1 /* $NetBSD: properties.c,v 1.4 2008/04/28 20:24:17 martin Exp $ */ 2 3 /*- 4 * Copyright (c) 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Minoura Makoto. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 33 #include <sys/types.h> 34 35 #include "memswitch.h" 36 #include "methods.h" 37 38 39 /* 40 * XXX: gcc extension is used. 41 */ 42 struct property properties[] = { 43 { 44 "special", "magic1", 45 0, 4, 0, {longword:0}, 0, {longword:0}, {longword:MAGIC1}, 46 parse_dummy, 0, 0, 47 print_magic, 48 fill_ulong, flush_ulong, 49 " Magic. Must be 0x82773638\n" 50 }, 51 { 52 "special", "magic2", 53 4, 4, 0, {longword:0}, 0, {longword:0}, {longword:MAGIC2}, 54 parse_dummy, 0, 0, 55 print_magic, 56 fill_ulong, flush_ulong, 57 " Magic. Must be 0x30303057\n" 58 }, 59 { 60 "alarm", "bootmode", 61 30, 4, 0, {longword:0}, 0, {longword:0}, {longword:0}, 62 parse_ulong, 0, 0xff0000, 63 print_ulongh, 64 fill_ulong, flush_ulong, 65 " What to do on RTC alarm boot.\n" 66 }, 67 { 68 "alarm", "boottime", 69 34, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xffff0000}, 70 parse_ulong, 0, 0xffffffff, 71 print_ulongh, 72 fill_ulong, flush_ulong, 73 " Alarm.\n" 74 }, 75 { 76 "alarm", "enabled", 77 38, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 78 parse_uchar, 0, 7, 79 print_uchar, 80 fill_uchar, flush_uchar, 81 " 0 to enable alarm, 7 to disable.\n" 82 }, 83 { 84 "alarm", "timetodown", 85 20, 4, 0, {longword:0}, 0, {longword:0}, {longword:-1}, 86 parse_time, -1, 0x7fffffff, 87 print_timesec, 88 fill_ulong, flush_ulong, 89 " When boot on alarm, time to shutdown is stored in second.\n" 90 " Can be specified in minite with suffix minute.\n" 91 }, 92 { 93 "boot", "device", 94 24, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] -1}}, 95 parse_bootdev, 0, 0, 96 print_bootdev, 97 fill_ushort, flush_ushort, 98 " Boot device.\n" 99 " STD for standard, HDn for the nth harddisk, FDn for the nth floppy drive,\n" 100 " ROM for the ROM firmware, RAM for the non-volatile SRAM,\n" 101 " INSCSIn for the SCSI device ID n which is attached to the built-in adaptor,\n" 102 " EXSCSIn for the SCSI device ID n which is attached to the external adaptor.\n" 103 }, 104 { 105 "boot", "ramaddr", 106 16, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xed0100}, 107 parse_ulong, 0xed0000, 0xed3fff, 108 print_ulongh, 109 fill_ulong, flush_ulong, 110 " If boot.device specifies to boot from RAM, the start address is stored.\n" 111 }, 112 { 113 "boot", "romaddr", 114 12, 4, 0, {longword:0}, 0, {longword:0}, {longword:0xbffffc}, 115 parse_ulong, 0xe80000, 0xffffff, 116 print_ulongh, 117 fill_ulong, flush_ulong, 118 " If boot.device specifies to boot from ROM, the start address is stored.\n" 119 }, 120 { 121 "display", "contrast", 122 40, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 14}}, 123 parse_uchar, 0, 1, 124 print_uchar, 125 fill_uchar, flush_uchar, 126 " Display contrast (0-15).\n" 127 }, 128 { 129 "display", "dentakufont", 130 44, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 131 parse_uchar, 0, 1, 132 print_uchar, 133 fill_uchar, flush_uchar, 134 " In-line calculator font. 0 for LCD-like, 1 for normal.\n" 135 " Note on NetBSD in-line calculator is not supported.\n" 136 }, 137 { 138 "display", "glyphmode", 139 89, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 140 parse_uchar, 0, 0x7, 141 print_ucharh, 142 fill_uchar, flush_uchar, 143 " Glyph mode for ASCII/JIS ROMAN characters (bitmap).\n" 144 " Bit 0 (LSB) is for codepoint 0x5c (\\), bit 1 for 0x7e (~),\n" 145 " bit 2 for 0x7c (|).\n" 146 " 0 for JIS ROMAN, 1 for ASCII.\n" 147 }, 148 { 149 "display", "resolution", 150 29, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 16}}, 151 parse_uchar, 0, 18, 152 print_ucharh, 153 fill_uchar, flush_uchar, 154 " Initial display resolution.\n" 155 }, 156 { 157 "display", "tcolor0", 158 46, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0}}, 159 parse_ushort, 0, 0xffff, 160 print_ushorth, 161 fill_ushort, flush_ushort, 162 " Initial RGB value for color cell #0.\n" 163 " Note on NetBSD the value is ignored.\n" 164 }, 165 { 166 "display", "tcolor1", 167 48, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xf83e}}, 168 parse_ushort, 0, 0xffff, 169 print_ushorth, 170 fill_ushort, flush_ushort, 171 " Initial RGB value for color cell #1.\n" 172 " Note on NetBSD the value is ignored.\n" 173 }, 174 { 175 "display", "tcolor2", 176 50, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xffc0}}, 177 parse_ushort, 0, 0xffff, 178 print_ushorth, 179 fill_ushort, flush_ushort, 180 " Initial RGB value for color cell #2.\n" 181 " Note on NetBSD the value is ignored.\n" 182 }, 183 { 184 "display", "tcolor3", 185 52, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xfffe}}, 186 parse_ushort, 0, 0xffff, 187 print_ushorth, 188 fill_ushort, flush_ushort, 189 " Initial RGB value for color cell #3.\n" 190 " Note on NetBSD the value is ignored.\n" 191 }, 192 { 193 "display", "tcolor47", 194 54, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0xde6c}}, 195 parse_ushort, 0, 0xffff, 196 print_ushorth, 197 fill_ushort, flush_ushort, 198 " Initial RGB value for color cell #4-7.\n" 199 " Note on NetBSD the value is ignored.\n" 200 }, 201 { 202 "display", "tcolor8f", 203 56, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0}}, 204 parse_ushort, 0, 0xffff, 205 print_ushorth, 206 fill_ushort, flush_ushort, 207 " Initial RGB value for color cell #8-15.\n" 208 " Note on NetBSD the value is ignored.\n" 209 }, 210 { 211 "hw", "harddrive", 212 90, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 213 parse_uchar, 0, 15, 214 print_ucharh, 215 fill_uchar, flush_uchar, 216 " Number of old, SASI-compatible hard disks connected.\n" 217 " Note they are not supported on NetBSD.\n" 218 }, 219 { 220 "hw", "memory", 221 8, 4, 0, {longword:0}, 0, {longword:0}, {longword:1024*1024}, 222 parse_byte, 1024*1024, 12*1024*1024, 223 print_ulongh, 224 fill_ulong, flush_ulong, 225 " Memory size in byte.\n" 226 " Can be specified by Kilobyte and Megabyte with suffix KB and MB respectively.\n" 227 }, 228 { 229 "hw", "serial", 230 26, 2, 0, {word:{[0] 0}}, 0, {word:{[0] 0}}, {word:{[0] 0x4e07}}, 231 parse_serial, 0, 0, 232 print_serial, 233 fill_ushort, flush_ushort, 234 " Serial mode.\n" 235 " Consist of comma-separated 5 specs. The first value means speed in bps,\n" 236 " second means the bit width (5-8), third means parity (n for non parity,\n" 237 " o for odd parity, e for even parity), fourth means stop bit (2, 1 or 1.5),\n" 238 " fifth for software flow control (`-' or `s').\n" 239 " Note that the value is ignored on NetBSD.\n" 240 }, 241 { 242 "hw", "srammode", 243 45, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 244 parse_srammode, 0, 1, 245 print_srammode, 246 fill_uchar, flush_uchar, 247 " Usage of the user area of non-volatile static RAM.\n" 248 " 0 for unused, 1 for SRAMDISK, 2 for user program.\n" 249 }, 250 { 251 "hw", "upcount", 252 84, 4, 0, {longword:0}, 0, {longword:0}, {longword:0}, 253 parse_dummy, 0, 0xffffffff, 254 print_ulong, 255 fill_ulong, flush_dummy, 256 " Boot count since the SRAM is initialized.\n" 257 }, 258 { 259 "hw", "uptime", 260 76, 4, 0, {longword:0}, 0, {longword:0}, {longword:0}, 261 parse_dummy, 0, 0xffffffff, 262 print_ulong, 263 fill_ulong, flush_dummy, 264 " Total uptime since the SRAM is initialized.\n" 265 }, 266 { 267 "keyboard", "delay", 268 58, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 3}}, 269 parse_uchar, 0, 0xff, 270 print_uchar, 271 fill_uchar, flush_uchar, 272 " Delay for start keyboard autorepeat. (200+100*n) ms.\n" 273 }, 274 { 275 "keyboard", "kanalayout", 276 43, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 277 parse_uchar, 0, 1, 278 print_uchar, 279 fill_uchar, flush_uchar, 280 " Layout of kana keys. 0 for JIS, 1 for AIUEO order.\n" 281 " Note on NetBSD kana input is not supported.\n" 282 }, 283 { 284 "keyboard", "ledstat", 285 28, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 286 parse_uchar, 0, 0x7f, 287 print_uchar, 288 fill_uchar, flush_uchar, 289 " Initial keyboard LED status (bitmap).\n" 290 " Each bit means KANA, ROMAJI, CODE, CAPS, INS, HIRAGANA, ZENKAKU from LSB.\n" 291 }, 292 { 293 "keyboard", "opt2", 294 39, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 295 parse_uchar, 0, 1, 296 print_uchar, 297 fill_uchar, flush_uchar, 298 " 1 for normal, 0 for TV control.\n" 299 }, 300 { 301 "keyboard", "repeat", 302 59, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 3}}, 303 parse_uchar, 0, 0xff, 304 print_uchar, 305 fill_uchar, flush_uchar, 306 " Time elapsed between the keyboard autorepeat. (30+5*n^2 ms.\n" 307 }, 308 { 309 "poweroff", "ejectfloppy", 310 41, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 0}}, 311 parse_uchar, 0, 1, 312 print_uchar, 313 fill_uchar, flush_uchar, 314 " 1 to eject floppy disks at shutdown.\n" 315 }, 316 { 317 "poweroff", "tvctrl", 318 42, 1, 0, {byte:{[0] 0}}, 0, {byte:{[0] 0}}, {byte:{[0] 13}}, 319 parse_uchar, 0, 0xff, 320 print_uchar, 321 fill_uchar, flush_uchar, 322 " What to do at shutdown for display TV.\n" 323 }, 324 { 325 "printer", "timeout", 326 60, 4, 0, {longword:0}, 0, {longword:0}, {longword:0x80000}, 327 parse_ulong, 0, 0xffffffff, 328 print_ulong, 329 fill_ulong, flush_ulong, 330 " Printer timeout in second.\n" 331 }, 332 }; 333 334 int number_of_props = sizeof (properties) / sizeof (struct property); 335