1#Copyright 1989, 1990, 1991, 1992 Free Software Foundation, Inc. 2 3# This file is part of GDB. 4 5# This program is free software; you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 2 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program; if not, write to the Free Software 17# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 19prefix = /usr/local 20 21program_transform_name = 22exec_prefix = $(prefix) 23bindir = /usr/bin 24libdir = $(exec_prefix)/lib 25tooldir = $(libdir)/$(target_alias) 26 27datadir = $(prefix)/lib 28mandir = $(prefix)/man 29man1dir = $(mandir)/man1 30man2dir = $(mandir)/man2 31man3dir = $(mandir)/man3 32man4dir = $(mandir)/man4 33man5dir = $(mandir)/man5 34man6dir = $(mandir)/man6 35man7dir = $(mandir)/man7 36man8dir = $(mandir)/man8 37man9dir = $(mandir)/man9 38infodir = $(prefix)/info 39includedir = $(prefix)/include 40docdir = $(datadir)/doc 41 42SHELL = /bin/sh 43 44xbindir = /usr/bin/X11 45xlibdir = /usr/lib/X11 46 47INSTALL = install -c 48INSTALL_PROGRAM = $(INSTALL) 49INSTALL_DATA = $(INSTALL) 50 51AR = ar 52AR_FLAGS = qv 53RANLIB = ranlib 54 55# Flags that describe where you can find the termcap library. 56# This can be overridden in the host Makefile fragment file. 57TERMCAP = -ltermcap 58 59# System V: If you compile gdb with a compiler which uses the coff 60# encapsulation feature (this is a function of the compiler used, NOT 61# of the m-?.h file selected by config.gdb), you must make sure that 62# the GNU nm is the one that is used by munch. 63 64# If you are compiling with GCC, make sure that either 1) You use the 65# -traditional flag, or 2) You have the fixed include files where GCC 66# can reach them. Otherwise the ioctl calls in inflow.c 67# will be incorrectly compiled. The "fixincludes" script in the gcc 68# distribution will fix your include files up. 69#CC=cc 70#CC=gcc -traditional 71CC=gcc -O2 72GCC=gcc 73 74# Directory containing source files. Don't clean up the spacing, 75# this exact string is matched for by the "configure" script. 76srcdir = . 77 78# It is also possible that you will need to add -I/usr/include/sys to the 79# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which 80# is where it should be according to Posix). 81 82BISON=yacc 83YACC=$(BISON) 84 85# Documentation (gdb.dvi) needs either GNU m4 or SysV m4; 86# Berkeley/Sun don't have quite enough. 87#M4=/usr/5bin/m4 88M4=gm4 89 90# where to find texinfo; GDB dist should include a recent one 91TEXIDIR=${srcdir}/../texinfo/fsf 92 93# where to find makeinfo, preferably one designed for texinfo-2 94MAKEINFO=makeinfo 95 96# Set this up with gcc if you have gnu ld and the loader will print out 97# line numbers for undefinded refs. 98#CC-LD=gcc -static 99CC-LD=${CC} 100 101# Where is the "include" directory? Traditionally ../include or ./include 102INCLUDE_DIR = ${srcdir}/../include 103INCLUDE_DEP = $$(INCLUDE_DIR) 104 105# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc 106# or ./mmalloc (When we want the binary library built from it, we use 107# ${MMALLOC_DIR}${subdir}.) 108# Note that mmalloc can still be used on systems without mmap(). 109# To use your system malloc, comment out the following defines. 110MMALLOC_DIR = ${srcdir}/../mmalloc 111MMALLOC_DEP = $$(MMALLOC_DIR) 112MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a 113# To use your system malloc, uncomment MMALLOC_DISABLE. 114#MMALLOC_DISABLE = -DNO_MMALLOC 115# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK 116#MMALLOC_CHECK = -DNO_MMALLOC_CHECK 117MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE} 118 119# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd 120# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) 121BFD_DIR = ${srcdir}/../bfd 122BFD_DEP = $$(BFD_DIR) 123BFD_LIB = ./../bfd${subdir}/libbfd.a 124 125# Where is the source dir for the READLINE library? Traditionally in .. or . 126# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) 127READLINE_DIR = ${srcdir}/../readline 128READLINE_DEP = $$(READLINE_DIR) 129RL_LIB = ./../readline${subdir}/libreadline.a 130 131# All the includes used for CFLAGS and for lint. 132# -I. for config files. 133# -I${srcdir} possibly for regex.h also. 134INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) 135 136# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS 137# from the config/ directory. 138GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} 139#PROFILE_CFLAGS = -pg 140 141# CFLAGS is specifically reserved for setting from the command line 142# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". 143CFLAGS = -g 144# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. 145INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} 146# None of the things in CFLAGS will do any harm, and on some systems 147# (e.g. SunOS4) it is important to use the MH_CFLAGS. 148LDFLAGS = $(CFLAGS) 149 150# Where is the "-liberty" library, containing getopt and obstack? 151LIBIBERTY_DIR = ${srcdir}/../libiberty 152LIBIBERTY = ./../libiberty${subdir}/libiberty.a 153 154# Where is the "-lopcodes" library, with (some of) the opcode tables and 155# disassemblers? 156OPCODES = ./../opcodes${subdir}/libopcodes.a 157 158# The config/mh-* file must define REGEX and REGEX1 on USG machines. 159# If your sysyem is missing alloca(), or, more likely, it's there but 160# it doesn't work, define ALLOCA & ALLOCA1 too. 161 162# Libraries and corresponding dependencies for compiling gdb. 163# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. 164# TERMCAP comes after readline, since readline depends on it. 165CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \ 166 ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} 167CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \ 168 ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} 169 170ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} 171ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} 172 173VERSION = 4.7 174DIST=gdb 175 176LINT=/usr/5bin/lint 177LINTFLAGS= -I${BFD_DIR} 178 179# Host and target-dependent makefile fragments come in here. 180#### 181# End of host and target-dependent makefile fragments 182LBL_SRC = kcore.c remote-sl.c remote-fp.c kernel.c cmdparse.c 183LBL_OBJ = $(LBL_SRC:.c=.o) 184 185#SYMREADERS = dbxread.c coffread.c elfread.c dwarfread.c \ 186# xcoffread.c stabsread.c mipsread.c 187SYMREADERS = dbxread.c stabsread.c 188SYMREADOBJ = $(SYMREADERS:.c=.o) 189 190FLAGS_TO_PASS = \ 191 "against=$(against)" \ 192 "AR=$(AR)" \ 193 "AR_FLAGS=$(AR_FLAGS)" \ 194 "CC=$(CC)" \ 195 "CFLAGS=$(CFLAGS) $(MT_CFLAGS)" \ 196 "RANLIB=$(RANLIB)" \ 197 "MAKEINFO=$(MAKEINFO)" \ 198 "INSTALL=$(INSTALL)" \ 199 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ 200 "INSTALL_DATA=$(INSTALL_DATA)" \ 201 "BISON=$(BISON)" 202 203# Source files in the main directory. 204# Files which are included via a config/* Makefile fragment 205# should *not* be specified here; they're in "ALLDEPFILES". 206SFILES_MAINDIR = \ 207 blockframe.c breakpoint.c command.c core.c demangle.c \ 208 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ 209 main.c printcmd.c gdbtypes.c \ 210 remote.c source.c stack.c symmisc.c symtab.c symfile.c \ 211 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \ 212 mem-break.c target.c \ 213 $(SYMREADERS) \ 214 ieee-float.c language.c parse.c buildsym.c objfiles.c \ 215 minsyms.c maint.c \ 216 $(LBL_SRC) xgdb.c 217 218# Source files in subdirectories (which will be handled separately by 219# 'make gdb.tar.Z'). 220# Files which are included via a config/* Makefile fragment 221# should *not* be specified here; they're in "ALLDEPFILES". 222SFILES_SUBDIR = \ 223 ${srcdir}/vx-share/dbgRpcLib.h \ 224 ${srcdir}/vx-share/ptrace.h \ 225 ${srcdir}/vx-share/reg.h \ 226 ${srcdir}/vx-share/vxTypes.h \ 227 ${srcdir}/vx-share/vxWorks.h \ 228 ${srcdir}/vx-share/wait.h \ 229 ${srcdir}/vx-share/xdr_ld.h \ 230 ${srcdir}/vx-share/xdr_ptrace.h \ 231 ${srcdir}/vx-share/xdr_rdb.h \ 232 ${srcdir}/vx-share/xdr_regs.h \ 233 ${srcdir}/nindy-share/b.out.h \ 234 ${srcdir}/nindy-share/block_io.h \ 235 ${srcdir}/nindy-share/coff.h \ 236 ${srcdir}/nindy-share/demux.h \ 237 ${srcdir}/nindy-share/env.h \ 238 ${srcdir}/nindy-share/stop.h \ 239 ${srcdir}/nindy-share/ttycntl.h 240 241# Non-source files in subdirs, that should go into gdb.tar.Z. 242NONSRC_SUBDIR = \ 243 ${srcdir}/nindy-share/Makefile \ 244 ${srcdir}/nindy-share/VERSION \ 245 ${srcdir}/nindy-share/README \ 246 ${srcdir}/vx-share/README 247 248# All source files that go into linking GDB, except config-specified files. 249SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) 250 251# All source files that lint should look at 252LINTFILES = $(SFILES) $(YYFILES) init.c 253 254# Any additional files specified on these lines should also be added to 255# the OTHERS = definition below, so they go in the tar files. 256SFILES_STAND = $(SFILES) standalone.c 257SFILES_KGDB = $(SFILES) stuff.c kdb-start.c 258 259# Header files that are not named in config/* Makefile fragments go here. 260HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h \ 261 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \ 262 gdb-stabs.h ieee-float.h inferior.h language.h \ 263 minimon.h objfiles.h parser-defs.h partial-stab.h \ 264 serial.h signals.h solib.h symfile.h symtab.h stabsread.h \ 265 target.h terminal.h xcoffsolib.h value.h \ 266 tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \ 267 xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \ 268 nm-i386bsd.h nm-i386mach.h nm-i386sco.h nm-i386v.h nm-i386v4.h nm-irix3.h \ 269 nm-irix4.h nm-linux.h nm-m88k.h nm-mips.h nm-news.h nm-rs6000.h \ 270 nm-sun2.h nm-sun3.h nm-sun386.h nm-sun4os4.h nm-trash.h \ 271 nm-ultra3.h nm-hppab.h nm-hppah.h nm-umax.h nm-sysv4.h 272 273REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar 274 275POSSLIBS_MAINDIR = regex.c regex.h alloca.c 276POSSLIBS = $(POSSLIBS_MAINDIR) 277 278TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c 279 280OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \ 281 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \ 282 README TODO TAGS NEWS Projects \ 283 .gdbinit COPYING $(YYFILES) \ 284 copying.c Convex.notes copying.awk \ 285 saber.suppress standalone.c stuff.c kdb-start.c \ 286 putenv.c gcc.patch XGDB-README 287 288# Subdirectories of gdb, which should be included in their entirety in 289# gdb-xxx.tar.Z: 290TARDIRS = doc # tests 291 292# GDB "info" files, which should be included in their entirety 293INFOFILES = gdb.info* 294 295DEPFILES= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES} 296 297SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES) 298TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} 299TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ 300 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR} 301TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} 302 303OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ 304 values.o eval.o valops.o valarith.o valprint.o printcmd.o \ 305 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ 306 command.o utils.o expprint.o environ.o gdbtypes.o \ 307 copying.o $(DEPFILES) mem-break.o target.o \ 308 ieee-float.o putenv.o parse.o language.o $(YYOBJ) \ 309 buildsym.o objfiles.o minsyms.o maint.o demangle.o \ 310 $(SYMREADOBJ) core.o \ 311 $(LBL_OBJ) 312 313RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) 314 315TSOBS = inflow.o 316 317NTSOBS = standalone.o 318 319TSSTART = /lib/crt0.o 320 321NTSSTART = kdb-start.o 322 323SUBDIRS = doc 324 325# For now, shortcut the "configure GDB for fewer languages" stuff. 326YYFILES = c-exp.tab.c m2-exp.tab.c 327YYOBJ = c-exp.tab.o m2-exp.tab.o 328 329# Prevent Sun make from putting in the machine type. Setting 330# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. 331.c.o: 332 ${CC} -c ${INTERNAL_CFLAGS} $< 333 334all: gdb 335 $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 336check: 337info: force 338 $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 339install-info: force 340 $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 341clean-info: force 342 $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 343 344install.xgdb: xgdb 345 rm -f $(xbindir)/xgdb 346 install xgdb $(xbindir) 347 install Xgdb.ad $(xlibdir)/app-defaults/Xgdb 348 349gdb.z:gdb.1 350 nroff -man $(srcdir)/gdb.1 | col -b > gdb.t 351 pack gdb.t ; rm -f gdb.t 352 mv gdb.t.z gdb.z 353 354install: gdb 355 install -s gdb /usr/contrib/bin 356 357init.c: $(srcdir)/munch $(OBS) $(TSOBS) 358 $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c 359 360xinit.c: $(srcdir)/munch $(OBS) $(TSOBS) xgdb.o 361 rm -f xinit.c 362 ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) xgdb.o > xinit.c 363 364xgdb: $(OBS) $(TSOBS) xgdb.o xinit.o ${ADD_DEPS} 365 $(CC-LD) $(LDFLAGS) -o xgdb xinit.o xgdb.o \ 366 $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) \ 367 -lXaw -lXmu -lXt -lXext -lX11 -lXwchar -lX11 368 369gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o 370 ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \ 371 init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) 372 373saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c 374 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS 375 #load ./init.c $(SFILES) 376 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h 377 #unload ${srcdir}/nindy-share/[A-Z]* 378 #load c-exp.tab.c m2-exp.tab.c 379 #load copying.c version.c 380 #load ../opcodes/libopcodes.a 381 #load ../libiberty/libiberty.a 382 #load ../bfd/libbfd.a 383 #load ../readline/libreadline.a 384 #load ../mmalloc/libmmalloc.a 385 #load -ltermcap 386 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` 387 echo "Load .c corresponding to:" $(DEPFILES) 388 389 390# This is useful when debugging GDB, because some Unix's don't let you run GDB 391# on itself without copying the executable. So "make gdb1" will make 392# gdb and put a copy in gdb1, and you can run it with "gdb gdb1". 393# Removing gdb1 before the copy is the right thing if gdb1 is open 394# in another process. 395gdb1: gdb 396 rm -f gdb1 397 cp gdb gdb1 398 399# This is a remote stub which runs under unix and starts up an 400# inferior process. This is at least useful for debugging GDB's 401# remote support. 402rapp: $(RAPP_OBS) 403 rm -f rapp_init.c 404 ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c 405 ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) 406 407# Support for building Makefile out of configured pieces, automatically 408# generated dependencies, etc. alldeps.mak is a file that contains 409# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR, 410# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current 411# contents of the config subdirectory. 412 413alldeps.mak: ${srcdir}/config 414 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp 415 for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \ 416 echo $$i >>allconfig.tmp; \ 417 awk <$$i ' \ 418 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \ 419 || $$1 == "NATDEPFILES=" { \ 420 for (i = 2; i <= NF; i++) \ 421 print $$i >> "alldeps.tmp" ; \ 422 } \ 423 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE" { \ 424 print $$2 >> "allparam.tmp" }' ; \ 425 done 426 sort <alldeps.tmp | uniq | \ 427 sed -e 's/arm-convert.o/arm-convert.s/' \ 428 -e 's!^Onindy.o!nindy-share/Onindy.c!' \ 429 -e 's!^nindy.o!nindy-share/nindy.c!' \ 430 -e 's!ttybreak.o!nindy-share/ttybreak.c!' \ 431 -e 's!ttyflush.o!nindy-share/ttyflush.c!' \ 432 -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \ 433 -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \ 434 -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \ 435 -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \ 436 -e 's/\.o/.c/' \ 437 >alldeps2.tmp 438 echo '# Start of "alldeps.mak" definitions' \ 439 >>alldeps.mak; 440 echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \ 441 >>alldeps.mak; 442 grep -v / alldeps2.tmp | \ 443 awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ 444 NR == 0 {printf $$0;} \ 445 NR != 0 {printf "\\\n" $$0} \ 446 END {printf "\n\n"}' >>alldeps.mak; 447 grep / alldeps2.tmp | \ 448 awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ 449 NR == 0 {printf $$0;} \ 450 NR != 0 {printf "\\\n" $$0} \ 451 END {printf "\n\n"}' >>alldeps.mak; 452 sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \ 453 NR == 0 {printf $$0;} \ 454 NR != 0 {printf "\\\n" $$0} \ 455 END {printf "\n\n"}' >>alldeps.mak; 456 sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \ 457 NR == 0 {printf $$0;} \ 458 NR != 0 {printf "\\\n" $$0} \ 459 END {printf "\n\n"}' >>alldeps.mak; 460 echo '# End of "alldeps.mak" definitions' \ 461 >>alldeps.mak; 462 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp 463 464# The sed script makes everything which depends on {x,t}m.h depend on 465# config.status as well, in case someone reconfigures gdb out from 466# under an already compiled gdb. 467depend: $(SOURCES) Makefile.in 468 @echo Ignore errors about non-existent system-supplied include files 469 @echo for systems other than the one you are using. 470 @echo Also ignore parse errors in valops.c, and any errors in 471 @echo arm-convert.s. 472 touch xm.h tm.h 473 -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \ 474 -I${READLINE_DIR} $(INCLUDE_CFLAGS) \ 475 `ls $(SOURCES) | grep -v '\.[hy]$$' | \ 476 sort -u` >depend.tmp 477# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except 478# for xm.h and tm.h. This allows the same "depend" file to be used 479# by the various subdirectories. 480 if [ "${srcdir}" = "." ] ; then \ 481 <depend.tmp sed \ 482 -e 's; ./xm.h; xm.h;g' \ 483 -e 's; ./tm.h; tm.h;g' \ 484 -e 's; \./; $${srcdir}/;g' \ 485 -e 's; vx-share/; $${srcdir}/vx-share/;g' \ 486 -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \ 487 >depend.tm2; \ 488 rm depend.tmp; \ 489 mv depend.tm2 depend.tmp; \ 490 fi 491 <depend.tmp sed \ 492 -e 's; [xt]m.h;& config.status;g' \ 493 -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \ 494 -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \ 495 -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \ 496 -e 's; ./xm.h; xm.h config.status;g' \ 497 -e 's; ./tm.h; tm.h config.status;g' \ 498 >depend 499 rm depend.tmp 500 501config.status: 502 @echo "You must configure gdb. Look at the README file for details." 503 @false 504 505# This checks the configure.in file versus the config/ directory. 506config-check: config-check-hosts config-check-targets 507config-check-hosts: 508 grep gdb_host= ${srcdir}/configure.in | \ 509 sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o 510 (cd ${srcdir}/config; ls *.mh) >HOSTdir.o 511 diff -u HOSTconf.o HOSTdir.o 512 513config-check-targets: 514 grep gdb_target= ${srcdir}/configure.in | \ 515 sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o 516 (cd ${srcdir}/config; ls *.mt) >TARGdir.o 517 diff -u HOSTconf.o HOSTdir.o 518 519# These are not generated by "make depend" because they only are there 520# for some machines. 521# But these rules don't do what we want; we want to hack the foo.o: tm.h 522# dependency to do the right thing. 523tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h 524tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h 525xm-news1000.h: xm-news.h 526xm-i386-sv32.h: xm-i386.h 527tm-i386gas.h: tm-i386.h 528xm-sun4os4.h: xm-sparc.h 529tm-sun4os4.h: tm-sparc.h 530xm-vaxult.h: xm-vax.h 531xm-vaxbsd.h: xm-vax.h 532 533kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} 534 rm -f init.c 535 $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c 536 $(CC) $(LDFLAGS) -c init.c $(CLIBS) 537 ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ 538 -lc $(CLIBS) 539 540# Put the proper machine-specific files first. 541# createtags will edit the .o in DEPFILES into .c 542TAGS: ${TAGFILES} 543 $(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \ 544 $(DEPFILES) ${TAGFILES} 545tags: TAGS 546 547# Making distributions of GDB and friends. 548 549# Make a directory `proto-gdb.dir' that contains an image of the GDB 550# directory of the distribution, built up with symlinks. 551make-proto-gdb.dir: force_update 552 $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist 553 $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 554 555# Make a tar file containing the GDB directory of the distribution. 556gdb.tar.Z: force_update 557 $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist 558 $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z 559 560# Update the "alldeps.mak" file in a source directory. 561update-alldeps: force_update 562 ../configure none -norecursion 563 rm -f alldeps.mak 564 $(MAKE) $(MFLAGS) alldeps.mak 565 566# Update the "depend" and "alldeps.mak" files in a source directory. 567# We update alldeps.mak first, since it is used to generate the list 568# of files to be checked for dependencies. 569update-depend: update-alldeps force_update 570 ../configure none -norecursion 571 rm -f depend 572 $(MAKE) $(MFLAGS) depend 573 574# Set up the GDB source directory for distribution, by building all files that 575# are products of other files. 576setup-to-dist: update-depend force_update 577 ../configure none 578 (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4) 579 $(MAKE) $(MFLAGS) gdb.info 580 $(MAKE) $(MFLAGS) refcard.ps 581 582# Build a tar file from a proto-gdb.dir. 583gdb-$(VERSION).tar.Z: force_update 584 rm -f gdb.tar gdb-$(VERSION).tar.Z 585 $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 586 ln -s proto-gdb.dir $(DIST) 587 tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z 588 rm -rf $(DIST) proto-gdb.dir 589 590# Build a proto-gdb.dir after GDB has been set up for distribution. 591# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile 592# built in the setup-to-dist process, since it defines things like ALLCONFIG 593# and ALLDEPFILES, that we need. 594make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info 595 rm -rf proto-gdb.dir 596 mkdir proto-gdb.dir 597 cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done 598 cd proto-gdb.dir ; ln -s ../${INFOFILES} . 599 cd proto-gdb.dir ; for i in ${TARDIRS}; do \ 600 mkdir $$i; cd $$i; \ 601 ln -s ../../$$i/* .; \ 602 rm -rf SCCS CVS.adm RCS config.status; \ 603 if test -f Makefile.in; then rm Makefile; else true; fi; done 604 mkdir proto-gdb.dir/config 605 cd proto-gdb.dir/config ; \ 606 for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done 607 mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share 608 cd proto-gdb.dir/config ; \ 609 for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \ 610 do ln -s ../../$$i ../$$i ; done 611 chmod og=u `find . -print` 612 613clean: 614 rm -f *.o ${ADD_FILES} *~ 615 rm -f init.c version.c 616 rm -f gdb core gdb.tar gdb.tar.Z make.log 617 rm -f gdb[0-9] 618 rm -f xgdb.o xgdb 619 @$(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 620 621distclean: clean c-exp.tab.c m2-exp.tab.c TAGS 622 rm -f tm.h xm.h config.status 623 rm -f y.output yacc.acts yacc.tmp 624 rm -f ${TESTS} Makefile depend 625 @$(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 626 627realclean: clean 628 rm -f c-exp.tab.c m2-exp.tab.c TAGS 629 rm -f tm.h xm.h config.status 630 rm -f Makefile depend 631 @$(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) 632 633STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb 634 635subdir_do: force 636 @for i in $(DODIRS); do \ 637 if [ -d ./$$i ] ; then \ 638 if (cd ./$$i; \ 639 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ 640 else exit 1 ; fi ; \ 641 else true ; fi ; \ 642 done 643 644Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) 645 $(SHELL) ./config.status 646 647force: 648 649# Documentation! 650# GDB QUICK REFERENCE (TeX dvi file, CM fonts) 651refcard.dvi: $(srcdir)/doc/refcard.tex 652 ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) ) 653 mv ./doc/refcard.dvi . 654 655# GDB QUICK REFERENCE (PostScript output, common PS fonts) 656refcard.ps: $(srcdir)/doc/refcard.tex 657 ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) ) 658 mv ./doc/refcard.ps . 659 660# GDB MANUAL: TeX dvi file 661gdb.dvi: ./doc/gdb-all.texi 662 ( cd ./doc; $(MAKE) M4=$(M4) gdb.dvi $(FLAGS_TO_PASS) ) 663 mv ./doc/gdb.dvi . 664 665# GDB MANUAL: info file 666gdb.info: ./doc/gdb-all.texi 667 ( cd ./doc; $(MAKE) M4=$(M4) gdb.info $(FLAGS_TO_PASS) ) 668 mv ./doc/gdb.info* . 669 670./doc/gdb-all.texi: 671 (cd ./doc; $(MAKE) M4=$(M4) gdb-all.texi $(FLAGS_TO_PASS) ) 672 673# Make copying.c from COPYING 674copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk 675 awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c 676 677version.c: Makefile 678 echo 'char *version = "$(VERSION)";' >version.c 679 680# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist 681# in srcdir, then compiled in target dir to c-exp.tab.o. 682# Remove bogus decls for malloc/realloc/free which conflict with everything 683# else. 684c-exp.tab.o: c-exp.tab.c 685c-exp.tab.c: $(srcdir)/c-exp.y 686 @echo 'Expect 4 shift/reduce conflicts.' 687 ${YACC} $(srcdir)/c-exp.y 688 -sed -e '/extern.*malloc/d' \ 689 -e '/extern.*realloc/d' \ 690 -e '/extern.*free/d' \ 691 < y.tab.c > c-exp.tab.c 692 -rm y.tab.c 693 694# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist 695# in srcdir, then compiled in target dir to m2-exp.tab.o. 696m2-exp.tab.o: m2-exp.tab.c 697m2-exp.tab.c: $(srcdir)/m2-exp.y 698 ${YACC} $(srcdir)/m2-exp.y 699 -sed -e '/extern.*malloc/d' \ 700 -e '/extern.*realloc/d' \ 701 -e '/extern.*free/d' \ 702 < y.tab.c > m2-exp.tab.c 703 -rm y.tab.c 704 705xgdb.o: defs.h symtab.h frame.h 706 707main.o: ${srcdir}/main.c 708 ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $< 709 710# The symbol-file readers have dependencies on BFD header files. 711dbxread.o: ${srcdir}/dbxread.c 712 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c 713 714coffread.o: ${srcdir}/coffread.c 715 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c 716 717mipsread.o: ${srcdir}/mipsread.c 718 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c 719 720elfread.o: ${srcdir}/elfread.c 721 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c 722 723dwarfread.o: ${srcdir}/dwarfread.c 724 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c 725 726stabsread.o: ${srcdir}/stabsread.c 727 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c 728 729xcoffread.o: ${srcdir}/xcoffread.c 730 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c 731 732xcoffexec.o: ${srcdir}/xcoffexec.c 733 ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c 734 735# Drag in the files that are in another directory. 736 737xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c 738 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c 739 740xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c 741 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c 742 743xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c 744 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c 745 746xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c 747 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_regs.c 748 749nindy.o: ${srcdir}/nindy-share/nindy.c 750 ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \ 751 ${srcdir}/nindy-share/nindy.c 752 753Onindy.o: ${srcdir}/nindy-share/Onindy.c 754 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c 755 756ttybreak.o: ${srcdir}/nindy-share/ttybreak.c 757 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c 758 759ttyflush.o: ${srcdir}/nindy-share/ttyflush.c 760 ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c 761 762lint: $(LINTFILES) 763 $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ 764 `echo ${DEPFILES} | sed 's/\.o /\.c /g' 765 766gdb.cxref: $(SFILES) 767 cxref -I. $(SFILES) >gdb.cxref 768 769force_update: 770 771# GNU Make has an annoying habit of putting *all* the Makefile variables 772# into the environment, unless you include this target as a circumvention. 773# Rumor is that this will be fixed (and this target can be removed) 774# in GNU Make 4.0. 775.NOEXPORT: 776 777# This is the end of "Makefile.in". When built into "Makefile" 778# by the configure script, two things are added below this point: 779# alldeps.mak -- defintions of all files that are used in 780# host- or target-dependent configurations 781# depend -- what .o files depend on what .c and .h files, 782# for all configurations. 783 784 785