1 /* $NetBSD: lsi64854reg.h,v 1.5 2001/03/29 02:58:39 petrov Exp $ */ 2 3 /*- 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Paul Kranenburg. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 39 /* 40 * LSI 64854 DMA engine. Contains three independent channels 41 * designed to interface with (a) a NCR539X SCSI controller, 42 * (b) a AM7990 Ethernet controller, (c) Parallel port hardware.. 43 */ 44 45 /* 46 * Register offsets to bus handle. 47 */ 48 #define L64854_REG_CSR 0 /* Control bits */ 49 #define L64854_REG_ADDR 4 /* DMA Address */ 50 #define L64854_REG_CNT 8 /* DMA count */ 51 #define L64854_REG_CNT_MASK 0x00ffffff /* only 24 bits */ 52 #define L64854_REG_ENBAR 12 /* ENET Base register */ 53 #define L64854_REG_TEST 12 /* SCSI Test register */ 54 #define L64854_REG_HCR 16 /* PP Hardware Configuration */ 55 #define L64854_REG_OCR 18 /* PP Operation Configuration */ 56 #define L64854_REG_DR 20 /* PP Data register */ 57 #define L64854_REG_TCR 21 /* PP Transfer Control */ 58 #define L64854_REG_OR 22 /* PP Output register */ 59 #define L64854_REG_IR 23 /* PP Input register */ 60 #define L64854_REG_ICR 24 /* PP Interrupt Control */ 61 62 63 /* 64 * Control bits common to all three channels. 65 */ 66 #define L64854_INT_PEND 0x00000001 /* Interrupt pending */ 67 #define L64854_ERR_PEND 0x00000002 /* Error pending */ 68 #define L64854_DRAINING 0x0000000c /* FIFO draining */ 69 #define L64854_INT_EN 0x00000010 /* Interrupt enable */ 70 #define L64854_INVALIDATE 0x00000020 /* Invalidate FIFO */ 71 #define L64854_SLAVE_ERR 0x00000040 /* Slave access size error */ 72 #define L64854_RESET 0x00000080 /* Reset device */ 73 #define L64854_WRITE 0x00000100 /* 1: xfer to memory */ 74 #define L64854_EN_DMA 0x00000200 /* enable DMA transfers */ 75 76 #define L64854_BURST_SIZE 0x000c0000 /* Read/write burst size */ 77 #define L64854_BURST_0 0x00080000 /* no bursts (SCSI-only) */ 78 #define L64854_BURST_16 0x00000000 /* 16-byte bursts */ 79 #define L64854_BURST_32 0x00040000 /* 32-byte bursts */ 80 #define L64854_BURST_64 0x000c0000 /* 64-byte bursts (fas) */ 81 82 #define L64854_RST_FAS366 0x08000000 /* FAS366 hardware reset */ 83 84 #define L64854_DEVID 0xf0000000 /* device ID bits */ 85 86 /* 87 * SCSI DMA control bits. 88 */ 89 #define D_INT_PEND L64854_INT_PEND /* interrupt pending */ 90 #define D_ERR_PEND L64854_ERR_PEND /* error pending */ 91 #define D_DRAINING L64854_DRAINING /* fifo draining */ 92 #define D_INT_EN L64854_INT_EN /* interrupt enable */ 93 #define D_INVALIDATE L64854_INVALIDATE/* invalidate fifo */ 94 #define D_SLAVE_ERR L64854_SLAVE_ERR/* slave access size error */ 95 #define D_RESET L64854_RESET /* reset scsi */ 96 #define D_WRITE L64854_WRITE /* 1 = dev -> mem */ 97 #define D_EN_DMA L64854_EN_DMA /* enable DMA requests */ 98 #define D_EN_CNT 0x00002000 /* enable byte counter */ 99 #define D_TC 0x00004000 /* terminal count */ 100 #define D_WIDE_EN 0x00008000 /* enable wide mode SBUS DMA (fas) */ 101 #define D_DSBL_CSR_DRN 0x00010000 /* disable fifo drain on csr */ 102 #define D_DSBL_SCSI_DRN 0x00020000 /* disable fifo drain on reg */ 103 104 #define D_DIAG 0x00100000 /* disable fifo drain on addr */ 105 #define D_TWO_CYCLE 0x00200000 /* 2 clocks per transfer */ 106 #define D_FASTER 0x00400000 /* 3 clocks per transfer */ 107 #define D_TCI_DIS 0x00800000 /* disable intr on D_TC */ 108 #define D_EN_NEXT 0x01000000 /* enable auto next address */ 109 #define D_DMA_ON 0x02000000 /* enable dma from scsi XXX */ 110 #define D_DSBL_PARITY_CHK \ 111 0x02000000 /* disable checking for parity on bus (default 1:fas) */ 112 #define D_A_LOADED 0x04000000 /* address loaded */ 113 #define D_NA_LOADED 0x08000000 /* next address loaded */ 114 #define D_HW_RESET_FAS366 \ 115 0x08000000 /* hardware reset FAS366 (fas) */ 116 #define D_DEV_ID L64854_DEVID /* device ID */ 117 #define DMAREV_0 0x00000000 /* Sunray DMA */ 118 #define DMAREV_ESC 0x40000000 /* DMA ESC array */ 119 #define DMAREV_1 0x80000000 /* 'DMA' */ 120 #define DMAREV_PLUS 0x90000000 /* 'DMA+' */ 121 #define DMAREV_2 0xa0000000 /* 'DMA2' */ 122 #define DMAREV_HME 0xb0000000 /* 'HME' */ 123 124 /* 125 * revisions 0,1 and ESC have different bits. 126 */ 127 #define D_ESC_DRAIN 0x00000040 /* rev0,1,esc: drain fifo */ 128 #define D_ESC_R_PEND 0x00000400 /* rev0,1: request pending */ 129 #define D_ESC_BURST 0x00000800 /* DMA ESC: 16 byte bursts */ 130 #define D_ESC_AUTODRAIN 0x00040000 /* DMA ESC: Auto-drain */ 131 132 #define DDMACSR_BITS "\177\020" \ 133 "b\00INT\0b\01ERR\0f\02\02DRAINING\0b\04IEN\0" \ 134 "b\06SLVERR\0b\07RST\0b\10WRITE\0b\11ENDMA\0" \ 135 "b\15ENCNT\0b\16TC\0\b\20DSBL_CSR_DRN\0" \ 136 "b\21DSBL_SCSI_DRN\0f\22\2BURST\0b\25TWOCYCLE\0" \ 137 "b\26FASTER\0b\27TCIDIS\0b\30ENNXT\0b\031DMAON\0" \ 138 "b\32ALOADED\0b\33NALOADED\0" 139 140 141 /* 142 * ENET DMA control bits. 143 */ 144 #define E_INT_PEND L64854_INT_PEND /* interrupt pending */ 145 #define E_ERR_PEND L64854_ERR_PEND /* error pending */ 146 #define E_DRAINING L64854_DRAINING /* fifo draining */ 147 #define E_INT_EN L64854_INT_EN /* interrupt enable */ 148 #define E_INVALIDATE L64854_INVALIDATE/* invalidate fifo */ 149 #define E_SLAVE_ERR L64854_SLAVE_ERR/* slave access size error */ 150 #define E_RESET L64854_RESET /* reset ENET */ 151 #define E_reserved1 0x00000300 /* */ 152 #define E_DRAIN 0x00000400 /* force Ecache drain */ 153 #define E_DSBL_WR_DRN 0x00000800 /* disable Ecache drain on .. */ 154 #define E_DSBL_RD_DRN 0x00001000 /* disable Ecache drain on .. */ 155 #define E_reserved2 0x00006000 /* */ 156 #define E_ILACC 0x00008000 /* ... */ 157 #define E_DSBL_BUF_WR 0x00010000 /* no buffering of slave writes */ 158 #define E_DSBL_WR_INVAL 0x00020000 /* no Ecache invalidate on slave writes */ 159 160 #define E_reserved3 0x00100000 /* */ 161 #define E_LOOP_TEST 0x00200000 /* loopback mode */ 162 #define E_TP_AUI 0x00400000 /* 1 for TP, 0 for AUI */ 163 #define E_reserved4 0x0c800000 /* */ 164 #define E_DEV_ID L64854_DEVID /* ID bits */ 165 166 #define EDMACSR_BITS "\177\020" \ 167 "b\00INT\0b\01ERR\0f\02\02DRAINING\0b\04IEN\0" \ 168 "b\06SLVERR\0b\07RST\0b\10WRITE\0b\12DRAIN\0" \ 169 "b\13DSBL_WR_DRN\0b\14DSBL_RD_DRN\0b\17ILACC\0" \ 170 "b\20DSBL_BUF_WR\0b\21DSBL_WR_INVAL\0" \ 171 "b\25LOOPTEST\0b\26TP\0" 172 173 /* 174 * PP DMA control bits. 175 */ 176 #define P_INT_PEND L64854_INT_PEND /* interrupt pending */ 177 #define P_ERR_PEND L64854_ERR_PEND /* error pending */ 178 #define P_DRAINING L64854_DRAINING /* fifo draining */ 179 #define P_INT_EN L64854_INT_EN /* interrupt enable */ 180 #define P_INVALIDATE L64854_INVALIDATE/* invalidate fifo */ 181 #define P_SLAVE_ERR L64854_SLAVE_ERR/* slave access size error */ 182 #define P_RESET L64854_RESET /* reset PP */ 183 #define P_WRITE L64854_WRITE /* 1: xfer to memory */ 184 #define P_EN_DMA L64854_EN_DMA /* enable DMA transfers */ 185 #define P_reserved1 0x00001c00 /* */ 186 #define P_EN_CNT 0x00002000 /* enable counter */ 187 #define P_TC 0x00004000 /* terminal count */ 188 #define P_reserved2 0x00038000 /* */ 189 190 #define P_DIAG 0x00100000 /* ... */ 191 #define P_reserved3 0x00600000 /* */ 192 #define P_TCI_DIS 0x00800000 /* no interrupt on terminal count */ 193 #define P_EN_NEXT 0x01000000 /* enable DMA chaining */ 194 #define P_DMA_ON 0x02000000 /* DMA xfers enabled */ 195 #define P_A_LOADED 0x04000000 /* addr and byte count valid */ 196 #define P_NA_LOADED 0x08000000 /* next addr & count valid but not used */ 197 #define P_DEV_ID L64854_DEVID /* ID bits */ 198 199 #define PDMACSR_BITS "\177\020" \ 200 "b\00INT\0b\01ERR\0f\02\02DRAINING\0b\04IEN\0" \ 201 "b\06SLVERR\0b\07RST\0b\10WRITE\0b\11ENDMA\0" \ 202 "b\15ENCNT\0b\16TC\0\b\24DIAG\0b\27TCIDIS\0" \ 203 "b\30ENNXT\0b\031DMAON\0b\32ALOADED\0b\33NALOADED\0" 204