1 /* $OpenBSD: pax.h,v 1.17 2005/11/09 19:59:06 otto Exp $ */ 2 /* $NetBSD: pax.h,v 1.3 1995/03/21 09:07:41 cgd Exp $ */ 3 4 /*- 5 * Copyright (c) 1992 Keith Muller. 6 * Copyright (c) 1992, 1993 7 * The Regents of the University of California. All rights reserved. 8 * 9 * This code is derived from software contributed to Berkeley by 10 * Keith Muller of the University of California, San Diego. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * @(#)pax.h 8.2 (Berkeley) 4/18/94 37 */ 38 39 /* 40 * BSD PAX global data structures and constants. 41 */ 42 43 #define MAXBLK 64512 /* MAX blocksize supported (posix SPEC) */ 44 /* WARNING: increasing MAXBLK past 32256 */ 45 /* will violate posix spec. */ 46 #define MAXBLK_POSIX 32256 /* MAX blocksize supported as per POSIX */ 47 #define BLKMULT 512 /* blocksize must be even mult of 512 bytes */ 48 /* Don't even think of changing this */ 49 #define DEVBLK 8192 /* default read blksize for devices */ 50 #define FILEBLK 10240 /* default read blksize for files */ 51 #define PAXPATHLEN 3072 /* maximum path length for pax. MUST be */ 52 /* longer than the system MAXPATHLEN */ 53 54 /* 55 * Pax modes of operation 56 */ 57 #define LIST 0 /* List the file in an archive */ 58 #define EXTRACT 1 /* extract the files in an archive */ 59 #define ARCHIVE 2 /* write a new archive */ 60 #define APPND 3 /* append to the end of an archive */ 61 #define COPY 4 /* copy files to destination dir */ 62 #define DEFOP LIST /* if no flags default is to LIST */ 63 64 /* 65 * Device type of the current archive volume 66 */ 67 #define ISREG 0 /* regular file */ 68 #define ISCHR 1 /* character device */ 69 #define ISBLK 2 /* block device */ 70 #define ISTAPE 3 /* tape drive */ 71 #define ISPIPE 4 /* pipe/socket */ 72 73 /* 74 * Pattern matching structure 75 * 76 * Used to store command line patterns 77 */ 78 typedef struct pattern { 79 char *pstr; /* pattern to match, user supplied */ 80 char *pend; /* end of a prefix match */ 81 char *chdname; /* the dir to change to if not NULL. */ 82 int plen; /* length of pstr */ 83 int flgs; /* processing/state flags */ 84 #define MTCH 0x1 /* pattern has been matched */ 85 #define DIR_MTCH 0x2 /* pattern matched a directory */ 86 struct pattern *fow; /* next pattern */ 87 } PATTERN; 88 89 /* 90 * General Archive Structure (used internal to pax) 91 * 92 * This structure is used to pass information about archive members between 93 * the format independent routines and the format specific routines. When 94 * new archive formats are added, they must accept requests and supply info 95 * encoded in a structure of this type. The name fields are declared statically 96 * here, as there is only ONE of these floating around, size is not a major 97 * consideration. Eventually converting the name fields to a dynamic length 98 * may be required if and when the supporting operating system removes all 99 * restrictions on the length of pathnames it will resolve. 100 */ 101 typedef struct { 102 int nlen; /* file name length */ 103 char name[PAXPATHLEN+1]; /* file name */ 104 int ln_nlen; /* link name length */ 105 char ln_name[PAXPATHLEN+1]; /* name to link to (if any) */ 106 char *org_name; /* orig name in file system */ 107 PATTERN *pat; /* ptr to pattern match (if any) */ 108 struct stat sb; /* stat buffer see stat(2) */ 109 off_t pad; /* bytes of padding after file xfer */ 110 off_t skip; /* bytes of real data after header */ 111 /* IMPORTANT. The st_size field does */ 112 /* not always indicate the amount of */ 113 /* data following the header. */ 114 u_int32_t crc; /* file crc */ 115 int type; /* type of file node */ 116 #define PAX_DIR 1 /* directory */ 117 #define PAX_CHR 2 /* character device */ 118 #define PAX_BLK 3 /* block device */ 119 #define PAX_REG 4 /* regular file */ 120 #define PAX_SLK 5 /* symbolic link */ 121 #define PAX_SCK 6 /* socket */ 122 #define PAX_FIF 7 /* fifo */ 123 #define PAX_HLK 8 /* hard link */ 124 #define PAX_HRG 9 /* hard link to a regular file */ 125 #define PAX_CTG 10 /* high performance file */ 126 #define PAX_GLL 11 /* GNU long symlink */ 127 #define PAX_GLF 12 /* GNU long file */ 128 } ARCHD; 129 130 /* 131 * Format Specific Routine Table 132 * 133 * The format specific routine table allows new archive formats to be quickly 134 * added. Overall pax operation is independent of the actual format used to 135 * form the archive. Only those routines which deal directly with the archive 136 * are tailored to the oddities of the specific format. All other routines are 137 * independent of the archive format. Data flow in and out of the format 138 * dependent routines pass pointers to ARCHD structure (described below). 139 */ 140 typedef struct { 141 char *name; /* name of format, this is the name the user */ 142 /* gives to -x option to select it. */ 143 int bsz; /* default block size. used when the user */ 144 /* does not specify a blocksize for writing */ 145 /* Appends continue to with the blocksize */ 146 /* the archive is currently using. */ 147 int hsz; /* Header size in bytes. this is the size of */ 148 /* the smallest header this format supports. */ 149 /* Headers are assumed to fit in a BLKMULT. */ 150 /* If they are bigger, get_head() and */ 151 /* get_arc() must be adjusted */ 152 int udev; /* does append require unique dev/ino? some */ 153 /* formats use the device and inode fields */ 154 /* to specify hard links. when members in */ 155 /* the archive have the same inode/dev they */ 156 /* are assumed to be hard links. During */ 157 /* append we may have to generate unique ids */ 158 /* to avoid creating incorrect hard links */ 159 int hlk; /* does archive store hard links info? if */ 160 /* not, we do not bother to look for them */ 161 /* during archive write operations */ 162 int blkalgn; /* writes must be aligned to blkalgn boundary */ 163 int inhead; /* is the trailer encoded in a valid header? */ 164 /* if not, trailers are assumed to be found */ 165 /* in invalid headers (i.e like tar) */ 166 int (*id)(char *, /* checks if a buffer is a valid header */ 167 int); /* returns 1 if it is, o.w. returns a 0 */ 168 int (*st_rd)(void); /* initialize routine for read. so format */ 169 /* can set up tables etc before it starts */ 170 /* reading an archive */ 171 int (*rd)(ARCHD *, /* read header routine. passed a pointer to */ 172 char *); /* ARCHD. It must extract the info from the */ 173 /* format and store it in the ARCHD struct. */ 174 /* This routine is expected to fill all the */ 175 /* fields in the ARCHD (including stat buf) */ 176 /* 0 is returned when a valid header is */ 177 /* found. -1 when not valid. This routine */ 178 /* set the skip and pad fields so the format */ 179 /* independent routines know the amount of */ 180 /* padding and the number of bytes of data */ 181 /* which follow the header. This info is */ 182 /* used skip to the next file header */ 183 off_t (*end_rd)(void); /* read cleanup. Allows format to clean up */ 184 /* and MUST RETURN THE LENGTH OF THE TRAILER */ 185 /* RECORD (so append knows how many bytes */ 186 /* to move back to rewrite the trailer) */ 187 int (*st_wr)(void); /* initialize routine for write operations */ 188 int (*wr)(ARCHD *); /* write archive header. Passed an ARCHD */ 189 /* filled with the specs on the next file to */ 190 /* archived. Returns a 1 if no file data is */ 191 /* is to be stored; 0 if file data is to be */ 192 /* added. A -1 is returned if a write */ 193 /* operation to the archive failed. this */ 194 /* function sets the skip and pad fields so */ 195 /* the proper padding can be added after */ 196 /* file data. This routine must NEVER write */ 197 /* a flawed archive header. */ 198 int (*end_wr)(void); /* end write. write the trailer and do any */ 199 /* other format specific functions needed */ 200 /* at the end of an archive write */ 201 int (*trail)(ARCHD *, /* returns 0 if a valid trailer, -1 if not */ 202 char *, int, /* For formats which encode the trailer */ 203 int *); /* outside of a valid header, a return value */ 204 /* of 1 indicates that the block passed to */ 205 /* it can never contain a valid header (skip */ 206 /* this block, no point in looking at it) */ 207 /* CAUTION: parameters to this function are */ 208 /* different for trailers inside or outside */ 209 /* of headers. See get_head() for details */ 210 int (*rd_data)(ARCHD *, /* read/process file data from the archive */ 211 int, off_t *); 212 int (*wr_data)(ARCHD *, /* write/process file data to the archive */ 213 int, off_t *); 214 int (*options)(void); /* process format specific options (-o) */ 215 } FSUB; 216 217 /* 218 * Format Specific Options List 219 * 220 * Used to pass format options to the format options handler 221 */ 222 typedef struct oplist { 223 char *name; /* option variable name e.g. name= */ 224 char *value; /* value for option variable */ 225 struct oplist *fow; /* next option */ 226 } OPLIST; 227 228 /* 229 * General Macros 230 */ 231 #ifndef MIN 232 #define MIN(a,b) (((a)<(b))?(a):(b)) 233 #endif 234 #define MAJOR(x) major(x) 235 #define MINOR(x) minor(x) 236 #define TODEV(x, y) makedev((x), (y)) 237 238 /* 239 * General Defines 240 */ 241 #define HEX 16 242 #define OCT 8 243 #define _PAX_ 1 244 #define _TFILE_BASE "paxXXXXXXXXXX" 245