1 /* i370.h -- Header file for S/390 opcode table 2 Copyright 1994, 1995, 1998, 1999, 2000, 2003 Free Software Foundation, Inc. 3 PowerPC version written by Ian Lance Taylor, Cygnus Support 4 Rewritten for i370 ESA/390 support, Linas Vepstas <linas@linas.org> 5 6 This file is part of GDB, GAS, and the GNU binutils. 7 8 GDB, GAS, and the GNU binutils are free software; you can redistribute 9 them and/or modify them under the terms of the GNU General Public 10 License as published by the Free Software Foundation; either version 11 1, or (at your option) any later version. 12 13 GDB, GAS, and the GNU binutils are distributed in the hope that they 14 will be useful, but WITHOUT ANY WARRANTY; without even the implied 15 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 16 the GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this file; see the file COPYING. If not, write to the Free 20 Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ 21 22 #ifndef I370_H 23 #define I370_H 24 25 /* The opcode table is an array of struct i370_opcode. */ 26 typedef union 27 { 28 unsigned int i[2]; 29 unsigned short s[4]; 30 unsigned char b[8]; 31 } i370_insn_t; 32 33 struct i370_opcode 34 { 35 /* The opcode name. */ 36 const char *name; 37 38 /* the length of the instruction */ 39 char len; 40 41 /* The opcode itself. Those bits which will be filled in with 42 operands are zeroes. */ 43 i370_insn_t opcode; 44 45 /* The opcode mask. This is used by the disassembler. This is a 46 mask containing ones indicating those bits which must match the 47 opcode field, and zeroes indicating those bits which need not 48 match (and are presumably filled in by operands). */ 49 i370_insn_t mask; 50 51 /* One bit flags for the opcode. These are used to indicate which 52 specific processors support the instructions. The defined values 53 are listed below. */ 54 unsigned long flags; 55 56 /* An array of operand codes. Each code is an index into the 57 operand table. They appear in the order which the operands must 58 appear in assembly code, and are terminated by a zero. */ 59 unsigned char operands[8]; 60 }; 61 62 /* The table itself is sorted by major opcode number, and is otherwise 63 in the order in which the disassembler should consider 64 instructions. */ 65 extern const struct i370_opcode i370_opcodes[]; 66 extern const int i370_num_opcodes; 67 68 /* Values defined for the flags field of a struct i370_opcode. */ 69 70 /* Opcode is defined for the original 360 architecture. */ 71 #define I370_OPCODE_360 (0x01) 72 73 /* Opcode is defined for the 370 architecture. */ 74 #define I370_OPCODE_370 (0x02) 75 76 /* Opcode is defined for the 370-XA architecture. */ 77 #define I370_OPCODE_370_XA (0x04) 78 79 /* Opcode is defined for the ESA/370 architecture. */ 80 #define I370_OPCODE_ESA370 (0x08) 81 82 /* Opcode is defined for the ESA/390 architecture. */ 83 #define I370_OPCODE_ESA390 (0x10) 84 85 /* Opcode is defined for the ESA/390 w/ BFP facility. */ 86 #define I370_OPCODE_ESA390_BF (0x20) 87 88 /* Opcode is defined for the ESA/390 w/ branch & set authority facility. */ 89 #define I370_OPCODE_ESA390_BS (0x40) 90 91 /* Opcode is defined for the ESA/390 w/ checksum facility. */ 92 #define I370_OPCODE_ESA390_CK (0x80) 93 94 /* Opcode is defined for the ESA/390 w/ compare & move extended facility. */ 95 #define I370_OPCODE_ESA390_CM (0x100) 96 97 /* Opcode is defined for the ESA/390 w/ flt.pt. support extensions facility. */ 98 #define I370_OPCODE_ESA390_FX (0x200) 99 100 /* Opcode is defined for the ESA/390 w/ HFP facility. */ 101 #define I370_OPCODE_ESA390_HX (0x400) 102 103 /* Opcode is defined for the ESA/390 w/ immediate & relative facility. */ 104 #define I370_OPCODE_ESA390_IR (0x800) 105 106 /* Opcode is defined for the ESA/390 w/ move-inverse facility. */ 107 #define I370_OPCODE_ESA390_MI (0x1000) 108 109 /* Opcode is defined for the ESA/390 w/ program-call-fast facility. */ 110 #define I370_OPCODE_ESA390_PC (0x2000) 111 112 /* Opcode is defined for the ESA/390 w/ perform-locked-op facility. */ 113 #define I370_OPCODE_ESA390_PL (0x4000) 114 115 /* Opcode is defined for the ESA/390 w/ square-root facility. */ 116 #define I370_OPCODE_ESA390_QR (0x8000) 117 118 /* Opcode is defined for the ESA/390 w/ resume-program facility. */ 119 #define I370_OPCODE_ESA390_RP (0x10000) 120 121 /* Opcode is defined for the ESA/390 w/ set-address-space-fast facility. */ 122 #define I370_OPCODE_ESA390_SA (0x20000) 123 124 /* Opcode is defined for the ESA/390 w/ subspace group facility. */ 125 #define I370_OPCODE_ESA390_SG (0x40000) 126 127 /* Opcode is defined for the ESA/390 w/ string facility. */ 128 #define I370_OPCODE_ESA390_SR (0x80000) 129 130 /* Opcode is defined for the ESA/390 w/ trap facility. */ 131 #define I370_OPCODE_ESA390_TR (0x100000) 132 133 #define I370_OPCODE_ESA390_SUPERSET (0x1fffff) 134 135 136 /* The operands table is an array of struct i370_operand. */ 137 138 struct i370_operand 139 { 140 /* The number of bits in the operand. */ 141 int bits; 142 143 /* How far the operand is left shifted in the instruction. */ 144 int shift; 145 146 /* Insertion function. This is used by the assembler. To insert an 147 operand value into an instruction, check this field. 148 149 If it is NULL, execute 150 i |= (op & ((1 << o->bits) - 1)) << o->shift; 151 (i is the instruction which we are filling in, o is a pointer to 152 this structure, and op is the opcode value; this assumes twos 153 complement arithmetic). 154 155 If this field is not NULL, then simply call it with the 156 instruction and the operand value. It will return the new value 157 of the instruction. If the ERRMSG argument is not NULL, then if 158 the operand value is illegal, *ERRMSG will be set to a warning 159 string (the operand will be inserted in any case). If the 160 operand value is legal, *ERRMSG will be unchanged (most operands 161 can accept any value). */ 162 i370_insn_t (*insert) 163 (i370_insn_t instruction, long op, const char **errmsg); 164 165 /* Extraction function. This is used by the disassembler. To 166 extract this operand type from an instruction, check this field. 167 168 If it is NULL, compute 169 op = ((i) >> o->shift) & ((1 << o->bits) - 1); 170 if ((o->flags & I370_OPERAND_SIGNED) != 0 171 && (op & (1 << (o->bits - 1))) != 0) 172 op -= 1 << o->bits; 173 (i is the instruction, o is a pointer to this structure, and op 174 is the result; this assumes twos complement arithmetic). 175 176 If this field is not NULL, then simply call it with the 177 instruction value. It will return the value of the operand. If 178 the INVALID argument is not NULL, *INVALID will be set to 179 non-zero if this operand type can not actually be extracted from 180 this operand (i.e., the instruction does not match). If the 181 operand is valid, *INVALID will not be changed. */ 182 long (*extract) (i370_insn_t instruction, int *invalid); 183 184 /* One bit syntax flags. */ 185 unsigned long flags; 186 187 /* name -- handy for debugging, otherwise pointless */ 188 char * name; 189 }; 190 191 /* Elements in the table are retrieved by indexing with values from 192 the operands field of the i370_opcodes table. */ 193 194 extern const struct i370_operand i370_operands[]; 195 196 /* Values defined for the flags field of a struct i370_operand. */ 197 198 /* This operand should be wrapped in parentheses rather than 199 separated from the previous by a comma. This is used for S, RS and 200 SS form instructions which want their operands to look like 201 reg,displacement(basereg) */ 202 #define I370_OPERAND_SBASE (0x01) 203 204 /* This operand is a base register. It may or may not appear next 205 to an index register, i.e. either of the two forms 206 reg,displacement(basereg) 207 reg,displacement(index,basereg) */ 208 #define I370_OPERAND_BASE (0x02) 209 210 /* This pair of operands should be wrapped in parentheses rather than 211 separated from the last by a comma. This is used for the RX form 212 instructions which want their operands to look like 213 reg,displacement(index,basereg) */ 214 #define I370_OPERAND_INDEX (0x04) 215 216 /* This operand names a register. The disassembler uses this to print 217 register names with a leading 'r'. */ 218 #define I370_OPERAND_GPR (0x08) 219 220 /* This operand names a floating point register. The disassembler 221 prints these with a leading 'f'. */ 222 #define I370_OPERAND_FPR (0x10) 223 224 /* This operand is a displacement. */ 225 #define I370_OPERAND_RELATIVE (0x20) 226 227 /* This operand is a length, such as that in SS form instructions. */ 228 #define I370_OPERAND_LENGTH (0x40) 229 230 /* This operand is optional, and is zero if omitted. This is used for 231 the optional B2 field in the shift-left, shift-right instructions. The 232 assembler must count the number of operands remaining on the line, 233 and the number of operands remaining for the opcode, and decide 234 whether this operand is present or not. The disassembler should 235 print this operand out only if it is not zero. */ 236 #define I370_OPERAND_OPTIONAL (0x80) 237 238 239 /* Define some misc macros. We keep them with the operands table 240 for simplicity. The macro table is an array of struct i370_macro. */ 241 242 struct i370_macro 243 { 244 /* The macro name. */ 245 const char *name; 246 247 /* The number of operands the macro takes. */ 248 unsigned int operands; 249 250 /* One bit flags for the opcode. These are used to indicate which 251 specific processors support the instructions. The values are the 252 same as those for the struct i370_opcode flags field. */ 253 unsigned long flags; 254 255 /* A format string to turn the macro into a normal instruction. 256 Each %N in the string is replaced with operand number N (zero 257 based). */ 258 const char *format; 259 }; 260 261 extern const struct i370_macro i370_macros[]; 262 extern const int i370_num_macros; 263 264 265 #endif /* I370_H */ 266