1 /* $NetBSD: fpu_div.c,v 1.2 1994/11/20 20:52:38 deraadt Exp $ */ 2 3 /* 4 * Copyright (c) 1992, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This software was developed by the Computer Systems Engineering group 8 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and 9 * contributed to Berkeley. 10 * 11 * All advertising materials mentioning features or use of this software 12 * must display the following acknowledgement: 13 * This product includes software developed by the University of 14 * California, Lawrence Berkeley Laboratory. 15 * 16 * Redistribution and use in source and binary forms, with or without 17 * modification, are permitted provided that the following conditions 18 * are met: 19 * 1. Redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer. 21 * 2. Redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution. 24 * 3. All advertising materials mentioning features or use of this software 25 * must display the following acknowledgement: 26 * This product includes software developed by the University of 27 * California, Berkeley and its contributors. 28 * 4. Neither the name of the University nor the names of its contributors 29 * may be used to endorse or promote products derived from this software 30 * without specific prior written permission. 31 * 32 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 33 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 34 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 35 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 36 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 40 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 41 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 42 * SUCH DAMAGE. 43 * 44 * @(#)fpu_div.c 8.1 (Berkeley) 6/11/93 45 */ 46 47 /* 48 * Perform an FPU divide (return x / y). 49 */ 50 51 #include <sys/types.h> 52 53 #include <machine/reg.h> 54 55 #include <sparc/fpu/fpu_arith.h> 56 #include <sparc/fpu/fpu_emu.h> 57 58 /* 59 * Division of normal numbers is done as follows: 60 * 61 * x and y are floating point numbers, i.e., in the form 1.bbbb * 2^e. 62 * If X and Y are the mantissas (1.bbbb's), the quotient is then: 63 * 64 * q = (X / Y) * 2^((x exponent) - (y exponent)) 65 * 66 * Since X and Y are both in [1.0,2.0), the quotient's mantissa (X / Y) 67 * will be in [0.5,2.0). Moreover, it will be less than 1.0 if and only 68 * if X < Y. In that case, it will have to be shifted left one bit to 69 * become a normal number, and the exponent decremented. Thus, the 70 * desired exponent is: 71 * 72 * left_shift = x->fp_mant < y->fp_mant; 73 * result_exp = x->fp_exp - y->fp_exp - left_shift; 74 * 75 * The quotient mantissa X/Y can then be computed one bit at a time 76 * using the following algorithm: 77 * 78 * Q = 0; -- Initial quotient. 79 * R = X; -- Initial remainder, 80 * if (left_shift) -- but fixed up in advance. 81 * R *= 2; 82 * for (bit = FP_NMANT; --bit >= 0; R *= 2) { 83 * if (R >= Y) { 84 * Q |= 1 << bit; 85 * R -= Y; 86 * } 87 * } 88 * 89 * The subtraction R -= Y always removes the uppermost bit from R (and 90 * can sometimes remove additional lower-order 1 bits); this proof is 91 * left to the reader. 92 * 93 * This loop correctly calculates the guard and round bits since they are 94 * included in the expanded internal representation. The sticky bit 95 * is to be set if and only if any other bits beyond guard and round 96 * would be set. From the above it is obvious that this is true if and 97 * only if the remainder R is nonzero when the loop terminates. 98 * 99 * Examining the loop above, we can see that the quotient Q is built 100 * one bit at a time ``from the top down''. This means that we can 101 * dispense with the multi-word arithmetic and just build it one word 102 * at a time, writing each result word when it is done. 103 * 104 * Furthermore, since X and Y are both in [1.0,2.0), we know that, 105 * initially, R >= Y. (Recall that, if X < Y, R is set to X * 2 and 106 * is therefore at in [2.0,4.0).) Thus Q is sure to have bit FP_NMANT-1 107 * set, and R can be set initially to either X - Y (when X >= Y) or 108 * 2X - Y (when X < Y). In addition, comparing R and Y is difficult, 109 * so we will simply calculate R - Y and see if that underflows. 110 * This leads to the following revised version of the algorithm: 111 * 112 * R = X; 113 * bit = FP_1; 114 * D = R - Y; 115 * if (D >= 0) { 116 * result_exp = x->fp_exp - y->fp_exp; 117 * R = D; 118 * q = bit; 119 * bit >>= 1; 120 * } else { 121 * result_exp = x->fp_exp - y->fp_exp - 1; 122 * q = 0; 123 * } 124 * R <<= 1; 125 * do { 126 * D = R - Y; 127 * if (D >= 0) { 128 * q |= bit; 129 * R = D; 130 * } 131 * R <<= 1; 132 * } while ((bit >>= 1) != 0); 133 * Q[0] = q; 134 * for (i = 1; i < 4; i++) { 135 * q = 0, bit = 1 << 31; 136 * do { 137 * D = R - Y; 138 * if (D >= 0) { 139 * q |= bit; 140 * R = D; 141 * } 142 * R <<= 1; 143 * } while ((bit >>= 1) != 0); 144 * Q[i] = q; 145 * } 146 * 147 * This can be refined just a bit further by moving the `R <<= 1' 148 * calculations to the front of the do-loops and eliding the first one. 149 * The process can be terminated immediately whenever R becomes 0, but 150 * this is relatively rare, and we do not bother. 151 */ 152 153 struct fpn * 154 fpu_div(fe) 155 register struct fpemu *fe; 156 { 157 register struct fpn *x = &fe->fe_f1, *y = &fe->fe_f2; 158 register u_int q, bit; 159 register u_int r0, r1, r2, r3, d0, d1, d2, d3, y0, y1, y2, y3; 160 FPU_DECL_CARRY 161 162 /* 163 * Since divide is not commutative, we cannot just use ORDER. 164 * Check either operand for NaN first; if there is at least one, 165 * order the signalling one (if only one) onto the right, then 166 * return it. Otherwise we have the following cases: 167 * 168 * Inf / Inf = NaN, plus NV exception 169 * Inf / num = Inf [i.e., return x] 170 * Inf / 0 = Inf [i.e., return x] 171 * 0 / Inf = 0 [i.e., return x] 172 * 0 / num = 0 [i.e., return x] 173 * 0 / 0 = NaN, plus NV exception 174 * num / Inf = 0 175 * num / num = num (do the divide) 176 * num / 0 = Inf, plus DZ exception 177 */ 178 if (ISNAN(x) || ISNAN(y)) { 179 ORDER(x, y); 180 return (y); 181 } 182 if (ISINF(x) || ISZERO(x)) { 183 if (x->fp_class == y->fp_class) 184 return (fpu_newnan(fe)); 185 return (x); 186 } 187 188 /* all results at this point use XOR of operand signs */ 189 x->fp_sign ^= y->fp_sign; 190 if (ISINF(y)) { 191 x->fp_class = FPC_ZERO; 192 return (x); 193 } 194 if (ISZERO(y)) { 195 fe->fe_cx = FSR_DZ; 196 x->fp_class = FPC_INF; 197 return (x); 198 } 199 200 /* 201 * Macros for the divide. See comments at top for algorithm. 202 * Note that we expand R, D, and Y here. 203 */ 204 205 #define SUBTRACT /* D = R - Y */ \ 206 FPU_SUBS(d3, r3, y3); FPU_SUBCS(d2, r2, y2); \ 207 FPU_SUBCS(d1, r1, y1); FPU_SUBC(d0, r0, y0) 208 209 #define NONNEGATIVE /* D >= 0 */ \ 210 ((int)d0 >= 0) 211 212 #ifdef FPU_SHL1_BY_ADD 213 #define SHL1 /* R <<= 1 */ \ 214 FPU_ADDS(r3, r3, r3); FPU_ADDCS(r2, r2, r2); \ 215 FPU_ADDCS(r1, r1, r1); FPU_ADDC(r0, r0, r0) 216 #else 217 #define SHL1 \ 218 r0 = (r0 << 1) | (r1 >> 31), r1 = (r1 << 1) | (r2 >> 31), \ 219 r2 = (r2 << 1) | (r3 >> 31), r3 <<= 1 220 #endif 221 222 #define LOOP /* do ... while (bit >>= 1) */ \ 223 do { \ 224 SHL1; \ 225 SUBTRACT; \ 226 if (NONNEGATIVE) { \ 227 q |= bit; \ 228 r0 = d0, r1 = d1, r2 = d2, r3 = d3; \ 229 } \ 230 } while ((bit >>= 1) != 0) 231 232 #define WORD(r, i) /* calculate r->fp_mant[i] */ \ 233 q = 0; \ 234 bit = 1 << 31; \ 235 LOOP; \ 236 (x)->fp_mant[i] = q 237 238 /* Setup. Note that we put our result in x. */ 239 r0 = x->fp_mant[0]; 240 r1 = x->fp_mant[1]; 241 r2 = x->fp_mant[2]; 242 r3 = x->fp_mant[3]; 243 y0 = y->fp_mant[0]; 244 y1 = y->fp_mant[1]; 245 y2 = y->fp_mant[2]; 246 y3 = y->fp_mant[3]; 247 248 bit = FP_1; 249 SUBTRACT; 250 if (NONNEGATIVE) { 251 x->fp_exp -= y->fp_exp; 252 r0 = d0, r1 = d1, r2 = d2, r3 = d3; 253 q = bit; 254 bit >>= 1; 255 } else { 256 x->fp_exp -= y->fp_exp + 1; 257 q = 0; 258 } 259 LOOP; 260 x->fp_mant[0] = q; 261 WORD(x, 1); 262 WORD(x, 2); 263 WORD(x, 3); 264 x->fp_sticky = r0 | r1 | r2 | r3; 265 266 return (x); 267 } 268