1 /* 2 * Copyright (c) 1986 MICOM-Interlan, Inc., Boxborough Mass. 3 * All rights reserved. The Berkeley software License Agreement 4 * specifies the terms and conditions for redistribution. 5 * 6 * @(#)npcmd.h 6.1 (Berkeley) 02/20/86 7 * @(#)NP Series Drivers npcmd.h 1.1 8 * 9 * Delta Created 9/19/85 Date Extracted 9/20/85 10 * File name ../../sccs/h/s.npcmd.h 11 */ 12 13 /* Note that the NPUNIT macro must match that defined in "npreg.h" */ 14 15 #define NPUNIT(a) ((minor(a) >> 4) & 0x0F) 16 17 #define NPRESET 0x01 /* reset the board */ 18 #define NPSTART 0x04 /* start board execution */ 19 #define NPGPANIC 0x05 /* Get panic message */ 20 #define NPINIT 0x06 /* initialize software on board */ 21 #define NPSTATS 0x07 22 #define NPRCSR0 0x08 /* read CSR0 */ 23 #define NPRCSR1 0x09 /* read CSR1 */ 24 #define NPRCSR2 0x0a /* read CSR2 */ 25 #define NPRCSR3 0x0b /* read CSR3 */ 26 #define NPWCSR0 0x0c /* write CSR0 */ 27 #define NPWCSR1 0x0d /* write CSR1 */ 28 #define NPWCSR2 0x0e /* write CSR2 */ 29 #define NPWCSR3 0x0f /* write CSR3 */ 30 #define NPPOLL 0x10 31 #define NPKILL 0x11 32 #define NPSETPROT 0x12 /* set the protocol to use */ 33 #define NPSETBOARD 0x13 /* set board to use */ 34 #define NPSETNPDEB 0x14 /* set nc debuging level */ 35 #define NPSETADDR 0x15 /* set host address */ 36 #define NPNETBOOT 0x16 /* boot from the network */ 37 38 /* ICP Board Requests */ 39 40 #define ICPLOAD 0x02 41 #define ICPDUMP 0x03 42 #define ICPPANIC 0x05 43 #define ICPPOLL 0x10 44