xref: /netbsd/sys/dev/mii/icsphyreg.h (revision bf9ec67e)
1 /*	$NetBSD: icsphyreg.h,v 1.1 1998/11/02 23:46:20 thorpej Exp $	*/
2 
3 /*-
4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
9  * NASA Ames Research Center.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. All advertising materials mentioning features or use of this software
20  *    must display the following acknowledgement:
21  *	This product includes software developed by the NetBSD
22  *	Foundation, Inc. and its contributors.
23  * 4. Neither the name of The NetBSD Foundation nor the names of its
24  *    contributors may be used to endorse or promote products derived
25  *    from this software without specific prior written permission.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37  * POSSIBILITY OF SUCH DAMAGE.
38  */
39 
40 #ifndef _DEV_MII_ICSPHYREG_H_
41 #define	_DEV_MII_ICSPHYREG_H_
42 
43 /*
44  * ICS1890 registers.
45  */
46 
47 #define	MII_ICSPHY_ECR		0x10	/* Extended Control Register */
48 #define	ECR_OVR			0x8000	/* disable command reg overwrites */
49 #define	ECR_PHYADDR_MASK	0x07c0	/* PHY address mask */
50 #define	ECR_CTEST		0x0020	/* Stream Cipher Test Mode */
51 #define	ECR_IECT		0x0004	/* Invalid Error Code Test */
52 #define	ECR_SSD			0x0001	/* Stream Cipher Disable */
53 
54 #define	MII_ICSPHY_QPR		0x11	/* Quick Poll Register */
55 #define	QPR_SPEED		0x8000	/* 100Mbps */
56 #define	QPR_FDX			0x4000	/* Full dupled */
57 #define	QPR_ANB2		0x2000	/* Autoneg monitor bit 2 */
58 #define	QPR_ANB1		0x1000	/* Autoneg monitor bit 1 */
59 #define	QPR_ANB0		0x0800	/* Autoneg monitor bit 0 */
60 #define	QPR_RXERR		0x0400	/* Receive signal lost */
61 #define	QPR_PLLERR		0x0200	/* PLL error */
62 #define	QPR_FCARR		0x0100	/* False carrier detected */
63 #define	QPR_INVALSYM		0x0080	/* Invalid Symbol Detected */
64 #define	QPR_HALT		0x0040	/* Halt Symbol Detected */
65 #define	QPR_PREEM		0x0020	/* Two Idle Symbols together */
66 #define	QPR_ACOMP		0x0010	/* Autonegotiation complete */
67 #define	QPR_JABBER		0x0004	/* Jabber detected */
68 #define	QPR_RFAULT		0x0002	/* Remote Fault */
69 #define	QPR_LINK		0x0001	/* Link */
70 
71 #define	MII_ICSPHY_TTR		0x12	/* 10baseT Operations Register */
72 #define	TTR_RJABBER		0x8000	/* Remote Jabber */
73 #define	TTR_POLARITY		0x4000	/* Polarity Reversed */
74 #define	TTR_NOJABBER		0x0020	/* Disable Jabber Check */
75 #define	TTR_LOOP		0x0010	/* Loopback mode */
76 #define	TTR_NOAPOLARITY		0x0008	/* Disable auto polarity correction */
77 #define	TTR_NOSQE		0x0004	/* Disable SQE check */
78 #define	TTR_NOLINK		0x0002	/* Disable Link check */
79 #define	TTR_NOSQUELCH		0x0001	/* Disable squelch */
80 
81 #define	MII_ICSPHY_ECR2		0x13	/* Extended Control Register 2 */
82 #define	ECR2_REPEATER		0x8000	/* Repeater Mode */
83 #define	ECR2_HWSW		0x4000	/* hw/sw config priority */
84 #define	ECR2_LPRF		0x2000	/* link partner supports rem fault */
85 #define	ECR2_FORCERF		0x0400	/* Force transmit of rem fault */
86 #define	ECR2_RFPUP		0x0010	/* Rem fault on power up */
87 #define	ECR2_Q10T		0x0004	/* Qualified 10baseT data */
88 #define	ECR2_10TPROT		0x0002	/* 10baseT protect */
89 #define	ECR2_AUTOPWRDN		0x0001	/* automatic power down */
90 
91 #endif /* _DEV_MII_ICSPHYREG_H_ */
92