1# $NetBSD: RAMDISK,v 1.35 2002/09/18 02:44:10 lukem Exp $ 2 3# RAMDISK: Root/swap on ramdisk 4# This kernel is used to: 5# format the disk (not yet implemented) 6# partition the disk (disklabel) 7# install the miniroot in the swap partition 8 9include "arch/sun3/conf/std.sun3" 10 11#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 12 13# Machines to be supported by this kernel 14# options FPU_EMULATE # No FP code here! 15options HAVECACHE # Sun3/260 VAC 16 17# Needs to be set per system. i.e change these as you see fit 18maxusers 2 19 20# Standard system options 21# ... debugging options 22#options DDB 23# Compatibility options (none) 24 25# Filesystem options 26# Need FFS for the ramdisk image. 27file-system FFS # Berkeley Fast Filesystem 28# May need these to get miniroot image. 29file-system NFS # Sun NFS client support 30file-system CD9660 # ISO 9660 + Rock Ridge file system 31 32# Networking options 33options INET # IP prototol stack support 34#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 35 36#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 37 38# Enable the hooks used for initializing the root memory-disk. 39options MEMORY_DISK_HOOKS 40options MEMORY_DISK_IS_ROOT # force root on memory disk 41options MEMORY_DISK_SERVER=0 # no userspace memory disk support 42options MEMORY_DISK_ROOT_SIZE=800 # size of memory disk, in blocks 43 44options USERCONF # userconf(4) support 45options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46 47config netbsd root on ? type ffs 48 49# On-board I/O space (required) 50include "arch/sun3/conf/obio.sun3" 51 52# On-board memory (optional) 53# See frame-buffers 54# obmem0 at mainbus? 55 56# VME bus support (optional) 57# One unit for each address space 58vme0 at mainbus? # A16/D16 59vme1 at mainbus? # A16/D32 60vme2 at mainbus? # A24/D16 61vme3 at mainbus? # A24/D32 62vme4 at mainbus? # A32/D16 63vme5 at mainbus? # A32/D32 64 65# 66# Serial ports 67# 68zstty0 at zsc1 channel 0 # ttya 69zstty1 at zsc1 channel 1 # ttyb 70 71kbd0 at zsc0 channel 0 # keyboard 72#ms0 at zsc0 channel 1 # mouse 73 74# 75# Network devices 76# 77 78# Intel Ethernet (onboard, or VME) 79ie0 at obio0 addr 0x0C0000 ipl 3 80ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 81 82# Lance Ethernet (only onboard) 83le0 at obio0 addr 0x120000 ipl 3 84 85# All Sun3 machines with an "le" (3/50, 3/60) should be 86# presumed to have the old, buggy LANCE chip. (Rev. C) 87options LANCE_REVC_BUG 88 89# 90# Disk and tape devices 91# 92 93# Sun3 "si" SCSI controller (NCR 5380) 94# See GENERIC for the flags description. 95si0 at obio0 addr 0x140000 ipl 2 96si0 at vme2 addr 0x200000 ipl 2 vect 0x40 97si1 at vme2 addr 0x204000 ipl 2 vect 0x41 98 99# Xylogics 450/451 controllers (VME A16/D16) 100xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 101xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 102xy* at xyc? drive ? 103 104# Xylogics 7053 controllers (VME A16/D32) 105xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 106xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 107xd* at xdc? drive ? 108 109# Xylogics 472 tape controllers? 110 111# Sun3/E SCSI+Ethernet board (VME A24/D16) 112# Note: the board uses vect and vect+1 113sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 114sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 115si* at sebuf? 116ie* at sebuf? 117 118# 119# Frame buffer devices 120# (Not needed for installation kernels.) 121 122# 123# SCSI infrastructure 124# 125scsibus* at scsi? 126 127sd* at scsibus? target ? lun ? # SCSI disks 128st* at scsibus? target ? lun ? # SCSI tapes 129cd* at scsibus? target ? lun ? # SCSI CD-ROMs 130#ch* at scsibus? target ? lun ? # SCSI changer devices 131#ss* at scsibus? target ? lun ? # SCSI scanners 132#uk* at scsibus? target ? lun ? # unknown SCSI devices 133 134# Memory-disk drivers (root for install tape) 135pseudo-device md 2 136 137# Misc. 138pseudo-device loop 1 # network loopback 139pseudo-device sl 2 # CSLIP 140