xref: /netbsd/sys/dev/ic/hmereg.h (revision 6550d01e)
1 /*	$NetBSD: hmereg.h,v 1.22 2009/05/07 06:46:54 jdc Exp $	*/
2 
3 /*-
4  * Copyright (c) 1999 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Paul Kranenburg.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * HME Shared Ethernet Block register offsets
34  */
35 #define HME_SEBI_RESET	(0*4)
36 #define HME_SEBI_CFG	(1*4)
37 #define HME_SEBI_STAT	(64*4)
38 #define HME_SEBI_IMASK	(65*4)
39 
40 /* HME SEB bits. */
41 #define HME_SEB_RESET_ETX	0x00000001	/* reset external transmitter */
42 #define HME_SEB_RESET_ERX	0x00000002	/* reset external receiver */
43 
44 #define HME_SEB_CFG_BURSTMASK	0x00000003	/* covers all burst bits */
45 #define HME_SEB_CFG_BURST16	0x00000000	/* 16 byte bursts */
46 #define HME_SEB_CFG_BURST32	0x00000001	/* 32 byte bursts */
47 #define HME_SEB_CFG_BURST64	0x00000002	/* 64 byte bursts */
48 #define HME_SEB_CFG_64BIT	0x00000004	/* 64-bit CEI/SBus DVMA (94) */
49 #define HME_SEB_CFG_PARITY	0x00000008	/* DVMA & PIO parity check */
50 #define HME_SEB_CFG_VERS	0xf0000000	/* ether channel version */
51 #define HME_SEB_CFG_VERSSHIFT	28
52 
53 #define HME_SEB_STAT_GOTFRAME	0x00000001	/* frame received */
54 #define HME_SEB_STAT_RCNTEXP	0x00000002	/* rx frame count expired */
55 #define HME_SEB_STAT_ACNTEXP	0x00000004	/* align error count expired */
56 #define HME_SEB_STAT_CCNTEXP	0x00000008	/* crc error count expired */
57 #define HME_SEB_STAT_LCNTEXP	0x00000010	/* length error count expired */
58 #define HME_SEB_STAT_RFIFOVF	0x00000020	/* rx fifo overflow */
59 #define HME_SEB_STAT_CVCNTEXP	0x00000040	/* code violation counter exp */
60 #define HME_SEB_STAT_STSTERR	0x00000080	/* xif sqe test failed */
61 #define HME_SEB_STAT_SENTFRAME	0x00000100	/* frame sent */
62 #define HME_SEB_STAT_TFIFO_UND	0x00000200	/* tx fifo underrun */
63 #define HME_SEB_STAT_MAXPKTERR	0x00000400	/* max-packet size error */
64 #define HME_SEB_STAT_NCNTEXP	0x00000800	/* normal collision count exp */
65 #define HME_SEB_STAT_ECNTEXP	0x00001000	/* excess collision count exp */
66 #define HME_SEB_STAT_LCCNTEXP	0x00002000	/* late collision count exp */
67 #define HME_SEB_STAT_FCNTEXP	0x00004000	/* first collision count exp */
68 #define HME_SEB_STAT_DTIMEXP	0x00008000	/* defer timer expired */
69 #define HME_SEB_STAT_RXTOHOST	0x00010000	/* pkt moved from rx fifo->memory */
70 #define HME_SEB_STAT_NORXD	0x00020000	/* out of receive descriptors */
71 #define HME_SEB_STAT_RXERR	0x00040000	/* rx DMA error */
72 #define HME_SEB_STAT_RXLATERR	0x00080000	/* late error during rx DMA */
73 #define HME_SEB_STAT_RXPERR	0x00100000	/* parity error during rx DMA */
74 #define HME_SEB_STAT_RXTERR	0x00200000	/* tag error during rx DMA */
75 #define HME_SEB_STAT_EOPERR	0x00400000	/* tx descriptor did not set EOP */
76 #define HME_SEB_STAT_MIFIRQ	0x00800000	/* mif needs attention */
77 #define HME_SEB_STAT_HOSTTOTX	0x01000000	/* pkt moved from memory->tx fifo */
78 #define HME_SEB_STAT_TXALL	0x02000000	/* all pkts in fifo transmitted */
79 #define HME_SEB_STAT_TXEACK	0x04000000	/* error during tx DMA */
80 #define HME_SEB_STAT_TXLERR	0x08000000	/* late error during tx DMA */
81 #define HME_SEB_STAT_TXPERR	0x10000000	/* parity error during tx DMA */
82 #define HME_SEB_STAT_TXTERR	0x20000000	/* tag error durig tx DMA */
83 #define HME_SEB_STAT_SLVERR	0x40000000	/* pio access error */
84 #define HME_SEB_STAT_SLVPERR	0x80000000	/* pio access parity error */
85 #define HME_SEB_STAT_BITS	"\177\020"				\
86 			"b\0GOTFRAME\0b\1RCNTEXP\0b\2ACNTEXP\0"		\
87 			"b\3CCNTEXP\0b\4LCNTEXP\0b\5RFIFOVF\0"		\
88 			"b\6CVCNTEXP\0b\7STSTERR\0b\10SENTFRAME\0"	\
89 			"b\11TFIFO_UND\0b\12MAXPKTERR\0b\13NCNTEXP\0"	\
90 			"b\14ECNTEXP\0b\15LCCNTEXP\0b\16FCNTEXP\0"	\
91 			"b\17DTIMEXP\0b\20RXTOHOST\0b\21NORXD\0"	\
92 			"b\22RXERR\0b\23RXLATERR\0b\24RXPERR\0"		\
93 			"b\25RXTERR\0b\26EOPERR\0b\27MIFIRQ\0"		\
94 			"b\30HOSTTOTX\0b\31TXALL\0b\32XTEACK\0"		\
95 			"b\33TXLERR\0b\34TXPERR\0b\35TXTERR\0"		\
96 			"b\36SLVERR\0b\37SLVPERR\0\0"
97 
98 #ifdef HMEDEBUG
99 #define HME_SEB_STAT_DEBUG_ERRORS	(HME_SEB_STAT_DTIMEXP | HME_SEB_STAT_RFIFOVF)
100 #else
101 #define HME_SEB_STAT_DEBUG_ERRORS	0
102 #endif
103 
104 #define HME_SEB_STAT_ALL_ERRORS	\
105 	(HME_SEB_STAT_SLVPERR  | HME_SEB_STAT_SLVERR  | HME_SEB_STAT_TXTERR   |\
106 	 HME_SEB_STAT_TXPERR   | HME_SEB_STAT_TXLERR  | HME_SEB_STAT_TXEACK   |\
107 	 HME_SEB_STAT_EOPERR   | HME_SEB_STAT_RXTERR  | HME_SEB_STAT_RXPERR   |\
108 	 HME_SEB_STAT_RXLATERR | HME_SEB_STAT_RXERR   | HME_SEB_STAT_NORXD    |\
109 	 HME_SEB_STAT_FCNTEXP  | HME_SEB_STAT_LCCNTEXP |\
110 	 HME_SEB_STAT_ECNTEXP  | HME_SEB_STAT_NCNTEXP | HME_SEB_STAT_MAXPKTERR|\
111 	 HME_SEB_STAT_TFIFO_UND| HME_SEB_STAT_STSTERR | HME_SEB_STAT_CVCNTEXP |\
112 	 HME_SEB_STAT_LCNTEXP  | HME_SEB_STAT_CCNTEXP |\
113 	 HME_SEB_STAT_ACNTEXP  | HME_SEB_STAT_DEBUG_ERRORS)
114 
115 #define HME_SEB_STAT_VLAN_ERRORS	\
116 	(HME_SEB_STAT_SLVPERR  | HME_SEB_STAT_SLVERR  | HME_SEB_STAT_TXTERR   |\
117 	 HME_SEB_STAT_TXPERR   | HME_SEB_STAT_TXLERR  | HME_SEB_STAT_TXEACK   |\
118 	 HME_SEB_STAT_EOPERR   | HME_SEB_STAT_RXTERR  | HME_SEB_STAT_RXPERR   |\
119 	 HME_SEB_STAT_RXLATERR | HME_SEB_STAT_RXERR   | HME_SEB_STAT_NORXD    |\
120 	 HME_SEB_STAT_DTIMEXP  | HME_SEB_STAT_FCNTEXP | HME_SEB_STAT_LCCNTEXP |\
121 	 HME_SEB_STAT_ECNTEXP  | HME_SEB_STAT_NCNTEXP |                        \
122 	 HME_SEB_STAT_TFIFO_UND| HME_SEB_STAT_STSTERR | HME_SEB_STAT_CVCNTEXP |\
123 	 HME_SEB_STAT_RFIFOVF  | HME_SEB_STAT_LCNTEXP | HME_SEB_STAT_CCNTEXP  |\
124 	 HME_SEB_STAT_ACNTEXP)
125 
126 /*
127  * HME Transmitter register offsets
128  */
129 #define HME_ETXI_PENDING	(0*4)		/* Pending/wakeup */
130 #define HME_ETXI_CFG		(1*4)
131 #define HME_ETXI_RING		(2*4)		/* Descriptor Ring pointer */
132 #define HME_ETXI_BBASE		(3*4)		/* Buffer base address (ro) */
133 #define HME_ETXI_BDISP		(4*4)		/* Buffer displacement (ro) */
134 #define HME_ETXI_FIFO_WPTR	(5*4)		/* FIFO write pointer */
135 #define HME_ETXI_FIFO_SWPTR	(6*4)		/* FIFO shadow write pointer */
136 #define HME_ETXI_FIFO_RPTR	(7*4)		/* FIFO read pointer */
137 #define HME_ETXI_FIFO_SRPTR	(8*4)		/* FIFO shadow read pointer */
138 #define HME_ETXI_FIFO_PKTCNT	(9*4)		/* FIFO packet counter */
139 #define HME_ETXI_STATEMACHINE	(10*4)		/* State machine */
140 #define HME_ETXI_RSIZE		(11*4)		/* Ring size */
141 #define HME_ETXI_BPTR		(12*4)		/* Buffer pointer */
142 
143 
144 /* TXI_PENDING bits */
145 #define HME_ETX_TP_DMAWAKEUP	0x00000001	/* Start tx (rw, auto-clear) */
146 
147 /* TXI_CFG bits */
148 #define HME_ETX_CFG_DMAENABLE	0x00000001	/* Enable TX DMA */
149 #define HME_ETX_CFG_FIFOTHRESH	0x000003fe	/* TX fifo threshold */
150 #define HME_ETX_CFG_IRQDAFTER	0x00000400	/* Intr after tx-fifo empty */
151 #define HME_ETX_CFG_IRQDBEFORE	0x00000000	/* Intr before tx-fifo empty */
152 
153 
154 /*
155  * HME Receiver register offsets
156  */
157 #define HME_ERXI_CFG		(0*4)
158 #define HME_ERXI_RING		(1*4)		/* Descriptor Ring pointer */
159 #define HME_ERXI_BPTR		(2*4)		/* Data Buffer pointer (ro) */
160 #define HME_ERXI_FIFO_WPTR	(3*4)		/* FIFO write pointer */
161 #define HME_ERXI_FIFO_SWPTR	(4*4)		/* FIFO shadow write pointer */
162 #define HME_ERXI_FIFO_RPTR	(5*4)		/* FIFO read pointer */
163 #define HME_ERXI_FIFO_SRPTR	(6*4)		/* FIFO shadow read pointer */
164 #define HME_ERXI_STATEMACHINE	(7*4)		/* State machine */
165 
166 /* ERXI_CFG bits */
167 #define HME_ERX_CFG_DMAENABLE	0x00000001	/* Enable RX DMA */
168 #define HME_ERX_CFG_BYTEOFFSET	0x00000038	/* RX first byte offset */
169 #define HME_ERX_CFG_RINGSIZE32	0x00000000	/* Descriptor ring size: 32 */
170 #define HME_ERX_CFG_RINGSIZE64	0x00000200	/* Descriptor ring size: 64 */
171 #define HME_ERX_CFG_RINGSIZE128	0x00000400	/* Descriptor ring size: 128 */
172 #define HME_ERX_CFG_RINGSIZE256	0x00000600	/* Descriptor ring size: 256 */
173 #define HME_ERX_CFG_CSUMSTART	0x007f0000	/* cksum offset (half words) */
174 #define	HME_ERX_CFG_CSUMSHIFT	16
175 
176 /*
177  * HME MAC-core register offsets
178  */
179 #define HME_MACI_XIF		(0*4)
180 #define HME_MACI_TXSWRST	(130*4)		/* TX reset */
181 #define HME_MACI_TXCFG		(131*4)		/* TX config */
182 #define HME_MACI_JSIZE		(139*4)		/* TX jam size */
183 #define HME_MACI_TXSIZE		(140*4)		/* TX max size */
184 #define HME_MACI_NCCNT		(144*4)		/* TX normal collision cnt */
185 #define HME_MACI_FCCNT		(145*4)		/* TX first collision cnt */
186 #define HME_MACI_EXCNT		(146*4)		/* TX excess collision cnt */
187 #define HME_MACI_LTCNT		(147*4)		/* TX late collision cnt */
188 #define HME_MACI_RANDSEED	(148*4)		/*  */
189 #define HME_MACI_RXSWRST	(194*4)		/* RX reset */
190 #define HME_MACI_RXCFG		(195*4)		/* RX config */
191 #define HME_MACI_RXSIZE		(196*4)		/* RX max size */
192 #define HME_MACI_MACADDR2	(198*4)		/* MAC address */
193 #define HME_MACI_MACADDR1	(199*4)
194 #define HME_MACI_MACADDR0	(200*4)
195 #define HME_MACI_STAT_RCNT	(201*4)		/* RX frame count */
196 #define HME_MACI_STAT_LCNT	(202*4)		/* Length error count */
197 #define HME_MACI_STAT_ACNT	(203*4)		/* Align error count */
198 #define HME_MACI_STAT_CCNT	(204*4)		/* FCS error count */
199 #define HME_MACI_STATE		(205*4)		/* RX_MAC state machine */
200 #define HME_MACI_STAT_CVCNT	(206*4)		/* Code violation count */
201 #define HME_MACI_HASHTAB3	(208*4)		/* Address hash table */
202 #define HME_MACI_HASHTAB2	(209*4)
203 #define HME_MACI_HASHTAB1	(210*4)
204 #define HME_MACI_HASHTAB0	(211*4)
205 #define HME_MACI_AFILTER2	(212*4)		/* Address filter */
206 #define HME_MACI_AFILTER1	(213*4)
207 #define HME_MACI_AFILTER0	(214*4)
208 #define HME_MACI_AFILTER_MASK	(215*4)
209 
210 /* XIF config register. */
211 #define HME_MAC_XIF_OE		0x00000001	/* Output driver enable */
212 #define HME_MAC_XIF_XLBACK	0x00000002	/* Loopback-mode XIF enable */
213 #define HME_MAC_XIF_MLBACK	0x00000004	/* Loopback-mode MII enable */
214 #define HME_MAC_XIF_MIIENABLE	0x00000008	/* MII receive buffer enable */
215 #define HME_MAC_XIF_SQENABLE	0x00000010	/* SQE test enable */
216 #define HME_MAC_XIF_SQETWIN	0x000003e0	/* SQE time window */
217 #define HME_MAC_XIF_LANCE	0x00000010	/* Lance mode enable */
218 #define HME_MAC_XIF_LIPG0	0x000003e0	/* Lance mode IPG0 */
219 #define HME_MAC_XIF_BITS	"\177\020"				\
220 				"b\0OE\0b\1XLBACK\0b\2MLBACK\0"		\
221 				"b\4MIIENA\0b\4SQEENA\0\0"
222 
223 /* Transmit config register. */
224 #define HME_MAC_TXCFG_ENABLE	0x00000001	/* Enable the transmitter */
225 #define HME_MAC_TXCFG_SMODE	0x00000020	/* Enable slow transmit mode */
226 #define HME_MAC_TXCFG_CIGN	0x00000040	/* Ignore transmit collisions */
227 #define HME_MAC_TXCFG_FCSOFF	0x00000080	/* Do not emit FCS */
228 #define HME_MAC_TXCFG_DBACKOFF	0x00000100	/* Disable backoff */
229 #define HME_MAC_TXCFG_FULLDPLX	0x00000200	/* Enable full-duplex */
230 #define HME_MAC_TXCFG_DGIVEUP	0x00000400	/* Don't give up on transmits */
231 #define HME_MAC_TXCFG_BITS	"\177\020"				\
232 				"b\0ENA\0b\6SMODE\0b\7IGNCOLL\0"	\
233 				"b\x8_FCSOFF\0b\x9_DBACKOFF\0"		\
234 				"b\xa_FULLDPLX\0b\xc_DGIVEUP\0\0"
235 
236 /* Receive config register. */
237 #define HME_MAC_RXCFG_ENABLE	0x00000001 /* Enable the receiver */
238 #define HME_MAC_RXCFG_PSTRIP	0x00000020 /* Pad byte strip enable */
239 #define HME_MAC_RXCFG_PMISC	0x00000040 /* Enable promiscuous mode */
240 #define HME_MAC_RXCFG_DERR	0x00000080 /* Disable error checking */
241 #define HME_MAC_RXCFG_DCRCS	0x00000100 /* Disable CRC stripping */
242 #define HME_MAC_RXCFG_ME	0x00000200 /* Receive packets addressed to me */
243 #define HME_MAC_RXCFG_PGRP	0x00000400 /* Enable promisc group mode */
244 #define HME_MAC_RXCFG_HENABLE	0x00000800 /* Enable the hash filter */
245 #define HME_MAC_RXCFG_AENABLE	0x00001000 /* Enable the address filter */
246 #define HME_MAC_RXCFG_BITS	"\177\020"				\
247 				"b\0ENA\0b\6PSTRIP\0b\7PMISC\0"		\
248 				"b\x8ERRDIS\0b\x9CRCDIS\0b\xaME\0"	\
249 				"b\xbPGRP\0b\xcHASHENA\0\xd_ADDRENA\0\0"
250 
251 /*
252  * HME MIF register offsets
253  */
254 #define HME_MIFI_BB_CLK		(0*4)	/* bit-bang clock */
255 #define HME_MIFI_BB_DATA	(1*4)	/* bit-bang data */
256 #define HME_MIFI_BB_OE		(2*4)	/* bit-bang output enable */
257 #define HME_MIFI_FO		(3*4)	/* frame output */
258 #define HME_MIFI_CFG		(4*4)	/*  */
259 #define HME_MIFI_IMASK		(5*4)	/* Interrupt mask for status change */
260 #define HME_MIFI_STAT		(6*4)	/* Status (ro, auto-clear) */
261 #define HME_MIFI_SM		(7*4)	/* State machine (ro) */
262 
263 /* MIF Configuration register */
264 #define HME_MIF_CFG_PHY		0x00000001	/* PHY select */
265 #define HME_MIF_CFG_PE		0x00000002	/* Poll enable */
266 #define HME_MIF_CFG_BBMODE	0x00000004	/* Bit-bang mode */
267 #define HME_MIF_CFG_PRADDR	0x000000f8	/* Poll register address */
268 #define HME_MIF_CFG_MDI0	0x00000100	/* MDI_0 (ro) */
269 #define HME_MIF_CFG_MDI1	0x00000200	/* MDI_1 (ro) */
270 #define HME_MIF_CFG_PPADDR	0x00007c00	/* Poll phy address */
271 #define HME_MIF_CFG_BITS	"\177\020"				\
272 				"b\0PHYEXT\0b\1POLLENA\0b\3BBMODE\0"	\
273 				"b\x8MDI0\0b\x9MDI1\0\0"
274 
275 /* MIF Frame/Output register */
276 #define HME_MIF_FO_ST		0xc0000000	/* Start of frame */
277 #define HME_MIF_FO_ST_SHIFT	30		/* */
278 #define HME_MIF_FO_OPC		0x30000000	/* Opcode */
279 #define HME_MIF_FO_OPC_SHIFT	28		/* */
280 #define HME_MIF_FO_PHYAD	0x0f800000	/* PHY Address */
281 #define HME_MIF_FO_PHYAD_SHIFT	23		/* */
282 #define HME_MIF_FO_REGAD	0x007c0000	/* Register Address */
283 #define HME_MIF_FO_REGAD_SHIFT	18		/* */
284 #define HME_MIF_FO_TAMSB	0x00020000	/* Turn-around MSB */
285 #define HME_MIF_FO_TALSB	0x00010000	/* Turn-around LSB */
286 #define HME_MIF_FO_DATA		0x0000ffff	/* data to read or write */
287 
288 /* Wired HME PHY addresses */
289 #define	HME_PHYAD_INTERNAL	1
290 #define	HME_PHYAD_EXTERNAL	0
291 
292 /*
293  * Buffer Descriptors.
294  */
295 #ifdef notdef
296 struct hme_xd {
297 	volatile uint32_t	xd_flags;
298 	volatile uint32_t	xd_addr;	/* Buffer address (DMA) */
299 };
300 #endif
301 #define HME_XD_SIZE			8
302 #define HME_XD_FLAGS(b, i)		((char *)(b) + ((i) * HME_XD_SIZE) + 0)
303 #define HME_XD_ADDR(b, i)		((char *)(b) + ((i) * HME_XD_SIZE) + 4)
304 #define HME_XD_GETFLAGS(p, b, i)					\
305 	(p) ? le32toh(*((uint32_t *)HME_XD_FLAGS(b,i))) :		\
306 		(*((uint32_t *)HME_XD_FLAGS(b,i)))
307 #define HME_XD_SETFLAGS(p, b, i, f)	do {				\
308 	*((uint32_t *)HME_XD_FLAGS(b,i)) = ((p) ? htole32((f)) : (f));	\
309 } while(/* CONSTCOND */ 0)
310 #define HME_XD_SETADDR(p, b, i, a)	do {				\
311 	*((uint32_t *)HME_XD_ADDR(b,i)) = ((p) ? htole32((a)) : (a));	\
312 } while(/* CONSTCOND */ 0)
313 
314 /* Descriptor control word flag values */
315 #define HME_XD_OWN	0x80000000	/* ownership: 1=hw, 0=sw */
316 #define HME_XD_SOP	0x40000000	/* start of packet marker (tx) */
317 #define HME_XD_OFL	0x40000000	/* buffer overflow (rx) */
318 #define HME_XD_EOP	0x20000000	/* end of packet marker (tx) */
319 #define	HME_XD_TXCKSUM	0x10000000	/* checksum enable (tx) */
320 #define	HME_XD_TXCSSTUFF 0xff00000	/* checksum stuff offset (tx) */
321 #define	HME_XD_TXCSSTUFFSHIFT  20
322 #define	HME_XD_TXCSSTART 0x000fc000	/* checksum start offset (tx) */
323 #define	HME_XD_TXCSSTARTSHIFT  14
324 #define	HME_XD_TXLENMSK	0x00003fff	/* packet length mask (tx) */
325 
326 #define HME_XD_RXLENMSK	0x3fff0000	/* packet length mask (rx) */
327 #define HME_XD_RXLENSHIFT	16
328 #define HME_XD_RXCKSUM	0x0000ffff	/* packet checksum (rx), complement */
329 
330 /* Macros to encode/decode the receive buffer size from the flags field */
331 #define HME_XD_ENCODE_RSIZE(sz)		\
332 	(((sz) << HME_XD_RXLENSHIFT) & HME_XD_RXLENMSK)
333 #define HME_XD_DECODE_RSIZE(flags)	\
334 	(((flags) & HME_XD_RXLENMSK) >> HME_XD_RXLENSHIFT)
335 
336 /* Provide encode/decode macros for the transmit buffers for symmetry */
337 #define HME_XD_ENCODE_TSIZE(sz)		\
338 	(((sz) << 0) & HME_XD_TXLENMSK)
339 #define HME_XD_DECODE_TSIZE(flags)	\
340 	(((flags) & HME_XD_TXLENMSK) >> 0)
341 
342