1# Copyright 2003, 2004 Free Software Foundation, Inc.
2
3# This program is free software; you can redistribute it and/or modify
4# it under the terms of the GNU General Public License as published by
5# the Free Software Foundation; either version 2 of the License, or
6# (at your option) any later version.
7#
8# This program is distributed in the hope that it will be useful,
9# but WITHOUT ANY WARRANTY; without even the implied warranty of
10# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11# GNU General Public License for more details.
12#
13# You should have received a copy of the GNU General Public License
14# along with this program; if not, write to the Free Software
15# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
16
17# This file was written by Elena Zannoni (ezannoni@cygnus.com)
18
19if $tracelevel then {
20    strace $tracelevel
21}
22
23
24#
25# test running programs
26#
27set prms_id 0
28set bug_id 0
29
30if { [skip_cplus_tests] } { continue }
31
32set testfile "annota3"
33set srcfile ${testfile}.cc
34set binfile ${objdir}/${subdir}/${testfile}
35
36if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++ additional_flags=-w}] != "" } {
37    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
38}
39
40# are we on a target board? If so, don't run these tests.
41# note: this is necessary because we cannot use runto_main (which would
42# work for remote targets too) because of the different prompt we get
43# when using annotation level 2.
44#
45if [is_remote target] then {
46    return 0
47}
48
49
50gdb_exit
51gdb_start
52gdb_reinitialize_dir $srcdir/$subdir
53gdb_load ${binfile}
54
55if [target_info exists gdb_stub] {
56    gdb_step_for_stub;
57}
58
59#
60# line number where we need to stop in main
61#
62set main_line 25
63
64# The commands we test here produce many lines of output; disable "press
65# <return> to continue" prompts.
66send_gdb "set height 0\n"
67gdb_expect -re "$gdb_prompt $"
68
69#
70# break at main
71#
72gdb_test "break 25" \
73    "Breakpoint.*at.* file .*$srcfile, line.*" \
74    "breakpoint main"
75
76
77#
78# NOTE: this prompt is OK only when the annotation level is > 1
79# NOTE: When this prompt is in use the gdb_test procedure cannot be used because
80# it assumes that the last char of the gdb_prompt is a white space. This is not
81# true with this annotated prompt. So we must use send_gdb and gdb_expect.
82#
83
84set old_gdb_prompt $gdb_prompt
85set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
86
87send_gdb "set annotate 3\n"
88gdb_expect_list "annotation set at level 3" "\r\n$gdb_prompt$" {
89    "set annotate 3"
90}
91
92send_gdb "run\n"
93gdb_expect_list "first run until main breakpoint" "$gdb_prompt$" {
94    "\r\n\032\032post-prompt\r\n"
95    "Starting program: .*annota3 \r\n"
96    "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
97    "\r\n\032\032starting\r\n"
98    "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
99    "\r\n\032\032breakpoint 1\r\n"
100    "\r\n"
101    "Breakpoint 1, main \\(\\) at .*annota3.cc:25\r\n"
102    "\r\n\032\032source.*annota3.cc:25:.*:beg:0x\[0-9a-z\]+\r\n"
103    "\r\n\032\032stopped\r\n"
104}
105
106#
107# print class 'a' with public fields.
108#
109send_gdb "print a\n"
110gdb_expect_list "print class" "$gdb_prompt$" {
111    "\r\n\032\032post-prompt\r\n"
112    ".*= \\{x = 1, y = 2\\}\r\n"
113}
114
115#
116# continue until exit
117# this will test:
118# annotate-exited
119#
120send_gdb "continue\n"
121gdb_expect_list "continue to exit" "$gdb_prompt$" {
122    "\r\n\032\032post-prompt\r\n"
123    "Continuing.\r\n"
124    "\r\n\032\032starting\r\n"
125    "\r\n\032\032frames-invalid\r\n"
126    "a.x is 1\r\n"
127    "\r\n\032\032frames-invalid\r\n"
128    "\r\n\032\032exited 0\r\n"
129    "\r\n"
130    "Program exited normally.\r\n"
131    "\r\n\032\032frames-invalid\r\n"
132    "\r\n\032\032stopped\r\n"
133}
134
135#
136# delete all breakpoints
137#
138send_gdb "delete\n"
139gdb_expect {
140  -re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" {
141           send_gdb "y\n"
142           gdb_expect {
143	     -re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" }
144	     -re ".*$gdb_prompt$" { fail "delete bps" }
145	     timeout  { fail "delete bps (timeout)" }
146	 }
147     }
148  -re ".*$gdb_prompt$" { fail "delete bps" }
149  timeout  { fail "delete bps (timeout)" }
150}
151
152#
153# break at first line of main.
154#
155send_gdb "break 22\n"
156gdb_expect_list "break at main" "$gdb_prompt$" {
157    "\r\n\032\032post-prompt\r\n"
158    "\r\n\032\032breakpoints-invalid\r\n"
159    "Breakpoint.*at 0x\[a-z0-9\]+: file.*annota3.cc, line 22.\r\n"
160}
161
162#
163# run program up to breakpoint.
164#
165
166
167send_gdb "run\n"
168gdb_expect_list "second run until main breakpoint" "$gdb_prompt$" {
169    "\r\n\032\032post-prompt\r\n"
170    "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
171    "\r\n\032\032starting\r\n"
172    "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
173    "\r\n\032\032breakpoint 2\r\n"
174    "\r\n"
175    "Breakpoint 2, main \\(\\) at .*annota3.cc:22\r\n"
176    "\r\n\032\032source.*annota3.cc:22:.*:beg:0x\[0-9a-z\]+\r\n"
177    "\r\n\032\032stopped\r\n"
178}
179
180#
181# set up a watch point on a.x
182#
183send_gdb "watch a.x\n"
184gdb_expect_list "set watch on a.x" "$gdb_prompt$" {
185    "\r\n\032\032post-prompt\r\n"
186    "\r\n\032\032breakpoints-invalid\r\n"
187    ".*atchpoint 3: a.x\r\n" \
188}
189
190#
191# do a next, so that the watchpoint triggers. This will test:
192# annotate-watchpoint
193#
194send_gdb "next\n"
195gdb_expect {
196    -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\(\r\n\032\032frames-invalid\r\n\)+\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\nmain \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" {
197	pass "watch triggered on a.x"
198    }
199    -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
200	kfail "gdb/38" "watch triggered on a.x"
201    }
202    -re ".*$gdb_prompt$" {
203	fail "watch triggered on a.x"
204    }
205    timeout {
206	fail "watch triggered on a.x (timeout)"
207    }
208}
209
210#
211# send ^C to gdb, so that the quit() function gets called
212# and annotate-quit is tested
213# test:
214# annotate-quit
215#
216# This test sometimes fails, but not reproducibly.  See gdb/544.
217#
218send_gdb "\003"
219gdb_expect_list "annotate-quit" "$gdb_prompt$" {
220    "\r\n\032\032error-begin\r\n"
221    "Quit\r\n"
222    "\r\n\032\032quit\r\n"
223}
224
225#
226# FIXME: the testsuite does not currently have tests for
227#        annotate_catchpoints and annotate_function_call
228#        and a few variants of the annotations that are
229#        tested (marked by FIXME on the annot?.exp files)
230#
231
232# reinstall the old prompt for the rest of the testsuite.
233
234set gdb_prompt $old_gdb_prompt
235
236