1 /* $NetBSD: vrpmureg.h,v 1.4 2001/06/11 06:02:21 enami Exp $ */ 2 3 /*- 4 * Copyright (c) 1999 SATO Kazumi. All rights reserved. 5 * Copyright (c) 1999 PocketBSD Project. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by the PocketBSD project 18 * and its contributors. 19 * 4. Neither the name of the project nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 */ 36 37 /* 38 * PMU (Power Management Unit) Registers definitions. 39 * start 0xB0000A0 (??????) 40 * start 0xF0000C0 (vr4122) 41 */ 42 43 #define PMUINT_REG_W 0x000 /* PMU interrupt/Status Register */ 44 45 #define PMUINT_GPIO3 (1<<15) /* GPIO3 */ 46 #define PMUINT_GPIO2 (1<<14) /* GPIO2 */ 47 #define PMUINT_GPIO1 (1<<13) /* GPIO1 */ 48 #define PMUINT_GPIO0 (1<<12) /* GPIO0 */ 49 #define PMUINT_DCDST (1<<10) /* DCD# */ 50 #define PMUINT_RTC (1<<9) /* RTC Alarm */ 51 #define PMUINT_BATT (1<<8) /* BATTERY LOW */ 52 #define PMUINT_TIMOUTRST (1<<5) /* HAL Timer Reset */ 53 #define PMUINT_RTCRST (1<<4) /* RTC Reset */ 54 #define PMUINT_RSTSWRST (1<<3) /* Reset SW */ 55 #define PMUINT_DMSWRST (1<<2) /* Deadman's SW */ 56 #define PMUINT_BATTINTR (1<<1) /* Low batt during 57 normal operation */ 58 #define PMUINT_POWERSW (1) /* Power Switch */ 59 60 #define PMUINT_ALL (PMUINT_GPIO3|PMUINT_GPIO2|\ 61 PMUINT_GPIO1|PMUINT_GPIO0|\ 62 PMUINT_DCDST|PMUINT_RTC|\ 63 PMUINT_BATT|PMUINT_TIMOUTRST|\ 64 PMUINT_RTCRST|PMUINT_RSTSWRST|\ 65 PMUINT_DMSWRST|PMUINT_BATTINTR|\ 66 PMUINT_POWERSW) 67 68 #define PMUCNT_REG_W 0x002 /* PMU Control Register */ 69 70 #define PMUCNT_GPIO3MASK (1<<15) /* GPIO3 MASK */ 71 #define PMUCNT_GPIO3EN (1<<15) /* GPIO3 Enable */ 72 #define PMUCNT_GPIO3DS (0<<15) /* GPIO3 Disable */ 73 74 #define PMUCNT_GPIO2MASK (1<<14) /* GPIO2 MASK */ 75 #define PMUCNT_GPIO2EN (1<<14) /* GPIO2 Enable */ 76 #define PMUCNT_GPIO2DS (0<<14) /* GPIO2 Disable */ 77 78 #define PMUCNT_GPIO1MASK (1<<13) /* GPIO1 MASK */ 79 #define PMUCNT_GPIO1EN (1<<13) /* GPIO1 Enable */ 80 #define PMUCNT_GPIO1DS (0<<13) /* GPIO1 Disable */ 81 82 #define PMUCNT_GPIO0MASK (1<<12) /* GPIO0 MASK */ 83 #define PMUCNT_GPIO0EN (1<<12) /* GPIO0 Enable */ 84 #define PMUCNT_GPIO0DS (0<<12) /* GPIO0 Disable */ 85 86 #define PMUCNT_GPIO3TRIG (1<<11) /* GPIO3 TRIG */ 87 #define PMUCNT_GPIO3D (1<<11) /* GPIO3 Fall */ 88 #define PMUCNT_GPIO3U (0<<11) /* GPIO3 Raise */ 89 90 #define PMUCNT_GPIO2TRIG (1<<10) /* GPIO2 TRIG */ 91 #define PMUCNT_GPIO2D (1<<10) /* GPIO2 Fall */ 92 #define PMUCNT_GPIO2U (0<<10) /* GPIO2 Raise */ 93 94 #define PMUCNT_GPIO1TRIG (1<<9) /* GPIO1 TRIG */ 95 #define PMUCNT_GPIO1D (1<<9) /* GPIO1 Fall */ 96 #define PMUCNT_GPIO1U (0<<9) /* GPIO1 Raise */ 97 98 #define PMUCNT_GPIO0TRIG (1<<8) /* GPIO0 TRIG */ 99 #define PMUCNT_GPIO0D (1<<8) /* GPIO0 Fall */ 100 #define PMUCNT_GPIO0U (0<<8) /* GPIO0 Raise */ 101 102 #define PMUCNT_HALTIMERRST (1<<2) /* HAL Timer Reset */ 103 #define PMUCNT_ONE (1<<1) /* ALWAYS write 1 */ 104 105 106 #define PMUINT2_REG_W 0x004 /* PMU interrupt/Status Register 2 */ 107 108 #define PMUINT_GPIO12 (1<<15) /* GPIO12 */ 109 #define PMUINT_GPIO11 (1<<14) /* GPIO11 */ 110 #define PMUINT_GPIO10 (1<<13) /* GPIO10 */ 111 #define PMUINT_GPIO9 (1<<12) /* GPIO9 */ 112 113 #define PMUINT2_ALL (PMUINT_GPIO12|PMUINT_GPIO11|\ 114 PMUINT_GPIO10|PMUINT_GPIO9) 115 116 #define PMUCNT2_REG_W 0x006 /* PMU Control Register 2 */ 117 #define PMUCNT_GPIO12MASK (1<<15) /* GPIO12 MASK */ 118 #define PMUCNT_GPIO12EN (1<<15) /* GPIO12 Enable */ 119 #define PMUCNT_GPIO12DS (0<<15) /* GPIO12 Disable */ 120 121 #define PMUCNT_GPIO11MASK (1<<14) /* GPIO11 MASK */ 122 #define PMUCNT_GPIO11EN (1<<14) /* GPIO11 Enable */ 123 #define PMUCNT_GPIO11DS (0<<14) /* GPIO11 Disable */ 124 125 #define PMUCNT_GPIO10MASK (1<<13) /* GPIO10 MASK */ 126 #define PMUCNT_GPIO10EN (1<<13) /* GPIO10 Enable */ 127 #define PMUCNT_GPIO10DS (0<<13) /* GPIO10 Disable */ 128 129 #define PMUCNT_GPIO9MASK (1<<12) /* GPIO9 MASK */ 130 #define PMUCNT_GPIO9EN (1<<12) /* GPIO9 Enable */ 131 #define PMUCNT_GPIO9DS (0<<12) /* GPIO9 Disable */ 132 133 #define PMUCNT_GPIO12TRIG (1<<11) /* GPIO12 TRIG */ 134 #define PMUCNT_GPIO12D (1<<11) /* GPIO12 Fail */ 135 #define PMUCNT_GPIO12U (0<<11) /* GPIO12 Raise */ 136 137 #define PMUCNT_GPIO11TRIG (1<<10) /* GPIO11 TRIG */ 138 #define PMUCNT_GPIO11D (1<<10) /* GPIO11 Fail */ 139 #define PMUCNT_GPIO11U (0<<10) /* GPIO11 Raise */ 140 141 #define PMUCNT_GPIO10TRIG (1<<9) /* GPIO10 TRIG */ 142 #define PMUCNT_GPIO10D (1<<9) /* GPIO10 Fail */ 143 #define PMUCNT_GPIO10U (0<<9) /* GPIO10 Raise */ 144 145 #define PMUCNT_GPIO9TRIG (1<<8) /* GPIO9 TRIG */ 146 #define PMUCNT_GPIO9D (1<<8) /* GPIO9 Fail */ 147 #define PMUCNT_GPIO9U (0<<8) /* GPIO9 Raise */ 148 149 150 #define PMUWAIT_REG_W 0x008 /* PMU Wait Control Register (>= vr4111) */ 151 #define PMUWAIT_DEFAULT 0x2c00 /* 343.75ms */ 152 153 #define PMUDIV_REG_W 0x00C /* PMU Div Mode Register (>= vr4121) */ 154 #define PMUINTRCLKDIV_REG_W 0x00E /* PMU IntrClk Div Mode Register 155 (= vr4122) */ 156 157 /* END vrpmureg.h */ 158