1.\" Copyright (c) 1988, 1991 The Regents of the University of California. 2.\" All rights reserved. 3.\" 4.\" %sccs.include.redist.man% 5.\" 6.\" @(#)sendmail.8 6.8 (Berkeley) 07/25/91 7.\" 8.Dd 9.Dt SENDMAIL 8 10.Os BSD 4 11.Sh NAME 12.Nm sendmail 13.Nd send mail over the internet 14.Sh SYNOPSIS 15.Nm sendmail 16.Op Ar flags 17.Op Ar address ... 18.Nm newaliases 19.Nm mailq 20.Op Fl v 21.Sh DESCRIPTION 22.Nm Sendmail 23sends a message to one or more 24.Em recipients , 25routing the message over whatever networks 26are necessary. 27.Nm Sendmail 28does internetwork forwarding as necessary 29to deliver the message to the correct place. 30.Pp 31.Nm Sendmail 32is not intended as a user interface routine; 33other programs provide user-friendly 34front ends; 35.Nm sendmail 36is used only to deliver pre-formatted messages. 37.Pp 38With no flags, 39.Nm sendmail 40reads its standard input 41up to an end-of-file 42or a line consisting only of a single dot 43and sends a copy of the message found there 44to all of the addresses listed. 45It determines the network(s) to use 46based on the syntax and contents of the addresses. 47.Pp 48Local addresses are looked up in a file 49and aliased appropriately. 50Aliasing can be prevented by preceding the address 51with a backslash. 52Normally the sender is not included in any alias 53expansions, e.g., 54if `john' sends to `group', 55and `group' includes `john' in the expansion, 56then the letter will not be delivered to `john'. 57.Pp 58Flags are: 59.Bl -tag -width Fl 60.It Fl ba 61Go into 62.Tn ARPANET 63mode. 64All input lines must end with a CR-LF, 65and all messages will be generated with a CR-LF at the end. 66Also, 67the ``From:'' and ``Sender:'' 68fields are examined for the name of the sender. 69.It Fl bd 70Run as a daemon. This requires Berkeley 71.Tn IPC . 72.Nm Sendmail 73will fork and run in background 74listening on socket 25 for incoming 75.Tn SMTP 76connections. 77This is normally run from 78.Pa /etc/rc . 79.It Fl bi 80Initialize the alias database. 81.It Fl bm 82Deliver mail in the usual way (default). 83.It Fl bp 84Print a listing of the queue. 85.It Fl bs 86Use the 87.Tn SMTP 88protocol as described in 89.Tn RFC821 90on standard input and output. 91This flag implies all the operations of the 92.Fl ba 93flag that are compatible with 94.Tn SMTP . 95.It Fl bt 96Run in address test mode. 97This mode reads addresses and shows the steps in parsing; 98it is used for debugging configuration tables. 99.It Fl bv 100Verify names only \- do not try to collect or deliver a message. 101Verify mode is normally used for validating 102users or mailing lists. 103.It Fl bz 104Create the configuration freeze file. 105.It Fl C Ns Ar file 106Use alternate configuration file. 107.Nm Sendmail 108refuses to run as root if an alternate configuration file is specified. 109The frozen configuration file is bypassed. 110.It Fl d Ns Ar X 111Set debugging value to 112.Ar X . 113.It Fl F Ns Ar fullname 114Set the full name of the sender. 115.It Fl f Ns Ar name 116Sets the name of the ``from'' person 117(i.e., the sender of the mail). 118.Fl f 119can only be used 120by ``trusted'' users 121(normally 122.Em root , 123.Em daemon , 124and 125.Em network ) 126or if the person you are trying to become 127is the same as the person you are. 128.It Fl h Ns Ar N 129Set the hop count to 130.Ar N . 131The hop count is incremented every time the mail is 132processed. 133When it reaches a limit, 134the mail is returned with an error message, 135the victim of an aliasing loop. 136If not specified, 137``Received:'' lines in the message are counted. 138.It Fl n 139Don't do aliasing. 140.It Fl o Ns Ar x Em value 141Set option 142.Ar x 143to the specified 144.Em value . 145Options are described below. 146.It Fl q Ns Bq Ar time 147Processed saved messages in the queue at given intervals. 148If 149.Ar time 150is omitted, 151process the queue once. 152.Xr Time 153is given as a tagged number, 154with 155.Ql s 156being seconds, 157.Ql m 158being minutes, 159.Ql h 160being hours, 161.Ql d 162being days, 163and 164.Ql w 165being weeks. 166For example, 167.Ql \-q1h30m 168or 169.Ql \-q90m 170would both set the timeout to one hour thirty minutes. 171If 172.Ar time 173is specified, 174.Nm sendmail 175will run in background. 176This option can be used safely with 177.Fl bd . 178.It Fl r Ns Ar name 179An alternate and obsolete form of the 180.Fl f 181flag. 182.It Fl t 183Read message for recipients. 184To:, Cc:, and Bcc: lines will be scanned for recipient addresses. 185The Bcc: line will be deleted before transmission. 186Any addresses in the argument list will be suppressed, 187that is, 188they will 189.Em not 190receive copies even if listed in the message header. 191.It Fl v 192Go into verbose mode. 193Alias expansions will be announced, etc. 194.El 195.Pp 196There are also a number of processing options that may be set. 197Normally these will only be used by a system administrator. 198Options may be set either on the command line 199using the 200.Fl o 201flag 202or in the configuration file. 203These are described in detail in the 204.%T "Sendmail Installation and Operation Guide" . 205The options are: 206.Bl -tag -width Fl 207.It Li A Ns Ar file 208Use alternate alias file. 209.It Li c 210On mailers that are considered ``expensive'' to connect to, 211don't initiate immediate connection. 212This requires queueing. 213.It Li d Ns Ar x 214Set the delivery mode to 215.Ar x . 216Delivery modes are 217.Ql i 218for interactive (synchronous) delivery, 219.Ql b 220for background (asynchronous) delivery, 221and 222.Ql q 223for queue only \- i.e., 224actual delivery is done the next time the queue is run. 225.It Li D 226Try to automatically rebuild the alias database 227if necessary. 228.It Li e Ns Ar x 229Set error processing to mode 230.Ar x . 231Valid modes are 232.Ql m 233to mail back the error message, 234.Ql w 235to ``write'' back the error message 236(or mail it back if the sender is not logged in), 237.Ql p 238to print the errors on the terminal 239(default), 240.Ql q 241to throw away error messages 242(only exit status is returned), 243and 244.Ql e 245to do special processing for the BerkNet. 246If the text of the message is not mailed back 247by 248modes 249.Ql m 250or 251.Ql w 252and if the sender is local to this machine, 253a copy of the message is appended to the file 254.Pa dead.letter 255in the sender's home directory. 256.It Li F Ns Ar mode 257The mode to use when creating temporary files. 258.It Li f 259Save 260.Tn UNIX Ns \-style 261From lines at the front of messages. 262.It Li g Ar N 263The default group id to use when calling mailers. 264.It Li H Ns Ar file 265The 266.Tn SMTP 267help file. 268.It Li i 269Do not take dots on a line by themselves 270as a message terminator. 271.It Li k Ar N 272Checkpoint the queue file after every 273.Ar N 274successful deliveries (default 10). 275This avoids excessive duplicate deliveries 276when sending to long mailing lists 277interrupted by system crashes. 278.It Li L Ns Ar n 279The log level. 280.It Li m 281Send to ``me'' (the sender) also if I am in an alias expansion. 282.It Li o 283If set, this message may have 284old style headers. 285If not set, 286this message is guaranteed to have new style headers 287(i.e., commas instead of spaces between addresses). 288If set, an adaptive algorithm is used that will correctly 289determine the header format in most cases. 290.It Li Q Ns Ar queuedir 291Select the directory in which to queue messages. 292.It Li r Ns Ar timeout 293The timeout on reads; 294if none is set, 295.Nm sendmail 296will wait forever for a mailer. 297This option violates the word (if not the intent) of the 298.Tn SMTP 299specification, 300show the timeout should probably be fairly large. 301.It Li S Ns Ar file 302Save statistics in the named file. 303.It Li s 304Always instantiate the queue file, 305even under circumstances where it is not strictly necessary. 306This provides safety against system crashes during delivery. 307.It Li T Ns Ar time 308Set the timeout on undelivered messages in the queue to the specified time. 309After delivery has failed 310(e.g., because of a host being down) 311for this amount of time, 312failed messages will be returned to the sender. 313The default is three days. 314.It Li t Ns Ar stz , Ar dtz 315Set the name of the time zone. 316.It Li u Ns Ar N 317Set the default user id for mailers. 318.It Li w 319If not set, name server lookups will us a querytype of ANY 320to find types 321CNAME, A, and MX, 322and will cause all existing records to be cached by our local server. 323If there is (might be) a wildcard MX in the local domain 324or its parents that are searched, you 325.ul 326must 327set this option, which will use a querytype of CNAME only; 328otherwise, it would cause all fully-qualified names 329to match as names in the local domain. 330.El 331.Pp 332In aliases, 333the first character of a name may be 334a vertical bar to cause interpretation of 335the rest of the name as a command 336to pipe the mail to. 337It may be necessary to quote the name 338to keep 339.Nm sendmail 340from suppressing the blanks from between arguments. 341For example, a common alias is: 342.Pp 343.Bd -literal -offset indent -compact 344msgs: "|/usr/bin/msgs -s" 345.Ed 346.Pp 347Aliases may also have the syntax 348.Dq :include: Ns Ar filename 349to ask 350.Xr sendmail 351to read the named file for a list of recipients. 352For example, an alias such as: 353.Pp 354.Bd -literal -offset indent -compact 355poets: ":include:/usr/local/lib/poets.list" 356.Ed 357.Pp 358would read 359.Pa /usr/local/lib/poets.list 360for the list of addresses making up the group. 361.Pp 362.Nm Sendmail 363returns an exit status 364describing what it did. 365The codes are defined in 366.Aq Pa sysexits.h : 367.Bl -tag -width EX_UNAVAILABLE -compact -offset indent 368.It Dv EX_OK 369Successful completion on all addresses. 370.It Dv EX_NOUSER 371User name not recognized. 372.It Dv EX_UNAVAILABLE 373Catchall meaning necessary resources 374were not available. 375.It Dv EX_SYNTAX 376Syntax error in address. 377.It Dv EX_SOFTWARE 378Internal software error, 379including bad arguments. 380.It Dv EX_OSERR 381Temporary operating system error, 382such as 383.Dq cannot fork . 384.It Dv EX_NOHOST 385Host name not recognized. 386.It Dv EX_TEMPFAIL 387Message could not be sent immediately, 388but was queued. 389.El 390.Pp 391If invoked as 392.Nm newaliases , 393.Nm sendmail 394will rebuild the alias database. 395If invoked as 396.Nm mailq , 397.Nm sendmail 398will print the contents of the mail queue. 399.Sh FILES 400Except for the file 401.Pa /etc/sendmail.cf 402itself, 403the following pathnames are all specified in 404.Pa /etc/sendmail.cf. 405Thus, 406these values are only approximations. 407.Pp 408.Bl -tag -width /usr/lib/sendmail.fc -compact 409.It Pa /etc/aliases 410raw data for alias names 411.It Pa /etc/aliases.pag 412.It Pa /etc/aliases.dir 413data base of alias names 414.It Pa /etc/sendmail.cf 415configuration file 416.It Pa /etc/sendmail.fc 417frozen configuration 418.It Pa /etc/sendmail.hf 419help file 420.It Pa /var/log/sendmail.st 421collected statistics 422.It Pa /var/spool/mqueue/* 423temp files 424.El 425.Sh SEE ALSO 426.Xr binmail 1 , 427.Xr mail 1 , 428.Xr rmail 1 , 429.Xr syslog 3 , 430.Xr aliases 5 , 431.Xr mailaddr 7 , 432.Xr rc 8 ; 433.Pp 434DARPA 435Internet Request For Comments 436.%T RFC819 , 437.%T RFC821 , 438.%T RFC822 . 439.Rs 440.%T "Sendmail \- An Internetwork Mail Router" 441.%V SMM 442.%N \&No. 9 443.Re 444.Rs 445.%T "Sendmail Installation and Operation Guide" 446.%V SMM 447.%N \&No. 8 448.Re 449.Sh HISTORY 450The 451.Nm 452command appeared in 453.Bx 4.2 . 454