xref: /qemu/hw/char/parallel.c (revision f2ad72b3)
1 /*
2  * QEMU Parallel PORT emulation
3  *
4  * Copyright (c) 2003-2005 Fabrice Bellard
5  * Copyright (c) 2007 Marko Kohtala
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 #include "qemu/osdep.h"
26 #include "hw/hw.h"
27 #include "sysemu/char.h"
28 #include "hw/isa/isa.h"
29 #include "hw/i386/pc.h"
30 #include "sysemu/sysemu.h"
31 
32 //#define DEBUG_PARALLEL
33 
34 #ifdef DEBUG_PARALLEL
35 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
36 #else
37 #define pdebug(fmt, ...) ((void)0)
38 #endif
39 
40 #define PARA_REG_DATA 0
41 #define PARA_REG_STS 1
42 #define PARA_REG_CTR 2
43 #define PARA_REG_EPP_ADDR 3
44 #define PARA_REG_EPP_DATA 4
45 
46 /*
47  * These are the definitions for the Printer Status Register
48  */
49 #define PARA_STS_BUSY	0x80	/* Busy complement */
50 #define PARA_STS_ACK	0x40	/* Acknowledge */
51 #define PARA_STS_PAPER	0x20	/* Out of paper */
52 #define PARA_STS_ONLINE	0x10	/* Online */
53 #define PARA_STS_ERROR	0x08	/* Error complement */
54 #define PARA_STS_TMOUT	0x01	/* EPP timeout */
55 
56 /*
57  * These are the definitions for the Printer Control Register
58  */
59 #define PARA_CTR_DIR	0x20	/* Direction (1=read, 0=write) */
60 #define PARA_CTR_INTEN	0x10	/* IRQ Enable */
61 #define PARA_CTR_SELECT	0x08	/* Select In complement */
62 #define PARA_CTR_INIT	0x04	/* Initialize Printer complement */
63 #define PARA_CTR_AUTOLF	0x02	/* Auto linefeed complement */
64 #define PARA_CTR_STROBE	0x01	/* Strobe complement */
65 
66 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
67 
68 typedef struct ParallelState {
69     MemoryRegion iomem;
70     uint8_t dataw;
71     uint8_t datar;
72     uint8_t status;
73     uint8_t control;
74     qemu_irq irq;
75     int irq_pending;
76     CharDriverState *chr;
77     int hw_driver;
78     int epp_timeout;
79     uint32_t last_read_offset; /* For debugging */
80     /* Memory-mapped interface */
81     int it_shift;
82 } ParallelState;
83 
84 #define TYPE_ISA_PARALLEL "isa-parallel"
85 #define ISA_PARALLEL(obj) \
86     OBJECT_CHECK(ISAParallelState, (obj), TYPE_ISA_PARALLEL)
87 
88 typedef struct ISAParallelState {
89     ISADevice parent_obj;
90 
91     uint32_t index;
92     uint32_t iobase;
93     uint32_t isairq;
94     ParallelState state;
95 } ISAParallelState;
96 
97 static void parallel_update_irq(ParallelState *s)
98 {
99     if (s->irq_pending)
100         qemu_irq_raise(s->irq);
101     else
102         qemu_irq_lower(s->irq);
103 }
104 
105 static void
106 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
107 {
108     ParallelState *s = opaque;
109 
110     pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
111 
112     addr &= 7;
113     switch(addr) {
114     case PARA_REG_DATA:
115         s->dataw = val;
116         parallel_update_irq(s);
117         break;
118     case PARA_REG_CTR:
119         val |= 0xc0;
120         if ((val & PARA_CTR_INIT) == 0 ) {
121             s->status = PARA_STS_BUSY;
122             s->status |= PARA_STS_ACK;
123             s->status |= PARA_STS_ONLINE;
124             s->status |= PARA_STS_ERROR;
125         }
126         else if (val & PARA_CTR_SELECT) {
127             if (val & PARA_CTR_STROBE) {
128                 s->status &= ~PARA_STS_BUSY;
129                 if ((s->control & PARA_CTR_STROBE) == 0)
130                     qemu_chr_fe_write(s->chr, &s->dataw, 1);
131             } else {
132                 if (s->control & PARA_CTR_INTEN) {
133                     s->irq_pending = 1;
134                 }
135             }
136         }
137         parallel_update_irq(s);
138         s->control = val;
139         break;
140     }
141 }
142 
143 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
144 {
145     ParallelState *s = opaque;
146     uint8_t parm = val;
147     int dir;
148 
149     /* Sometimes programs do several writes for timing purposes on old
150        HW. Take care not to waste time on writes that do nothing. */
151 
152     s->last_read_offset = ~0U;
153 
154     addr &= 7;
155     switch(addr) {
156     case PARA_REG_DATA:
157         if (s->dataw == val)
158             return;
159         pdebug("wd%02x\n", val);
160         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
161         s->dataw = val;
162         break;
163     case PARA_REG_STS:
164         pdebug("ws%02x\n", val);
165         if (val & PARA_STS_TMOUT)
166             s->epp_timeout = 0;
167         break;
168     case PARA_REG_CTR:
169         val |= 0xc0;
170         if (s->control == val)
171             return;
172         pdebug("wc%02x\n", val);
173 
174         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
175             if (val & PARA_CTR_DIR) {
176                 dir = 1;
177             } else {
178                 dir = 0;
179             }
180             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
181             parm &= ~PARA_CTR_DIR;
182         }
183 
184         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
185         s->control = val;
186         break;
187     case PARA_REG_EPP_ADDR:
188         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
189             /* Controls not correct for EPP address cycle, so do nothing */
190             pdebug("wa%02x s\n", val);
191         else {
192             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
193             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
194                 s->epp_timeout = 1;
195                 pdebug("wa%02x t\n", val);
196             }
197             else
198                 pdebug("wa%02x\n", val);
199         }
200         break;
201     case PARA_REG_EPP_DATA:
202         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
203             /* Controls not correct for EPP data cycle, so do nothing */
204             pdebug("we%02x s\n", val);
205         else {
206             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
207             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
208                 s->epp_timeout = 1;
209                 pdebug("we%02x t\n", val);
210             }
211             else
212                 pdebug("we%02x\n", val);
213         }
214         break;
215     }
216 }
217 
218 static void
219 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
220 {
221     ParallelState *s = opaque;
222     uint16_t eppdata = cpu_to_le16(val);
223     int err;
224     struct ParallelIOArg ioarg = {
225         .buffer = &eppdata, .count = sizeof(eppdata)
226     };
227     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
228         /* Controls not correct for EPP data cycle, so do nothing */
229         pdebug("we%04x s\n", val);
230         return;
231     }
232     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
233     if (err) {
234         s->epp_timeout = 1;
235         pdebug("we%04x t\n", val);
236     }
237     else
238         pdebug("we%04x\n", val);
239 }
240 
241 static void
242 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
243 {
244     ParallelState *s = opaque;
245     uint32_t eppdata = cpu_to_le32(val);
246     int err;
247     struct ParallelIOArg ioarg = {
248         .buffer = &eppdata, .count = sizeof(eppdata)
249     };
250     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
251         /* Controls not correct for EPP data cycle, so do nothing */
252         pdebug("we%08x s\n", val);
253         return;
254     }
255     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
256     if (err) {
257         s->epp_timeout = 1;
258         pdebug("we%08x t\n", val);
259     }
260     else
261         pdebug("we%08x\n", val);
262 }
263 
264 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
265 {
266     ParallelState *s = opaque;
267     uint32_t ret = 0xff;
268 
269     addr &= 7;
270     switch(addr) {
271     case PARA_REG_DATA:
272         if (s->control & PARA_CTR_DIR)
273             ret = s->datar;
274         else
275             ret = s->dataw;
276         break;
277     case PARA_REG_STS:
278         ret = s->status;
279         s->irq_pending = 0;
280         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
281             /* XXX Fixme: wait 5 microseconds */
282             if (s->status & PARA_STS_ACK)
283                 s->status &= ~PARA_STS_ACK;
284             else {
285                 /* XXX Fixme: wait 5 microseconds */
286                 s->status |= PARA_STS_ACK;
287                 s->status |= PARA_STS_BUSY;
288             }
289         }
290         parallel_update_irq(s);
291         break;
292     case PARA_REG_CTR:
293         ret = s->control;
294         break;
295     }
296     pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
297     return ret;
298 }
299 
300 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
301 {
302     ParallelState *s = opaque;
303     uint8_t ret = 0xff;
304     addr &= 7;
305     switch(addr) {
306     case PARA_REG_DATA:
307         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
308         if (s->last_read_offset != addr || s->datar != ret)
309             pdebug("rd%02x\n", ret);
310         s->datar = ret;
311         break;
312     case PARA_REG_STS:
313         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
314         ret &= ~PARA_STS_TMOUT;
315         if (s->epp_timeout)
316             ret |= PARA_STS_TMOUT;
317         if (s->last_read_offset != addr || s->status != ret)
318             pdebug("rs%02x\n", ret);
319         s->status = ret;
320         break;
321     case PARA_REG_CTR:
322         /* s->control has some bits fixed to 1. It is zero only when
323            it has not been yet written to.  */
324         if (s->control == 0) {
325             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
326             if (s->last_read_offset != addr)
327                 pdebug("rc%02x\n", ret);
328             s->control = ret;
329         }
330         else {
331             ret = s->control;
332             if (s->last_read_offset != addr)
333                 pdebug("rc%02x\n", ret);
334         }
335         break;
336     case PARA_REG_EPP_ADDR:
337         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
338             /* Controls not correct for EPP addr cycle, so do nothing */
339             pdebug("ra%02x s\n", ret);
340         else {
341             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
342             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
343                 s->epp_timeout = 1;
344                 pdebug("ra%02x t\n", ret);
345             }
346             else
347                 pdebug("ra%02x\n", ret);
348         }
349         break;
350     case PARA_REG_EPP_DATA:
351         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
352             /* Controls not correct for EPP data cycle, so do nothing */
353             pdebug("re%02x s\n", ret);
354         else {
355             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
356             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
357                 s->epp_timeout = 1;
358                 pdebug("re%02x t\n", ret);
359             }
360             else
361                 pdebug("re%02x\n", ret);
362         }
363         break;
364     }
365     s->last_read_offset = addr;
366     return ret;
367 }
368 
369 static uint32_t
370 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
371 {
372     ParallelState *s = opaque;
373     uint32_t ret;
374     uint16_t eppdata = ~0;
375     int err;
376     struct ParallelIOArg ioarg = {
377         .buffer = &eppdata, .count = sizeof(eppdata)
378     };
379     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
380         /* Controls not correct for EPP data cycle, so do nothing */
381         pdebug("re%04x s\n", eppdata);
382         return eppdata;
383     }
384     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
385     ret = le16_to_cpu(eppdata);
386 
387     if (err) {
388         s->epp_timeout = 1;
389         pdebug("re%04x t\n", ret);
390     }
391     else
392         pdebug("re%04x\n", ret);
393     return ret;
394 }
395 
396 static uint32_t
397 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
398 {
399     ParallelState *s = opaque;
400     uint32_t ret;
401     uint32_t eppdata = ~0U;
402     int err;
403     struct ParallelIOArg ioarg = {
404         .buffer = &eppdata, .count = sizeof(eppdata)
405     };
406     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
407         /* Controls not correct for EPP data cycle, so do nothing */
408         pdebug("re%08x s\n", eppdata);
409         return eppdata;
410     }
411     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
412     ret = le32_to_cpu(eppdata);
413 
414     if (err) {
415         s->epp_timeout = 1;
416         pdebug("re%08x t\n", ret);
417     }
418     else
419         pdebug("re%08x\n", ret);
420     return ret;
421 }
422 
423 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
424 {
425     pdebug("wecp%d=%02x\n", addr & 7, val);
426 }
427 
428 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
429 {
430     uint8_t ret = 0xff;
431 
432     pdebug("recp%d:%02x\n", addr & 7, ret);
433     return ret;
434 }
435 
436 static void parallel_reset(void *opaque)
437 {
438     ParallelState *s = opaque;
439 
440     s->datar = ~0;
441     s->dataw = ~0;
442     s->status = PARA_STS_BUSY;
443     s->status |= PARA_STS_ACK;
444     s->status |= PARA_STS_ONLINE;
445     s->status |= PARA_STS_ERROR;
446     s->status |= PARA_STS_TMOUT;
447     s->control = PARA_CTR_SELECT;
448     s->control |= PARA_CTR_INIT;
449     s->control |= 0xc0;
450     s->irq_pending = 0;
451     s->hw_driver = 0;
452     s->epp_timeout = 0;
453     s->last_read_offset = ~0U;
454 }
455 
456 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
457 
458 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
459     { 0, 8, 1,
460       .read = parallel_ioport_read_hw,
461       .write = parallel_ioport_write_hw },
462     { 4, 1, 2,
463       .read = parallel_ioport_eppdata_read_hw2,
464       .write = parallel_ioport_eppdata_write_hw2 },
465     { 4, 1, 4,
466       .read = parallel_ioport_eppdata_read_hw4,
467       .write = parallel_ioport_eppdata_write_hw4 },
468     { 0x400, 8, 1,
469       .read = parallel_ioport_ecp_read,
470       .write = parallel_ioport_ecp_write },
471     PORTIO_END_OF_LIST(),
472 };
473 
474 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
475     { 0, 8, 1,
476       .read = parallel_ioport_read_sw,
477       .write = parallel_ioport_write_sw },
478     PORTIO_END_OF_LIST(),
479 };
480 
481 
482 static const VMStateDescription vmstate_parallel_isa = {
483     .name = "parallel_isa",
484     .version_id = 1,
485     .minimum_version_id = 1,
486     .fields      = (VMStateField[]) {
487         VMSTATE_UINT8(state.dataw, ISAParallelState),
488         VMSTATE_UINT8(state.datar, ISAParallelState),
489         VMSTATE_UINT8(state.status, ISAParallelState),
490         VMSTATE_UINT8(state.control, ISAParallelState),
491         VMSTATE_INT32(state.irq_pending, ISAParallelState),
492         VMSTATE_INT32(state.epp_timeout, ISAParallelState),
493         VMSTATE_END_OF_LIST()
494     }
495 };
496 
497 
498 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
499 {
500     static int index;
501     ISADevice *isadev = ISA_DEVICE(dev);
502     ISAParallelState *isa = ISA_PARALLEL(dev);
503     ParallelState *s = &isa->state;
504     int base;
505     uint8_t dummy;
506 
507     if (!s->chr) {
508         error_setg(errp, "Can't create parallel device, empty char device");
509         return;
510     }
511 
512     if (isa->index == -1) {
513         isa->index = index;
514     }
515     if (isa->index >= MAX_PARALLEL_PORTS) {
516         error_setg(errp, "Max. supported number of parallel ports is %d.",
517                    MAX_PARALLEL_PORTS);
518         return;
519     }
520     if (isa->iobase == -1) {
521         isa->iobase = isa_parallel_io[isa->index];
522     }
523     index++;
524 
525     base = isa->iobase;
526     isa_init_irq(isadev, &s->irq, isa->isairq);
527     qemu_register_reset(parallel_reset, s);
528 
529     if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
530         s->hw_driver = 1;
531         s->status = dummy;
532     }
533 
534     isa_register_portio_list(isadev, base,
535                              (s->hw_driver
536                               ? &isa_parallel_portio_hw_list[0]
537                               : &isa_parallel_portio_sw_list[0]),
538                              s, "parallel");
539 }
540 
541 /* Memory mapped interface */
542 static uint32_t parallel_mm_readb (void *opaque, hwaddr addr)
543 {
544     ParallelState *s = opaque;
545 
546     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
547 }
548 
549 static void parallel_mm_writeb (void *opaque,
550                                 hwaddr addr, uint32_t value)
551 {
552     ParallelState *s = opaque;
553 
554     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
555 }
556 
557 static uint32_t parallel_mm_readw (void *opaque, hwaddr addr)
558 {
559     ParallelState *s = opaque;
560 
561     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
562 }
563 
564 static void parallel_mm_writew (void *opaque,
565                                 hwaddr addr, uint32_t value)
566 {
567     ParallelState *s = opaque;
568 
569     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
570 }
571 
572 static uint32_t parallel_mm_readl (void *opaque, hwaddr addr)
573 {
574     ParallelState *s = opaque;
575 
576     return parallel_ioport_read_sw(s, addr >> s->it_shift);
577 }
578 
579 static void parallel_mm_writel (void *opaque,
580                                 hwaddr addr, uint32_t value)
581 {
582     ParallelState *s = opaque;
583 
584     parallel_ioport_write_sw(s, addr >> s->it_shift, value);
585 }
586 
587 static const MemoryRegionOps parallel_mm_ops = {
588     .old_mmio = {
589         .read = { parallel_mm_readb, parallel_mm_readw, parallel_mm_readl },
590         .write = { parallel_mm_writeb, parallel_mm_writew, parallel_mm_writel },
591     },
592     .endianness = DEVICE_NATIVE_ENDIAN,
593 };
594 
595 /* If fd is zero, it means that the parallel device uses the console */
596 bool parallel_mm_init(MemoryRegion *address_space,
597                       hwaddr base, int it_shift, qemu_irq irq,
598                       CharDriverState *chr)
599 {
600     ParallelState *s;
601 
602     s = g_malloc0(sizeof(ParallelState));
603     s->irq = irq;
604     s->chr = chr;
605     s->it_shift = it_shift;
606     qemu_register_reset(parallel_reset, s);
607 
608     memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
609                           "parallel", 8 << it_shift);
610     memory_region_add_subregion(address_space, base, &s->iomem);
611     return true;
612 }
613 
614 static Property parallel_isa_properties[] = {
615     DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
616     DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1),
617     DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
618     DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
619     DEFINE_PROP_END_OF_LIST(),
620 };
621 
622 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
623 {
624     DeviceClass *dc = DEVICE_CLASS(klass);
625 
626     dc->realize = parallel_isa_realizefn;
627     dc->vmsd = &vmstate_parallel_isa;
628     dc->props = parallel_isa_properties;
629     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
630 }
631 
632 static const TypeInfo parallel_isa_info = {
633     .name          = TYPE_ISA_PARALLEL,
634     .parent        = TYPE_ISA_DEVICE,
635     .instance_size = sizeof(ISAParallelState),
636     .class_init    = parallel_isa_class_initfn,
637 };
638 
639 static void parallel_register_types(void)
640 {
641     type_register_static(&parallel_isa_info);
642 }
643 
644 type_init(parallel_register_types)
645