1 /* 2 * Copyright (c) 1985, 1986 Regents of the University of California. 3 * All rights reserved. The Berkeley software License Agreement 4 * specifies the terms and conditions for redistribution. 5 * 6 * @(#)dhu.c 7.14 (Berkeley) 02/12/91 7 */ 8 9 /* 10 * based on dh.c 6.3 84/03/15 11 * and on dmf.c 6.2 84/02/16 12 * 13 * Dave Johnson, Brown University Computer Science 14 * ddj%brown@csnet-relay 15 */ 16 17 #include "dhu.h" 18 #if NDHU > 0 19 /* 20 * DHU-11 driver 21 */ 22 #include "../include/pte.h" 23 24 #include "sys/param.h" 25 #include "sys/conf.h" 26 #include "sys/user.h" 27 #include "sys/proc.h" 28 #include "sys/ioctl.h" 29 #include "sys/tty.h" 30 #include "sys/ttydefaults.h" 31 #include "sys/map.h" 32 #include "sys/buf.h" 33 #include "sys/vm.h" 34 #include "sys/kernel.h" 35 #include "sys/syslog.h" 36 37 #include "uba.h" 38 #include "ubareg.h" 39 #include "ubavar.h" 40 #include "dhureg.h" 41 42 #include "sys/bkmac.h" 43 #include "sys/clist.h" 44 #include "sys/file.h" 45 #include "sys/uio.h" 46 47 /* 48 * Definition of the driver for the auto-configuration program. 49 */ 50 int dhuprobe(), dhuattach(), dhurint(), dhuxint(); 51 struct uba_device *dhuinfo[NDHU]; 52 u_short dhustd[] = { 160440, 160500, 0 }; /* some common addresses */ 53 struct uba_driver dhudriver = 54 { dhuprobe, 0, dhuattach, 0, dhustd, "dhu", dhuinfo }; 55 56 #define NDHULINE (NDHU*16) 57 58 #define UNIT(x) (minor(x)) 59 60 #ifndef PORTSELECTOR 61 #define SPEED TTYDEF_SPEED 62 #define LFLAG TTYDEF_LFLAG 63 #else 64 #define SPEED B4800 65 #define LFLAG (TTYDEF_LFLAG & ~ECHO) 66 #endif 67 68 /* 69 * default receive silo timeout value -- valid values are 2..255 70 * number of ms. to delay between first char received and receive interrupt 71 * 72 * A value of 20 gives same response as ABLE dh/dm with silo alarm = 0 73 */ 74 #define DHU_DEF_TIMO 20 75 76 /* 77 * Other values for silo timeout register defined here but not used: 78 * receive interrupt only on modem control or silo alarm (3/4 full) 79 */ 80 #define DHU_POLL_TIMO 0 81 /* 82 * receive interrupt immediately on receive character 83 */ 84 #define DHU_NO_TIMO 1 85 86 /* 87 * Local variables for the driver 88 */ 89 /* 90 * Baud rates: no 50, 200, or 38400 baud; all other rates are from "Group B". 91 * EXTA => 19200 baud 92 * EXTB => 2000 baud 93 */ 94 struct speedtab dhuspeedtab[] = { 95 19200, 14, 96 9600, 13, 97 4800, 11, 98 2400, 10, 99 2000, 9, 100 1800, 8, 101 1200, 7, 102 600, 6, 103 300, 5, 104 150, 4, 105 134, 3, 106 110, 2, 107 75, 1, 108 0, 0, 109 EXTA, 14, 110 EXTB, 9, 111 -1, -1, 112 }; 113 114 short dhusoftCAR[NDHU]; 115 116 struct tty dhu_tty[NDHULINE]; 117 int ndhu = NDHULINE; 118 int dhuact; /* mask of active dhu's */ 119 int dhustart(), ttrstrt(); 120 121 /* 122 * The clist space is mapped by one terminal driver onto each UNIBUS. 123 * The identity of the board which allocated resources is recorded, 124 * so the process may be repeated after UNIBUS resets. 125 * The UBACVT macro converts a clist space address for unibus uban 126 * into an i/o space address for the DMA routine. 127 */ 128 int dhu_uballoc[NUBA]; /* which dhu (if any) allocated unibus map */ 129 int cbase[NUBA]; /* base address of clists in unibus map */ 130 #define UBACVT(x, uban) (cbase[uban] + ((x)-(char *)cfree)) 131 132 /* 133 * Routine for configuration to force a dhu to interrupt. 134 */ 135 /*ARGSUSED*/ 136 dhuprobe(reg) 137 caddr_t reg; 138 { 139 register int br, cvec; /* these are ``value-result'' */ 140 register struct dhudevice *dhuaddr = (struct dhudevice *)reg; 141 int i; 142 143 #ifdef lint 144 br = 0; cvec = br; br = cvec; 145 if (ndhu == 0) ndhu = 1; 146 dhurint(0); dhuxint(0); 147 #endif 148 /* 149 * The basic idea here is: 150 * do a self-test by setting the Master-Reset bit 151 * if this fails, then return 152 * if successful, there will be 8 diagnostic codes in RX FIFO 153 * therefore ask for a Received-Data-Available interrupt 154 * wait for it... 155 * reset the interrupt-enable bit and flush out the diag. codes 156 */ 157 dhuaddr->dhucsr = DHU_CS_MCLR; 158 for (i = 0; i < 1000; i++) { 159 DELAY(10000); 160 if ((dhuaddr->dhucsr&DHU_CS_MCLR) == 0) 161 break; 162 } 163 if (dhuaddr->dhucsr&DHU_CS_MCLR) 164 return(0); 165 if (dhuaddr->dhucsr&DHU_CS_DFAIL) 166 return(0); 167 dhuaddr->dhucsr = DHU_CS_RIE; 168 DELAY(1000); 169 dhuaddr->dhucsr = 0; 170 while (dhuaddr->dhurbuf < 0) 171 /* void */; 172 return (sizeof(struct dhudevice)); 173 } 174 175 /* 176 * Routine called to attach a dhu. 177 */ 178 dhuattach(ui) 179 struct uba_device *ui; 180 { 181 182 dhusoftCAR[ui->ui_unit] = ui->ui_flags; 183 cbase[ui->ui_ubanum] = -1; 184 dhu_uballoc[ui->ui_ubanum] = -1; 185 } 186 187 /* 188 * Open a DHU11 line, mapping the clist onto the uba if this 189 * is the first dhu on this uba. Turn on this dhu if this is 190 * the first use of it. 191 */ 192 /*ARGSUSED*/ 193 dhuopen(dev, flag) 194 dev_t dev; 195 { 196 register struct tty *tp; 197 register int unit, dhu; 198 register struct dhudevice *addr; 199 register struct uba_device *ui; 200 int s, error = 0; 201 extern dhuparam(); 202 203 unit = UNIT(dev); 204 dhu = unit >> 4; 205 if (unit >= NDHULINE || (ui = dhuinfo[dhu])== 0 || ui->ui_alive == 0) 206 return (ENXIO); 207 tp = &dhu_tty[unit]; 208 if (tp->t_state & TS_XCLUDE && u.u_uid != 0) 209 return (EBUSY); 210 addr = (struct dhudevice *)ui->ui_addr; 211 tp->t_addr = (caddr_t)addr; 212 tp->t_oproc = dhustart; 213 tp->t_param = dhuparam; 214 /* 215 * While setting up state for this uba and this dhu, 216 * block uba resets which can clear the state. 217 */ 218 s = spl5(); 219 if (cbase[ui->ui_ubanum] == -1) { 220 dhu_uballoc[ui->ui_ubanum] = dhu; 221 cbase[ui->ui_ubanum] = UBAI_ADDR(uballoc(ui->ui_ubanum, 222 (caddr_t)cfree, nclist*sizeof(struct cblock), 0)); 223 } 224 if ((dhuact&(1<<dhu)) == 0) { 225 addr->dhucsr = DHU_SELECT(0) | DHU_IE; 226 addr->dhutimo = DHU_DEF_TIMO; 227 dhuact |= (1<<dhu); 228 /* anything else to configure whole board */ 229 } 230 (void) splx(s); 231 /* 232 * If this is first open, initialize tty state to default. 233 */ 234 if ((tp->t_state&TS_ISOPEN) == 0) { 235 tp->t_state |= TS_WOPEN; 236 ttychars(tp); 237 #ifndef PORTSELECTOR 238 if (tp->t_ospeed == 0) { 239 #endif 240 tp->t_ispeed = SPEED; 241 tp->t_ospeed = SPEED; 242 ttsetwater(tp); 243 tp->t_iflag = TTYDEF_IFLAG; 244 tp->t_oflag = TTYDEF_OFLAG; 245 tp->t_lflag = LFLAG; 246 tp->t_cflag = TTYDEF_CFLAG; 247 #ifdef PORTSELECTOR 248 tp->t_cflag |= HUPCL; 249 #else 250 } 251 #endif 252 tp->t_dev = dev; 253 dhuparam(tp, &tp->t_termios); 254 } 255 /* 256 * Wait for carrier, then process line discipline specific open. 257 */ 258 s = spltty(); 259 if ((dhumctl(dev, DHU_ON, DMSET) & DHU_CAR) || 260 (dhusoftCAR[dhu] & (1<<(unit&0xf)))) 261 tp->t_state |= TS_CARR_ON; 262 while ((flag&O_NONBLOCK) == 0 && (tp->t_cflag&CLOCAL) == 0 && 263 (tp->t_state & TS_CARR_ON) == 0) { 264 tp->t_state |= TS_WOPEN; 265 if (error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, 266 ttopen, 0)) 267 break; 268 } 269 (void) splx(s); 270 if (error) 271 return (error); 272 return ((*linesw[tp->t_line].l_open)(dev, tp)); 273 } 274 275 /* 276 * Close a DHU11 line, turning off the modem control. 277 */ 278 /*ARGSUSED*/ 279 dhuclose(dev, flag) 280 dev_t dev; 281 int flag; 282 { 283 register struct tty *tp; 284 register unit; 285 286 unit = UNIT(dev); 287 tp = &dhu_tty[unit]; 288 (*linesw[tp->t_line].l_close)(tp); 289 (void) dhumctl(unit, DHU_BRK, DMBIC); 290 if ((tp->t_state&TS_WOPEN) || (tp->t_cflag&HUPCL) || 291 (tp->t_state&TS_ISOPEN) == 0) { 292 #ifdef PORTSELECTOR 293 (void) dhumctl(unit, DHU_OFF, DMSET); 294 /* Hold DTR low for 0.5 seconds */ 295 (void) tsleep((caddr_t) &tp->t_dev, PZERO, ttclos, hz/2); 296 #else 297 (void) dhumctl(unit, DHU_OFF, DMSET); 298 #endif PORTSELECTOR 299 } 300 return (ttyclose(tp)); 301 } 302 303 dhuread(dev, uio, flag) 304 dev_t dev; 305 struct uio *uio; 306 { 307 register struct tty *tp = &dhu_tty[UNIT(dev)]; 308 309 return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); 310 } 311 312 dhuwrite(dev, uio, flag) 313 dev_t dev; 314 struct uio *uio; 315 { 316 register struct tty *tp = &dhu_tty[UNIT(dev)]; 317 318 return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); 319 } 320 321 /* 322 * DHU11 receiver interrupt. 323 */ 324 dhurint(dhu) 325 int dhu; 326 { 327 register struct tty *tp; 328 register creg, c; 329 register struct dhudevice *addr; 330 register struct tty *tp0; 331 register struct uba_device *ui; 332 register line; 333 int overrun = 0; 334 335 #ifdef QBA 336 (void) spltty(); 337 #endif 338 ui = dhuinfo[dhu]; 339 if (ui == 0 || ui->ui_alive == 0) 340 return; 341 addr = (struct dhudevice *)ui->ui_addr; 342 tp0 = &dhu_tty[dhu<<4]; 343 /* 344 * Loop fetching characters from the silo for this 345 * dhu until there are no more in the silo. 346 */ 347 while ((creg = addr->dhurbuf) < 0) { /* (c & DHU_RB_VALID) == on */ 348 line = DHU_RX_LINE(creg); 349 tp = tp0 + line; 350 c = creg & 0xff; 351 if ((creg & DHU_RB_STAT) == DHU_RB_STAT) { 352 /* 353 * modem changed or diag info 354 */ 355 if (creg & DHU_RB_DIAG) { 356 /* decode diagnostic messages */ 357 continue; 358 } 359 if (creg & DHU_ST_DCD) 360 (void)(*linesw[tp->t_line].l_modem)(tp, 1); 361 else if ((dhusoftCAR[dhu] & (1<<line)) == 0 && 362 (*linesw[tp->t_line].l_modem)(tp, 0) == 0) 363 (void) dhumctl((dhu<<4)|line, DHU_OFF, DMSET); 364 continue; 365 } 366 if ((tp->t_state&TS_ISOPEN) == 0) { 367 wakeup((caddr_t)&tp->t_rawq); 368 #ifdef PORTSELECTOR 369 if ((tp->t_state&TS_WOPEN) == 0) 370 #endif 371 continue; 372 } 373 if (creg & DHU_RB_PE) 374 c |= TTY_PE; 375 if (creg & DHU_RB_DO && overrun == 0) { 376 log(LOG_WARNING, "dhu%d: silo overflow\n", dhu); 377 overrun = 1; 378 } 379 if (creg & DHU_RB_FE) 380 c |= TTY_FE; 381 382 (*linesw[tp->t_line].l_rint)(c, tp); 383 } 384 } 385 386 /* 387 * Ioctl for DHU11. 388 */ 389 /*ARGSUSED*/ 390 dhuioctl(dev, cmd, data, flag) 391 caddr_t data; 392 { 393 register struct tty *tp; 394 register int unit = UNIT(dev); 395 int error; 396 397 tp = &dhu_tty[unit]; 398 error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag); 399 if (error >= 0) 400 return (error); 401 error = ttioctl(tp, cmd, data, flag); 402 if (error >= 0) 403 return (error); 404 405 switch (cmd) { 406 case TIOCSBRK: 407 (void) dhumctl(unit, DHU_BRK, DMBIS); 408 break; 409 410 case TIOCCBRK: 411 (void) dhumctl(unit, DHU_BRK, DMBIC); 412 break; 413 414 case TIOCSDTR: 415 (void) dhumctl(unit, DHU_DTR|DHU_RTS, DMBIS); 416 break; 417 418 case TIOCCDTR: 419 (void) dhumctl(unit, DHU_DTR|DHU_RTS, DMBIC); 420 break; 421 422 case TIOCMSET: 423 (void) dhumctl(dev, dmtodhu(*(int *)data), DMSET); 424 break; 425 426 case TIOCMBIS: 427 (void) dhumctl(dev, dmtodhu(*(int *)data), DMBIS); 428 break; 429 430 case TIOCMBIC: 431 (void) dhumctl(dev, dmtodhu(*(int *)data), DMBIC); 432 break; 433 434 case TIOCMGET: 435 *(int *)data = dhutodm(dhumctl(dev, 0, DMGET)); 436 break; 437 default: 438 return (ENOTTY); 439 } 440 return (0); 441 } 442 443 dmtodhu(bits) 444 register int bits; 445 { 446 register int b = 0; 447 448 if (bits & DML_RTS) b |= DHU_RTS; 449 if (bits & DML_DTR) b |= DHU_DTR; 450 if (bits & DML_LE) b |= DHU_LE; 451 return(b); 452 } 453 454 dhutodm(bits) 455 register int bits; 456 { 457 register int b = 0; 458 459 if (bits & DHU_DSR) b |= DML_DSR; 460 if (bits & DHU_RNG) b |= DML_RNG; 461 if (bits & DHU_CAR) b |= DML_CAR; 462 if (bits & DHU_CTS) b |= DML_CTS; 463 if (bits & DHU_RTS) b |= DML_RTS; 464 if (bits & DHU_DTR) b |= DML_DTR; 465 if (bits & DHU_LE) b |= DML_LE; 466 return(b); 467 } 468 469 470 /* 471 * Set parameters from open or stty into the DHU hardware 472 * registers. Impossible values for speed or character 473 * size are ignored and not copied back into tp. 474 */ 475 dhuparam(tp, want) 476 register struct tty *tp; 477 register struct termios *want; 478 { 479 register int unit = UNIT(tp->t_dev); 480 register struct dhudevice *addr = (struct dhudevice *)tp->t_addr; 481 register int lpar; 482 register long cflag; 483 register int incode, outcode; 484 int s; 485 486 /* 487 * Block interrupts so parameters will be set 488 * before the line interrupts. 489 */ 490 s = spltty(); 491 492 if (want->c_ospeed == 0) { 493 tp->t_ospeed = 0; 494 tp->t_cflag |= HUPCL; 495 (void)dhumctl(unit, DHU_OFF, DMSET); 496 splx(s); 497 return (0); 498 } 499 500 if ((outcode = ttspeedtab(want->c_ospeed, dhuspeedtab)) >= 0) 501 tp->t_ospeed = want->c_ospeed; 502 else 503 outcode = ttspeedtab(tp->t_ospeed, dhuspeedtab); 504 505 if (want->c_ispeed == 0) { 506 tp->t_ispeed = 0; 507 incode = outcode; 508 } else if ((incode = ttspeedtab(want->c_ispeed, dhuspeedtab)) >= 0) 509 tp->t_ispeed = want->c_ispeed; 510 else 511 incode = ttspeedtab(tp->t_ispeed, dhuspeedtab); 512 513 lpar = ((char)outcode<<12) | ((char)incode<<8); 514 515 switch (want->c_cflag&CSIZE) { 516 case CS6: case CS7: case CS8: 517 tp->t_cflag = want->c_cflag; 518 break; 519 default: 520 tp->t_cflag = (tp->t_cflag&CSIZE) | (want->c_cflag & ~CSIZE); 521 } 522 cflag = tp->t_cflag; 523 524 switch(cflag&CSIZE) { 525 case CS6: 526 lpar |= DHU_LP_BITS6; 527 break; 528 case CS7: 529 lpar |= DHU_LP_BITS7; 530 break; 531 case CS8: 532 lpar |= DHU_LP_BITS8; 533 break; 534 } 535 if (cflag&PARENB) { 536 lpar |= DHU_LP_PENABLE; 537 if ((cflag&PARODD) == 0) 538 lpar |= DHU_LP_EPAR; 539 } 540 if (cflag&CSTOPB) 541 lpar |= DHU_LP_TWOSB; 542 543 addr->dhucsr = DHU_SELECT(unit) | DHU_IE; 544 addr->dhulpr = lpar; 545 splx(s); 546 return (0); 547 } 548 549 /* 550 * DHU11 transmitter interrupt. 551 * Restart each line which used to be active but has 552 * terminated transmission since the last interrupt. 553 */ 554 dhuxint(dhu) 555 int dhu; 556 { 557 register struct tty *tp; 558 register struct dhudevice *addr; 559 register struct tty *tp0; 560 register struct uba_device *ui; 561 register int line, t; 562 u_short cntr; 563 564 #ifdef QBA 565 (void) spl5(); 566 #endif 567 ui = dhuinfo[dhu]; 568 tp0 = &dhu_tty[dhu<<4]; 569 addr = (struct dhudevice *)ui->ui_addr; 570 while ((t = addr->dhucsrh) & DHU_CSH_TI) { 571 line = DHU_TX_LINE(t); 572 tp = tp0 + line; 573 tp->t_state &= ~TS_BUSY; 574 if (t & DHU_CSH_NXM) { 575 printf("dhu(%d,%d): NXM fault\n", dhu, line); 576 /* SHOULD RESTART OR SOMETHING... */ 577 } 578 if (tp->t_state&TS_FLUSH) 579 tp->t_state &= ~TS_FLUSH; 580 else { 581 addr->dhucsrl = DHU_SELECT(line) | DHU_IE; 582 /* 583 * Do arithmetic in a short to make up 584 * for lost 16&17 bits. 585 */ 586 cntr = addr->dhubar1 - 587 UBACVT(tp->t_outq.c_cf, ui->ui_ubanum); 588 ndflush(&tp->t_outq, (int)cntr); 589 } 590 if (tp->t_line) 591 (*linesw[tp->t_line].l_start)(tp); 592 else 593 dhustart(tp); 594 } 595 } 596 597 /* 598 * Start (restart) transmission on the given DHU11 line. 599 */ 600 dhustart(tp) 601 register struct tty *tp; 602 { 603 register struct dhudevice *addr; 604 register int car, dhu, unit, nch; 605 int s; 606 607 unit = minor(tp->t_dev); 608 dhu = unit >> 4; 609 unit &= 0xf; 610 addr = (struct dhudevice *)tp->t_addr; 611 612 /* 613 * Must hold interrupts in following code to prevent 614 * state of the tp from changing. 615 */ 616 s = spl5(); 617 /* 618 * If it's currently active, or delaying, no need to do anything. 619 */ 620 if (tp->t_state&(TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) 621 goto out; 622 /* 623 * If there are sleepers, and output has drained below low 624 * water mark, wake up the sleepers.. 625 */ 626 if (tp->t_outq.c_cc <= tp->t_lowat) { 627 if (tp->t_state&TS_ASLEEP) { 628 tp->t_state &= ~TS_ASLEEP; 629 wakeup((caddr_t)&tp->t_outq); 630 } 631 if (tp->t_wsel) { 632 selwakeup(tp->t_wsel, tp->t_state & TS_WCOLL); 633 tp->t_wsel = 0; 634 tp->t_state &= ~TS_WCOLL; 635 } 636 } 637 /* 638 * Now restart transmission unless the output queue is 639 * empty. 640 */ 641 if (tp->t_outq.c_cc == 0) 642 goto out; 643 if (1 || !(tp->t_oflag & OPOST)) /*XXX*/ 644 nch = ndqb(&tp->t_outq, 0); 645 else { 646 nch = ndqb(&tp->t_outq, 0200); 647 /* 648 * If first thing on queue is a delay process it. 649 */ 650 if (nch == 0) { 651 nch = getc(&tp->t_outq); 652 timeout(ttrstrt, (caddr_t)tp, (nch&0x7f)+6); 653 tp->t_state |= TS_TIMEOUT; 654 goto out; 655 } 656 } 657 /* 658 * If characters to transmit, restart transmission. 659 */ 660 if (nch) { 661 car = UBACVT(tp->t_outq.c_cf, dhuinfo[dhu]->ui_ubanum); 662 addr->dhucsrl = DHU_SELECT(unit) | DHU_IE; 663 addr->dhulcr &= ~DHU_LC_TXABORT; 664 addr->dhubcr = nch; 665 addr->dhubar1 = car; 666 addr->dhubar2 = ((car >> DHU_XBA_SHIFT) & DHU_BA2_XBA) | 667 DHU_BA2_DMAGO; 668 tp->t_state |= TS_BUSY; 669 } 670 out: 671 splx(s); 672 } 673 674 /* 675 * Stop output on a line, e.g. for ^S/^Q or output flush. 676 */ 677 /*ARGSUSED*/ 678 dhustop(tp, flag) 679 register struct tty *tp; 680 { 681 register struct dhudevice *addr; 682 register int unit, s; 683 684 addr = (struct dhudevice *)tp->t_addr; 685 /* 686 * Block input/output interrupts while messing with state. 687 */ 688 s = spl5(); 689 if (tp->t_state & TS_BUSY) { 690 /* 691 * Device is transmitting; stop output 692 * by selecting the line and setting the 693 * abort xmit bit. We will get an xmit interrupt, 694 * where we will figure out where to continue the 695 * next time the transmitter is enabled. If 696 * TS_FLUSH is set, the outq will be flushed. 697 * In either case, dhustart will clear the TXABORT bit. 698 */ 699 unit = minor(tp->t_dev); 700 addr->dhucsrl = DHU_SELECT(unit) | DHU_IE; 701 addr->dhulcr |= DHU_LC_TXABORT; 702 if ((tp->t_state&TS_TTSTOP)==0) 703 tp->t_state |= TS_FLUSH; 704 } 705 (void) splx(s); 706 } 707 708 /* 709 * DHU11 modem control 710 */ 711 dhumctl(dev, bits, how) 712 dev_t dev; 713 int bits, how; 714 { 715 register struct dhudevice *dhuaddr; 716 register int unit, mbits; 717 int s; 718 719 unit = UNIT(dev); 720 dhuaddr = (struct dhudevice *)(dhu_tty[unit].t_addr); 721 unit &= 0xf; 722 s = spl5(); 723 dhuaddr->dhucsr = DHU_SELECT(unit) | DHU_IE; 724 /* 725 * combine byte from stat register (read only, bits 16..23) 726 * with lcr register (read write, bits 0..15). 727 */ 728 mbits = dhuaddr->dhulcr | (dhuaddr->dhustat << 16); 729 switch (how) { 730 case DMSET: 731 mbits = (mbits & 0xff0000) | bits; 732 break; 733 734 case DMBIS: 735 mbits |= bits; 736 break; 737 738 case DMBIC: 739 mbits &= ~bits; 740 break; 741 742 case DMGET: 743 (void) splx(s); 744 return(mbits); 745 } 746 dhuaddr->dhulcr = (mbits & 0xffff) | DHU_LC_RXEN; 747 dhuaddr->dhulcr2 = DHU_LC2_TXEN; 748 (void) splx(s); 749 return(mbits); 750 } 751 752 /* 753 * Reset state of driver if UBA reset was necessary. 754 * Reset the line and modem control registers. 755 * restart transmitters. 756 */ 757 dhureset(uban) 758 int uban; 759 { 760 register int dhu, unit; 761 register struct tty *tp; 762 register struct uba_device *ui; 763 register struct dhudevice *addr; 764 int i; 765 766 for (dhu = 0; dhu < NDHU; dhu++) { 767 ui = dhuinfo[dhu]; 768 if (ui == 0 || ui->ui_alive == 0 || ui->ui_ubanum != uban) 769 continue; 770 printf(" dhu%d", dhu); 771 if (dhu_uballoc[uban] == dhu) { 772 int info; 773 774 info = uballoc(uban, (caddr_t)cfree, 775 nclist * sizeof(struct cblock), UBA_CANTWAIT); 776 if (info) 777 cbase[uban] = UBAI_ADDR(info); 778 else { 779 printf(" [can't get uba map]"); 780 cbase[uban] = -1; 781 } 782 } 783 addr = (struct dhudevice *)ui->ui_addr; 784 addr->dhucsr = DHU_SELECT(0) | DHU_IE; 785 addr->dhutimo = DHU_DEF_TIMO; 786 unit = dhu * 16; 787 for (i = 0; i < 16; i++) { 788 tp = &dhu_tty[unit]; 789 if (tp->t_state & (TS_ISOPEN|TS_WOPEN)) { 790 dhuparam(tp, &tp->t_termios); 791 (void)dhumctl(unit, DHU_ON, DMSET); 792 tp->t_state &= ~TS_BUSY; 793 dhustart(tp); 794 } 795 unit++; 796 } 797 } 798 } 799 #endif 800