1# @(#)Makefile.hp300 8.2 (Berkeley) 01/23/94 2# 3# Makefile for 4.4 BSD 4# 5# This makefile is constructed from a machine description: 6# config machineid 7# Most changes should be made in the machine description 8# /sys/conf/``machineid'' 9# after which you should do 10# config machineid 11# Machine generic makefile changes should be made in 12# /sys/conf/Makefile.``machinetype'' 13# after which config should be rerun for all machines of that type. 14# 15# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE 16# IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING 17# 18# -DTRACE compile in kernel tracing hooks 19# -DQUOTA compile in file system quotas 20 21 22# DEBUG is set to -g by config if debugging is requested (config -g). 23# PROF is set to -pg by config if profiling is requested (config -p). 24AS= as ${DEBUG} 25CC= cc ${DEBUG} 26CPP= cpp 27LD= ld 28TOUCH= touch -f -c 29 30# source tree is located via $S relative to the compilation directory 31S= ../.. 32HP300= $S/hp300 33 34INCLUDES= -I. -I$S -I$S/sys 35COPTS= ${INCLUDES} ${IDENT} -DKERNEL -Dmc68020 -Dhp300 -DFPCOPROC 36CFLAGS= -O ${COPTS} 37 38# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP} 39# where TYPE is NORMAL, DRIVER, or PROFILE}; SUFFIX is the file suffix, 40# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file 41# is marked as config-dependent. 42 43NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $< 44NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< 45 46DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $< 47DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< 48 49PROFILE_C= ${CC} -S -c ${COPTS} $<; \ 50 sed -e s/_mcount/mcount/ -e s/subrmcount/subr_mcount/ <$*.s | \ 51 ${AS} -o $@; \ 52 rm -f $*.s 53 54NORMAL_S= ${CPP} ${COPTS} $< | ${AS} -o $@ 55NORMAL_S_C= ${CPP} ${COPTS} ${PARAM} $< | ${AS} -o $@ 56 57%OBJS 58 59%CFILES 60 61# load lines for config "xxx" will be emitted as: 62# xxx: ${SYSTEM_DEP} swapxxx.o 63# ${SYSTEM_LD_HEAD} 64# ${SYSTEM_LD} swapxxx.o 65# ${SYSTEM_LD_TAIL} 66SYSTEM_OBJ= locore.o ${OBJS} param.o ioconf.o vnode_if.o 67#SYSTEM_DEP= Makefile symbols.sort ${SYSTEM_OBJ} libkern.a 68SYSTEM_DEP= Makefile ${SYSTEM_OBJ} libkern.a 69SYSTEM_LD_HEAD= rm -f $@ 70SYSTEM_LD= -@if [ X${DEBUG} = X-g ]; \ 71 then strip=-X; \ 72 else strip=-x; \ 73 fi; \ 74 echo ${LD} $$strip -n -o $@ -e start '$${SYSTEM_OBJ}' vers.o libkern.a; \ 75 ${LD} $$strip -n -o $@ -e start ${SYSTEM_OBJ} vers.o libkern.a 76#SYSTEM_LD_TAIL= @echo rearranging symbols;\ 77# symorder symbols.sort $@;\ 78SYSTEM_LD_TAIL= @size $@; chmod 755 $@; \ 79 [ X${DEBUG} = X-g ] && { \ 80 echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \ 81 echo strip -d $@; strip -d $@; } || true 82 83%LOAD 84 85libkern.a: 86 -@if [ X${PROF} = X ]; \ 87 then ln -s $S/libkern/obj/libkern.a libkern.a; \ 88 else ln -s $S/libkern/obj/libkern_p.a libkern.a; \ 89 fi; \ 90 echo ln -s $S/libkern/obj/libkern.a libkern.a 91 92newvers: 93 sh $S/conf/newvers.sh 94 ${CC} $(CFLAGS) -c vers.c 95 96clean: 97 rm -f eddep *vmunix vmunix.gdb tags *.o locore.i [a-z]*.s \ 98 Errs errs linterrs makelinks 99 100lint: /tmp param.c 101 @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \ 102 ${HP300}/hp300/Locore.c ${CFILES} ${HP300}/hp300/swapgeneric.c \ 103 ioconf.c param.c| \ 104 grep -v 'struct/union .* never defined' | \ 105 grep -v 'possible pointer alignment problem' 106 107symbols.sort: ${HP300}/hp300/symbols.raw 108 grep -v '^#' ${HP300}/hp300/symbols.raw \ 109 | sed 's/^ //' | sort -u > symbols.sort 110 111locore.o: assym.s ${HP300}/hp300/vectors.s ${HP300}/hp300/locore.s 112locore.o: ${HP300}/include/trap.h ${HP300}/include/psl.h ${HP300}/hp300/pte.h 113locore.o: ${HP300}/include/cpu.h 114 ${CPP} -DLOCORE ${COPTS} ${HP300}/hp300/locore.s | ${AS} -o locore.o 115 116# the following is necessary because autoconf.o depends on #if GENERIC 117autoconf.o: Makefile 118 119# the following are necessary because the files depend on the types of 120# hp cpu's included in the system configuration 121machdep.o sys_machdep.o pmap.o pmap_bootstrap.o trap.o dma.o: Makefile 122 123# depend on network or filesystem configuration 124uipc_proto.o vfs_conf.o locore.o: Makefile 125 126# depend on maxusers 127assym.s: Makefile 128 129assym.s: genassym 130 ./genassym >assym.s 131 132genassym: 133 ${CC} ${INCLUDES} ${IDENT} ${PARAM} -Dmc68020 -Dhp300 -o genassym \ 134 ${HP300}/hp300/genassym.c 135 136depend: assym.s param.c vnode_if.h 137 mkdep ${COPTS} ${CFILES} ioconf.c param.c 138 mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${HP300}/hp300/genassym.c 139 140links: 141 egrep '#if' ${CFILES} | sed -f $S/conf/defines | \ 142 sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink 143 echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \ 144 sort -u | comm -23 - dontlink | \ 145 sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks 146 sh makelinks && rm -f dontlink 147 148tags: 149 @echo "see $S/kern/Makefile for tags" 150 151ioconf.o: ioconf.c 152 ${CC} -c ${CFLAGS} ioconf.c 153 154param.c: $S/conf/param.c 155 rm -f param.c 156 cp $S/conf/param.c . 157 158param.o: param.c Makefile 159 ${CC} -c ${CFLAGS} ${PARAM} param.c 160 161vnode_if.c: $S/kern/vnode_if.sh $S/kern/vnode_if.src 162 sh $S/kern/vnode_if.sh $S/kern/vnode_if.src 163vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src 164 sh $S/kern/vnode_if.sh $S/kern/vnode_if.src 165 166%RULES 167