1 /* 2 * QEMU SM501 Device 3 * 4 * Copyright (c) 2008 Shin-ichiro KAWASAKI 5 * Copyright (c) 2016-2020 BALATON Zoltan 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "qemu/units.h" 28 #include "qapi/error.h" 29 #include "qemu/log.h" 30 #include "qemu/module.h" 31 #include "hw/char/serial.h" 32 #include "ui/console.h" 33 #include "hw/sysbus.h" 34 #include "migration/vmstate.h" 35 #include "hw/pci/pci.h" 36 #include "hw/qdev-properties.h" 37 #include "hw/i2c/i2c.h" 38 #include "hw/display/i2c-ddc.h" 39 #include "qemu/range.h" 40 #include "ui/pixel_ops.h" 41 #include "qemu/bswap.h" 42 #include "trace.h" 43 #include "qom/object.h" 44 45 #define MMIO_BASE_OFFSET 0x3e00000 46 #define MMIO_SIZE 0x200000 47 #define DC_PALETTE_ENTRIES (0x400 * 3) 48 49 /* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */ 50 51 /* System Configuration area */ 52 /* System config base */ 53 #define SM501_SYS_CONFIG (0x000000) 54 55 /* config 1 */ 56 #define SM501_SYSTEM_CONTROL (0x000000) 57 58 #define SM501_SYSCTRL_PANEL_TRISTATE (1 << 0) 59 #define SM501_SYSCTRL_MEM_TRISTATE (1 << 1) 60 #define SM501_SYSCTRL_CRT_TRISTATE (1 << 2) 61 62 #define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3 << 4) 63 #define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0 << 4) 64 #define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1 << 4) 65 #define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2 << 4) 66 #define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3 << 4) 67 68 #define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1 << 6) 69 #define SM501_SYSCTRL_PCI_RETRY_DISABLE (1 << 7) 70 #define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1 << 11) 71 #define SM501_SYSCTRL_PCI_BURST_READ_EN (1 << 15) 72 73 /* miscellaneous control */ 74 75 #define SM501_MISC_CONTROL (0x000004) 76 77 #define SM501_MISC_BUS_SH (0x0) 78 #define SM501_MISC_BUS_PCI (0x1) 79 #define SM501_MISC_BUS_XSCALE (0x2) 80 #define SM501_MISC_BUS_NEC (0x6) 81 #define SM501_MISC_BUS_MASK (0x7) 82 83 #define SM501_MISC_VR_62MB (1 << 3) 84 #define SM501_MISC_CDR_RESET (1 << 7) 85 #define SM501_MISC_USB_LB (1 << 8) 86 #define SM501_MISC_USB_SLAVE (1 << 9) 87 #define SM501_MISC_BL_1 (1 << 10) 88 #define SM501_MISC_MC (1 << 11) 89 #define SM501_MISC_DAC_POWER (1 << 12) 90 #define SM501_MISC_IRQ_INVERT (1 << 16) 91 #define SM501_MISC_SH (1 << 17) 92 93 #define SM501_MISC_HOLD_EMPTY (0 << 18) 94 #define SM501_MISC_HOLD_8 (1 << 18) 95 #define SM501_MISC_HOLD_16 (2 << 18) 96 #define SM501_MISC_HOLD_24 (3 << 18) 97 #define SM501_MISC_HOLD_32 (4 << 18) 98 #define SM501_MISC_HOLD_MASK (7 << 18) 99 100 #define SM501_MISC_FREQ_12 (1 << 24) 101 #define SM501_MISC_PNL_24BIT (1 << 25) 102 #define SM501_MISC_8051_LE (1 << 26) 103 104 105 106 #define SM501_GPIO31_0_CONTROL (0x000008) 107 #define SM501_GPIO63_32_CONTROL (0x00000C) 108 #define SM501_DRAM_CONTROL (0x000010) 109 110 /* command list */ 111 #define SM501_ARBTRTN_CONTROL (0x000014) 112 113 /* command list */ 114 #define SM501_COMMAND_LIST_STATUS (0x000024) 115 116 /* interrupt debug */ 117 #define SM501_RAW_IRQ_STATUS (0x000028) 118 #define SM501_RAW_IRQ_CLEAR (0x000028) 119 #define SM501_IRQ_STATUS (0x00002C) 120 #define SM501_IRQ_MASK (0x000030) 121 #define SM501_DEBUG_CONTROL (0x000034) 122 123 /* power management */ 124 #define SM501_POWERMODE_P2X_SRC (1 << 29) 125 #define SM501_POWERMODE_V2X_SRC (1 << 20) 126 #define SM501_POWERMODE_M_SRC (1 << 12) 127 #define SM501_POWERMODE_M1_SRC (1 << 4) 128 129 #define SM501_CURRENT_GATE (0x000038) 130 #define SM501_CURRENT_CLOCK (0x00003C) 131 #define SM501_POWER_MODE_0_GATE (0x000040) 132 #define SM501_POWER_MODE_0_CLOCK (0x000044) 133 #define SM501_POWER_MODE_1_GATE (0x000048) 134 #define SM501_POWER_MODE_1_CLOCK (0x00004C) 135 #define SM501_SLEEP_MODE_GATE (0x000050) 136 #define SM501_POWER_MODE_CONTROL (0x000054) 137 138 /* power gates for units within the 501 */ 139 #define SM501_GATE_HOST (0) 140 #define SM501_GATE_MEMORY (1) 141 #define SM501_GATE_DISPLAY (2) 142 #define SM501_GATE_2D_ENGINE (3) 143 #define SM501_GATE_CSC (4) 144 #define SM501_GATE_ZVPORT (5) 145 #define SM501_GATE_GPIO (6) 146 #define SM501_GATE_UART0 (7) 147 #define SM501_GATE_UART1 (8) 148 #define SM501_GATE_SSP (10) 149 #define SM501_GATE_USB_HOST (11) 150 #define SM501_GATE_USB_GADGET (12) 151 #define SM501_GATE_UCONTROLLER (17) 152 #define SM501_GATE_AC97 (18) 153 154 /* panel clock */ 155 #define SM501_CLOCK_P2XCLK (24) 156 /* crt clock */ 157 #define SM501_CLOCK_V2XCLK (16) 158 /* main clock */ 159 #define SM501_CLOCK_MCLK (8) 160 /* SDRAM controller clock */ 161 #define SM501_CLOCK_M1XCLK (0) 162 163 /* config 2 */ 164 #define SM501_PCI_MASTER_BASE (0x000058) 165 #define SM501_ENDIAN_CONTROL (0x00005C) 166 #define SM501_DEVICEID (0x000060) 167 /* 0x050100A0 */ 168 169 #define SM501_DEVICEID_SM501 (0x05010000) 170 #define SM501_DEVICEID_IDMASK (0xffff0000) 171 #define SM501_DEVICEID_REVMASK (0x000000ff) 172 173 #define SM501_PLLCLOCK_COUNT (0x000064) 174 #define SM501_MISC_TIMING (0x000068) 175 #define SM501_CURRENT_SDRAM_CLOCK (0x00006C) 176 177 #define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074) 178 179 /* GPIO base */ 180 #define SM501_GPIO (0x010000) 181 #define SM501_GPIO_DATA_LOW (0x00) 182 #define SM501_GPIO_DATA_HIGH (0x04) 183 #define SM501_GPIO_DDR_LOW (0x08) 184 #define SM501_GPIO_DDR_HIGH (0x0C) 185 #define SM501_GPIO_IRQ_SETUP (0x10) 186 #define SM501_GPIO_IRQ_STATUS (0x14) 187 #define SM501_GPIO_IRQ_RESET (0x14) 188 189 /* I2C controller base */ 190 #define SM501_I2C (0x010040) 191 #define SM501_I2C_BYTE_COUNT (0x00) 192 #define SM501_I2C_CONTROL (0x01) 193 #define SM501_I2C_STATUS (0x02) 194 #define SM501_I2C_RESET (0x02) 195 #define SM501_I2C_SLAVE_ADDRESS (0x03) 196 #define SM501_I2C_DATA (0x04) 197 198 #define SM501_I2C_CONTROL_START (1 << 2) 199 #define SM501_I2C_CONTROL_ENABLE (1 << 0) 200 201 #define SM501_I2C_STATUS_COMPLETE (1 << 3) 202 #define SM501_I2C_STATUS_ERROR (1 << 2) 203 204 #define SM501_I2C_RESET_ERROR (1 << 2) 205 206 /* SSP base */ 207 #define SM501_SSP (0x020000) 208 209 /* Uart 0 base */ 210 #define SM501_UART0 (0x030000) 211 212 /* Uart 1 base */ 213 #define SM501_UART1 (0x030020) 214 215 /* USB host port base */ 216 #define SM501_USB_HOST (0x040000) 217 218 /* USB slave/gadget base */ 219 #define SM501_USB_GADGET (0x060000) 220 221 /* USB slave/gadget data port base */ 222 #define SM501_USB_GADGET_DATA (0x070000) 223 224 /* Display controller/video engine base */ 225 #define SM501_DC (0x080000) 226 227 /* common defines for the SM501 address registers */ 228 #define SM501_ADDR_FLIP (1 << 31) 229 #define SM501_ADDR_EXT (1 << 27) 230 #define SM501_ADDR_CS1 (1 << 26) 231 #define SM501_ADDR_MASK (0x3f << 26) 232 233 #define SM501_FIFO_MASK (0x3 << 16) 234 #define SM501_FIFO_1 (0x0 << 16) 235 #define SM501_FIFO_3 (0x1 << 16) 236 #define SM501_FIFO_7 (0x2 << 16) 237 #define SM501_FIFO_11 (0x3 << 16) 238 239 /* common registers for panel and the crt */ 240 #define SM501_OFF_DC_H_TOT (0x000) 241 #define SM501_OFF_DC_V_TOT (0x008) 242 #define SM501_OFF_DC_H_SYNC (0x004) 243 #define SM501_OFF_DC_V_SYNC (0x00C) 244 245 #define SM501_DC_PANEL_CONTROL (0x000) 246 247 #define SM501_DC_PANEL_CONTROL_FPEN (1 << 27) 248 #define SM501_DC_PANEL_CONTROL_BIAS (1 << 26) 249 #define SM501_DC_PANEL_CONTROL_DATA (1 << 25) 250 #define SM501_DC_PANEL_CONTROL_VDD (1 << 24) 251 #define SM501_DC_PANEL_CONTROL_DP (1 << 23) 252 253 #define SM501_DC_PANEL_CONTROL_TFT_888 (0 << 21) 254 #define SM501_DC_PANEL_CONTROL_TFT_333 (1 << 21) 255 #define SM501_DC_PANEL_CONTROL_TFT_444 (2 << 21) 256 257 #define SM501_DC_PANEL_CONTROL_DE (1 << 20) 258 259 #define SM501_DC_PANEL_CONTROL_LCD_TFT (0 << 18) 260 #define SM501_DC_PANEL_CONTROL_LCD_STN8 (1 << 18) 261 #define SM501_DC_PANEL_CONTROL_LCD_STN12 (2 << 18) 262 263 #define SM501_DC_PANEL_CONTROL_CP (1 << 14) 264 #define SM501_DC_PANEL_CONTROL_VSP (1 << 13) 265 #define SM501_DC_PANEL_CONTROL_HSP (1 << 12) 266 #define SM501_DC_PANEL_CONTROL_CK (1 << 9) 267 #define SM501_DC_PANEL_CONTROL_TE (1 << 8) 268 #define SM501_DC_PANEL_CONTROL_VPD (1 << 7) 269 #define SM501_DC_PANEL_CONTROL_VP (1 << 6) 270 #define SM501_DC_PANEL_CONTROL_HPD (1 << 5) 271 #define SM501_DC_PANEL_CONTROL_HP (1 << 4) 272 #define SM501_DC_PANEL_CONTROL_GAMMA (1 << 3) 273 #define SM501_DC_PANEL_CONTROL_EN (1 << 2) 274 275 #define SM501_DC_PANEL_CONTROL_8BPP (0 << 0) 276 #define SM501_DC_PANEL_CONTROL_16BPP (1 << 0) 277 #define SM501_DC_PANEL_CONTROL_32BPP (2 << 0) 278 279 280 #define SM501_DC_PANEL_PANNING_CONTROL (0x004) 281 #define SM501_DC_PANEL_COLOR_KEY (0x008) 282 #define SM501_DC_PANEL_FB_ADDR (0x00C) 283 #define SM501_DC_PANEL_FB_OFFSET (0x010) 284 #define SM501_DC_PANEL_FB_WIDTH (0x014) 285 #define SM501_DC_PANEL_FB_HEIGHT (0x018) 286 #define SM501_DC_PANEL_TL_LOC (0x01C) 287 #define SM501_DC_PANEL_BR_LOC (0x020) 288 #define SM501_DC_PANEL_H_TOT (0x024) 289 #define SM501_DC_PANEL_H_SYNC (0x028) 290 #define SM501_DC_PANEL_V_TOT (0x02C) 291 #define SM501_DC_PANEL_V_SYNC (0x030) 292 #define SM501_DC_PANEL_CUR_LINE (0x034) 293 294 #define SM501_DC_VIDEO_CONTROL (0x040) 295 #define SM501_DC_VIDEO_FB0_ADDR (0x044) 296 #define SM501_DC_VIDEO_FB_WIDTH (0x048) 297 #define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C) 298 #define SM501_DC_VIDEO_TL_LOC (0x050) 299 #define SM501_DC_VIDEO_BR_LOC (0x054) 300 #define SM501_DC_VIDEO_SCALE (0x058) 301 #define SM501_DC_VIDEO_INIT_SCALE (0x05C) 302 #define SM501_DC_VIDEO_YUV_CONSTANTS (0x060) 303 #define SM501_DC_VIDEO_FB1_ADDR (0x064) 304 #define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068) 305 306 #define SM501_DC_VIDEO_ALPHA_CONTROL (0x080) 307 #define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084) 308 #define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088) 309 #define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C) 310 #define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090) 311 #define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094) 312 #define SM501_DC_VIDEO_ALPHA_SCALE (0x098) 313 #define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C) 314 #define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0) 315 #define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4) 316 317 #define SM501_DC_PANEL_HWC_BASE (0x0F0) 318 #define SM501_DC_PANEL_HWC_ADDR (0x0F0) 319 #define SM501_DC_PANEL_HWC_LOC (0x0F4) 320 #define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8) 321 #define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC) 322 323 #define SM501_HWC_EN (1 << 31) 324 325 #define SM501_OFF_HWC_ADDR (0x00) 326 #define SM501_OFF_HWC_LOC (0x04) 327 #define SM501_OFF_HWC_COLOR_1_2 (0x08) 328 #define SM501_OFF_HWC_COLOR_3 (0x0C) 329 330 #define SM501_DC_ALPHA_CONTROL (0x100) 331 #define SM501_DC_ALPHA_FB_ADDR (0x104) 332 #define SM501_DC_ALPHA_FB_OFFSET (0x108) 333 #define SM501_DC_ALPHA_TL_LOC (0x10C) 334 #define SM501_DC_ALPHA_BR_LOC (0x110) 335 #define SM501_DC_ALPHA_CHROMA_KEY (0x114) 336 #define SM501_DC_ALPHA_COLOR_LOOKUP (0x118) 337 338 #define SM501_DC_CRT_CONTROL (0x200) 339 340 #define SM501_DC_CRT_CONTROL_TVP (1 << 15) 341 #define SM501_DC_CRT_CONTROL_CP (1 << 14) 342 #define SM501_DC_CRT_CONTROL_VSP (1 << 13) 343 #define SM501_DC_CRT_CONTROL_HSP (1 << 12) 344 #define SM501_DC_CRT_CONTROL_VS (1 << 11) 345 #define SM501_DC_CRT_CONTROL_BLANK (1 << 10) 346 #define SM501_DC_CRT_CONTROL_SEL (1 << 9) 347 #define SM501_DC_CRT_CONTROL_TE (1 << 8) 348 #define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) 349 #define SM501_DC_CRT_CONTROL_GAMMA (1 << 3) 350 #define SM501_DC_CRT_CONTROL_ENABLE (1 << 2) 351 352 #define SM501_DC_CRT_CONTROL_8BPP (0 << 0) 353 #define SM501_DC_CRT_CONTROL_16BPP (1 << 0) 354 #define SM501_DC_CRT_CONTROL_32BPP (2 << 0) 355 356 #define SM501_DC_CRT_FB_ADDR (0x204) 357 #define SM501_DC_CRT_FB_OFFSET (0x208) 358 #define SM501_DC_CRT_H_TOT (0x20C) 359 #define SM501_DC_CRT_H_SYNC (0x210) 360 #define SM501_DC_CRT_V_TOT (0x214) 361 #define SM501_DC_CRT_V_SYNC (0x218) 362 #define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C) 363 #define SM501_DC_CRT_CUR_LINE (0x220) 364 #define SM501_DC_CRT_MONITOR_DETECT (0x224) 365 366 #define SM501_DC_CRT_HWC_BASE (0x230) 367 #define SM501_DC_CRT_HWC_ADDR (0x230) 368 #define SM501_DC_CRT_HWC_LOC (0x234) 369 #define SM501_DC_CRT_HWC_COLOR_1_2 (0x238) 370 #define SM501_DC_CRT_HWC_COLOR_3 (0x23C) 371 372 #define SM501_DC_PANEL_PALETTE (0x400) 373 374 #define SM501_DC_VIDEO_PALETTE (0x800) 375 376 #define SM501_DC_CRT_PALETTE (0xC00) 377 378 /* Zoom Video port base */ 379 #define SM501_ZVPORT (0x090000) 380 381 /* AC97/I2S base */ 382 #define SM501_AC97 (0x0A0000) 383 384 /* 8051 micro controller base */ 385 #define SM501_UCONTROLLER (0x0B0000) 386 387 /* 8051 micro controller SRAM base */ 388 #define SM501_UCONTROLLER_SRAM (0x0C0000) 389 390 /* DMA base */ 391 #define SM501_DMA (0x0D0000) 392 393 /* 2d engine base */ 394 #define SM501_2D_ENGINE (0x100000) 395 #define SM501_2D_SOURCE (0x00) 396 #define SM501_2D_DESTINATION (0x04) 397 #define SM501_2D_DIMENSION (0x08) 398 #define SM501_2D_CONTROL (0x0C) 399 #define SM501_2D_PITCH (0x10) 400 #define SM501_2D_FOREGROUND (0x14) 401 #define SM501_2D_BACKGROUND (0x18) 402 #define SM501_2D_STRETCH (0x1C) 403 #define SM501_2D_COLOR_COMPARE (0x20) 404 #define SM501_2D_COLOR_COMPARE_MASK (0x24) 405 #define SM501_2D_MASK (0x28) 406 #define SM501_2D_CLIP_TL (0x2C) 407 #define SM501_2D_CLIP_BR (0x30) 408 #define SM501_2D_MONO_PATTERN_LOW (0x34) 409 #define SM501_2D_MONO_PATTERN_HIGH (0x38) 410 #define SM501_2D_WINDOW_WIDTH (0x3C) 411 #define SM501_2D_SOURCE_BASE (0x40) 412 #define SM501_2D_DESTINATION_BASE (0x44) 413 #define SM501_2D_ALPHA (0x48) 414 #define SM501_2D_WRAP (0x4C) 415 #define SM501_2D_STATUS (0x50) 416 417 #define SM501_CSC_Y_SOURCE_BASE (0xC8) 418 #define SM501_CSC_CONSTANTS (0xCC) 419 #define SM501_CSC_Y_SOURCE_X (0xD0) 420 #define SM501_CSC_Y_SOURCE_Y (0xD4) 421 #define SM501_CSC_U_SOURCE_BASE (0xD8) 422 #define SM501_CSC_V_SOURCE_BASE (0xDC) 423 #define SM501_CSC_SOURCE_DIMENSION (0xE0) 424 #define SM501_CSC_SOURCE_PITCH (0xE4) 425 #define SM501_CSC_DESTINATION (0xE8) 426 #define SM501_CSC_DESTINATION_DIMENSION (0xEC) 427 #define SM501_CSC_DESTINATION_PITCH (0xF0) 428 #define SM501_CSC_SCALE_FACTOR (0xF4) 429 #define SM501_CSC_DESTINATION_BASE (0xF8) 430 #define SM501_CSC_CONTROL (0xFC) 431 432 /* 2d engine data port base */ 433 #define SM501_2D_ENGINE_DATA (0x110000) 434 435 /* end of register definitions */ 436 437 #define SM501_HWC_WIDTH (64) 438 #define SM501_HWC_HEIGHT (64) 439 440 /* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */ 441 static const uint32_t sm501_mem_local_size[] = { 442 [0] = 4 * MiB, 443 [1] = 8 * MiB, 444 [2] = 16 * MiB, 445 [3] = 32 * MiB, 446 [4] = 64 * MiB, 447 [5] = 2 * MiB, 448 }; 449 #define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index] 450 451 typedef struct SM501State { 452 /* graphic console status */ 453 QemuConsole *con; 454 455 /* status & internal resources */ 456 uint32_t local_mem_size_index; 457 uint8_t *local_mem; 458 MemoryRegion local_mem_region; 459 MemoryRegion mmio_region; 460 MemoryRegion system_config_region; 461 MemoryRegion i2c_region; 462 MemoryRegion disp_ctrl_region; 463 MemoryRegion twoD_engine_region; 464 uint32_t last_width; 465 uint32_t last_height; 466 bool do_full_update; /* perform a full update next time */ 467 I2CBus *i2c_bus; 468 469 /* mmio registers */ 470 uint32_t system_control; 471 uint32_t misc_control; 472 uint32_t gpio_31_0_control; 473 uint32_t gpio_63_32_control; 474 uint32_t dram_control; 475 uint32_t arbitration_control; 476 uint32_t irq_mask; 477 uint32_t misc_timing; 478 uint32_t power_mode_control; 479 480 uint8_t i2c_byte_count; 481 uint8_t i2c_status; 482 uint8_t i2c_addr; 483 uint8_t i2c_data[16]; 484 485 uint32_t uart0_ier; 486 uint32_t uart0_lcr; 487 uint32_t uart0_mcr; 488 uint32_t uart0_scr; 489 490 uint8_t dc_palette[DC_PALETTE_ENTRIES]; 491 492 uint32_t dc_panel_control; 493 uint32_t dc_panel_panning_control; 494 uint32_t dc_panel_fb_addr; 495 uint32_t dc_panel_fb_offset; 496 uint32_t dc_panel_fb_width; 497 uint32_t dc_panel_fb_height; 498 uint32_t dc_panel_tl_location; 499 uint32_t dc_panel_br_location; 500 uint32_t dc_panel_h_total; 501 uint32_t dc_panel_h_sync; 502 uint32_t dc_panel_v_total; 503 uint32_t dc_panel_v_sync; 504 505 uint32_t dc_panel_hwc_addr; 506 uint32_t dc_panel_hwc_location; 507 uint32_t dc_panel_hwc_color_1_2; 508 uint32_t dc_panel_hwc_color_3; 509 510 uint32_t dc_video_control; 511 512 uint32_t dc_crt_control; 513 uint32_t dc_crt_fb_addr; 514 uint32_t dc_crt_fb_offset; 515 uint32_t dc_crt_h_total; 516 uint32_t dc_crt_h_sync; 517 uint32_t dc_crt_v_total; 518 uint32_t dc_crt_v_sync; 519 520 uint32_t dc_crt_hwc_addr; 521 uint32_t dc_crt_hwc_location; 522 uint32_t dc_crt_hwc_color_1_2; 523 uint32_t dc_crt_hwc_color_3; 524 525 uint32_t twoD_source; 526 uint32_t twoD_destination; 527 uint32_t twoD_dimension; 528 uint32_t twoD_control; 529 uint32_t twoD_pitch; 530 uint32_t twoD_foreground; 531 uint32_t twoD_background; 532 uint32_t twoD_stretch; 533 uint32_t twoD_color_compare; 534 uint32_t twoD_color_compare_mask; 535 uint32_t twoD_mask; 536 uint32_t twoD_clip_tl; 537 uint32_t twoD_clip_br; 538 uint32_t twoD_mono_pattern_low; 539 uint32_t twoD_mono_pattern_high; 540 uint32_t twoD_window_width; 541 uint32_t twoD_source_base; 542 uint32_t twoD_destination_base; 543 uint32_t twoD_alpha; 544 uint32_t twoD_wrap; 545 } SM501State; 546 547 static uint32_t get_local_mem_size_index(uint32_t size) 548 { 549 uint32_t norm_size = 0; 550 int i, index = 0; 551 552 for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) { 553 uint32_t new_size = sm501_mem_local_size[i]; 554 if (new_size >= size) { 555 if (norm_size == 0 || norm_size > new_size) { 556 norm_size = new_size; 557 index = i; 558 } 559 } 560 } 561 562 return index; 563 } 564 565 static ram_addr_t get_fb_addr(SM501State *s, int crt) 566 { 567 return (crt ? s->dc_crt_fb_addr : s->dc_panel_fb_addr) & 0x3FFFFF0; 568 } 569 570 static inline int get_width(SM501State *s, int crt) 571 { 572 int width = crt ? s->dc_crt_h_total : s->dc_panel_h_total; 573 return (width & 0x00000FFF) + 1; 574 } 575 576 static inline int get_height(SM501State *s, int crt) 577 { 578 int height = crt ? s->dc_crt_v_total : s->dc_panel_v_total; 579 return (height & 0x00000FFF) + 1; 580 } 581 582 static inline int get_bpp(SM501State *s, int crt) 583 { 584 int bpp = crt ? s->dc_crt_control : s->dc_panel_control; 585 return 1 << (bpp & 3); 586 } 587 588 /** 589 * Check the availability of hardware cursor. 590 * @param crt 0 for PANEL, 1 for CRT. 591 */ 592 static inline int is_hwc_enabled(SM501State *state, int crt) 593 { 594 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 595 return addr & SM501_HWC_EN; 596 } 597 598 /** 599 * Get the address which holds cursor pattern data. 600 * @param crt 0 for PANEL, 1 for CRT. 601 */ 602 static inline uint8_t *get_hwc_address(SM501State *state, int crt) 603 { 604 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 605 return state->local_mem + (addr & 0x03FFFFF0); 606 } 607 608 /** 609 * Get the cursor position in y coordinate. 610 * @param crt 0 for PANEL, 1 for CRT. 611 */ 612 static inline uint32_t get_hwc_y(SM501State *state, int crt) 613 { 614 uint32_t location = crt ? state->dc_crt_hwc_location 615 : state->dc_panel_hwc_location; 616 return (location & 0x07FF0000) >> 16; 617 } 618 619 /** 620 * Get the cursor position in x coordinate. 621 * @param crt 0 for PANEL, 1 for CRT. 622 */ 623 static inline uint32_t get_hwc_x(SM501State *state, int crt) 624 { 625 uint32_t location = crt ? state->dc_crt_hwc_location 626 : state->dc_panel_hwc_location; 627 return location & 0x000007FF; 628 } 629 630 /** 631 * Get the hardware cursor palette. 632 * @param crt 0 for PANEL, 1 for CRT. 633 * @param palette pointer to a [3 * 3] array to store color values in 634 */ 635 static inline void get_hwc_palette(SM501State *state, int crt, uint8_t *palette) 636 { 637 int i; 638 uint32_t color_reg; 639 uint16_t rgb565; 640 641 for (i = 0; i < 3; i++) { 642 if (i + 1 == 3) { 643 color_reg = crt ? state->dc_crt_hwc_color_3 644 : state->dc_panel_hwc_color_3; 645 } else { 646 color_reg = crt ? state->dc_crt_hwc_color_1_2 647 : state->dc_panel_hwc_color_1_2; 648 } 649 650 if (i + 1 == 2) { 651 rgb565 = (color_reg >> 16) & 0xFFFF; 652 } else { 653 rgb565 = color_reg & 0xFFFF; 654 } 655 palette[i * 3 + 0] = ((rgb565 >> 11) * 527 + 23) >> 6; /* r */ 656 palette[i * 3 + 1] = (((rgb565 >> 5) & 0x3f) * 259 + 33) >> 6; /* g */ 657 palette[i * 3 + 2] = ((rgb565 & 0x1f) * 527 + 23) >> 6; /* b */ 658 } 659 } 660 661 static inline void hwc_invalidate(SM501State *s, int crt) 662 { 663 int w = get_width(s, crt); 664 int h = get_height(s, crt); 665 int bpp = get_bpp(s, crt); 666 int start = get_hwc_y(s, crt); 667 int end = MIN(h, start + SM501_HWC_HEIGHT) + 1; 668 669 start *= w * bpp; 670 end *= w * bpp; 671 672 memory_region_set_dirty(&s->local_mem_region, 673 get_fb_addr(s, crt) + start, end - start); 674 } 675 676 static void sm501_2d_operation(SM501State *s) 677 { 678 int cmd = (s->twoD_control >> 16) & 0x1F; 679 int rtl = s->twoD_control & BIT(27); 680 int format = (s->twoD_stretch >> 20) & 3; 681 int bypp = 1 << format; /* bytes per pixel */ 682 int rop_mode = (s->twoD_control >> 15) & 1; /* 1 for rop2, else rop3 */ 683 /* 1 if rop2 source is the pattern, otherwise the source is the bitmap */ 684 int rop2_source_is_pattern = (s->twoD_control >> 14) & 1; 685 int rop = s->twoD_control & 0xFF; 686 unsigned int dst_x = (s->twoD_destination >> 16) & 0x01FFF; 687 unsigned int dst_y = s->twoD_destination & 0xFFFF; 688 unsigned int width = (s->twoD_dimension >> 16) & 0x1FFF; 689 unsigned int height = s->twoD_dimension & 0xFFFF; 690 uint32_t dst_base = s->twoD_destination_base & 0x03FFFFFF; 691 unsigned int dst_pitch = (s->twoD_pitch >> 16) & 0x1FFF; 692 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 693 int fb_len = get_width(s, crt) * get_height(s, crt) * get_bpp(s, crt); 694 bool overlap = false; 695 696 if ((s->twoD_stretch >> 16) & 0xF) { 697 qemu_log_mask(LOG_UNIMP, "sm501: only XY addressing is supported.\n"); 698 return; 699 } 700 701 if (s->twoD_source_base & BIT(27) || s->twoD_destination_base & BIT(27)) { 702 qemu_log_mask(LOG_UNIMP, "sm501: only local memory is supported.\n"); 703 return; 704 } 705 706 if (!dst_pitch) { 707 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero dest pitch.\n"); 708 return; 709 } 710 711 if (!width || !height) { 712 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero size 2D op.\n"); 713 return; 714 } 715 716 if (rtl) { 717 dst_x -= width - 1; 718 dst_y -= height - 1; 719 } 720 721 if (dst_base >= get_local_mem_size(s) || 722 dst_base + (dst_x + width + (dst_y + height) * dst_pitch) * bypp >= 723 get_local_mem_size(s)) { 724 qemu_log_mask(LOG_GUEST_ERROR, "sm501: 2D op dest is outside vram.\n"); 725 return; 726 } 727 728 switch (cmd) { 729 case 0: /* BitBlt */ 730 { 731 static uint32_t tmp_buf[16384]; 732 unsigned int src_x = (s->twoD_source >> 16) & 0x01FFF; 733 unsigned int src_y = s->twoD_source & 0xFFFF; 734 uint32_t src_base = s->twoD_source_base & 0x03FFFFFF; 735 unsigned int src_pitch = s->twoD_pitch & 0x1FFF; 736 737 if (!src_pitch) { 738 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero src pitch.\n"); 739 return; 740 } 741 742 if (rtl) { 743 src_x -= width - 1; 744 src_y -= height - 1; 745 } 746 747 if (src_base >= get_local_mem_size(s) || 748 src_base + (src_x + width + (src_y + height) * src_pitch) * bypp >= 749 get_local_mem_size(s)) { 750 qemu_log_mask(LOG_GUEST_ERROR, 751 "sm501: 2D op src is outside vram.\n"); 752 return; 753 } 754 755 if ((rop_mode && rop == 0x5) || (!rop_mode && rop == 0x55)) { 756 /* Invert dest, is there a way to do this with pixman? */ 757 unsigned int x, y, i; 758 uint8_t *d = s->local_mem + dst_base; 759 760 for (y = 0; y < height; y++) { 761 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 762 for (x = 0; x < width; x++, i += bypp) { 763 stn_he_p(&d[i], bypp, ~ldn_he_p(&d[i], bypp)); 764 } 765 } 766 } else { 767 /* Do copy src for unimplemented ops, better than unpainted area */ 768 if ((rop_mode && (rop != 0xc || rop2_source_is_pattern)) || 769 (!rop_mode && rop != 0xcc)) { 770 qemu_log_mask(LOG_UNIMP, 771 "sm501: rop%d op %x%s not implemented\n", 772 (rop_mode ? 2 : 3), rop, 773 (rop2_source_is_pattern ? 774 " with pattern source" : "")); 775 } 776 /* Ignore no-op blits, some guests seem to do this */ 777 if (src_base == dst_base && src_pitch == dst_pitch && 778 src_x == dst_x && src_y == dst_y) { 779 break; 780 } 781 /* Some clients also do 1 pixel blits, avoid overhead for these */ 782 if (width == 1 && height == 1) { 783 unsigned int si = (src_x + src_y * src_pitch) * bypp; 784 unsigned int di = (dst_x + dst_y * dst_pitch) * bypp; 785 stn_he_p(&s->local_mem[dst_base + di], bypp, 786 ldn_he_p(&s->local_mem[src_base + si], bypp)); 787 break; 788 } 789 /* If reverse blit do simple check for overlaps */ 790 if (rtl && src_base == dst_base && src_pitch == dst_pitch) { 791 overlap = (src_x < dst_x + width && src_x + width > dst_x && 792 src_y < dst_y + height && src_y + height > dst_y); 793 } else if (rtl) { 794 unsigned int sb, se, db, de; 795 sb = src_base + (src_x + src_y * src_pitch) * bypp; 796 se = sb + (width + (height - 1) * src_pitch) * bypp; 797 db = dst_base + (dst_x + dst_y * dst_pitch) * bypp; 798 de = db + (width + (height - 1) * dst_pitch) * bypp; 799 overlap = (db < se && sb < de); 800 } 801 if (overlap) { 802 /* pixman can't do reverse blit: copy via temporary */ 803 int tmp_stride = DIV_ROUND_UP(width * bypp, sizeof(uint32_t)); 804 uint32_t *tmp = tmp_buf; 805 806 if (tmp_stride * sizeof(uint32_t) * height > sizeof(tmp_buf)) { 807 tmp = g_malloc(tmp_stride * sizeof(uint32_t) * height); 808 } 809 pixman_blt((uint32_t *)&s->local_mem[src_base], tmp, 810 src_pitch * bypp / sizeof(uint32_t), 811 tmp_stride, 8 * bypp, 8 * bypp, 812 src_x, src_y, 0, 0, width, height); 813 pixman_blt(tmp, (uint32_t *)&s->local_mem[dst_base], 814 tmp_stride, 815 dst_pitch * bypp / sizeof(uint32_t), 816 8 * bypp, 8 * bypp, 817 0, 0, dst_x, dst_y, width, height); 818 if (tmp != tmp_buf) { 819 g_free(tmp); 820 } 821 } else { 822 pixman_blt((uint32_t *)&s->local_mem[src_base], 823 (uint32_t *)&s->local_mem[dst_base], 824 src_pitch * bypp / sizeof(uint32_t), 825 dst_pitch * bypp / sizeof(uint32_t), 826 8 * bypp, 8 * bypp, 827 src_x, src_y, dst_x, dst_y, width, height); 828 } 829 } 830 break; 831 } 832 case 1: /* Rectangle Fill */ 833 { 834 uint32_t color = s->twoD_foreground; 835 836 if (format == 2) { 837 color = cpu_to_le32(color); 838 } else if (format == 1) { 839 color = cpu_to_le16(color); 840 } 841 842 if (width == 1 && height == 1) { 843 unsigned int i = (dst_x + dst_y * dst_pitch) * bypp; 844 stn_he_p(&s->local_mem[dst_base + i], bypp, color); 845 } else { 846 pixman_fill((uint32_t *)&s->local_mem[dst_base], 847 dst_pitch * bypp / sizeof(uint32_t), 848 8 * bypp, dst_x, dst_y, width, height, color); 849 } 850 break; 851 } 852 default: 853 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2D operation: %d\n", 854 cmd); 855 return; 856 } 857 858 if (dst_base >= get_fb_addr(s, crt) && 859 dst_base <= get_fb_addr(s, crt) + fb_len) { 860 int dst_len = MIN(fb_len, ((dst_y + height - 1) * dst_pitch + 861 dst_x + width) * bypp); 862 if (dst_len) { 863 memory_region_set_dirty(&s->local_mem_region, dst_base, dst_len); 864 } 865 } 866 } 867 868 static uint64_t sm501_system_config_read(void *opaque, hwaddr addr, 869 unsigned size) 870 { 871 SM501State *s = (SM501State *)opaque; 872 uint32_t ret = 0; 873 874 switch (addr) { 875 case SM501_SYSTEM_CONTROL: 876 ret = s->system_control; 877 break; 878 case SM501_MISC_CONTROL: 879 ret = s->misc_control; 880 break; 881 case SM501_GPIO31_0_CONTROL: 882 ret = s->gpio_31_0_control; 883 break; 884 case SM501_GPIO63_32_CONTROL: 885 ret = s->gpio_63_32_control; 886 break; 887 case SM501_DEVICEID: 888 ret = 0x050100A0; 889 break; 890 case SM501_DRAM_CONTROL: 891 ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13; 892 break; 893 case SM501_ARBTRTN_CONTROL: 894 ret = s->arbitration_control; 895 break; 896 case SM501_COMMAND_LIST_STATUS: 897 ret = 0x00180002; /* FIFOs are empty, everything idle */ 898 break; 899 case SM501_IRQ_MASK: 900 ret = s->irq_mask; 901 break; 902 case SM501_MISC_TIMING: 903 /* TODO : simulate gate control */ 904 ret = s->misc_timing; 905 break; 906 case SM501_CURRENT_GATE: 907 /* TODO : simulate gate control */ 908 ret = 0x00021807; 909 break; 910 case SM501_CURRENT_CLOCK: 911 ret = 0x2A1A0A09; 912 break; 913 case SM501_POWER_MODE_CONTROL: 914 ret = s->power_mode_control; 915 break; 916 case SM501_ENDIAN_CONTROL: 917 ret = 0; /* Only default little endian mode is supported */ 918 break; 919 920 default: 921 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 922 "register read. addr=%" HWADDR_PRIx "\n", addr); 923 } 924 trace_sm501_system_config_read(addr, ret); 925 return ret; 926 } 927 928 static void sm501_system_config_write(void *opaque, hwaddr addr, 929 uint64_t value, unsigned size) 930 { 931 SM501State *s = (SM501State *)opaque; 932 933 trace_sm501_system_config_write((uint32_t)addr, (uint32_t)value); 934 switch (addr) { 935 case SM501_SYSTEM_CONTROL: 936 s->system_control &= 0x10DB0000; 937 s->system_control |= value & 0xEF00B8F7; 938 break; 939 case SM501_MISC_CONTROL: 940 s->misc_control &= 0xEF; 941 s->misc_control |= value & 0xFF7FFF10; 942 break; 943 case SM501_GPIO31_0_CONTROL: 944 s->gpio_31_0_control = value; 945 break; 946 case SM501_GPIO63_32_CONTROL: 947 s->gpio_63_32_control = value & 0xFF80FFFF; 948 break; 949 case SM501_DRAM_CONTROL: 950 s->local_mem_size_index = (value >> 13) & 0x7; 951 /* TODO : check validity of size change */ 952 s->dram_control &= 0x80000000; 953 s->dram_control |= value & 0x7FFFFFC3; 954 break; 955 case SM501_ARBTRTN_CONTROL: 956 s->arbitration_control = value & 0x37777777; 957 break; 958 case SM501_IRQ_MASK: 959 s->irq_mask = value & 0xFFDF3F5F; 960 break; 961 case SM501_MISC_TIMING: 962 s->misc_timing = value & 0xF31F1FFF; 963 break; 964 case SM501_POWER_MODE_0_GATE: 965 case SM501_POWER_MODE_1_GATE: 966 case SM501_POWER_MODE_0_CLOCK: 967 case SM501_POWER_MODE_1_CLOCK: 968 /* TODO : simulate gate & clock control */ 969 break; 970 case SM501_POWER_MODE_CONTROL: 971 s->power_mode_control = value & 0x00000003; 972 break; 973 case SM501_ENDIAN_CONTROL: 974 if (value & 0x00000001) { 975 qemu_log_mask(LOG_UNIMP, "sm501: system config big endian mode not" 976 " implemented.\n"); 977 } 978 break; 979 980 default: 981 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 982 "register write. addr=%" HWADDR_PRIx 983 ", val=%" PRIx64 "\n", addr, value); 984 } 985 } 986 987 static const MemoryRegionOps sm501_system_config_ops = { 988 .read = sm501_system_config_read, 989 .write = sm501_system_config_write, 990 .valid = { 991 .min_access_size = 4, 992 .max_access_size = 4, 993 }, 994 .endianness = DEVICE_LITTLE_ENDIAN, 995 }; 996 997 static uint64_t sm501_i2c_read(void *opaque, hwaddr addr, unsigned size) 998 { 999 SM501State *s = (SM501State *)opaque; 1000 uint8_t ret = 0; 1001 1002 switch (addr) { 1003 case SM501_I2C_BYTE_COUNT: 1004 ret = s->i2c_byte_count; 1005 break; 1006 case SM501_I2C_STATUS: 1007 ret = s->i2c_status; 1008 break; 1009 case SM501_I2C_SLAVE_ADDRESS: 1010 ret = s->i2c_addr; 1011 break; 1012 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1013 ret = s->i2c_data[addr - SM501_I2C_DATA]; 1014 break; 1015 default: 1016 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register read." 1017 " addr=0x%" HWADDR_PRIx "\n", addr); 1018 } 1019 trace_sm501_i2c_read((uint32_t)addr, ret); 1020 return ret; 1021 } 1022 1023 static void sm501_i2c_write(void *opaque, hwaddr addr, uint64_t value, 1024 unsigned size) 1025 { 1026 SM501State *s = (SM501State *)opaque; 1027 1028 trace_sm501_i2c_write((uint32_t)addr, (uint32_t)value); 1029 switch (addr) { 1030 case SM501_I2C_BYTE_COUNT: 1031 s->i2c_byte_count = value & 0xf; 1032 break; 1033 case SM501_I2C_CONTROL: 1034 if (value & SM501_I2C_CONTROL_ENABLE) { 1035 if (value & SM501_I2C_CONTROL_START) { 1036 int res = i2c_start_transfer(s->i2c_bus, 1037 s->i2c_addr >> 1, 1038 s->i2c_addr & 1); 1039 s->i2c_status |= (res ? SM501_I2C_STATUS_ERROR : 0); 1040 if (!res) { 1041 int i; 1042 for (i = 0; i <= s->i2c_byte_count; i++) { 1043 res = i2c_send_recv(s->i2c_bus, &s->i2c_data[i], 1044 !(s->i2c_addr & 1)); 1045 if (res) { 1046 s->i2c_status |= SM501_I2C_STATUS_ERROR; 1047 return; 1048 } 1049 } 1050 if (i) { 1051 s->i2c_status = SM501_I2C_STATUS_COMPLETE; 1052 } 1053 } 1054 } else { 1055 i2c_end_transfer(s->i2c_bus); 1056 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1057 } 1058 } 1059 break; 1060 case SM501_I2C_RESET: 1061 if ((value & SM501_I2C_RESET_ERROR) == 0) { 1062 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1063 } 1064 break; 1065 case SM501_I2C_SLAVE_ADDRESS: 1066 s->i2c_addr = value & 0xff; 1067 break; 1068 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1069 s->i2c_data[addr - SM501_I2C_DATA] = value & 0xff; 1070 break; 1071 default: 1072 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register write. " 1073 "addr=0x%" HWADDR_PRIx " val=%" PRIx64 "\n", addr, value); 1074 } 1075 } 1076 1077 static const MemoryRegionOps sm501_i2c_ops = { 1078 .read = sm501_i2c_read, 1079 .write = sm501_i2c_write, 1080 .valid = { 1081 .min_access_size = 1, 1082 .max_access_size = 1, 1083 }, 1084 .impl = { 1085 .min_access_size = 1, 1086 .max_access_size = 1, 1087 }, 1088 .endianness = DEVICE_LITTLE_ENDIAN, 1089 }; 1090 1091 static uint32_t sm501_palette_read(void *opaque, hwaddr addr) 1092 { 1093 SM501State *s = (SM501State *)opaque; 1094 1095 trace_sm501_palette_read((uint32_t)addr); 1096 1097 /* TODO : consider BYTE/WORD access */ 1098 /* TODO : consider endian */ 1099 1100 assert(range_covers_byte(0, 0x400 * 3, addr)); 1101 return *(uint32_t *)&s->dc_palette[addr]; 1102 } 1103 1104 static void sm501_palette_write(void *opaque, hwaddr addr, 1105 uint32_t value) 1106 { 1107 SM501State *s = (SM501State *)opaque; 1108 1109 trace_sm501_palette_write((uint32_t)addr, value); 1110 1111 /* TODO : consider BYTE/WORD access */ 1112 /* TODO : consider endian */ 1113 1114 assert(range_covers_byte(0, 0x400 * 3, addr)); 1115 *(uint32_t *)&s->dc_palette[addr] = value; 1116 s->do_full_update = true; 1117 } 1118 1119 static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr, 1120 unsigned size) 1121 { 1122 SM501State *s = (SM501State *)opaque; 1123 uint32_t ret = 0; 1124 1125 switch (addr) { 1126 1127 case SM501_DC_PANEL_CONTROL: 1128 ret = s->dc_panel_control; 1129 break; 1130 case SM501_DC_PANEL_PANNING_CONTROL: 1131 ret = s->dc_panel_panning_control; 1132 break; 1133 case SM501_DC_PANEL_COLOR_KEY: 1134 /* Not implemented yet */ 1135 break; 1136 case SM501_DC_PANEL_FB_ADDR: 1137 ret = s->dc_panel_fb_addr; 1138 break; 1139 case SM501_DC_PANEL_FB_OFFSET: 1140 ret = s->dc_panel_fb_offset; 1141 break; 1142 case SM501_DC_PANEL_FB_WIDTH: 1143 ret = s->dc_panel_fb_width; 1144 break; 1145 case SM501_DC_PANEL_FB_HEIGHT: 1146 ret = s->dc_panel_fb_height; 1147 break; 1148 case SM501_DC_PANEL_TL_LOC: 1149 ret = s->dc_panel_tl_location; 1150 break; 1151 case SM501_DC_PANEL_BR_LOC: 1152 ret = s->dc_panel_br_location; 1153 break; 1154 1155 case SM501_DC_PANEL_H_TOT: 1156 ret = s->dc_panel_h_total; 1157 break; 1158 case SM501_DC_PANEL_H_SYNC: 1159 ret = s->dc_panel_h_sync; 1160 break; 1161 case SM501_DC_PANEL_V_TOT: 1162 ret = s->dc_panel_v_total; 1163 break; 1164 case SM501_DC_PANEL_V_SYNC: 1165 ret = s->dc_panel_v_sync; 1166 break; 1167 1168 case SM501_DC_PANEL_HWC_ADDR: 1169 ret = s->dc_panel_hwc_addr; 1170 break; 1171 case SM501_DC_PANEL_HWC_LOC: 1172 ret = s->dc_panel_hwc_location; 1173 break; 1174 case SM501_DC_PANEL_HWC_COLOR_1_2: 1175 ret = s->dc_panel_hwc_color_1_2; 1176 break; 1177 case SM501_DC_PANEL_HWC_COLOR_3: 1178 ret = s->dc_panel_hwc_color_3; 1179 break; 1180 1181 case SM501_DC_VIDEO_CONTROL: 1182 ret = s->dc_video_control; 1183 break; 1184 1185 case SM501_DC_CRT_CONTROL: 1186 ret = s->dc_crt_control; 1187 break; 1188 case SM501_DC_CRT_FB_ADDR: 1189 ret = s->dc_crt_fb_addr; 1190 break; 1191 case SM501_DC_CRT_FB_OFFSET: 1192 ret = s->dc_crt_fb_offset; 1193 break; 1194 case SM501_DC_CRT_H_TOT: 1195 ret = s->dc_crt_h_total; 1196 break; 1197 case SM501_DC_CRT_H_SYNC: 1198 ret = s->dc_crt_h_sync; 1199 break; 1200 case SM501_DC_CRT_V_TOT: 1201 ret = s->dc_crt_v_total; 1202 break; 1203 case SM501_DC_CRT_V_SYNC: 1204 ret = s->dc_crt_v_sync; 1205 break; 1206 1207 case SM501_DC_CRT_HWC_ADDR: 1208 ret = s->dc_crt_hwc_addr; 1209 break; 1210 case SM501_DC_CRT_HWC_LOC: 1211 ret = s->dc_crt_hwc_location; 1212 break; 1213 case SM501_DC_CRT_HWC_COLOR_1_2: 1214 ret = s->dc_crt_hwc_color_1_2; 1215 break; 1216 case SM501_DC_CRT_HWC_COLOR_3: 1217 ret = s->dc_crt_hwc_color_3; 1218 break; 1219 1220 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1221 ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE); 1222 break; 1223 1224 default: 1225 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1226 "read. addr=%" HWADDR_PRIx "\n", addr); 1227 } 1228 trace_sm501_disp_ctrl_read((uint32_t)addr, ret); 1229 return ret; 1230 } 1231 1232 static void sm501_disp_ctrl_write(void *opaque, hwaddr addr, 1233 uint64_t value, unsigned size) 1234 { 1235 SM501State *s = (SM501State *)opaque; 1236 1237 trace_sm501_disp_ctrl_write((uint32_t)addr, (uint32_t)value); 1238 switch (addr) { 1239 case SM501_DC_PANEL_CONTROL: 1240 s->dc_panel_control = value & 0x0FFF73FF; 1241 break; 1242 case SM501_DC_PANEL_PANNING_CONTROL: 1243 s->dc_panel_panning_control = value & 0xFF3FFF3F; 1244 break; 1245 case SM501_DC_PANEL_COLOR_KEY: 1246 /* Not implemented yet */ 1247 break; 1248 case SM501_DC_PANEL_FB_ADDR: 1249 s->dc_panel_fb_addr = value & 0x8FFFFFF0; 1250 if (value & 0x8000000) { 1251 qemu_log_mask(LOG_UNIMP, "Panel external memory not supported\n"); 1252 } 1253 s->do_full_update = true; 1254 break; 1255 case SM501_DC_PANEL_FB_OFFSET: 1256 s->dc_panel_fb_offset = value & 0x3FF03FF0; 1257 break; 1258 case SM501_DC_PANEL_FB_WIDTH: 1259 s->dc_panel_fb_width = value & 0x0FFF0FFF; 1260 break; 1261 case SM501_DC_PANEL_FB_HEIGHT: 1262 s->dc_panel_fb_height = value & 0x0FFF0FFF; 1263 break; 1264 case SM501_DC_PANEL_TL_LOC: 1265 s->dc_panel_tl_location = value & 0x07FF07FF; 1266 break; 1267 case SM501_DC_PANEL_BR_LOC: 1268 s->dc_panel_br_location = value & 0x07FF07FF; 1269 break; 1270 1271 case SM501_DC_PANEL_H_TOT: 1272 s->dc_panel_h_total = value & 0x0FFF0FFF; 1273 break; 1274 case SM501_DC_PANEL_H_SYNC: 1275 s->dc_panel_h_sync = value & 0x00FF0FFF; 1276 break; 1277 case SM501_DC_PANEL_V_TOT: 1278 s->dc_panel_v_total = value & 0x0FFF0FFF; 1279 break; 1280 case SM501_DC_PANEL_V_SYNC: 1281 s->dc_panel_v_sync = value & 0x003F0FFF; 1282 break; 1283 1284 case SM501_DC_PANEL_HWC_ADDR: 1285 value &= 0x8FFFFFF0; 1286 if (value != s->dc_panel_hwc_addr) { 1287 hwc_invalidate(s, 0); 1288 s->dc_panel_hwc_addr = value; 1289 } 1290 break; 1291 case SM501_DC_PANEL_HWC_LOC: 1292 value &= 0x0FFF0FFF; 1293 if (value != s->dc_panel_hwc_location) { 1294 hwc_invalidate(s, 0); 1295 s->dc_panel_hwc_location = value; 1296 } 1297 break; 1298 case SM501_DC_PANEL_HWC_COLOR_1_2: 1299 s->dc_panel_hwc_color_1_2 = value; 1300 break; 1301 case SM501_DC_PANEL_HWC_COLOR_3: 1302 s->dc_panel_hwc_color_3 = value & 0x0000FFFF; 1303 break; 1304 1305 case SM501_DC_VIDEO_CONTROL: 1306 s->dc_video_control = value & 0x00037FFF; 1307 break; 1308 1309 case SM501_DC_CRT_CONTROL: 1310 s->dc_crt_control = value & 0x0003FFFF; 1311 break; 1312 case SM501_DC_CRT_FB_ADDR: 1313 s->dc_crt_fb_addr = value & 0x8FFFFFF0; 1314 if (value & 0x8000000) { 1315 qemu_log_mask(LOG_UNIMP, "CRT external memory not supported\n"); 1316 } 1317 s->do_full_update = true; 1318 break; 1319 case SM501_DC_CRT_FB_OFFSET: 1320 s->dc_crt_fb_offset = value & 0x3FF03FF0; 1321 break; 1322 case SM501_DC_CRT_H_TOT: 1323 s->dc_crt_h_total = value & 0x0FFF0FFF; 1324 break; 1325 case SM501_DC_CRT_H_SYNC: 1326 s->dc_crt_h_sync = value & 0x00FF0FFF; 1327 break; 1328 case SM501_DC_CRT_V_TOT: 1329 s->dc_crt_v_total = value & 0x0FFF0FFF; 1330 break; 1331 case SM501_DC_CRT_V_SYNC: 1332 s->dc_crt_v_sync = value & 0x003F0FFF; 1333 break; 1334 1335 case SM501_DC_CRT_HWC_ADDR: 1336 value &= 0x8FFFFFF0; 1337 if (value != s->dc_crt_hwc_addr) { 1338 hwc_invalidate(s, 1); 1339 s->dc_crt_hwc_addr = value; 1340 } 1341 break; 1342 case SM501_DC_CRT_HWC_LOC: 1343 value &= 0x0FFF0FFF; 1344 if (value != s->dc_crt_hwc_location) { 1345 hwc_invalidate(s, 1); 1346 s->dc_crt_hwc_location = value; 1347 } 1348 break; 1349 case SM501_DC_CRT_HWC_COLOR_1_2: 1350 s->dc_crt_hwc_color_1_2 = value; 1351 break; 1352 case SM501_DC_CRT_HWC_COLOR_3: 1353 s->dc_crt_hwc_color_3 = value & 0x0000FFFF; 1354 break; 1355 1356 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1357 sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value); 1358 break; 1359 1360 default: 1361 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1362 "write. addr=%" HWADDR_PRIx 1363 ", val=%" PRIx64 "\n", addr, value); 1364 } 1365 } 1366 1367 static const MemoryRegionOps sm501_disp_ctrl_ops = { 1368 .read = sm501_disp_ctrl_read, 1369 .write = sm501_disp_ctrl_write, 1370 .valid = { 1371 .min_access_size = 4, 1372 .max_access_size = 4, 1373 }, 1374 .endianness = DEVICE_LITTLE_ENDIAN, 1375 }; 1376 1377 static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr, 1378 unsigned size) 1379 { 1380 SM501State *s = (SM501State *)opaque; 1381 uint32_t ret = 0; 1382 1383 switch (addr) { 1384 case SM501_2D_SOURCE: 1385 ret = s->twoD_source; 1386 break; 1387 case SM501_2D_DESTINATION: 1388 ret = s->twoD_destination; 1389 break; 1390 case SM501_2D_DIMENSION: 1391 ret = s->twoD_dimension; 1392 break; 1393 case SM501_2D_CONTROL: 1394 ret = s->twoD_control; 1395 break; 1396 case SM501_2D_PITCH: 1397 ret = s->twoD_pitch; 1398 break; 1399 case SM501_2D_FOREGROUND: 1400 ret = s->twoD_foreground; 1401 break; 1402 case SM501_2D_BACKGROUND: 1403 ret = s->twoD_background; 1404 break; 1405 case SM501_2D_STRETCH: 1406 ret = s->twoD_stretch; 1407 break; 1408 case SM501_2D_COLOR_COMPARE: 1409 ret = s->twoD_color_compare; 1410 break; 1411 case SM501_2D_COLOR_COMPARE_MASK: 1412 ret = s->twoD_color_compare_mask; 1413 break; 1414 case SM501_2D_MASK: 1415 ret = s->twoD_mask; 1416 break; 1417 case SM501_2D_CLIP_TL: 1418 ret = s->twoD_clip_tl; 1419 break; 1420 case SM501_2D_CLIP_BR: 1421 ret = s->twoD_clip_br; 1422 break; 1423 case SM501_2D_MONO_PATTERN_LOW: 1424 ret = s->twoD_mono_pattern_low; 1425 break; 1426 case SM501_2D_MONO_PATTERN_HIGH: 1427 ret = s->twoD_mono_pattern_high; 1428 break; 1429 case SM501_2D_WINDOW_WIDTH: 1430 ret = s->twoD_window_width; 1431 break; 1432 case SM501_2D_SOURCE_BASE: 1433 ret = s->twoD_source_base; 1434 break; 1435 case SM501_2D_DESTINATION_BASE: 1436 ret = s->twoD_destination_base; 1437 break; 1438 case SM501_2D_ALPHA: 1439 ret = s->twoD_alpha; 1440 break; 1441 case SM501_2D_WRAP: 1442 ret = s->twoD_wrap; 1443 break; 1444 case SM501_2D_STATUS: 1445 ret = 0; /* Should return interrupt status */ 1446 break; 1447 default: 1448 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1449 "read. addr=%" HWADDR_PRIx "\n", addr); 1450 } 1451 trace_sm501_2d_engine_read((uint32_t)addr, ret); 1452 return ret; 1453 } 1454 1455 static void sm501_2d_engine_write(void *opaque, hwaddr addr, 1456 uint64_t value, unsigned size) 1457 { 1458 SM501State *s = (SM501State *)opaque; 1459 1460 trace_sm501_2d_engine_write((uint32_t)addr, (uint32_t)value); 1461 switch (addr) { 1462 case SM501_2D_SOURCE: 1463 s->twoD_source = value; 1464 break; 1465 case SM501_2D_DESTINATION: 1466 s->twoD_destination = value; 1467 break; 1468 case SM501_2D_DIMENSION: 1469 s->twoD_dimension = value; 1470 break; 1471 case SM501_2D_CONTROL: 1472 s->twoD_control = value; 1473 1474 /* do 2d operation if start flag is set. */ 1475 if (value & 0x80000000) { 1476 sm501_2d_operation(s); 1477 s->twoD_control &= ~0x80000000; /* start flag down */ 1478 } 1479 1480 break; 1481 case SM501_2D_PITCH: 1482 s->twoD_pitch = value; 1483 break; 1484 case SM501_2D_FOREGROUND: 1485 s->twoD_foreground = value; 1486 break; 1487 case SM501_2D_BACKGROUND: 1488 s->twoD_background = value; 1489 break; 1490 case SM501_2D_STRETCH: 1491 if (((value >> 20) & 3) == 3) { 1492 value &= ~BIT(20); 1493 } 1494 s->twoD_stretch = value; 1495 break; 1496 case SM501_2D_COLOR_COMPARE: 1497 s->twoD_color_compare = value; 1498 break; 1499 case SM501_2D_COLOR_COMPARE_MASK: 1500 s->twoD_color_compare_mask = value; 1501 break; 1502 case SM501_2D_MASK: 1503 s->twoD_mask = value; 1504 break; 1505 case SM501_2D_CLIP_TL: 1506 s->twoD_clip_tl = value; 1507 break; 1508 case SM501_2D_CLIP_BR: 1509 s->twoD_clip_br = value; 1510 break; 1511 case SM501_2D_MONO_PATTERN_LOW: 1512 s->twoD_mono_pattern_low = value; 1513 break; 1514 case SM501_2D_MONO_PATTERN_HIGH: 1515 s->twoD_mono_pattern_high = value; 1516 break; 1517 case SM501_2D_WINDOW_WIDTH: 1518 s->twoD_window_width = value; 1519 break; 1520 case SM501_2D_SOURCE_BASE: 1521 s->twoD_source_base = value; 1522 break; 1523 case SM501_2D_DESTINATION_BASE: 1524 s->twoD_destination_base = value; 1525 break; 1526 case SM501_2D_ALPHA: 1527 s->twoD_alpha = value; 1528 break; 1529 case SM501_2D_WRAP: 1530 s->twoD_wrap = value; 1531 break; 1532 case SM501_2D_STATUS: 1533 /* ignored, writing 0 should clear interrupt status */ 1534 break; 1535 default: 1536 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2d engine register " 1537 "write. addr=%" HWADDR_PRIx 1538 ", val=%" PRIx64 "\n", addr, value); 1539 } 1540 } 1541 1542 static const MemoryRegionOps sm501_2d_engine_ops = { 1543 .read = sm501_2d_engine_read, 1544 .write = sm501_2d_engine_write, 1545 .valid = { 1546 .min_access_size = 4, 1547 .max_access_size = 4, 1548 }, 1549 .endianness = DEVICE_LITTLE_ENDIAN, 1550 }; 1551 1552 /* draw line functions for all console modes */ 1553 1554 typedef void draw_line_func(uint8_t *d, const uint8_t *s, 1555 int width, const uint32_t *pal); 1556 1557 typedef void draw_hwc_line_func(uint8_t *d, const uint8_t *s, 1558 int width, const uint8_t *palette, 1559 int c_x, int c_y); 1560 1561 #define DEPTH 8 1562 #include "sm501_template.h" 1563 1564 #define DEPTH 15 1565 #include "sm501_template.h" 1566 1567 #define BGR_FORMAT 1568 #define DEPTH 15 1569 #include "sm501_template.h" 1570 1571 #define DEPTH 16 1572 #include "sm501_template.h" 1573 1574 #define BGR_FORMAT 1575 #define DEPTH 16 1576 #include "sm501_template.h" 1577 1578 #define DEPTH 32 1579 #include "sm501_template.h" 1580 1581 #define BGR_FORMAT 1582 #define DEPTH 32 1583 #include "sm501_template.h" 1584 1585 static draw_line_func *draw_line8_funcs[] = { 1586 draw_line8_8, 1587 draw_line8_15, 1588 draw_line8_16, 1589 draw_line8_32, 1590 draw_line8_32bgr, 1591 draw_line8_15bgr, 1592 draw_line8_16bgr, 1593 }; 1594 1595 static draw_line_func *draw_line16_funcs[] = { 1596 draw_line16_8, 1597 draw_line16_15, 1598 draw_line16_16, 1599 draw_line16_32, 1600 draw_line16_32bgr, 1601 draw_line16_15bgr, 1602 draw_line16_16bgr, 1603 }; 1604 1605 static draw_line_func *draw_line32_funcs[] = { 1606 draw_line32_8, 1607 draw_line32_15, 1608 draw_line32_16, 1609 draw_line32_32, 1610 draw_line32_32bgr, 1611 draw_line32_15bgr, 1612 draw_line32_16bgr, 1613 }; 1614 1615 static draw_hwc_line_func *draw_hwc_line_funcs[] = { 1616 draw_hwc_line_8, 1617 draw_hwc_line_15, 1618 draw_hwc_line_16, 1619 draw_hwc_line_32, 1620 draw_hwc_line_32bgr, 1621 draw_hwc_line_15bgr, 1622 draw_hwc_line_16bgr, 1623 }; 1624 1625 static inline int get_depth_index(DisplaySurface *surface) 1626 { 1627 switch (surface_bits_per_pixel(surface)) { 1628 default: 1629 case 8: 1630 return 0; 1631 case 15: 1632 return 1; 1633 case 16: 1634 return 2; 1635 case 32: 1636 if (is_surface_bgr(surface)) { 1637 return 4; 1638 } else { 1639 return 3; 1640 } 1641 } 1642 } 1643 1644 static void sm501_update_display(void *opaque) 1645 { 1646 SM501State *s = (SM501State *)opaque; 1647 DisplaySurface *surface = qemu_console_surface(s->con); 1648 DirtyBitmapSnapshot *snap; 1649 int y, c_x = 0, c_y = 0; 1650 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 1651 int width = get_width(s, crt); 1652 int height = get_height(s, crt); 1653 int src_bpp = get_bpp(s, crt); 1654 int dst_bpp = surface_bytes_per_pixel(surface); 1655 int dst_depth_index = get_depth_index(surface); 1656 draw_line_func *draw_line = NULL; 1657 draw_hwc_line_func *draw_hwc_line = NULL; 1658 int full_update = 0; 1659 int y_start = -1; 1660 ram_addr_t offset; 1661 uint32_t *palette; 1662 uint8_t hwc_palette[3 * 3]; 1663 uint8_t *hwc_src = NULL; 1664 1665 if (!((crt ? s->dc_crt_control : s->dc_panel_control) 1666 & SM501_DC_CRT_CONTROL_ENABLE)) { 1667 return; 1668 } 1669 1670 palette = (uint32_t *)(crt ? &s->dc_palette[SM501_DC_CRT_PALETTE - 1671 SM501_DC_PANEL_PALETTE] 1672 : &s->dc_palette[0]); 1673 1674 /* choose draw_line function */ 1675 switch (src_bpp) { 1676 case 1: 1677 draw_line = draw_line8_funcs[dst_depth_index]; 1678 break; 1679 case 2: 1680 draw_line = draw_line16_funcs[dst_depth_index]; 1681 break; 1682 case 4: 1683 draw_line = draw_line32_funcs[dst_depth_index]; 1684 break; 1685 default: 1686 qemu_log_mask(LOG_GUEST_ERROR, "sm501: update display" 1687 "invalid control register value.\n"); 1688 return; 1689 } 1690 1691 /* set up to draw hardware cursor */ 1692 if (is_hwc_enabled(s, crt)) { 1693 /* choose cursor draw line function */ 1694 draw_hwc_line = draw_hwc_line_funcs[dst_depth_index]; 1695 hwc_src = get_hwc_address(s, crt); 1696 c_x = get_hwc_x(s, crt); 1697 c_y = get_hwc_y(s, crt); 1698 get_hwc_palette(s, crt, hwc_palette); 1699 } 1700 1701 /* adjust console size */ 1702 if (s->last_width != width || s->last_height != height) { 1703 qemu_console_resize(s->con, width, height); 1704 surface = qemu_console_surface(s->con); 1705 s->last_width = width; 1706 s->last_height = height; 1707 full_update = 1; 1708 } 1709 1710 /* someone else requested a full update */ 1711 if (s->do_full_update) { 1712 s->do_full_update = false; 1713 full_update = 1; 1714 } 1715 1716 /* draw each line according to conditions */ 1717 offset = get_fb_addr(s, crt); 1718 snap = memory_region_snapshot_and_clear_dirty(&s->local_mem_region, 1719 offset, width * height * src_bpp, DIRTY_MEMORY_VGA); 1720 for (y = 0; y < height; y++, offset += width * src_bpp) { 1721 int update, update_hwc; 1722 1723 /* check if hardware cursor is enabled and we're within its range */ 1724 update_hwc = draw_hwc_line && c_y <= y && y < c_y + SM501_HWC_HEIGHT; 1725 update = full_update || update_hwc; 1726 /* check dirty flags for each line */ 1727 update |= memory_region_snapshot_get_dirty(&s->local_mem_region, snap, 1728 offset, width * src_bpp); 1729 1730 /* draw line and change status */ 1731 if (update) { 1732 uint8_t *d = surface_data(surface); 1733 d += y * width * dst_bpp; 1734 1735 /* draw graphics layer */ 1736 draw_line(d, s->local_mem + offset, width, palette); 1737 1738 /* draw hardware cursor */ 1739 if (update_hwc) { 1740 draw_hwc_line(d, hwc_src, width, hwc_palette, c_x, y - c_y); 1741 } 1742 1743 if (y_start < 0) { 1744 y_start = y; 1745 } 1746 } else { 1747 if (y_start >= 0) { 1748 /* flush to display */ 1749 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1750 y_start = -1; 1751 } 1752 } 1753 } 1754 g_free(snap); 1755 1756 /* complete flush to display */ 1757 if (y_start >= 0) { 1758 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1759 } 1760 } 1761 1762 static const GraphicHwOps sm501_ops = { 1763 .gfx_update = sm501_update_display, 1764 }; 1765 1766 static void sm501_reset(SM501State *s) 1767 { 1768 s->system_control = 0x00100000; /* 2D engine FIFO empty */ 1769 /* Bits 17 (SH), 7 (CDR), 6:5 (Test), 2:0 (Bus) are all supposed 1770 * to be determined at reset by GPIO lines which set config bits. 1771 * We hardwire them: 1772 * SH = 0 : Hitachi Ready Polarity == Active Low 1773 * CDR = 0 : do not reset clock divider 1774 * TEST = 0 : Normal mode (not testing the silicon) 1775 * BUS = 0 : Hitachi SH3/SH4 1776 */ 1777 s->misc_control = SM501_MISC_DAC_POWER; 1778 s->gpio_31_0_control = 0; 1779 s->gpio_63_32_control = 0; 1780 s->dram_control = 0; 1781 s->arbitration_control = 0x05146732; 1782 s->irq_mask = 0; 1783 s->misc_timing = 0; 1784 s->power_mode_control = 0; 1785 s->i2c_byte_count = 0; 1786 s->i2c_status = 0; 1787 s->i2c_addr = 0; 1788 memset(s->i2c_data, 0, 16); 1789 s->dc_panel_control = 0x00010000; /* FIFO level 3 */ 1790 s->dc_video_control = 0; 1791 s->dc_crt_control = 0x00010000; 1792 s->twoD_source = 0; 1793 s->twoD_destination = 0; 1794 s->twoD_dimension = 0; 1795 s->twoD_control = 0; 1796 s->twoD_pitch = 0; 1797 s->twoD_foreground = 0; 1798 s->twoD_background = 0; 1799 s->twoD_stretch = 0; 1800 s->twoD_color_compare = 0; 1801 s->twoD_color_compare_mask = 0; 1802 s->twoD_mask = 0; 1803 s->twoD_clip_tl = 0; 1804 s->twoD_clip_br = 0; 1805 s->twoD_mono_pattern_low = 0; 1806 s->twoD_mono_pattern_high = 0; 1807 s->twoD_window_width = 0; 1808 s->twoD_source_base = 0; 1809 s->twoD_destination_base = 0; 1810 s->twoD_alpha = 0; 1811 s->twoD_wrap = 0; 1812 } 1813 1814 static void sm501_init(SM501State *s, DeviceState *dev, 1815 uint32_t local_mem_bytes) 1816 { 1817 s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes); 1818 1819 /* local memory */ 1820 memory_region_init_ram(&s->local_mem_region, OBJECT(dev), "sm501.local", 1821 get_local_mem_size(s), &error_fatal); 1822 memory_region_set_log(&s->local_mem_region, true, DIRTY_MEMORY_VGA); 1823 s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region); 1824 1825 /* i2c */ 1826 s->i2c_bus = i2c_init_bus(dev, "sm501.i2c"); 1827 /* ddc */ 1828 I2CDDCState *ddc = I2CDDC(qdev_new(TYPE_I2CDDC)); 1829 i2c_set_slave_address(I2C_SLAVE(ddc), 0x50); 1830 qdev_realize_and_unref(DEVICE(ddc), BUS(s->i2c_bus), &error_abort); 1831 1832 /* mmio */ 1833 memory_region_init(&s->mmio_region, OBJECT(dev), "sm501.mmio", MMIO_SIZE); 1834 memory_region_init_io(&s->system_config_region, OBJECT(dev), 1835 &sm501_system_config_ops, s, 1836 "sm501-system-config", 0x6c); 1837 memory_region_add_subregion(&s->mmio_region, SM501_SYS_CONFIG, 1838 &s->system_config_region); 1839 memory_region_init_io(&s->i2c_region, OBJECT(dev), &sm501_i2c_ops, s, 1840 "sm501-i2c", 0x14); 1841 memory_region_add_subregion(&s->mmio_region, SM501_I2C, &s->i2c_region); 1842 memory_region_init_io(&s->disp_ctrl_region, OBJECT(dev), 1843 &sm501_disp_ctrl_ops, s, 1844 "sm501-disp-ctrl", 0x1000); 1845 memory_region_add_subregion(&s->mmio_region, SM501_DC, 1846 &s->disp_ctrl_region); 1847 memory_region_init_io(&s->twoD_engine_region, OBJECT(dev), 1848 &sm501_2d_engine_ops, s, 1849 "sm501-2d-engine", 0x54); 1850 memory_region_add_subregion(&s->mmio_region, SM501_2D_ENGINE, 1851 &s->twoD_engine_region); 1852 1853 /* create qemu graphic console */ 1854 s->con = graphic_console_init(dev, 0, &sm501_ops, s); 1855 } 1856 1857 static const VMStateDescription vmstate_sm501_state = { 1858 .name = "sm501-state", 1859 .version_id = 1, 1860 .minimum_version_id = 1, 1861 .fields = (VMStateField[]) { 1862 VMSTATE_UINT32(local_mem_size_index, SM501State), 1863 VMSTATE_UINT32(system_control, SM501State), 1864 VMSTATE_UINT32(misc_control, SM501State), 1865 VMSTATE_UINT32(gpio_31_0_control, SM501State), 1866 VMSTATE_UINT32(gpio_63_32_control, SM501State), 1867 VMSTATE_UINT32(dram_control, SM501State), 1868 VMSTATE_UINT32(arbitration_control, SM501State), 1869 VMSTATE_UINT32(irq_mask, SM501State), 1870 VMSTATE_UINT32(misc_timing, SM501State), 1871 VMSTATE_UINT32(power_mode_control, SM501State), 1872 VMSTATE_UINT32(uart0_ier, SM501State), 1873 VMSTATE_UINT32(uart0_lcr, SM501State), 1874 VMSTATE_UINT32(uart0_mcr, SM501State), 1875 VMSTATE_UINT32(uart0_scr, SM501State), 1876 VMSTATE_UINT8_ARRAY(dc_palette, SM501State, DC_PALETTE_ENTRIES), 1877 VMSTATE_UINT32(dc_panel_control, SM501State), 1878 VMSTATE_UINT32(dc_panel_panning_control, SM501State), 1879 VMSTATE_UINT32(dc_panel_fb_addr, SM501State), 1880 VMSTATE_UINT32(dc_panel_fb_offset, SM501State), 1881 VMSTATE_UINT32(dc_panel_fb_width, SM501State), 1882 VMSTATE_UINT32(dc_panel_fb_height, SM501State), 1883 VMSTATE_UINT32(dc_panel_tl_location, SM501State), 1884 VMSTATE_UINT32(dc_panel_br_location, SM501State), 1885 VMSTATE_UINT32(dc_panel_h_total, SM501State), 1886 VMSTATE_UINT32(dc_panel_h_sync, SM501State), 1887 VMSTATE_UINT32(dc_panel_v_total, SM501State), 1888 VMSTATE_UINT32(dc_panel_v_sync, SM501State), 1889 VMSTATE_UINT32(dc_panel_hwc_addr, SM501State), 1890 VMSTATE_UINT32(dc_panel_hwc_location, SM501State), 1891 VMSTATE_UINT32(dc_panel_hwc_color_1_2, SM501State), 1892 VMSTATE_UINT32(dc_panel_hwc_color_3, SM501State), 1893 VMSTATE_UINT32(dc_video_control, SM501State), 1894 VMSTATE_UINT32(dc_crt_control, SM501State), 1895 VMSTATE_UINT32(dc_crt_fb_addr, SM501State), 1896 VMSTATE_UINT32(dc_crt_fb_offset, SM501State), 1897 VMSTATE_UINT32(dc_crt_h_total, SM501State), 1898 VMSTATE_UINT32(dc_crt_h_sync, SM501State), 1899 VMSTATE_UINT32(dc_crt_v_total, SM501State), 1900 VMSTATE_UINT32(dc_crt_v_sync, SM501State), 1901 VMSTATE_UINT32(dc_crt_hwc_addr, SM501State), 1902 VMSTATE_UINT32(dc_crt_hwc_location, SM501State), 1903 VMSTATE_UINT32(dc_crt_hwc_color_1_2, SM501State), 1904 VMSTATE_UINT32(dc_crt_hwc_color_3, SM501State), 1905 VMSTATE_UINT32(twoD_source, SM501State), 1906 VMSTATE_UINT32(twoD_destination, SM501State), 1907 VMSTATE_UINT32(twoD_dimension, SM501State), 1908 VMSTATE_UINT32(twoD_control, SM501State), 1909 VMSTATE_UINT32(twoD_pitch, SM501State), 1910 VMSTATE_UINT32(twoD_foreground, SM501State), 1911 VMSTATE_UINT32(twoD_background, SM501State), 1912 VMSTATE_UINT32(twoD_stretch, SM501State), 1913 VMSTATE_UINT32(twoD_color_compare, SM501State), 1914 VMSTATE_UINT32(twoD_color_compare_mask, SM501State), 1915 VMSTATE_UINT32(twoD_mask, SM501State), 1916 VMSTATE_UINT32(twoD_clip_tl, SM501State), 1917 VMSTATE_UINT32(twoD_clip_br, SM501State), 1918 VMSTATE_UINT32(twoD_mono_pattern_low, SM501State), 1919 VMSTATE_UINT32(twoD_mono_pattern_high, SM501State), 1920 VMSTATE_UINT32(twoD_window_width, SM501State), 1921 VMSTATE_UINT32(twoD_source_base, SM501State), 1922 VMSTATE_UINT32(twoD_destination_base, SM501State), 1923 VMSTATE_UINT32(twoD_alpha, SM501State), 1924 VMSTATE_UINT32(twoD_wrap, SM501State), 1925 /* Added in version 2 */ 1926 VMSTATE_UINT8(i2c_byte_count, SM501State), 1927 VMSTATE_UINT8(i2c_status, SM501State), 1928 VMSTATE_UINT8(i2c_addr, SM501State), 1929 VMSTATE_UINT8_ARRAY(i2c_data, SM501State, 16), 1930 VMSTATE_END_OF_LIST() 1931 } 1932 }; 1933 1934 #define TYPE_SYSBUS_SM501 "sysbus-sm501" 1935 OBJECT_DECLARE_SIMPLE_TYPE(SM501SysBusState, SYSBUS_SM501) 1936 1937 struct SM501SysBusState { 1938 /*< private >*/ 1939 SysBusDevice parent_obj; 1940 /*< public >*/ 1941 SM501State state; 1942 uint32_t vram_size; 1943 uint32_t base; 1944 SerialMM serial; 1945 }; 1946 1947 static void sm501_realize_sysbus(DeviceState *dev, Error **errp) 1948 { 1949 SM501SysBusState *s = SYSBUS_SM501(dev); 1950 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1951 DeviceState *usb_dev; 1952 MemoryRegion *mr; 1953 1954 sm501_init(&s->state, dev, s->vram_size); 1955 if (get_local_mem_size(&s->state) != s->vram_size) { 1956 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 1957 get_local_mem_size(&s->state)); 1958 return; 1959 } 1960 sysbus_init_mmio(sbd, &s->state.local_mem_region); 1961 sysbus_init_mmio(sbd, &s->state.mmio_region); 1962 1963 /* bridge to usb host emulation module */ 1964 usb_dev = qdev_new("sysbus-ohci"); 1965 qdev_prop_set_uint32(usb_dev, "num-ports", 2); 1966 qdev_prop_set_uint64(usb_dev, "dma-offset", s->base); 1967 sysbus_realize_and_unref(SYS_BUS_DEVICE(usb_dev), &error_fatal); 1968 memory_region_add_subregion(&s->state.mmio_region, SM501_USB_HOST, 1969 sysbus_mmio_get_region(SYS_BUS_DEVICE(usb_dev), 0)); 1970 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(usb_dev)); 1971 1972 /* bridge to serial emulation module */ 1973 sysbus_realize(SYS_BUS_DEVICE(&s->serial), &error_fatal); 1974 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->serial), 0); 1975 memory_region_add_subregion(&s->state.mmio_region, SM501_UART0, mr); 1976 /* TODO : chain irq to IRL */ 1977 } 1978 1979 static Property sm501_sysbus_properties[] = { 1980 DEFINE_PROP_UINT32("vram-size", SM501SysBusState, vram_size, 0), 1981 DEFINE_PROP_UINT32("base", SM501SysBusState, base, 0), 1982 DEFINE_PROP_END_OF_LIST(), 1983 }; 1984 1985 static void sm501_reset_sysbus(DeviceState *dev) 1986 { 1987 SM501SysBusState *s = SYSBUS_SM501(dev); 1988 sm501_reset(&s->state); 1989 } 1990 1991 static const VMStateDescription vmstate_sm501_sysbus = { 1992 .name = TYPE_SYSBUS_SM501, 1993 .version_id = 2, 1994 .minimum_version_id = 2, 1995 .fields = (VMStateField[]) { 1996 VMSTATE_STRUCT(state, SM501SysBusState, 1, 1997 vmstate_sm501_state, SM501State), 1998 VMSTATE_END_OF_LIST() 1999 } 2000 }; 2001 2002 static void sm501_sysbus_class_init(ObjectClass *klass, void *data) 2003 { 2004 DeviceClass *dc = DEVICE_CLASS(klass); 2005 2006 dc->realize = sm501_realize_sysbus; 2007 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2008 dc->desc = "SM501 Multimedia Companion"; 2009 device_class_set_props(dc, sm501_sysbus_properties); 2010 dc->reset = sm501_reset_sysbus; 2011 dc->vmsd = &vmstate_sm501_sysbus; 2012 } 2013 2014 static void sm501_sysbus_init(Object *o) 2015 { 2016 SM501SysBusState *sm501 = SYSBUS_SM501(o); 2017 SerialMM *smm = &sm501->serial; 2018 2019 object_initialize_child(o, "serial", smm, TYPE_SERIAL_MM); 2020 qdev_set_legacy_instance_id(DEVICE(smm), SM501_UART0, 2); 2021 qdev_prop_set_uint8(DEVICE(smm), "regshift", 2); 2022 qdev_prop_set_uint8(DEVICE(smm), "endianness", DEVICE_LITTLE_ENDIAN); 2023 2024 object_property_add_alias(o, "chardev", 2025 OBJECT(smm), "chardev"); 2026 } 2027 2028 static const TypeInfo sm501_sysbus_info = { 2029 .name = TYPE_SYSBUS_SM501, 2030 .parent = TYPE_SYS_BUS_DEVICE, 2031 .instance_size = sizeof(SM501SysBusState), 2032 .class_init = sm501_sysbus_class_init, 2033 .instance_init = sm501_sysbus_init, 2034 }; 2035 2036 #define TYPE_PCI_SM501 "sm501" 2037 OBJECT_DECLARE_SIMPLE_TYPE(SM501PCIState, PCI_SM501) 2038 2039 struct SM501PCIState { 2040 /*< private >*/ 2041 PCIDevice parent_obj; 2042 /*< public >*/ 2043 SM501State state; 2044 uint32_t vram_size; 2045 }; 2046 2047 static void sm501_realize_pci(PCIDevice *dev, Error **errp) 2048 { 2049 SM501PCIState *s = PCI_SM501(dev); 2050 2051 sm501_init(&s->state, DEVICE(dev), s->vram_size); 2052 if (get_local_mem_size(&s->state) != s->vram_size) { 2053 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 2054 get_local_mem_size(&s->state)); 2055 return; 2056 } 2057 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, 2058 &s->state.local_mem_region); 2059 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, 2060 &s->state.mmio_region); 2061 } 2062 2063 static Property sm501_pci_properties[] = { 2064 DEFINE_PROP_UINT32("vram-size", SM501PCIState, vram_size, 64 * MiB), 2065 DEFINE_PROP_END_OF_LIST(), 2066 }; 2067 2068 static void sm501_reset_pci(DeviceState *dev) 2069 { 2070 SM501PCIState *s = PCI_SM501(dev); 2071 sm501_reset(&s->state); 2072 /* Bits 2:0 of misc_control register is 001 for PCI */ 2073 s->state.misc_control |= 1; 2074 } 2075 2076 static const VMStateDescription vmstate_sm501_pci = { 2077 .name = TYPE_PCI_SM501, 2078 .version_id = 2, 2079 .minimum_version_id = 2, 2080 .fields = (VMStateField[]) { 2081 VMSTATE_PCI_DEVICE(parent_obj, SM501PCIState), 2082 VMSTATE_STRUCT(state, SM501PCIState, 1, 2083 vmstate_sm501_state, SM501State), 2084 VMSTATE_END_OF_LIST() 2085 } 2086 }; 2087 2088 static void sm501_pci_class_init(ObjectClass *klass, void *data) 2089 { 2090 DeviceClass *dc = DEVICE_CLASS(klass); 2091 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 2092 2093 k->realize = sm501_realize_pci; 2094 k->vendor_id = PCI_VENDOR_ID_SILICON_MOTION; 2095 k->device_id = PCI_DEVICE_ID_SM501; 2096 k->class_id = PCI_CLASS_DISPLAY_OTHER; 2097 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2098 dc->desc = "SM501 Display Controller"; 2099 device_class_set_props(dc, sm501_pci_properties); 2100 dc->reset = sm501_reset_pci; 2101 dc->hotpluggable = false; 2102 dc->vmsd = &vmstate_sm501_pci; 2103 } 2104 2105 static const TypeInfo sm501_pci_info = { 2106 .name = TYPE_PCI_SM501, 2107 .parent = TYPE_PCI_DEVICE, 2108 .instance_size = sizeof(SM501PCIState), 2109 .class_init = sm501_pci_class_init, 2110 .interfaces = (InterfaceInfo[]) { 2111 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 2112 { }, 2113 }, 2114 }; 2115 2116 static void sm501_register_types(void) 2117 { 2118 type_register_static(&sm501_sysbus_info); 2119 type_register_static(&sm501_pci_info); 2120 } 2121 2122 type_init(sm501_register_types) 2123