1 /* $NetBSD: umct.c,v 1.7 2001/12/17 14:19:39 ichiro Exp $ */ 2 /* 3 * Copyright (c) 2001 The NetBSD Foundation, Inc. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Ichiro FUKUHARA (ichiro@ichiro.org). 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by the NetBSD 20 * Foundation, Inc. and its contributors. 21 * 4. Neither the name of The NetBSD Foundation nor the names of its 22 * contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 26 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * MCT USB-RS232 Interface Controller 40 * http://www.mct.com.tw/p_u232.html 41 * http://www.dlink.com/products/usb/dsbs25 42 */ 43 44 #include <sys/cdefs.h> 45 __KERNEL_RCSID(0, "$NetBSD: umct.c,v 1.7 2001/12/17 14:19:39 ichiro Exp $"); 46 47 #include <sys/param.h> 48 #include <sys/systm.h> 49 #include <sys/kernel.h> 50 #include <sys/malloc.h> 51 #include <sys/ioctl.h> 52 #include <sys/conf.h> 53 #include <sys/tty.h> 54 #include <sys/file.h> 55 #include <sys/select.h> 56 #include <sys/proc.h> 57 #include <sys/vnode.h> 58 #include <sys/device.h> 59 #include <sys/poll.h> 60 61 #include <dev/usb/usb.h> 62 #include <dev/usb/usbcdc.h> 63 64 #include <dev/usb/usbdi.h> 65 #include <dev/usb/usbdi_util.h> 66 #include <dev/usb/usbdevs.h> 67 #include <dev/usb/usb_quirks.h> 68 69 #include <dev/usb/usbdevs.h> 70 #include <dev/usb/ucomvar.h> 71 72 #include <dev/usb/umct.h> 73 74 #ifdef UMCT_DEBUG 75 #define DPRINTFN(n, x) if (umctdebug > (n)) logprintf x 76 int umctdebug = 0; 77 #else 78 #define DPRINTFN(n, x) 79 #endif 80 #define DPRINTF(x) DPRINTFN(0, x) 81 82 #define UMCT_CONFIG_INDEX 0 83 #define UMCT_IFACE_INDEX 0 84 85 struct umct_softc { 86 USBBASEDEVICE sc_dev; /* base device */ 87 usbd_device_handle sc_udev; /* USB device */ 88 usbd_interface_handle sc_iface; /* interface */ 89 int sc_iface_number; /* interface number */ 90 u_int16_t sc_product; 91 92 int sc_intr_number; /* interrupt number */ 93 usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */ 94 u_char *sc_intr_buf; /* interrupt buffer */ 95 int sc_isize; 96 97 usb_cdc_line_state_t sc_line_state; /* current line state */ 98 u_char sc_dtr; /* current DTR state */ 99 u_char sc_rts; /* current RTS state */ 100 u_char sc_break; /* set break */ 101 102 u_char sc_status; 103 104 device_ptr_t sc_subdev; /* ucom device */ 105 106 u_char sc_dying; /* disconnecting */ 107 108 u_char sc_lsr; /* Local status register */ 109 u_char sc_msr; /* umct status register */ 110 111 u_int last_lcr; /* keep lcr register */ 112 }; 113 114 /* 115 * These are the maximum number of bytes transferred per frame. 116 * The output buffer size cannot be increased due to the size encoding. 117 */ 118 #define UMCTIBUFSIZE 256 119 #define UMCTOBUFSIZE 256 120 121 Static void umct_init(struct umct_softc *); 122 Static void umct_set_baudrate(struct umct_softc *, u_int); 123 Static void umct_set_lcr(struct umct_softc *, u_int); 124 Static void umct_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); 125 126 Static void umct_set(void *, int, int, int); 127 Static void umct_dtr(struct umct_softc *, int); 128 Static void umct_rts(struct umct_softc *, int); 129 Static void umct_break(struct umct_softc *, int); 130 Static void umct_set_line_state(struct umct_softc *); 131 Static void umct_get_status(void *, int portno, u_char *lsr, u_char *msr); 132 Static int umct_param(void *, int, struct termios *); 133 Static int umct_open(void *, int); 134 Static void umct_close(void *, int); 135 136 struct ucom_methods umct_methods = { 137 umct_get_status, 138 umct_set, 139 umct_param, 140 NULL, 141 umct_open, 142 umct_close, 143 NULL, 144 NULL, 145 }; 146 147 static const struct usb_devno umct_devs[] = { 148 /* MCT USB-232 Interface Products */ 149 { USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 }, 150 /* Sitecom USB-232 Products */ 151 { USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 }, 152 /* D-Link DU-H3SP USB BAY Hub Products */ 153 { USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 }, 154 }; 155 #define umct_lookup(v, p) usb_lookup(umct_devs, v, p) 156 157 USB_DECLARE_DRIVER(umct); 158 159 USB_MATCH(umct) 160 { 161 USB_MATCH_START(umct, uaa); 162 163 if (uaa->iface != NULL) 164 return (UMATCH_NONE); 165 166 return (umct_lookup(uaa->vendor, uaa->product) != NULL ? 167 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 168 } 169 170 USB_ATTACH(umct) 171 { 172 USB_ATTACH_START(umct, sc, uaa); 173 usbd_device_handle dev = uaa->device; 174 usb_config_descriptor_t *cdesc; 175 usb_interface_descriptor_t *id; 176 usb_endpoint_descriptor_t *ed; 177 178 char devinfo[1024]; 179 char *devname = USBDEVNAME(sc->sc_dev); 180 usbd_status err; 181 int i, found; 182 struct ucom_attach_args uca; 183 184 usbd_devinfo(dev, 0, devinfo); 185 USB_ATTACH_SETUP; 186 printf("%s: %s\n", devname, devinfo); 187 188 sc->sc_udev = dev; 189 sc->sc_product = uaa->product; 190 191 DPRINTF(("\n\numct attach: sc=%p\n", sc)); 192 193 /* initialize endpoints */ 194 uca.bulkin = uca.bulkout = -1; 195 sc->sc_intr_number = -1; 196 sc->sc_intr_pipe = NULL; 197 198 /* Move the device into the configured state. */ 199 err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1); 200 if (err) { 201 printf("\n%s: failed to set configuration, err=%s\n", 202 devname, usbd_errstr(err)); 203 sc->sc_dying = 1; 204 USB_ATTACH_ERROR_RETURN; 205 } 206 207 /* get the config descriptor */ 208 cdesc = usbd_get_config_descriptor(sc->sc_udev); 209 210 if (cdesc == NULL) { 211 printf("%s: failed to get configuration descriptor\n", 212 USBDEVNAME(sc->sc_dev)); 213 sc->sc_dying = 1; 214 USB_ATTACH_ERROR_RETURN; 215 } 216 217 /* get the interface */ 218 err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX, 219 &sc->sc_iface); 220 if (err) { 221 printf("\n%s: failed to get interface, err=%s\n", 222 devname, usbd_errstr(err)); 223 sc->sc_dying = 1; 224 USB_ATTACH_ERROR_RETURN; 225 } 226 227 /* Find the bulk{in,out} and interrupt endpoints */ 228 229 id = usbd_get_interface_descriptor(sc->sc_iface); 230 sc->sc_iface_number = id->bInterfaceNumber; 231 found = 0; 232 233 for (i = 0; i < id->bNumEndpoints; i++) { 234 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 235 if (ed == NULL) { 236 printf("%s: no endpoint descriptor for %d\n", 237 USBDEVNAME(sc->sc_dev), i); 238 sc->sc_dying = 1; 239 USB_ATTACH_ERROR_RETURN; 240 } 241 242 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 243 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT && 244 found == 0) { 245 uca.bulkin = ed->bEndpointAddress; 246 found = 1; 247 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 248 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 249 uca.bulkout = ed->bEndpointAddress; 250 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 251 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 252 sc->sc_intr_number = ed->bEndpointAddress; 253 sc->sc_isize = UGETW(ed->wMaxPacketSize); 254 } 255 } 256 257 if (uca.bulkin == -1) { 258 printf("%s: Could not find data bulk in\n", 259 USBDEVNAME(sc->sc_dev)); 260 sc->sc_dying = 1; 261 USB_ATTACH_ERROR_RETURN; 262 } 263 264 if (uca.bulkout == -1) { 265 printf("%s: Could not find data bulk out\n", 266 USBDEVNAME(sc->sc_dev)); 267 sc->sc_dying = 1; 268 USB_ATTACH_ERROR_RETURN; 269 } 270 271 if (sc->sc_intr_number== -1) { 272 printf("%s: Could not find interrupt in\n", 273 USBDEVNAME(sc->sc_dev)); 274 sc->sc_dying = 1; 275 USB_ATTACH_ERROR_RETURN; 276 } 277 278 sc->sc_dtr = sc->sc_rts = 0; 279 uca.portno = UCOM_UNK_PORTNO; 280 /* bulkin, bulkout set above */ 281 uca.ibufsize = UMCTIBUFSIZE; 282 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) 283 uca.obufsize = 16; /* device is broken */ 284 else 285 uca.obufsize = UMCTOBUFSIZE; 286 uca.ibufsizepad = UMCTIBUFSIZE; 287 uca.opkthdrlen = 0; 288 uca.device = dev; 289 uca.iface = sc->sc_iface; 290 uca.methods = &umct_methods; 291 uca.arg = sc; 292 uca.info = NULL; 293 294 umct_init(sc); 295 296 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, 297 USBDEV(sc->sc_dev)); 298 299 DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n", 300 uca.bulkin, uca.bulkout, sc->sc_intr_number )); 301 sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch); 302 303 USB_ATTACH_SUCCESS_RETURN; 304 } 305 306 USB_DETACH(umct) 307 { 308 USB_DETACH_START(umct, sc); 309 int rv = 0; 310 311 DPRINTF(("umct_detach: sc=%p flags=%d\n", sc, flags)); 312 313 if (sc->sc_intr_pipe != NULL) { 314 usbd_abort_pipe(sc->sc_intr_pipe); 315 usbd_close_pipe(sc->sc_intr_pipe); 316 free(sc->sc_intr_buf, M_USBDEV); 317 sc->sc_intr_pipe = NULL; 318 } 319 320 sc->sc_dying = 1; 321 if (sc->sc_subdev != NULL) { 322 rv = config_detach(sc->sc_subdev, flags); 323 sc->sc_subdev = NULL; 324 } 325 326 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, 327 USBDEV(sc->sc_dev)); 328 329 return (rv); 330 } 331 332 int 333 umct_activate(device_ptr_t self, enum devact act) 334 { 335 struct umct_softc *sc = (struct umct_softc *)self; 336 int rv = 0; 337 338 switch (act) { 339 case DVACT_ACTIVATE: 340 return (EOPNOTSUPP); 341 break; 342 343 case DVACT_DEACTIVATE: 344 if (sc->sc_subdev != NULL) 345 rv = config_deactivate(sc->sc_subdev); 346 sc->sc_dying = 1; 347 break; 348 } 349 return (rv); 350 } 351 352 void 353 umct_set_line_state(struct umct_softc *sc) 354 { 355 usb_device_request_t req; 356 uByte ls; 357 358 ls = (sc->sc_dtr ? MCR_DTR : 0) | 359 (sc->sc_rts ? MCR_RTS : 0); 360 361 DPRINTF(("umct_set_line_state: DTR=%d,RTS=%d,ls=%02x\n", 362 sc->sc_dtr, sc->sc_rts, ls)); 363 364 req.bmRequestType = UMCT_SET_REQUEST; 365 req.bRequest = REQ_SET_MCR; 366 USETW(req.wValue, 0); 367 USETW(req.wIndex, sc->sc_iface_number); 368 USETW(req.wLength, LENGTH_SET_MCR); 369 370 (void)usbd_do_request(sc->sc_udev, &req, &ls); 371 } 372 373 void 374 umct_set(void *addr, int portno, int reg, int onoff) 375 { 376 struct umct_softc *sc = addr; 377 378 switch (reg) { 379 case UCOM_SET_DTR: 380 umct_dtr(sc, onoff); 381 break; 382 case UCOM_SET_RTS: 383 umct_rts(sc, onoff); 384 break; 385 case UCOM_SET_BREAK: 386 umct_break(sc, onoff); 387 break; 388 default: 389 break; 390 } 391 } 392 393 void 394 umct_dtr(struct umct_softc *sc, int onoff) 395 { 396 397 DPRINTF(("umct_dtr: onoff=%d\n", onoff)); 398 399 if (sc->sc_dtr == onoff) 400 return; 401 sc->sc_dtr = onoff; 402 403 umct_set_line_state(sc); 404 } 405 406 void 407 umct_rts(struct umct_softc *sc, int onoff) 408 { 409 DPRINTF(("umct_rts: onoff=%d\n", onoff)); 410 411 if (sc->sc_rts == onoff) 412 return; 413 sc->sc_rts = onoff; 414 415 umct_set_line_state(sc); 416 } 417 418 void 419 umct_break(struct umct_softc *sc, int onoff) 420 { 421 DPRINTF(("umct_break: onoff=%d\n", onoff)); 422 423 umct_set_lcr(sc, onoff ? sc->last_lcr | LCR_SET_BREAK : 424 sc->last_lcr); 425 } 426 427 void 428 umct_set_lcr(struct umct_softc *sc, u_int data) 429 { 430 usb_device_request_t req; 431 uByte adata; 432 433 adata = data; 434 req.bmRequestType = UMCT_SET_REQUEST; 435 req.bRequest = REQ_SET_LCR; 436 USETW(req.wValue, 0); 437 USETW(req.wIndex, sc->sc_iface_number); 438 USETW(req.wLength, LENGTH_SET_LCR); 439 440 (void)usbd_do_request(sc->sc_udev, &req, &adata); /* XXX should check */ 441 } 442 443 void 444 umct_set_baudrate(struct umct_softc *sc, u_int rate) 445 { 446 usb_device_request_t req; 447 uDWord arate; 448 u_int val; 449 450 if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) { 451 switch (rate) { 452 case 300: val = 0x01; break; 453 case 600: val = 0x02; break; 454 case 1200: val = 0x03; break; 455 case 2400: val = 0x04; break; 456 case 4800: val = 0x06; break; 457 case 9600: val = 0x08; break; 458 case 19200: val = 0x09; break; 459 case 38400: val = 0x0a; break; 460 case 57600: val = 0x0b; break; 461 case 115200: val = 0x0c; break; 462 default: val = -1; break; 463 } 464 } else { 465 val = UMCT_BAUD_RATE(rate); 466 } 467 USETDW(arate, val); 468 469 req.bmRequestType = UMCT_SET_REQUEST; 470 req.bRequest = REQ_SET_BAUD_RATE; 471 USETW(req.wValue, 0); 472 USETW(req.wIndex, sc->sc_iface_number); 473 USETW(req.wLength, LENGTH_BAUD_RATE); 474 475 (void)usbd_do_request(sc->sc_udev, &req, arate); /* XXX should check */ 476 } 477 478 void 479 umct_init(struct umct_softc *sc) 480 { 481 umct_set_baudrate(sc, 9600); 482 umct_set_lcr(sc, LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1); 483 } 484 485 int 486 umct_param(void *addr, int portno, struct termios *t) 487 { 488 struct umct_softc *sc = addr; 489 u_int data = 0; 490 491 DPRINTF(("umct_param: sc=%p\n", sc)); 492 493 DPRINTF(("umct_param: BAUDRATE=%d\n", t->c_ospeed)); 494 495 if (ISSET(t->c_cflag, CSTOPB)) 496 data |= LCR_STOP_BITS_2; 497 else 498 data |= LCR_STOP_BITS_1; 499 if (ISSET(t->c_cflag, PARENB)) { 500 if (ISSET(t->c_cflag, PARODD)) 501 data |= LCR_PARITY_ODD; 502 else 503 data |= LCR_PARITY_EVEN; 504 } else 505 data |= LCR_PARITY_NONE; 506 switch (ISSET(t->c_cflag, CSIZE)) { 507 case CS5: 508 data |= LCR_DATA_BITS_5; 509 break; 510 case CS6: 511 data |= LCR_DATA_BITS_6; 512 break; 513 case CS7: 514 data |= LCR_DATA_BITS_7; 515 break; 516 case CS8: 517 data |= LCR_DATA_BITS_8; 518 break; 519 } 520 521 umct_set_baudrate(sc, t->c_ospeed); 522 523 sc->last_lcr = data; 524 umct_set_lcr(sc, data); 525 526 return (0); 527 } 528 529 int 530 umct_open(void *addr, int portno) 531 { 532 struct umct_softc *sc = addr; 533 int err, lcr_data; 534 535 if (sc->sc_dying) 536 return (EIO); 537 538 DPRINTF(("umct_open: sc=%p\n", sc)); 539 540 /* initialize LCR */ 541 lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE | 542 LCR_STOP_BITS_1; 543 umct_set_lcr(sc, lcr_data); 544 545 if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { 546 sc->sc_status = 0; /* clear status bit */ 547 sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); 548 err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number, 549 USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, 550 sc->sc_intr_buf, sc->sc_isize, 551 umct_intr, USBD_DEFAULT_INTERVAL); 552 if (err) { 553 DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n", 554 USBDEVNAME(sc->sc_dev), sc->sc_intr_number)); 555 return (EIO); 556 } 557 } 558 559 return (0); 560 } 561 562 void 563 umct_close(void *addr, int portno) 564 { 565 struct umct_softc *sc = addr; 566 int err; 567 568 if (sc->sc_dying) 569 return; 570 571 DPRINTF(("umct_close: close\n")); 572 573 if (sc->sc_intr_pipe != NULL) { 574 err = usbd_abort_pipe(sc->sc_intr_pipe); 575 if (err) 576 printf("%s: abort interrupt pipe failed: %s\n", 577 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 578 err = usbd_close_pipe(sc->sc_intr_pipe); 579 if (err) 580 printf("%s: close interrupt pipe failed: %s\n", 581 USBDEVNAME(sc->sc_dev), usbd_errstr(err)); 582 free(sc->sc_intr_buf, M_USBDEV); 583 sc->sc_intr_pipe = NULL; 584 } 585 } 586 587 void 588 umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 589 { 590 struct umct_softc *sc = priv; 591 u_char *buf = sc->sc_intr_buf; 592 u_char mstatus, lstatus; 593 594 if (sc->sc_dying) 595 return; 596 597 if (status != USBD_NORMAL_COMPLETION) { 598 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 599 return; 600 601 DPRINTF(("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev), 602 usbd_errstr(status))); 603 usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); 604 return; 605 } 606 607 DPRINTF(("%s: umct status = MSR:%02x, LSR:%02x\n", 608 USBDEVNAME(sc->sc_dev), buf[0],buf[1])); 609 610 sc->sc_lsr = sc->sc_msr = 0; 611 mstatus = buf[0]; 612 lstatus = buf[1]; 613 if (ISSET(mstatus, MSR_DSR)) 614 sc->sc_msr |= UMSR_DSR; 615 if (ISSET(mstatus, MSR_DCD)) 616 sc->sc_msr |= UMSR_DCD; 617 ucom_status_change((struct ucom_softc *)sc->sc_subdev); 618 } 619 620 void 621 umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr) 622 { 623 struct umct_softc *sc = addr; 624 625 DPRINTF(("umct_get_status:\n")); 626 627 if (lsr != NULL) 628 *lsr = sc->sc_lsr; 629 if (msr != NULL) 630 *msr = sc->sc_msr; 631 } 632