xref: /netbsd/sys/dev/ic/nslm7xvar.h (revision bf9ec67e)
1 /*	$NetBSD: nslm7xvar.h,v 1.8 2002/04/05 16:11:47 bouyer Exp $ */
2 
3 /*-
4  * Copyright (c) 2000 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Bill Squier.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *        This product includes software developed by the NetBSD
21  *        Foundation, Inc. and its contributors.
22  * 4. Neither the name of The NetBSD Foundation nor the names of its
23  *    contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36  * POSSIBILITY OF SUCH DAMAGE.
37  */
38 
39 #ifndef _DEV_ISA_NSLM7XVAR_H_
40 #define _DEV_ISA_NSLM7XVAR_H_
41 
42 /* ctl registers */
43 
44 #define LMC_ADDR	0x05
45 #define LMC_DATA	0x06
46 
47 /* data registers */
48 
49 #define LMD_SENSORBASE	0x20	/* Sensors occupy 0x20 -- 0x2a */
50 
51 #define LMD_CONFIG	0x40	/* Configuration */
52 #define LMD_ISR1	0x41	/* Interrupt Status 1 */
53 #define LMD_ISR2	0x42	/* Interrupt Status 2 */
54 #define LMD_SMI1	0x43	/* SMI Mask 1 */
55 #define LMD_SMI2	0x44	/* SMI Mask 2 */
56 #define LMD_NMI1	0x45	/* NMI Mask 1 */
57 #define LMD_NMI2	0x46	/* NMI Mask 2 */
58 #define LMD_VIDFAN	0x47	/* VID/Fan Divisor */
59 #define LMD_SBUSADDR	0x48	/* Serial Bus Address */
60 #define LMD_CHIPID	0x49	/* Chip Reset/ID */
61 
62 /* misc constants */
63 
64 #define LM_NUM_SENSORS	11
65 #define LM_ID_LM78	0x00
66 #define LM_ID_LM78J	0x40
67 #define LM_ID_LM79	0xC0
68 #define LM_ID_LM81	0x80
69 #define LM_ID_MASK	0xFE
70 
71 /*
72  * additionnal registers for the Winbond chips:
73  * WB83781D: mostly lm7x compatible; extra temp sensors in bank1 & 2
74  * WB83782D & WB83627HF: voltage sensors needs different handling, more FAN
75  *                       dividers; mode voltage sensors, more temp sensors.
76  */
77 #define WB_PIN		0x4B	/* pin & fan3 divider */
78 #define WB_BANKSEL	0x4E	/* banck select register */
79 #define WB_BANKSEL_B0	0x00	/* select bank 0 */
80 #define WB_BANKSEL_B1	0x01	/* select bank 1 */
81 #define WB_BANKSEL_B2	0x02	/* select bank 2 */
82 #define WB_BANKSEL_B3	0x03	/* select bank 3 */
83 #define WB_BANKSEL_B4	0x04	/* select bank 4 */
84 #define WB_BANKSEL_B5	0x05	/* select bank 5 */
85 #define WB_BANKSEL_HBAC	0x80	/* hight byte access */
86 
87 #define WB_VENDID	0x4F	/* vendor ID register */
88 #define WB_VENDID_WINBOND 0x5CA3
89 /* Bank0 regs */
90 #define WB_BANK0_CHIPID	0x58
91 #define WB_CHIPID_83781		0x10
92 #define WB_CHIPID_83781_2	0x11
93 #define WB_CHIPID_83782		0x30
94 #define WB_CHIPID_83627		0x21
95 #define WB_CHIPID_83697		0x60
96 #define WB_BANK0_FANBAT	0x5D
97 /* Bank1 regs */
98 #define WB_BANK1_T2H	0x50
99 #define WB_BANK1_T2L	0x51
100 
101 /* Bank2 regs */
102 #define WB_BANK2_T3H	0x50
103 #define WB_BANK2_T3L	0x51
104 
105 /* Bank4 regs 83782/83627 only */
106 #define WB_BANK4_T1OFF	0x54
107 #define WB_BANK4_T2OFF	0x55
108 #define WB_BANK4_T3OFF	0x56
109 
110 /* Bank5 regs 83782/83627 only */
111 #define WB_BANK5_5VSB	0x50
112 #define WB_BANK5_VBAT	0x51
113 
114 #define WB83781_NUM_SENSORS	13
115 #define WB83697_NUM_SENSORS	14
116 #define WB_NUM_SENSORS	15
117 
118 struct lm_softc {
119 	struct	device sc_dev;
120 
121 	int	lm_iobase;
122 	bus_space_tag_t lm_iot;
123 	bus_space_handle_t lm_ioh;
124 
125 	int	sc_flags;
126 	struct	timeval lastread; /* only allow reads every 1.5 seconds */
127 	struct	envsys_tre_data sensors[WB_NUM_SENSORS];
128 	struct	envsys_basic_info info[WB_NUM_SENSORS];
129 	int numsensors;
130 	void (*refresh_sensor_data) __P((struct lm_softc *));
131 
132 	struct sysmon_envsys sc_sysmon;
133 };
134 
135 void lm_attach __P((struct lm_softc *));
136 int lm_probe __P((bus_space_tag_t, bus_space_handle_t));
137 
138 #endif /* _DEV_ISA_NSLM7XVAR_H_ */
139