1#!/bin/sh 2# 3# qemu configure script (c) 2003 Fabrice Bellard 4# 5 6# Unset some variables known to interfere with behavior of common tools, 7# just as autoconf does. 8CLICOLOR_FORCE= GREP_OPTIONS= 9unset CLICOLOR_FORCE GREP_OPTIONS 10 11# Don't allow CCACHE, if present, to use cached results of compile tests! 12export CCACHE_RECACHE=yes 13 14# make source path absolute 15source_path=$(cd "$(dirname -- "$0")"; pwd) 16 17if test "$PWD" = "$source_path" 18then 19 echo "Using './build' as the directory for build output" 20 21 MARKER=build/auto-created-by-configure 22 23 if test -e build 24 then 25 if test -f $MARKER 26 then 27 rm -rf build 28 else 29 echo "ERROR: ./build dir already exists and was not previously created by configure" 30 exit 1 31 fi 32 fi 33 34 if ! mkdir build || ! touch $MARKER 35 then 36 echo "ERROR: Could not create ./build directory. Check the permissions on" 37 echo "your source directory, or try doing an out-of-tree build." 38 exit 1 39 fi 40 41 cat > GNUmakefile <<'EOF' 42# This file is auto-generated by configure to support in-source tree 43# 'make' command invocation 44 45ifeq ($(MAKECMDGOALS),) 46recurse: all 47endif 48 49.NOTPARALLEL: % 50%: force 51 @echo 'changing dir to build for $(MAKE) "$(MAKECMDGOALS)"...' 52 @$(MAKE) -C build -f Makefile $(MAKECMDGOALS) 53 @if test "$(MAKECMDGOALS)" = "distclean" && \ 54 test -e build/auto-created-by-configure ; \ 55 then \ 56 rm -rf build GNUmakefile ; \ 57 fi 58force: ; 59.PHONY: force 60GNUmakefile: ; 61 62EOF 63 cd build 64 exec "$source_path/configure" "$@" 65fi 66 67# Temporary directory used for files created while 68# configure runs. Since it is in the build directory 69# we can safely blow away any previous version of it 70# (and we need not jump through hoops to try to delete 71# it when configure exits.) 72TMPDIR1="config-temp" 73rm -rf "${TMPDIR1}" 74if ! mkdir -p "${TMPDIR1}"; then 75 echo "ERROR: failed to create temporary directory" 76 exit 1 77fi 78 79TMPB="qemu-conf" 80TMPC="${TMPDIR1}/${TMPB}.c" 81TMPO="${TMPDIR1}/${TMPB}.o" 82TMPM="${TMPDIR1}/${TMPB}.m" 83TMPE="${TMPDIR1}/${TMPB}.exe" 84 85rm -f config.log 86 87# Print a helpful header at the top of config.log 88echo "# QEMU configure log $(date)" >> config.log 89printf "# Configured with:" >> config.log 90# repeat the invocation to log and stdout for CI 91invoke=$(printf " '%s'" "$0" "$@") 92test -n "$GITLAB_CI" && echo "configuring with: $invoke" 93{ echo "$invoke"; echo; echo "#"; } >> config.log 94 95quote_sh() { 96 printf "%s" "$1" | sed "s,','\\\\'',g; s,.*,'&'," 97} 98 99print_error() { 100 (echo 101 echo "ERROR: $1" 102 while test -n "$2"; do 103 echo " $2" 104 shift 105 done 106 echo) >&2 107} 108 109error_exit() { 110 print_error "$@" 111 exit 1 112} 113 114do_compiler() { 115 # Run the compiler, capturing its output to the log. First argument 116 # is compiler binary to execute. 117 compiler="$1" 118 shift 119 if test -n "$BASH_VERSION"; then eval ' 120 echo >>config.log " 121funcs: ${FUNCNAME[*]} 122lines: ${BASH_LINENO[*]}" 123 '; fi 124 echo $compiler "$@" >> config.log 125 $compiler "$@" >> config.log 2>&1 || return $? 126} 127 128do_compiler_werror() { 129 # Run the compiler, capturing its output to the log. First argument 130 # is compiler binary to execute. 131 compiler="$1" 132 shift 133 if test -n "$BASH_VERSION"; then eval ' 134 echo >>config.log " 135funcs: ${FUNCNAME[*]} 136lines: ${BASH_LINENO[*]}" 137 '; fi 138 echo $compiler "$@" >> config.log 139 $compiler "$@" >> config.log 2>&1 || return $? 140 # Test passed. If this is an --enable-werror build, rerun 141 # the test with -Werror and bail out if it fails. This 142 # makes warning-generating-errors in configure test code 143 # obvious to developers. 144 if test "$werror" != "yes"; then 145 return 0 146 fi 147 # Don't bother rerunning the compile if we were already using -Werror 148 case "$*" in 149 *-Werror*) 150 return 0 151 ;; 152 esac 153 echo $compiler -Werror "$@" >> config.log 154 $compiler -Werror "$@" >> config.log 2>&1 && return $? 155 error_exit "configure test passed without -Werror but failed with -Werror." \ 156 "This is probably a bug in the configure script. The failing command" \ 157 "will be at the bottom of config.log." \ 158 "You can run configure with --disable-werror to bypass this check." 159} 160 161do_cc() { 162 do_compiler_werror "$cc" $CPU_CFLAGS "$@" 163} 164 165do_objc() { 166 do_compiler_werror "$objcc" $CPU_CFLAGS "$@" 167} 168 169# Append $2 to the variable named $1, with space separation 170add_to() { 171 eval $1=\${$1:+\"\$$1 \"}\$2 172} 173 174compile_object() { 175 local_cflags="$1" 176 do_cc $CFLAGS $EXTRA_CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC 177} 178 179compile_prog() { 180 local_cflags="$1" 181 local_ldflags="$2" 182 do_cc $CFLAGS $EXTRA_CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC \ 183 $LDFLAGS $EXTRA_LDFLAGS $CONFIGURE_LDFLAGS $QEMU_LDFLAGS $local_ldflags 184} 185 186# symbolically link $1 to $2. Portable version of "ln -sf". 187symlink() { 188 rm -rf "$2" 189 mkdir -p "$(dirname "$2")" 190 ln -s "$1" "$2" 191} 192 193# check whether a command is available to this shell (may be either an 194# executable or a builtin) 195has() { 196 type "$1" >/dev/null 2>&1 197} 198 199version_ge () { 200 local_ver1=$(expr "$1" : '\([0-9.]*\)' | tr . ' ') 201 local_ver2=$(echo "$2" | tr . ' ') 202 while true; do 203 set x $local_ver1 204 local_first=${2-0} 205 # 'shift 2' if $2 is set, or 'shift' if $2 is not set 206 shift ${2:+2} 207 local_ver1=$* 208 set x $local_ver2 209 # the second argument finished, the first must be greater or equal 210 test $# = 1 && return 0 211 test $local_first -lt $2 && return 1 212 test $local_first -gt $2 && return 0 213 shift ${2:+2} 214 local_ver2=$* 215 done 216} 217 218if printf %s\\n "$source_path" "$PWD" | grep -q "[[:space:]:]"; 219then 220 error_exit "main directory cannot contain spaces nor colons" 221fi 222 223# default parameters 224cpu="" 225static="no" 226cross_compile="no" 227cross_prefix="" 228host_cc="cc" 229stack_protector="" 230safe_stack="" 231use_containers="yes" 232gdb_bin=$(command -v "gdb-multiarch" || command -v "gdb") 233gdb_arches="" 234glib_has_gslice="no" 235 236if test -e "$source_path/.git" 237then 238 git_submodules_action="update" 239else 240 git_submodules_action="ignore" 241fi 242 243git_submodules="ui/keycodemapdb" 244git="git" 245 246# Don't accept a target_list environment variable. 247unset target_list 248unset target_list_exclude 249 250# Default value for a variable defining feature "foo". 251# * foo="no" feature will only be used if --enable-foo arg is given 252# * foo="" feature will be searched for, and if found, will be used 253# unless --disable-foo is given 254# * foo="yes" this value will only be set by --enable-foo flag. 255# feature will searched for, 256# if not found, configure exits with error 257# 258# Always add --enable-foo and --disable-foo command line args. 259# Distributions want to ensure that several features are compiled in, and it 260# is impossible without a --enable-foo that exits if a feature is not found. 261 262default_feature="" 263# parse CC options second 264for opt do 265 optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') 266 case "$opt" in 267 --without-default-features) 268 default_feature="no" 269 ;; 270 esac 271done 272 273EXTRA_CFLAGS="" 274EXTRA_CXXFLAGS="" 275EXTRA_OBJCFLAGS="" 276EXTRA_LDFLAGS="" 277 278debug_tcg="no" 279sanitizers="no" 280tsan="no" 281fortify_source="yes" 282EXESUF="" 283modules="no" 284prefix="/usr/local" 285qemu_suffix="qemu" 286softmmu="yes" 287linux_user="" 288bsd_user="" 289pie="" 290coroutine="" 291plugins="$default_feature" 292meson="" 293ninja="" 294bindir="bin" 295skip_meson=no 296vfio_user_server="disabled" 297 298# The following Meson options are handled manually (still they 299# are included in the automatically generated help message) 300 301# 1. Track which submodules are needed 302fdt="auto" 303 304# 2. Automatically enable/disable other options 305tcg="auto" 306cfi="false" 307 308# parse CC options second 309for opt do 310 optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') 311 case "$opt" in 312 --cross-prefix=*) cross_prefix="$optarg" 313 cross_compile="yes" 314 ;; 315 --cc=*) CC="$optarg" 316 ;; 317 --cxx=*) CXX="$optarg" 318 ;; 319 --cpu=*) cpu="$optarg" 320 ;; 321 --extra-cflags=*) 322 EXTRA_CFLAGS="$EXTRA_CFLAGS $optarg" 323 EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS $optarg" 324 EXTRA_OBJCFLAGS="$EXTRA_OBJCFLAGS $optarg" 325 ;; 326 --extra-cxxflags=*) EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS $optarg" 327 ;; 328 --extra-objcflags=*) EXTRA_OBJCFLAGS="$EXTRA_OBJCFLAGS $optarg" 329 ;; 330 --extra-ldflags=*) EXTRA_LDFLAGS="$EXTRA_LDFLAGS $optarg" 331 ;; 332 --cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option" 333 ;; 334 --cross-cc-cflags-*) cc_arch=${opt#--cross-cc-cflags-}; cc_arch=${cc_arch%%=*} 335 eval "cross_cc_cflags_${cc_arch}=\$optarg" 336 ;; 337 --cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*} 338 eval "cross_cc_${cc_arch}=\$optarg" 339 ;; 340 --cross-prefix-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-prefix-FOO option" 341 ;; 342 --cross-prefix-*) cc_arch=${opt#--cross-prefix-}; cc_arch=${cc_arch%%=*} 343 eval "cross_prefix_${cc_arch}=\$optarg" 344 ;; 345 esac 346done 347 348# Preferred compiler: 349# ${CC} (if set) 350# ${cross_prefix}gcc (if cross-prefix specified) 351# system compiler 352if test -z "${CC}${cross_prefix}"; then 353 cc="$host_cc" 354else 355 cc="${CC-${cross_prefix}gcc}" 356fi 357 358if test -z "${CXX}${cross_prefix}"; then 359 cxx="c++" 360else 361 cxx="${CXX-${cross_prefix}g++}" 362fi 363 364ar="${AR-${cross_prefix}ar}" 365as="${AS-${cross_prefix}as}" 366ccas="${CCAS-$cc}" 367objcopy="${OBJCOPY-${cross_prefix}objcopy}" 368ld="${LD-${cross_prefix}ld}" 369ranlib="${RANLIB-${cross_prefix}ranlib}" 370nm="${NM-${cross_prefix}nm}" 371smbd="$SMBD" 372strip="${STRIP-${cross_prefix}strip}" 373widl="${WIDL-${cross_prefix}widl}" 374windres="${WINDRES-${cross_prefix}windres}" 375windmc="${WINDMC-${cross_prefix}windmc}" 376pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}" 377query_pkg_config() { 378 "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@" 379} 380pkg_config=query_pkg_config 381sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}" 382 383# default flags for all hosts 384# We use -fwrapv to tell the compiler that we require a C dialect where 385# left shift of signed integers is well defined and has the expected 386# 2s-complement style results. (Both clang and gcc agree that it 387# provides these semantics.) 388QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv" 389QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS" 390 391QEMU_LDFLAGS= 392 393# Flags that are needed during configure but later taken care of by Meson 394CONFIGURE_CFLAGS="-std=gnu11 -Wall" 395CONFIGURE_LDFLAGS= 396 397 398check_define() { 399cat > $TMPC <<EOF 400#if !defined($1) 401#error $1 not defined 402#endif 403int main(void) { return 0; } 404EOF 405 compile_object 406} 407 408check_include() { 409cat > $TMPC <<EOF 410#include <$1> 411int main(void) { return 0; } 412EOF 413 compile_object 414} 415 416write_c_skeleton() { 417 cat > $TMPC <<EOF 418int main(void) { return 0; } 419EOF 420} 421 422if check_define __linux__ ; then 423 targetos=linux 424elif check_define _WIN32 ; then 425 targetos=windows 426elif check_define __OpenBSD__ ; then 427 targetos=openbsd 428elif check_define __sun__ ; then 429 targetos=sunos 430elif check_define __HAIKU__ ; then 431 targetos=haiku 432elif check_define __FreeBSD__ ; then 433 targetos=freebsd 434elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then 435 targetos=gnu/kfreebsd 436elif check_define __DragonFly__ ; then 437 targetos=dragonfly 438elif check_define __NetBSD__; then 439 targetos=netbsd 440elif check_define __APPLE__; then 441 targetos=darwin 442else 443 # This is a fatal error, but don't report it yet, because we 444 # might be going to just print the --help text, or it might 445 # be the result of a missing compiler. 446 targetos=bogus 447fi 448 449# OS specific 450 451mingw32="no" 452bsd="no" 453linux="no" 454solaris="no" 455case $targetos in 456windows) 457 mingw32="yes" 458 plugins="no" 459 pie="no" 460;; 461gnu/kfreebsd) 462 bsd="yes" 463;; 464freebsd) 465 bsd="yes" 466 make="${MAKE-gmake}" 467 # needed for kinfo_getvmmap(3) in libutil.h 468;; 469dragonfly) 470 bsd="yes" 471 make="${MAKE-gmake}" 472;; 473netbsd) 474 bsd="yes" 475 make="${MAKE-gmake}" 476;; 477openbsd) 478 bsd="yes" 479 make="${MAKE-gmake}" 480;; 481darwin) 482 bsd="yes" 483 darwin="yes" 484 # Disable attempts to use ObjectiveC features in os/object.h since they 485 # won't work when we're compiling with gcc as a C compiler. 486 QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" 487;; 488sunos) 489 solaris="yes" 490 make="${MAKE-gmake}" 491# needed for CMSG_ macros in sys/socket.h 492 QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS" 493# needed for TIOCWIN* defines in termios.h 494 QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS" 495;; 496haiku) 497 pie="no" 498 QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS -D_BSD_SOURCE -fPIC $QEMU_CFLAGS" 499;; 500linux) 501 linux="yes" 502;; 503esac 504 505if test ! -z "$cpu" ; then 506 # command line argument 507 : 508elif check_define __i386__ ; then 509 cpu="i386" 510elif check_define __x86_64__ ; then 511 if check_define __ILP32__ ; then 512 cpu="x32" 513 else 514 cpu="x86_64" 515 fi 516elif check_define __sparc__ ; then 517 if check_define __arch64__ ; then 518 cpu="sparc64" 519 else 520 cpu="sparc" 521 fi 522elif check_define _ARCH_PPC ; then 523 if check_define _ARCH_PPC64 ; then 524 if check_define _LITTLE_ENDIAN ; then 525 cpu="ppc64le" 526 else 527 cpu="ppc64" 528 fi 529 else 530 cpu="ppc" 531 fi 532elif check_define __mips__ ; then 533 cpu="mips" 534elif check_define __s390__ ; then 535 if check_define __s390x__ ; then 536 cpu="s390x" 537 else 538 cpu="s390" 539 fi 540elif check_define __riscv ; then 541 cpu="riscv" 542elif check_define __arm__ ; then 543 cpu="arm" 544elif check_define __aarch64__ ; then 545 cpu="aarch64" 546elif check_define __loongarch64 ; then 547 cpu="loongarch64" 548else 549 # Using uname is really broken, but it is just a fallback for architectures 550 # that are going to use TCI anyway 551 cpu=$(uname -m) 552 echo "WARNING: unrecognized host CPU, proceeding with 'uname -m' output '$cpu'" 553fi 554 555# Normalise host CPU name and set multilib cflags. The canonicalization 556# isn't really necessary, because the architectures that we check for 557# should not hit the 'uname -m' case, but better safe than sorry. 558# Note that this case should only have supported host CPUs, not guests. 559case "$cpu" in 560 armv*b|armv*l|arm) 561 cpu="arm" ;; 562 563 i386|i486|i586|i686) 564 cpu="i386" 565 CPU_CFLAGS="-m32" ;; 566 x32) 567 cpu="x86_64" 568 CPU_CFLAGS="-mx32" ;; 569 x86_64|amd64) 570 cpu="x86_64" 571 # ??? Only extremely old AMD cpus do not have cmpxchg16b. 572 # If we truly care, we should simply detect this case at 573 # runtime and generate the fallback to serial emulation. 574 CPU_CFLAGS="-m64 -mcx16" ;; 575 576 mips*) 577 cpu="mips" ;; 578 579 ppc) 580 CPU_CFLAGS="-m32" ;; 581 ppc64) 582 CPU_CFLAGS="-m64 -mbig-endian" ;; 583 ppc64le) 584 cpu="ppc64" 585 CPU_CFLAGS="-m64 -mlittle-endian" ;; 586 587 s390) 588 CPU_CFLAGS="-m31" ;; 589 s390x) 590 CPU_CFLAGS="-m64" ;; 591 592 sparc|sun4[cdmuv]) 593 cpu="sparc" 594 CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc" ;; 595 sparc64) 596 CPU_CFLAGS="-m64 -mcpu=ultrasparc" ;; 597esac 598 599: ${make=${MAKE-make}} 600 601 602check_py_version() { 603 # We require python >= 3.6. 604 # NB: a True python conditional creates a non-zero return code (Failure) 605 "$1" -c 'import sys; sys.exit(sys.version_info < (3,6))' 606} 607 608python= 609first_python= 610if test -z "${PYTHON}"; then 611 explicit_python=no 612 # A bare 'python' is traditionally python 2.x, but some distros 613 # have it as python 3.x, so check in both places. 614 for binary in python3 python python3.11 python3.10 python3.9 python3.8 python3.7 python3.6; do 615 if has "$binary"; then 616 python=$(command -v "$binary") 617 if check_py_version "$python"; then 618 # This one is good. 619 first_python= 620 break 621 else 622 first_python=$python 623 fi 624 fi 625 done 626else 627 # Same as above, but only check the environment variable. 628 has "${PYTHON}" || error_exit "The PYTHON environment variable does not point to an executable" 629 python=$(command -v "$PYTHON") 630 explicit_python=yes 631 if check_py_version "$python"; then 632 # This one is good. 633 first_python= 634 else 635 first_python=$first_python 636 fi 637fi 638 639# Check for ancillary tools used in testing 640genisoimage= 641for binary in genisoimage mkisofs 642do 643 if has $binary 644 then 645 genisoimage=$(command -v "$binary") 646 break 647 fi 648done 649 650# Default objcc to clang if available, otherwise use CC 651if has clang; then 652 objcc=clang 653else 654 objcc="$cc" 655fi 656 657if test "$mingw32" = "yes" ; then 658 EXESUF=".exe" 659 # MinGW needs -mthreads for TLS and macro _MT. 660 CONFIGURE_CFLAGS="-mthreads $CONFIGURE_CFLAGS" 661 prefix="/qemu" 662 bindir="" 663 qemu_suffix="" 664fi 665 666werror="" 667 668meson_option_build_array() { 669 printf '[' 670 (if test "$targetos" = windows; then 671 IFS=\; 672 else 673 IFS=: 674 fi 675 for e in $1; do 676 printf '"""' 677 # backslash escape any '\' and '"' characters 678 printf "%s" "$e" | sed -e 's/\([\"]\)/\\\1/g' 679 printf '""",' 680 done) 681 printf ']\n' 682} 683 684. "$source_path/scripts/meson-buildoptions.sh" 685 686meson_options= 687meson_option_add() { 688 meson_options="$meson_options $(quote_sh "$1")" 689} 690meson_option_parse() { 691 meson_options="$meson_options $(_meson_option_parse "$@")" 692 if test $? -eq 1; then 693 echo "ERROR: unknown option $1" 694 echo "Try '$0 --help' for more information" 695 exit 1 696 fi 697} 698 699for opt do 700 optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') 701 case "$opt" in 702 --help|-h) show_help=yes 703 ;; 704 --version|-V) exec cat "$source_path/VERSION" 705 ;; 706 --prefix=*) prefix="$optarg" 707 ;; 708 --cross-prefix=*) 709 ;; 710 --cc=*) 711 ;; 712 --host-cc=*) host_cc="$optarg" 713 ;; 714 --cxx=*) 715 ;; 716 --objcc=*) objcc="$optarg" 717 ;; 718 --make=*) make="$optarg" 719 ;; 720 --install=*) 721 ;; 722 --python=*) python="$optarg" ; explicit_python=yes 723 ;; 724 --skip-meson) skip_meson=yes 725 ;; 726 --meson=*) meson="$optarg" 727 ;; 728 --ninja=*) ninja="$optarg" 729 ;; 730 --smbd=*) smbd="$optarg" 731 ;; 732 --extra-cflags=*) 733 ;; 734 --extra-cxxflags=*) 735 ;; 736 --extra-objcflags=*) 737 ;; 738 --extra-ldflags=*) 739 ;; 740 --cross-cc-*) 741 ;; 742 --cross-prefix-*) 743 ;; 744 --enable-debug-info) meson_option_add -Ddebug=true 745 ;; 746 --disable-debug-info) meson_option_add -Ddebug=false 747 ;; 748 --enable-modules) 749 modules="yes" 750 ;; 751 --disable-modules) 752 modules="no" 753 ;; 754 --cpu=*) 755 ;; 756 --target-list=*) target_list="$optarg" 757 if test "$target_list_exclude"; then 758 error_exit "Can't mix --target-list with --target-list-exclude" 759 fi 760 ;; 761 --target-list-exclude=*) target_list_exclude="$optarg" 762 if test "$target_list"; then 763 error_exit "Can't mix --target-list-exclude with --target-list" 764 fi 765 ;; 766 --with-default-devices) meson_option_add -Ddefault_devices=true 767 ;; 768 --without-default-devices) meson_option_add -Ddefault_devices=false 769 ;; 770 --with-devices-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --with-devices-FOO option" 771 ;; 772 --with-devices-*) device_arch=${opt#--with-devices-}; 773 device_arch=${device_arch%%=*} 774 cf=$source_path/configs/devices/$device_arch-softmmu/$optarg.mak 775 if test -f "$cf"; then 776 device_archs="$device_archs $device_arch" 777 eval "devices_${device_arch}=\$optarg" 778 else 779 error_exit "File $cf does not exist" 780 fi 781 ;; 782 --without-default-features) # processed above 783 ;; 784 --static) 785 static="yes" 786 QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS" 787 ;; 788 --bindir=*) bindir="$optarg" 789 ;; 790 --with-suffix=*) qemu_suffix="$optarg" 791 ;; 792 --host=*|--build=*|\ 793 --disable-dependency-tracking|\ 794 --sbindir=*|--sharedstatedir=*|\ 795 --oldincludedir=*|--datarootdir=*|--infodir=*|\ 796 --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*) 797 # These switches are silently ignored, for compatibility with 798 # autoconf-generated configure scripts. This allows QEMU's 799 # configure to be used by RPM and similar macros that set 800 # lots of directory switches by default. 801 ;; 802 --enable-debug-tcg) debug_tcg="yes" 803 ;; 804 --disable-debug-tcg) debug_tcg="no" 805 ;; 806 --enable-debug) 807 # Enable debugging options that aren't excessively noisy 808 debug_tcg="yes" 809 meson_option_parse --enable-debug-mutex "" 810 meson_option_add -Doptimization=0 811 fortify_source="no" 812 ;; 813 --enable-sanitizers) sanitizers="yes" 814 ;; 815 --disable-sanitizers) sanitizers="no" 816 ;; 817 --enable-tsan) tsan="yes" 818 ;; 819 --disable-tsan) tsan="no" 820 ;; 821 --disable-tcg) tcg="disabled" 822 plugins="no" 823 ;; 824 --enable-tcg) tcg="enabled" 825 ;; 826 --disable-system) softmmu="no" 827 ;; 828 --enable-system) softmmu="yes" 829 ;; 830 --disable-user) 831 linux_user="no" ; 832 bsd_user="no" ; 833 ;; 834 --enable-user) ;; 835 --disable-linux-user) linux_user="no" 836 ;; 837 --enable-linux-user) linux_user="yes" 838 ;; 839 --disable-bsd-user) bsd_user="no" 840 ;; 841 --enable-bsd-user) bsd_user="yes" 842 ;; 843 --enable-pie) pie="yes" 844 ;; 845 --disable-pie) pie="no" 846 ;; 847 --enable-werror) werror="yes" 848 ;; 849 --disable-werror) werror="no" 850 ;; 851 --enable-stack-protector) stack_protector="yes" 852 ;; 853 --disable-stack-protector) stack_protector="no" 854 ;; 855 --enable-safe-stack) safe_stack="yes" 856 ;; 857 --disable-safe-stack) safe_stack="no" 858 ;; 859 --enable-cfi) 860 cfi="true"; 861 meson_option_add -Db_lto=true 862 ;; 863 --disable-cfi) cfi="false" 864 ;; 865 --disable-fdt) fdt="disabled" 866 ;; 867 --enable-fdt) fdt="enabled" 868 ;; 869 --enable-fdt=git) fdt="internal" 870 ;; 871 --enable-fdt=*) fdt="$optarg" 872 ;; 873 --with-coroutine=*) coroutine="$optarg" 874 ;; 875 --with-git=*) git="$optarg" 876 ;; 877 --with-git-submodules=*) 878 git_submodules_action="$optarg" 879 ;; 880 --enable-plugins) if test "$mingw32" = "yes"; then 881 error_exit "TCG plugins not currently supported on Windows platforms" 882 else 883 plugins="yes" 884 fi 885 ;; 886 --disable-plugins) plugins="no" 887 ;; 888 --enable-containers) use_containers="yes" 889 ;; 890 --disable-containers) use_containers="no" 891 ;; 892 --gdb=*) gdb_bin="$optarg" 893 ;; 894 --enable-vfio-user-server) vfio_user_server="enabled" 895 ;; 896 --disable-vfio-user-server) vfio_user_server="disabled" 897 ;; 898 # everything else has the same name in configure and meson 899 --*) meson_option_parse "$opt" "$optarg" 900 ;; 901 esac 902done 903 904# test for any invalid configuration combinations 905if test "$plugins" = "yes" -a "$tcg" = "disabled"; then 906 error_exit "Can't enable plugins on non-TCG builds" 907fi 908 909case $git_submodules_action in 910 update|validate) 911 if test ! -e "$source_path/.git"; then 912 echo "ERROR: cannot $git_submodules_action git submodules without .git" 913 exit 1 914 fi 915 ;; 916 ignore) 917 if ! test -f "$source_path/ui/keycodemapdb/README" 918 then 919 echo 920 echo "ERROR: missing GIT submodules" 921 echo 922 if test -e "$source_path/.git"; then 923 echo "--with-git-submodules=ignore specified but submodules were not" 924 echo "checked out. Please initialize and update submodules." 925 else 926 echo "This is not a GIT checkout but module content appears to" 927 echo "be missing. Do not use 'git archive' or GitHub download links" 928 echo "to acquire QEMU source archives. Non-GIT builds are only" 929 echo "supported with source archives linked from:" 930 echo 931 echo " https://www.qemu.org/download/#source" 932 echo 933 echo "Developers working with GIT can use scripts/archive-source.sh" 934 echo "if they need to create valid source archives." 935 fi 936 echo 937 exit 1 938 fi 939 ;; 940 *) 941 echo "ERROR: invalid --with-git-submodules= value '$git_submodules_action'" 942 exit 1 943 ;; 944esac 945 946default_target_list="" 947mak_wilds="" 948 949if [ "$linux_user" != no ]; then 950 if [ "$targetos" = linux ] && [ -d "$source_path/linux-user/include/host/$cpu" ]; then 951 linux_user=yes 952 elif [ "$linux_user" = yes ]; then 953 error_exit "linux-user not supported on this architecture" 954 fi 955fi 956if [ "$bsd_user" != no ]; then 957 if [ "$bsd_user" = "" ]; then 958 test $targetos = freebsd && bsd_user=yes 959 fi 960 if [ "$bsd_user" = yes ] && ! [ -d "$source_path/bsd-user/$targetos" ]; then 961 error_exit "bsd-user not supported on this host OS" 962 fi 963fi 964if [ "$softmmu" = "yes" ]; then 965 mak_wilds="${mak_wilds} $source_path/configs/targets/*-softmmu.mak" 966fi 967if [ "$linux_user" = "yes" ]; then 968 mak_wilds="${mak_wilds} $source_path/configs/targets/*-linux-user.mak" 969fi 970if [ "$bsd_user" = "yes" ]; then 971 mak_wilds="${mak_wilds} $source_path/configs/targets/*-bsd-user.mak" 972fi 973 974for config in $mak_wilds; do 975 target="$(basename "$config" .mak)" 976 if echo "$target_list_exclude" | grep -vq "$target"; then 977 default_target_list="${default_target_list} $target" 978 fi 979done 980 981if test x"$show_help" = x"yes" ; then 982cat << EOF 983 984Usage: configure [options] 985Options: [defaults in brackets after descriptions] 986 987Standard options: 988 --help print this message 989 --prefix=PREFIX install in PREFIX [$prefix] 990 --target-list=LIST set target list (default: build all) 991$(echo Available targets: $default_target_list | \ 992 fold -s -w 53 | sed -e 's/^/ /') 993 --target-list-exclude=LIST exclude a set of targets from the default target-list 994 995Advanced options (experts only): 996 --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] 997 --cc=CC use C compiler CC [$cc] 998 --host-cc=CC use C compiler CC [$host_cc] for code run at 999 build time 1000 --cxx=CXX use C++ compiler CXX [$cxx] 1001 --objcc=OBJCC use Objective-C compiler OBJCC [$objcc] 1002 --extra-cflags=CFLAGS append extra C compiler flags CFLAGS 1003 --extra-cxxflags=CXXFLAGS append extra C++ compiler flags CXXFLAGS 1004 --extra-objcflags=OBJCFLAGS append extra Objective C compiler flags OBJCFLAGS 1005 --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS 1006 --cross-cc-ARCH=CC use compiler when building ARCH guest test cases 1007 --cross-cc-cflags-ARCH= use compiler flags when building ARCH guest tests 1008 --cross-prefix-ARCH=PREFIX cross compiler prefix when building ARCH guest test cases 1009 --make=MAKE use specified make [$make] 1010 --python=PYTHON use specified python [$python] 1011 --meson=MESON use specified meson [$meson] 1012 --ninja=NINJA use specified ninja [$ninja] 1013 --smbd=SMBD use specified smbd [$smbd] 1014 --with-git=GIT use specified git [$git] 1015 --with-git-submodules=update update git submodules (default if .git dir exists) 1016 --with-git-submodules=validate fail if git submodules are not up to date 1017 --with-git-submodules=ignore do not update or check git submodules (default if no .git dir) 1018 --static enable static build [$static] 1019 --bindir=PATH install binaries in PATH 1020 --with-suffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir/docdir [$qemu_suffix] 1021 --without-default-features default all --enable-* options to "disabled" 1022 --without-default-devices do not include any device that is not needed to 1023 start the emulator (only use if you are including 1024 desired devices in configs/devices/) 1025 --with-devices-ARCH=NAME override default configs/devices 1026 --enable-debug enable common debug build options 1027 --enable-sanitizers enable default sanitizers 1028 --enable-tsan enable thread sanitizer 1029 --disable-werror disable compilation abort on warning 1030 --disable-stack-protector disable compiler-provided stack protection 1031 --cpu=CPU Build for host CPU [$cpu] 1032 --with-coroutine=BACKEND coroutine backend. Supported options: 1033 ucontext, sigaltstack, windows 1034 --enable-plugins 1035 enable plugins via shared library loading 1036 --disable-containers don't use containers for cross-building 1037 --gdb=GDB-path gdb to use for gdbstub tests [$gdb_bin] 1038EOF 1039 meson_options_help 1040cat << EOF 1041 system all system emulation targets 1042 user supported user emulation targets 1043 linux-user all linux usermode emulation targets 1044 bsd-user all BSD usermode emulation targets 1045 pie Position Independent Executables 1046 modules modules support (non-Windows) 1047 debug-tcg TCG debugging (default is disabled) 1048 debug-info debugging information 1049 safe-stack SafeStack Stack Smash Protection. Depends on 1050 clang/llvm and requires coroutine backend ucontext. 1051 1052NOTE: The object files are built at the place where configure is launched 1053EOF 1054exit 0 1055fi 1056 1057# Remove old dependency files to make sure that they get properly regenerated 1058rm -f ./*/config-devices.mak.d 1059 1060if test -z "$python" 1061then 1062 # If first_python is set, there was a binary somewhere even though 1063 # it was not suitable. Use it for the error message. 1064 if test -n "$first_python"; then 1065 error_exit "Cannot use '$first_python', Python >= 3.6 is required." \ 1066 "Use --python=/path/to/python to specify a supported Python." 1067 else 1068 error_exit "Python not found. Use --python=/path/to/python" 1069 fi 1070fi 1071 1072if ! has "$make" 1073then 1074 error_exit "GNU make ($make) not found" 1075fi 1076 1077if ! check_py_version "$python"; then 1078 error_exit "Cannot use '$python', Python >= 3.6 is required." \ 1079 "Use --python=/path/to/python to specify a supported Python." 1080fi 1081 1082# Resolve PATH + suppress writing compiled files 1083python="$(command -v "$python") -B" 1084 1085has_meson() { 1086 local python_dir=$(dirname "$python") 1087 # PEP405: pyvenv.cfg is either adjacent to the Python executable 1088 # or one directory above 1089 if test -f $python_dir/pyvenv.cfg || test -f $python_dir/../pyvenv.cfg; then 1090 # Ensure that Meson and Python come from the same virtual environment 1091 test -x "$python_dir/meson" && 1092 test "$(command -v meson)" -ef "$python_dir/meson" 1093 else 1094 has meson 1095 fi 1096} 1097 1098if test -z "$meson"; then 1099 if test "$explicit_python" = no && has_meson && version_ge "$(meson --version)" 0.61.5; then 1100 meson=meson 1101 elif test "$git_submodules_action" != 'ignore' ; then 1102 meson=git 1103 elif test -e "${source_path}/meson/meson.py" ; then 1104 meson=internal 1105 else 1106 if test "$explicit_python" = yes; then 1107 error_exit "--python requires using QEMU's embedded Meson distribution, but it was not found." 1108 else 1109 error_exit "Meson not found. Use --meson=/path/to/meson" 1110 fi 1111 fi 1112else 1113 # Meson uses its own Python interpreter to invoke other Python scripts, 1114 # but the user wants to use the one they specified with --python. 1115 # 1116 # We do not want to override the distro Python interpreter (and sometimes 1117 # cannot: for example in Homebrew /usr/bin/meson is a bash script), so 1118 # just require --meson=git|internal together with --python. 1119 if test "$explicit_python" = yes; then 1120 case "$meson" in 1121 git | internal) ;; 1122 *) error_exit "--python requires using QEMU's embedded Meson distribution." ;; 1123 esac 1124 fi 1125fi 1126 1127if test "$meson" = git; then 1128 git_submodules="${git_submodules} meson" 1129fi 1130 1131case "$meson" in 1132 git | internal) 1133 meson="$python ${source_path}/meson/meson.py" 1134 ;; 1135 *) meson=$(command -v "$meson") ;; 1136esac 1137 1138# Probe for ninja 1139 1140if test -z "$ninja"; then 1141 for c in ninja ninja-build samu; do 1142 if has $c; then 1143 ninja=$(command -v "$c") 1144 break 1145 fi 1146 done 1147 if test -z "$ninja"; then 1148 error_exit "Cannot find Ninja" 1149 fi 1150fi 1151 1152# Check that the C compiler works. Doing this here before testing 1153# the host CPU ensures that we had a valid CC to autodetect the 1154# $cpu var (and we should bail right here if that's not the case). 1155# It also allows the help message to be printed without a CC. 1156write_c_skeleton; 1157if compile_object ; then 1158 : C compiler works ok 1159else 1160 error_exit "\"$cc\" either does not exist or does not work" 1161fi 1162if ! compile_prog ; then 1163 error_exit "\"$cc\" cannot build an executable (is your linker broken?)" 1164fi 1165 1166# Consult white-list to determine whether to enable werror 1167# by default. Only enable by default for git builds 1168if test -z "$werror" ; then 1169 if test "$git_submodules_action" != "ignore" && \ 1170 { test "$linux" = "yes" || test "$mingw32" = "yes"; }; then 1171 werror="yes" 1172 else 1173 werror="no" 1174 fi 1175fi 1176 1177if test "$targetos" = "bogus"; then 1178 # Now that we know that we're not printing the help and that 1179 # the compiler works (so the results of the check_defines we used 1180 # to identify the OS are reliable), if we didn't recognize the 1181 # host OS we should stop now. 1182 error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')" 1183fi 1184 1185# Check whether the compiler matches our minimum requirements: 1186cat > $TMPC << EOF 1187#if defined(__clang_major__) && defined(__clang_minor__) 1188# ifdef __apple_build_version__ 1189# if __clang_major__ < 12 || (__clang_major__ == 12 && __clang_minor__ < 0) 1190# error You need at least XCode Clang v12.0 to compile QEMU 1191# endif 1192# else 1193# if __clang_major__ < 10 || (__clang_major__ == 10 && __clang_minor__ < 0) 1194# error You need at least Clang v10.0 to compile QEMU 1195# endif 1196# endif 1197#elif defined(__GNUC__) && defined(__GNUC_MINOR__) 1198# if __GNUC__ < 7 || (__GNUC__ == 7 && __GNUC_MINOR__ < 4) 1199# error You need at least GCC v7.4.0 to compile QEMU 1200# endif 1201#else 1202# error You either need GCC or Clang to compiler QEMU 1203#endif 1204int main (void) { return 0; } 1205EOF 1206if ! compile_prog "" "" ; then 1207 error_exit "You need at least GCC v7.4 or Clang v10.0 (or XCode Clang v12.0)" 1208fi 1209 1210# Accumulate -Wfoo and -Wno-bar separately. 1211# We will list all of the enable flags first, and the disable flags second. 1212# Note that we do not add -Werror, because that would enable it for all 1213# configure tests. If a configure test failed due to -Werror this would 1214# just silently disable some features, so it's too error prone. 1215 1216warn_flags= 1217add_to warn_flags -Wundef 1218add_to warn_flags -Wwrite-strings 1219add_to warn_flags -Wmissing-prototypes 1220add_to warn_flags -Wstrict-prototypes 1221add_to warn_flags -Wredundant-decls 1222add_to warn_flags -Wold-style-declaration 1223add_to warn_flags -Wold-style-definition 1224add_to warn_flags -Wtype-limits 1225add_to warn_flags -Wformat-security 1226add_to warn_flags -Wformat-y2k 1227add_to warn_flags -Winit-self 1228add_to warn_flags -Wignored-qualifiers 1229add_to warn_flags -Wempty-body 1230add_to warn_flags -Wnested-externs 1231add_to warn_flags -Wendif-labels 1232add_to warn_flags -Wexpansion-to-defined 1233add_to warn_flags -Wimplicit-fallthrough=2 1234add_to warn_flags -Wmissing-format-attribute 1235 1236if test "$targetos" != "darwin"; then 1237 add_to warn_flags -Wthread-safety 1238fi 1239 1240nowarn_flags= 1241add_to nowarn_flags -Wno-initializer-overrides 1242add_to nowarn_flags -Wno-missing-include-dirs 1243add_to nowarn_flags -Wno-shift-negative-value 1244add_to nowarn_flags -Wno-string-plus-int 1245add_to nowarn_flags -Wno-typedef-redefinition 1246add_to nowarn_flags -Wno-tautological-type-limit-compare 1247add_to nowarn_flags -Wno-psabi 1248add_to nowarn_flags -Wno-gnu-variable-sized-type-not-at-end 1249 1250gcc_flags="$warn_flags $nowarn_flags" 1251 1252cc_has_warning_flag() { 1253 write_c_skeleton; 1254 1255 # Use the positive sense of the flag when testing for -Wno-wombat 1256 # support (gcc will happily accept the -Wno- form of unknown 1257 # warning options). 1258 optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')" 1259 compile_prog "-Werror $optflag" "" 1260} 1261 1262objcc_has_warning_flag() { 1263 cat > $TMPM <<EOF 1264int main(void) { return 0; } 1265EOF 1266 1267 # Use the positive sense of the flag when testing for -Wno-wombat 1268 # support (gcc will happily accept the -Wno- form of unknown 1269 # warning options). 1270 optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')" 1271 do_objc -Werror $optflag \ 1272 $OBJCFLAGS $EXTRA_OBJCFLAGS $CONFIGURE_OBJCFLAGS $QEMU_OBJCFLAGS \ 1273 -o $TMPE $TMPM $QEMU_LDFLAGS 1274} 1275 1276for flag in $gcc_flags; do 1277 if cc_has_warning_flag $flag ; then 1278 QEMU_CFLAGS="$QEMU_CFLAGS $flag" 1279 fi 1280 if objcc_has_warning_flag $flag ; then 1281 QEMU_OBJCFLAGS="$QEMU_OBJCFLAGS $flag" 1282 fi 1283done 1284 1285if test "$stack_protector" != "no"; then 1286 cat > $TMPC << EOF 1287int main(int argc, char *argv[]) 1288{ 1289 char arr[64], *p = arr, *c = argv[argc - 1]; 1290 while (*c) { 1291 *p++ = *c++; 1292 } 1293 return 0; 1294} 1295EOF 1296 gcc_flags="-fstack-protector-strong -fstack-protector-all" 1297 sp_on=0 1298 for flag in $gcc_flags; do 1299 # We need to check both a compile and a link, since some compiler 1300 # setups fail only on a .c->.o compile and some only at link time 1301 if compile_object "-Werror $flag" && 1302 compile_prog "-Werror $flag" ""; then 1303 QEMU_CFLAGS="$QEMU_CFLAGS $flag" 1304 QEMU_LDFLAGS="$QEMU_LDFLAGS $flag" 1305 sp_on=1 1306 break 1307 fi 1308 done 1309 if test "$stack_protector" = yes; then 1310 if test $sp_on = 0; then 1311 error_exit "Stack protector not supported" 1312 fi 1313 fi 1314fi 1315 1316# Our module code doesn't support Windows 1317if test "$modules" = "yes" && test "$mingw32" = "yes" ; then 1318 error_exit "Modules are not available for Windows" 1319fi 1320 1321# Static linking is not possible with plugins, modules or PIE 1322if test "$static" = "yes" ; then 1323 if test "$modules" = "yes" ; then 1324 error_exit "static and modules are mutually incompatible" 1325 fi 1326 if test "$plugins" = "yes"; then 1327 error_exit "static and plugins are mutually incompatible" 1328 else 1329 plugins="no" 1330 fi 1331fi 1332test "$plugins" = "" && plugins=yes 1333 1334cat > $TMPC << EOF 1335 1336#ifdef __linux__ 1337# define THREAD __thread 1338#else 1339# define THREAD 1340#endif 1341static THREAD int tls_var; 1342int main(void) { return tls_var; } 1343EOF 1344 1345# Meson currently only handles pie as a boolean for now so if we have 1346# explicitly disabled PIE we need to extend our cflags because it wont. 1347if test "$static" = "yes"; then 1348 if test "$pie" != "no" && compile_prog "-Werror -fPIE -DPIE" "-static-pie"; then 1349 CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS" 1350 pie="yes" 1351 elif test "$pie" = "yes"; then 1352 error_exit "-static-pie not available due to missing toolchain support" 1353 else 1354 pie="no" 1355 QEMU_CFLAGS="-fno-pie $QEMU_CFLAGS" 1356 fi 1357elif test "$pie" = "no"; then 1358 if compile_prog "-Werror -fno-pie" "-no-pie"; then 1359 CONFIGURE_CFLAGS="-fno-pie $CONFIGURE_CFLAGS" 1360 CONFIGURE_LDFLAGS="-no-pie $CONFIGURE_LDFLAGS" 1361 QEMU_CFLAGS="-fno-pie -no-pie $QEMU_CFLAGS" 1362 fi 1363elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then 1364 CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS" 1365 CONFIGURE_LDFLAGS="-pie $CONFIGURE_LDFLAGS" 1366 pie="yes" 1367elif test "$pie" = "yes"; then 1368 error_exit "PIE not available due to missing toolchain support" 1369else 1370 echo "Disabling PIE due to missing toolchain support" 1371 pie="no" 1372fi 1373 1374########################################## 1375# __sync_fetch_and_and requires at least -march=i486. Many toolchains 1376# use i686 as default anyway, but for those that don't, an explicit 1377# specification is necessary 1378 1379if test "$cpu" = "i386"; then 1380 cat > $TMPC << EOF 1381static int sfaa(int *ptr) 1382{ 1383 return __sync_fetch_and_and(ptr, 0); 1384} 1385 1386int main(void) 1387{ 1388 int val = 42; 1389 val = __sync_val_compare_and_swap(&val, 0, 1); 1390 sfaa(&val); 1391 return val; 1392} 1393EOF 1394 if ! compile_prog "" "" ; then 1395 QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS" 1396 fi 1397fi 1398 1399if test -z "${target_list+xxx}" ; then 1400 default_targets=yes 1401 for target in $default_target_list; do 1402 target_list="$target_list $target" 1403 done 1404 target_list="${target_list# }" 1405else 1406 default_targets=no 1407 target_list=$(echo "$target_list" | sed -e 's/,/ /g') 1408 for target in $target_list; do 1409 # Check that we recognised the target name; this allows a more 1410 # friendly error message than if we let it fall through. 1411 case " $default_target_list " in 1412 *" $target "*) 1413 ;; 1414 *) 1415 error_exit "Unknown target name '$target'" 1416 ;; 1417 esac 1418 done 1419fi 1420 1421# see if system emulation was really requested 1422case " $target_list " in 1423 *"-softmmu "*) softmmu=yes 1424 ;; 1425 *) softmmu=no 1426 ;; 1427esac 1428 1429if test "$tcg" = "auto"; then 1430 if test -z "$target_list"; then 1431 tcg="disabled" 1432 else 1433 tcg="enabled" 1434 fi 1435fi 1436 1437if test "$tcg" = "enabled"; then 1438 git_submodules="$git_submodules tests/fp/berkeley-testfloat-3" 1439 git_submodules="$git_submodules tests/fp/berkeley-softfloat-3" 1440fi 1441 1442########################################## 1443# big/little endian test 1444cat > $TMPC << EOF 1445#if defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ 1446# error LITTLE 1447#endif 1448int main(void) { return 0; } 1449EOF 1450 1451if ! compile_prog ; then 1452 bigendian="no" 1453else 1454 cat > $TMPC << EOF 1455#if defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ 1456# error BIG 1457#endif 1458int main(void) { return 0; } 1459EOF 1460 1461 if ! compile_prog ; then 1462 bigendian="yes" 1463 else 1464 echo big/little test failed 1465 exit 1 1466 fi 1467fi 1468 1469########################################## 1470# pkg-config probe 1471 1472if ! has "$pkg_config_exe"; then 1473 error_exit "pkg-config binary '$pkg_config_exe' not found" 1474fi 1475 1476########################################## 1477# glib support probe 1478 1479# When bumping glib_req_ver, please check also whether we should increase 1480# the _WIN32_WINNT setting in osdep.h according to the value from glib 1481glib_req_ver=2.56 1482glib_modules=gthread-2.0 1483if test "$modules" = yes; then 1484 glib_modules="$glib_modules gmodule-export-2.0" 1485elif test "$plugins" = "yes"; then 1486 glib_modules="$glib_modules gmodule-no-export-2.0" 1487fi 1488 1489for i in $glib_modules; do 1490 if $pkg_config --atleast-version=$glib_req_ver $i; then 1491 glib_cflags=$($pkg_config --cflags $i) 1492 glib_libs=$($pkg_config --libs $i) 1493 else 1494 error_exit "glib-$glib_req_ver $i is required to compile QEMU" 1495 fi 1496done 1497 1498# Check whether glib has gslice, which we have to avoid for correctness. 1499# TODO: remove this check and the corresponding workaround (qtree) when 1500# the minimum supported glib is >= $glib_dropped_gslice_version. 1501glib_dropped_gslice_version=2.75.3 1502for i in $glib_modules; do 1503 if ! $pkg_config --atleast-version=$glib_dropped_gslice_version $i; then 1504 glib_has_gslice="yes" 1505 break 1506 fi 1507done 1508 1509glib_bindir="$($pkg_config --variable=bindir glib-2.0)" 1510if test -z "$glib_bindir" ; then 1511 glib_bindir="$($pkg_config --variable=prefix glib-2.0)"/bin 1512fi 1513 1514# This workaround is required due to a bug in pkg-config file for glib as it 1515# doesn't define GLIB_STATIC_COMPILATION for pkg-config --static 1516 1517if test "$static" = yes && test "$mingw32" = yes; then 1518 glib_cflags="-DGLIB_STATIC_COMPILATION $glib_cflags" 1519fi 1520 1521# Sanity check that the current size_t matches the 1522# size that glib thinks it should be. This catches 1523# problems on multi-arch where people try to build 1524# 32-bit QEMU while pointing at 64-bit glib headers 1525cat > $TMPC <<EOF 1526#include <glib.h> 1527#include <unistd.h> 1528 1529#define QEMU_BUILD_BUG_ON(x) \ 1530 typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused)); 1531 1532int main(void) { 1533 QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T); 1534 return 0; 1535} 1536EOF 1537 1538if ! compile_prog "$glib_cflags" "$glib_libs" ; then 1539 error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\ 1540 "You probably need to set PKG_CONFIG_LIBDIR"\ 1541 "to point to the right pkg-config files for your"\ 1542 "build target" 1543fi 1544 1545# Silence clang warnings triggered by glib < 2.57.2 1546cat > $TMPC << EOF 1547#include <glib.h> 1548typedef struct Foo { 1549 int i; 1550} Foo; 1551static void foo_free(Foo *f) 1552{ 1553 g_free(f); 1554} 1555G_DEFINE_AUTOPTR_CLEANUP_FUNC(Foo, foo_free) 1556int main(void) { return 0; } 1557EOF 1558if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then 1559 if cc_has_warning_flag "-Wno-unused-function"; then 1560 glib_cflags="$glib_cflags -Wno-unused-function" 1561 CONFIGURE_CFLAGS="$CONFIGURE_CFLAGS -Wno-unused-function" 1562 fi 1563fi 1564 1565########################################## 1566# fdt probe 1567 1568case "$fdt" in 1569 auto | enabled | internal) 1570 # Simpler to always update submodule, even if not needed. 1571 git_submodules="${git_submodules} dtc" 1572 ;; 1573esac 1574 1575########################################## 1576# check and set a backend for coroutine 1577 1578# We prefer ucontext, but it's not always possible. The fallback 1579# is sigcontext. On Windows the only valid backend is the Windows 1580# specific one. 1581 1582ucontext_works=no 1583if test "$darwin" != "yes"; then 1584 cat > $TMPC << EOF 1585#include <ucontext.h> 1586#ifdef __stub_makecontext 1587#error Ignoring glibc stub makecontext which will always fail 1588#endif 1589int main(void) { makecontext(0, 0, 0); return 0; } 1590EOF 1591 if compile_prog "" "" ; then 1592 ucontext_works=yes 1593 fi 1594fi 1595 1596if test "$coroutine" = ""; then 1597 if test "$mingw32" = "yes"; then 1598 coroutine=win32 1599 elif test "$ucontext_works" = "yes"; then 1600 coroutine=ucontext 1601 else 1602 coroutine=sigaltstack 1603 fi 1604else 1605 case $coroutine in 1606 windows) 1607 if test "$mingw32" != "yes"; then 1608 error_exit "'windows' coroutine backend only valid for Windows" 1609 fi 1610 # Unfortunately the user visible backend name doesn't match the 1611 # coroutine-*.c filename for this case, so we have to adjust it here. 1612 coroutine=win32 1613 ;; 1614 ucontext) 1615 if test "$ucontext_works" != "yes"; then 1616 error_exit "'ucontext' backend requested but makecontext not available" 1617 fi 1618 ;; 1619 sigaltstack) 1620 if test "$mingw32" = "yes"; then 1621 error_exit "only the 'windows' coroutine backend is valid for Windows" 1622 fi 1623 ;; 1624 *) 1625 error_exit "unknown coroutine backend $coroutine" 1626 ;; 1627 esac 1628fi 1629 1630################################################## 1631# SafeStack 1632 1633 1634if test "$safe_stack" = "yes"; then 1635cat > $TMPC << EOF 1636int main(void) 1637{ 1638#if ! __has_feature(safe_stack) 1639#error SafeStack Disabled 1640#endif 1641 return 0; 1642} 1643EOF 1644 flag="-fsanitize=safe-stack" 1645 # Check that safe-stack is supported and enabled. 1646 if compile_prog "-Werror $flag" "$flag"; then 1647 # Flag needed both at compilation and at linking 1648 QEMU_CFLAGS="$QEMU_CFLAGS $flag" 1649 QEMU_LDFLAGS="$QEMU_LDFLAGS $flag" 1650 else 1651 error_exit "SafeStack not supported by your compiler" 1652 fi 1653 if test "$coroutine" != "ucontext"; then 1654 error_exit "SafeStack is only supported by the coroutine backend ucontext" 1655 fi 1656else 1657cat > $TMPC << EOF 1658int main(void) 1659{ 1660#if defined(__has_feature) 1661#if __has_feature(safe_stack) 1662#error SafeStack Enabled 1663#endif 1664#endif 1665 return 0; 1666} 1667EOF 1668if test "$safe_stack" = "no"; then 1669 # Make sure that safe-stack is disabled 1670 if ! compile_prog "-Werror" ""; then 1671 # SafeStack was already enabled, try to explicitly remove the feature 1672 flag="-fno-sanitize=safe-stack" 1673 if ! compile_prog "-Werror $flag" "$flag"; then 1674 error_exit "Configure cannot disable SafeStack" 1675 fi 1676 QEMU_CFLAGS="$QEMU_CFLAGS $flag" 1677 QEMU_LDFLAGS="$QEMU_LDFLAGS $flag" 1678 fi 1679else # "$safe_stack" = "" 1680 # Set safe_stack to yes or no based on pre-existing flags 1681 if compile_prog "-Werror" ""; then 1682 safe_stack="no" 1683 else 1684 safe_stack="yes" 1685 if test "$coroutine" != "ucontext"; then 1686 error_exit "SafeStack is only supported by the coroutine backend ucontext" 1687 fi 1688 fi 1689fi 1690fi 1691 1692######################################## 1693# check if ccache is interfering with 1694# semantic analysis of macros 1695 1696unset CCACHE_CPP2 1697ccache_cpp2=no 1698cat > $TMPC << EOF 1699static const int Z = 1; 1700#define fn() ({ Z; }) 1701#define TAUT(X) ((X) == Z) 1702#define PAREN(X, Y) (X == Y) 1703#define ID(X) (X) 1704int main(void) 1705{ 1706 int x = 0, y = 0; 1707 x = ID(x); 1708 x = fn(); 1709 fn(); 1710 if (PAREN(x, y)) return 0; 1711 if (TAUT(Z)) return 0; 1712 return 0; 1713} 1714EOF 1715 1716if ! compile_object "-Werror"; then 1717 ccache_cpp2=yes 1718fi 1719 1720################################################# 1721# clang does not support glibc + FORTIFY_SOURCE. 1722 1723if test "$fortify_source" != "no"; then 1724 if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then 1725 fortify_source="no"; 1726 elif test -n "$cxx" && has $cxx && 1727 echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then 1728 fortify_source="no"; 1729 else 1730 fortify_source="yes" 1731 fi 1732fi 1733 1734########################################## 1735# checks for sanitizers 1736 1737have_asan=no 1738have_ubsan=no 1739have_asan_iface_h=no 1740have_asan_iface_fiber=no 1741 1742if test "$sanitizers" = "yes" ; then 1743 write_c_skeleton 1744 if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then 1745 have_asan=yes 1746 fi 1747 1748 # we could use a simple skeleton for flags checks, but this also 1749 # detect the static linking issue of ubsan, see also: 1750 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285 1751 cat > $TMPC << EOF 1752#include <stdlib.h> 1753int main(void) { 1754 void *tmp = malloc(10); 1755 if (tmp != NULL) { 1756 return *(int *)(tmp + 2); 1757 } 1758 return 1; 1759} 1760EOF 1761 if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then 1762 have_ubsan=yes 1763 fi 1764 1765 if check_include "sanitizer/asan_interface.h" ; then 1766 have_asan_iface_h=yes 1767 fi 1768 1769 cat > $TMPC << EOF 1770#include <sanitizer/asan_interface.h> 1771int main(void) { 1772 __sanitizer_start_switch_fiber(0, 0, 0); 1773 return 0; 1774} 1775EOF 1776 if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then 1777 have_asan_iface_fiber=yes 1778 fi 1779fi 1780 1781# Thread sanitizer is, for now, much noisier than the other sanitizers; 1782# keep it separate until that is not the case. 1783if test "$tsan" = "yes" && test "$sanitizers" = "yes"; then 1784 error_exit "TSAN is not supported with other sanitiziers." 1785fi 1786have_tsan=no 1787have_tsan_iface_fiber=no 1788if test "$tsan" = "yes" ; then 1789 write_c_skeleton 1790 if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then 1791 have_tsan=yes 1792 fi 1793 cat > $TMPC << EOF 1794#include <sanitizer/tsan_interface.h> 1795int main(void) { 1796 __tsan_create_fiber(0); 1797 return 0; 1798} 1799EOF 1800 if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then 1801 have_tsan_iface_fiber=yes 1802 fi 1803fi 1804 1805########################################## 1806# functions to probe cross compilers 1807 1808container="no" 1809runc="" 1810if test $use_containers = "yes" && (has "docker" || has "podman"); then 1811 case $($python "$source_path"/tests/docker/docker.py probe) in 1812 *docker) container=docker ;; 1813 podman) container=podman ;; 1814 no) container=no ;; 1815 esac 1816 if test "$container" != "no"; then 1817 docker_py="$python $source_path/tests/docker/docker.py --engine $container" 1818 runc=$($python "$source_path"/tests/docker/docker.py probe) 1819 fi 1820fi 1821 1822# cross compilers defaults, can be overridden with --cross-cc-ARCH 1823: ${cross_prefix_aarch64="aarch64-linux-gnu-"} 1824: ${cross_prefix_aarch64_be="$cross_prefix_aarch64"} 1825: ${cross_prefix_alpha="alpha-linux-gnu-"} 1826: ${cross_prefix_arm="arm-linux-gnueabihf-"} 1827: ${cross_prefix_armeb="$cross_prefix_arm"} 1828: ${cross_prefix_hexagon="hexagon-unknown-linux-musl-"} 1829: ${cross_prefix_loongarch64="loongarch64-unknown-linux-gnu-"} 1830: ${cross_prefix_hppa="hppa-linux-gnu-"} 1831: ${cross_prefix_i386="i686-linux-gnu-"} 1832: ${cross_prefix_m68k="m68k-linux-gnu-"} 1833: ${cross_prefix_microblaze="microblaze-linux-musl-"} 1834: ${cross_prefix_mips64el="mips64el-linux-gnuabi64-"} 1835: ${cross_prefix_mips64="mips64-linux-gnuabi64-"} 1836: ${cross_prefix_mipsel="mipsel-linux-gnu-"} 1837: ${cross_prefix_mips="mips-linux-gnu-"} 1838: ${cross_prefix_nios2="nios2-linux-gnu-"} 1839: ${cross_prefix_ppc="powerpc-linux-gnu-"} 1840: ${cross_prefix_ppc64="powerpc64-linux-gnu-"} 1841: ${cross_prefix_ppc64le="$cross_prefix_ppc64"} 1842: ${cross_prefix_riscv64="riscv64-linux-gnu-"} 1843: ${cross_prefix_s390x="s390x-linux-gnu-"} 1844: ${cross_prefix_sh4="sh4-linux-gnu-"} 1845: ${cross_prefix_sparc64="sparc64-linux-gnu-"} 1846: ${cross_prefix_sparc="$cross_prefix_sparc64"} 1847: ${cross_prefix_x86_64="x86_64-linux-gnu-"} 1848 1849: ${cross_cc_aarch64_be="$cross_cc_aarch64"} 1850: ${cross_cc_cflags_aarch64_be="-mbig-endian"} 1851: ${cross_cc_armeb="$cross_cc_arm"} 1852: ${cross_cc_cflags_armeb="-mbig-endian"} 1853: ${cross_cc_hexagon="hexagon-unknown-linux-musl-clang"} 1854: ${cross_cc_cflags_hexagon="-mv67 -O2 -static"} 1855: ${cross_cc_cflags_i386="-m32"} 1856: ${cross_cc_cflags_ppc="-m32 -mbig-endian"} 1857: ${cross_cc_cflags_ppc64="-m64 -mbig-endian"} 1858: ${cross_cc_ppc64le="$cross_cc_ppc64"} 1859: ${cross_cc_cflags_ppc64le="-m64 -mlittle-endian"} 1860: ${cross_cc_cflags_sparc64="-m64 -mcpu=ultrasparc"} 1861: ${cross_cc_sparc="$cross_cc_sparc64"} 1862: ${cross_cc_cflags_sparc="-m32 -mcpu=supersparc"} 1863: ${cross_cc_cflags_x86_64="-m64"} 1864 1865compute_target_variable() { 1866 eval "$2=" 1867 if eval test -n "\"\${cross_prefix_$1}\""; then 1868 if eval has "\"\${cross_prefix_$1}\$3\""; then 1869 eval "$2=\"\${cross_prefix_$1}\$3\"" 1870 fi 1871 fi 1872} 1873 1874have_target() { 1875 for i; do 1876 case " $target_list " in 1877 *" $i "*) return 0;; 1878 *) ;; 1879 esac 1880 done 1881 return 1 1882} 1883 1884# probe_target_compiler TARGET 1885# 1886# Look for a compiler for the given target, either native or cross. 1887# Set variables target_* if a compiler is found, and container_cross_* 1888# if a Docker-based cross-compiler image is known for the target. 1889# Set got_cross_cc to yes/no depending on whether a non-container-based 1890# compiler was found. 1891# 1892# If TARGET is a user-mode emulation target, also set build_static to 1893# "y" if static linking is possible. 1894# 1895probe_target_compiler() { 1896 # reset all output variables 1897 got_cross_cc=no 1898 container_image= 1899 container_hosts= 1900 container_cross_cc= 1901 container_cross_ar= 1902 container_cross_as= 1903 container_cross_ld= 1904 container_cross_nm= 1905 container_cross_objcopy= 1906 container_cross_ranlib= 1907 container_cross_strip= 1908 1909 # We shall skip configuring the target compiler if the user didn't 1910 # bother enabling an appropriate guest. This avoids building 1911 # extraneous firmware images and tests. 1912 if test "${target_list#*$1}" = "$1"; then 1913 return 1 1914 fi 1915 1916 target_arch=${1%%-*} 1917 case $target_arch in 1918 aarch64) container_hosts="x86_64 aarch64" ;; 1919 alpha) container_hosts=x86_64 ;; 1920 arm) container_hosts="x86_64 aarch64" ;; 1921 cris) container_hosts=x86_64 ;; 1922 hexagon) container_hosts=x86_64 ;; 1923 hppa) container_hosts=x86_64 ;; 1924 i386) container_hosts=x86_64 ;; 1925 loongarch64) container_hosts=x86_64 ;; 1926 m68k) container_hosts=x86_64 ;; 1927 microblaze) container_hosts=x86_64 ;; 1928 mips64el) container_hosts=x86_64 ;; 1929 mips64) container_hosts=x86_64 ;; 1930 mipsel) container_hosts=x86_64 ;; 1931 mips) container_hosts=x86_64 ;; 1932 nios2) container_hosts=x86_64 ;; 1933 ppc) container_hosts=x86_64 ;; 1934 ppc64|ppc64le) container_hosts=x86_64 ;; 1935 riscv64) container_hosts=x86_64 ;; 1936 s390x) container_hosts=x86_64 ;; 1937 sh4) container_hosts=x86_64 ;; 1938 sparc64) container_hosts=x86_64 ;; 1939 tricore) container_hosts=x86_64 ;; 1940 x86_64) container_hosts="aarch64 ppc64el x86_64" ;; 1941 xtensa*) container_hosts=x86_64 ;; 1942 esac 1943 1944 for host in $container_hosts; do 1945 test "$container" != no || continue 1946 test "$host" = "$cpu" || continue 1947 case $target_arch in 1948 aarch64) 1949 # We don't have any bigendian build tools so we only use this for AArch64 1950 container_image=debian-arm64-cross 1951 container_cross_prefix=aarch64-linux-gnu- 1952 container_cross_cc=${container_cross_prefix}gcc-10 1953 ;; 1954 alpha) 1955 container_image=debian-alpha-cross 1956 container_cross_prefix=alpha-linux-gnu- 1957 ;; 1958 arm) 1959 # We don't have any bigendian build tools so we only use this for ARM 1960 container_image=debian-armhf-cross 1961 container_cross_prefix=arm-linux-gnueabihf- 1962 ;; 1963 cris) 1964 container_image=fedora-cris-cross 1965 container_cross_prefix=cris-linux-gnu- 1966 ;; 1967 hexagon) 1968 container_image=debian-hexagon-cross 1969 container_cross_prefix=hexagon-unknown-linux-musl- 1970 container_cross_cc=${container_cross_prefix}clang 1971 ;; 1972 hppa) 1973 container_image=debian-hppa-cross 1974 container_cross_prefix=hppa-linux-gnu- 1975 ;; 1976 i386) 1977 container_image=fedora-i386-cross 1978 container_cross_prefix= 1979 ;; 1980 loongarch64) 1981 container_image=debian-loongarch-cross 1982 container_cross_prefix=loongarch64-unknown-linux-gnu- 1983 ;; 1984 m68k) 1985 container_image=debian-m68k-cross 1986 container_cross_prefix=m68k-linux-gnu- 1987 ;; 1988 microblaze) 1989 container_image=debian-microblaze-cross 1990 container_cross_prefix=microblaze-linux-musl- 1991 ;; 1992 mips64el) 1993 container_image=debian-mips64el-cross 1994 container_cross_prefix=mips64el-linux-gnuabi64- 1995 ;; 1996 mips64) 1997 container_image=debian-mips64-cross 1998 container_cross_prefix=mips64-linux-gnuabi64- 1999 ;; 2000 mipsel) 2001 container_image=debian-mipsel-cross 2002 container_cross_prefix=mipsel-linux-gnu- 2003 ;; 2004 mips) 2005 container_image=debian-mips-cross 2006 container_cross_prefix=mips-linux-gnu- 2007 ;; 2008 nios2) 2009 container_image=debian-nios2-cross 2010 container_cross_prefix=nios2-linux-gnu- 2011 ;; 2012 ppc) 2013 container_image=debian-powerpc-test-cross 2014 container_cross_prefix=powerpc-linux-gnu- 2015 container_cross_cc=${container_cross_prefix}gcc-10 2016 ;; 2017 ppc64|ppc64le) 2018 container_image=debian-powerpc-test-cross 2019 container_cross_prefix=powerpc${target_arch#ppc}-linux-gnu- 2020 container_cross_cc=${container_cross_prefix}gcc-10 2021 ;; 2022 riscv64) 2023 container_image=debian-riscv64-test-cross 2024 container_cross_prefix=riscv64-linux-gnu- 2025 ;; 2026 s390x) 2027 container_image=debian-s390x-cross 2028 container_cross_prefix=s390x-linux-gnu- 2029 ;; 2030 sh4) 2031 container_image=debian-sh4-cross 2032 container_cross_prefix=sh4-linux-gnu- 2033 ;; 2034 sparc64) 2035 container_image=debian-sparc64-cross 2036 container_cross_prefix=sparc64-linux-gnu- 2037 ;; 2038 tricore) 2039 container_image=debian-tricore-cross 2040 container_cross_prefix=tricore- 2041 container_cross_as=tricore-as 2042 container_cross_ld=tricore-ld 2043 break 2044 ;; 2045 x86_64) 2046 container_image=debian-amd64-cross 2047 container_cross_prefix=x86_64-linux-gnu- 2048 ;; 2049 xtensa*) 2050 container_hosts=x86_64 2051 container_image=debian-xtensa-cross 2052 2053 # default to the dc232b cpu 2054 container_cross_prefix=/opt/2020.07/xtensa-dc232b-elf/bin/xtensa-dc232b-elf- 2055 ;; 2056 esac 2057 : ${container_cross_cc:=${container_cross_prefix}gcc} 2058 : ${container_cross_ar:=${container_cross_prefix}ar} 2059 : ${container_cross_as:=${container_cross_prefix}as} 2060 : ${container_cross_ld:=${container_cross_prefix}ld} 2061 : ${container_cross_nm:=${container_cross_prefix}nm} 2062 : ${container_cross_objcopy:=${container_cross_prefix}objcopy} 2063 : ${container_cross_ranlib:=${container_cross_prefix}ranlib} 2064 : ${container_cross_strip:=${container_cross_prefix}strip} 2065 done 2066 2067 try=cross 2068 case "$target_arch:$cpu" in 2069 aarch64_be:aarch64 | \ 2070 armeb:arm | \ 2071 i386:x86_64 | \ 2072 mips*:mips64 | \ 2073 ppc*:ppc64 | \ 2074 sparc:sparc64 | \ 2075 "$cpu:$cpu") 2076 try='native cross' ;; 2077 esac 2078 eval "target_cflags=\${cross_cc_cflags_$target_arch}" 2079 for thistry in $try; do 2080 case $thistry in 2081 native) 2082 target_cc=$cc 2083 target_ccas=$ccas 2084 target_ar=$ar 2085 target_as=$as 2086 target_ld=$ld 2087 target_nm=$nm 2088 target_objcopy=$objcopy 2089 target_ranlib=$ranlib 2090 target_strip=$strip 2091 ;; 2092 cross) 2093 target_cc= 2094 if eval test -n "\"\${cross_cc_$target_arch}\""; then 2095 if eval has "\"\${cross_cc_$target_arch}\""; then 2096 eval "target_cc=\"\${cross_cc_$target_arch}\"" 2097 fi 2098 else 2099 compute_target_variable $target_arch target_cc gcc 2100 fi 2101 target_ccas=$target_cc 2102 compute_target_variable $target_arch target_ar ar 2103 compute_target_variable $target_arch target_as as 2104 compute_target_variable $target_arch target_ld ld 2105 compute_target_variable $target_arch target_nm nm 2106 compute_target_variable $target_arch target_objcopy objcopy 2107 compute_target_variable $target_arch target_ranlib ranlib 2108 compute_target_variable $target_arch target_strip strip 2109 ;; 2110 esac 2111 2112 if test -n "$target_cc"; then 2113 case $target_arch in 2114 i386|x86_64) 2115 if $target_cc --version | grep -qi "clang"; then 2116 continue 2117 fi 2118 ;; 2119 esac 2120 elif test -n "$target_as" && test -n "$target_ld"; then 2121 # Special handling for assembler only targets 2122 case $target in 2123 tricore-softmmu) 2124 build_static= 2125 got_cross_cc=yes 2126 break 2127 ;; 2128 *) 2129 continue 2130 ;; 2131 esac 2132 else 2133 continue 2134 fi 2135 2136 write_c_skeleton 2137 case $1 in 2138 *-softmmu) 2139 if do_compiler "$target_cc" $target_cflags -o $TMPO -c $TMPC && 2140 do_compiler "$target_cc" $target_cflags -r -nostdlib -o "${TMPDIR1}/${TMPB}2.o" "$TMPO" -lgcc; then 2141 got_cross_cc=yes 2142 break 2143 fi 2144 ;; 2145 *) 2146 if do_compiler "$target_cc" $target_cflags -o $TMPE $TMPC -static ; then 2147 build_static=y 2148 got_cross_cc=yes 2149 break 2150 fi 2151 if do_compiler "$target_cc" $target_cflags -o $TMPE $TMPC ; then 2152 build_static= 2153 got_cross_cc=yes 2154 break 2155 fi 2156 ;; 2157 esac 2158 done 2159 if test $got_cross_cc != yes; then 2160 build_static= 2161 target_cc= 2162 target_ccas= 2163 target_ar= 2164 target_as= 2165 target_ld= 2166 target_nm= 2167 target_objcopy= 2168 target_ranlib= 2169 target_strip= 2170 fi 2171 test -n "$target_cc" 2172} 2173 2174write_target_makefile() { 2175 echo "EXTRA_CFLAGS=$target_cflags" 2176 if test -z "$target_cc" && test -z "$target_as"; then 2177 test -z "$container_image" && error_exit "Internal error: could not find cross compiler for $1?" 2178 echo "$1: docker-image-$container_image" >> Makefile.prereqs 2179 if test -n "$container_cross_cc"; then 2180 echo "CC=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" 2181 echo "CCAS=$docker_py cc --cc $container_cross_cc -i qemu/$container_image -s $source_path --" 2182 fi 2183 echo "AR=$docker_py cc --cc $container_cross_ar -i qemu/$container_image -s $source_path --" 2184 echo "AS=$docker_py cc --cc $container_cross_as -i qemu/$container_image -s $source_path --" 2185 echo "LD=$docker_py cc --cc $container_cross_ld -i qemu/$container_image -s $source_path --" 2186 echo "NM=$docker_py cc --cc $container_cross_nm -i qemu/$container_image -s $source_path --" 2187 echo "OBJCOPY=$docker_py cc --cc $container_cross_objcopy -i qemu/$container_image -s $source_path --" 2188 echo "RANLIB=$docker_py cc --cc $container_cross_ranlib -i qemu/$container_image -s $source_path --" 2189 echo "STRIP=$docker_py cc --cc $container_cross_strip -i qemu/$container_image -s $source_path --" 2190 else 2191 if test -n "$target_cc"; then 2192 echo "CC=$target_cc" 2193 echo "CCAS=$target_ccas" 2194 fi 2195 if test -n "$target_ar"; then 2196 echo "AR=$target_ar" 2197 fi 2198 if test -n "$target_as"; then 2199 echo "AS=$target_as" 2200 fi 2201 if test -n "$target_ld"; then 2202 echo "LD=$target_ld" 2203 fi 2204 if test -n "$target_nm"; then 2205 echo "NM=$target_nm" 2206 fi 2207 if test -n "$target_objcopy"; then 2208 echo "OBJCOPY=$target_objcopy" 2209 fi 2210 if test -n "$target_ranlib"; then 2211 echo "RANLIB=$target_ranlib" 2212 fi 2213 if test -n "$target_strip"; then 2214 echo "STRIP=$target_strip" 2215 fi 2216 fi 2217} 2218 2219########################################## 2220# check for vfio_user_server 2221 2222case "$vfio_user_server" in 2223 enabled ) 2224 if test "$git_submodules_action" != "ignore"; then 2225 git_submodules="${git_submodules} subprojects/libvfio-user" 2226 fi 2227 ;; 2228esac 2229 2230########################################## 2231# End of CC checks 2232# After here, no more $cc or $ld runs 2233 2234write_c_skeleton 2235 2236if test "$fortify_source" = "yes" ; then 2237 QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS" 2238fi 2239 2240if test "$have_asan" = "yes"; then 2241 QEMU_CFLAGS="-fsanitize=address $QEMU_CFLAGS" 2242 QEMU_LDFLAGS="-fsanitize=address $QEMU_LDFLAGS" 2243 if test "$have_asan_iface_h" = "no" ; then 2244 echo "ASAN build enabled, but ASAN header missing." \ 2245 "Without code annotation, the report may be inferior." 2246 elif test "$have_asan_iface_fiber" = "no" ; then 2247 echo "ASAN build enabled, but ASAN header is too old." \ 2248 "Without code annotation, the report may be inferior." 2249 fi 2250fi 2251if test "$have_tsan" = "yes" ; then 2252 if test "$have_tsan_iface_fiber" = "yes" ; then 2253 QEMU_CFLAGS="-fsanitize=thread $QEMU_CFLAGS" 2254 QEMU_LDFLAGS="-fsanitize=thread $QEMU_LDFLAGS" 2255 else 2256 error_exit "Cannot enable TSAN due to missing fiber annotation interface." 2257 fi 2258elif test "$tsan" = "yes" ; then 2259 error_exit "Cannot enable TSAN due to missing sanitize thread interface." 2260fi 2261if test "$have_ubsan" = "yes"; then 2262 QEMU_CFLAGS="-fsanitize=undefined $QEMU_CFLAGS" 2263 QEMU_LDFLAGS="-fsanitize=undefined $QEMU_LDFLAGS" 2264fi 2265 2266####################################### 2267# cross-compiled firmware targets 2268 2269# Set up build tree symlinks that point back into the source tree 2270# (these can be both files and directories). 2271# Caution: avoid adding files or directories here using wildcards. This 2272# will result in problems later if a new file matching the wildcard is 2273# added to the source tree -- nothing will cause configure to be rerun 2274# so the build tree will be missing the link back to the new file, and 2275# tests might fail. Prefer to keep the relevant files in their own 2276# directory and symlink the directory instead. 2277LINKS="Makefile" 2278LINKS="$LINKS docs/config" 2279LINKS="$LINKS pc-bios/optionrom/Makefile" 2280LINKS="$LINKS pc-bios/s390-ccw/Makefile" 2281LINKS="$LINKS pc-bios/vof/Makefile" 2282LINKS="$LINKS .gdbinit scripts" # scripts needed by relative path in .gdbinit 2283LINKS="$LINKS tests/avocado tests/data" 2284LINKS="$LINKS tests/qemu-iotests/check" 2285LINKS="$LINKS python" 2286LINKS="$LINKS contrib/plugins/Makefile " 2287for f in $LINKS ; do 2288 if [ -e "$source_path/$f" ]; then 2289 mkdir -p "$(dirname ./"$f")" 2290 symlink "$source_path/$f" "$f" 2291 fi 2292done 2293 2294echo "# Automatically generated by configure - do not modify" > Makefile.prereqs 2295 2296# Mac OS X ships with a broken assembler 2297roms= 2298if have_target i386-softmmu x86_64-softmmu && \ 2299 test "$targetos" != "darwin" && test "$targetos" != "sunos" && \ 2300 test "$targetos" != "haiku" && \ 2301 probe_target_compiler i386-softmmu; then 2302 roms="pc-bios/optionrom" 2303 config_mak=pc-bios/optionrom/config.mak 2304 echo "# Automatically generated by configure - do not modify" > $config_mak 2305 echo "TOPSRC_DIR=$source_path" >> $config_mak 2306 write_target_makefile >> $config_mak 2307fi 2308 2309if have_target ppc-softmmu ppc64-softmmu && \ 2310 probe_target_compiler ppc-softmmu; then 2311 roms="$roms pc-bios/vof" 2312 config_mak=pc-bios/vof/config.mak 2313 echo "# Automatically generated by configure - do not modify" > $config_mak 2314 echo "SRC_DIR=$source_path/pc-bios/vof" >> $config_mak 2315 write_target_makefile >> $config_mak 2316fi 2317 2318# Only build s390-ccw bios if the compiler has -march=z900 or -march=z10 2319# (which is the lowest architecture level that Clang supports) 2320if have_target s390x-softmmu && probe_target_compiler s390x-softmmu; then 2321 write_c_skeleton 2322 do_compiler "$target_cc" $target_cc_cflags -march=z900 -o $TMPO -c $TMPC 2323 has_z900=$? 2324 if [ $has_z900 = 0 ] || do_compiler "$target_cc" $target_cc_cflags -march=z10 -msoft-float -Werror -o $TMPO -c $TMPC; then 2325 if [ $has_z900 != 0 ]; then 2326 echo "WARNING: Your compiler does not support the z900!" 2327 echo " The s390-ccw bios will only work with guest CPUs >= z10." 2328 fi 2329 roms="$roms pc-bios/s390-ccw" 2330 config_mak=pc-bios/s390-ccw/config-host.mak 2331 echo "# Automatically generated by configure - do not modify" > $config_mak 2332 echo "SRC_PATH=$source_path/pc-bios/s390-ccw" >> $config_mak 2333 write_target_makefile >> $config_mak 2334 # SLOF is required for building the s390-ccw firmware on s390x, 2335 # since it is using the libnet code from SLOF for network booting. 2336 git_submodules="${git_submodules} roms/SLOF" 2337 fi 2338fi 2339 2340####################################### 2341# generate config-host.mak 2342 2343if ! (GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then 2344 exit 1 2345fi 2346 2347config_host_mak="config-host.mak" 2348 2349echo "# Automatically generated by configure - do not modify" > $config_host_mak 2350echo >> $config_host_mak 2351 2352echo all: >> $config_host_mak 2353echo "GIT=$git" >> $config_host_mak 2354echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak 2355echo "GIT_SUBMODULES_ACTION=$git_submodules_action" >> $config_host_mak 2356 2357if test "$debug_tcg" = "yes" ; then 2358 echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak 2359fi 2360if test "$mingw32" = "yes" ; then 2361 echo "CONFIG_WIN32=y" >> $config_host_mak 2362 echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER-QEMU}" >> $config_host_mak 2363 echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO-Linux}" >> $config_host_mak 2364 echo "QEMU_GA_VERSION=${QEMU_GA_VERSION-$(cat "$source_path"/VERSION)}" >> $config_host_mak 2365else 2366 echo "CONFIG_POSIX=y" >> $config_host_mak 2367fi 2368 2369if test "$linux" = "yes" ; then 2370 echo "CONFIG_LINUX=y" >> $config_host_mak 2371fi 2372 2373if test "$darwin" = "yes" ; then 2374 echo "CONFIG_DARWIN=y" >> $config_host_mak 2375fi 2376 2377if test "$solaris" = "yes" ; then 2378 echo "CONFIG_SOLARIS=y" >> $config_host_mak 2379fi 2380if test "$static" = "yes" ; then 2381 echo "CONFIG_STATIC=y" >> $config_host_mak 2382fi 2383echo "SRC_PATH=$source_path" >> $config_host_mak 2384echo "TARGET_DIRS=$target_list" >> $config_host_mak 2385if test "$modules" = "yes"; then 2386 echo "CONFIG_MODULES=y" >> $config_host_mak 2387fi 2388 2389# XXX: suppress that 2390if [ "$bsd" = "yes" ] ; then 2391 echo "CONFIG_BSD=y" >> $config_host_mak 2392fi 2393 2394echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak 2395 2396if test "$have_asan_iface_fiber" = "yes" ; then 2397 echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak 2398fi 2399 2400if test "$have_tsan" = "yes" && test "$have_tsan_iface_fiber" = "yes" ; then 2401 echo "CONFIG_TSAN=y" >> $config_host_mak 2402fi 2403 2404if test "$plugins" = "yes" ; then 2405 echo "CONFIG_PLUGIN=y" >> $config_host_mak 2406fi 2407 2408if test -n "$gdb_bin"; then 2409 gdb_version=$($gdb_bin --version | head -n 1) 2410 if version_ge ${gdb_version##* } 9.1; then 2411 echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak 2412 gdb_arches=$("$source_path/scripts/probe-gdb-support.py" $gdb_bin) 2413 else 2414 gdb_bin="" 2415 fi 2416fi 2417 2418if test "$container" != no; then 2419 echo "ENGINE=$container" >> $config_host_mak 2420 echo "RUNC=$runc" >> $config_host_mak 2421fi 2422echo "ROMS=$roms" >> $config_host_mak 2423echo "MAKE=$make" >> $config_host_mak 2424echo "PYTHON=$python" >> $config_host_mak 2425echo "GENISOIMAGE=$genisoimage" >> $config_host_mak 2426echo "MESON=$meson" >> $config_host_mak 2427echo "NINJA=$ninja" >> $config_host_mak 2428echo "CC=$cc" >> $config_host_mak 2429echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak 2430echo "QEMU_OBJCFLAGS=$QEMU_OBJCFLAGS" >> $config_host_mak 2431echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak 2432echo "GLIB_LIBS=$glib_libs" >> $config_host_mak 2433echo "GLIB_BINDIR=$glib_bindir" >> $config_host_mak 2434echo "GLIB_VERSION=$($pkg_config --modversion glib-2.0)" >> $config_host_mak 2435if test "$glib_has_gslice" = "yes" ; then 2436 echo "HAVE_GLIB_WITH_SLICE_ALLOCATOR=y" >> $config_host_mak 2437fi 2438echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak 2439echo "EXESUF=$EXESUF" >> $config_host_mak 2440 2441# use included Linux headers 2442if test "$linux" = "yes" ; then 2443 mkdir -p linux-headers 2444 case "$cpu" in 2445 i386|x86_64) 2446 linux_arch=x86 2447 ;; 2448 ppc|ppc64) 2449 linux_arch=powerpc 2450 ;; 2451 s390x) 2452 linux_arch=s390 2453 ;; 2454 aarch64) 2455 linux_arch=arm64 2456 ;; 2457 loongarch*) 2458 linux_arch=loongarch 2459 ;; 2460 mips64) 2461 linux_arch=mips 2462 ;; 2463 *) 2464 # For most CPUs the kernel architecture name and QEMU CPU name match. 2465 linux_arch="$cpu" 2466 ;; 2467 esac 2468 # For non-KVM architectures we will not have asm headers 2469 if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then 2470 symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm 2471 fi 2472fi 2473 2474for target in $target_list; do 2475 target_dir="$target" 2476 target_name=$(echo $target | cut -d '-' -f 1)$EXESUF 2477 mkdir -p "$target_dir" 2478 case $target in 2479 *-user) symlink "../qemu-$target_name" "$target_dir/qemu-$target_name" ;; 2480 *) symlink "../qemu-system-$target_name" "$target_dir/qemu-system-$target_name" ;; 2481 esac 2482done 2483 2484if test "$default_targets" = "yes"; then 2485 echo "CONFIG_DEFAULT_TARGETS=y" >> $config_host_mak 2486fi 2487 2488if test "$ccache_cpp2" = "yes"; then 2489 echo "export CCACHE_CPP2=y" >> $config_host_mak 2490fi 2491 2492if test "$safe_stack" = "yes"; then 2493 echo "CONFIG_SAFESTACK=y" >> $config_host_mak 2494fi 2495 2496# tests/tcg configuration 2497(config_host_mak=tests/tcg/config-host.mak 2498mkdir -p tests/tcg 2499echo "# Automatically generated by configure - do not modify" > $config_host_mak 2500echo "SRC_PATH=$source_path" >> $config_host_mak 2501echo "HOST_CC=$host_cc" >> $config_host_mak 2502 2503# versioned checked in the main config_host.mak above 2504if test -n "$gdb_bin"; then 2505 echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak 2506fi 2507if test "$plugins" = "yes" ; then 2508 echo "CONFIG_PLUGIN=y" >> $config_host_mak 2509fi 2510 2511tcg_tests_targets= 2512for target in $target_list; do 2513 arch=${target%%-*} 2514 2515 case $target in 2516 xtensa*-linux-user) 2517 # the toolchain is not complete with headers, only build softmmu tests 2518 continue 2519 ;; 2520 *-softmmu) 2521 test -f "$source_path/tests/tcg/$arch/Makefile.softmmu-target" || continue 2522 qemu="qemu-system-$arch" 2523 ;; 2524 *-linux-user|*-bsd-user) 2525 qemu="qemu-$arch" 2526 ;; 2527 esac 2528 2529 if probe_target_compiler $target || test -n "$container_image"; then 2530 test -n "$container_image" && build_static=y 2531 mkdir -p "tests/tcg/$target" 2532 config_target_mak=tests/tcg/$target/config-target.mak 2533 ln -sf "$source_path/tests/tcg/Makefile.target" "tests/tcg/$target/Makefile" 2534 echo "# Automatically generated by configure - do not modify" > "$config_target_mak" 2535 echo "TARGET_NAME=$arch" >> "$config_target_mak" 2536 echo "TARGET=$target" >> "$config_target_mak" 2537 write_target_makefile "build-tcg-tests-$target" >> "$config_target_mak" 2538 echo "BUILD_STATIC=$build_static" >> "$config_target_mak" 2539 echo "QEMU=$PWD/$qemu" >> "$config_target_mak" 2540 2541 # will GDB work with these binaries? 2542 if test "${gdb_arches#*$arch}" != "$gdb_arches"; then 2543 echo "HOST_GDB_SUPPORTS_ARCH=y" >> "$config_target_mak" 2544 fi 2545 2546 echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> Makefile.prereqs 2547 tcg_tests_targets="$tcg_tests_targets $target" 2548 fi 2549done 2550 2551if test "$tcg" = "enabled"; then 2552 echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> config-host.mak 2553fi 2554) 2555 2556if test "$skip_meson" = no; then 2557 cross="config-meson.cross.new" 2558 meson_quote() { 2559 test $# = 0 && return 2560 echo "'$(echo $* | sed "s/ /','/g")'" 2561 } 2562 2563 echo "# Automatically generated by configure - do not modify" > $cross 2564 echo "[properties]" >> $cross 2565 2566 # unroll any custom device configs 2567 for a in $device_archs; do 2568 eval "c=\$devices_${a}" 2569 echo "${a}-softmmu = '$c'" >> $cross 2570 done 2571 2572 echo "[built-in options]" >> $cross 2573 echo "c_args = [$(meson_quote $CFLAGS $EXTRA_CFLAGS)]" >> $cross 2574 echo "cpp_args = [$(meson_quote $CXXFLAGS $EXTRA_CXXFLAGS)]" >> $cross 2575 test -n "$objcc" && echo "objc_args = [$(meson_quote $OBJCFLAGS $EXTRA_OBJCFLAGS)]" >> $cross 2576 echo "c_link_args = [$(meson_quote $CFLAGS $LDFLAGS $EXTRA_CFLAGS $EXTRA_LDFLAGS)]" >> $cross 2577 echo "cpp_link_args = [$(meson_quote $CXXFLAGS $LDFLAGS $EXTRA_CXXFLAGS $EXTRA_LDFLAGS)]" >> $cross 2578 echo "[binaries]" >> $cross 2579 echo "c = [$(meson_quote $cc $CPU_CFLAGS)]" >> $cross 2580 test -n "$cxx" && echo "cpp = [$(meson_quote $cxx $CPU_CFLAGS)]" >> $cross 2581 test -n "$objcc" && echo "objc = [$(meson_quote $objcc $CPU_CFLAGS)]" >> $cross 2582 echo "ar = [$(meson_quote $ar)]" >> $cross 2583 echo "nm = [$(meson_quote $nm)]" >> $cross 2584 echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross 2585 echo "ranlib = [$(meson_quote $ranlib)]" >> $cross 2586 if has $sdl2_config; then 2587 echo "sdl2-config = [$(meson_quote $sdl2_config)]" >> $cross 2588 fi 2589 echo "strip = [$(meson_quote $strip)]" >> $cross 2590 echo "widl = [$(meson_quote $widl)]" >> $cross 2591 echo "windres = [$(meson_quote $windres)]" >> $cross 2592 echo "windmc = [$(meson_quote $windmc)]" >> $cross 2593 if test "$cross_compile" = "yes"; then 2594 cross_arg="--cross-file config-meson.cross" 2595 echo "[host_machine]" >> $cross 2596 echo "system = '$targetos'" >> $cross 2597 case "$cpu" in 2598 i386) 2599 echo "cpu_family = 'x86'" >> $cross 2600 ;; 2601 *) 2602 echo "cpu_family = '$cpu'" >> $cross 2603 ;; 2604 esac 2605 echo "cpu = '$cpu'" >> $cross 2606 if test "$bigendian" = "yes" ; then 2607 echo "endian = 'big'" >> $cross 2608 else 2609 echo "endian = 'little'" >> $cross 2610 fi 2611 else 2612 cross_arg="--native-file config-meson.cross" 2613 fi 2614 mv $cross config-meson.cross 2615 2616 rm -rf meson-private meson-info meson-logs 2617 2618 # Built-in options 2619 test "$bindir" != "bin" && meson_option_add "-Dbindir=$bindir" 2620 test "$default_feature" = no && meson_option_add -Dauto_features=disabled 2621 test "$pie" = no && meson_option_add -Db_pie=false 2622 test "$werror" = yes && meson_option_add -Dwerror=true 2623 2624 # QEMU options 2625 test "$cfi" != false && meson_option_add "-Dcfi=$cfi" 2626 test "$fdt" != auto && meson_option_add "-Dfdt=$fdt" 2627 test -n "${LIB_FUZZING_ENGINE+xxx}" && meson_option_add "-Dfuzzing_engine=$LIB_FUZZING_ENGINE" 2628 test "$qemu_suffix" != qemu && meson_option_add "-Dqemu_suffix=$qemu_suffix" 2629 test "$smbd" != '' && meson_option_add "-Dsmbd=$smbd" 2630 test "$tcg" != enabled && meson_option_add "-Dtcg=$tcg" 2631 test "$vfio_user_server" != auto && meson_option_add "-Dvfio_user_server=$vfio_user_server" 2632 run_meson() { 2633 NINJA=$ninja $meson setup --prefix "$prefix" "$@" $cross_arg "$PWD" "$source_path" 2634 } 2635 eval run_meson $meson_options 2636 if test "$?" -ne 0 ; then 2637 error_exit "meson setup failed" 2638 fi 2639fi 2640 2641# Save the configure command line for later reuse. 2642cat <<EOD >config.status 2643#!/bin/sh 2644# Generated by configure. 2645# Run this file to recreate the current configuration. 2646# Compiler output produced by configure, useful for debugging 2647# configure, is in config.log if it exists. 2648EOD 2649 2650preserve_env() { 2651 envname=$1 2652 2653 eval envval=\$$envname 2654 2655 if test -n "$envval" 2656 then 2657 echo "$envname='$envval'" >> config.status 2658 echo "export $envname" >> config.status 2659 else 2660 echo "unset $envname" >> config.status 2661 fi 2662} 2663 2664# Preserve various env variables that influence what 2665# features/build target configure will detect 2666preserve_env AR 2667preserve_env AS 2668preserve_env CC 2669preserve_env CFLAGS 2670preserve_env CXX 2671preserve_env CXXFLAGS 2672preserve_env LD 2673preserve_env LDFLAGS 2674preserve_env LD_LIBRARY_PATH 2675preserve_env MAKE 2676preserve_env NM 2677preserve_env OBJCFLAGS 2678preserve_env OBJCOPY 2679preserve_env PATH 2680preserve_env PKG_CONFIG 2681preserve_env PKG_CONFIG_LIBDIR 2682preserve_env PKG_CONFIG_PATH 2683preserve_env PYTHON 2684preserve_env QEMU_GA_MANUFACTURER 2685preserve_env QEMU_GA_DISTRO 2686preserve_env QEMU_GA_VERSION 2687preserve_env SDL2_CONFIG 2688preserve_env SMBD 2689preserve_env STRIP 2690preserve_env WIDL 2691preserve_env WINDRES 2692preserve_env WINDMC 2693 2694printf "exec" >>config.status 2695for i in "$0" "$@"; do 2696 test "$i" = --skip-meson || printf " %s" "$(quote_sh "$i")" >>config.status 2697done 2698echo ' "$@"' >>config.status 2699chmod +x config.status 2700 2701rm -r "$TMPDIR1" 2702