All rights reserved. The Berkeley software License Agreement
specifies the terms and conditions for redistribution.
@(#)css.4 6.1 (Berkeley) 05/15/85
"device css0 at uba0 csr 167600 flags 10 vector cssrint cssxint"
"css%d: can't initialize" . Insufficient UNIBUS resources existed to initialize the device. This is likely to occur when the device is run on a buffered data path on an 11/750 and other network interfaces are also configured to use buffered data paths, or when it is configured to use buffered data paths on an 11/730 (which has none).
"css%d: imp doesn't respond, icsr=%b" . The driver attempted to initialize the device, but the IMP failed to respond after 500 tries. Check the cabling.
"css%d: stray output interrupt csr=%b" . An interrupt occurred when no output had previously been started.
"css%d: output error, ocsr=%b icsr=%b" . The device indicated a problem sending data on output.
"css%d: recv error, csr=%b" . The device indicated a problem receiving data on input.
"css%d: bad length=%d" . An input operation resulted in a data transfer of less than 0 or more than 1008 bytes of data into memory (according to the word count register). This should never happen as the maximum size of a host-IMP message is 1008 bytes.