xref: /qemu/block.c (revision 69dd62df)
1 /*
2  * QEMU System Emulator block driver
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 
38 #ifdef CONFIG_BSD
39 #include <sys/types.h>
40 #include <sys/stat.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
43 #ifndef __DragonFly__
44 #include <sys/disk.h>
45 #endif
46 #endif
47 
48 #ifdef _WIN32
49 #include <windows.h>
50 #endif
51 
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
53 
54 typedef enum {
55     BDRV_REQ_COPY_ON_READ = 0x1,
56     BDRV_REQ_ZERO_WRITE   = 0x2,
57 } BdrvRequestFlags;
58 
59 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
60 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
61         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
62         BlockDriverCompletionFunc *cb, void *opaque);
63 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
64         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
65         BlockDriverCompletionFunc *cb, void *opaque);
66 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
67                                          int64_t sector_num, int nb_sectors,
68                                          QEMUIOVector *iov);
69 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
70                                          int64_t sector_num, int nb_sectors,
71                                          QEMUIOVector *iov);
72 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
73     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
74     BdrvRequestFlags flags);
75 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
76     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
77     BdrvRequestFlags flags);
78 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
79                                                int64_t sector_num,
80                                                QEMUIOVector *qiov,
81                                                int nb_sectors,
82                                                BlockDriverCompletionFunc *cb,
83                                                void *opaque,
84                                                bool is_write);
85 static void coroutine_fn bdrv_co_do_rw(void *opaque);
86 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
87     int64_t sector_num, int nb_sectors);
88 
89 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
90         bool is_write, double elapsed_time, uint64_t *wait);
91 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
92         double elapsed_time, uint64_t *wait);
93 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
94         bool is_write, int64_t *wait);
95 
96 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
97     QTAILQ_HEAD_INITIALIZER(bdrv_states);
98 
99 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
100     QLIST_HEAD_INITIALIZER(bdrv_drivers);
101 
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist;
104 
105 #ifdef _WIN32
106 static int is_windows_drive_prefix(const char *filename)
107 {
108     return (((filename[0] >= 'a' && filename[0] <= 'z') ||
109              (filename[0] >= 'A' && filename[0] <= 'Z')) &&
110             filename[1] == ':');
111 }
112 
113 int is_windows_drive(const char *filename)
114 {
115     if (is_windows_drive_prefix(filename) &&
116         filename[2] == '\0')
117         return 1;
118     if (strstart(filename, "\\\\.\\", NULL) ||
119         strstart(filename, "//./", NULL))
120         return 1;
121     return 0;
122 }
123 #endif
124 
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState *bs)
127 {
128     bs->io_limits_enabled = false;
129 
130     while (qemu_co_queue_next(&bs->throttled_reqs));
131 
132     if (bs->block_timer) {
133         qemu_del_timer(bs->block_timer);
134         qemu_free_timer(bs->block_timer);
135         bs->block_timer = NULL;
136     }
137 
138     bs->slice_start = 0;
139     bs->slice_end   = 0;
140 }
141 
142 static void bdrv_block_timer(void *opaque)
143 {
144     BlockDriverState *bs = opaque;
145 
146     qemu_co_queue_next(&bs->throttled_reqs);
147 }
148 
149 void bdrv_io_limits_enable(BlockDriverState *bs)
150 {
151     qemu_co_queue_init(&bs->throttled_reqs);
152     bs->block_timer = qemu_new_timer_ns(vm_clock, bdrv_block_timer, bs);
153     bs->io_limits_enabled = true;
154 }
155 
156 bool bdrv_io_limits_enabled(BlockDriverState *bs)
157 {
158     BlockIOLimit *io_limits = &bs->io_limits;
159     return io_limits->bps[BLOCK_IO_LIMIT_READ]
160          || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
161          || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
162          || io_limits->iops[BLOCK_IO_LIMIT_READ]
163          || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
164          || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
165 }
166 
167 static void bdrv_io_limits_intercept(BlockDriverState *bs,
168                                      bool is_write, int nb_sectors)
169 {
170     int64_t wait_time = -1;
171 
172     if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
173         qemu_co_queue_wait(&bs->throttled_reqs);
174     }
175 
176     /* In fact, we hope to keep each request's timing, in FIFO mode. The next
177      * throttled requests will not be dequeued until the current request is
178      * allowed to be serviced. So if the current request still exceeds the
179      * limits, it will be inserted to the head. All requests followed it will
180      * be still in throttled_reqs queue.
181      */
182 
183     while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
184         qemu_mod_timer(bs->block_timer,
185                        wait_time + qemu_get_clock_ns(vm_clock));
186         qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
187     }
188 
189     qemu_co_queue_next(&bs->throttled_reqs);
190 }
191 
192 /* check if the path starts with "<protocol>:" */
193 static int path_has_protocol(const char *path)
194 {
195     const char *p;
196 
197 #ifdef _WIN32
198     if (is_windows_drive(path) ||
199         is_windows_drive_prefix(path)) {
200         return 0;
201     }
202     p = path + strcspn(path, ":/\\");
203 #else
204     p = path + strcspn(path, ":/");
205 #endif
206 
207     return *p == ':';
208 }
209 
210 int path_is_absolute(const char *path)
211 {
212 #ifdef _WIN32
213     /* specific case for names like: "\\.\d:" */
214     if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
215         return 1;
216     }
217     return (*path == '/' || *path == '\\');
218 #else
219     return (*path == '/');
220 #endif
221 }
222 
223 /* if filename is absolute, just copy it to dest. Otherwise, build a
224    path to it by considering it is relative to base_path. URL are
225    supported. */
226 void path_combine(char *dest, int dest_size,
227                   const char *base_path,
228                   const char *filename)
229 {
230     const char *p, *p1;
231     int len;
232 
233     if (dest_size <= 0)
234         return;
235     if (path_is_absolute(filename)) {
236         pstrcpy(dest, dest_size, filename);
237     } else {
238         p = strchr(base_path, ':');
239         if (p)
240             p++;
241         else
242             p = base_path;
243         p1 = strrchr(base_path, '/');
244 #ifdef _WIN32
245         {
246             const char *p2;
247             p2 = strrchr(base_path, '\\');
248             if (!p1 || p2 > p1)
249                 p1 = p2;
250         }
251 #endif
252         if (p1)
253             p1++;
254         else
255             p1 = base_path;
256         if (p1 > p)
257             p = p1;
258         len = p - base_path;
259         if (len > dest_size - 1)
260             len = dest_size - 1;
261         memcpy(dest, base_path, len);
262         dest[len] = '\0';
263         pstrcat(dest, dest_size, filename);
264     }
265 }
266 
267 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
268 {
269     if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
270         pstrcpy(dest, sz, bs->backing_file);
271     } else {
272         path_combine(dest, sz, bs->filename, bs->backing_file);
273     }
274 }
275 
276 void bdrv_register(BlockDriver *bdrv)
277 {
278     /* Block drivers without coroutine functions need emulation */
279     if (!bdrv->bdrv_co_readv) {
280         bdrv->bdrv_co_readv = bdrv_co_readv_em;
281         bdrv->bdrv_co_writev = bdrv_co_writev_em;
282 
283         /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
284          * the block driver lacks aio we need to emulate that too.
285          */
286         if (!bdrv->bdrv_aio_readv) {
287             /* add AIO emulation layer */
288             bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
289             bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
290         }
291     }
292 
293     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
294 }
295 
296 /* create a new block device (by default it is empty) */
297 BlockDriverState *bdrv_new(const char *device_name)
298 {
299     BlockDriverState *bs;
300 
301     bs = g_malloc0(sizeof(BlockDriverState));
302     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
303     if (device_name[0] != '\0') {
304         QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
305     }
306     bdrv_iostatus_disable(bs);
307     notifier_list_init(&bs->close_notifiers);
308     notifier_with_return_list_init(&bs->before_write_notifiers);
309 
310     return bs;
311 }
312 
313 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
314 {
315     notifier_list_add(&bs->close_notifiers, notify);
316 }
317 
318 BlockDriver *bdrv_find_format(const char *format_name)
319 {
320     BlockDriver *drv1;
321     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
322         if (!strcmp(drv1->format_name, format_name)) {
323             return drv1;
324         }
325     }
326     return NULL;
327 }
328 
329 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
330 {
331     static const char *whitelist_rw[] = {
332         CONFIG_BDRV_RW_WHITELIST
333     };
334     static const char *whitelist_ro[] = {
335         CONFIG_BDRV_RO_WHITELIST
336     };
337     const char **p;
338 
339     if (!whitelist_rw[0] && !whitelist_ro[0]) {
340         return 1;               /* no whitelist, anything goes */
341     }
342 
343     for (p = whitelist_rw; *p; p++) {
344         if (!strcmp(drv->format_name, *p)) {
345             return 1;
346         }
347     }
348     if (read_only) {
349         for (p = whitelist_ro; *p; p++) {
350             if (!strcmp(drv->format_name, *p)) {
351                 return 1;
352             }
353         }
354     }
355     return 0;
356 }
357 
358 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
359                                           bool read_only)
360 {
361     BlockDriver *drv = bdrv_find_format(format_name);
362     return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
363 }
364 
365 typedef struct CreateCo {
366     BlockDriver *drv;
367     char *filename;
368     QEMUOptionParameter *options;
369     int ret;
370 } CreateCo;
371 
372 static void coroutine_fn bdrv_create_co_entry(void *opaque)
373 {
374     CreateCo *cco = opaque;
375     assert(cco->drv);
376 
377     cco->ret = cco->drv->bdrv_create(cco->filename, cco->options);
378 }
379 
380 int bdrv_create(BlockDriver *drv, const char* filename,
381     QEMUOptionParameter *options)
382 {
383     int ret;
384 
385     Coroutine *co;
386     CreateCo cco = {
387         .drv = drv,
388         .filename = g_strdup(filename),
389         .options = options,
390         .ret = NOT_DONE,
391     };
392 
393     if (!drv->bdrv_create) {
394         ret = -ENOTSUP;
395         goto out;
396     }
397 
398     if (qemu_in_coroutine()) {
399         /* Fast-path if already in coroutine context */
400         bdrv_create_co_entry(&cco);
401     } else {
402         co = qemu_coroutine_create(bdrv_create_co_entry);
403         qemu_coroutine_enter(co, &cco);
404         while (cco.ret == NOT_DONE) {
405             qemu_aio_wait();
406         }
407     }
408 
409     ret = cco.ret;
410 
411 out:
412     g_free(cco.filename);
413     return ret;
414 }
415 
416 int bdrv_create_file(const char* filename, QEMUOptionParameter *options)
417 {
418     BlockDriver *drv;
419 
420     drv = bdrv_find_protocol(filename, true);
421     if (drv == NULL) {
422         return -ENOENT;
423     }
424 
425     return bdrv_create(drv, filename, options);
426 }
427 
428 /*
429  * Create a uniquely-named empty temporary file.
430  * Return 0 upon success, otherwise a negative errno value.
431  */
432 int get_tmp_filename(char *filename, int size)
433 {
434 #ifdef _WIN32
435     char temp_dir[MAX_PATH];
436     /* GetTempFileName requires that its output buffer (4th param)
437        have length MAX_PATH or greater.  */
438     assert(size >= MAX_PATH);
439     return (GetTempPath(MAX_PATH, temp_dir)
440             && GetTempFileName(temp_dir, "qem", 0, filename)
441             ? 0 : -GetLastError());
442 #else
443     int fd;
444     const char *tmpdir;
445     tmpdir = getenv("TMPDIR");
446     if (!tmpdir)
447         tmpdir = "/tmp";
448     if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
449         return -EOVERFLOW;
450     }
451     fd = mkstemp(filename);
452     if (fd < 0) {
453         return -errno;
454     }
455     if (close(fd) != 0) {
456         unlink(filename);
457         return -errno;
458     }
459     return 0;
460 #endif
461 }
462 
463 /*
464  * Detect host devices. By convention, /dev/cdrom[N] is always
465  * recognized as a host CDROM.
466  */
467 static BlockDriver *find_hdev_driver(const char *filename)
468 {
469     int score_max = 0, score;
470     BlockDriver *drv = NULL, *d;
471 
472     QLIST_FOREACH(d, &bdrv_drivers, list) {
473         if (d->bdrv_probe_device) {
474             score = d->bdrv_probe_device(filename);
475             if (score > score_max) {
476                 score_max = score;
477                 drv = d;
478             }
479         }
480     }
481 
482     return drv;
483 }
484 
485 BlockDriver *bdrv_find_protocol(const char *filename,
486                                 bool allow_protocol_prefix)
487 {
488     BlockDriver *drv1;
489     char protocol[128];
490     int len;
491     const char *p;
492 
493     /* TODO Drivers without bdrv_file_open must be specified explicitly */
494 
495     /*
496      * XXX(hch): we really should not let host device detection
497      * override an explicit protocol specification, but moving this
498      * later breaks access to device names with colons in them.
499      * Thanks to the brain-dead persistent naming schemes on udev-
500      * based Linux systems those actually are quite common.
501      */
502     drv1 = find_hdev_driver(filename);
503     if (drv1) {
504         return drv1;
505     }
506 
507     if (!path_has_protocol(filename) || !allow_protocol_prefix) {
508         return bdrv_find_format("file");
509     }
510 
511     p = strchr(filename, ':');
512     assert(p != NULL);
513     len = p - filename;
514     if (len > sizeof(protocol) - 1)
515         len = sizeof(protocol) - 1;
516     memcpy(protocol, filename, len);
517     protocol[len] = '\0';
518     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
519         if (drv1->protocol_name &&
520             !strcmp(drv1->protocol_name, protocol)) {
521             return drv1;
522         }
523     }
524     return NULL;
525 }
526 
527 static int find_image_format(BlockDriverState *bs, const char *filename,
528                              BlockDriver **pdrv)
529 {
530     int score, score_max;
531     BlockDriver *drv1, *drv;
532     uint8_t buf[2048];
533     int ret = 0;
534 
535     /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
536     if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
537         drv = bdrv_find_format("raw");
538         if (!drv) {
539             ret = -ENOENT;
540         }
541         *pdrv = drv;
542         return ret;
543     }
544 
545     ret = bdrv_pread(bs, 0, buf, sizeof(buf));
546     if (ret < 0) {
547         *pdrv = NULL;
548         return ret;
549     }
550 
551     score_max = 0;
552     drv = NULL;
553     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
554         if (drv1->bdrv_probe) {
555             score = drv1->bdrv_probe(buf, ret, filename);
556             if (score > score_max) {
557                 score_max = score;
558                 drv = drv1;
559             }
560         }
561     }
562     if (!drv) {
563         ret = -ENOENT;
564     }
565     *pdrv = drv;
566     return ret;
567 }
568 
569 /**
570  * Set the current 'total_sectors' value
571  */
572 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
573 {
574     BlockDriver *drv = bs->drv;
575 
576     /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
577     if (bs->sg)
578         return 0;
579 
580     /* query actual device if possible, otherwise just trust the hint */
581     if (drv->bdrv_getlength) {
582         int64_t length = drv->bdrv_getlength(bs);
583         if (length < 0) {
584             return length;
585         }
586         hint = length >> BDRV_SECTOR_BITS;
587     }
588 
589     bs->total_sectors = hint;
590     return 0;
591 }
592 
593 /**
594  * Set open flags for a given discard mode
595  *
596  * Return 0 on success, -1 if the discard mode was invalid.
597  */
598 int bdrv_parse_discard_flags(const char *mode, int *flags)
599 {
600     *flags &= ~BDRV_O_UNMAP;
601 
602     if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
603         /* do nothing */
604     } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
605         *flags |= BDRV_O_UNMAP;
606     } else {
607         return -1;
608     }
609 
610     return 0;
611 }
612 
613 /**
614  * Set open flags for a given cache mode
615  *
616  * Return 0 on success, -1 if the cache mode was invalid.
617  */
618 int bdrv_parse_cache_flags(const char *mode, int *flags)
619 {
620     *flags &= ~BDRV_O_CACHE_MASK;
621 
622     if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
623         *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
624     } else if (!strcmp(mode, "directsync")) {
625         *flags |= BDRV_O_NOCACHE;
626     } else if (!strcmp(mode, "writeback")) {
627         *flags |= BDRV_O_CACHE_WB;
628     } else if (!strcmp(mode, "unsafe")) {
629         *flags |= BDRV_O_CACHE_WB;
630         *flags |= BDRV_O_NO_FLUSH;
631     } else if (!strcmp(mode, "writethrough")) {
632         /* this is the default */
633     } else {
634         return -1;
635     }
636 
637     return 0;
638 }
639 
640 /**
641  * The copy-on-read flag is actually a reference count so multiple users may
642  * use the feature without worrying about clobbering its previous state.
643  * Copy-on-read stays enabled until all users have called to disable it.
644  */
645 void bdrv_enable_copy_on_read(BlockDriverState *bs)
646 {
647     bs->copy_on_read++;
648 }
649 
650 void bdrv_disable_copy_on_read(BlockDriverState *bs)
651 {
652     assert(bs->copy_on_read > 0);
653     bs->copy_on_read--;
654 }
655 
656 static int bdrv_open_flags(BlockDriverState *bs, int flags)
657 {
658     int open_flags = flags | BDRV_O_CACHE_WB;
659 
660     /*
661      * Clear flags that are internal to the block layer before opening the
662      * image.
663      */
664     open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
665 
666     /*
667      * Snapshots should be writable.
668      */
669     if (bs->is_temporary) {
670         open_flags |= BDRV_O_RDWR;
671     }
672 
673     return open_flags;
674 }
675 
676 /*
677  * Common part for opening disk images and files
678  *
679  * Removes all processed options from *options.
680  */
681 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
682     QDict *options, int flags, BlockDriver *drv)
683 {
684     int ret, open_flags;
685     const char *filename;
686 
687     assert(drv != NULL);
688     assert(bs->file == NULL);
689     assert(options != NULL && bs->options != options);
690 
691     if (file != NULL) {
692         filename = file->filename;
693     } else {
694         filename = qdict_get_try_str(options, "filename");
695     }
696 
697     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
698 
699     /* bdrv_open() with directly using a protocol as drv. This layer is already
700      * opened, so assign it to bs (while file becomes a closed BlockDriverState)
701      * and return immediately. */
702     if (file != NULL && drv->bdrv_file_open) {
703         bdrv_swap(file, bs);
704         return 0;
705     }
706 
707     bs->open_flags = flags;
708     bs->buffer_alignment = 512;
709     open_flags = bdrv_open_flags(bs, flags);
710     bs->read_only = !(open_flags & BDRV_O_RDWR);
711 
712     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
713         return -ENOTSUP;
714     }
715 
716     assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
717     if (!bs->read_only && (flags & BDRV_O_COPY_ON_READ)) {
718         bdrv_enable_copy_on_read(bs);
719     }
720 
721     if (filename != NULL) {
722         pstrcpy(bs->filename, sizeof(bs->filename), filename);
723     } else {
724         bs->filename[0] = '\0';
725     }
726 
727     bs->drv = drv;
728     bs->opaque = g_malloc0(drv->instance_size);
729 
730     bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
731 
732     /* Open the image, either directly or using a protocol */
733     if (drv->bdrv_file_open) {
734         assert(file == NULL);
735         assert(drv->bdrv_parse_filename || filename != NULL);
736         ret = drv->bdrv_file_open(bs, options, open_flags);
737     } else {
738         if (file == NULL) {
739             qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't use '%s' as a "
740                           "block driver for the protocol level",
741                           drv->format_name);
742             ret = -EINVAL;
743             goto free_and_fail;
744         }
745         assert(file != NULL);
746         bs->file = file;
747         ret = drv->bdrv_open(bs, options, open_flags);
748     }
749 
750     if (ret < 0) {
751         goto free_and_fail;
752     }
753 
754     ret = refresh_total_sectors(bs, bs->total_sectors);
755     if (ret < 0) {
756         goto free_and_fail;
757     }
758 
759 #ifndef _WIN32
760     if (bs->is_temporary) {
761         assert(filename != NULL);
762         unlink(filename);
763     }
764 #endif
765     return 0;
766 
767 free_and_fail:
768     bs->file = NULL;
769     g_free(bs->opaque);
770     bs->opaque = NULL;
771     bs->drv = NULL;
772     return ret;
773 }
774 
775 /*
776  * Opens a file using a protocol (file, host_device, nbd, ...)
777  *
778  * options is a QDict of options to pass to the block drivers, or NULL for an
779  * empty set of options. The reference to the QDict belongs to the block layer
780  * after the call (even on failure), so if the caller intends to reuse the
781  * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
782  */
783 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
784                    QDict *options, int flags)
785 {
786     BlockDriverState *bs;
787     BlockDriver *drv;
788     const char *drvname;
789     bool allow_protocol_prefix = false;
790     int ret;
791 
792     /* NULL means an empty set of options */
793     if (options == NULL) {
794         options = qdict_new();
795     }
796 
797     bs = bdrv_new("");
798     bs->options = options;
799     options = qdict_clone_shallow(options);
800 
801     /* Fetch the file name from the options QDict if necessary */
802     if (!filename) {
803         filename = qdict_get_try_str(options, "filename");
804     } else if (filename && !qdict_haskey(options, "filename")) {
805         qdict_put(options, "filename", qstring_from_str(filename));
806         allow_protocol_prefix = true;
807     } else {
808         qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't specify 'file' and "
809                       "'filename' options at the same time");
810         ret = -EINVAL;
811         goto fail;
812     }
813 
814     /* Find the right block driver */
815     drvname = qdict_get_try_str(options, "driver");
816     if (drvname) {
817         drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
818         qdict_del(options, "driver");
819     } else if (filename) {
820         drv = bdrv_find_protocol(filename, allow_protocol_prefix);
821         if (!drv) {
822             qerror_report(ERROR_CLASS_GENERIC_ERROR, "Unknown protocol");
823         }
824     } else {
825         qerror_report(ERROR_CLASS_GENERIC_ERROR,
826                       "Must specify either driver or file");
827         drv = NULL;
828     }
829 
830     if (!drv) {
831         ret = -ENOENT;
832         goto fail;
833     }
834 
835     /* Parse the filename and open it */
836     if (drv->bdrv_parse_filename && filename) {
837         Error *local_err = NULL;
838         drv->bdrv_parse_filename(filename, options, &local_err);
839         if (error_is_set(&local_err)) {
840             qerror_report_err(local_err);
841             error_free(local_err);
842             ret = -EINVAL;
843             goto fail;
844         }
845         qdict_del(options, "filename");
846     } else if (!drv->bdrv_parse_filename && !filename) {
847         qerror_report(ERROR_CLASS_GENERIC_ERROR,
848                       "The '%s' block driver requires a file name",
849                       drv->format_name);
850         ret = -EINVAL;
851         goto fail;
852     }
853 
854     ret = bdrv_open_common(bs, NULL, options, flags, drv);
855     if (ret < 0) {
856         goto fail;
857     }
858 
859     /* Check if any unknown options were used */
860     if (qdict_size(options) != 0) {
861         const QDictEntry *entry = qdict_first(options);
862         qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block protocol '%s' doesn't "
863                       "support the option '%s'",
864                       drv->format_name, entry->key);
865         ret = -EINVAL;
866         goto fail;
867     }
868     QDECREF(options);
869 
870     bs->growable = 1;
871     *pbs = bs;
872     return 0;
873 
874 fail:
875     QDECREF(options);
876     if (!bs->drv) {
877         QDECREF(bs->options);
878     }
879     bdrv_delete(bs);
880     return ret;
881 }
882 
883 /*
884  * Opens the backing file for a BlockDriverState if not yet open
885  *
886  * options is a QDict of options to pass to the block drivers, or NULL for an
887  * empty set of options. The reference to the QDict is transferred to this
888  * function (even on failure), so if the caller intends to reuse the dictionary,
889  * it needs to use QINCREF() before calling bdrv_file_open.
890  */
891 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options)
892 {
893     char backing_filename[PATH_MAX];
894     int back_flags, ret;
895     BlockDriver *back_drv = NULL;
896 
897     if (bs->backing_hd != NULL) {
898         QDECREF(options);
899         return 0;
900     }
901 
902     /* NULL means an empty set of options */
903     if (options == NULL) {
904         options = qdict_new();
905     }
906 
907     bs->open_flags &= ~BDRV_O_NO_BACKING;
908     if (qdict_haskey(options, "file.filename")) {
909         backing_filename[0] = '\0';
910     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
911         QDECREF(options);
912         return 0;
913     }
914 
915     bs->backing_hd = bdrv_new("");
916     bdrv_get_full_backing_filename(bs, backing_filename,
917                                    sizeof(backing_filename));
918 
919     if (bs->backing_format[0] != '\0') {
920         back_drv = bdrv_find_format(bs->backing_format);
921     }
922 
923     /* backing files always opened read-only */
924     back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT);
925 
926     ret = bdrv_open(bs->backing_hd,
927                     *backing_filename ? backing_filename : NULL, options,
928                     back_flags, back_drv);
929     if (ret < 0) {
930         bdrv_delete(bs->backing_hd);
931         bs->backing_hd = NULL;
932         bs->open_flags |= BDRV_O_NO_BACKING;
933         return ret;
934     }
935     return 0;
936 }
937 
938 static void extract_subqdict(QDict *src, QDict **dst, const char *start)
939 {
940     const QDictEntry *entry, *next;
941     const char *p;
942 
943     *dst = qdict_new();
944     entry = qdict_first(src);
945 
946     while (entry != NULL) {
947         next = qdict_next(src, entry);
948         if (strstart(entry->key, start, &p)) {
949             qobject_incref(entry->value);
950             qdict_put_obj(*dst, p, entry->value);
951             qdict_del(src, entry->key);
952         }
953         entry = next;
954     }
955 }
956 
957 /*
958  * Opens a disk image (raw, qcow2, vmdk, ...)
959  *
960  * options is a QDict of options to pass to the block drivers, or NULL for an
961  * empty set of options. The reference to the QDict belongs to the block layer
962  * after the call (even on failure), so if the caller intends to reuse the
963  * dictionary, it needs to use QINCREF() before calling bdrv_open.
964  */
965 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
966               int flags, BlockDriver *drv)
967 {
968     int ret;
969     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
970     char tmp_filename[PATH_MAX + 1];
971     BlockDriverState *file = NULL;
972     QDict *file_options = NULL;
973 
974     /* NULL means an empty set of options */
975     if (options == NULL) {
976         options = qdict_new();
977     }
978 
979     bs->options = options;
980     options = qdict_clone_shallow(options);
981 
982     /* For snapshot=on, create a temporary qcow2 overlay */
983     if (flags & BDRV_O_SNAPSHOT) {
984         BlockDriverState *bs1;
985         int64_t total_size;
986         BlockDriver *bdrv_qcow2;
987         QEMUOptionParameter *create_options;
988         char backing_filename[PATH_MAX];
989 
990         if (qdict_size(options) != 0) {
991             error_report("Can't use snapshot=on with driver-specific options");
992             ret = -EINVAL;
993             goto fail;
994         }
995         assert(filename != NULL);
996 
997         /* if snapshot, we create a temporary backing file and open it
998            instead of opening 'filename' directly */
999 
1000         /* if there is a backing file, use it */
1001         bs1 = bdrv_new("");
1002         ret = bdrv_open(bs1, filename, NULL, 0, drv);
1003         if (ret < 0) {
1004             bdrv_delete(bs1);
1005             goto fail;
1006         }
1007         total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1008 
1009         bdrv_delete(bs1);
1010 
1011         ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1012         if (ret < 0) {
1013             goto fail;
1014         }
1015 
1016         /* Real path is meaningless for protocols */
1017         if (path_has_protocol(filename)) {
1018             snprintf(backing_filename, sizeof(backing_filename),
1019                      "%s", filename);
1020         } else if (!realpath(filename, backing_filename)) {
1021             ret = -errno;
1022             goto fail;
1023         }
1024 
1025         bdrv_qcow2 = bdrv_find_format("qcow2");
1026         create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1027                                                  NULL);
1028 
1029         set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1030         set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1031                              backing_filename);
1032         if (drv) {
1033             set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1034                 drv->format_name);
1035         }
1036 
1037         ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options);
1038         free_option_parameters(create_options);
1039         if (ret < 0) {
1040             goto fail;
1041         }
1042 
1043         filename = tmp_filename;
1044         drv = bdrv_qcow2;
1045         bs->is_temporary = 1;
1046     }
1047 
1048     /* Open image file without format layer */
1049     if (flags & BDRV_O_RDWR) {
1050         flags |= BDRV_O_ALLOW_RDWR;
1051     }
1052 
1053     extract_subqdict(options, &file_options, "file.");
1054 
1055     ret = bdrv_file_open(&file, filename, file_options,
1056                          bdrv_open_flags(bs, flags | BDRV_O_UNMAP));
1057     if (ret < 0) {
1058         goto fail;
1059     }
1060 
1061     /* Find the right image format driver */
1062     if (!drv) {
1063         ret = find_image_format(file, filename, &drv);
1064     }
1065 
1066     if (!drv) {
1067         goto unlink_and_fail;
1068     }
1069 
1070     /* Open the image */
1071     ret = bdrv_open_common(bs, file, options, flags, drv);
1072     if (ret < 0) {
1073         goto unlink_and_fail;
1074     }
1075 
1076     if (bs->file != file) {
1077         bdrv_delete(file);
1078         file = NULL;
1079     }
1080 
1081     /* If there is a backing file, use it */
1082     if ((flags & BDRV_O_NO_BACKING) == 0) {
1083         QDict *backing_options;
1084 
1085         extract_subqdict(options, &backing_options, "backing.");
1086         ret = bdrv_open_backing_file(bs, backing_options);
1087         if (ret < 0) {
1088             goto close_and_fail;
1089         }
1090     }
1091 
1092     /* Check if any unknown options were used */
1093     if (qdict_size(options) != 0) {
1094         const QDictEntry *entry = qdict_first(options);
1095         qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by "
1096             "device '%s' doesn't support the option '%s'",
1097             drv->format_name, bs->device_name, entry->key);
1098 
1099         ret = -EINVAL;
1100         goto close_and_fail;
1101     }
1102     QDECREF(options);
1103 
1104     if (!bdrv_key_required(bs)) {
1105         bdrv_dev_change_media_cb(bs, true);
1106     }
1107 
1108     /* throttling disk I/O limits */
1109     if (bs->io_limits_enabled) {
1110         bdrv_io_limits_enable(bs);
1111     }
1112 
1113     return 0;
1114 
1115 unlink_and_fail:
1116     if (file != NULL) {
1117         bdrv_delete(file);
1118     }
1119     if (bs->is_temporary) {
1120         unlink(filename);
1121     }
1122 fail:
1123     QDECREF(bs->options);
1124     QDECREF(options);
1125     bs->options = NULL;
1126     return ret;
1127 
1128 close_and_fail:
1129     bdrv_close(bs);
1130     QDECREF(options);
1131     return ret;
1132 }
1133 
1134 typedef struct BlockReopenQueueEntry {
1135      bool prepared;
1136      BDRVReopenState state;
1137      QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1138 } BlockReopenQueueEntry;
1139 
1140 /*
1141  * Adds a BlockDriverState to a simple queue for an atomic, transactional
1142  * reopen of multiple devices.
1143  *
1144  * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1145  * already performed, or alternatively may be NULL a new BlockReopenQueue will
1146  * be created and initialized. This newly created BlockReopenQueue should be
1147  * passed back in for subsequent calls that are intended to be of the same
1148  * atomic 'set'.
1149  *
1150  * bs is the BlockDriverState to add to the reopen queue.
1151  *
1152  * flags contains the open flags for the associated bs
1153  *
1154  * returns a pointer to bs_queue, which is either the newly allocated
1155  * bs_queue, or the existing bs_queue being used.
1156  *
1157  */
1158 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1159                                     BlockDriverState *bs, int flags)
1160 {
1161     assert(bs != NULL);
1162 
1163     BlockReopenQueueEntry *bs_entry;
1164     if (bs_queue == NULL) {
1165         bs_queue = g_new0(BlockReopenQueue, 1);
1166         QSIMPLEQ_INIT(bs_queue);
1167     }
1168 
1169     if (bs->file) {
1170         bdrv_reopen_queue(bs_queue, bs->file, flags);
1171     }
1172 
1173     bs_entry = g_new0(BlockReopenQueueEntry, 1);
1174     QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1175 
1176     bs_entry->state.bs = bs;
1177     bs_entry->state.flags = flags;
1178 
1179     return bs_queue;
1180 }
1181 
1182 /*
1183  * Reopen multiple BlockDriverStates atomically & transactionally.
1184  *
1185  * The queue passed in (bs_queue) must have been built up previous
1186  * via bdrv_reopen_queue().
1187  *
1188  * Reopens all BDS specified in the queue, with the appropriate
1189  * flags.  All devices are prepared for reopen, and failure of any
1190  * device will cause all device changes to be abandonded, and intermediate
1191  * data cleaned up.
1192  *
1193  * If all devices prepare successfully, then the changes are committed
1194  * to all devices.
1195  *
1196  */
1197 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1198 {
1199     int ret = -1;
1200     BlockReopenQueueEntry *bs_entry, *next;
1201     Error *local_err = NULL;
1202 
1203     assert(bs_queue != NULL);
1204 
1205     bdrv_drain_all();
1206 
1207     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1208         if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1209             error_propagate(errp, local_err);
1210             goto cleanup;
1211         }
1212         bs_entry->prepared = true;
1213     }
1214 
1215     /* If we reach this point, we have success and just need to apply the
1216      * changes
1217      */
1218     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1219         bdrv_reopen_commit(&bs_entry->state);
1220     }
1221 
1222     ret = 0;
1223 
1224 cleanup:
1225     QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1226         if (ret && bs_entry->prepared) {
1227             bdrv_reopen_abort(&bs_entry->state);
1228         }
1229         g_free(bs_entry);
1230     }
1231     g_free(bs_queue);
1232     return ret;
1233 }
1234 
1235 
1236 /* Reopen a single BlockDriverState with the specified flags. */
1237 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1238 {
1239     int ret = -1;
1240     Error *local_err = NULL;
1241     BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1242 
1243     ret = bdrv_reopen_multiple(queue, &local_err);
1244     if (local_err != NULL) {
1245         error_propagate(errp, local_err);
1246     }
1247     return ret;
1248 }
1249 
1250 
1251 /*
1252  * Prepares a BlockDriverState for reopen. All changes are staged in the
1253  * 'opaque' field of the BDRVReopenState, which is used and allocated by
1254  * the block driver layer .bdrv_reopen_prepare()
1255  *
1256  * bs is the BlockDriverState to reopen
1257  * flags are the new open flags
1258  * queue is the reopen queue
1259  *
1260  * Returns 0 on success, non-zero on error.  On error errp will be set
1261  * as well.
1262  *
1263  * On failure, bdrv_reopen_abort() will be called to clean up any data.
1264  * It is the responsibility of the caller to then call the abort() or
1265  * commit() for any other BDS that have been left in a prepare() state
1266  *
1267  */
1268 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1269                         Error **errp)
1270 {
1271     int ret = -1;
1272     Error *local_err = NULL;
1273     BlockDriver *drv;
1274 
1275     assert(reopen_state != NULL);
1276     assert(reopen_state->bs->drv != NULL);
1277     drv = reopen_state->bs->drv;
1278 
1279     /* if we are to stay read-only, do not allow permission change
1280      * to r/w */
1281     if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1282         reopen_state->flags & BDRV_O_RDWR) {
1283         error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1284                   reopen_state->bs->device_name);
1285         goto error;
1286     }
1287 
1288 
1289     ret = bdrv_flush(reopen_state->bs);
1290     if (ret) {
1291         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1292                   strerror(-ret));
1293         goto error;
1294     }
1295 
1296     if (drv->bdrv_reopen_prepare) {
1297         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1298         if (ret) {
1299             if (local_err != NULL) {
1300                 error_propagate(errp, local_err);
1301             } else {
1302                 error_setg(errp, "failed while preparing to reopen image '%s'",
1303                            reopen_state->bs->filename);
1304             }
1305             goto error;
1306         }
1307     } else {
1308         /* It is currently mandatory to have a bdrv_reopen_prepare()
1309          * handler for each supported drv. */
1310         error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1311                   drv->format_name, reopen_state->bs->device_name,
1312                  "reopening of file");
1313         ret = -1;
1314         goto error;
1315     }
1316 
1317     ret = 0;
1318 
1319 error:
1320     return ret;
1321 }
1322 
1323 /*
1324  * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1325  * makes them final by swapping the staging BlockDriverState contents into
1326  * the active BlockDriverState contents.
1327  */
1328 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1329 {
1330     BlockDriver *drv;
1331 
1332     assert(reopen_state != NULL);
1333     drv = reopen_state->bs->drv;
1334     assert(drv != NULL);
1335 
1336     /* If there are any driver level actions to take */
1337     if (drv->bdrv_reopen_commit) {
1338         drv->bdrv_reopen_commit(reopen_state);
1339     }
1340 
1341     /* set BDS specific flags now */
1342     reopen_state->bs->open_flags         = reopen_state->flags;
1343     reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1344                                               BDRV_O_CACHE_WB);
1345     reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1346 }
1347 
1348 /*
1349  * Abort the reopen, and delete and free the staged changes in
1350  * reopen_state
1351  */
1352 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1353 {
1354     BlockDriver *drv;
1355 
1356     assert(reopen_state != NULL);
1357     drv = reopen_state->bs->drv;
1358     assert(drv != NULL);
1359 
1360     if (drv->bdrv_reopen_abort) {
1361         drv->bdrv_reopen_abort(reopen_state);
1362     }
1363 }
1364 
1365 
1366 void bdrv_close(BlockDriverState *bs)
1367 {
1368     if (bs->job) {
1369         block_job_cancel_sync(bs->job);
1370     }
1371     bdrv_drain_all(); /* complete I/O */
1372     bdrv_flush(bs);
1373     bdrv_drain_all(); /* in case flush left pending I/O */
1374     notifier_list_notify(&bs->close_notifiers, bs);
1375 
1376     if (bs->drv) {
1377         if (bs->backing_hd) {
1378             bdrv_delete(bs->backing_hd);
1379             bs->backing_hd = NULL;
1380         }
1381         bs->drv->bdrv_close(bs);
1382         g_free(bs->opaque);
1383 #ifdef _WIN32
1384         if (bs->is_temporary) {
1385             unlink(bs->filename);
1386         }
1387 #endif
1388         bs->opaque = NULL;
1389         bs->drv = NULL;
1390         bs->copy_on_read = 0;
1391         bs->backing_file[0] = '\0';
1392         bs->backing_format[0] = '\0';
1393         bs->total_sectors = 0;
1394         bs->encrypted = 0;
1395         bs->valid_key = 0;
1396         bs->sg = 0;
1397         bs->growable = 0;
1398         QDECREF(bs->options);
1399         bs->options = NULL;
1400 
1401         if (bs->file != NULL) {
1402             bdrv_delete(bs->file);
1403             bs->file = NULL;
1404         }
1405     }
1406 
1407     bdrv_dev_change_media_cb(bs, false);
1408 
1409     /*throttling disk I/O limits*/
1410     if (bs->io_limits_enabled) {
1411         bdrv_io_limits_disable(bs);
1412     }
1413 }
1414 
1415 void bdrv_close_all(void)
1416 {
1417     BlockDriverState *bs;
1418 
1419     QTAILQ_FOREACH(bs, &bdrv_states, list) {
1420         bdrv_close(bs);
1421     }
1422 }
1423 
1424 /*
1425  * Wait for pending requests to complete across all BlockDriverStates
1426  *
1427  * This function does not flush data to disk, use bdrv_flush_all() for that
1428  * after calling this function.
1429  *
1430  * Note that completion of an asynchronous I/O operation can trigger any
1431  * number of other I/O operations on other devices---for example a coroutine
1432  * can be arbitrarily complex and a constant flow of I/O can come until the
1433  * coroutine is complete.  Because of this, it is not possible to have a
1434  * function to drain a single device's I/O queue.
1435  */
1436 void bdrv_drain_all(void)
1437 {
1438     BlockDriverState *bs;
1439     bool busy;
1440 
1441     do {
1442         busy = qemu_aio_wait();
1443 
1444         /* FIXME: We do not have timer support here, so this is effectively
1445          * a busy wait.
1446          */
1447         QTAILQ_FOREACH(bs, &bdrv_states, list) {
1448             if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
1449                 qemu_co_queue_restart_all(&bs->throttled_reqs);
1450                 busy = true;
1451             }
1452         }
1453     } while (busy);
1454 
1455     /* If requests are still pending there is a bug somewhere */
1456     QTAILQ_FOREACH(bs, &bdrv_states, list) {
1457         assert(QLIST_EMPTY(&bs->tracked_requests));
1458         assert(qemu_co_queue_empty(&bs->throttled_reqs));
1459     }
1460 }
1461 
1462 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1463    Also, NULL terminate the device_name to prevent double remove */
1464 void bdrv_make_anon(BlockDriverState *bs)
1465 {
1466     if (bs->device_name[0] != '\0') {
1467         QTAILQ_REMOVE(&bdrv_states, bs, list);
1468     }
1469     bs->device_name[0] = '\0';
1470 }
1471 
1472 static void bdrv_rebind(BlockDriverState *bs)
1473 {
1474     if (bs->drv && bs->drv->bdrv_rebind) {
1475         bs->drv->bdrv_rebind(bs);
1476     }
1477 }
1478 
1479 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1480                                      BlockDriverState *bs_src)
1481 {
1482     /* move some fields that need to stay attached to the device */
1483     bs_dest->open_flags         = bs_src->open_flags;
1484 
1485     /* dev info */
1486     bs_dest->dev_ops            = bs_src->dev_ops;
1487     bs_dest->dev_opaque         = bs_src->dev_opaque;
1488     bs_dest->dev                = bs_src->dev;
1489     bs_dest->buffer_alignment   = bs_src->buffer_alignment;
1490     bs_dest->copy_on_read       = bs_src->copy_on_read;
1491 
1492     bs_dest->enable_write_cache = bs_src->enable_write_cache;
1493 
1494     /* i/o timing parameters */
1495     bs_dest->slice_start        = bs_src->slice_start;
1496     bs_dest->slice_end          = bs_src->slice_end;
1497     bs_dest->slice_submitted    = bs_src->slice_submitted;
1498     bs_dest->io_limits          = bs_src->io_limits;
1499     bs_dest->throttled_reqs     = bs_src->throttled_reqs;
1500     bs_dest->block_timer        = bs_src->block_timer;
1501     bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
1502 
1503     /* r/w error */
1504     bs_dest->on_read_error      = bs_src->on_read_error;
1505     bs_dest->on_write_error     = bs_src->on_write_error;
1506 
1507     /* i/o status */
1508     bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
1509     bs_dest->iostatus           = bs_src->iostatus;
1510 
1511     /* dirty bitmap */
1512     bs_dest->dirty_bitmap       = bs_src->dirty_bitmap;
1513 
1514     /* job */
1515     bs_dest->in_use             = bs_src->in_use;
1516     bs_dest->job                = bs_src->job;
1517 
1518     /* keep the same entry in bdrv_states */
1519     pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1520             bs_src->device_name);
1521     bs_dest->list = bs_src->list;
1522 }
1523 
1524 /*
1525  * Swap bs contents for two image chains while they are live,
1526  * while keeping required fields on the BlockDriverState that is
1527  * actually attached to a device.
1528  *
1529  * This will modify the BlockDriverState fields, and swap contents
1530  * between bs_new and bs_old. Both bs_new and bs_old are modified.
1531  *
1532  * bs_new is required to be anonymous.
1533  *
1534  * This function does not create any image files.
1535  */
1536 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1537 {
1538     BlockDriverState tmp;
1539 
1540     /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1541     assert(bs_new->device_name[0] == '\0');
1542     assert(bs_new->dirty_bitmap == NULL);
1543     assert(bs_new->job == NULL);
1544     assert(bs_new->dev == NULL);
1545     assert(bs_new->in_use == 0);
1546     assert(bs_new->io_limits_enabled == false);
1547     assert(bs_new->block_timer == NULL);
1548 
1549     tmp = *bs_new;
1550     *bs_new = *bs_old;
1551     *bs_old = tmp;
1552 
1553     /* there are some fields that should not be swapped, move them back */
1554     bdrv_move_feature_fields(&tmp, bs_old);
1555     bdrv_move_feature_fields(bs_old, bs_new);
1556     bdrv_move_feature_fields(bs_new, &tmp);
1557 
1558     /* bs_new shouldn't be in bdrv_states even after the swap!  */
1559     assert(bs_new->device_name[0] == '\0');
1560 
1561     /* Check a few fields that should remain attached to the device */
1562     assert(bs_new->dev == NULL);
1563     assert(bs_new->job == NULL);
1564     assert(bs_new->in_use == 0);
1565     assert(bs_new->io_limits_enabled == false);
1566     assert(bs_new->block_timer == NULL);
1567 
1568     bdrv_rebind(bs_new);
1569     bdrv_rebind(bs_old);
1570 }
1571 
1572 /*
1573  * Add new bs contents at the top of an image chain while the chain is
1574  * live, while keeping required fields on the top layer.
1575  *
1576  * This will modify the BlockDriverState fields, and swap contents
1577  * between bs_new and bs_top. Both bs_new and bs_top are modified.
1578  *
1579  * bs_new is required to be anonymous.
1580  *
1581  * This function does not create any image files.
1582  */
1583 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1584 {
1585     bdrv_swap(bs_new, bs_top);
1586 
1587     /* The contents of 'tmp' will become bs_top, as we are
1588      * swapping bs_new and bs_top contents. */
1589     bs_top->backing_hd = bs_new;
1590     bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1591     pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1592             bs_new->filename);
1593     pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1594             bs_new->drv ? bs_new->drv->format_name : "");
1595 }
1596 
1597 void bdrv_delete(BlockDriverState *bs)
1598 {
1599     assert(!bs->dev);
1600     assert(!bs->job);
1601     assert(!bs->in_use);
1602 
1603     /* remove from list, if necessary */
1604     bdrv_make_anon(bs);
1605 
1606     bdrv_close(bs);
1607 
1608     g_free(bs);
1609 }
1610 
1611 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1612 /* TODO change to DeviceState *dev when all users are qdevified */
1613 {
1614     if (bs->dev) {
1615         return -EBUSY;
1616     }
1617     bs->dev = dev;
1618     bdrv_iostatus_reset(bs);
1619     return 0;
1620 }
1621 
1622 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1623 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1624 {
1625     if (bdrv_attach_dev(bs, dev) < 0) {
1626         abort();
1627     }
1628 }
1629 
1630 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1631 /* TODO change to DeviceState *dev when all users are qdevified */
1632 {
1633     assert(bs->dev == dev);
1634     bs->dev = NULL;
1635     bs->dev_ops = NULL;
1636     bs->dev_opaque = NULL;
1637     bs->buffer_alignment = 512;
1638 }
1639 
1640 /* TODO change to return DeviceState * when all users are qdevified */
1641 void *bdrv_get_attached_dev(BlockDriverState *bs)
1642 {
1643     return bs->dev;
1644 }
1645 
1646 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1647                       void *opaque)
1648 {
1649     bs->dev_ops = ops;
1650     bs->dev_opaque = opaque;
1651 }
1652 
1653 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1654                                enum MonitorEvent ev,
1655                                BlockErrorAction action, bool is_read)
1656 {
1657     QObject *data;
1658     const char *action_str;
1659 
1660     switch (action) {
1661     case BDRV_ACTION_REPORT:
1662         action_str = "report";
1663         break;
1664     case BDRV_ACTION_IGNORE:
1665         action_str = "ignore";
1666         break;
1667     case BDRV_ACTION_STOP:
1668         action_str = "stop";
1669         break;
1670     default:
1671         abort();
1672     }
1673 
1674     data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1675                               bdrv->device_name,
1676                               action_str,
1677                               is_read ? "read" : "write");
1678     monitor_protocol_event(ev, data);
1679 
1680     qobject_decref(data);
1681 }
1682 
1683 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1684 {
1685     QObject *data;
1686 
1687     data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1688                               bdrv_get_device_name(bs), ejected);
1689     monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1690 
1691     qobject_decref(data);
1692 }
1693 
1694 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1695 {
1696     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1697         bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1698         bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1699         if (tray_was_closed) {
1700             /* tray open */
1701             bdrv_emit_qmp_eject_event(bs, true);
1702         }
1703         if (load) {
1704             /* tray close */
1705             bdrv_emit_qmp_eject_event(bs, false);
1706         }
1707     }
1708 }
1709 
1710 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1711 {
1712     return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1713 }
1714 
1715 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1716 {
1717     if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1718         bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1719     }
1720 }
1721 
1722 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1723 {
1724     if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1725         return bs->dev_ops->is_tray_open(bs->dev_opaque);
1726     }
1727     return false;
1728 }
1729 
1730 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1731 {
1732     if (bs->dev_ops && bs->dev_ops->resize_cb) {
1733         bs->dev_ops->resize_cb(bs->dev_opaque);
1734     }
1735 }
1736 
1737 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1738 {
1739     if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1740         return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1741     }
1742     return false;
1743 }
1744 
1745 /*
1746  * Run consistency checks on an image
1747  *
1748  * Returns 0 if the check could be completed (it doesn't mean that the image is
1749  * free of errors) or -errno when an internal error occurred. The results of the
1750  * check are stored in res.
1751  */
1752 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1753 {
1754     if (bs->drv->bdrv_check == NULL) {
1755         return -ENOTSUP;
1756     }
1757 
1758     memset(res, 0, sizeof(*res));
1759     return bs->drv->bdrv_check(bs, res, fix);
1760 }
1761 
1762 #define COMMIT_BUF_SECTORS 2048
1763 
1764 /* commit COW file into the raw image */
1765 int bdrv_commit(BlockDriverState *bs)
1766 {
1767     BlockDriver *drv = bs->drv;
1768     int64_t sector, total_sectors;
1769     int n, ro, open_flags;
1770     int ret = 0;
1771     uint8_t *buf;
1772     char filename[PATH_MAX];
1773 
1774     if (!drv)
1775         return -ENOMEDIUM;
1776 
1777     if (!bs->backing_hd) {
1778         return -ENOTSUP;
1779     }
1780 
1781     if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1782         return -EBUSY;
1783     }
1784 
1785     ro = bs->backing_hd->read_only;
1786     /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1787     pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1788     open_flags =  bs->backing_hd->open_flags;
1789 
1790     if (ro) {
1791         if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1792             return -EACCES;
1793         }
1794     }
1795 
1796     total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1797     buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1798 
1799     for (sector = 0; sector < total_sectors; sector += n) {
1800         if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
1801 
1802             if (bdrv_read(bs, sector, buf, n) != 0) {
1803                 ret = -EIO;
1804                 goto ro_cleanup;
1805             }
1806 
1807             if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1808                 ret = -EIO;
1809                 goto ro_cleanup;
1810             }
1811         }
1812     }
1813 
1814     if (drv->bdrv_make_empty) {
1815         ret = drv->bdrv_make_empty(bs);
1816         bdrv_flush(bs);
1817     }
1818 
1819     /*
1820      * Make sure all data we wrote to the backing device is actually
1821      * stable on disk.
1822      */
1823     if (bs->backing_hd)
1824         bdrv_flush(bs->backing_hd);
1825 
1826 ro_cleanup:
1827     g_free(buf);
1828 
1829     if (ro) {
1830         /* ignoring error return here */
1831         bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1832     }
1833 
1834     return ret;
1835 }
1836 
1837 int bdrv_commit_all(void)
1838 {
1839     BlockDriverState *bs;
1840 
1841     QTAILQ_FOREACH(bs, &bdrv_states, list) {
1842         if (bs->drv && bs->backing_hd) {
1843             int ret = bdrv_commit(bs);
1844             if (ret < 0) {
1845                 return ret;
1846             }
1847         }
1848     }
1849     return 0;
1850 }
1851 
1852 /**
1853  * Remove an active request from the tracked requests list
1854  *
1855  * This function should be called when a tracked request is completing.
1856  */
1857 static void tracked_request_end(BdrvTrackedRequest *req)
1858 {
1859     QLIST_REMOVE(req, list);
1860     qemu_co_queue_restart_all(&req->wait_queue);
1861 }
1862 
1863 /**
1864  * Add an active request to the tracked requests list
1865  */
1866 static void tracked_request_begin(BdrvTrackedRequest *req,
1867                                   BlockDriverState *bs,
1868                                   int64_t sector_num,
1869                                   int nb_sectors, bool is_write)
1870 {
1871     *req = (BdrvTrackedRequest){
1872         .bs = bs,
1873         .sector_num = sector_num,
1874         .nb_sectors = nb_sectors,
1875         .is_write = is_write,
1876         .co = qemu_coroutine_self(),
1877     };
1878 
1879     qemu_co_queue_init(&req->wait_queue);
1880 
1881     QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
1882 }
1883 
1884 /**
1885  * Round a region to cluster boundaries
1886  */
1887 void bdrv_round_to_clusters(BlockDriverState *bs,
1888                             int64_t sector_num, int nb_sectors,
1889                             int64_t *cluster_sector_num,
1890                             int *cluster_nb_sectors)
1891 {
1892     BlockDriverInfo bdi;
1893 
1894     if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
1895         *cluster_sector_num = sector_num;
1896         *cluster_nb_sectors = nb_sectors;
1897     } else {
1898         int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
1899         *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
1900         *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
1901                                             nb_sectors, c);
1902     }
1903 }
1904 
1905 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
1906                                      int64_t sector_num, int nb_sectors) {
1907     /*        aaaa   bbbb */
1908     if (sector_num >= req->sector_num + req->nb_sectors) {
1909         return false;
1910     }
1911     /* bbbb   aaaa        */
1912     if (req->sector_num >= sector_num + nb_sectors) {
1913         return false;
1914     }
1915     return true;
1916 }
1917 
1918 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
1919         int64_t sector_num, int nb_sectors)
1920 {
1921     BdrvTrackedRequest *req;
1922     int64_t cluster_sector_num;
1923     int cluster_nb_sectors;
1924     bool retry;
1925 
1926     /* If we touch the same cluster it counts as an overlap.  This guarantees
1927      * that allocating writes will be serialized and not race with each other
1928      * for the same cluster.  For example, in copy-on-read it ensures that the
1929      * CoR read and write operations are atomic and guest writes cannot
1930      * interleave between them.
1931      */
1932     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
1933                            &cluster_sector_num, &cluster_nb_sectors);
1934 
1935     do {
1936         retry = false;
1937         QLIST_FOREACH(req, &bs->tracked_requests, list) {
1938             if (tracked_request_overlaps(req, cluster_sector_num,
1939                                          cluster_nb_sectors)) {
1940                 /* Hitting this means there was a reentrant request, for
1941                  * example, a block driver issuing nested requests.  This must
1942                  * never happen since it means deadlock.
1943                  */
1944                 assert(qemu_coroutine_self() != req->co);
1945 
1946                 qemu_co_queue_wait(&req->wait_queue);
1947                 retry = true;
1948                 break;
1949             }
1950         }
1951     } while (retry);
1952 }
1953 
1954 /*
1955  * Return values:
1956  * 0        - success
1957  * -EINVAL  - backing format specified, but no file
1958  * -ENOSPC  - can't update the backing file because no space is left in the
1959  *            image file header
1960  * -ENOTSUP - format driver doesn't support changing the backing file
1961  */
1962 int bdrv_change_backing_file(BlockDriverState *bs,
1963     const char *backing_file, const char *backing_fmt)
1964 {
1965     BlockDriver *drv = bs->drv;
1966     int ret;
1967 
1968     /* Backing file format doesn't make sense without a backing file */
1969     if (backing_fmt && !backing_file) {
1970         return -EINVAL;
1971     }
1972 
1973     if (drv->bdrv_change_backing_file != NULL) {
1974         ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
1975     } else {
1976         ret = -ENOTSUP;
1977     }
1978 
1979     if (ret == 0) {
1980         pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
1981         pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
1982     }
1983     return ret;
1984 }
1985 
1986 /*
1987  * Finds the image layer in the chain that has 'bs' as its backing file.
1988  *
1989  * active is the current topmost image.
1990  *
1991  * Returns NULL if bs is not found in active's image chain,
1992  * or if active == bs.
1993  */
1994 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
1995                                     BlockDriverState *bs)
1996 {
1997     BlockDriverState *overlay = NULL;
1998     BlockDriverState *intermediate;
1999 
2000     assert(active != NULL);
2001     assert(bs != NULL);
2002 
2003     /* if bs is the same as active, then by definition it has no overlay
2004      */
2005     if (active == bs) {
2006         return NULL;
2007     }
2008 
2009     intermediate = active;
2010     while (intermediate->backing_hd) {
2011         if (intermediate->backing_hd == bs) {
2012             overlay = intermediate;
2013             break;
2014         }
2015         intermediate = intermediate->backing_hd;
2016     }
2017 
2018     return overlay;
2019 }
2020 
2021 typedef struct BlkIntermediateStates {
2022     BlockDriverState *bs;
2023     QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2024 } BlkIntermediateStates;
2025 
2026 
2027 /*
2028  * Drops images above 'base' up to and including 'top', and sets the image
2029  * above 'top' to have base as its backing file.
2030  *
2031  * Requires that the overlay to 'top' is opened r/w, so that the backing file
2032  * information in 'bs' can be properly updated.
2033  *
2034  * E.g., this will convert the following chain:
2035  * bottom <- base <- intermediate <- top <- active
2036  *
2037  * to
2038  *
2039  * bottom <- base <- active
2040  *
2041  * It is allowed for bottom==base, in which case it converts:
2042  *
2043  * base <- intermediate <- top <- active
2044  *
2045  * to
2046  *
2047  * base <- active
2048  *
2049  * Error conditions:
2050  *  if active == top, that is considered an error
2051  *
2052  */
2053 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2054                            BlockDriverState *base)
2055 {
2056     BlockDriverState *intermediate;
2057     BlockDriverState *base_bs = NULL;
2058     BlockDriverState *new_top_bs = NULL;
2059     BlkIntermediateStates *intermediate_state, *next;
2060     int ret = -EIO;
2061 
2062     QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2063     QSIMPLEQ_INIT(&states_to_delete);
2064 
2065     if (!top->drv || !base->drv) {
2066         goto exit;
2067     }
2068 
2069     new_top_bs = bdrv_find_overlay(active, top);
2070 
2071     if (new_top_bs == NULL) {
2072         /* we could not find the image above 'top', this is an error */
2073         goto exit;
2074     }
2075 
2076     /* special case of new_top_bs->backing_hd already pointing to base - nothing
2077      * to do, no intermediate images */
2078     if (new_top_bs->backing_hd == base) {
2079         ret = 0;
2080         goto exit;
2081     }
2082 
2083     intermediate = top;
2084 
2085     /* now we will go down through the list, and add each BDS we find
2086      * into our deletion queue, until we hit the 'base'
2087      */
2088     while (intermediate) {
2089         intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2090         intermediate_state->bs = intermediate;
2091         QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2092 
2093         if (intermediate->backing_hd == base) {
2094             base_bs = intermediate->backing_hd;
2095             break;
2096         }
2097         intermediate = intermediate->backing_hd;
2098     }
2099     if (base_bs == NULL) {
2100         /* something went wrong, we did not end at the base. safely
2101          * unravel everything, and exit with error */
2102         goto exit;
2103     }
2104 
2105     /* success - we can delete the intermediate states, and link top->base */
2106     ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2107                                    base_bs->drv ? base_bs->drv->format_name : "");
2108     if (ret) {
2109         goto exit;
2110     }
2111     new_top_bs->backing_hd = base_bs;
2112 
2113 
2114     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2115         /* so that bdrv_close() does not recursively close the chain */
2116         intermediate_state->bs->backing_hd = NULL;
2117         bdrv_delete(intermediate_state->bs);
2118     }
2119     ret = 0;
2120 
2121 exit:
2122     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2123         g_free(intermediate_state);
2124     }
2125     return ret;
2126 }
2127 
2128 
2129 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2130                                    size_t size)
2131 {
2132     int64_t len;
2133 
2134     if (!bdrv_is_inserted(bs))
2135         return -ENOMEDIUM;
2136 
2137     if (bs->growable)
2138         return 0;
2139 
2140     len = bdrv_getlength(bs);
2141 
2142     if (offset < 0)
2143         return -EIO;
2144 
2145     if ((offset > len) || (len - offset < size))
2146         return -EIO;
2147 
2148     return 0;
2149 }
2150 
2151 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2152                               int nb_sectors)
2153 {
2154     return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2155                                    nb_sectors * BDRV_SECTOR_SIZE);
2156 }
2157 
2158 typedef struct RwCo {
2159     BlockDriverState *bs;
2160     int64_t sector_num;
2161     int nb_sectors;
2162     QEMUIOVector *qiov;
2163     bool is_write;
2164     int ret;
2165     BdrvRequestFlags flags;
2166 } RwCo;
2167 
2168 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2169 {
2170     RwCo *rwco = opaque;
2171 
2172     if (!rwco->is_write) {
2173         rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2174                                      rwco->nb_sectors, rwco->qiov,
2175                                      rwco->flags);
2176     } else {
2177         rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2178                                       rwco->nb_sectors, rwco->qiov,
2179                                       rwco->flags);
2180     }
2181 }
2182 
2183 /*
2184  * Process a vectored synchronous request using coroutines
2185  */
2186 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2187                        QEMUIOVector *qiov, bool is_write,
2188                        BdrvRequestFlags flags)
2189 {
2190     Coroutine *co;
2191     RwCo rwco = {
2192         .bs = bs,
2193         .sector_num = sector_num,
2194         .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2195         .qiov = qiov,
2196         .is_write = is_write,
2197         .ret = NOT_DONE,
2198         .flags = flags,
2199     };
2200     assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2201 
2202     /**
2203      * In sync call context, when the vcpu is blocked, this throttling timer
2204      * will not fire; so the I/O throttling function has to be disabled here
2205      * if it has been enabled.
2206      */
2207     if (bs->io_limits_enabled) {
2208         fprintf(stderr, "Disabling I/O throttling on '%s' due "
2209                         "to synchronous I/O.\n", bdrv_get_device_name(bs));
2210         bdrv_io_limits_disable(bs);
2211     }
2212 
2213     if (qemu_in_coroutine()) {
2214         /* Fast-path if already in coroutine context */
2215         bdrv_rw_co_entry(&rwco);
2216     } else {
2217         co = qemu_coroutine_create(bdrv_rw_co_entry);
2218         qemu_coroutine_enter(co, &rwco);
2219         while (rwco.ret == NOT_DONE) {
2220             qemu_aio_wait();
2221         }
2222     }
2223     return rwco.ret;
2224 }
2225 
2226 /*
2227  * Process a synchronous request using coroutines
2228  */
2229 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2230                       int nb_sectors, bool is_write, BdrvRequestFlags flags)
2231 {
2232     QEMUIOVector qiov;
2233     struct iovec iov = {
2234         .iov_base = (void *)buf,
2235         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2236     };
2237 
2238     qemu_iovec_init_external(&qiov, &iov, 1);
2239     return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
2240 }
2241 
2242 /* return < 0 if error. See bdrv_write() for the return codes */
2243 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2244               uint8_t *buf, int nb_sectors)
2245 {
2246     return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2247 }
2248 
2249 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2250 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2251                           uint8_t *buf, int nb_sectors)
2252 {
2253     bool enabled;
2254     int ret;
2255 
2256     enabled = bs->io_limits_enabled;
2257     bs->io_limits_enabled = false;
2258     ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2259     bs->io_limits_enabled = enabled;
2260     return ret;
2261 }
2262 
2263 /* Return < 0 if error. Important errors are:
2264   -EIO         generic I/O error (may happen for all errors)
2265   -ENOMEDIUM   No media inserted.
2266   -EINVAL      Invalid sector number or nb_sectors
2267   -EACCES      Trying to write a read-only device
2268 */
2269 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2270                const uint8_t *buf, int nb_sectors)
2271 {
2272     return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2273 }
2274 
2275 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2276 {
2277     return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
2278 }
2279 
2280 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
2281 {
2282     return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2283                       BDRV_REQ_ZERO_WRITE);
2284 }
2285 
2286 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2287                void *buf, int count1)
2288 {
2289     uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2290     int len, nb_sectors, count;
2291     int64_t sector_num;
2292     int ret;
2293 
2294     count = count1;
2295     /* first read to align to sector start */
2296     len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2297     if (len > count)
2298         len = count;
2299     sector_num = offset >> BDRV_SECTOR_BITS;
2300     if (len > 0) {
2301         if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2302             return ret;
2303         memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2304         count -= len;
2305         if (count == 0)
2306             return count1;
2307         sector_num++;
2308         buf += len;
2309     }
2310 
2311     /* read the sectors "in place" */
2312     nb_sectors = count >> BDRV_SECTOR_BITS;
2313     if (nb_sectors > 0) {
2314         if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2315             return ret;
2316         sector_num += nb_sectors;
2317         len = nb_sectors << BDRV_SECTOR_BITS;
2318         buf += len;
2319         count -= len;
2320     }
2321 
2322     /* add data from the last sector */
2323     if (count > 0) {
2324         if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2325             return ret;
2326         memcpy(buf, tmp_buf, count);
2327     }
2328     return count1;
2329 }
2330 
2331 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2332 {
2333     uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2334     int len, nb_sectors, count;
2335     int64_t sector_num;
2336     int ret;
2337 
2338     count = qiov->size;
2339 
2340     /* first write to align to sector start */
2341     len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2342     if (len > count)
2343         len = count;
2344     sector_num = offset >> BDRV_SECTOR_BITS;
2345     if (len > 0) {
2346         if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2347             return ret;
2348         qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2349                           len);
2350         if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2351             return ret;
2352         count -= len;
2353         if (count == 0)
2354             return qiov->size;
2355         sector_num++;
2356     }
2357 
2358     /* write the sectors "in place" */
2359     nb_sectors = count >> BDRV_SECTOR_BITS;
2360     if (nb_sectors > 0) {
2361         QEMUIOVector qiov_inplace;
2362 
2363         qemu_iovec_init(&qiov_inplace, qiov->niov);
2364         qemu_iovec_concat(&qiov_inplace, qiov, len,
2365                           nb_sectors << BDRV_SECTOR_BITS);
2366         ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2367         qemu_iovec_destroy(&qiov_inplace);
2368         if (ret < 0) {
2369             return ret;
2370         }
2371 
2372         sector_num += nb_sectors;
2373         len = nb_sectors << BDRV_SECTOR_BITS;
2374         count -= len;
2375     }
2376 
2377     /* add data from the last sector */
2378     if (count > 0) {
2379         if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2380             return ret;
2381         qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2382         if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2383             return ret;
2384     }
2385     return qiov->size;
2386 }
2387 
2388 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2389                 const void *buf, int count1)
2390 {
2391     QEMUIOVector qiov;
2392     struct iovec iov = {
2393         .iov_base   = (void *) buf,
2394         .iov_len    = count1,
2395     };
2396 
2397     qemu_iovec_init_external(&qiov, &iov, 1);
2398     return bdrv_pwritev(bs, offset, &qiov);
2399 }
2400 
2401 /*
2402  * Writes to the file and ensures that no writes are reordered across this
2403  * request (acts as a barrier)
2404  *
2405  * Returns 0 on success, -errno in error cases.
2406  */
2407 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2408     const void *buf, int count)
2409 {
2410     int ret;
2411 
2412     ret = bdrv_pwrite(bs, offset, buf, count);
2413     if (ret < 0) {
2414         return ret;
2415     }
2416 
2417     /* No flush needed for cache modes that already do it */
2418     if (bs->enable_write_cache) {
2419         bdrv_flush(bs);
2420     }
2421 
2422     return 0;
2423 }
2424 
2425 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2426         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2427 {
2428     /* Perform I/O through a temporary buffer so that users who scribble over
2429      * their read buffer while the operation is in progress do not end up
2430      * modifying the image file.  This is critical for zero-copy guest I/O
2431      * where anything might happen inside guest memory.
2432      */
2433     void *bounce_buffer;
2434 
2435     BlockDriver *drv = bs->drv;
2436     struct iovec iov;
2437     QEMUIOVector bounce_qiov;
2438     int64_t cluster_sector_num;
2439     int cluster_nb_sectors;
2440     size_t skip_bytes;
2441     int ret;
2442 
2443     /* Cover entire cluster so no additional backing file I/O is required when
2444      * allocating cluster in the image file.
2445      */
2446     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2447                            &cluster_sector_num, &cluster_nb_sectors);
2448 
2449     trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2450                                    cluster_sector_num, cluster_nb_sectors);
2451 
2452     iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2453     iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2454     qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2455 
2456     ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2457                              &bounce_qiov);
2458     if (ret < 0) {
2459         goto err;
2460     }
2461 
2462     if (drv->bdrv_co_write_zeroes &&
2463         buffer_is_zero(bounce_buffer, iov.iov_len)) {
2464         ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2465                                       cluster_nb_sectors);
2466     } else {
2467         /* This does not change the data on the disk, it is not necessary
2468          * to flush even in cache=writethrough mode.
2469          */
2470         ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2471                                   &bounce_qiov);
2472     }
2473 
2474     if (ret < 0) {
2475         /* It might be okay to ignore write errors for guest requests.  If this
2476          * is a deliberate copy-on-read then we don't want to ignore the error.
2477          * Simply report it in all cases.
2478          */
2479         goto err;
2480     }
2481 
2482     skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2483     qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2484                         nb_sectors * BDRV_SECTOR_SIZE);
2485 
2486 err:
2487     qemu_vfree(bounce_buffer);
2488     return ret;
2489 }
2490 
2491 /*
2492  * Handle a read request in coroutine context
2493  */
2494 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2495     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2496     BdrvRequestFlags flags)
2497 {
2498     BlockDriver *drv = bs->drv;
2499     BdrvTrackedRequest req;
2500     int ret;
2501 
2502     if (!drv) {
2503         return -ENOMEDIUM;
2504     }
2505     if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2506         return -EIO;
2507     }
2508 
2509     /* throttling disk read I/O */
2510     if (bs->io_limits_enabled) {
2511         bdrv_io_limits_intercept(bs, false, nb_sectors);
2512     }
2513 
2514     if (bs->copy_on_read) {
2515         flags |= BDRV_REQ_COPY_ON_READ;
2516     }
2517     if (flags & BDRV_REQ_COPY_ON_READ) {
2518         bs->copy_on_read_in_flight++;
2519     }
2520 
2521     if (bs->copy_on_read_in_flight) {
2522         wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2523     }
2524 
2525     tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2526 
2527     if (flags & BDRV_REQ_COPY_ON_READ) {
2528         int pnum;
2529 
2530         ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
2531         if (ret < 0) {
2532             goto out;
2533         }
2534 
2535         if (!ret || pnum != nb_sectors) {
2536             ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2537             goto out;
2538         }
2539     }
2540 
2541     ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2542 
2543 out:
2544     tracked_request_end(&req);
2545 
2546     if (flags & BDRV_REQ_COPY_ON_READ) {
2547         bs->copy_on_read_in_flight--;
2548     }
2549 
2550     return ret;
2551 }
2552 
2553 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2554     int nb_sectors, QEMUIOVector *qiov)
2555 {
2556     trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2557 
2558     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2559 }
2560 
2561 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2562     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2563 {
2564     trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2565 
2566     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2567                             BDRV_REQ_COPY_ON_READ);
2568 }
2569 
2570 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2571     int64_t sector_num, int nb_sectors)
2572 {
2573     BlockDriver *drv = bs->drv;
2574     QEMUIOVector qiov;
2575     struct iovec iov;
2576     int ret;
2577 
2578     /* TODO Emulate only part of misaligned requests instead of letting block
2579      * drivers return -ENOTSUP and emulate everything */
2580 
2581     /* First try the efficient write zeroes operation */
2582     if (drv->bdrv_co_write_zeroes) {
2583         ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2584         if (ret != -ENOTSUP) {
2585             return ret;
2586         }
2587     }
2588 
2589     /* Fall back to bounce buffer if write zeroes is unsupported */
2590     iov.iov_len  = nb_sectors * BDRV_SECTOR_SIZE;
2591     iov.iov_base = qemu_blockalign(bs, iov.iov_len);
2592     memset(iov.iov_base, 0, iov.iov_len);
2593     qemu_iovec_init_external(&qiov, &iov, 1);
2594 
2595     ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);
2596 
2597     qemu_vfree(iov.iov_base);
2598     return ret;
2599 }
2600 
2601 /*
2602  * Handle a write request in coroutine context
2603  */
2604 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2605     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2606     BdrvRequestFlags flags)
2607 {
2608     BlockDriver *drv = bs->drv;
2609     BdrvTrackedRequest req;
2610     int ret;
2611 
2612     if (!bs->drv) {
2613         return -ENOMEDIUM;
2614     }
2615     if (bs->read_only) {
2616         return -EACCES;
2617     }
2618     if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2619         return -EIO;
2620     }
2621 
2622     /* throttling disk write I/O */
2623     if (bs->io_limits_enabled) {
2624         bdrv_io_limits_intercept(bs, true, nb_sectors);
2625     }
2626 
2627     if (bs->copy_on_read_in_flight) {
2628         wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2629     }
2630 
2631     tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2632 
2633     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
2634 
2635     if (ret < 0) {
2636         /* Do nothing, write notifier decided to fail this request */
2637     } else if (flags & BDRV_REQ_ZERO_WRITE) {
2638         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
2639     } else {
2640         ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2641     }
2642 
2643     if (ret == 0 && !bs->enable_write_cache) {
2644         ret = bdrv_co_flush(bs);
2645     }
2646 
2647     if (bs->dirty_bitmap) {
2648         bdrv_set_dirty(bs, sector_num, nb_sectors);
2649     }
2650 
2651     if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2652         bs->wr_highest_sector = sector_num + nb_sectors - 1;
2653     }
2654 
2655     tracked_request_end(&req);
2656 
2657     return ret;
2658 }
2659 
2660 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2661     int nb_sectors, QEMUIOVector *qiov)
2662 {
2663     trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2664 
2665     return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2666 }
2667 
2668 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2669                                       int64_t sector_num, int nb_sectors)
2670 {
2671     trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2672 
2673     return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2674                              BDRV_REQ_ZERO_WRITE);
2675 }
2676 
2677 /**
2678  * Truncate file to 'offset' bytes (needed only for file protocols)
2679  */
2680 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2681 {
2682     BlockDriver *drv = bs->drv;
2683     int ret;
2684     if (!drv)
2685         return -ENOMEDIUM;
2686     if (!drv->bdrv_truncate)
2687         return -ENOTSUP;
2688     if (bs->read_only)
2689         return -EACCES;
2690     if (bdrv_in_use(bs))
2691         return -EBUSY;
2692     ret = drv->bdrv_truncate(bs, offset);
2693     if (ret == 0) {
2694         ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2695         bdrv_dev_resize_cb(bs);
2696     }
2697     return ret;
2698 }
2699 
2700 /**
2701  * Length of a allocated file in bytes. Sparse files are counted by actual
2702  * allocated space. Return < 0 if error or unknown.
2703  */
2704 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2705 {
2706     BlockDriver *drv = bs->drv;
2707     if (!drv) {
2708         return -ENOMEDIUM;
2709     }
2710     if (drv->bdrv_get_allocated_file_size) {
2711         return drv->bdrv_get_allocated_file_size(bs);
2712     }
2713     if (bs->file) {
2714         return bdrv_get_allocated_file_size(bs->file);
2715     }
2716     return -ENOTSUP;
2717 }
2718 
2719 /**
2720  * Length of a file in bytes. Return < 0 if error or unknown.
2721  */
2722 int64_t bdrv_getlength(BlockDriverState *bs)
2723 {
2724     BlockDriver *drv = bs->drv;
2725     if (!drv)
2726         return -ENOMEDIUM;
2727 
2728     if (bs->growable || bdrv_dev_has_removable_media(bs)) {
2729         if (drv->bdrv_getlength) {
2730             return drv->bdrv_getlength(bs);
2731         }
2732     }
2733     return bs->total_sectors * BDRV_SECTOR_SIZE;
2734 }
2735 
2736 /* return 0 as number of sectors if no device present or error */
2737 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2738 {
2739     int64_t length;
2740     length = bdrv_getlength(bs);
2741     if (length < 0)
2742         length = 0;
2743     else
2744         length = length >> BDRV_SECTOR_BITS;
2745     *nb_sectors_ptr = length;
2746 }
2747 
2748 /* throttling disk io limits */
2749 void bdrv_set_io_limits(BlockDriverState *bs,
2750                         BlockIOLimit *io_limits)
2751 {
2752     bs->io_limits = *io_limits;
2753     bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
2754 }
2755 
2756 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2757                        BlockdevOnError on_write_error)
2758 {
2759     bs->on_read_error = on_read_error;
2760     bs->on_write_error = on_write_error;
2761 }
2762 
2763 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2764 {
2765     return is_read ? bs->on_read_error : bs->on_write_error;
2766 }
2767 
2768 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2769 {
2770     BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2771 
2772     switch (on_err) {
2773     case BLOCKDEV_ON_ERROR_ENOSPC:
2774         return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2775     case BLOCKDEV_ON_ERROR_STOP:
2776         return BDRV_ACTION_STOP;
2777     case BLOCKDEV_ON_ERROR_REPORT:
2778         return BDRV_ACTION_REPORT;
2779     case BLOCKDEV_ON_ERROR_IGNORE:
2780         return BDRV_ACTION_IGNORE;
2781     default:
2782         abort();
2783     }
2784 }
2785 
2786 /* This is done by device models because, while the block layer knows
2787  * about the error, it does not know whether an operation comes from
2788  * the device or the block layer (from a job, for example).
2789  */
2790 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
2791                        bool is_read, int error)
2792 {
2793     assert(error >= 0);
2794     bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
2795     if (action == BDRV_ACTION_STOP) {
2796         vm_stop(RUN_STATE_IO_ERROR);
2797         bdrv_iostatus_set_err(bs, error);
2798     }
2799 }
2800 
2801 int bdrv_is_read_only(BlockDriverState *bs)
2802 {
2803     return bs->read_only;
2804 }
2805 
2806 int bdrv_is_sg(BlockDriverState *bs)
2807 {
2808     return bs->sg;
2809 }
2810 
2811 int bdrv_enable_write_cache(BlockDriverState *bs)
2812 {
2813     return bs->enable_write_cache;
2814 }
2815 
2816 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
2817 {
2818     bs->enable_write_cache = wce;
2819 
2820     /* so a reopen() will preserve wce */
2821     if (wce) {
2822         bs->open_flags |= BDRV_O_CACHE_WB;
2823     } else {
2824         bs->open_flags &= ~BDRV_O_CACHE_WB;
2825     }
2826 }
2827 
2828 int bdrv_is_encrypted(BlockDriverState *bs)
2829 {
2830     if (bs->backing_hd && bs->backing_hd->encrypted)
2831         return 1;
2832     return bs->encrypted;
2833 }
2834 
2835 int bdrv_key_required(BlockDriverState *bs)
2836 {
2837     BlockDriverState *backing_hd = bs->backing_hd;
2838 
2839     if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
2840         return 1;
2841     return (bs->encrypted && !bs->valid_key);
2842 }
2843 
2844 int bdrv_set_key(BlockDriverState *bs, const char *key)
2845 {
2846     int ret;
2847     if (bs->backing_hd && bs->backing_hd->encrypted) {
2848         ret = bdrv_set_key(bs->backing_hd, key);
2849         if (ret < 0)
2850             return ret;
2851         if (!bs->encrypted)
2852             return 0;
2853     }
2854     if (!bs->encrypted) {
2855         return -EINVAL;
2856     } else if (!bs->drv || !bs->drv->bdrv_set_key) {
2857         return -ENOMEDIUM;
2858     }
2859     ret = bs->drv->bdrv_set_key(bs, key);
2860     if (ret < 0) {
2861         bs->valid_key = 0;
2862     } else if (!bs->valid_key) {
2863         bs->valid_key = 1;
2864         /* call the change callback now, we skipped it on open */
2865         bdrv_dev_change_media_cb(bs, true);
2866     }
2867     return ret;
2868 }
2869 
2870 const char *bdrv_get_format_name(BlockDriverState *bs)
2871 {
2872     return bs->drv ? bs->drv->format_name : NULL;
2873 }
2874 
2875 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
2876                          void *opaque)
2877 {
2878     BlockDriver *drv;
2879 
2880     QLIST_FOREACH(drv, &bdrv_drivers, list) {
2881         it(opaque, drv->format_name);
2882     }
2883 }
2884 
2885 BlockDriverState *bdrv_find(const char *name)
2886 {
2887     BlockDriverState *bs;
2888 
2889     QTAILQ_FOREACH(bs, &bdrv_states, list) {
2890         if (!strcmp(name, bs->device_name)) {
2891             return bs;
2892         }
2893     }
2894     return NULL;
2895 }
2896 
2897 BlockDriverState *bdrv_next(BlockDriverState *bs)
2898 {
2899     if (!bs) {
2900         return QTAILQ_FIRST(&bdrv_states);
2901     }
2902     return QTAILQ_NEXT(bs, list);
2903 }
2904 
2905 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
2906 {
2907     BlockDriverState *bs;
2908 
2909     QTAILQ_FOREACH(bs, &bdrv_states, list) {
2910         it(opaque, bs);
2911     }
2912 }
2913 
2914 const char *bdrv_get_device_name(BlockDriverState *bs)
2915 {
2916     return bs->device_name;
2917 }
2918 
2919 int bdrv_get_flags(BlockDriverState *bs)
2920 {
2921     return bs->open_flags;
2922 }
2923 
2924 int bdrv_flush_all(void)
2925 {
2926     BlockDriverState *bs;
2927     int result = 0;
2928 
2929     QTAILQ_FOREACH(bs, &bdrv_states, list) {
2930         int ret = bdrv_flush(bs);
2931         if (ret < 0 && !result) {
2932             result = ret;
2933         }
2934     }
2935 
2936     return result;
2937 }
2938 
2939 int bdrv_has_zero_init_1(BlockDriverState *bs)
2940 {
2941     return 1;
2942 }
2943 
2944 int bdrv_has_zero_init(BlockDriverState *bs)
2945 {
2946     assert(bs->drv);
2947 
2948     if (bs->drv->bdrv_has_zero_init) {
2949         return bs->drv->bdrv_has_zero_init(bs);
2950     }
2951 
2952     /* safe default */
2953     return 0;
2954 }
2955 
2956 typedef struct BdrvCoIsAllocatedData {
2957     BlockDriverState *bs;
2958     BlockDriverState *base;
2959     int64_t sector_num;
2960     int nb_sectors;
2961     int *pnum;
2962     int ret;
2963     bool done;
2964 } BdrvCoIsAllocatedData;
2965 
2966 /*
2967  * Returns true iff the specified sector is present in the disk image. Drivers
2968  * not implementing the functionality are assumed to not support backing files,
2969  * hence all their sectors are reported as allocated.
2970  *
2971  * If 'sector_num' is beyond the end of the disk image the return value is 0
2972  * and 'pnum' is set to 0.
2973  *
2974  * 'pnum' is set to the number of sectors (including and immediately following
2975  * the specified sector) that are known to be in the same
2976  * allocated/unallocated state.
2977  *
2978  * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
2979  * beyond the end of the disk image it will be clamped.
2980  */
2981 int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
2982                                       int nb_sectors, int *pnum)
2983 {
2984     int64_t n;
2985 
2986     if (sector_num >= bs->total_sectors) {
2987         *pnum = 0;
2988         return 0;
2989     }
2990 
2991     n = bs->total_sectors - sector_num;
2992     if (n < nb_sectors) {
2993         nb_sectors = n;
2994     }
2995 
2996     if (!bs->drv->bdrv_co_is_allocated) {
2997         *pnum = nb_sectors;
2998         return 1;
2999     }
3000 
3001     return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
3002 }
3003 
3004 /* Coroutine wrapper for bdrv_is_allocated() */
3005 static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
3006 {
3007     BdrvCoIsAllocatedData *data = opaque;
3008     BlockDriverState *bs = data->bs;
3009 
3010     data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
3011                                      data->pnum);
3012     data->done = true;
3013 }
3014 
3015 /*
3016  * Synchronous wrapper around bdrv_co_is_allocated().
3017  *
3018  * See bdrv_co_is_allocated() for details.
3019  */
3020 int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
3021                       int *pnum)
3022 {
3023     Coroutine *co;
3024     BdrvCoIsAllocatedData data = {
3025         .bs = bs,
3026         .sector_num = sector_num,
3027         .nb_sectors = nb_sectors,
3028         .pnum = pnum,
3029         .done = false,
3030     };
3031 
3032     co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
3033     qemu_coroutine_enter(co, &data);
3034     while (!data.done) {
3035         qemu_aio_wait();
3036     }
3037     return data.ret;
3038 }
3039 
3040 /*
3041  * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3042  *
3043  * Return true if the given sector is allocated in any image between
3044  * BASE and TOP (inclusive).  BASE can be NULL to check if the given
3045  * sector is allocated in any image of the chain.  Return false otherwise.
3046  *
3047  * 'pnum' is set to the number of sectors (including and immediately following
3048  *  the specified sector) that are known to be in the same
3049  *  allocated/unallocated state.
3050  *
3051  */
3052 int coroutine_fn bdrv_co_is_allocated_above(BlockDriverState *top,
3053                                             BlockDriverState *base,
3054                                             int64_t sector_num,
3055                                             int nb_sectors, int *pnum)
3056 {
3057     BlockDriverState *intermediate;
3058     int ret, n = nb_sectors;
3059 
3060     intermediate = top;
3061     while (intermediate && intermediate != base) {
3062         int pnum_inter;
3063         ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
3064                                    &pnum_inter);
3065         if (ret < 0) {
3066             return ret;
3067         } else if (ret) {
3068             *pnum = pnum_inter;
3069             return 1;
3070         }
3071 
3072         /*
3073          * [sector_num, nb_sectors] is unallocated on top but intermediate
3074          * might have
3075          *
3076          * [sector_num+x, nr_sectors] allocated.
3077          */
3078         if (n > pnum_inter &&
3079             (intermediate == top ||
3080              sector_num + pnum_inter < intermediate->total_sectors)) {
3081             n = pnum_inter;
3082         }
3083 
3084         intermediate = intermediate->backing_hd;
3085     }
3086 
3087     *pnum = n;
3088     return 0;
3089 }
3090 
3091 /* Coroutine wrapper for bdrv_is_allocated_above() */
3092 static void coroutine_fn bdrv_is_allocated_above_co_entry(void *opaque)
3093 {
3094     BdrvCoIsAllocatedData *data = opaque;
3095     BlockDriverState *top = data->bs;
3096     BlockDriverState *base = data->base;
3097 
3098     data->ret = bdrv_co_is_allocated_above(top, base, data->sector_num,
3099                                            data->nb_sectors, data->pnum);
3100     data->done = true;
3101 }
3102 
3103 /*
3104  * Synchronous wrapper around bdrv_co_is_allocated_above().
3105  *
3106  * See bdrv_co_is_allocated_above() for details.
3107  */
3108 int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
3109                             int64_t sector_num, int nb_sectors, int *pnum)
3110 {
3111     Coroutine *co;
3112     BdrvCoIsAllocatedData data = {
3113         .bs = top,
3114         .base = base,
3115         .sector_num = sector_num,
3116         .nb_sectors = nb_sectors,
3117         .pnum = pnum,
3118         .done = false,
3119     };
3120 
3121     co = qemu_coroutine_create(bdrv_is_allocated_above_co_entry);
3122     qemu_coroutine_enter(co, &data);
3123     while (!data.done) {
3124         qemu_aio_wait();
3125     }
3126     return data.ret;
3127 }
3128 
3129 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3130 {
3131     if (bs->backing_hd && bs->backing_hd->encrypted)
3132         return bs->backing_file;
3133     else if (bs->encrypted)
3134         return bs->filename;
3135     else
3136         return NULL;
3137 }
3138 
3139 void bdrv_get_backing_filename(BlockDriverState *bs,
3140                                char *filename, int filename_size)
3141 {
3142     pstrcpy(filename, filename_size, bs->backing_file);
3143 }
3144 
3145 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3146                           const uint8_t *buf, int nb_sectors)
3147 {
3148     BlockDriver *drv = bs->drv;
3149     if (!drv)
3150         return -ENOMEDIUM;
3151     if (!drv->bdrv_write_compressed)
3152         return -ENOTSUP;
3153     if (bdrv_check_request(bs, sector_num, nb_sectors))
3154         return -EIO;
3155 
3156     assert(!bs->dirty_bitmap);
3157 
3158     return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3159 }
3160 
3161 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3162 {
3163     BlockDriver *drv = bs->drv;
3164     if (!drv)
3165         return -ENOMEDIUM;
3166     if (!drv->bdrv_get_info)
3167         return -ENOTSUP;
3168     memset(bdi, 0, sizeof(*bdi));
3169     return drv->bdrv_get_info(bs, bdi);
3170 }
3171 
3172 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3173                       int64_t pos, int size)
3174 {
3175     QEMUIOVector qiov;
3176     struct iovec iov = {
3177         .iov_base   = (void *) buf,
3178         .iov_len    = size,
3179     };
3180 
3181     qemu_iovec_init_external(&qiov, &iov, 1);
3182     return bdrv_writev_vmstate(bs, &qiov, pos);
3183 }
3184 
3185 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3186 {
3187     BlockDriver *drv = bs->drv;
3188 
3189     if (!drv) {
3190         return -ENOMEDIUM;
3191     } else if (drv->bdrv_save_vmstate) {
3192         return drv->bdrv_save_vmstate(bs, qiov, pos);
3193     } else if (bs->file) {
3194         return bdrv_writev_vmstate(bs->file, qiov, pos);
3195     }
3196 
3197     return -ENOTSUP;
3198 }
3199 
3200 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3201                       int64_t pos, int size)
3202 {
3203     BlockDriver *drv = bs->drv;
3204     if (!drv)
3205         return -ENOMEDIUM;
3206     if (drv->bdrv_load_vmstate)
3207         return drv->bdrv_load_vmstate(bs, buf, pos, size);
3208     if (bs->file)
3209         return bdrv_load_vmstate(bs->file, buf, pos, size);
3210     return -ENOTSUP;
3211 }
3212 
3213 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3214 {
3215     if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3216         return;
3217     }
3218 
3219     bs->drv->bdrv_debug_event(bs, event);
3220 }
3221 
3222 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3223                           const char *tag)
3224 {
3225     while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3226         bs = bs->file;
3227     }
3228 
3229     if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3230         return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3231     }
3232 
3233     return -ENOTSUP;
3234 }
3235 
3236 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3237 {
3238     while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3239         bs = bs->file;
3240     }
3241 
3242     if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3243         return bs->drv->bdrv_debug_resume(bs, tag);
3244     }
3245 
3246     return -ENOTSUP;
3247 }
3248 
3249 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3250 {
3251     while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3252         bs = bs->file;
3253     }
3254 
3255     if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3256         return bs->drv->bdrv_debug_is_suspended(bs, tag);
3257     }
3258 
3259     return false;
3260 }
3261 
3262 int bdrv_is_snapshot(BlockDriverState *bs)
3263 {
3264     return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3265 }
3266 
3267 /* backing_file can either be relative, or absolute, or a protocol.  If it is
3268  * relative, it must be relative to the chain.  So, passing in bs->filename
3269  * from a BDS as backing_file should not be done, as that may be relative to
3270  * the CWD rather than the chain. */
3271 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3272         const char *backing_file)
3273 {
3274     char *filename_full = NULL;
3275     char *backing_file_full = NULL;
3276     char *filename_tmp = NULL;
3277     int is_protocol = 0;
3278     BlockDriverState *curr_bs = NULL;
3279     BlockDriverState *retval = NULL;
3280 
3281     if (!bs || !bs->drv || !backing_file) {
3282         return NULL;
3283     }
3284 
3285     filename_full     = g_malloc(PATH_MAX);
3286     backing_file_full = g_malloc(PATH_MAX);
3287     filename_tmp      = g_malloc(PATH_MAX);
3288 
3289     is_protocol = path_has_protocol(backing_file);
3290 
3291     for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3292 
3293         /* If either of the filename paths is actually a protocol, then
3294          * compare unmodified paths; otherwise make paths relative */
3295         if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3296             if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3297                 retval = curr_bs->backing_hd;
3298                 break;
3299             }
3300         } else {
3301             /* If not an absolute filename path, make it relative to the current
3302              * image's filename path */
3303             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3304                          backing_file);
3305 
3306             /* We are going to compare absolute pathnames */
3307             if (!realpath(filename_tmp, filename_full)) {
3308                 continue;
3309             }
3310 
3311             /* We need to make sure the backing filename we are comparing against
3312              * is relative to the current image filename (or absolute) */
3313             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3314                          curr_bs->backing_file);
3315 
3316             if (!realpath(filename_tmp, backing_file_full)) {
3317                 continue;
3318             }
3319 
3320             if (strcmp(backing_file_full, filename_full) == 0) {
3321                 retval = curr_bs->backing_hd;
3322                 break;
3323             }
3324         }
3325     }
3326 
3327     g_free(filename_full);
3328     g_free(backing_file_full);
3329     g_free(filename_tmp);
3330     return retval;
3331 }
3332 
3333 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3334 {
3335     if (!bs->drv) {
3336         return 0;
3337     }
3338 
3339     if (!bs->backing_hd) {
3340         return 0;
3341     }
3342 
3343     return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3344 }
3345 
3346 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3347 {
3348     BlockDriverState *curr_bs = NULL;
3349 
3350     if (!bs) {
3351         return NULL;
3352     }
3353 
3354     curr_bs = bs;
3355 
3356     while (curr_bs->backing_hd) {
3357         curr_bs = curr_bs->backing_hd;
3358     }
3359     return curr_bs;
3360 }
3361 
3362 /**************************************************************/
3363 /* async I/Os */
3364 
3365 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3366                                  QEMUIOVector *qiov, int nb_sectors,
3367                                  BlockDriverCompletionFunc *cb, void *opaque)
3368 {
3369     trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3370 
3371     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3372                                  cb, opaque, false);
3373 }
3374 
3375 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3376                                   QEMUIOVector *qiov, int nb_sectors,
3377                                   BlockDriverCompletionFunc *cb, void *opaque)
3378 {
3379     trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3380 
3381     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3382                                  cb, opaque, true);
3383 }
3384 
3385 
3386 typedef struct MultiwriteCB {
3387     int error;
3388     int num_requests;
3389     int num_callbacks;
3390     struct {
3391         BlockDriverCompletionFunc *cb;
3392         void *opaque;
3393         QEMUIOVector *free_qiov;
3394     } callbacks[];
3395 } MultiwriteCB;
3396 
3397 static void multiwrite_user_cb(MultiwriteCB *mcb)
3398 {
3399     int i;
3400 
3401     for (i = 0; i < mcb->num_callbacks; i++) {
3402         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3403         if (mcb->callbacks[i].free_qiov) {
3404             qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3405         }
3406         g_free(mcb->callbacks[i].free_qiov);
3407     }
3408 }
3409 
3410 static void multiwrite_cb(void *opaque, int ret)
3411 {
3412     MultiwriteCB *mcb = opaque;
3413 
3414     trace_multiwrite_cb(mcb, ret);
3415 
3416     if (ret < 0 && !mcb->error) {
3417         mcb->error = ret;
3418     }
3419 
3420     mcb->num_requests--;
3421     if (mcb->num_requests == 0) {
3422         multiwrite_user_cb(mcb);
3423         g_free(mcb);
3424     }
3425 }
3426 
3427 static int multiwrite_req_compare(const void *a, const void *b)
3428 {
3429     const BlockRequest *req1 = a, *req2 = b;
3430 
3431     /*
3432      * Note that we can't simply subtract req2->sector from req1->sector
3433      * here as that could overflow the return value.
3434      */
3435     if (req1->sector > req2->sector) {
3436         return 1;
3437     } else if (req1->sector < req2->sector) {
3438         return -1;
3439     } else {
3440         return 0;
3441     }
3442 }
3443 
3444 /*
3445  * Takes a bunch of requests and tries to merge them. Returns the number of
3446  * requests that remain after merging.
3447  */
3448 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3449     int num_reqs, MultiwriteCB *mcb)
3450 {
3451     int i, outidx;
3452 
3453     // Sort requests by start sector
3454     qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3455 
3456     // Check if adjacent requests touch the same clusters. If so, combine them,
3457     // filling up gaps with zero sectors.
3458     outidx = 0;
3459     for (i = 1; i < num_reqs; i++) {
3460         int merge = 0;
3461         int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3462 
3463         // Handle exactly sequential writes and overlapping writes.
3464         if (reqs[i].sector <= oldreq_last) {
3465             merge = 1;
3466         }
3467 
3468         if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3469             merge = 0;
3470         }
3471 
3472         if (merge) {
3473             size_t size;
3474             QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3475             qemu_iovec_init(qiov,
3476                 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3477 
3478             // Add the first request to the merged one. If the requests are
3479             // overlapping, drop the last sectors of the first request.
3480             size = (reqs[i].sector - reqs[outidx].sector) << 9;
3481             qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3482 
3483             // We should need to add any zeros between the two requests
3484             assert (reqs[i].sector <= oldreq_last);
3485 
3486             // Add the second request
3487             qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3488 
3489             reqs[outidx].nb_sectors = qiov->size >> 9;
3490             reqs[outidx].qiov = qiov;
3491 
3492             mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3493         } else {
3494             outidx++;
3495             reqs[outidx].sector     = reqs[i].sector;
3496             reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3497             reqs[outidx].qiov       = reqs[i].qiov;
3498         }
3499     }
3500 
3501     return outidx + 1;
3502 }
3503 
3504 /*
3505  * Submit multiple AIO write requests at once.
3506  *
3507  * On success, the function returns 0 and all requests in the reqs array have
3508  * been submitted. In error case this function returns -1, and any of the
3509  * requests may or may not be submitted yet. In particular, this means that the
3510  * callback will be called for some of the requests, for others it won't. The
3511  * caller must check the error field of the BlockRequest to wait for the right
3512  * callbacks (if error != 0, no callback will be called).
3513  *
3514  * The implementation may modify the contents of the reqs array, e.g. to merge
3515  * requests. However, the fields opaque and error are left unmodified as they
3516  * are used to signal failure for a single request to the caller.
3517  */
3518 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3519 {
3520     MultiwriteCB *mcb;
3521     int i;
3522 
3523     /* don't submit writes if we don't have a medium */
3524     if (bs->drv == NULL) {
3525         for (i = 0; i < num_reqs; i++) {
3526             reqs[i].error = -ENOMEDIUM;
3527         }
3528         return -1;
3529     }
3530 
3531     if (num_reqs == 0) {
3532         return 0;
3533     }
3534 
3535     // Create MultiwriteCB structure
3536     mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3537     mcb->num_requests = 0;
3538     mcb->num_callbacks = num_reqs;
3539 
3540     for (i = 0; i < num_reqs; i++) {
3541         mcb->callbacks[i].cb = reqs[i].cb;
3542         mcb->callbacks[i].opaque = reqs[i].opaque;
3543     }
3544 
3545     // Check for mergable requests
3546     num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3547 
3548     trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3549 
3550     /* Run the aio requests. */
3551     mcb->num_requests = num_reqs;
3552     for (i = 0; i < num_reqs; i++) {
3553         bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3554             reqs[i].nb_sectors, multiwrite_cb, mcb);
3555     }
3556 
3557     return 0;
3558 }
3559 
3560 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3561 {
3562     acb->aiocb_info->cancel(acb);
3563 }
3564 
3565 /* block I/O throttling */
3566 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
3567                  bool is_write, double elapsed_time, uint64_t *wait)
3568 {
3569     uint64_t bps_limit = 0;
3570     uint64_t extension;
3571     double   bytes_limit, bytes_base, bytes_res;
3572     double   slice_time, wait_time;
3573 
3574     if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3575         bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
3576     } else if (bs->io_limits.bps[is_write]) {
3577         bps_limit = bs->io_limits.bps[is_write];
3578     } else {
3579         if (wait) {
3580             *wait = 0;
3581         }
3582 
3583         return false;
3584     }
3585 
3586     slice_time = bs->slice_end - bs->slice_start;
3587     slice_time /= (NANOSECONDS_PER_SECOND);
3588     bytes_limit = bps_limit * slice_time;
3589     bytes_base  = bs->slice_submitted.bytes[is_write];
3590     if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3591         bytes_base += bs->slice_submitted.bytes[!is_write];
3592     }
3593 
3594     /* bytes_base: the bytes of data which have been read/written; and
3595      *             it is obtained from the history statistic info.
3596      * bytes_res: the remaining bytes of data which need to be read/written.
3597      * (bytes_base + bytes_res) / bps_limit: used to calcuate
3598      *             the total time for completing reading/writting all data.
3599      */
3600     bytes_res   = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
3601 
3602     if (bytes_base + bytes_res <= bytes_limit) {
3603         if (wait) {
3604             *wait = 0;
3605         }
3606 
3607         return false;
3608     }
3609 
3610     /* Calc approx time to dispatch */
3611     wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;
3612 
3613     /* When the I/O rate at runtime exceeds the limits,
3614      * bs->slice_end need to be extended in order that the current statistic
3615      * info can be kept until the timer fire, so it is increased and tuned
3616      * based on the result of experiment.
3617      */
3618     extension = wait_time * NANOSECONDS_PER_SECOND;
3619     extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
3620                 BLOCK_IO_SLICE_TIME;
3621     bs->slice_end += extension;
3622     if (wait) {
3623         *wait = wait_time * NANOSECONDS_PER_SECOND;
3624     }
3625 
3626     return true;
3627 }
3628 
3629 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
3630                              double elapsed_time, uint64_t *wait)
3631 {
3632     uint64_t iops_limit = 0;
3633     double   ios_limit, ios_base;
3634     double   slice_time, wait_time;
3635 
3636     if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3637         iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
3638     } else if (bs->io_limits.iops[is_write]) {
3639         iops_limit = bs->io_limits.iops[is_write];
3640     } else {
3641         if (wait) {
3642             *wait = 0;
3643         }
3644 
3645         return false;
3646     }
3647 
3648     slice_time = bs->slice_end - bs->slice_start;
3649     slice_time /= (NANOSECONDS_PER_SECOND);
3650     ios_limit  = iops_limit * slice_time;
3651     ios_base   = bs->slice_submitted.ios[is_write];
3652     if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3653         ios_base += bs->slice_submitted.ios[!is_write];
3654     }
3655 
3656     if (ios_base + 1 <= ios_limit) {
3657         if (wait) {
3658             *wait = 0;
3659         }
3660 
3661         return false;
3662     }
3663 
3664     /* Calc approx time to dispatch, in seconds */
3665     wait_time = (ios_base + 1) / iops_limit;
3666     if (wait_time > elapsed_time) {
3667         wait_time = wait_time - elapsed_time;
3668     } else {
3669         wait_time = 0;
3670     }
3671 
3672     /* Exceeded current slice, extend it by another slice time */
3673     bs->slice_end += BLOCK_IO_SLICE_TIME;
3674     if (wait) {
3675         *wait = wait_time * NANOSECONDS_PER_SECOND;
3676     }
3677 
3678     return true;
3679 }
3680 
3681 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
3682                            bool is_write, int64_t *wait)
3683 {
3684     int64_t  now, max_wait;
3685     uint64_t bps_wait = 0, iops_wait = 0;
3686     double   elapsed_time;
3687     int      bps_ret, iops_ret;
3688 
3689     now = qemu_get_clock_ns(vm_clock);
3690     if (now > bs->slice_end) {
3691         bs->slice_start = now;
3692         bs->slice_end   = now + BLOCK_IO_SLICE_TIME;
3693         memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
3694     }
3695 
3696     elapsed_time  = now - bs->slice_start;
3697     elapsed_time  /= (NANOSECONDS_PER_SECOND);
3698 
3699     bps_ret  = bdrv_exceed_bps_limits(bs, nb_sectors,
3700                                       is_write, elapsed_time, &bps_wait);
3701     iops_ret = bdrv_exceed_iops_limits(bs, is_write,
3702                                       elapsed_time, &iops_wait);
3703     if (bps_ret || iops_ret) {
3704         max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
3705         if (wait) {
3706             *wait = max_wait;
3707         }
3708 
3709         now = qemu_get_clock_ns(vm_clock);
3710         if (bs->slice_end < now + max_wait) {
3711             bs->slice_end = now + max_wait;
3712         }
3713 
3714         return true;
3715     }
3716 
3717     if (wait) {
3718         *wait = 0;
3719     }
3720 
3721     bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
3722                                            BDRV_SECTOR_SIZE;
3723     bs->slice_submitted.ios[is_write]++;
3724 
3725     return false;
3726 }
3727 
3728 /**************************************************************/
3729 /* async block device emulation */
3730 
3731 typedef struct BlockDriverAIOCBSync {
3732     BlockDriverAIOCB common;
3733     QEMUBH *bh;
3734     int ret;
3735     /* vector translation state */
3736     QEMUIOVector *qiov;
3737     uint8_t *bounce;
3738     int is_write;
3739 } BlockDriverAIOCBSync;
3740 
3741 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
3742 {
3743     BlockDriverAIOCBSync *acb =
3744         container_of(blockacb, BlockDriverAIOCBSync, common);
3745     qemu_bh_delete(acb->bh);
3746     acb->bh = NULL;
3747     qemu_aio_release(acb);
3748 }
3749 
3750 static const AIOCBInfo bdrv_em_aiocb_info = {
3751     .aiocb_size         = sizeof(BlockDriverAIOCBSync),
3752     .cancel             = bdrv_aio_cancel_em,
3753 };
3754 
3755 static void bdrv_aio_bh_cb(void *opaque)
3756 {
3757     BlockDriverAIOCBSync *acb = opaque;
3758 
3759     if (!acb->is_write)
3760         qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
3761     qemu_vfree(acb->bounce);
3762     acb->common.cb(acb->common.opaque, acb->ret);
3763     qemu_bh_delete(acb->bh);
3764     acb->bh = NULL;
3765     qemu_aio_release(acb);
3766 }
3767 
3768 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
3769                                             int64_t sector_num,
3770                                             QEMUIOVector *qiov,
3771                                             int nb_sectors,
3772                                             BlockDriverCompletionFunc *cb,
3773                                             void *opaque,
3774                                             int is_write)
3775 
3776 {
3777     BlockDriverAIOCBSync *acb;
3778 
3779     acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
3780     acb->is_write = is_write;
3781     acb->qiov = qiov;
3782     acb->bounce = qemu_blockalign(bs, qiov->size);
3783     acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
3784 
3785     if (is_write) {
3786         qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
3787         acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
3788     } else {
3789         acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
3790     }
3791 
3792     qemu_bh_schedule(acb->bh);
3793 
3794     return &acb->common;
3795 }
3796 
3797 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
3798         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3799         BlockDriverCompletionFunc *cb, void *opaque)
3800 {
3801     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
3802 }
3803 
3804 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
3805         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3806         BlockDriverCompletionFunc *cb, void *opaque)
3807 {
3808     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
3809 }
3810 
3811 
3812 typedef struct BlockDriverAIOCBCoroutine {
3813     BlockDriverAIOCB common;
3814     BlockRequest req;
3815     bool is_write;
3816     bool *done;
3817     QEMUBH* bh;
3818 } BlockDriverAIOCBCoroutine;
3819 
3820 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
3821 {
3822     BlockDriverAIOCBCoroutine *acb =
3823         container_of(blockacb, BlockDriverAIOCBCoroutine, common);
3824     bool done = false;
3825 
3826     acb->done = &done;
3827     while (!done) {
3828         qemu_aio_wait();
3829     }
3830 }
3831 
3832 static const AIOCBInfo bdrv_em_co_aiocb_info = {
3833     .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
3834     .cancel             = bdrv_aio_co_cancel_em,
3835 };
3836 
3837 static void bdrv_co_em_bh(void *opaque)
3838 {
3839     BlockDriverAIOCBCoroutine *acb = opaque;
3840 
3841     acb->common.cb(acb->common.opaque, acb->req.error);
3842 
3843     if (acb->done) {
3844         *acb->done = true;
3845     }
3846 
3847     qemu_bh_delete(acb->bh);
3848     qemu_aio_release(acb);
3849 }
3850 
3851 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3852 static void coroutine_fn bdrv_co_do_rw(void *opaque)
3853 {
3854     BlockDriverAIOCBCoroutine *acb = opaque;
3855     BlockDriverState *bs = acb->common.bs;
3856 
3857     if (!acb->is_write) {
3858         acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
3859             acb->req.nb_sectors, acb->req.qiov, 0);
3860     } else {
3861         acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
3862             acb->req.nb_sectors, acb->req.qiov, 0);
3863     }
3864 
3865     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3866     qemu_bh_schedule(acb->bh);
3867 }
3868 
3869 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
3870                                                int64_t sector_num,
3871                                                QEMUIOVector *qiov,
3872                                                int nb_sectors,
3873                                                BlockDriverCompletionFunc *cb,
3874                                                void *opaque,
3875                                                bool is_write)
3876 {
3877     Coroutine *co;
3878     BlockDriverAIOCBCoroutine *acb;
3879 
3880     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3881     acb->req.sector = sector_num;
3882     acb->req.nb_sectors = nb_sectors;
3883     acb->req.qiov = qiov;
3884     acb->is_write = is_write;
3885     acb->done = NULL;
3886 
3887     co = qemu_coroutine_create(bdrv_co_do_rw);
3888     qemu_coroutine_enter(co, acb);
3889 
3890     return &acb->common;
3891 }
3892 
3893 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
3894 {
3895     BlockDriverAIOCBCoroutine *acb = opaque;
3896     BlockDriverState *bs = acb->common.bs;
3897 
3898     acb->req.error = bdrv_co_flush(bs);
3899     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3900     qemu_bh_schedule(acb->bh);
3901 }
3902 
3903 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
3904         BlockDriverCompletionFunc *cb, void *opaque)
3905 {
3906     trace_bdrv_aio_flush(bs, opaque);
3907 
3908     Coroutine *co;
3909     BlockDriverAIOCBCoroutine *acb;
3910 
3911     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3912     acb->done = NULL;
3913 
3914     co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
3915     qemu_coroutine_enter(co, acb);
3916 
3917     return &acb->common;
3918 }
3919 
3920 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
3921 {
3922     BlockDriverAIOCBCoroutine *acb = opaque;
3923     BlockDriverState *bs = acb->common.bs;
3924 
3925     acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
3926     acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3927     qemu_bh_schedule(acb->bh);
3928 }
3929 
3930 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
3931         int64_t sector_num, int nb_sectors,
3932         BlockDriverCompletionFunc *cb, void *opaque)
3933 {
3934     Coroutine *co;
3935     BlockDriverAIOCBCoroutine *acb;
3936 
3937     trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
3938 
3939     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3940     acb->req.sector = sector_num;
3941     acb->req.nb_sectors = nb_sectors;
3942     acb->done = NULL;
3943     co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
3944     qemu_coroutine_enter(co, acb);
3945 
3946     return &acb->common;
3947 }
3948 
3949 void bdrv_init(void)
3950 {
3951     module_call_init(MODULE_INIT_BLOCK);
3952 }
3953 
3954 void bdrv_init_with_whitelist(void)
3955 {
3956     use_bdrv_whitelist = 1;
3957     bdrv_init();
3958 }
3959 
3960 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
3961                    BlockDriverCompletionFunc *cb, void *opaque)
3962 {
3963     BlockDriverAIOCB *acb;
3964 
3965     acb = g_slice_alloc(aiocb_info->aiocb_size);
3966     acb->aiocb_info = aiocb_info;
3967     acb->bs = bs;
3968     acb->cb = cb;
3969     acb->opaque = opaque;
3970     return acb;
3971 }
3972 
3973 void qemu_aio_release(void *p)
3974 {
3975     BlockDriverAIOCB *acb = p;
3976     g_slice_free1(acb->aiocb_info->aiocb_size, acb);
3977 }
3978 
3979 /**************************************************************/
3980 /* Coroutine block device emulation */
3981 
3982 typedef struct CoroutineIOCompletion {
3983     Coroutine *coroutine;
3984     int ret;
3985 } CoroutineIOCompletion;
3986 
3987 static void bdrv_co_io_em_complete(void *opaque, int ret)
3988 {
3989     CoroutineIOCompletion *co = opaque;
3990 
3991     co->ret = ret;
3992     qemu_coroutine_enter(co->coroutine, NULL);
3993 }
3994 
3995 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
3996                                       int nb_sectors, QEMUIOVector *iov,
3997                                       bool is_write)
3998 {
3999     CoroutineIOCompletion co = {
4000         .coroutine = qemu_coroutine_self(),
4001     };
4002     BlockDriverAIOCB *acb;
4003 
4004     if (is_write) {
4005         acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4006                                        bdrv_co_io_em_complete, &co);
4007     } else {
4008         acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4009                                       bdrv_co_io_em_complete, &co);
4010     }
4011 
4012     trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4013     if (!acb) {
4014         return -EIO;
4015     }
4016     qemu_coroutine_yield();
4017 
4018     return co.ret;
4019 }
4020 
4021 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4022                                          int64_t sector_num, int nb_sectors,
4023                                          QEMUIOVector *iov)
4024 {
4025     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4026 }
4027 
4028 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4029                                          int64_t sector_num, int nb_sectors,
4030                                          QEMUIOVector *iov)
4031 {
4032     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4033 }
4034 
4035 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4036 {
4037     RwCo *rwco = opaque;
4038 
4039     rwco->ret = bdrv_co_flush(rwco->bs);
4040 }
4041 
4042 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4043 {
4044     int ret;
4045 
4046     if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4047         return 0;
4048     }
4049 
4050     /* Write back cached data to the OS even with cache=unsafe */
4051     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4052     if (bs->drv->bdrv_co_flush_to_os) {
4053         ret = bs->drv->bdrv_co_flush_to_os(bs);
4054         if (ret < 0) {
4055             return ret;
4056         }
4057     }
4058 
4059     /* But don't actually force it to the disk with cache=unsafe */
4060     if (bs->open_flags & BDRV_O_NO_FLUSH) {
4061         goto flush_parent;
4062     }
4063 
4064     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4065     if (bs->drv->bdrv_co_flush_to_disk) {
4066         ret = bs->drv->bdrv_co_flush_to_disk(bs);
4067     } else if (bs->drv->bdrv_aio_flush) {
4068         BlockDriverAIOCB *acb;
4069         CoroutineIOCompletion co = {
4070             .coroutine = qemu_coroutine_self(),
4071         };
4072 
4073         acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4074         if (acb == NULL) {
4075             ret = -EIO;
4076         } else {
4077             qemu_coroutine_yield();
4078             ret = co.ret;
4079         }
4080     } else {
4081         /*
4082          * Some block drivers always operate in either writethrough or unsafe
4083          * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4084          * know how the server works (because the behaviour is hardcoded or
4085          * depends on server-side configuration), so we can't ensure that
4086          * everything is safe on disk. Returning an error doesn't work because
4087          * that would break guests even if the server operates in writethrough
4088          * mode.
4089          *
4090          * Let's hope the user knows what he's doing.
4091          */
4092         ret = 0;
4093     }
4094     if (ret < 0) {
4095         return ret;
4096     }
4097 
4098     /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
4099      * in the case of cache=unsafe, so there are no useless flushes.
4100      */
4101 flush_parent:
4102     return bdrv_co_flush(bs->file);
4103 }
4104 
4105 void bdrv_invalidate_cache(BlockDriverState *bs)
4106 {
4107     if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4108         bs->drv->bdrv_invalidate_cache(bs);
4109     }
4110 }
4111 
4112 void bdrv_invalidate_cache_all(void)
4113 {
4114     BlockDriverState *bs;
4115 
4116     QTAILQ_FOREACH(bs, &bdrv_states, list) {
4117         bdrv_invalidate_cache(bs);
4118     }
4119 }
4120 
4121 void bdrv_clear_incoming_migration_all(void)
4122 {
4123     BlockDriverState *bs;
4124 
4125     QTAILQ_FOREACH(bs, &bdrv_states, list) {
4126         bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4127     }
4128 }
4129 
4130 int bdrv_flush(BlockDriverState *bs)
4131 {
4132     Coroutine *co;
4133     RwCo rwco = {
4134         .bs = bs,
4135         .ret = NOT_DONE,
4136     };
4137 
4138     if (qemu_in_coroutine()) {
4139         /* Fast-path if already in coroutine context */
4140         bdrv_flush_co_entry(&rwco);
4141     } else {
4142         co = qemu_coroutine_create(bdrv_flush_co_entry);
4143         qemu_coroutine_enter(co, &rwco);
4144         while (rwco.ret == NOT_DONE) {
4145             qemu_aio_wait();
4146         }
4147     }
4148 
4149     return rwco.ret;
4150 }
4151 
4152 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4153 {
4154     RwCo *rwco = opaque;
4155 
4156     rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4157 }
4158 
4159 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4160                                  int nb_sectors)
4161 {
4162     if (!bs->drv) {
4163         return -ENOMEDIUM;
4164     } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4165         return -EIO;
4166     } else if (bs->read_only) {
4167         return -EROFS;
4168     }
4169 
4170     if (bs->dirty_bitmap) {
4171         bdrv_reset_dirty(bs, sector_num, nb_sectors);
4172     }
4173 
4174     /* Do nothing if disabled.  */
4175     if (!(bs->open_flags & BDRV_O_UNMAP)) {
4176         return 0;
4177     }
4178 
4179     if (bs->drv->bdrv_co_discard) {
4180         return bs->drv->bdrv_co_discard(bs, sector_num, nb_sectors);
4181     } else if (bs->drv->bdrv_aio_discard) {
4182         BlockDriverAIOCB *acb;
4183         CoroutineIOCompletion co = {
4184             .coroutine = qemu_coroutine_self(),
4185         };
4186 
4187         acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4188                                         bdrv_co_io_em_complete, &co);
4189         if (acb == NULL) {
4190             return -EIO;
4191         } else {
4192             qemu_coroutine_yield();
4193             return co.ret;
4194         }
4195     } else {
4196         return 0;
4197     }
4198 }
4199 
4200 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4201 {
4202     Coroutine *co;
4203     RwCo rwco = {
4204         .bs = bs,
4205         .sector_num = sector_num,
4206         .nb_sectors = nb_sectors,
4207         .ret = NOT_DONE,
4208     };
4209 
4210     if (qemu_in_coroutine()) {
4211         /* Fast-path if already in coroutine context */
4212         bdrv_discard_co_entry(&rwco);
4213     } else {
4214         co = qemu_coroutine_create(bdrv_discard_co_entry);
4215         qemu_coroutine_enter(co, &rwco);
4216         while (rwco.ret == NOT_DONE) {
4217             qemu_aio_wait();
4218         }
4219     }
4220 
4221     return rwco.ret;
4222 }
4223 
4224 /**************************************************************/
4225 /* removable device support */
4226 
4227 /**
4228  * Return TRUE if the media is present
4229  */
4230 int bdrv_is_inserted(BlockDriverState *bs)
4231 {
4232     BlockDriver *drv = bs->drv;
4233 
4234     if (!drv)
4235         return 0;
4236     if (!drv->bdrv_is_inserted)
4237         return 1;
4238     return drv->bdrv_is_inserted(bs);
4239 }
4240 
4241 /**
4242  * Return whether the media changed since the last call to this
4243  * function, or -ENOTSUP if we don't know.  Most drivers don't know.
4244  */
4245 int bdrv_media_changed(BlockDriverState *bs)
4246 {
4247     BlockDriver *drv = bs->drv;
4248 
4249     if (drv && drv->bdrv_media_changed) {
4250         return drv->bdrv_media_changed(bs);
4251     }
4252     return -ENOTSUP;
4253 }
4254 
4255 /**
4256  * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4257  */
4258 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4259 {
4260     BlockDriver *drv = bs->drv;
4261 
4262     if (drv && drv->bdrv_eject) {
4263         drv->bdrv_eject(bs, eject_flag);
4264     }
4265 
4266     if (bs->device_name[0] != '\0') {
4267         bdrv_emit_qmp_eject_event(bs, eject_flag);
4268     }
4269 }
4270 
4271 /**
4272  * Lock or unlock the media (if it is locked, the user won't be able
4273  * to eject it manually).
4274  */
4275 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4276 {
4277     BlockDriver *drv = bs->drv;
4278 
4279     trace_bdrv_lock_medium(bs, locked);
4280 
4281     if (drv && drv->bdrv_lock_medium) {
4282         drv->bdrv_lock_medium(bs, locked);
4283     }
4284 }
4285 
4286 /* needed for generic scsi interface */
4287 
4288 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4289 {
4290     BlockDriver *drv = bs->drv;
4291 
4292     if (drv && drv->bdrv_ioctl)
4293         return drv->bdrv_ioctl(bs, req, buf);
4294     return -ENOTSUP;
4295 }
4296 
4297 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4298         unsigned long int req, void *buf,
4299         BlockDriverCompletionFunc *cb, void *opaque)
4300 {
4301     BlockDriver *drv = bs->drv;
4302 
4303     if (drv && drv->bdrv_aio_ioctl)
4304         return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4305     return NULL;
4306 }
4307 
4308 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4309 {
4310     bs->buffer_alignment = align;
4311 }
4312 
4313 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4314 {
4315     return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4316 }
4317 
4318 /*
4319  * Check if all memory in this vector is sector aligned.
4320  */
4321 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4322 {
4323     int i;
4324 
4325     for (i = 0; i < qiov->niov; i++) {
4326         if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4327             return false;
4328         }
4329     }
4330 
4331     return true;
4332 }
4333 
4334 void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
4335 {
4336     int64_t bitmap_size;
4337 
4338     assert((granularity & (granularity - 1)) == 0);
4339 
4340     if (granularity) {
4341         granularity >>= BDRV_SECTOR_BITS;
4342         assert(!bs->dirty_bitmap);
4343         bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4344         bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4345     } else {
4346         if (bs->dirty_bitmap) {
4347             hbitmap_free(bs->dirty_bitmap);
4348             bs->dirty_bitmap = NULL;
4349         }
4350     }
4351 }
4352 
4353 int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
4354 {
4355     if (bs->dirty_bitmap) {
4356         return hbitmap_get(bs->dirty_bitmap, sector);
4357     } else {
4358         return 0;
4359     }
4360 }
4361 
4362 void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
4363 {
4364     hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
4365 }
4366 
4367 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4368                     int nr_sectors)
4369 {
4370     hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
4371 }
4372 
4373 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
4374                       int nr_sectors)
4375 {
4376     hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
4377 }
4378 
4379 int64_t bdrv_get_dirty_count(BlockDriverState *bs)
4380 {
4381     if (bs->dirty_bitmap) {
4382         return hbitmap_count(bs->dirty_bitmap);
4383     } else {
4384         return 0;
4385     }
4386 }
4387 
4388 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4389 {
4390     assert(bs->in_use != in_use);
4391     bs->in_use = in_use;
4392 }
4393 
4394 int bdrv_in_use(BlockDriverState *bs)
4395 {
4396     return bs->in_use;
4397 }
4398 
4399 void bdrv_iostatus_enable(BlockDriverState *bs)
4400 {
4401     bs->iostatus_enabled = true;
4402     bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4403 }
4404 
4405 /* The I/O status is only enabled if the drive explicitly
4406  * enables it _and_ the VM is configured to stop on errors */
4407 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4408 {
4409     return (bs->iostatus_enabled &&
4410            (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4411             bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
4412             bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4413 }
4414 
4415 void bdrv_iostatus_disable(BlockDriverState *bs)
4416 {
4417     bs->iostatus_enabled = false;
4418 }
4419 
4420 void bdrv_iostatus_reset(BlockDriverState *bs)
4421 {
4422     if (bdrv_iostatus_is_enabled(bs)) {
4423         bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4424         if (bs->job) {
4425             block_job_iostatus_reset(bs->job);
4426         }
4427     }
4428 }
4429 
4430 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4431 {
4432     assert(bdrv_iostatus_is_enabled(bs));
4433     if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4434         bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4435                                          BLOCK_DEVICE_IO_STATUS_FAILED;
4436     }
4437 }
4438 
4439 void
4440 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4441         enum BlockAcctType type)
4442 {
4443     assert(type < BDRV_MAX_IOTYPE);
4444 
4445     cookie->bytes = bytes;
4446     cookie->start_time_ns = get_clock();
4447     cookie->type = type;
4448 }
4449 
4450 void
4451 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4452 {
4453     assert(cookie->type < BDRV_MAX_IOTYPE);
4454 
4455     bs->nr_bytes[cookie->type] += cookie->bytes;
4456     bs->nr_ops[cookie->type]++;
4457     bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4458 }
4459 
4460 void bdrv_img_create(const char *filename, const char *fmt,
4461                      const char *base_filename, const char *base_fmt,
4462                      char *options, uint64_t img_size, int flags,
4463                      Error **errp, bool quiet)
4464 {
4465     QEMUOptionParameter *param = NULL, *create_options = NULL;
4466     QEMUOptionParameter *backing_fmt, *backing_file, *size;
4467     BlockDriverState *bs = NULL;
4468     BlockDriver *drv, *proto_drv;
4469     BlockDriver *backing_drv = NULL;
4470     int ret = 0;
4471 
4472     /* Find driver and parse its options */
4473     drv = bdrv_find_format(fmt);
4474     if (!drv) {
4475         error_setg(errp, "Unknown file format '%s'", fmt);
4476         return;
4477     }
4478 
4479     proto_drv = bdrv_find_protocol(filename, true);
4480     if (!proto_drv) {
4481         error_setg(errp, "Unknown protocol '%s'", filename);
4482         return;
4483     }
4484 
4485     create_options = append_option_parameters(create_options,
4486                                               drv->create_options);
4487     create_options = append_option_parameters(create_options,
4488                                               proto_drv->create_options);
4489 
4490     /* Create parameter list with default values */
4491     param = parse_option_parameters("", create_options, param);
4492 
4493     set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4494 
4495     /* Parse -o options */
4496     if (options) {
4497         param = parse_option_parameters(options, create_options, param);
4498         if (param == NULL) {
4499             error_setg(errp, "Invalid options for file format '%s'.", fmt);
4500             goto out;
4501         }
4502     }
4503 
4504     if (base_filename) {
4505         if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4506                                  base_filename)) {
4507             error_setg(errp, "Backing file not supported for file format '%s'",
4508                        fmt);
4509             goto out;
4510         }
4511     }
4512 
4513     if (base_fmt) {
4514         if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4515             error_setg(errp, "Backing file format not supported for file "
4516                              "format '%s'", fmt);
4517             goto out;
4518         }
4519     }
4520 
4521     backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4522     if (backing_file && backing_file->value.s) {
4523         if (!strcmp(filename, backing_file->value.s)) {
4524             error_setg(errp, "Error: Trying to create an image with the "
4525                              "same filename as the backing file");
4526             goto out;
4527         }
4528     }
4529 
4530     backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4531     if (backing_fmt && backing_fmt->value.s) {
4532         backing_drv = bdrv_find_format(backing_fmt->value.s);
4533         if (!backing_drv) {
4534             error_setg(errp, "Unknown backing file format '%s'",
4535                        backing_fmt->value.s);
4536             goto out;
4537         }
4538     }
4539 
4540     // The size for the image must always be specified, with one exception:
4541     // If we are using a backing file, we can obtain the size from there
4542     size = get_option_parameter(param, BLOCK_OPT_SIZE);
4543     if (size && size->value.n == -1) {
4544         if (backing_file && backing_file->value.s) {
4545             uint64_t size;
4546             char buf[32];
4547             int back_flags;
4548 
4549             /* backing files always opened read-only */
4550             back_flags =
4551                 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4552 
4553             bs = bdrv_new("");
4554 
4555             ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4556                             backing_drv);
4557             if (ret < 0) {
4558                 error_setg_errno(errp, -ret, "Could not open '%s'",
4559                                  backing_file->value.s);
4560                 goto out;
4561             }
4562             bdrv_get_geometry(bs, &size);
4563             size *= 512;
4564 
4565             snprintf(buf, sizeof(buf), "%" PRId64, size);
4566             set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4567         } else {
4568             error_setg(errp, "Image creation needs a size parameter");
4569             goto out;
4570         }
4571     }
4572 
4573     if (!quiet) {
4574         printf("Formatting '%s', fmt=%s ", filename, fmt);
4575         print_option_parameters(param);
4576         puts("");
4577     }
4578     ret = bdrv_create(drv, filename, param);
4579     if (ret < 0) {
4580         if (ret == -ENOTSUP) {
4581             error_setg(errp,"Formatting or formatting option not supported for "
4582                             "file format '%s'", fmt);
4583         } else if (ret == -EFBIG) {
4584             const char *cluster_size_hint = "";
4585             if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4586                 cluster_size_hint = " (try using a larger cluster size)";
4587             }
4588             error_setg(errp, "The image size is too large for file format '%s'%s",
4589                        fmt, cluster_size_hint);
4590         } else {
4591             error_setg(errp, "%s: error while creating %s: %s", filename, fmt,
4592                        strerror(-ret));
4593         }
4594     }
4595 
4596 out:
4597     free_option_parameters(create_options);
4598     free_option_parameters(param);
4599 
4600     if (bs) {
4601         bdrv_delete(bs);
4602     }
4603 }
4604 
4605 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4606 {
4607     /* Currently BlockDriverState always uses the main loop AioContext */
4608     return qemu_get_aio_context();
4609 }
4610 
4611 void bdrv_add_before_write_notifier(BlockDriverState *bs,
4612                                     NotifierWithReturn *notifier)
4613 {
4614     notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
4615 }
4616