1 /* $OpenBSD: scifreg.h,v 1.2 2021/03/11 11:17:00 jsg Exp $ */ 2 /* $NetBSD: scifreg.h,v 1.10 2006/02/18 00:41:32 uwe Exp $ */ 3 4 /*- 5 * Copyright (C) 1999 SAITOH Masanobu. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 /* 31 * Serial Communication Interface with FIFO (SCIF) 32 */ 33 34 #define SH3_SCIF0_BASE 0xa4000150 35 #define SH3_SCIF1_BASE 0xa4000140 36 37 #define SH4_SCIF_BASE 0xffe80000 38 39 #ifdef SH3 40 41 /* SH3 definitions */ 42 43 #define SCIF_SMR 0x0 /* serial mode */ 44 #define SCIF_BRR 0x2 /* bit rate */ 45 #define SCIF_SCR 0x4 /* serial control */ 46 #define SCIF_FTDR 0x6 /* transmit fifo data */ 47 #define SCIF_SSR 0x8 /* serial status */ 48 #define SCIF_FRDR 0xa /* receive fifo data */ 49 #define SCIF_FCR 0xc /* fifo control */ 50 #define SCIF_FDR 0xe /* fifo data count set */ 51 52 #define SHREG_SCSMR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_SMR)) 53 #define SHREG_SCBRR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_BRR)) 54 #define SHREG_SCSCR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_SCR)) 55 #define SHREG_SCFTDR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FTDR)) 56 #define SHREG_SCSSR2 (*(volatile uint16_t *)(SH3_SCIF0_BASE + SCIF_SSR)) 57 #define SHREG_SCFRDR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FRDR)) 58 #define SHREG_SCFCR2 (*(volatile uint8_t *)(SH3_SCIF0_BASE + SCIF_FCR)) 59 #define SHREG_SCFDR2 (*(volatile uint16_t *)(SH3_SCIF0_BASE + SCIF_FDR)) 60 61 #else /* !SH3 */ 62 63 /* SH4 definitions */ 64 65 #define SCIF_SMR 0x00 /* serial mode */ 66 #define SCIF_BRR 0x04 /* bit rate */ 67 #define SCIF_SCR 0x08 /* serial control */ 68 #define SCIF_FTDR 0x0c /* transmit fifo data */ 69 #define SCIF_SSR 0x10 /* serial status */ 70 #define SCIF_FRDR 0x14 /* receive fifo data */ 71 #define SCIF_FCR 0x18 /* fifo control */ 72 #define SCIF_FDR 0x1c /* fifo data count set */ 73 74 #define SCIF_SPTR 0x20 /* seial port */ 75 #define SCIF_LSR 0x24 /* line status */ 76 77 #define SHREG_SCSMR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SMR)) 78 #define SHREG_SCBRR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_BRR)) 79 #define SHREG_SCSCR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SCR)) 80 #define SHREG_SCFTDR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_FTDR)) 81 #define SHREG_SCSSR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SSR)) 82 #define SHREG_SCFRDR2 (*(volatile uint8_t *)(SH4_SCIF_BASE + SCIF_FRDR)) 83 #define SHREG_SCFCR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_FCR)) 84 #define SHREG_SCFDR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_FDR)) 85 86 #define SHREG_SCSPTR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_SPTR)) 87 #define SHREG_SCLSR2 (*(volatile uint16_t *)(SH4_SCIF_BASE + SCIF_LSR)) 88 89 /* alias */ 90 #define SHREG_SCSFDR2 SHREG_SCFTDR2 91 #define SHREG_SCFSR2 SHREG_SCSSR2 92 93 #define SCSPTR2_RTSIO 0x0080 94 #define SCSPTR2_RTSDT 0x0040 95 #define SCSPTR2_CTSIO 0x0020 96 #define SCSPTR2_CTSDT 0x0010 97 #define SCSPTR2_SCKIO 0x0008 98 #define SCSPTR2_SCKDT 0x0004 99 #define SCSPTR2_SPB2IO 0x0002 100 #define SCSPTR2_SPB2DT 0x0001 101 102 #define SCLSR2_ORER 0x0001 /* overrun error */ 103 104 #endif /* !SH3 */ 105 106 /* SMR: serial mode */ 107 #define SCSMR2_CHR 0x40 /* character width (set = 7bit) */ 108 #define SCSMR2_PE 0x20 /* Parity Enable */ 109 #define SCSMR2_O 0x10 /* parity mode Odd */ 110 #define SCSMR2_STOP 0x08 /* STOP bit (set = 2 stop bits) */ 111 #define SCSMR2_CKS1 0x02 /* ClocK Select 1 */ 112 #define SCSMR2_CKS0 0x01 /* ClocK Select 0 */ 113 114 /* SMR: serial mode (for IrDA) */ 115 #define SCSMR2_IRMOD 0x80 /* IrDA mode */ 116 #define SCSMR2_ICK3 0x40 117 #define SCSMR2_ICK2 0x20 118 #define SCSMR2_ICK1 0x10 119 #define SCSMR2_ICK0 0x08 120 #define SCSMR2_PSEL 0x04 /* Pulse width SELelect */ 121 122 /* SCR: serial control */ 123 #define SCSCR2_TIE 0x80 /* Transmit Interrupt Enable */ 124 #define SCSCR2_RIE 0x40 /* Receive Interrupt Enable */ 125 #define SCSCR2_TE 0x20 /* Transmit Enable */ 126 #define SCSCR2_RE 0x10 /* Receive Enable */ 127 #define SCSCR2_CKE1 0x02 /* ClocK Enable 1 */ 128 #define SCSCR2_CKE0 0x01 /* ClocK Enable 0 (not in sh4) */ 129 130 /* SSR: serial status */ 131 #define SCSSR2_ER 0x0080 /* ERror */ 132 #define SCSSR2_TEND 0x0040 /* Transmit END */ 133 #define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */ 134 #define SCSSR2_BRK 0x0010 /* BReaK detection */ 135 #define SCSSR2_FER 0x0008 /* Framing ERror */ 136 #define SCSSR2_PER 0x0004 /* Parity ERror */ 137 #define SCSSR2_RDF 0x0002 /* Receive fifo Data Full */ 138 #define SCSSR2_DR 0x0001 /* Data Ready */ 139 140 /* FCR: fifo control */ 141 #define SCFCR2_RTRG1 0x80 /* Receive TRiGger 1 */ 142 #define SCFCR2_RTRG0 0x40 /* Receive TRiGger 0 */ 143 #define SCFCR2_TTRG1 0x20 /* Transmit TRiGger 1 */ 144 #define SCFCR2_TTRG0 0x10 /* Transmit TRiGger 0 */ 145 #define SCFCR2_MCE 0x08 /* Modem Control Enable */ 146 #define SCFCR2_TFRST 0x04 /* Transmit Fifo register ReSeT */ 147 #define SCFCR2_RFRST 0x02 /* Receive Fifo register ReSeT */ 148 #define SCFCR2_LOOP 0x01 /* LOOP back test */ 149 150 #define FIFO_RCV_TRIGGER_1 0x00 151 #define FIFO_RCV_TRIGGER_4 0x40 152 #define FIFO_RCV_TRIGGER_8 0x80 153 #define FIFO_RCV_TRIGGER_14 0xc0 154 155 #define FIFO_XMT_TRIGGER_8 0x00 156 #define FIFO_XMT_TRIGGER_4 0x10 157 #define FIFO_XMT_TRIGGER_2 0x20 158 #define FIFO_XMT_TRIGGER_1 0x30 159 160 /* FDR: fifo data count set */ 161 #define SCFDR2_TXCNT 0xff00 /* Tx CouNT */ 162 #define SCFDR2_RECVCNT 0x00ff /* Rx CouNT */ 163 #define SCFDR2_TXF_FULL 0x1000 /* Tx FULL */ 164 #define SCFDR2_RXF_EPTY 0x0000 /* Rx EMPTY */ 165