xref: /netbsd/sys/arch/sun3/conf/INSTALL (revision bf9ec67e)
1# $NetBSD: INSTALL,v 1.17 2002/04/25 15:06:39 atatat Exp $
2#
3# INSTALL - Installation kernel for the Sun3
4#
5# This kernel is derived from GENERIC with some features commented out.
6#
7# This kernel does NOT support X, mice, non-NetBSD emulation, etc.
8#
9
10include "arch/sun3/conf/std.sun3"
11
12#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
13
14makeoptions	COPTS="-Os"	# Optimise for space. Implies -O2
15
16# Machines to be supported by this kernel
17options 	FPU_EMULATE
18options 	HAVECACHE	# Sun3/260 VAC
19
20# Needs to be set per system.  i.e change these as you see fit
21maxusers	2
22
23# Standard system options
24#options 	KTRACE		# system call tracing
25#options 	SYSVMSG		# System V message queues
26#options 	SYSVSEM		# System V semaphores
27#options 	SYSVSHM		# System V shared memory
28#options 	SHMMAXPGS=1024	# 1024 pages is the default
29#options 	LKM		# loadable kernel modules
30#options 	INSECURE	# disable kernel security level
31#options 	UCONSOLE	# Allow non-root TIOCCONS
32#options 	USERCONF	# userconf(4) support
33options		PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
34
35# Which kernel debugger?  Uncomment either this:
36#options 	DDB
37# ... or these for KGDB (gdb remote target)
38#makeoptions	DEBUG="-g"	# debugging symbols for gdb
39#options 	KGDB
40#options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
41
42# Other debugging options
43#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
44#options 	DEBUG		# kernel debugging code
45#options 	DIAGNOSTIC	# extra kernel sanity checking
46#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
47#options 	PMAP_DEBUG
48#options 	SCSIDEBUG
49#options 	SCSIVERBOSE		# Verbose SCSI errors
50
51# Compatibility options
52#options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
53#options 	COMPAT_43	# and 4.3BSD and ...
54#options 	COMPAT_10	# NetBSD 1.0
55#options 	COMPAT_11	# NetBSD 1.1
56#options 	COMPAT_12	# NetBSD 1.2
57options 	COMPAT_13	# NetBSD 1.3
58options 	COMPAT_14	# NetBSD 1.4
59#options 	COMPAT_LINUX	# can run Linux/m68k executables
60#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
61
62# File systems
63file-system	FFS		# Berkeley Fast Filesystem
64file-system	NFS		# Sun NFS client support
65file-system	CD9660		# ISO 9660 + Rock Ridge file system
66#file-system	FDESC		# /dev/fd/*
67file-system	KERNFS		# /kern
68#file-system	NULLFS		# loopback file system
69#file-system	PROCFS		# /proc
70#file-system	UNION		# union file system
71#file-system	MFS		# memory-based filesystem
72
73# Filesystem options
74#options 	NFSSERVER	# nfs server support
75#options 	QUOTA		# FFS quotas
76#options 	FFS_EI		# FFS Endian Independant support
77#options 	NFS_V2_ONLY	# Exclude NFS3 and NQNFS code to save space
78#options 	VNODE_OP_NOINLINE # Save space by not inlining vnode op calls
79
80# Networking options
81options 	INET		# IP prototol stack support
82#options 	GATEWAY		# IP packet forwarding
83#options 	ISO,TPIP	# OSI networking
84#options 	EON		# OSI tunneling over IP
85#options 	CCITT,LLC,HDLC	# X.25
86#options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
87#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
88
89# Work-around for root on slow servers (insurance...)
90options 	NFS_BOOT_RWSIZE=1024
91options 	NFS_BOOT_BOOTPARAM
92
93config		netbsd root on ? type ?
94
95# On-board I/O space (required)
96include "arch/sun3/conf/obio.sun3"
97
98# On-board memory (optional)
99# See frame-buffers
100# obmem0 at mainbus?
101
102# VME bus support (optional)
103# One unit for each address space
104vme0 at mainbus? # A16/D16
105vme1 at mainbus? # A16/D32
106vme2 at mainbus? # A24/D16
107vme3 at mainbus? # A24/D32
108vme4 at mainbus? # A32/D16
109vme5 at mainbus? # A32/D32
110
111#
112# Serial ports
113#
114zstty0	at zsc1 channel 0	# ttya
115zstty1	at zsc1 channel 1	# ttyb
116
117kbd0	at zsc0 channel 0	# keyboard
118#ms0	at zsc0 channel 1	# mouse
119
120#
121# Network devices
122#
123
124# Intel Ethernet (onboard, or VME)
125ie0 at obio0 addr 0x0C0000 ipl 3
126ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
127
128# Lance Ethernet (only onboard)
129le0 at obio0 addr 0x120000 ipl 3
130
131# All Sun3 machines with an "le" (3/50, 3/60) should be
132# presumed to have the old, buggy LANCE chip. (Rev. C)
133options 	LANCE_REVC_BUG
134
135#
136# Disk and tape devices
137#
138
139# Sun3 "si" SCSI controller (NCR 5380)
140# See GENERIC for the flags description.
141si0 at obio0 addr 0x140000 ipl 2
142si0 at vme2 addr 0x200000 ipl 2 vect 0x40
143si1 at vme2 addr 0x204000 ipl 2 vect 0x41
144
145# Xylogics 450/451 controllers (VME A16/D16)
146xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
147xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
148xy* at xyc? drive ?
149
150# Xylogics 7053 controllers (VME A16/D32)
151xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
152xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
153xd* at xdc? drive ?
154
155# Xylogics 472 tape controllers?
156
157# Sun3/E SCSI+Ethernet board (VME A24/D16)
158# Note: the board uses vect and vect+1
159sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
160sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
161si* at sebuf?
162ie* at sebuf?
163
164#
165# Frame buffer devices
166# (Not needed for installation kernels.)
167
168#
169# SCSI infrastructure
170#
171scsibus* at scsi?
172
173sd* at scsibus? target ? lun ?		# SCSI disks
174st* at scsibus? target ? lun ?		# SCSI tapes
175cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
176#ch* at scsibus? target ? lun ?		# SCSI changer devices
177#ss* at scsibus? target ? lun ?		# SCSI scanners
178#uk* at scsibus? target ? lun ?		# unknown SCSI devices
179
180# Memory-disk drivers
181#pseudo-device	md		2
182
183# Misc.
184pseudo-device	loop		1	# network loopback
185#pseudo-device	bpfilter	8	# packet filter
186pseudo-device	sl		2	# CSLIP
187pseudo-device	ppp		2	# PPP
188pseudo-device	tun		2	# network tunneling over tty
189#pseudo-device	gre		2	# generic L3 over IP tunnel
190#pseudo-device	ipfilter		# ip filter
191#pseudo-device	rnd			# /dev/random and in-kernel generator
192
193pseudo-device	pty		2	# pseudo-terminals (Sysinst needs two)
194#pseudo-device	vnd		4	# paging to files
195#pseudo-device	ccd		4	# concatenated disks
196