
105 /*
106  * PTEs for mapping user space into the kernel for phyio operations.
107  * One page is enough to handle 4Mb of simultaneous raw IO operations.
108  */
109 #ifndef USRIOSIZE
110 #define USRIOSIZE	(1 * NPTEPG)	/* 4mb */
111 #endif
112 
113 /*
114  * PTEs for system V style shared memory.
115  * This is basically slop for kmempt which we actually allocate (malloc) from.
116  */
117 #ifndef SHMMAXPGS
118 #define SHMMAXPGS	1024		/* 4mb */
119 #endif
120 
121 /*
122  * External IO space map size.
123  * By default we make it large enough to map up to 3 DIO-II devices and
124  * the complete DIO space.  For a 320-only configuration (which has no
125  * DIO-II) you could define a considerably smaller region.
126  */
127 #ifndef EIOMAPSIZE
128 #define EIOMAPSIZE	3584		/* 14mb */
129 #endif
130 
131 /*
132  * Mach derived constants
133  */
134 
135 /* user/kernel map constants */
136 #define VM_MIN_ADDRESS		((vaddr_t)0)
137 #define VM_MAXUSER_ADDRESS	((vaddr_t)0xFFF00000)
138 #define VM_MAX_ADDRESS		((vaddr_t)0xFFF00000)
139 #define VM_MIN_KERNEL_ADDRESS	((vaddr_t)0)
140 #define VM_MAX_KERNEL_ADDRESS	((vaddr_t)0xFFFFF000)
141 
142 /* virtual sizes (bytes) for various kernel submaps */
143 #define VM_PHYS_SIZE		(USRIOSIZE*NBPG)
144 
145 /* # of kernel PT pages (initial only, can grow dynamically) */
146 #define VM_KERNEL_PT_PAGES	((vsize_t)2)		/* XXX: SYSPTSIZE */
147 
148 /*
149  * Constants which control the way the VM system deals with memory segments.
150  * The hp300 only has one physical memory segment.
151  */
152 #define	VM_PHYSSEG_MAX		1
153 #define	VM_PHYSSEG_STRAT	VM_PSTRAT_BSEARCH
154 #define	VM_PHYSSEG_NOADD
155 
156 #define	VM_NFREELIST		1
157 #define	VM_FREELIST_DEFAULT	0
158 
159 #define	__HAVE_PMAP_PHYSSEG
160 
161 /*
162  * pmap-specific data stored in the vm_physmem[] array.
163  */
164 struct pmap_physseg {
165 	struct pv_entry *pvent;		/* pv table for this seg */
166 	char *attrs;			/* page attributes for this seg */
167 };
168 
169 #endif /* _HP300_VMPARAM_H_ */
170