1 /* 2 * ARM Versatile Platform/Application Baseboard System emulation. 3 * 4 * Copyright (c) 2005-2007 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/sysbus.h" 12 #include "hw/arm/arm.h" 13 #include "hw/devices.h" 14 #include "net/net.h" 15 #include "sysemu/sysemu.h" 16 #include "hw/pci/pci.h" 17 #include "hw/i2c/i2c.h" 18 #include "hw/boards.h" 19 #include "sysemu/block-backend.h" 20 #include "exec/address-spaces.h" 21 #include "hw/block/flash.h" 22 #include "qemu/error-report.h" 23 24 #define VERSATILE_FLASH_ADDR 0x34000000 25 #define VERSATILE_FLASH_SIZE (64 * 1024 * 1024) 26 #define VERSATILE_FLASH_SECT_SIZE (256 * 1024) 27 28 /* Primary interrupt controller. */ 29 30 #define TYPE_VERSATILE_PB_SIC "versatilepb_sic" 31 #define VERSATILE_PB_SIC(obj) \ 32 OBJECT_CHECK(vpb_sic_state, (obj), TYPE_VERSATILE_PB_SIC) 33 34 typedef struct vpb_sic_state { 35 SysBusDevice parent_obj; 36 37 MemoryRegion iomem; 38 uint32_t level; 39 uint32_t mask; 40 uint32_t pic_enable; 41 qemu_irq parent[32]; 42 int irq; 43 } vpb_sic_state; 44 45 static const VMStateDescription vmstate_vpb_sic = { 46 .name = "versatilepb_sic", 47 .version_id = 1, 48 .minimum_version_id = 1, 49 .fields = (VMStateField[]) { 50 VMSTATE_UINT32(level, vpb_sic_state), 51 VMSTATE_UINT32(mask, vpb_sic_state), 52 VMSTATE_UINT32(pic_enable, vpb_sic_state), 53 VMSTATE_END_OF_LIST() 54 } 55 }; 56 57 static void vpb_sic_update(vpb_sic_state *s) 58 { 59 uint32_t flags; 60 61 flags = s->level & s->mask; 62 qemu_set_irq(s->parent[s->irq], flags != 0); 63 } 64 65 static void vpb_sic_update_pic(vpb_sic_state *s) 66 { 67 int i; 68 uint32_t mask; 69 70 for (i = 21; i <= 30; i++) { 71 mask = 1u << i; 72 if (!(s->pic_enable & mask)) 73 continue; 74 qemu_set_irq(s->parent[i], (s->level & mask) != 0); 75 } 76 } 77 78 static void vpb_sic_set_irq(void *opaque, int irq, int level) 79 { 80 vpb_sic_state *s = (vpb_sic_state *)opaque; 81 if (level) 82 s->level |= 1u << irq; 83 else 84 s->level &= ~(1u << irq); 85 if (s->pic_enable & (1u << irq)) 86 qemu_set_irq(s->parent[irq], level); 87 vpb_sic_update(s); 88 } 89 90 static uint64_t vpb_sic_read(void *opaque, hwaddr offset, 91 unsigned size) 92 { 93 vpb_sic_state *s = (vpb_sic_state *)opaque; 94 95 switch (offset >> 2) { 96 case 0: /* STATUS */ 97 return s->level & s->mask; 98 case 1: /* RAWSTAT */ 99 return s->level; 100 case 2: /* ENABLE */ 101 return s->mask; 102 case 4: /* SOFTINT */ 103 return s->level & 1; 104 case 8: /* PICENABLE */ 105 return s->pic_enable; 106 default: 107 printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset); 108 return 0; 109 } 110 } 111 112 static void vpb_sic_write(void *opaque, hwaddr offset, 113 uint64_t value, unsigned size) 114 { 115 vpb_sic_state *s = (vpb_sic_state *)opaque; 116 117 switch (offset >> 2) { 118 case 2: /* ENSET */ 119 s->mask |= value; 120 break; 121 case 3: /* ENCLR */ 122 s->mask &= ~value; 123 break; 124 case 4: /* SOFTINTSET */ 125 if (value) 126 s->mask |= 1; 127 break; 128 case 5: /* SOFTINTCLR */ 129 if (value) 130 s->mask &= ~1u; 131 break; 132 case 8: /* PICENSET */ 133 s->pic_enable |= (value & 0x7fe00000); 134 vpb_sic_update_pic(s); 135 break; 136 case 9: /* PICENCLR */ 137 s->pic_enable &= ~value; 138 vpb_sic_update_pic(s); 139 break; 140 default: 141 printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset); 142 return; 143 } 144 vpb_sic_update(s); 145 } 146 147 static const MemoryRegionOps vpb_sic_ops = { 148 .read = vpb_sic_read, 149 .write = vpb_sic_write, 150 .endianness = DEVICE_NATIVE_ENDIAN, 151 }; 152 153 static int vpb_sic_init(SysBusDevice *sbd) 154 { 155 DeviceState *dev = DEVICE(sbd); 156 vpb_sic_state *s = VERSATILE_PB_SIC(dev); 157 int i; 158 159 qdev_init_gpio_in(dev, vpb_sic_set_irq, 32); 160 for (i = 0; i < 32; i++) { 161 sysbus_init_irq(sbd, &s->parent[i]); 162 } 163 s->irq = 31; 164 memory_region_init_io(&s->iomem, OBJECT(s), &vpb_sic_ops, s, 165 "vpb-sic", 0x1000); 166 sysbus_init_mmio(sbd, &s->iomem); 167 return 0; 168 } 169 170 /* Board init. */ 171 172 /* The AB and PB boards both use the same core, just with different 173 peripherals and expansion busses. For now we emulate a subset of the 174 PB peripherals and just change the board ID. */ 175 176 static struct arm_boot_info versatile_binfo; 177 178 static void versatile_init(MachineState *machine, int board_id) 179 { 180 ObjectClass *cpu_oc; 181 Object *cpuobj; 182 ARMCPU *cpu; 183 MemoryRegion *sysmem = get_system_memory(); 184 MemoryRegion *ram = g_new(MemoryRegion, 1); 185 qemu_irq pic[32]; 186 qemu_irq sic[32]; 187 DeviceState *dev, *sysctl; 188 SysBusDevice *busdev; 189 DeviceState *pl041; 190 PCIBus *pci_bus; 191 NICInfo *nd; 192 I2CBus *i2c; 193 int n; 194 int done_smc = 0; 195 DriveInfo *dinfo; 196 197 if (!machine->cpu_model) { 198 machine->cpu_model = "arm926"; 199 } 200 201 cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, machine->cpu_model); 202 if (!cpu_oc) { 203 fprintf(stderr, "Unable to find CPU definition\n"); 204 exit(1); 205 } 206 207 cpuobj = object_new(object_class_get_name(cpu_oc)); 208 209 /* By default ARM1176 CPUs have EL3 enabled. This board does not 210 * currently support EL3 so the CPU EL3 property is disabled before 211 * realization. 212 */ 213 if (object_property_find(cpuobj, "has_el3", NULL)) { 214 object_property_set_bool(cpuobj, false, "has_el3", &error_fatal); 215 } 216 217 object_property_set_bool(cpuobj, true, "realized", &error_fatal); 218 219 cpu = ARM_CPU(cpuobj); 220 221 memory_region_allocate_system_memory(ram, NULL, "versatile.ram", 222 machine->ram_size); 223 /* ??? RAM should repeat to fill physical memory space. */ 224 /* SDRAM at address zero. */ 225 memory_region_add_subregion(sysmem, 0, ram); 226 227 sysctl = qdev_create(NULL, "realview_sysctl"); 228 qdev_prop_set_uint32(sysctl, "sys_id", 0x41007004); 229 qdev_prop_set_uint32(sysctl, "proc_id", 0x02000000); 230 qdev_init_nofail(sysctl); 231 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); 232 233 dev = sysbus_create_varargs("pl190", 0x10140000, 234 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ), 235 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ), 236 NULL); 237 for (n = 0; n < 32; n++) { 238 pic[n] = qdev_get_gpio_in(dev, n); 239 } 240 dev = sysbus_create_simple(TYPE_VERSATILE_PB_SIC, 0x10003000, NULL); 241 for (n = 0; n < 32; n++) { 242 sysbus_connect_irq(SYS_BUS_DEVICE(dev), n, pic[n]); 243 sic[n] = qdev_get_gpio_in(dev, n); 244 } 245 246 sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]); 247 sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]); 248 249 dev = qdev_create(NULL, "versatile_pci"); 250 busdev = SYS_BUS_DEVICE(dev); 251 qdev_init_nofail(dev); 252 sysbus_mmio_map(busdev, 0, 0x10001000); /* PCI controller regs */ 253 sysbus_mmio_map(busdev, 1, 0x41000000); /* PCI self-config */ 254 sysbus_mmio_map(busdev, 2, 0x42000000); /* PCI config */ 255 sysbus_mmio_map(busdev, 3, 0x43000000); /* PCI I/O */ 256 sysbus_mmio_map(busdev, 4, 0x44000000); /* PCI memory window 1 */ 257 sysbus_mmio_map(busdev, 5, 0x50000000); /* PCI memory window 2 */ 258 sysbus_mmio_map(busdev, 6, 0x60000000); /* PCI memory window 3 */ 259 sysbus_connect_irq(busdev, 0, sic[27]); 260 sysbus_connect_irq(busdev, 1, sic[28]); 261 sysbus_connect_irq(busdev, 2, sic[29]); 262 sysbus_connect_irq(busdev, 3, sic[30]); 263 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); 264 265 for(n = 0; n < nb_nics; n++) { 266 nd = &nd_table[n]; 267 268 if (!done_smc && (!nd->model || strcmp(nd->model, "smc91c111") == 0)) { 269 smc91c111_init(nd, 0x10010000, sic[25]); 270 done_smc = 1; 271 } else { 272 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL); 273 } 274 } 275 if (usb_enabled()) { 276 pci_create_simple(pci_bus, -1, "pci-ohci"); 277 } 278 n = drive_get_max_bus(IF_SCSI); 279 while (n >= 0) { 280 pci_create_simple(pci_bus, -1, "lsi53c895a"); 281 n--; 282 } 283 284 sysbus_create_simple("pl011", 0x101f1000, pic[12]); 285 sysbus_create_simple("pl011", 0x101f2000, pic[13]); 286 sysbus_create_simple("pl011", 0x101f3000, pic[14]); 287 sysbus_create_simple("pl011", 0x10009000, sic[6]); 288 289 sysbus_create_simple("pl080", 0x10130000, pic[17]); 290 sysbus_create_simple("sp804", 0x101e2000, pic[4]); 291 sysbus_create_simple("sp804", 0x101e3000, pic[5]); 292 293 sysbus_create_simple("pl061", 0x101e4000, pic[6]); 294 sysbus_create_simple("pl061", 0x101e5000, pic[7]); 295 sysbus_create_simple("pl061", 0x101e6000, pic[8]); 296 sysbus_create_simple("pl061", 0x101e7000, pic[9]); 297 298 /* The versatile/PB actually has a modified Color LCD controller 299 that includes hardware cursor support from the PL111. */ 300 dev = sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]); 301 /* Wire up the mux control signals from the SYS_CLCD register */ 302 qdev_connect_gpio_out(sysctl, 0, qdev_get_gpio_in(dev, 0)); 303 304 sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL); 305 sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL); 306 307 /* Add PL031 Real Time Clock. */ 308 sysbus_create_simple("pl031", 0x101e8000, pic[10]); 309 310 dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL); 311 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 312 i2c_create_slave(i2c, "ds1338", 0x68); 313 314 /* Add PL041 AACI Interface to the LM4549 codec */ 315 pl041 = qdev_create(NULL, "pl041"); 316 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 317 qdev_init_nofail(pl041); 318 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); 319 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, sic[24]); 320 321 /* Memory map for Versatile/PB: */ 322 /* 0x10000000 System registers. */ 323 /* 0x10001000 PCI controller config registers. */ 324 /* 0x10002000 Serial bus interface. */ 325 /* 0x10003000 Secondary interrupt controller. */ 326 /* 0x10004000 AACI (audio). */ 327 /* 0x10005000 MMCI0. */ 328 /* 0x10006000 KMI0 (keyboard). */ 329 /* 0x10007000 KMI1 (mouse). */ 330 /* 0x10008000 Character LCD Interface. */ 331 /* 0x10009000 UART3. */ 332 /* 0x1000a000 Smart card 1. */ 333 /* 0x1000b000 MMCI1. */ 334 /* 0x10010000 Ethernet. */ 335 /* 0x10020000 USB. */ 336 /* 0x10100000 SSMC. */ 337 /* 0x10110000 MPMC. */ 338 /* 0x10120000 CLCD Controller. */ 339 /* 0x10130000 DMA Controller. */ 340 /* 0x10140000 Vectored interrupt controller. */ 341 /* 0x101d0000 AHB Monitor Interface. */ 342 /* 0x101e0000 System Controller. */ 343 /* 0x101e1000 Watchdog Interface. */ 344 /* 0x101e2000 Timer 0/1. */ 345 /* 0x101e3000 Timer 2/3. */ 346 /* 0x101e4000 GPIO port 0. */ 347 /* 0x101e5000 GPIO port 1. */ 348 /* 0x101e6000 GPIO port 2. */ 349 /* 0x101e7000 GPIO port 3. */ 350 /* 0x101e8000 RTC. */ 351 /* 0x101f0000 Smart card 0. */ 352 /* 0x101f1000 UART0. */ 353 /* 0x101f2000 UART1. */ 354 /* 0x101f3000 UART2. */ 355 /* 0x101f4000 SSPI. */ 356 /* 0x34000000 NOR Flash */ 357 358 dinfo = drive_get(IF_PFLASH, 0, 0); 359 if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, NULL, "versatile.flash", 360 VERSATILE_FLASH_SIZE, 361 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 362 VERSATILE_FLASH_SECT_SIZE, 363 VERSATILE_FLASH_SIZE / VERSATILE_FLASH_SECT_SIZE, 364 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { 365 fprintf(stderr, "qemu: Error registering flash memory.\n"); 366 } 367 368 versatile_binfo.ram_size = machine->ram_size; 369 versatile_binfo.kernel_filename = machine->kernel_filename; 370 versatile_binfo.kernel_cmdline = machine->kernel_cmdline; 371 versatile_binfo.initrd_filename = machine->initrd_filename; 372 versatile_binfo.board_id = board_id; 373 arm_load_kernel(cpu, &versatile_binfo); 374 } 375 376 static void vpb_init(MachineState *machine) 377 { 378 versatile_init(machine, 0x183); 379 } 380 381 static void vab_init(MachineState *machine) 382 { 383 versatile_init(machine, 0x25e); 384 } 385 386 static void versatilepb_class_init(ObjectClass *oc, void *data) 387 { 388 MachineClass *mc = MACHINE_CLASS(oc); 389 390 mc->desc = "ARM Versatile/PB (ARM926EJ-S)"; 391 mc->init = vpb_init; 392 mc->block_default_type = IF_SCSI; 393 } 394 395 static const TypeInfo versatilepb_type = { 396 .name = MACHINE_TYPE_NAME("versatilepb"), 397 .parent = TYPE_MACHINE, 398 .class_init = versatilepb_class_init, 399 }; 400 401 static void versatileab_class_init(ObjectClass *oc, void *data) 402 { 403 MachineClass *mc = MACHINE_CLASS(oc); 404 405 mc->desc = "ARM Versatile/AB (ARM926EJ-S)"; 406 mc->init = vab_init; 407 mc->block_default_type = IF_SCSI; 408 } 409 410 static const TypeInfo versatileab_type = { 411 .name = MACHINE_TYPE_NAME("versatileab"), 412 .parent = TYPE_MACHINE, 413 .class_init = versatileab_class_init, 414 }; 415 416 static void versatile_machine_init(void) 417 { 418 type_register_static(&versatilepb_type); 419 type_register_static(&versatileab_type); 420 } 421 422 machine_init(versatile_machine_init) 423 424 static void vpb_sic_class_init(ObjectClass *klass, void *data) 425 { 426 DeviceClass *dc = DEVICE_CLASS(klass); 427 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); 428 429 k->init = vpb_sic_init; 430 dc->vmsd = &vmstate_vpb_sic; 431 } 432 433 static const TypeInfo vpb_sic_info = { 434 .name = TYPE_VERSATILE_PB_SIC, 435 .parent = TYPE_SYS_BUS_DEVICE, 436 .instance_size = sizeof(vpb_sic_state), 437 .class_init = vpb_sic_class_init, 438 }; 439 440 static void versatilepb_register_types(void) 441 { 442 type_register_static(&vpb_sic_info); 443 } 444 445 type_init(versatilepb_register_types) 446