1 /* 2 * Copyright (c) 1988 University of Utah. 3 * Copyright (c) 1992 The Regents of the University of California. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * the Systems Programming Group of the University of Utah Computer 8 * Science Department and Ralph Campbell. 9 * 10 * %sccs.include.redist.c% 11 * 12 * from: Utah $Hdr: trap.c 1.32 91/04/06$ 13 * 14 * @(#)trap.c 7.18 (Berkeley) 05/24/93 15 */ 16 17 #include <sys/param.h> 18 #include <sys/systm.h> 19 #include <sys/proc.h> 20 #include <sys/kernel.h> 21 #include <sys/signalvar.h> 22 #include <sys/syscall.h> 23 #include <sys/user.h> 24 #include <sys/buf.h> 25 #ifdef KTRACE 26 #include <sys/ktrace.h> 27 #endif 28 #include <net/netisr.h> 29 30 #include <machine/trap.h> 31 #include <machine/psl.h> 32 #include <machine/reg.h> 33 #include <machine/cpu.h> 34 #include <machine/pte.h> 35 #include <machine/mips_opcode.h> 36 37 #include <vm/vm.h> 38 #include <vm/vm_kern.h> 39 #include <vm/vm_page.h> 40 41 #include <pmax/pmax/clockreg.h> 42 #include <pmax/pmax/kn01.h> 43 #include <pmax/pmax/kn02.h> 44 #include <pmax/pmax/kmin.h> 45 #include <pmax/pmax/maxine.h> 46 #include <pmax/pmax/kn03.h> 47 #include <pmax/pmax/asic.h> 48 #include <pmax/pmax/turbochannel.h> 49 50 #include <pmax/stand/dec_prom.h> 51 52 #include <asc.h> 53 #include <sii.h> 54 #include <le.h> 55 #include <dc.h> 56 57 struct proc *machFPCurProcPtr; /* pointer to last proc to use FP */ 58 59 extern void MachKernGenException(); 60 extern void MachUserGenException(); 61 extern void MachKernIntr(); 62 extern void MachUserIntr(); 63 extern void MachTLBModException(); 64 extern void MachTLBMissException(); 65 extern unsigned MachEmulateBranch(); 66 67 void (*machExceptionTable[])() = { 68 /* 69 * The kernel exception handlers. 70 */ 71 MachKernIntr, /* external interrupt */ 72 MachKernGenException, /* TLB modification */ 73 MachTLBMissException, /* TLB miss (load or instr. fetch) */ 74 MachTLBMissException, /* TLB miss (store) */ 75 MachKernGenException, /* address error (load or I-fetch) */ 76 MachKernGenException, /* address error (store) */ 77 MachKernGenException, /* bus error (I-fetch) */ 78 MachKernGenException, /* bus error (load or store) */ 79 MachKernGenException, /* system call */ 80 MachKernGenException, /* breakpoint */ 81 MachKernGenException, /* reserved instruction */ 82 MachKernGenException, /* coprocessor unusable */ 83 MachKernGenException, /* arithmetic overflow */ 84 MachKernGenException, /* reserved */ 85 MachKernGenException, /* reserved */ 86 MachKernGenException, /* reserved */ 87 /* 88 * The user exception handlers. 89 */ 90 MachUserIntr, 91 MachUserGenException, 92 MachUserGenException, 93 MachUserGenException, 94 MachUserGenException, 95 MachUserGenException, 96 MachUserGenException, 97 MachUserGenException, 98 MachUserGenException, 99 MachUserGenException, 100 MachUserGenException, 101 MachUserGenException, 102 MachUserGenException, 103 MachUserGenException, 104 MachUserGenException, 105 MachUserGenException, 106 }; 107 108 char *trap_type[] = { 109 "external interrupt", 110 "TLB modification", 111 "TLB miss (load or instr. fetch)", 112 "TLB miss (store)", 113 "address error (load or I-fetch)", 114 "address error (store)", 115 "bus error (I-fetch)", 116 "bus error (load or store)", 117 "system call", 118 "breakpoint", 119 "reserved instruction", 120 "coprocessor unusable", 121 "arithmetic overflow", 122 "reserved 13", 123 "reserved 14", 124 "reserved 15", 125 }; 126 127 #ifdef DEBUG 128 #define TRAPSIZE 10 129 struct trapdebug { /* trap history buffer for debugging */ 130 u_int status; 131 u_int cause; 132 u_int vadr; 133 u_int pc; 134 u_int ra; 135 u_int code; 136 } trapdebug[TRAPSIZE], *trp = trapdebug; 137 #endif 138 139 static void pmax_errintr(); 140 static void kn02_errintr(), kn02ba_errintr(); 141 #ifdef DS5000_240 142 static void kn03_errintr(); 143 #endif 144 static unsigned kn02ba_recover_erradr(); 145 extern tc_option_t tc_slot_info[TC_MAX_LOGICAL_SLOTS]; 146 extern u_long kmin_tc3_imask, xine_tc3_imask; 147 extern const struct callback *callv; 148 #ifdef DS5000_240 149 extern u_long kn03_tc3_imask; 150 #endif 151 int (*pmax_hardware_intr)() = (int (*)())0; 152 extern volatile struct chiptime *Mach_clock_addr; 153 154 /* 155 * Handle an exception. 156 * Called from MachKernGenException() or MachUserGenException() 157 * when a processor trap occurs. 158 * In the case of a kernel trap, we return the pc where to resume if 159 * ((struct pcb *)UADDR)->pcb_onfault is set, otherwise, return old pc. 160 */ 161 unsigned 162 trap(statusReg, causeReg, vadr, pc, args) 163 unsigned statusReg; /* status register at time of the exception */ 164 unsigned causeReg; /* cause register at time of exception */ 165 unsigned vadr; /* address (if any) the fault occured on */ 166 unsigned pc; /* program counter where to continue */ 167 { 168 register int type, i; 169 unsigned ucode = 0; 170 register struct proc *p = curproc; 171 u_quad_t sticks; 172 vm_prot_t ftype; 173 extern unsigned onfault_table[]; 174 175 #ifdef DEBUG 176 trp->status = statusReg; 177 trp->cause = causeReg; 178 trp->vadr = vadr; 179 trp->pc = pc; 180 trp->ra = !USERMODE(statusReg) ? ((int *)&args)[19] : 181 p->p_md.md_regs[RA]; 182 trp->code = 0; 183 if (++trp == &trapdebug[TRAPSIZE]) 184 trp = trapdebug; 185 #endif 186 187 cnt.v_trap++; 188 type = (causeReg & MACH_CR_EXC_CODE) >> MACH_CR_EXC_CODE_SHIFT; 189 if (USERMODE(statusReg)) { 190 type |= T_USER; 191 sticks = p->p_sticks; 192 } 193 194 /* 195 * Enable hardware interrupts if they were on before. 196 * We only respond to software interrupts when returning to user mode. 197 */ 198 if (statusReg & MACH_SR_INT_ENA_PREV) 199 splx((statusReg & MACH_HARD_INT_MASK) | MACH_SR_INT_ENA_CUR); 200 201 switch (type) { 202 case T_TLB_MOD: 203 /* check for kernel address */ 204 if ((int)vadr < 0) { 205 register pt_entry_t *pte; 206 register unsigned entry; 207 register vm_offset_t pa; 208 209 pte = kvtopte(vadr); 210 entry = pte->pt_entry; 211 #ifdef DIAGNOSTIC 212 if (!(entry & PG_V) || (entry & PG_M)) 213 panic("trap: ktlbmod: invalid pte"); 214 #endif 215 if (entry & PG_RO) { 216 /* write to read only page in the kernel */ 217 ftype = VM_PROT_WRITE; 218 goto kernel_fault; 219 } 220 entry |= PG_M; 221 pte->pt_entry = entry; 222 vadr &= ~PGOFSET; 223 MachTLBUpdate(vadr, entry); 224 pa = entry & PG_FRAME; 225 #ifdef ATTR 226 pmap_attributes[atop(pa)] |= PMAP_ATTR_MOD; 227 #else 228 if (!IS_VM_PHYSADDR(pa)) 229 panic("trap: ktlbmod: unmanaged page"); 230 PHYS_TO_VM_PAGE(pa)->flags &= ~PG_CLEAN; 231 #endif 232 return (pc); 233 } 234 /* FALLTHROUGH */ 235 236 case T_TLB_MOD+T_USER: 237 { 238 register pt_entry_t *pte; 239 register unsigned entry; 240 register vm_offset_t pa; 241 pmap_t pmap = &p->p_vmspace->vm_pmap; 242 243 if (!(pte = pmap_segmap(pmap, vadr))) 244 panic("trap: utlbmod: invalid segmap"); 245 pte += (vadr >> PGSHIFT) & (NPTEPG - 1); 246 entry = pte->pt_entry; 247 #ifdef DIAGNOSTIC 248 if (!(entry & PG_V) || (entry & PG_M)) 249 panic("trap: utlbmod: invalid pte"); 250 #endif 251 if (entry & PG_RO) { 252 /* write to read only page */ 253 ftype = VM_PROT_WRITE; 254 goto dofault; 255 } 256 entry |= PG_M; 257 pte->pt_entry = entry; 258 vadr = (vadr & ~PGOFSET) | 259 (pmap->pm_tlbpid << VMMACH_TLB_PID_SHIFT); 260 MachTLBUpdate(vadr, entry); 261 pa = entry & PG_FRAME; 262 #ifdef ATTR 263 pmap_attributes[atop(pa)] |= PMAP_ATTR_MOD; 264 #else 265 if (!IS_VM_PHYSADDR(pa)) 266 panic("trap: utlbmod: unmanaged page"); 267 PHYS_TO_VM_PAGE(pa)->flags &= ~PG_CLEAN; 268 #endif 269 if (!USERMODE(statusReg)) 270 return (pc); 271 goto out; 272 } 273 274 case T_TLB_LD_MISS: 275 case T_TLB_ST_MISS: 276 ftype = (type == T_TLB_ST_MISS) ? VM_PROT_WRITE : VM_PROT_READ; 277 /* check for kernel address */ 278 if ((int)vadr < 0) { 279 register vm_offset_t va; 280 int rv; 281 282 kernel_fault: 283 va = trunc_page((vm_offset_t)vadr); 284 rv = vm_fault(kernel_map, va, ftype, FALSE); 285 if (rv == KERN_SUCCESS) 286 return (pc); 287 if (i = ((struct pcb *)UADDR)->pcb_onfault) { 288 ((struct pcb *)UADDR)->pcb_onfault = 0; 289 return (onfault_table[i]); 290 } 291 goto err; 292 } 293 /* 294 * It is an error for the kernel to access user space except 295 * through the copyin/copyout routines. 296 */ 297 if ((i = ((struct pcb *)UADDR)->pcb_onfault) == 0) 298 goto err; 299 /* check for fuswintr() or suswintr() getting a page fault */ 300 if (i == 4) 301 return (onfault_table[i]); 302 goto dofault; 303 304 case T_TLB_LD_MISS+T_USER: 305 ftype = VM_PROT_READ; 306 goto dofault; 307 308 case T_TLB_ST_MISS+T_USER: 309 ftype = VM_PROT_WRITE; 310 dofault: 311 { 312 register vm_offset_t va; 313 register struct vmspace *vm; 314 register vm_map_t map; 315 int rv; 316 317 vm = p->p_vmspace; 318 map = &vm->vm_map; 319 va = trunc_page((vm_offset_t)vadr); 320 rv = vm_fault(map, va, ftype, FALSE); 321 /* 322 * If this was a stack access we keep track of the maximum 323 * accessed stack size. Also, if vm_fault gets a protection 324 * failure it is due to accessing the stack region outside 325 * the current limit and we need to reflect that as an access 326 * error. 327 */ 328 if ((caddr_t)va >= vm->vm_maxsaddr) { 329 if (rv == KERN_SUCCESS) { 330 unsigned nss; 331 332 nss = clrnd(btoc(USRSTACK-(unsigned)va)); 333 if (nss > vm->vm_ssize) 334 vm->vm_ssize = nss; 335 } else if (rv == KERN_PROTECTION_FAILURE) 336 rv = KERN_INVALID_ADDRESS; 337 } 338 if (rv == KERN_SUCCESS) { 339 if (!USERMODE(statusReg)) 340 return (pc); 341 goto out; 342 } 343 if (!USERMODE(statusReg)) { 344 if (i = ((struct pcb *)UADDR)->pcb_onfault) { 345 ((struct pcb *)UADDR)->pcb_onfault = 0; 346 return (onfault_table[i]); 347 } 348 goto err; 349 } 350 ucode = vadr; 351 i = (rv == KERN_PROTECTION_FAILURE) ? SIGBUS : SIGSEGV; 352 break; 353 } 354 355 case T_ADDR_ERR_LD+T_USER: /* misaligned or kseg access */ 356 case T_ADDR_ERR_ST+T_USER: /* misaligned or kseg access */ 357 case T_BUS_ERR_IFETCH+T_USER: /* BERR asserted to cpu */ 358 case T_BUS_ERR_LD_ST+T_USER: /* BERR asserted to cpu */ 359 i = SIGSEGV; 360 break; 361 362 case T_SYSCALL+T_USER: 363 { 364 register int *locr0 = p->p_md.md_regs; 365 register struct sysent *callp; 366 unsigned int code; 367 int numsys; 368 struct args { 369 int i[8]; 370 } args; 371 int rval[2]; 372 struct sysent *systab; 373 extern int nsysent; 374 #ifdef ULTRIXCOMPAT 375 extern struct sysent ultrixsysent[]; 376 extern int ultrixnsysent; 377 #endif 378 379 cnt.v_syscall++; 380 /* compute next PC after syscall instruction */ 381 if ((int)causeReg < 0) 382 locr0[PC] = MachEmulateBranch(locr0, pc, 0, 0); 383 else 384 locr0[PC] += 4; 385 systab = sysent; 386 numsys = nsysent; 387 #ifdef ULTRIXCOMPAT 388 if (p->p_md.md_flags & MDP_ULTRIX) { 389 systab = ultrixsysent; 390 numsys = ultrixnsysent; 391 } 392 #endif 393 code = locr0[V0]; 394 switch (code) { 395 case SYS_indir: 396 /* 397 * Code is first argument, followed by actual args. 398 */ 399 code = locr0[A0]; 400 if (code >= numsys) 401 callp = &systab[SYS_indir]; /* (illegal) */ 402 else 403 callp = &systab[code]; 404 i = callp->sy_narg; 405 args.i[0] = locr0[A1]; 406 args.i[1] = locr0[A2]; 407 args.i[2] = locr0[A3]; 408 if (i > 3) { 409 i = copyin((caddr_t)(locr0[SP] + 410 4 * sizeof(int)), 411 (caddr_t)&args.i[3], 412 (u_int)(i - 3) * sizeof(int)); 413 if (i) { 414 locr0[V0] = i; 415 locr0[A3] = 1; 416 #ifdef KTRACE 417 if (KTRPOINT(p, KTR_SYSCALL)) 418 ktrsyscall(p->p_tracep, code, 419 callp->sy_narg, args.i); 420 #endif 421 goto done; 422 } 423 } 424 break; 425 426 case SYS___indir: 427 /* 428 * Like indir, but code is a quad, so as to maintain 429 * quad alignment for the rest of the arguments. 430 */ 431 code = locr0[A0 + _QUAD_LOWWORD]; 432 if (code >= numsys) 433 callp = &systab[SYS_indir]; /* (illegal) */ 434 else 435 callp = &systab[code]; 436 i = callp->sy_narg; 437 args.i[0] = locr0[A2]; 438 args.i[1] = locr0[A3]; 439 if (i > 2) { 440 i = copyin((caddr_t)(locr0[SP] + 441 4 * sizeof(int)), 442 (caddr_t)&args.i[2], 443 (u_int)(i - 2) * sizeof(int)); 444 if (i) { 445 locr0[V0] = i; 446 locr0[A3] = 1; 447 #ifdef KTRACE 448 if (KTRPOINT(p, KTR_SYSCALL)) 449 ktrsyscall(p->p_tracep, code, 450 callp->sy_narg, args.i); 451 #endif 452 goto done; 453 } 454 } 455 break; 456 457 default: 458 if (code >= numsys) 459 callp = &systab[SYS_indir]; /* (illegal) */ 460 else 461 callp = &systab[code]; 462 i = callp->sy_narg; 463 args.i[0] = locr0[A0]; 464 args.i[1] = locr0[A1]; 465 args.i[2] = locr0[A2]; 466 args.i[3] = locr0[A3]; 467 if (i > 4) { 468 i = copyin((caddr_t)(locr0[SP] + 469 4 * sizeof(int)), 470 (caddr_t)&args.i[4], 471 (u_int)(i - 4) * sizeof(int)); 472 if (i) { 473 locr0[V0] = i; 474 locr0[A3] = 1; 475 #ifdef KTRACE 476 if (KTRPOINT(p, KTR_SYSCALL)) 477 ktrsyscall(p->p_tracep, code, 478 callp->sy_narg, args.i); 479 #endif 480 goto done; 481 } 482 } 483 } 484 #ifdef KTRACE 485 if (KTRPOINT(p, KTR_SYSCALL)) 486 ktrsyscall(p->p_tracep, code, callp->sy_narg, args.i); 487 #endif 488 rval[0] = 0; 489 rval[1] = locr0[V1]; 490 #ifdef DEBUG 491 if (trp == trapdebug) 492 trapdebug[TRAPSIZE - 1].code = code; 493 else 494 trp[-1].code = code; 495 #endif 496 i = (*callp->sy_call)(p, &args, rval); 497 /* 498 * Reinitialize proc pointer `p' as it may be different 499 * if this is a child returning from fork syscall. 500 */ 501 p = curproc; 502 locr0 = p->p_md.md_regs; 503 #ifdef DEBUG 504 { int s; 505 s = splhigh(); 506 trp->status = statusReg; 507 trp->cause = causeReg; 508 trp->vadr = locr0[SP]; 509 trp->pc = locr0[PC]; 510 trp->ra = locr0[RA]; 511 trp->code = -code; 512 if (++trp == &trapdebug[TRAPSIZE]) 513 trp = trapdebug; 514 splx(s); 515 } 516 #endif 517 switch (i) { 518 case 0: 519 locr0[V0] = rval[0]; 520 locr0[V1] = rval[1]; 521 locr0[A3] = 0; 522 break; 523 524 case ERESTART: 525 locr0[PC] = pc; 526 break; 527 528 case EJUSTRETURN: 529 break; /* nothing to do */ 530 531 default: 532 locr0[V0] = i; 533 locr0[A3] = 1; 534 } 535 done: 536 #ifdef KTRACE 537 if (KTRPOINT(p, KTR_SYSRET)) 538 ktrsysret(p->p_tracep, code, i, rval[0]); 539 #endif 540 goto out; 541 } 542 543 case T_BREAK+T_USER: 544 { 545 register unsigned va, instr; 546 547 /* compute address of break instruction */ 548 va = pc; 549 if ((int)causeReg < 0) 550 va += 4; 551 552 /* read break instruction */ 553 instr = fuiword((caddr_t)va); 554 #ifdef KADB 555 if (instr == MACH_BREAK_BRKPT || instr == MACH_BREAK_SSTEP) 556 goto err; 557 #endif 558 if (p->p_md.md_ss_addr != va || instr != MACH_BREAK_SSTEP) { 559 i = SIGTRAP; 560 break; 561 } 562 563 /* restore original instruction and clear BP */ 564 i = suiword((caddr_t)va, p->p_md.md_ss_instr); 565 if (i < 0) { 566 vm_offset_t sa, ea; 567 int rv; 568 569 sa = trunc_page((vm_offset_t)va); 570 ea = round_page((vm_offset_t)va+sizeof(int)-1); 571 rv = vm_map_protect(&p->p_vmspace->vm_map, sa, ea, 572 VM_PROT_DEFAULT, FALSE); 573 if (rv == KERN_SUCCESS) { 574 i = suiword((caddr_t)va, p->p_md.md_ss_instr); 575 (void) vm_map_protect(&p->p_vmspace->vm_map, 576 sa, ea, VM_PROT_READ|VM_PROT_EXECUTE, 577 FALSE); 578 } 579 } 580 if (i < 0) { 581 i = SIGTRAP; 582 break; 583 } 584 p->p_md.md_ss_addr = 0; 585 goto out; 586 } 587 588 case T_RES_INST+T_USER: 589 i = SIGILL; 590 break; 591 592 case T_COP_UNUSABLE+T_USER: 593 if ((causeReg & MACH_CR_COP_ERR) != 0x10000000) { 594 i = SIGILL; /* only FPU instructions allowed */ 595 break; 596 } 597 MachSwitchFPState(machFPCurProcPtr, p->p_md.md_regs); 598 machFPCurProcPtr = p; 599 p->p_md.md_regs[PS] |= MACH_SR_COP_1_BIT; 600 p->p_md.md_flags |= MDP_FPUSED; 601 goto out; 602 603 case T_OVFLOW+T_USER: 604 i = SIGFPE; 605 break; 606 607 case T_ADDR_ERR_LD: /* misaligned access */ 608 case T_ADDR_ERR_ST: /* misaligned access */ 609 case T_BUS_ERR_LD_ST: /* BERR asserted to cpu */ 610 if (i = ((struct pcb *)UADDR)->pcb_onfault) { 611 ((struct pcb *)UADDR)->pcb_onfault = 0; 612 return (onfault_table[i]); 613 } 614 /* FALLTHROUGH */ 615 616 default: 617 err: 618 #ifdef KADB 619 { 620 extern struct pcb kdbpcb; 621 622 if (USERMODE(statusReg)) 623 kdbpcb = p->p_addr->u_pcb; 624 else { 625 kdbpcb.pcb_regs[ZERO] = 0; 626 kdbpcb.pcb_regs[AST] = ((int *)&args)[2]; 627 kdbpcb.pcb_regs[V0] = ((int *)&args)[3]; 628 kdbpcb.pcb_regs[V1] = ((int *)&args)[4]; 629 kdbpcb.pcb_regs[A0] = ((int *)&args)[5]; 630 kdbpcb.pcb_regs[A1] = ((int *)&args)[6]; 631 kdbpcb.pcb_regs[A2] = ((int *)&args)[7]; 632 kdbpcb.pcb_regs[A3] = ((int *)&args)[8]; 633 kdbpcb.pcb_regs[T0] = ((int *)&args)[9]; 634 kdbpcb.pcb_regs[T1] = ((int *)&args)[10]; 635 kdbpcb.pcb_regs[T2] = ((int *)&args)[11]; 636 kdbpcb.pcb_regs[T3] = ((int *)&args)[12]; 637 kdbpcb.pcb_regs[T4] = ((int *)&args)[13]; 638 kdbpcb.pcb_regs[T5] = ((int *)&args)[14]; 639 kdbpcb.pcb_regs[T6] = ((int *)&args)[15]; 640 kdbpcb.pcb_regs[T7] = ((int *)&args)[16]; 641 kdbpcb.pcb_regs[T8] = ((int *)&args)[17]; 642 kdbpcb.pcb_regs[T9] = ((int *)&args)[18]; 643 kdbpcb.pcb_regs[RA] = ((int *)&args)[19]; 644 kdbpcb.pcb_regs[MULLO] = ((int *)&args)[21]; 645 kdbpcb.pcb_regs[MULHI] = ((int *)&args)[22]; 646 kdbpcb.pcb_regs[PC] = pc; 647 kdbpcb.pcb_regs[SR] = statusReg; 648 bzero((caddr_t)&kdbpcb.pcb_regs[F0], 33 * sizeof(int)); 649 } 650 if (kdb(causeReg, vadr, p, !USERMODE(statusReg))) 651 return (kdbpcb.pcb_regs[PC]); 652 } 653 #else 654 #ifdef DEBUG 655 trapDump("trap"); 656 #endif 657 #endif 658 panic("trap"); 659 } 660 trapsignal(p, i, ucode); 661 out: 662 /* 663 * Note: we should only get here if returning to user mode. 664 */ 665 /* take pending signals */ 666 while ((i = CURSIG(p)) != 0) 667 psig(i); 668 p->p_pri = p->p_usrpri; 669 astpending = 0; 670 if (want_resched) { 671 int s; 672 673 /* 674 * Since we are curproc, clock will normally just change 675 * our priority without moving us from one queue to another 676 * (since the running process is not on a queue.) 677 * If that happened after we setrq ourselves but before we 678 * swtch()'ed, we might not be on the queue indicated by 679 * our priority. 680 */ 681 s = splstatclock(); 682 setrq(p); 683 p->p_stats->p_ru.ru_nivcsw++; 684 swtch(); 685 splx(s); 686 while ((i = CURSIG(p)) != 0) 687 psig(i); 688 } 689 690 /* 691 * If profiling, charge system time to the trapped pc. 692 */ 693 if (p->p_flag & SPROFIL) { 694 extern int psratio; 695 696 addupc_task(p, pc, (int)(p->p_sticks - sticks) * psratio); 697 } 698 699 curpri = p->p_pri; 700 return (pc); 701 } 702 703 /* 704 * Handle an interrupt. 705 * Called from MachKernIntr() or MachUserIntr() 706 * Note: curproc might be NULL. 707 */ 708 interrupt(statusReg, causeReg, pc) 709 unsigned statusReg; /* status register at time of the exception */ 710 unsigned causeReg; /* cause register at time of exception */ 711 unsigned pc; /* program counter where to continue */ 712 { 713 register unsigned mask; 714 struct clockframe cf; 715 716 #ifdef DEBUG 717 trp->status = statusReg; 718 trp->cause = causeReg; 719 trp->vadr = 0; 720 trp->pc = pc; 721 trp->ra = 0; 722 trp->code = 0; 723 if (++trp == &trapdebug[TRAPSIZE]) 724 trp = trapdebug; 725 #endif 726 727 cnt.v_intr++; 728 mask = causeReg & statusReg; /* pending interrupts & enable mask */ 729 if (pmax_hardware_intr) 730 splx((*pmax_hardware_intr)(mask, pc, statusReg, causeReg)); 731 if (mask & MACH_INT_MASK_5) { 732 if (!USERMODE(statusReg)) { 733 #ifdef DEBUG 734 trapDump("fpintr"); 735 #else 736 printf("FPU interrupt: PC %x CR %x SR %x\n", 737 pc, causeReg, statusReg); 738 #endif 739 } else 740 MachFPInterrupt(statusReg, causeReg, pc); 741 } 742 if (mask & MACH_SOFT_INT_MASK_0) { 743 clearsoftclock(); 744 cnt.v_soft++; 745 softclock(); 746 } 747 /* process network interrupt if we trapped or will very soon */ 748 if ((mask & MACH_SOFT_INT_MASK_1) || 749 netisr && (statusReg & MACH_SOFT_INT_MASK_1)) { 750 clearsoftnet(); 751 cnt.v_soft++; 752 #ifdef INET 753 if (netisr & (1 << NETISR_ARP)) { 754 netisr &= ~(1 << NETISR_ARP); 755 arpintr(); 756 } 757 if (netisr & (1 << NETISR_IP)) { 758 netisr &= ~(1 << NETISR_IP); 759 ipintr(); 760 } 761 #endif 762 #ifdef NS 763 if (netisr & (1 << NETISR_NS)) { 764 netisr &= ~(1 << NETISR_NS); 765 nsintr(); 766 } 767 #endif 768 #ifdef ISO 769 if (netisr & (1 << NETISR_ISO)) { 770 netisr &= ~(1 << NETISR_ISO); 771 clnlintr(); 772 } 773 #endif 774 } 775 } 776 777 /* 778 * Handle pmax (DECstation 2100/3100) interrupts. 779 */ 780 pmax_intr(mask, pc, statusReg, causeReg) 781 unsigned mask; 782 unsigned pc; 783 unsigned statusReg; 784 unsigned causeReg; 785 { 786 register volatile struct chiptime *c = Mach_clock_addr; 787 struct clockframe cf; 788 int temp; 789 790 /* handle clock interrupts ASAP */ 791 if (mask & MACH_INT_MASK_3) { 792 temp = c->regc; /* XXX clear interrupt bits */ 793 cf.pc = pc; 794 cf.sr = statusReg; 795 hardclock(&cf); 796 /* keep clock interrupts enabled */ 797 causeReg &= ~MACH_INT_MASK_3; 798 } 799 /* Re-enable clock interrupts */ 800 splx(MACH_INT_MASK_3 | MACH_SR_INT_ENA_CUR); 801 #if NSII > 0 802 if (mask & MACH_INT_MASK_0) 803 siiintr(0); 804 #endif 805 #if NLE > 0 806 if (mask & MACH_INT_MASK_1) 807 leintr(0); 808 #endif 809 #if NDC > 0 810 if (mask & MACH_INT_MASK_2) 811 dcintr(0); 812 #endif 813 if (mask & MACH_INT_MASK_4) 814 pmax_errintr(); 815 return ((statusReg & ~causeReg & MACH_HARD_INT_MASK) | 816 MACH_SR_INT_ENA_CUR); 817 } 818 819 /* 820 * Handle hardware interrupts for the KN02. (DECstation 5000/200) 821 * Returns spl value. 822 */ 823 kn02_intr(mask, pc, statusReg, causeReg) 824 unsigned mask; 825 unsigned pc; 826 unsigned statusReg; 827 unsigned causeReg; 828 { 829 register unsigned i, m; 830 register volatile struct chiptime *c = Mach_clock_addr; 831 register unsigned csr; 832 int temp; 833 struct clockframe cf; 834 static int warned = 0; 835 836 /* handle clock interrupts ASAP */ 837 if (mask & MACH_INT_MASK_1) { 838 csr = *(unsigned *)MACH_PHYS_TO_UNCACHED(KN02_SYS_CSR); 839 if ((csr & KN02_CSR_PSWARN) && !warned) { 840 warned = 1; 841 printf("WARNING: power supply is overheating!\n"); 842 } else if (warned && !(csr & KN02_CSR_PSWARN)) { 843 warned = 0; 844 printf("WARNING: power supply is OK again\n"); 845 } 846 847 temp = c->regc; /* XXX clear interrupt bits */ 848 cf.pc = pc; 849 cf.sr = statusReg; 850 hardclock(&cf); 851 852 /* keep clock interrupts enabled */ 853 causeReg &= ~MACH_INT_MASK_1; 854 } 855 /* Re-enable clock interrupts */ 856 splx(MACH_INT_MASK_1 | MACH_SR_INT_ENA_CUR); 857 if (mask & MACH_INT_MASK_0) { 858 859 csr = *(unsigned *)MACH_PHYS_TO_UNCACHED(KN02_SYS_CSR); 860 m = csr & (csr >> KN02_CSR_IOINTEN_SHIFT) & KN02_CSR_IOINT; 861 #if 0 862 *(unsigned *)MACHPHYS_TO_UNCACHED(KN02_SYS_CSR) = 863 (csr & ~(KN02_CSR_WRESERVED | 0xFF)) | 864 (m << KN02_CSR_IOINTEN_SHIFT); 865 #endif 866 for (i = 0; m; i++, m >>= 1) { 867 if (!(m & 1)) 868 continue; 869 if (tc_slot_info[i].intr) 870 (*tc_slot_info[i].intr)(tc_slot_info[i].unit); 871 else 872 printf("spurious interrupt %d\n", i); 873 } 874 #if 0 875 *(unsigned *)MACH_PHYS_TO_UNCACHED(KN02_SYS_CSR) = 876 csr & ~(KN02_CSR_WRESERVED | 0xFF); 877 #endif 878 } 879 if (mask & MACH_INT_MASK_3) 880 kn02_errintr(); 881 return ((statusReg & ~causeReg & MACH_HARD_INT_MASK) | 882 MACH_SR_INT_ENA_CUR); 883 } 884 885 /* 886 * 3min hardware interrupts. (DECstation 5000/1xx) 887 */ 888 kmin_intr(mask, pc, statusReg, causeReg) 889 unsigned mask; 890 unsigned pc; 891 unsigned statusReg; 892 unsigned causeReg; 893 { 894 register u_int intr; 895 register volatile struct chiptime *c = Mach_clock_addr; 896 volatile u_int *imaskp = 897 (volatile u_int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_IMSK); 898 volatile u_int *intrp = 899 (volatile u_int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_INTR); 900 unsigned int old_mask; 901 struct clockframe cf; 902 int temp; 903 static int user_warned = 0; 904 905 old_mask = *imaskp & kmin_tc3_imask; 906 *imaskp = old_mask; 907 908 if (mask & MACH_INT_MASK_4) 909 (*callv->halt)((int *)0, 0); 910 if (mask & MACH_INT_MASK_3) { 911 intr = *intrp; 912 /* masked interrupts are still observable */ 913 intr &= old_mask; 914 915 if (intr & KMIN_INTR_SCSI_PTR_LOAD) { 916 *intrp &= ~KMIN_INTR_SCSI_PTR_LOAD; 917 #ifdef notdef 918 asc_dma_intr(); 919 #endif 920 } 921 922 if (intr & (KMIN_INTR_SCSI_OVRUN | KMIN_INTR_SCSI_READ_E)) 923 *intrp &= ~(KMIN_INTR_SCSI_OVRUN | KMIN_INTR_SCSI_READ_E); 924 925 if (intr & KMIN_INTR_LANCE_READ_E) 926 *intrp &= ~KMIN_INTR_LANCE_READ_E; 927 928 if (intr & KMIN_INTR_TIMEOUT) 929 kn02ba_errintr(); 930 931 if (intr & KMIN_INTR_CLOCK) { 932 temp = c->regc; /* XXX clear interrupt bits */ 933 cf.pc = pc; 934 cf.sr = statusReg; 935 hardclock(&cf); 936 } 937 938 if ((intr & KMIN_INTR_SCC_0) && 939 tc_slot_info[KMIN_SCC0_SLOT].intr) 940 (*(tc_slot_info[KMIN_SCC0_SLOT].intr)) 941 (tc_slot_info[KMIN_SCC0_SLOT].unit); 942 943 if ((intr & KMIN_INTR_SCC_1) && 944 tc_slot_info[KMIN_SCC1_SLOT].intr) 945 (*(tc_slot_info[KMIN_SCC1_SLOT].intr)) 946 (tc_slot_info[KMIN_SCC1_SLOT].unit); 947 948 if ((intr & KMIN_INTR_SCSI) && 949 tc_slot_info[KMIN_SCSI_SLOT].intr) 950 (*(tc_slot_info[KMIN_SCSI_SLOT].intr)) 951 (tc_slot_info[KMIN_SCSI_SLOT].unit); 952 953 if ((intr & KMIN_INTR_LANCE) && 954 tc_slot_info[KMIN_LANCE_SLOT].intr) 955 (*(tc_slot_info[KMIN_LANCE_SLOT].intr)) 956 (tc_slot_info[KMIN_LANCE_SLOT].unit); 957 958 if (user_warned && ((intr & KMIN_INTR_PSWARN) == 0)) { 959 printf("%s\n", "Power supply ok now."); 960 user_warned = 0; 961 } 962 if ((intr & KMIN_INTR_PSWARN) && (user_warned < 3)) { 963 user_warned++; 964 printf("%s\n", "Power supply overheating"); 965 } 966 } 967 if ((mask & MACH_INT_MASK_0) && tc_slot_info[0].intr) 968 (*tc_slot_info[0].intr)(tc_slot_info[0].unit); 969 if ((mask & MACH_INT_MASK_1) && tc_slot_info[1].intr) 970 (*tc_slot_info[1].intr)(tc_slot_info[1].unit); 971 if ((mask & MACH_INT_MASK_2) && tc_slot_info[2].intr) 972 (*tc_slot_info[2].intr)(tc_slot_info[2].unit); 973 return ((statusReg & ~causeReg & MACH_HARD_INT_MASK) | 974 MACH_SR_INT_ENA_CUR); 975 } 976 977 /* 978 * Maxine hardware interrupts. (Personal DECstation 5000/xx) 979 */ 980 xine_intr(mask, pc, statusReg, causeReg) 981 unsigned mask; 982 unsigned pc; 983 unsigned statusReg; 984 unsigned causeReg; 985 { 986 register u_int intr; 987 register volatile struct chiptime *c = Mach_clock_addr; 988 volatile u_int *imaskp = (volatile u_int *) 989 MACH_PHYS_TO_UNCACHED(XINE_REG_IMSK); 990 volatile u_int *intrp = (volatile u_int *) 991 MACH_PHYS_TO_UNCACHED(XINE_REG_INTR); 992 u_int old_mask; 993 struct clockframe cf; 994 int temp; 995 996 old_mask = *imaskp & xine_tc3_imask; 997 *imaskp = old_mask; 998 999 if (mask & MACH_INT_MASK_4) 1000 (*callv->halt)((int *)0, 0); 1001 1002 /* handle clock interrupts ASAP */ 1003 if (mask & MACH_INT_MASK_1) { 1004 temp = c->regc; /* XXX clear interrupt bits */ 1005 cf.pc = pc; 1006 cf.sr = statusReg; 1007 hardclock(&cf); 1008 causeReg &= ~MACH_INT_MASK_1; 1009 /* reenable clock interrupts */ 1010 splx(MACH_INT_MASK_1 | MACH_SR_INT_ENA_CUR); 1011 } 1012 if (mask & MACH_INT_MASK_3) { 1013 intr = *intrp; 1014 /* masked interrupts are still observable */ 1015 intr &= old_mask; 1016 1017 if (intr & XINE_INTR_SCSI_PTR_LOAD) { 1018 *intrp &= ~XINE_INTR_SCSI_PTR_LOAD; 1019 #ifdef notdef 1020 asc_dma_intr(); 1021 #endif 1022 } 1023 1024 if (intr & (XINE_INTR_SCSI_OVRUN | XINE_INTR_SCSI_READ_E)) 1025 *intrp &= ~(XINE_INTR_SCSI_OVRUN | XINE_INTR_SCSI_READ_E); 1026 1027 if (intr & XINE_INTR_LANCE_READ_E) 1028 *intrp &= ~XINE_INTR_LANCE_READ_E; 1029 1030 if ((intr & XINE_INTR_SCC_0) && 1031 tc_slot_info[XINE_SCC0_SLOT].intr) 1032 (*(tc_slot_info[XINE_SCC0_SLOT].intr)) 1033 (tc_slot_info[XINE_SCC0_SLOT].unit); 1034 1035 if ((intr & XINE_INTR_DTOP_RX) && 1036 tc_slot_info[XINE_DTOP_SLOT].intr) 1037 (*(tc_slot_info[XINE_DTOP_SLOT].intr)) 1038 (tc_slot_info[XINE_DTOP_SLOT].unit); 1039 1040 if ((intr & XINE_INTR_FLOPPY) && 1041 tc_slot_info[XINE_FLOPPY_SLOT].intr) 1042 (*(tc_slot_info[XINE_FLOPPY_SLOT].intr)) 1043 (tc_slot_info[XINE_FLOPPY_SLOT].unit); 1044 1045 if ((intr & XINE_INTR_TC_0) && 1046 tc_slot_info[0].intr) 1047 (*(tc_slot_info[0].intr)) 1048 (tc_slot_info[0].unit); 1049 1050 if ((intr & XINE_INTR_TC_1) && 1051 tc_slot_info[1].intr) 1052 (*(tc_slot_info[1].intr)) 1053 (tc_slot_info[1].unit); 1054 1055 if ((intr & XINE_INTR_ISDN) && 1056 tc_slot_info[XINE_ISDN_SLOT].intr) 1057 (*(tc_slot_info[XINE_ISDN_SLOT].intr)) 1058 (tc_slot_info[XINE_ISDN_SLOT].unit); 1059 1060 if ((intr & XINE_INTR_SCSI) && 1061 tc_slot_info[XINE_SCSI_SLOT].intr) 1062 (*(tc_slot_info[XINE_SCSI_SLOT].intr)) 1063 (tc_slot_info[XINE_SCSI_SLOT].unit); 1064 1065 if ((intr & XINE_INTR_LANCE) && 1066 tc_slot_info[XINE_LANCE_SLOT].intr) 1067 (*(tc_slot_info[XINE_LANCE_SLOT].intr)) 1068 (tc_slot_info[XINE_LANCE_SLOT].unit); 1069 1070 } 1071 if (mask & MACH_INT_MASK_2) 1072 kn02ba_errintr(); 1073 return ((statusReg & ~causeReg & MACH_HARD_INT_MASK) | 1074 MACH_SR_INT_ENA_CUR); 1075 } 1076 1077 #ifdef DS5000_240 1078 /* 1079 * 3Max+ hardware interrupts. (DECstation 5000/240) UNTESTED!! 1080 */ 1081 kn03_intr(mask, pc, statusReg, causeReg) 1082 unsigned mask; 1083 unsigned pc; 1084 unsigned statusReg; 1085 unsigned causeReg; 1086 { 1087 register u_int intr; 1088 register volatile struct chiptime *c = Mach_clock_addr; 1089 volatile u_int *imaskp = (volatile u_int *) 1090 MACH_PHYS_TO_UNCACHED(KN03_REG_IMSK); 1091 volatile u_int *intrp = (volatile u_int *) 1092 MACH_PHYS_TO_UNCACHED(KN03_REG_INTR); 1093 u_int old_mask; 1094 struct clockframe cf; 1095 int temp; 1096 static int user_warned = 0; 1097 1098 old_mask = *imaskp & kn03_tc3_imask; 1099 *imaskp = old_mask; 1100 1101 if (mask & MACH_INT_MASK_4) 1102 (*callv->halt)((int *)0, 0); 1103 1104 /* handle clock interrupts ASAP */ 1105 if (mask & MACH_INT_MASK_1) { 1106 temp = c->regc; /* XXX clear interrupt bits */ 1107 cf.pc = pc; 1108 cf.sr = statusReg; 1109 hardclock(&cf); 1110 causeReg &= ~MACH_INT_MASK_1; 1111 /* reenable clock interrupts */ 1112 splx(MACH_INT_MASK_1 | MACH_SR_INT_ENA_CUR); 1113 } 1114 if (mask & MACH_INT_MASK_0) { 1115 intr = *intrp; 1116 /* masked interrupts are still observable */ 1117 intr &= old_mask; 1118 1119 if (intr & KN03_INTR_SCSI_PTR_LOAD) { 1120 *intrp &= ~KN03_INTR_SCSI_PTR_LOAD; 1121 #ifdef notdef 1122 asc_dma_intr(); 1123 #endif 1124 } 1125 1126 if (intr & (KN03_INTR_SCSI_OVRUN | KN03_INTR_SCSI_READ_E)) 1127 *intrp &= ~(KN03_INTR_SCSI_OVRUN | KN03_INTR_SCSI_READ_E); 1128 1129 if (intr & KN03_INTR_LANCE_READ_E) 1130 *intrp &= ~KN03_INTR_LANCE_READ_E; 1131 1132 if ((intr & KN03_INTR_SCC_0) && 1133 tc_slot_info[KN03_SCC0_SLOT].intr) 1134 (*(tc_slot_info[KN03_SCC0_SLOT].intr)) 1135 (tc_slot_info[KN03_SCC0_SLOT].unit); 1136 1137 if ((intr & KN03_INTR_SCC_1) && 1138 tc_slot_info[KN03_SCC1_SLOT].intr) 1139 (*(tc_slot_info[KN03_SCC1_SLOT].intr)) 1140 (tc_slot_info[KN03_SCC1_SLOT].unit); 1141 1142 if ((intr & KN03_INTR_TC_0) && 1143 tc_slot_info[0].intr) 1144 (*(tc_slot_info[0].intr)) 1145 (tc_slot_info[0].unit); 1146 1147 if ((intr & KN03_INTR_TC_1) && 1148 tc_slot_info[1].intr) 1149 (*(tc_slot_info[1].intr)) 1150 (tc_slot_info[1].unit); 1151 1152 if ((intr & KN03_INTR_TC_2) && 1153 tc_slot_info[2].intr) 1154 (*(tc_slot_info[2].intr)) 1155 (tc_slot_info[2].unit); 1156 1157 if ((intr & KN03_INTR_SCSI) && 1158 tc_slot_info[KN03_SCSI_SLOT].intr) 1159 (*(tc_slot_info[KN03_SCSI_SLOT].intr)) 1160 (tc_slot_info[KN03_SCSI_SLOT].unit); 1161 1162 if ((intr & KN03_INTR_LANCE) && 1163 tc_slot_info[KN03_LANCE_SLOT].intr) 1164 (*(tc_slot_info[KN03_LANCE_SLOT].intr)) 1165 (tc_slot_info[KN03_LANCE_SLOT].unit); 1166 1167 if (user_warned && ((intr & KN03_INTR_PSWARN) == 0)) { 1168 printf("%s\n", "Power supply ok now."); 1169 user_warned = 0; 1170 } 1171 if ((intr & KN03_INTR_PSWARN) && (user_warned < 3)) { 1172 user_warned++; 1173 printf("%s\n", "Power supply overheating"); 1174 } 1175 } 1176 if (mask & MACH_INT_MASK_3) 1177 kn03_errintr(); 1178 return ((statusReg & ~causeReg & MACH_HARD_INT_MASK) | 1179 MACH_SR_INT_ENA_CUR); 1180 } 1181 #endif /* DS5000_240 */ 1182 1183 /* 1184 * This is called from MachUserIntr() if astpending is set. 1185 * This is very similar to the tail of trap(). 1186 */ 1187 softintr(statusReg, pc) 1188 unsigned statusReg; /* status register at time of the exception */ 1189 unsigned pc; /* program counter where to continue */ 1190 { 1191 register struct proc *p = curproc; 1192 int sig; 1193 1194 cnt.v_soft++; 1195 /* take pending signals */ 1196 while ((sig = CURSIG(p)) != 0) 1197 psig(sig); 1198 p->p_pri = p->p_usrpri; 1199 astpending = 0; 1200 if (p->p_flag & SOWEUPC) { 1201 p->p_flag &= ~SOWEUPC; 1202 ADDUPROF(p); 1203 } 1204 if (want_resched) { 1205 int s; 1206 1207 /* 1208 * Since we are curproc, clock will normally just change 1209 * our priority without moving us from one queue to another 1210 * (since the running process is not on a queue.) 1211 * If that happened after we setrq ourselves but before we 1212 * swtch()'ed, we might not be on the queue indicated by 1213 * our priority. 1214 */ 1215 s = splstatclock(); 1216 setrq(p); 1217 p->p_stats->p_ru.ru_nivcsw++; 1218 swtch(); 1219 splx(s); 1220 while ((sig = CURSIG(p)) != 0) 1221 psig(sig); 1222 } 1223 curpri = p->p_pri; 1224 } 1225 1226 #ifdef DEBUG 1227 trapDump(msg) 1228 char *msg; 1229 { 1230 register int i; 1231 int s; 1232 1233 s = splhigh(); 1234 printf("trapDump(%s)\n", msg); 1235 for (i = 0; i < TRAPSIZE; i++) { 1236 if (trp == trapdebug) 1237 trp = &trapdebug[TRAPSIZE - 1]; 1238 else 1239 trp--; 1240 if (trp->cause == 0) 1241 break; 1242 printf("%s: ADR %x PC %x CR %x SR %x\n", 1243 trap_type[(trp->cause & MACH_CR_EXC_CODE) >> 1244 MACH_CR_EXC_CODE_SHIFT], 1245 trp->vadr, trp->pc, trp->cause, trp->status); 1246 printf(" RA %x code %d\n", trp-> ra, trp->code); 1247 } 1248 bzero(trapdebug, sizeof(trapdebug)); 1249 trp = trapdebug; 1250 splx(s); 1251 } 1252 #endif 1253 1254 /* 1255 *---------------------------------------------------------------------- 1256 * 1257 * MemErrorInterrupts -- 1258 * pmax_errintr - for the DS2100/DS3100 1259 * kn02_errintr - for the DS5000/200 1260 * kn02ba_errintr - for the DS5000/1xx and DS5000/xx 1261 * 1262 * Handler an interrupt for the control register. 1263 * 1264 * Results: 1265 * None. 1266 * 1267 * Side effects: 1268 * None. 1269 * 1270 *---------------------------------------------------------------------- 1271 */ 1272 static void 1273 pmax_errintr() 1274 { 1275 volatile u_short *sysCSRPtr = 1276 (u_short *)MACH_PHYS_TO_UNCACHED(KN01_SYS_CSR); 1277 u_short csr; 1278 1279 csr = *sysCSRPtr; 1280 1281 if (csr & KN01_CSR_MERR) { 1282 printf("Memory error at 0x%x\n", 1283 *(unsigned *)MACH_PHYS_TO_UNCACHED(KN01_SYS_ERRADR)); 1284 panic("Mem error interrupt"); 1285 } 1286 *sysCSRPtr = (csr & ~KN01_CSR_MBZ) | 0xff; 1287 } 1288 1289 static void 1290 kn02_errintr() 1291 { 1292 1293 printf("erradr %x\n", *(unsigned *)MACH_PHYS_TO_UNCACHED(KN02_SYS_ERRADR)); 1294 *(unsigned *)MACH_PHYS_TO_UNCACHED(KN02_SYS_ERRADR) = 0; 1295 MachEmptyWriteBuffer(); 1296 } 1297 1298 #ifdef DS5000_240 1299 static void 1300 kn03_errintr() 1301 { 1302 1303 printf("erradr %x\n", *(unsigned *)MACH_PHYS_TO_UNCACHED(KN03_SYS_ERRADR)); 1304 *(unsigned *)MACH_PHYS_TO_UNCACHED(KN03_SYS_ERRADR) = 0; 1305 MachEmptyWriteBuffer(); 1306 } 1307 #endif /* DS5000_240 */ 1308 1309 static void 1310 kn02ba_errintr() 1311 { 1312 register int mer, adr, siz; 1313 static int errintr_cnt = 0; 1314 1315 siz = *(volatile int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_MSR); 1316 mer = *(volatile int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_MER); 1317 adr = *(volatile int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_AER); 1318 1319 /* clear interrupt bit */ 1320 *(unsigned int *)MACH_PHYS_TO_UNCACHED(KMIN_REG_TIMEOUT) = 0; 1321 1322 errintr_cnt++; 1323 printf("(%d)%s%x [%x %x %x]\n", errintr_cnt, 1324 "Bad memory chip at phys ", 1325 kn02ba_recover_erradr(adr, mer), 1326 mer, siz, adr); 1327 } 1328 1329 static unsigned 1330 kn02ba_recover_erradr(phys, mer) 1331 register unsigned phys, mer; 1332 { 1333 /* phys holds bits 28:2, mer knows which byte */ 1334 switch (mer & KMIN_MER_LASTBYTE) { 1335 case KMIN_LASTB31: 1336 mer = 3; break; 1337 case KMIN_LASTB23: 1338 mer = 2; break; 1339 case KMIN_LASTB15: 1340 mer = 1; break; 1341 case KMIN_LASTB07: 1342 mer = 0; break; 1343 } 1344 return ((phys & KMIN_AER_ADDR_MASK) | mer); 1345 } 1346 1347 /* 1348 * Return the resulting PC as if the branch was executed. 1349 */ 1350 unsigned 1351 MachEmulateBranch(regsPtr, instPC, fpcCSR, allowNonBranch) 1352 unsigned *regsPtr; 1353 unsigned instPC; 1354 unsigned fpcCSR; 1355 int allowNonBranch; 1356 { 1357 InstFmt inst; 1358 unsigned retAddr; 1359 int condition; 1360 extern unsigned GetBranchDest(); 1361 1362 #if 0 1363 printf("regsPtr=%x PC=%x Inst=%x fpcCsr=%x\n", regsPtr, instPC, 1364 *instPC, fpcCSR); 1365 #endif 1366 1367 inst = *(InstFmt *)instPC; 1368 switch ((int)inst.JType.op) { 1369 case OP_SPECIAL: 1370 switch ((int)inst.RType.func) { 1371 case OP_JR: 1372 case OP_JALR: 1373 retAddr = regsPtr[inst.RType.rs]; 1374 break; 1375 1376 default: 1377 if (!allowNonBranch) 1378 panic("MachEmulateBranch: Non-branch"); 1379 retAddr = instPC + 4; 1380 break; 1381 } 1382 break; 1383 1384 case OP_BCOND: 1385 switch ((int)inst.IType.rt) { 1386 case OP_BLTZ: 1387 case OP_BLTZAL: 1388 if ((int)(regsPtr[inst.RType.rs]) < 0) 1389 retAddr = GetBranchDest((InstFmt *)instPC); 1390 else 1391 retAddr = instPC + 8; 1392 break; 1393 1394 case OP_BGEZAL: 1395 case OP_BGEZ: 1396 if ((int)(regsPtr[inst.RType.rs]) >= 0) 1397 retAddr = GetBranchDest((InstFmt *)instPC); 1398 else 1399 retAddr = instPC + 8; 1400 break; 1401 1402 default: 1403 panic("MachEmulateBranch: Bad branch cond"); 1404 } 1405 break; 1406 1407 case OP_J: 1408 case OP_JAL: 1409 retAddr = (inst.JType.target << 2) | 1410 ((unsigned)instPC & 0xF0000000); 1411 break; 1412 1413 case OP_BEQ: 1414 if (regsPtr[inst.RType.rs] == regsPtr[inst.RType.rt]) 1415 retAddr = GetBranchDest((InstFmt *)instPC); 1416 else 1417 retAddr = instPC + 8; 1418 break; 1419 1420 case OP_BNE: 1421 if (regsPtr[inst.RType.rs] != regsPtr[inst.RType.rt]) 1422 retAddr = GetBranchDest((InstFmt *)instPC); 1423 else 1424 retAddr = instPC + 8; 1425 break; 1426 1427 case OP_BLEZ: 1428 if ((int)(regsPtr[inst.RType.rs]) <= 0) 1429 retAddr = GetBranchDest((InstFmt *)instPC); 1430 else 1431 retAddr = instPC + 8; 1432 break; 1433 1434 case OP_BGTZ: 1435 if ((int)(regsPtr[inst.RType.rs]) > 0) 1436 retAddr = GetBranchDest((InstFmt *)instPC); 1437 else 1438 retAddr = instPC + 8; 1439 break; 1440 1441 case OP_COP1: 1442 switch (inst.RType.rs) { 1443 case OP_BCx: 1444 case OP_BCy: 1445 if ((inst.RType.rt & COPz_BC_TF_MASK) == COPz_BC_TRUE) 1446 condition = fpcCSR & MACH_FPC_COND_BIT; 1447 else 1448 condition = !(fpcCSR & MACH_FPC_COND_BIT); 1449 if (condition) 1450 retAddr = GetBranchDest((InstFmt *)instPC); 1451 else 1452 retAddr = instPC + 8; 1453 break; 1454 1455 default: 1456 if (!allowNonBranch) 1457 panic("MachEmulateBranch: Bad coproc branch instruction"); 1458 retAddr = instPC + 4; 1459 } 1460 break; 1461 1462 default: 1463 if (!allowNonBranch) 1464 panic("MachEmulateBranch: Non-branch instruction"); 1465 retAddr = instPC + 4; 1466 } 1467 #if 0 1468 printf("Target addr=%x\n", retAddr); 1469 #endif 1470 return (retAddr); 1471 } 1472 1473 unsigned 1474 GetBranchDest(InstPtr) 1475 InstFmt *InstPtr; 1476 { 1477 return ((unsigned)InstPtr + 4 + ((short)InstPtr->IType.imm << 2)); 1478 } 1479 1480 /* 1481 * This routine is called by procxmt() to single step one instruction. 1482 * We do this by storing a break instruction after the current instruction, 1483 * resuming execution, and then restoring the old instruction. 1484 */ 1485 cpu_singlestep(p) 1486 register struct proc *p; 1487 { 1488 register unsigned va; 1489 register int *locr0 = p->p_md.md_regs; 1490 int i; 1491 1492 /* compute next address after current location */ 1493 va = MachEmulateBranch(locr0, locr0[PC], 0, 1); 1494 if (p->p_md.md_ss_addr || p->p_md.md_ss_addr == va || 1495 !useracc((caddr_t)va, 4, B_READ)) { 1496 printf("SS %s (%d): breakpoint already set at %x (va %x)\n", 1497 p->p_comm, p->p_pid, p->p_md.md_ss_addr, va); /* XXX */ 1498 return (EFAULT); 1499 } 1500 p->p_md.md_ss_addr = va; 1501 p->p_md.md_ss_instr = fuiword((caddr_t)va); 1502 i = suiword((caddr_t)va, MACH_BREAK_SSTEP); 1503 if (i < 0) { 1504 vm_offset_t sa, ea; 1505 int rv; 1506 1507 sa = trunc_page((vm_offset_t)va); 1508 ea = round_page((vm_offset_t)va+sizeof(int)-1); 1509 rv = vm_map_protect(&p->p_vmspace->vm_map, sa, ea, 1510 VM_PROT_DEFAULT, FALSE); 1511 if (rv == KERN_SUCCESS) { 1512 i = suiword((caddr_t)va, MACH_BREAK_SSTEP); 1513 (void) vm_map_protect(&p->p_vmspace->vm_map, 1514 sa, ea, VM_PROT_READ|VM_PROT_EXECUTE, FALSE); 1515 } 1516 } 1517 if (i < 0) 1518 return (EFAULT); 1519 printf("SS %s (%d): breakpoint set at %x: %x (pc %x)\n", 1520 p->p_comm, p->p_pid, p->p_md.md_ss_addr, 1521 p->p_md.md_ss_instr, locr0[PC]); /* XXX */ 1522 return (0); 1523 } 1524 1525 #ifdef DEBUG 1526 kdbpeek(addr) 1527 { 1528 if (addr & 3) { 1529 printf("kdbpeek: unaligned address %x\n", addr); 1530 return (-1); 1531 } 1532 return (*(int *)addr); 1533 } 1534 1535 #define MIPS_JR_RA 0x03e00008 /* instruction code for jr ra */ 1536 1537 /* 1538 * Print a stack backtrace. 1539 */ 1540 void 1541 stacktrace(a0, a1, a2, a3) 1542 int a0, a1, a2, a3; 1543 { 1544 unsigned pc, sp, fp, ra, va, subr; 1545 unsigned instr, mask; 1546 InstFmt i; 1547 int more, stksize; 1548 int regs[3]; 1549 extern setsoftclock(); 1550 extern char start[], edata[]; 1551 1552 cpu_getregs(regs); 1553 1554 /* get initial values from the exception frame */ 1555 sp = regs[0]; 1556 pc = regs[1]; 1557 ra = 0; 1558 fp = regs[2]; 1559 1560 loop: 1561 /* check for current PC in the kernel interrupt handler code */ 1562 if (pc >= (unsigned)MachKernIntr && pc < (unsigned)MachUserIntr) { 1563 /* NOTE: the offsets depend on the code in locore.s */ 1564 printf("interrupt\n"); 1565 a0 = kdbpeek(sp + 36); 1566 a1 = kdbpeek(sp + 40); 1567 a2 = kdbpeek(sp + 44); 1568 a3 = kdbpeek(sp + 48); 1569 pc = kdbpeek(sp + 20); 1570 ra = kdbpeek(sp + 92); 1571 sp = kdbpeek(sp + 100); 1572 fp = kdbpeek(sp + 104); 1573 } 1574 1575 /* check for current PC in the exception handler code */ 1576 if (pc >= 0x80000000 && pc < (unsigned)setsoftclock) { 1577 ra = 0; 1578 subr = 0; 1579 goto done; 1580 } 1581 1582 /* check for bad PC */ 1583 if (pc & 3 || pc < 0x80000000 || pc >= (unsigned)edata) { 1584 printf("PC 0x%x: not in kernel\n", pc); 1585 ra = 0; 1586 subr = 0; 1587 goto done; 1588 } 1589 1590 /* 1591 * Find the beginning of the current subroutine by scanning backwards 1592 * from the current PC for the end of the previous subroutine. 1593 */ 1594 va = pc - sizeof(int); 1595 while ((instr = kdbpeek(va)) != MIPS_JR_RA) 1596 va -= sizeof(int); 1597 va += 2 * sizeof(int); /* skip back over branch & delay slot */ 1598 /* skip over nulls which might separate .o files */ 1599 while ((instr = kdbpeek(va)) == 0) 1600 va += sizeof(int); 1601 subr = va; 1602 1603 /* scan forwards to find stack size and any saved registers */ 1604 stksize = 0; 1605 more = 3; 1606 mask = 0; 1607 for (; more; va += sizeof(int), more = (more == 3) ? 3 : more - 1) { 1608 /* stop if hit our current position */ 1609 if (va >= pc) 1610 break; 1611 instr = kdbpeek(va); 1612 i.word = instr; 1613 switch (i.JType.op) { 1614 case OP_SPECIAL: 1615 switch (i.RType.func) { 1616 case OP_JR: 1617 case OP_JALR: 1618 more = 2; /* stop after next instruction */ 1619 break; 1620 1621 case OP_SYSCALL: 1622 case OP_BREAK: 1623 more = 1; /* stop now */ 1624 }; 1625 break; 1626 1627 case OP_BCOND: 1628 case OP_J: 1629 case OP_JAL: 1630 case OP_BEQ: 1631 case OP_BNE: 1632 case OP_BLEZ: 1633 case OP_BGTZ: 1634 more = 2; /* stop after next instruction */ 1635 break; 1636 1637 case OP_COP0: 1638 case OP_COP1: 1639 case OP_COP2: 1640 case OP_COP3: 1641 switch (i.RType.rs) { 1642 case OP_BCx: 1643 case OP_BCy: 1644 more = 2; /* stop after next instruction */ 1645 }; 1646 break; 1647 1648 case OP_SW: 1649 /* look for saved registers on the stack */ 1650 if (i.IType.rs != 29) 1651 break; 1652 /* only restore the first one */ 1653 if (mask & (1 << i.IType.rt)) 1654 break; 1655 mask |= 1 << i.IType.rt; 1656 switch (i.IType.rt) { 1657 case 4: /* a0 */ 1658 a0 = kdbpeek(sp + (short)i.IType.imm); 1659 break; 1660 1661 case 5: /* a1 */ 1662 a1 = kdbpeek(sp + (short)i.IType.imm); 1663 break; 1664 1665 case 6: /* a2 */ 1666 a2 = kdbpeek(sp + (short)i.IType.imm); 1667 break; 1668 1669 case 7: /* a3 */ 1670 a3 = kdbpeek(sp + (short)i.IType.imm); 1671 break; 1672 1673 case 30: /* fp */ 1674 fp = kdbpeek(sp + (short)i.IType.imm); 1675 break; 1676 1677 case 31: /* ra */ 1678 ra = kdbpeek(sp + (short)i.IType.imm); 1679 } 1680 break; 1681 1682 case OP_ADDI: 1683 case OP_ADDIU: 1684 /* look for stack pointer adjustment */ 1685 if (i.IType.rs != 29 || i.IType.rt != 29) 1686 break; 1687 stksize = (short)i.IType.imm; 1688 } 1689 } 1690 1691 done: 1692 printf("%x+%x (%x,%x,%x,%x) ra %x sz %d\n", 1693 subr, pc - subr, a0, a1, a2, a3, ra, stksize); 1694 1695 if (ra) { 1696 if (pc == ra && stksize == 0) 1697 printf("stacktrace: loop!\n"); 1698 else { 1699 pc = ra; 1700 sp -= stksize; 1701 goto loop; 1702 } 1703 } 1704 } 1705 #endif /* DEBUG */ 1706