1# /etc/bootptab: database for bootp server (/etc/bootpd) 2# Last update: gwr, Sun Dec 12 19:00:00 EDT 1993 3# Blank lines and lines beginning with '#' are ignored. 4# 5# Legend: (see bootptab.5) 6# first field -- hostname (not indented) 7# bf -- bootfile 8# bs -- bootfile size in 512-octet blocks 9# cs -- cookie servers 10# df -- dump file name 11# dn -- domain name 12# ds -- domain name servers 13# ef -- extension file 14# gw -- gateways 15# ha -- hardware address 16# hd -- home directory for bootfiles 17# hn -- host name set for client 18# ht -- hardware type 19# im -- impress servers 20# ip -- host IP address 21# lg -- log servers 22# lp -- LPR servers 23# ns -- IEN-116 name servers 24# ra -- reply address 25# rl -- resource location protocol servers 26# rp -- root path 27# sa -- boot server address 28# sm -- subnet mask 29# sw -- swap server 30# tc -- template host (points to similar host entry) 31# td -- TFTP directory 32# to -- time offset (seconds) 33# ts -- time servers 34# vm -- vendor magic number 35# Tn -- generic option tag n 36# 37# Be careful about including backslashes where they're needed. Weird (bad) 38# things can happen when a backslash is omitted where one is intended. 39# Also, note that generic option data must be either a string or a 40# sequence of bytes where each byte is a two-digit hex value. 41 42# First, we define a global entry which specifies the stuff every host uses. 43 44# If you leave "td" empty, run bootpd with the "-c /tftpboot" switch 45# so path names (boot files) will be interpreted relative to the same 46# directory as tftpd will use when opening files. 47.default:\ 48 :hn:dn="mc.com":\ 49 :td=/tftpboot:\ 50 :ds=merlin, jericho:\ 51 :to=auto: 52 53# Next, we can define different master entries for each subnet. . . 54 55.subnet16:\ 56 :tc=.default:\ 57 :sm=255.255.255.0:\ 58 :gw=merlin:\ 59 :sa=merlin: 60 61.subnet17:\ 62 :tc=.default:\ 63 :sm=255.255.255.0:\ 64 :gw=merlin-gw:\ 65 :sa=merlin-gw: 66 67# 68# We should be able to use as many levels of indirection as desired. Use 69# your imagination. . . 70# 71 72# Individual entries (could also have different servers for some/all of these 73# hosts, but we don't really use this feature at CMU): 74 75# Emulex terminal server 76emulex: tc=.subnet16:ha=00.00.C9.00.42.E0:bf=P4KTL0E: 77 78# Lantronix eps1 79eps1: tc=.subnet16:ha=00.80.A3.04.1D.78: 80 81# Tadpole 885 board. 82tp885: tc=.subnet17:ha=08.00.4C.00.2F.74:bf=tp885sys2.cfe: 83 84# MVME147 VxWorks board. 85#mvme147:tc=.subnet17:ha=08.00.3e.20.da.47:bf=mv147vxw.st: 86 87# These are just for testing 88 89walnut:tc=.subnet16:ha=walnut: 90banana:tc=.subnet17:ha=banana: 91thor:tc=.subnet17:ha=thor: 92classic:tc=.subnet16:ha=classic: 93