xref: /original-bsd/sys/hp300/stand/ite_dv.c (revision 7c3db03c)
1 /*
2  * Copyright (c) 1988 University of Utah.
3  * Copyright (c) 1990 The Regents of the University of California.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to Berkeley by
7  * the Systems Programming Group of the University of Utah Computer
8  * Science Department.
9  *
10  * %sccs.include.redist.c%
11  *
12  * from: Utah $Hdr: ite_dv.c 1.1 89/02/28$
13  *
14  *	@(#)ite_dv.c	7.2 (Berkeley) 12/16/90
15  */
16 
17 #include "samachdep.h"
18 
19 #ifdef ITECONSOLE
20 
21 #include "sys/param.h"
22 #include "../dev/itevar.h"
23 #include "../dev/itereg.h"
24 #include "../dev/grfvar.h"
25 #include "../dev/grf_dvreg.h"
26 
27 #define REGBASE		((struct dvboxfb *)(ip->regbase))
28 #define WINDOWMOVER	dvbox_windowmove
29 
30 dvbox_init(ip)
31 	struct ite_softc *ip;
32 {
33 	int i;
34 
35 	dv_reset(REGADDR);
36 	DELAY(4000);
37 
38 	/*
39 	 * Turn on frame buffer, turn on overlay planes, set replacement
40 	 * rule, enable top overlay plane writes for ite, disable all frame
41 	 * buffer planes, set byte per pixel, and display frame buffer 0.
42 	 * Lastly, turn on the box.
43 	 */
44 	REGBASE->interrupt = 0x04;
45 	REGBASE->drive     = 0x10;
46  	REGBASE->rep_rule  = RR_COPY << 4 | RR_COPY;
47 	REGBASE->opwen     = 0x01;
48 	REGBASE->fbwen     = 0x0;
49 	REGBASE->fold      = 0x01;
50 	REGBASE->vdrive    = 0x0;
51 	REGBASE->dispen    = 0x01;
52 
53 	/*
54 	 * Video enable top overlay plane.
55 	 */
56 	REGBASE->opvenp = 0x01;
57 	REGBASE->opvens = 0x01;
58 
59 	/*
60 	 * Make sure that overlay planes override frame buffer planes.
61 	 */
62 	REGBASE->ovly0p  = 0x0;
63 	REGBASE->ovly0s  = 0x0;
64 	REGBASE->ovly1p  = 0x0;
65 	REGBASE->ovly1s  = 0x0;
66 	REGBASE->fv_trig = 0x1;
67 	DELAY(400);
68 
69 	/*
70 	 * Setup the overlay colormaps. Need to set the 0,1 (black/white)
71 	 * color for both banks.
72 	 */
73 
74 	for (i = 0; i <= 1; i++) {
75 		REGBASE->cmapbank = i;
76 		REGBASE->rgb[0].red   = 0x00;
77 		REGBASE->rgb[0].green = 0x00;
78 		REGBASE->rgb[0].blue  = 0x00;
79 		REGBASE->rgb[1].red   = 0xFF;
80 		REGBASE->rgb[1].green = 0xFF;
81 		REGBASE->rgb[1].blue  = 0xFF;
82 	}
83 	REGBASE->cmapbank = 0;
84 
85 	db_waitbusy(REGADDR);
86 
87 	ite_devinfo(ip);
88 	ite_fontinit(ip);
89 
90 	/*
91 	 * Clear the (visible) framebuffer.
92 	 */
93 	dvbox_windowmove(ip, 0, 0, 0, 0, ip->dheight, ip->dwidth, RR_CLEAR);
94 	db_waitbusy(REGADDR);
95 
96 	/*
97 	 * Stash the inverted cursor.
98 	 */
99 	dvbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '),
100 			 ip->cblanky, ip->cblankx, ip->ftheight,
101 			 ip->ftwidth, RR_COPYINVERTED);
102 	db_waitbusy(REGADDR);
103 }
104 
105 dvbox_putc(ip, c, dy, dx, mode)
106 	register struct ite_softc *ip;
107         register int dy, dx;
108 	int c, mode;
109 {
110 	dvbox_windowmove(ip, charY(ip, c), charX(ip, c),
111 			 dy * ip->ftheight, dx * ip->ftwidth,
112 			 ip->ftheight, ip->ftwidth, RR_COPY);
113 }
114 
115 dvbox_cursor(ip, flag)
116 	register struct ite_softc *ip;
117         register int flag;
118 {
119 	if (flag == DRAW_CURSOR)
120 		draw_cursor(ip)
121 	else if (flag == MOVE_CURSOR) {
122 		erase_cursor(ip)
123 		draw_cursor(ip)
124 	}
125 	else
126 		erase_cursor(ip)
127 }
128 
129 dvbox_clear(ip, sy, sx, h, w)
130 	struct ite_softc *ip;
131 	register int sy, sx, h, w;
132 {
133 	dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
134 			 sy * ip->ftheight, sx * ip->ftwidth,
135 			 h  * ip->ftheight, w  * ip->ftwidth,
136 			 RR_CLEAR);
137 }
138 
139 dvbox_scroll(ip, sy, sx, count, dir)
140         register struct ite_softc *ip;
141         register int sy, count;
142         int dir, sx;
143 {
144 	register int dy = sy - count;
145 	register int height = ip->rows - sy;
146 
147 	dvbox_cursor(ip, ERASE_CURSOR);
148 
149 	dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
150 			 dy * ip->ftheight, sx * ip->ftwidth,
151 			 height * ip->ftheight,
152 			 ip->cols * ip->ftwidth, RR_COPY);
153 }
154 
155 dvbox_windowmove(ip, sy, sx, dy, dx, h, w, func)
156 	struct ite_softc *ip;
157 	int sy, sx, dy, dx, h, w, func;
158 {
159 	register struct dvboxfb *dp = REGBASE;
160 	if (h == 0 || w == 0)
161 		return;
162 
163 	db_waitbusy(REGADDR);
164 	dp->rep_rule = func << 4 | func;
165 	dp->source_y = sy;
166 	dp->source_x = sx;
167 	dp->dest_y   = dy;
168 	dp->dest_x   = dx;
169 	dp->wheight  = h;
170 	dp->wwidth   = w;
171 	dp->wmove    = 1;
172 }
173 
174 dv_reset(dbp)
175 	register struct dvboxfb *dbp;
176 {
177   	dbp->reset = 0x80;
178 	DELAY(400);
179 
180 	dbp->interrupt = 0x04;
181 	dbp->en_scan   = 0x01;
182 	dbp->fbwen     = ~0;
183 	dbp->opwen     = ~0;
184 	dbp->fold      = 0x01;
185 	dbp->drive     = 0x01;
186 	dbp->rep_rule  = 0x33;
187 	dbp->alt_rr    = 0x33;
188 	dbp->zrr       = 0x33;
189 
190 	dbp->fbvenp    = 0xFF;
191 	dbp->dispen    = 0x01;
192 	dbp->fbvens    = 0x0;
193 	dbp->fv_trig   = 0x01;
194 	DELAY(400);
195 	dbp->vdrive    = 0x0;
196 	dbp->zconfig   = 0x0;
197 
198 	while (dbp->wbusy & 0x01)
199 	  DELAY(400);
200 
201 	/*
202 	 * Start of missing ROM code.
203 	 */
204 	dbp->cmapbank = 0;
205 
206 	dbp->red0   = 0;
207 	dbp->red1   = 0;
208 	dbp->green0 = 0;
209 	dbp->green1 = 0;
210 	dbp->blue0  = 0;
211 	dbp->blue1  = 0;
212 
213 	dbp->panxh   = 0;
214 	dbp->panxl   = 0;
215 	dbp->panyh   = 0;
216 	dbp->panyl   = 0;
217 	dbp->zoom    = 0;
218 	dbp->cdwidth = 0x50;
219 	dbp->chstart = 0x52;
220 	dbp->cvwidth = 0x22;
221 	dbp->pz_trig = 1;
222 	/*
223 	 * End of missing ROM code.
224 	 */
225 }
226 
227 #endif
228