1 /* $NetBSD: ts102reg.h,v 1.6 2000/07/25 09:57:59 toddpw Exp $ */ 2 3 /*- 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Matt Thomas. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 #ifndef _SPARC_DEV_TS102REG_H 39 #define _SPARC_DEV_TS102REG_H 40 41 /* The TS102 consumes a 256MB region of the SPARCbook 3's address space. 42 */ 43 #define TS102_OFFSET_REGISTERS 0x02000000 44 #define TS102_OFFSET_CARD_A_ATTR_SPACE 0x04000000 45 #define TS102_OFFSET_CARD_B_ATTR_SPACE 0x05000000 46 #define TS102_SIZE_ATTR_SPACE 0x01000000 47 #define TS102_OFFSET_CARD_A_IO_SPACE 0x06000000 48 #define TS102_OFFSET_CARD_B_IO_SPACE 0x07000000 49 #define TS102_SIZE_IO_SPACE 0x01000000 50 #define TS102_OFFSET_CARD_A_MEM_SPACE 0x08000000 51 #define TS102_OFFSET_CARD_B_MEM_SPACE 0x0c000000 52 #define TS102_SIZE_MEM_SPACE 0x04000000 53 54 /* There are two separate register blocks within the TS102. The first 55 * gives access to PCMCIA card specific resources, and the second gives 56 * access to the microcontroller interface 57 */ 58 #define TS102_REG_CARD_A_INT 0x0000 /* Card A Interrupt Register */ 59 #define TS102_REG_CARD_A_STS 0x0004 /* Card A Status Register */ 60 #define TS102_REG_CARD_A_CTL 0x0008 /* Card A Control Register */ 61 #define TS102_REG_CARD_B_INT 0x0010 /* Card B Interrupt Register */ 62 #define TS102_REG_CARD_B_STS 0x0014 /* Card B Status Register */ 63 #define TS102_REG_CARD_B_CTL 0x0018 /* Card B Control Register */ 64 #define TS102_REG_UCTRL_INT 0x0020 /* Microcontroller Interrupt Register */ 65 #define TS102_REG_UCTRL_DATA 0x0024 /* Microcontroller Data Register */ 66 #define TS102_REG_UCTRL_STS 0x0028 /* Microcontroller Status Register */ 67 68 /* TS102 Card Interrupt Register defintions. 69 * 70 * There is one 16-bit interrupt register for each card. Each register 71 * contains interrupt status (read) and clear (write) bits and an 72 * interrupt mask for each of the four interrupt sources. 73 * 74 * The request bit is the logical AND of the status and the mask bit, 75 * and indicated and an interrupt is being requested. The mask bits 76 * allow masking of individual interrupts. An interrupt is enabled when 77 * the mask is set to 1 and is clear by write a 1 to the associated 78 * request bit. 79 * 80 * The card interrupt register also contain the soft reset flag. 81 * Setting this bit to 1 will the SPARCbook 3 to be reset. 82 */ 83 #define TS102_CARD_INT_RQST_IRQ 0x0001 84 #define TS102_CARD_INT_RQST_WP_STATUS_CHANGED 0x0002 85 #define TS102_CARD_INT_RQST_BATTERY_STATUS_CHANGED 0x0004 86 #define TS102_CARD_INT_RQST_CARDDETECT_STATUS_CHANGED 0x0008 87 #define TS102_CARD_INT_STATUS_IRQ 0x0010 88 #define TS102_CARD_INT_STATUS_WP_STATUS_CHANGED 0x0020 89 #define TS102_CARD_INT_STATUS_BATTERY_STATUS_CHANGED 0x0040 90 #define TS102_CARD_INT_STATUS_CARDDETECT_STATUS_CHANGED 0x0080 91 #define TS102_CARD_INT_MASK_IRQ 0x0100 92 #define TS102_CARD_INT_MASK_WP_STATUS 0x0200 93 #define TS102_CARD_INT_MASK_BATTERY_STATUS 0x0400 94 #define TS102_CARD_INT_MASK_CARDDETECT_STATUS 0x0800 95 #define TS102_CARD_INT_SOFT_RESET 0x1000 96 97 /* TS102 Card Status Register definitions. The Card Status Register 98 * contains card status and control bit. 99 */ 100 #define TS102_CARD_STS_PRES 0x0001 /* Card Present (1) */ 101 #define TS102_CARD_STS_IO 0x0002 /* (1) I/O Card, (0) = Mem Card */ 102 #define TS102_CARD_STS_TYPE3 0x0004 /* Type-3 PCMCIA card (disk) */ 103 #define TS102_CARD_STS_VCC 0x0008 /* Vcc (0=5V, 1=3.3V) */ 104 #define TS102_CARD_STS_VPP1_MASK 0x0030 /* Programming Voltage Control2 */ 105 #define TS102_CARD_STS_VPP1_NC 0x0030 /* NC */ 106 #define TS102_CARD_STS_VPP1_VCC 0x0020 /* Vcc (3.3V or 5V) */ 107 #define TS102_CARD_STS_VPP1_VPP 0x0010 /* Vpp (12V) */ 108 #define TS102_CARD_STS_VPP1_0V 0x0000 /* 0V */ 109 #define TS102_CARD_STS_VPP2_MASK 0x00c0 /* Programming Voltage Control1 */ 110 #define TS102_CARD_STS_VPP2_NC 0x00c0 /* NC */ 111 #define TS102_CARD_STS_VPP2_VCC 0x0080 /* Vcc (3.3V or 5V) */ 112 #define TS102_CARD_STS_VPP2_VPP 0x0040 /* Vpp (12V) */ 113 #define TS102_CARD_STS_VPP2_0V 0x0000 /* 0V */ 114 #define TS102_CARD_STS_WP 0x0100 /* Write Protect (1) */ 115 #define TS102_CARD_STS_BVD_MASK 0x0600 /* Battery Voltage Detect */ 116 #define TS102_CARD_STS_BVD_GOOD 0x0600 /* Battery good */ 117 #define TS102_CARD_STS_BVD_LOW_OK 0x0400 /* Battery low, data OK */ 118 #define TS102_CARD_STS_BVD_LOW_SUSPECT1 0x0200 /* Battery low, data suspect */ 119 #define TS102_CARD_STS_BVD_LOW_SUSPECT0 0x0000 /* Battery low, data suspect */ 120 #define TS102_CARD_STS_LVL 0x0800 /* Level (1) / Edge */ 121 #define TS102_CARD_STS_RDY 0x1000 /* Ready (1) / Not Busy */ 122 #define TS102_CARD_STS_VCCEN 0x2000 /* Powered Up (0) */ 123 #define TS102_CARD_STS_RIEN 0x4000 /* Not Supported */ 124 #define TS102_CARD_STS_ACEN 0x8000 /* Access Enabled (1) */ 125 126 /* TS102 Card Control Register definitions 127 */ 128 #define TS102_CARD_CTL_AA_MASK 0x0003 /* Attribute Address A[25:24] */ 129 #define TS102_CARD_CTL_IA_MASK 0x000c /* I/O Address A[25:24] */ 130 #define TS102_CARD_CTL_IA_BITPOS 2 /* */ 131 #define TS102_CARD_CTL_CES_MASK 0x0070 /* CE/address setup time */ 132 #define TS102_CARD_CTL_CES_BITPOS 4 /* n+1 clocks */ 133 #define TS102_CARD_CTL_OWE_MASK 0x0380 /* OE/WE width */ 134 #define TS102_CARD_CTL_OWE_BITPOS 7 /* n+2 clocks */ 135 #define TS102_CARD_CTL_CEH 0x0400 /* Chip enable hold time */ 136 /* (0) - 1 clock */ 137 /* (1) - 2 clocks */ 138 #define TS102_CARD_CTL_SBLE 0x0800 /* SBus little endian */ 139 #define TS102_CARD_CTL_PCMBE 0x1000 /* PCMCIA big endian */ 140 #define TS102_CARD_CTL_RAHD 0x2000 /* Read ahead enable */ 141 #define TS102_CARD_CTL_INCDIS 0x4000 /* Address increment disable */ 142 #define TS102_CARD_CTL_PWRD 0x8000 /* Power down */ 143 144 /* Microcontroller Interrupt Register 145 */ 146 #define TS102_UCTRL_INT_TXE_REQ 0x01 /* transmit FIFO empty */ 147 #define TS102_UCTRL_INT_TXNF_REQ 0x02 /* transmit FIFO not full */ 148 #define TS102_UCTRL_INT_RXNE_REQ 0x04 /* receive FIFO not empty */ 149 #define TS102_UCTRL_INT_RXO_REQ 0x08 /* receive FIFO overflow */ 150 #define TS102_UCTRL_INT_TXE_MSK 0x10 /* transmit FIFO empty */ 151 #define TS102_UCTRL_INT_TXNF_MSK 0x20 /* transmit FIFO not full */ 152 #define TS102_UCTRL_INT_RXNE_MSK 0x40 /* receive FIFO not empty */ 153 #define TS102_UCTRL_INT_RXO_MSK 0x80 /* receive FIFO overflow */ 154 155 /* TS102 Microcontroller Data Register (only 8 bits are significant). 156 */ 157 #define TS102_UCTRL_DATA_MASK 0xff 158 159 /* TS102 Microcontroller Status Register. 160 * read 1 if asserted 161 * write 1 to clear 162 */ 163 #define TS102_UCTRL_STS_TXE_STA 0x01 /* transmit FIFO empty */ 164 #define TS102_UCTRL_STS_TXNF_STA 0x02 /* transmit FIFO not full */ 165 #define TS102_UCTRL_STS_RXNE_STA 0x04 /* receive FIFO not empty */ 166 #define TS102_UCTRL_STS_RXO_STA 0x08 /* receive FIFO overflow */ 167 #define TS102_UCTRL_STS_MASK 0x0F /* Only 4 bits significant */ 168 169 enum ts102_opcode { /* Argument Returned */ 170 TS102_OP_RD_SERIAL_NUM=0x01, /* none ack + 4 bytes */ 171 TS102_OP_RD_ETHER_ADDR=0x02, /* none ack + 6 bytes */ 172 TS102_OP_RD_HW_VERSION=0x03, /* none ack + 2 bytes */ 173 TS102_OP_RD_UCTLR_VERSION=0x04, /* none ack + 2 bytes */ 174 TS102_OP_RD_MAX_TEMP=0x05, /* none ack + 1 bytes */ 175 TS102_OP_RD_MIN_TEMP=0x06, /* none ack + 1 bytes */ 176 TS102_OP_RD_CURRENT_TEMP=0x07, /* none ack + 1 bytes */ 177 TS102_OP_RD_SYSTEM_VARIANT=0x08, /* none ack + 4 bytes */ 178 TS102_OP_RD_POWERON_CYCLES=0x09, /* none ack + 4 bytes */ 179 TS102_OP_RD_POWERON_SECONDS=0x0a, /* none ack + 4 bytes */ 180 TS102_OP_RD_RESET_STATUS=0x0b, /* none ack + 1 bytes */ 181 #define TS102_RESET_STATUS_RESERVED0 0x00 182 #define TS102_RESET_STATUS_POWERON 0x01 183 #define TS102_RESET_STATUS_KEYBOARD 0x02 184 #define TS102_RESET_STATUS_WATCHDOG 0x03 185 #define TS102_RESET_STATUS_TIMEOUT 0x04 186 #define TS102_RESET_STATUS_SOFTWARE 0x05 187 #define TS102_RESET_STATUS_BROWNOUT 0x06 188 #define TS102_RESET_STATUS_RESERVED1 0x07 189 TS102_OP_RD_EVENT_STATUS=0x0c, /* none ack + 2 bytes */ 190 #define TS102_EVENT_STATUS_SHUTDOWN_REQUEST 0x0001 191 #define TS102_EVENT_STATUS_LOW_POWER_WARNING 0x0002 192 /* Internal Warning Changed 0x0002 */ 193 #define TS102_EVENT_STATUS_VERY_LOW_POWER_WARNING 0x0004 194 /* Discharge Event 0x0004 */ 195 #define TS102_EVENT_STATUS_BATT_CHANGED 0x0008 196 /* Internal Status Changed 0x0008 */ 197 #define TS102_EVENT_STATUS_EXT_KEYBOARD_STATUS_CHANGE 0x0010 198 #define TS102_EVENT_STATUS_EXT_MOUSE_STATUS_CHANGE 0x0020 199 #define TS102_EVENT_STATUS_EXTERNAL_VGA_STATUS_CHANGE 0x0040 200 #define TS102_EVENT_STATUS_LID_STATUS_CHANGE 0x0080 201 #define TS102_EVENT_STATUS_MICROCONTROLLER_ERROR 0x0100 202 #define TS102_EVENT_STATUS_RESERVED 0x0200 203 /* Wakeup 0x0200 */ 204 #define TS102_EVENT_STATUS_EXT_BATT_STATUS_CHANGE 0x0400 205 #define TS102_EVENT_STATUS_EXT_BATT_CHARGING_STATUS_CHANGE 0x0800 206 #define TS102_EVENT_STATUS_EXT_BATT_LOW_POWER 0x1000 207 #define TS102_EVENT_STATUS_DC_STATUS_CHANGE 0x2000 208 #define TS102_EVENT_STATUS_CHARGING_STATUS_CHANGE 0x4000 209 #define TS102_EVENT_STATUS_POWERON_BTN_PRESSED 0x8000 210 TS102_OP_RD_REAL_TIME_CLK=0x0d, /* none ack + 7 bytes */ 211 TS102_OP_RD_EXT_VGA_PORT=0x0e, /* none ack + 1 bytes */ 212 TS102_OP_RD_UCTRL_ROM_CKSUM=0x0f, /* none ack + 2 bytes */ 213 TS102_OP_RD_ERROR_STATUS=0x10, /* none ack + 2 bytes */ 214 #define TS102_ERROR_STATUS_NO_ERROR 0x00 215 #define TS102_ERROR_STATUS_COMMAND_ERROR 0x01 216 #define TS102_ERROR_STATUS_EXECUTION_ERROR 0x02 217 #define TS102_ERROR_STATUS_PHYSICAL_ERROR 0x04 218 TS102_OP_RD_EXT_STATUS=0x11, /* none ack + 2 bytes */ 219 #define TS102_EXT_STATUS_MAIN_POWER_AVAILABLE 0x0001 220 #define TS102_EXT_STATUS_INTERNAL_BATTERY_ATTACHED 0x0002 221 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_ATTACHED 0x0004 222 #define TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED 0x0008 223 #define TS102_EXT_STATUS_EXTERNAL_KEYBOARD_ATTACHED 0x0010 224 #define TS102_EXT_STATUS_EXTERNAL_MOUSE_ATTACHED 0x0020 225 #define TS102_EXT_STATUS_LID_DOWN 0x0040 226 #define TS102_EXT_STATUS_INTERNAL_BATTERY_CHARGING 0x0080 227 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_CHARGING 0x0100 228 #define TS102_EXT_STATUS_INTERNAL_BATTERY_DISCHARGING 0x0200 229 #define TS102_EXT_STATUS_EXTERNAL_BATTERY_DISCHARGING 0x0400 230 TS102_OP_RD_USER_CONFIG=0x12, /* none ack + 2 bytes */ 231 TS102_OP_RD_UCTRL_VLT=0x13, /* none ack + 1 bytes */ 232 TS102_OP_RD_INT_BATT_VLT=0x14, /* none ack + 1 bytes */ 233 TS102_OP_RD_DC_IN_VLT=0x15, /* none ack + 1 bytes */ 234 TS102_OP_RD_HORZ_PRT_VLT=0x16, /* none ack + 1 bytes */ 235 TS102_OP_RD_VERT_PTR_VLT=0x17, /* none ack + 1 bytes */ 236 TS102_OP_RD_INT_CHARGE_RATE=0x18, /* none ack + 1 bytes */ 237 TS102_OP_RD_EXT_CHARGE_RATE=0x19, /* none ack + 1 bytes */ 238 TS102_OP_RD_RTC_ALARM=0x1a, /* none ack + 7 bytes */ 239 TS102_OP_RD_EVENT_STATUS_NO_RESET=0x1b, /* none ack + 2 bytes */ 240 TS102_OP_RD_INT_KBD_LAYOUT=0x1c, /* none ack + 2 bytes */ 241 TS102_OP_RD_EXT_KBD_LAYOUT=0x1d, /* none ack + 2 bytes */ 242 TS102_OP_RD_EEPROM_STATUS=0x1e, /* none ack + 2 bytes */ 243 #define TS102_EEPROM_STATUS_FACTORY_AREA_CHECKSUM_FAIL 0x01 244 #define TS102_EEPROM_STATUS_CONSUMER_AREA_CHECKSUM_FAIL 0x02 245 #define TS102_EEPROM_STATUS_USER_AREA_CHECKSUM_FAIL 0x04 246 #define TS102_EEPROM_STATUS_VPD_AREA_CHECKSUM_FAIL 0x08 247 248 /* Read/Write/Modify Commands 249 */ 250 TS102_OP_CTL_LCD=0x20, /* 4 byte mask ack + 4 bytes */ 251 #define TS102_LCD_CAPS_LOCK 0x0001 252 #define TS102_LCD_SCROLL_LOCK 0x0002 253 #define TS102_LCD_NUMLOCK 0x0004 254 #define TS102_LCD_DISK_ACTIVE 0x0008 255 #define TS102_LCD_LAN_ACTIVE 0x0010 256 #define TS102_LCD_WAN_ACTIVE 0x0020 257 #define TS102_LCD_PCMCIA_ACTIVE 0x0040 258 #define TS102_LCD_DC_OK 0x0080 259 #define TS102_LCD_COMPOSE 0x0100 260 TS102_OP_CTL_BITPORT=0x21, /* mask ack + 1 byte */ 261 #define TS102_BITPORT_TFTPWR 0x01 /* TFT power (low) */ 262 #define TS102_BITPORT_SYNCINVA 0x04 /* ext. monitor sync (low) */ 263 #define TS102_BITPORT_SYNCINVB 0x08 /* ext. monitor sync (low) */ 264 #define TS102_BITPORT_BP_DIS 0x10 /* no bootprom from pcmcia (high) */ 265 /* boot from pcmcia (low */ 266 #define TS102_BITPORT_ENCSYNC 0x20 /* enab composite sync (low) */ 267 TS102_OP_CTL_DEV=0x22, /* mask ack + 1 byte */ 268 #define TS102_DEVCTL_CHARGE_DISABLE 0x01 /* dis/en charging */ 269 #define TS102_DEVCTL_POINTER_DISABLE 0x04 /* dis/en pointer */ 270 #define TS102_DEVCTL_KEYCLICK 0x08 /* keyclick? */ 271 #define TS102_DEVCTL_INT_BTNCLICK 0x10 /* internal button click? */ 272 #define TS102_DEVCTL_EXT_BTNCLICK 0x20 /* ext. button click?? */ 273 TS102_OP_CTL_SPEAKER_VOLUME=0x23, /* mask ack + 1 byte */ 274 TS102_OP_CTL_TFT_BIRGHNESS=0x24, /* mask ack + 1 byte */ 275 TS102_OP_CTL_WATCHDOG=0x25, /* mask ack + 1 byte */ 276 TS102_OP_CTL_FCTRY_EEPROM=0x26, /* mask ack + 1 byte */ 277 TS102_OP_CTL_SECURITY_KEY=0x27, /* no idea */ 278 TS102_OP_CTL_KDB_TIME_UNTL_RTP=0x28, /* mask ack + 1 byte */ 279 TS102_OP_CTL_KBD_TIME_BTWN_RPTS=0x29, /* mask ack + 1 byte */ 280 TS102_OP_CTL_TIMEZONE=0x2a, /* mask ack + 1 byte */ 281 TS102_OP_CTL_MARK_SPACE_RATIO=0x2b, /* mask ack + 1 byte */ 282 TS102_OP_CTL_MOUSE_SENS=0x2c, /* mask ack + 1 byte */ 283 TS102_OP_CTL_MOUSE_SCAN=0x2d, /* no idea invalid?*/ 284 TS102_OP_CTL_DIAGNOSTIC_MODE=0x2e, /* mask ack + 1 byte */ 285 #define TS102_DIAGNOSTIC_MODE_CMD_DIAG_ON_LCD 0x01 286 #define TS102_DIAGNOSTIC_MODE_KDB_MS_9600 0x02 287 TS102_OP_CTL_SCREEN_CONTRAST=0x2f, /* mask ack + 1 byte */ 288 289 /* Commands returning no status 290 */ 291 TS102_OP_CMD_RING_BELL=0x30, /* msb,lsb ack */ 292 TS102_OP_RD_INPUT_SOURCE=0x31, /* no idea */ 293 TS102_OP_CMD_DIAGNOSTIC_STATUS=0x32, /* msb,lsb ack */ 294 TS102_OP_CMD_CLR_KEY_COMBO_TBL=0x33, /* none ack */ 295 TS102_OP_CMD_SOFTWARE_RESET=0x34, /* none ack */ 296 TS102_OP_CMD_SET_RTC=0x35, /* smhddmy ack */ 297 TS102_OP_CMD_RECAL_PTR=0x36, /* none ack */ 298 TS102_OP_CMD_SET_BELL_FREQ=0x37, /* msb,lsb ack */ 299 TS102_OP_CMD_SET_INT_BATT_RATE=0x39, /* charge-lvl ack */ 300 TS102_OP_CMD_SET_EXT_BATT_RATE=0x3a, /* charge-lvl ack */ 301 TS102_OP_CMD_SET_RTC_ALARM=0x3b, /* smhddmy ack */ 302 303 /* Block transfer commands 304 */ 305 TS102_OP_BLK_RD_EEPROM=0x40, /* len off ack <data> */ 306 TS102_OP_BLK_WR_EEPROM=0x41, /* len off <data> ack */ 307 TS102_OP_BLK_WR_STATUS=0x42, /* len off <data> ack */ 308 TS102_OP_BLK_DEF_SPCL_CHAR=0x43, /* len off <8b data> ack */ 309 #define TS102_BLK_OFF_DEF_WAN1 0 310 #define TS102_BLK_OFF_DEF_WAN2 1 311 #define TS102_BLK_OFF_DEF_LAN1 2 312 #define TS102_BLK_OFF_DEF_LAN2 3 313 #define TS102_BLK_OFF_DEF_PCMCIA 4 314 #define TS102_BLK_OFF_DEF_DC_GOOD 5 315 #define TS102_BLK_OFF_DEF_BACKSLASH 6 316 317 /* Generic commands 318 */ 319 TS102_OP_GEN_DEF_KEY_COMBO_ENT=0x50, /* seq com-length ack */ 320 TS102_OP_GEN_DEF_STRING_TBL_ENT=0x51, /* str-code len <str> ack */ 321 TS102_OP_GEN_DEF_STS_CTRN_DISP=0x52, /* len <msg> ack */ 322 323 /* Generic commands with optional status 324 */ 325 TS102_OP_GEN_STS_EMU_COMMAND=0x64, /* <command> ack */ 326 TS102_OP_GEN_STS_RD_EMU_REGISTER=0x65, /* reg ack + 1 byte */ 327 TS102_OP_GEN_STS_WR_EMU_REGISTER=0x66, /* reg,val ack */ 328 TS102_OP_GEN_STS_RD_EMU_RAM=0x67, /* addr ack + 1 byte */ 329 TS102_OP_GEN_STS_WR_EMU_RAM=0x68, /* addr,val ack */ 330 TS102_OP_GEN_STS_RD_BQ_REGISTER=0x69, /* reg ack + 1 byte */ 331 TS102_OP_GEN_STS_WR_BQ_REGISTER=0x6a, /* reg,val ack */ 332 333 /* Administration commands 334 */ 335 TS102_OP_ADMIN_SET_USER_PASS=0x70, /* len <pass> ack */ 336 TS102_OP_ADMIN_VRFY_USER_PASS=0x71, /* len <pass> ack + status */ 337 TS102_OP_ADMIN_GET_SYSTEM_PASS=0x72, /* none ack + <7bytekey> */ 338 TS102_OP_ADMIN_VRFY_SYSTEM_PASS=0x73, /* len <pass> ack + status */ 339 TS102_OP_RD_INT_CHARGE_LEVEL=0x7a, /* ack + 2 byte */ 340 TS102_OP_RD_EXT_CHARGE_LEVEL=0x7b, /* ack + 2 byte */ 341 TS102_OP_SLEEP=0x80, /* supposedly sleeps, not sure */ 342 TS102_OP_ADMIN_POWER_OFF=0x82, /* len <pass> none */ 343 TS102_OP_ADMIN_POWER_RESTART=0x83, /* msb,xx,lsb none */ 344 }; 345 346 #endif /* _SPARC_DEV_TS102REG_H */ 347