1B-L475E-IOT01A IoT Node (``b-l475e-iot01a``) 2============================================ 3 4The B-L475E-IOT01A IoT Node uses the STM32L475VG SoC which is based on 5ARM Cortex-M4F core. It is part of STMicroelectronics 6:doc:`STM32 boards </system/arm/stm32>` and more specifically the STM32L4 7ultra-low power series. The STM32L4x5 chip runs at up to 80 MHz and 8integrates 128 KiB of SRAM and up to 1MiB of Flash. The B-L475E-IOT01A board 9namely features 64 Mibit QSPI Flash, BT, WiFi and RF connectivity, 10USART, I2C, SPI, CAN and USB OTG, as well as a variety of sensors. 11 12Supported devices 13""""""""""""""""" 14 15Currently, B-L475E-IOT01A machine's implementation is minimal, 16it only supports the following device: 17 18- Cortex-M4F based STM32L4x5 SoC 19 20Missing devices 21""""""""""""""" 22 23The B-L475E-IOT01A does *not* support the following devices: 24 25- Extended interrupts and events controller (EXTI) 26- Reset and clock control (RCC) 27- Serial ports (UART) 28- System configuration controller (SYSCFG) 29- General-purpose I/Os (GPIO) 30- Analog to Digital Converter (ADC) 31- SPI controller 32- Timer controller (TIMER) 33 34See the complete list of unimplemented peripheral devices 35in the STM32L4x5 module : ``./hw/arm/stm32l4x5_soc.c`` 36 37Boot options 38"""""""""""" 39 40The B-L475E-IOT01A machine can be started using the ``-kernel`` 41option to load a firmware. Example: 42 43.. code-block:: bash 44 45 $ qemu-system-arm -M b-l475e-iot01a -kernel firmware.bin 46 47