1 /* 2 * ARM Versatile Express emulation. 3 * 4 * Copyright (c) 2010 - 2011 B Labs Ltd. 5 * Copyright (c) 2011 Linaro Limited 6 * Written by Bahadir Balban, Amit Mahajan, Peter Maydell 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 * 20 * Contributions after 2012-01-13 are licensed under the terms of the 21 * GNU GPL, version 2 or (at your option) any later version. 22 */ 23 24 #include "hw/sysbus.h" 25 #include "hw/arm/arm.h" 26 #include "hw/arm/primecell.h" 27 #include "hw/devices.h" 28 #include "net/net.h" 29 #include "sysemu/sysemu.h" 30 #include "hw/boards.h" 31 #include "hw/loader.h" 32 #include "exec/address-spaces.h" 33 #include "sysemu/block-backend.h" 34 #include "hw/block/flash.h" 35 #include "sysemu/device_tree.h" 36 #include "qemu/error-report.h" 37 #include <libfdt.h> 38 39 #define VEXPRESS_BOARD_ID 0x8e0 40 #define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024) 41 #define VEXPRESS_FLASH_SECT_SIZE (256 * 1024) 42 43 /* Number of virtio transports to create (0..8; limited by 44 * number of available IRQ lines). 45 */ 46 #define NUM_VIRTIO_TRANSPORTS 4 47 48 /* Address maps for peripherals: 49 * the Versatile Express motherboard has two possible maps, 50 * the "legacy" one (used for A9) and the "Cortex-A Series" 51 * map (used for newer cores). 52 * Individual daughterboards can also have different maps for 53 * their peripherals. 54 */ 55 56 enum { 57 VE_SYSREGS, 58 VE_SP810, 59 VE_SERIALPCI, 60 VE_PL041, 61 VE_MMCI, 62 VE_KMI0, 63 VE_KMI1, 64 VE_UART0, 65 VE_UART1, 66 VE_UART2, 67 VE_UART3, 68 VE_WDT, 69 VE_TIMER01, 70 VE_TIMER23, 71 VE_SERIALDVI, 72 VE_RTC, 73 VE_COMPACTFLASH, 74 VE_CLCD, 75 VE_NORFLASH0, 76 VE_NORFLASH1, 77 VE_NORFLASHALIAS, 78 VE_SRAM, 79 VE_VIDEORAM, 80 VE_ETHERNET, 81 VE_USB, 82 VE_DAPROM, 83 VE_VIRTIO, 84 }; 85 86 static hwaddr motherboard_legacy_map[] = { 87 [VE_NORFLASHALIAS] = 0, 88 /* CS7: 0x10000000 .. 0x10020000 */ 89 [VE_SYSREGS] = 0x10000000, 90 [VE_SP810] = 0x10001000, 91 [VE_SERIALPCI] = 0x10002000, 92 [VE_PL041] = 0x10004000, 93 [VE_MMCI] = 0x10005000, 94 [VE_KMI0] = 0x10006000, 95 [VE_KMI1] = 0x10007000, 96 [VE_UART0] = 0x10009000, 97 [VE_UART1] = 0x1000a000, 98 [VE_UART2] = 0x1000b000, 99 [VE_UART3] = 0x1000c000, 100 [VE_WDT] = 0x1000f000, 101 [VE_TIMER01] = 0x10011000, 102 [VE_TIMER23] = 0x10012000, 103 [VE_VIRTIO] = 0x10013000, 104 [VE_SERIALDVI] = 0x10016000, 105 [VE_RTC] = 0x10017000, 106 [VE_COMPACTFLASH] = 0x1001a000, 107 [VE_CLCD] = 0x1001f000, 108 /* CS0: 0x40000000 .. 0x44000000 */ 109 [VE_NORFLASH0] = 0x40000000, 110 /* CS1: 0x44000000 .. 0x48000000 */ 111 [VE_NORFLASH1] = 0x44000000, 112 /* CS2: 0x48000000 .. 0x4a000000 */ 113 [VE_SRAM] = 0x48000000, 114 /* CS3: 0x4c000000 .. 0x50000000 */ 115 [VE_VIDEORAM] = 0x4c000000, 116 [VE_ETHERNET] = 0x4e000000, 117 [VE_USB] = 0x4f000000, 118 }; 119 120 static hwaddr motherboard_aseries_map[] = { 121 [VE_NORFLASHALIAS] = 0, 122 /* CS0: 0x08000000 .. 0x0c000000 */ 123 [VE_NORFLASH0] = 0x08000000, 124 /* CS4: 0x0c000000 .. 0x10000000 */ 125 [VE_NORFLASH1] = 0x0c000000, 126 /* CS5: 0x10000000 .. 0x14000000 */ 127 /* CS1: 0x14000000 .. 0x18000000 */ 128 [VE_SRAM] = 0x14000000, 129 /* CS2: 0x18000000 .. 0x1c000000 */ 130 [VE_VIDEORAM] = 0x18000000, 131 [VE_ETHERNET] = 0x1a000000, 132 [VE_USB] = 0x1b000000, 133 /* CS3: 0x1c000000 .. 0x20000000 */ 134 [VE_DAPROM] = 0x1c000000, 135 [VE_SYSREGS] = 0x1c010000, 136 [VE_SP810] = 0x1c020000, 137 [VE_SERIALPCI] = 0x1c030000, 138 [VE_PL041] = 0x1c040000, 139 [VE_MMCI] = 0x1c050000, 140 [VE_KMI0] = 0x1c060000, 141 [VE_KMI1] = 0x1c070000, 142 [VE_UART0] = 0x1c090000, 143 [VE_UART1] = 0x1c0a0000, 144 [VE_UART2] = 0x1c0b0000, 145 [VE_UART3] = 0x1c0c0000, 146 [VE_WDT] = 0x1c0f0000, 147 [VE_TIMER01] = 0x1c110000, 148 [VE_TIMER23] = 0x1c120000, 149 [VE_VIRTIO] = 0x1c130000, 150 [VE_SERIALDVI] = 0x1c160000, 151 [VE_RTC] = 0x1c170000, 152 [VE_COMPACTFLASH] = 0x1c1a0000, 153 [VE_CLCD] = 0x1c1f0000, 154 }; 155 156 /* Structure defining the peculiarities of a specific daughterboard */ 157 158 typedef struct VEDBoardInfo VEDBoardInfo; 159 160 typedef struct { 161 MachineClass parent; 162 VEDBoardInfo *daughterboard; 163 } VexpressMachineClass; 164 165 typedef struct { 166 MachineState parent; 167 bool secure; 168 } VexpressMachineState; 169 170 #define TYPE_VEXPRESS_MACHINE "vexpress" 171 #define TYPE_VEXPRESS_A9_MACHINE "vexpress-a9" 172 #define TYPE_VEXPRESS_A15_MACHINE "vexpress-a15" 173 #define VEXPRESS_MACHINE(obj) \ 174 OBJECT_CHECK(VexpressMachineState, (obj), TYPE_VEXPRESS_MACHINE) 175 #define VEXPRESS_MACHINE_GET_CLASS(obj) \ 176 OBJECT_GET_CLASS(VexpressMachineClass, obj, TYPE_VEXPRESS_MACHINE) 177 #define VEXPRESS_MACHINE_CLASS(klass) \ 178 OBJECT_CLASS_CHECK(VexpressMachineClass, klass, TYPE_VEXPRESS_MACHINE) 179 180 typedef void DBoardInitFn(const VexpressMachineState *machine, 181 ram_addr_t ram_size, 182 const char *cpu_model, 183 qemu_irq *pic); 184 185 struct VEDBoardInfo { 186 struct arm_boot_info bootinfo; 187 const hwaddr *motherboard_map; 188 hwaddr loader_start; 189 const hwaddr gic_cpu_if_addr; 190 uint32_t proc_id; 191 uint32_t num_voltage_sensors; 192 const uint32_t *voltages; 193 uint32_t num_clocks; 194 const uint32_t *clocks; 195 DBoardInitFn *init; 196 }; 197 198 static void init_cpus(const char *cpu_model, const char *privdev, 199 hwaddr periphbase, qemu_irq *pic, bool secure) 200 { 201 ObjectClass *cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model); 202 DeviceState *dev; 203 SysBusDevice *busdev; 204 int n; 205 206 if (!cpu_oc) { 207 fprintf(stderr, "Unable to find CPU definition\n"); 208 exit(1); 209 } 210 211 /* Create the actual CPUs */ 212 for (n = 0; n < smp_cpus; n++) { 213 Object *cpuobj = object_new(object_class_get_name(cpu_oc)); 214 Error *err = NULL; 215 216 if (!secure) { 217 object_property_set_bool(cpuobj, false, "has_el3", NULL); 218 } 219 220 if (object_property_find(cpuobj, "reset-cbar", NULL)) { 221 object_property_set_int(cpuobj, periphbase, 222 "reset-cbar", &error_abort); 223 } 224 object_property_set_bool(cpuobj, true, "realized", &err); 225 if (err) { 226 error_report_err(err); 227 exit(1); 228 } 229 } 230 231 /* Create the private peripheral devices (including the GIC); 232 * this must happen after the CPUs are created because a15mpcore_priv 233 * wires itself up to the CPU's generic_timer gpio out lines. 234 */ 235 dev = qdev_create(NULL, privdev); 236 qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); 237 qdev_init_nofail(dev); 238 busdev = SYS_BUS_DEVICE(dev); 239 sysbus_mmio_map(busdev, 0, periphbase); 240 241 /* Interrupts [42:0] are from the motherboard; 242 * [47:43] are reserved; [63:48] are daughterboard 243 * peripherals. Note that some documentation numbers 244 * external interrupts starting from 32 (because there 245 * are internal interrupts 0..31). 246 */ 247 for (n = 0; n < 64; n++) { 248 pic[n] = qdev_get_gpio_in(dev, n); 249 } 250 251 /* Connect the CPUs to the GIC */ 252 for (n = 0; n < smp_cpus; n++) { 253 DeviceState *cpudev = DEVICE(qemu_get_cpu(n)); 254 255 sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); 256 } 257 } 258 259 static void a9_daughterboard_init(const VexpressMachineState *vms, 260 ram_addr_t ram_size, 261 const char *cpu_model, 262 qemu_irq *pic) 263 { 264 MemoryRegion *sysmem = get_system_memory(); 265 MemoryRegion *ram = g_new(MemoryRegion, 1); 266 MemoryRegion *lowram = g_new(MemoryRegion, 1); 267 ram_addr_t low_ram_size; 268 269 if (!cpu_model) { 270 cpu_model = "cortex-a9"; 271 } 272 273 if (ram_size > 0x40000000) { 274 /* 1GB is the maximum the address space permits */ 275 fprintf(stderr, "vexpress-a9: cannot model more than 1GB RAM\n"); 276 exit(1); 277 } 278 279 memory_region_init_ram(ram, NULL, "vexpress.highmem", ram_size, 280 &error_abort); 281 vmstate_register_ram_global(ram); 282 low_ram_size = ram_size; 283 if (low_ram_size > 0x4000000) { 284 low_ram_size = 0x4000000; 285 } 286 /* RAM is from 0x60000000 upwards. The bottom 64MB of the 287 * address space should in theory be remappable to various 288 * things including ROM or RAM; we always map the RAM there. 289 */ 290 memory_region_init_alias(lowram, NULL, "vexpress.lowmem", ram, 0, low_ram_size); 291 memory_region_add_subregion(sysmem, 0x0, lowram); 292 memory_region_add_subregion(sysmem, 0x60000000, ram); 293 294 /* 0x1e000000 A9MPCore (SCU) private memory region */ 295 init_cpus(cpu_model, "a9mpcore_priv", 0x1e000000, pic, vms->secure); 296 297 /* Daughterboard peripherals : 0x10020000 .. 0x20000000 */ 298 299 /* 0x10020000 PL111 CLCD (daughterboard) */ 300 sysbus_create_simple("pl111", 0x10020000, pic[44]); 301 302 /* 0x10060000 AXI RAM */ 303 /* 0x100e0000 PL341 Dynamic Memory Controller */ 304 /* 0x100e1000 PL354 Static Memory Controller */ 305 /* 0x100e2000 System Configuration Controller */ 306 307 sysbus_create_simple("sp804", 0x100e4000, pic[48]); 308 /* 0x100e5000 SP805 Watchdog module */ 309 /* 0x100e6000 BP147 TrustZone Protection Controller */ 310 /* 0x100e9000 PL301 'Fast' AXI matrix */ 311 /* 0x100ea000 PL301 'Slow' AXI matrix */ 312 /* 0x100ec000 TrustZone Address Space Controller */ 313 /* 0x10200000 CoreSight debug APB */ 314 /* 0x1e00a000 PL310 L2 Cache Controller */ 315 sysbus_create_varargs("l2x0", 0x1e00a000, NULL); 316 } 317 318 /* Voltage values for SYS_CFG_VOLT daughterboard registers; 319 * values are in microvolts. 320 */ 321 static const uint32_t a9_voltages[] = { 322 1000000, /* VD10 : 1.0V : SoC internal logic voltage */ 323 1000000, /* VD10_S2 : 1.0V : PL310, L2 cache, RAM, non-PL310 logic */ 324 1000000, /* VD10_S3 : 1.0V : Cortex-A9, cores, MPEs, SCU, PL310 logic */ 325 1800000, /* VCC1V8 : 1.8V : DDR2 SDRAM, test chip DDR2 I/O supply */ 326 900000, /* DDR2VTT : 0.9V : DDR2 SDRAM VTT termination voltage */ 327 3300000, /* VCC3V3 : 3.3V : local board supply for misc external logic */ 328 }; 329 330 /* Reset values for daughterboard oscillators (in Hz) */ 331 static const uint32_t a9_clocks[] = { 332 45000000, /* AMBA AXI ACLK: 45MHz */ 333 23750000, /* daughterboard CLCD clock: 23.75MHz */ 334 66670000, /* Test chip reference clock: 66.67MHz */ 335 }; 336 337 static VEDBoardInfo a9_daughterboard = { 338 .motherboard_map = motherboard_legacy_map, 339 .loader_start = 0x60000000, 340 .gic_cpu_if_addr = 0x1e000100, 341 .proc_id = 0x0c000191, 342 .num_voltage_sensors = ARRAY_SIZE(a9_voltages), 343 .voltages = a9_voltages, 344 .num_clocks = ARRAY_SIZE(a9_clocks), 345 .clocks = a9_clocks, 346 .init = a9_daughterboard_init, 347 }; 348 349 static void a15_daughterboard_init(const VexpressMachineState *vms, 350 ram_addr_t ram_size, 351 const char *cpu_model, 352 qemu_irq *pic) 353 { 354 MemoryRegion *sysmem = get_system_memory(); 355 MemoryRegion *ram = g_new(MemoryRegion, 1); 356 MemoryRegion *sram = g_new(MemoryRegion, 1); 357 358 if (!cpu_model) { 359 cpu_model = "cortex-a15"; 360 } 361 362 { 363 /* We have to use a separate 64 bit variable here to avoid the gcc 364 * "comparison is always false due to limited range of data type" 365 * warning if we are on a host where ram_addr_t is 32 bits. 366 */ 367 uint64_t rsz = ram_size; 368 if (rsz > (30ULL * 1024 * 1024 * 1024)) { 369 fprintf(stderr, "vexpress-a15: cannot model more than 30GB RAM\n"); 370 exit(1); 371 } 372 } 373 374 memory_region_init_ram(ram, NULL, "vexpress.highmem", ram_size, 375 &error_abort); 376 vmstate_register_ram_global(ram); 377 /* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */ 378 memory_region_add_subregion(sysmem, 0x80000000, ram); 379 380 /* 0x2c000000 A15MPCore private memory region (GIC) */ 381 init_cpus(cpu_model, "a15mpcore_priv", 0x2c000000, pic, vms->secure); 382 383 /* A15 daughterboard peripherals: */ 384 385 /* 0x20000000: CoreSight interfaces: not modelled */ 386 /* 0x2a000000: PL301 AXI interconnect: not modelled */ 387 /* 0x2a420000: SCC: not modelled */ 388 /* 0x2a430000: system counter: not modelled */ 389 /* 0x2b000000: HDLCD controller: not modelled */ 390 /* 0x2b060000: SP805 watchdog: not modelled */ 391 /* 0x2b0a0000: PL341 dynamic memory controller: not modelled */ 392 /* 0x2e000000: system SRAM */ 393 memory_region_init_ram(sram, NULL, "vexpress.a15sram", 0x10000, 394 &error_abort); 395 vmstate_register_ram_global(sram); 396 memory_region_add_subregion(sysmem, 0x2e000000, sram); 397 398 /* 0x7ffb0000: DMA330 DMA controller: not modelled */ 399 /* 0x7ffd0000: PL354 static memory controller: not modelled */ 400 } 401 402 static const uint32_t a15_voltages[] = { 403 900000, /* Vcore: 0.9V : CPU core voltage */ 404 }; 405 406 static const uint32_t a15_clocks[] = { 407 60000000, /* OSCCLK0: 60MHz : CPU_CLK reference */ 408 0, /* OSCCLK1: reserved */ 409 0, /* OSCCLK2: reserved */ 410 0, /* OSCCLK3: reserved */ 411 40000000, /* OSCCLK4: 40MHz : external AXI master clock */ 412 23750000, /* OSCCLK5: 23.75MHz : HDLCD PLL reference */ 413 50000000, /* OSCCLK6: 50MHz : static memory controller clock */ 414 60000000, /* OSCCLK7: 60MHz : SYSCLK reference */ 415 40000000, /* OSCCLK8: 40MHz : DDR2 PLL reference */ 416 }; 417 418 static VEDBoardInfo a15_daughterboard = { 419 .motherboard_map = motherboard_aseries_map, 420 .loader_start = 0x80000000, 421 .gic_cpu_if_addr = 0x2c002000, 422 .proc_id = 0x14000237, 423 .num_voltage_sensors = ARRAY_SIZE(a15_voltages), 424 .voltages = a15_voltages, 425 .num_clocks = ARRAY_SIZE(a15_clocks), 426 .clocks = a15_clocks, 427 .init = a15_daughterboard_init, 428 }; 429 430 static int add_virtio_mmio_node(void *fdt, uint32_t acells, uint32_t scells, 431 hwaddr addr, hwaddr size, uint32_t intc, 432 int irq) 433 { 434 /* Add a virtio_mmio node to the device tree blob: 435 * virtio_mmio@ADDRESS { 436 * compatible = "virtio,mmio"; 437 * reg = <ADDRESS, SIZE>; 438 * interrupt-parent = <&intc>; 439 * interrupts = <0, irq, 1>; 440 * } 441 * (Note that the format of the interrupts property is dependent on the 442 * interrupt controller that interrupt-parent points to; these are for 443 * the ARM GIC and indicate an SPI interrupt, rising-edge-triggered.) 444 */ 445 int rc; 446 char *nodename = g_strdup_printf("/virtio_mmio@%" PRIx64, addr); 447 448 rc = qemu_fdt_add_subnode(fdt, nodename); 449 rc |= qemu_fdt_setprop_string(fdt, nodename, 450 "compatible", "virtio,mmio"); 451 rc |= qemu_fdt_setprop_sized_cells(fdt, nodename, "reg", 452 acells, addr, scells, size); 453 qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", intc); 454 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 0, irq, 1); 455 g_free(nodename); 456 if (rc) { 457 return -1; 458 } 459 return 0; 460 } 461 462 static uint32_t find_int_controller(void *fdt) 463 { 464 /* Find the FDT node corresponding to the interrupt controller 465 * for virtio-mmio devices. We do this by scanning the fdt for 466 * a node with the right compatibility, since we know there is 467 * only one GIC on a vexpress board. 468 * We return the phandle of the node, or 0 if none was found. 469 */ 470 const char *compat = "arm,cortex-a9-gic"; 471 int offset; 472 473 offset = fdt_node_offset_by_compatible(fdt, -1, compat); 474 if (offset >= 0) { 475 return fdt_get_phandle(fdt, offset); 476 } 477 return 0; 478 } 479 480 static void vexpress_modify_dtb(const struct arm_boot_info *info, void *fdt) 481 { 482 uint32_t acells, scells, intc; 483 const VEDBoardInfo *daughterboard = (const VEDBoardInfo *)info; 484 485 acells = qemu_fdt_getprop_cell(fdt, "/", "#address-cells"); 486 scells = qemu_fdt_getprop_cell(fdt, "/", "#size-cells"); 487 intc = find_int_controller(fdt); 488 if (!intc) { 489 /* Not fatal, we just won't provide virtio. This will 490 * happen with older device tree blobs. 491 */ 492 fprintf(stderr, "QEMU: warning: couldn't find interrupt controller in " 493 "dtb; will not include virtio-mmio devices in the dtb.\n"); 494 } else { 495 int i; 496 const hwaddr *map = daughterboard->motherboard_map; 497 498 /* We iterate backwards here because adding nodes 499 * to the dtb puts them in last-first. 500 */ 501 for (i = NUM_VIRTIO_TRANSPORTS - 1; i >= 0; i--) { 502 add_virtio_mmio_node(fdt, acells, scells, 503 map[VE_VIRTIO] + 0x200 * i, 504 0x200, intc, 40 + i); 505 } 506 } 507 } 508 509 510 /* Open code a private version of pflash registration since we 511 * need to set non-default device width for VExpress platform. 512 */ 513 static pflash_t *ve_pflash_cfi01_register(hwaddr base, const char *name, 514 DriveInfo *di) 515 { 516 DeviceState *dev = qdev_create(NULL, "cfi.pflash01"); 517 518 if (di && qdev_prop_set_drive(dev, "drive", 519 blk_by_legacy_dinfo(di))) { 520 abort(); 521 } 522 523 qdev_prop_set_uint32(dev, "num-blocks", 524 VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE); 525 qdev_prop_set_uint64(dev, "sector-length", VEXPRESS_FLASH_SECT_SIZE); 526 qdev_prop_set_uint8(dev, "width", 4); 527 qdev_prop_set_uint8(dev, "device-width", 2); 528 qdev_prop_set_uint8(dev, "big-endian", 0); 529 qdev_prop_set_uint16(dev, "id0", 0x89); 530 qdev_prop_set_uint16(dev, "id1", 0x18); 531 qdev_prop_set_uint16(dev, "id2", 0x00); 532 qdev_prop_set_uint16(dev, "id3", 0x00); 533 qdev_prop_set_string(dev, "name", name); 534 qdev_init_nofail(dev); 535 536 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); 537 return OBJECT_CHECK(pflash_t, (dev), "cfi.pflash01"); 538 } 539 540 static void vexpress_common_init(MachineState *machine) 541 { 542 VexpressMachineState *vms = VEXPRESS_MACHINE(machine); 543 VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine); 544 VEDBoardInfo *daughterboard = vmc->daughterboard;; 545 DeviceState *dev, *sysctl, *pl041; 546 qemu_irq pic[64]; 547 uint32_t sys_id; 548 DriveInfo *dinfo; 549 pflash_t *pflash0; 550 ram_addr_t vram_size, sram_size; 551 MemoryRegion *sysmem = get_system_memory(); 552 MemoryRegion *vram = g_new(MemoryRegion, 1); 553 MemoryRegion *sram = g_new(MemoryRegion, 1); 554 MemoryRegion *flashalias = g_new(MemoryRegion, 1); 555 MemoryRegion *flash0mem; 556 const hwaddr *map = daughterboard->motherboard_map; 557 int i; 558 559 daughterboard->init(vms, machine->ram_size, machine->cpu_model, pic); 560 561 /* 562 * If a bios file was provided, attempt to map it into memory 563 */ 564 if (bios_name) { 565 const char *fn; 566 567 if (drive_get(IF_PFLASH, 0, 0)) { 568 error_report("The contents of the first flash device may be " 569 "specified with -bios or with -drive if=pflash... " 570 "but you cannot use both options at once"); 571 exit(1); 572 } 573 fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); 574 if (!fn || load_image_targphys(fn, map[VE_NORFLASH0], 575 VEXPRESS_FLASH_SIZE) < 0) { 576 error_report("Could not load ROM image '%s'", bios_name); 577 exit(1); 578 } 579 } 580 581 /* Motherboard peripherals: the wiring is the same but the 582 * addresses vary between the legacy and A-Series memory maps. 583 */ 584 585 sys_id = 0x1190f500; 586 587 sysctl = qdev_create(NULL, "realview_sysctl"); 588 qdev_prop_set_uint32(sysctl, "sys_id", sys_id); 589 qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id); 590 qdev_prop_set_uint32(sysctl, "len-db-voltage", 591 daughterboard->num_voltage_sensors); 592 for (i = 0; i < daughterboard->num_voltage_sensors; i++) { 593 char *propname = g_strdup_printf("db-voltage[%d]", i); 594 qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]); 595 g_free(propname); 596 } 597 qdev_prop_set_uint32(sysctl, "len-db-clock", 598 daughterboard->num_clocks); 599 for (i = 0; i < daughterboard->num_clocks; i++) { 600 char *propname = g_strdup_printf("db-clock[%d]", i); 601 qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]); 602 g_free(propname); 603 } 604 qdev_init_nofail(sysctl); 605 sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]); 606 607 /* VE_SP810: not modelled */ 608 /* VE_SERIALPCI: not modelled */ 609 610 pl041 = qdev_create(NULL, "pl041"); 611 qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); 612 qdev_init_nofail(pl041); 613 sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]); 614 sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]); 615 616 dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL); 617 /* Wire up MMC card detect and read-only signals */ 618 qdev_connect_gpio_out(dev, 0, 619 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT)); 620 qdev_connect_gpio_out(dev, 1, 621 qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN)); 622 623 sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]); 624 sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]); 625 626 sysbus_create_simple("pl011", map[VE_UART0], pic[5]); 627 sysbus_create_simple("pl011", map[VE_UART1], pic[6]); 628 sysbus_create_simple("pl011", map[VE_UART2], pic[7]); 629 sysbus_create_simple("pl011", map[VE_UART3], pic[8]); 630 631 sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]); 632 sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]); 633 634 /* VE_SERIALDVI: not modelled */ 635 636 sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */ 637 638 /* VE_COMPACTFLASH: not modelled */ 639 640 sysbus_create_simple("pl111", map[VE_CLCD], pic[14]); 641 642 dinfo = drive_get_next(IF_PFLASH); 643 pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", 644 dinfo); 645 if (!pflash0) { 646 fprintf(stderr, "vexpress: error registering flash 0.\n"); 647 exit(1); 648 } 649 650 if (map[VE_NORFLASHALIAS] != -1) { 651 /* Map flash 0 as an alias into low memory */ 652 flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0); 653 memory_region_init_alias(flashalias, NULL, "vexpress.flashalias", 654 flash0mem, 0, VEXPRESS_FLASH_SIZE); 655 memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias); 656 } 657 658 dinfo = drive_get_next(IF_PFLASH); 659 if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", 660 dinfo)) { 661 fprintf(stderr, "vexpress: error registering flash 1.\n"); 662 exit(1); 663 } 664 665 sram_size = 0x2000000; 666 memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, 667 &error_abort); 668 vmstate_register_ram_global(sram); 669 memory_region_add_subregion(sysmem, map[VE_SRAM], sram); 670 671 vram_size = 0x800000; 672 memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size, 673 &error_abort); 674 vmstate_register_ram_global(vram); 675 memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram); 676 677 /* 0x4e000000 LAN9118 Ethernet */ 678 if (nd_table[0].used) { 679 lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]); 680 } 681 682 /* VE_USB: not modelled */ 683 684 /* VE_DAPROM: not modelled */ 685 686 /* Create mmio transports, so the user can create virtio backends 687 * (which will be automatically plugged in to the transports). If 688 * no backend is created the transport will just sit harmlessly idle. 689 */ 690 for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) { 691 sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i, 692 pic[40 + i]); 693 } 694 695 daughterboard->bootinfo.ram_size = machine->ram_size; 696 daughterboard->bootinfo.kernel_filename = machine->kernel_filename; 697 daughterboard->bootinfo.kernel_cmdline = machine->kernel_cmdline; 698 daughterboard->bootinfo.initrd_filename = machine->initrd_filename; 699 daughterboard->bootinfo.nb_cpus = smp_cpus; 700 daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID; 701 daughterboard->bootinfo.loader_start = daughterboard->loader_start; 702 daughterboard->bootinfo.smp_loader_start = map[VE_SRAM]; 703 daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30; 704 daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr; 705 daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb; 706 /* Indicate that when booting Linux we should be in secure state */ 707 daughterboard->bootinfo.secure_boot = true; 708 arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo); 709 } 710 711 static bool vexpress_get_secure(Object *obj, Error **errp) 712 { 713 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 714 715 return vms->secure; 716 } 717 718 static void vexpress_set_secure(Object *obj, bool value, Error **errp) 719 { 720 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 721 722 vms->secure = value; 723 } 724 725 static void vexpress_instance_init(Object *obj) 726 { 727 VexpressMachineState *vms = VEXPRESS_MACHINE(obj); 728 729 /* EL3 is enabled by default on vexpress */ 730 vms->secure = true; 731 object_property_add_bool(obj, "secure", vexpress_get_secure, 732 vexpress_set_secure, NULL); 733 object_property_set_description(obj, "secure", 734 "Set on/off to enable/disable the ARM " 735 "Security Extensions (TrustZone)", 736 NULL); 737 } 738 739 static void vexpress_class_init(ObjectClass *oc, void *data) 740 { 741 MachineClass *mc = MACHINE_CLASS(oc); 742 743 mc->name = TYPE_VEXPRESS_MACHINE; 744 mc->desc = "ARM Versatile Express"; 745 mc->init = vexpress_common_init; 746 mc->block_default_type = IF_SCSI; 747 mc->max_cpus = 4; 748 } 749 750 static void vexpress_a9_class_init(ObjectClass *oc, void *data) 751 { 752 MachineClass *mc = MACHINE_CLASS(oc); 753 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 754 755 mc->name = TYPE_VEXPRESS_A9_MACHINE; 756 mc->desc = "ARM Versatile Express for Cortex-A9"; 757 758 vmc->daughterboard = &a9_daughterboard;; 759 } 760 761 static void vexpress_a15_class_init(ObjectClass *oc, void *data) 762 { 763 MachineClass *mc = MACHINE_CLASS(oc); 764 VexpressMachineClass *vmc = VEXPRESS_MACHINE_CLASS(oc); 765 766 mc->name = TYPE_VEXPRESS_A15_MACHINE; 767 mc->desc = "ARM Versatile Express for Cortex-A15"; 768 769 vmc->daughterboard = &a15_daughterboard; 770 } 771 772 static const TypeInfo vexpress_info = { 773 .name = TYPE_VEXPRESS_MACHINE, 774 .parent = TYPE_MACHINE, 775 .abstract = true, 776 .instance_size = sizeof(VexpressMachineState), 777 .instance_init = vexpress_instance_init, 778 .class_size = sizeof(VexpressMachineClass), 779 .class_init = vexpress_class_init, 780 }; 781 782 static const TypeInfo vexpress_a9_info = { 783 .name = TYPE_VEXPRESS_A9_MACHINE, 784 .parent = TYPE_VEXPRESS_MACHINE, 785 .class_init = vexpress_a9_class_init, 786 }; 787 788 static const TypeInfo vexpress_a15_info = { 789 .name = TYPE_VEXPRESS_A15_MACHINE, 790 .parent = TYPE_VEXPRESS_MACHINE, 791 .class_init = vexpress_a15_class_init, 792 }; 793 794 static void vexpress_machine_init(void) 795 { 796 type_register_static(&vexpress_info); 797 type_register_static(&vexpress_a9_info); 798 type_register_static(&vexpress_a15_info); 799 } 800 801 machine_init(vexpress_machine_init); 802