1 /* 2 * QEMU SM501 Device 3 * 4 * Copyright (c) 2008 Shin-ichiro KAWASAKI 5 * Copyright (c) 2016-2020 BALATON Zoltan 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "qemu/units.h" 28 #include "qapi/error.h" 29 #include "qemu/log.h" 30 #include "qemu/module.h" 31 #include "hw/usb/hcd-ohci.h" 32 #include "hw/char/serial.h" 33 #include "ui/console.h" 34 #include "hw/sysbus.h" 35 #include "migration/vmstate.h" 36 #include "hw/pci/pci_device.h" 37 #include "hw/qdev-properties.h" 38 #include "hw/i2c/i2c.h" 39 #include "hw/display/i2c-ddc.h" 40 #include "qemu/range.h" 41 #include "ui/pixel_ops.h" 42 #include "qemu/bswap.h" 43 #include "trace.h" 44 #include "qom/object.h" 45 46 #define MMIO_BASE_OFFSET 0x3e00000 47 #define MMIO_SIZE 0x200000 48 #define DC_PALETTE_ENTRIES (0x400 * 3) 49 50 /* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */ 51 52 /* System Configuration area */ 53 /* System config base */ 54 #define SM501_SYS_CONFIG 0x000000 55 56 /* config 1 */ 57 #define SM501_SYSTEM_CONTROL 0x000000 58 59 #define SM501_SYSCTRL_PANEL_TRISTATE (1 << 0) 60 #define SM501_SYSCTRL_MEM_TRISTATE (1 << 1) 61 #define SM501_SYSCTRL_CRT_TRISTATE (1 << 2) 62 63 #define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3 << 4) 64 #define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0 << 4) 65 #define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1 << 4) 66 #define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2 << 4) 67 #define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3 << 4) 68 69 #define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1 << 6) 70 #define SM501_SYSCTRL_PCI_RETRY_DISABLE (1 << 7) 71 #define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1 << 11) 72 #define SM501_SYSCTRL_PCI_BURST_READ_EN (1 << 15) 73 74 /* miscellaneous control */ 75 76 #define SM501_MISC_CONTROL 0x000004 77 78 #define SM501_MISC_BUS_SH 0x0 79 #define SM501_MISC_BUS_PCI 0x1 80 #define SM501_MISC_BUS_XSCALE 0x2 81 #define SM501_MISC_BUS_NEC 0x6 82 #define SM501_MISC_BUS_MASK 0x7 83 84 #define SM501_MISC_VR_62MB (1 << 3) 85 #define SM501_MISC_CDR_RESET (1 << 7) 86 #define SM501_MISC_USB_LB (1 << 8) 87 #define SM501_MISC_USB_SLAVE (1 << 9) 88 #define SM501_MISC_BL_1 (1 << 10) 89 #define SM501_MISC_MC (1 << 11) 90 #define SM501_MISC_DAC_POWER (1 << 12) 91 #define SM501_MISC_IRQ_INVERT (1 << 16) 92 #define SM501_MISC_SH (1 << 17) 93 94 #define SM501_MISC_HOLD_EMPTY (0 << 18) 95 #define SM501_MISC_HOLD_8 (1 << 18) 96 #define SM501_MISC_HOLD_16 (2 << 18) 97 #define SM501_MISC_HOLD_24 (3 << 18) 98 #define SM501_MISC_HOLD_32 (4 << 18) 99 #define SM501_MISC_HOLD_MASK (7 << 18) 100 101 #define SM501_MISC_FREQ_12 (1 << 24) 102 #define SM501_MISC_PNL_24BIT (1 << 25) 103 #define SM501_MISC_8051_LE (1 << 26) 104 105 106 107 #define SM501_GPIO31_0_CONTROL 0x000008 108 #define SM501_GPIO63_32_CONTROL 0x00000C 109 #define SM501_DRAM_CONTROL 0x000010 110 111 /* command list */ 112 #define SM501_ARBTRTN_CONTROL 0x000014 113 114 /* command list */ 115 #define SM501_COMMAND_LIST_STATUS 0x000024 116 117 /* interrupt debug */ 118 #define SM501_RAW_IRQ_STATUS 0x000028 119 #define SM501_RAW_IRQ_CLEAR 0x000028 120 #define SM501_IRQ_STATUS 0x00002C 121 #define SM501_IRQ_MASK 0x000030 122 #define SM501_DEBUG_CONTROL 0x000034 123 124 /* power management */ 125 #define SM501_POWERMODE_P2X_SRC (1 << 29) 126 #define SM501_POWERMODE_V2X_SRC (1 << 20) 127 #define SM501_POWERMODE_M_SRC (1 << 12) 128 #define SM501_POWERMODE_M1_SRC (1 << 4) 129 130 #define SM501_CURRENT_GATE 0x000038 131 #define SM501_CURRENT_CLOCK 0x00003C 132 #define SM501_POWER_MODE_0_GATE 0x000040 133 #define SM501_POWER_MODE_0_CLOCK 0x000044 134 #define SM501_POWER_MODE_1_GATE 0x000048 135 #define SM501_POWER_MODE_1_CLOCK 0x00004C 136 #define SM501_SLEEP_MODE_GATE 0x000050 137 #define SM501_POWER_MODE_CONTROL 0x000054 138 139 /* power gates for units within the 501 */ 140 #define SM501_GATE_HOST 0 141 #define SM501_GATE_MEMORY 1 142 #define SM501_GATE_DISPLAY 2 143 #define SM501_GATE_2D_ENGINE 3 144 #define SM501_GATE_CSC 4 145 #define SM501_GATE_ZVPORT 5 146 #define SM501_GATE_GPIO 6 147 #define SM501_GATE_UART0 7 148 #define SM501_GATE_UART1 8 149 #define SM501_GATE_SSP 10 150 #define SM501_GATE_USB_HOST 11 151 #define SM501_GATE_USB_GADGET 12 152 #define SM501_GATE_UCONTROLLER 17 153 #define SM501_GATE_AC97 18 154 155 /* panel clock */ 156 #define SM501_CLOCK_P2XCLK 24 157 /* crt clock */ 158 #define SM501_CLOCK_V2XCLK 16 159 /* main clock */ 160 #define SM501_CLOCK_MCLK 8 161 /* SDRAM controller clock */ 162 #define SM501_CLOCK_M1XCLK 0 163 164 /* config 2 */ 165 #define SM501_PCI_MASTER_BASE 0x000058 166 #define SM501_ENDIAN_CONTROL 0x00005C 167 #define SM501_DEVICEID 0x000060 168 /* 0x050100A0 */ 169 170 #define SM501_DEVICEID_SM501 0x05010000 171 #define SM501_DEVICEID_IDMASK 0xffff0000 172 #define SM501_DEVICEID_REVMASK 0x000000ff 173 174 #define SM501_PLLCLOCK_COUNT 0x000064 175 #define SM501_MISC_TIMING 0x000068 176 #define SM501_CURRENT_SDRAM_CLOCK 0x00006C 177 178 #define SM501_PROGRAMMABLE_PLL_CONTROL 0x000074 179 180 /* GPIO base */ 181 #define SM501_GPIO 0x010000 182 #define SM501_GPIO_DATA_LOW 0x00 183 #define SM501_GPIO_DATA_HIGH 0x04 184 #define SM501_GPIO_DDR_LOW 0x08 185 #define SM501_GPIO_DDR_HIGH 0x0C 186 #define SM501_GPIO_IRQ_SETUP 0x10 187 #define SM501_GPIO_IRQ_STATUS 0x14 188 #define SM501_GPIO_IRQ_RESET 0x14 189 190 /* I2C controller base */ 191 #define SM501_I2C 0x010040 192 #define SM501_I2C_BYTE_COUNT 0x00 193 #define SM501_I2C_CONTROL 0x01 194 #define SM501_I2C_STATUS 0x02 195 #define SM501_I2C_RESET 0x02 196 #define SM501_I2C_SLAVE_ADDRESS 0x03 197 #define SM501_I2C_DATA 0x04 198 199 #define SM501_I2C_CONTROL_START (1 << 2) 200 #define SM501_I2C_CONTROL_ENABLE (1 << 0) 201 202 #define SM501_I2C_STATUS_COMPLETE (1 << 3) 203 #define SM501_I2C_STATUS_ERROR (1 << 2) 204 205 #define SM501_I2C_RESET_ERROR (1 << 2) 206 207 /* SSP base */ 208 #define SM501_SSP 0x020000 209 210 /* Uart 0 base */ 211 #define SM501_UART0 0x030000 212 213 /* Uart 1 base */ 214 #define SM501_UART1 0x030020 215 216 /* USB host port base */ 217 #define SM501_USB_HOST 0x040000 218 219 /* USB slave/gadget base */ 220 #define SM501_USB_GADGET 0x060000 221 222 /* USB slave/gadget data port base */ 223 #define SM501_USB_GADGET_DATA 0x070000 224 225 /* Display controller/video engine base */ 226 #define SM501_DC 0x080000 227 228 /* common defines for the SM501 address registers */ 229 #define SM501_ADDR_FLIP (1 << 31) 230 #define SM501_ADDR_EXT (1 << 27) 231 #define SM501_ADDR_CS1 (1 << 26) 232 #define SM501_ADDR_MASK (0x3f << 26) 233 234 #define SM501_FIFO_MASK (0x3 << 16) 235 #define SM501_FIFO_1 (0x0 << 16) 236 #define SM501_FIFO_3 (0x1 << 16) 237 #define SM501_FIFO_7 (0x2 << 16) 238 #define SM501_FIFO_11 (0x3 << 16) 239 240 /* common registers for panel and the crt */ 241 #define SM501_OFF_DC_H_TOT 0x000 242 #define SM501_OFF_DC_V_TOT 0x008 243 #define SM501_OFF_DC_H_SYNC 0x004 244 #define SM501_OFF_DC_V_SYNC 0x00C 245 246 #define SM501_DC_PANEL_CONTROL 0x000 247 248 #define SM501_DC_PANEL_CONTROL_FPEN (1 << 27) 249 #define SM501_DC_PANEL_CONTROL_BIAS (1 << 26) 250 #define SM501_DC_PANEL_CONTROL_DATA (1 << 25) 251 #define SM501_DC_PANEL_CONTROL_VDD (1 << 24) 252 #define SM501_DC_PANEL_CONTROL_DP (1 << 23) 253 254 #define SM501_DC_PANEL_CONTROL_TFT_888 (0 << 21) 255 #define SM501_DC_PANEL_CONTROL_TFT_333 (1 << 21) 256 #define SM501_DC_PANEL_CONTROL_TFT_444 (2 << 21) 257 258 #define SM501_DC_PANEL_CONTROL_DE (1 << 20) 259 260 #define SM501_DC_PANEL_CONTROL_LCD_TFT (0 << 18) 261 #define SM501_DC_PANEL_CONTROL_LCD_STN8 (1 << 18) 262 #define SM501_DC_PANEL_CONTROL_LCD_STN12 (2 << 18) 263 264 #define SM501_DC_PANEL_CONTROL_CP (1 << 14) 265 #define SM501_DC_PANEL_CONTROL_VSP (1 << 13) 266 #define SM501_DC_PANEL_CONTROL_HSP (1 << 12) 267 #define SM501_DC_PANEL_CONTROL_CK (1 << 9) 268 #define SM501_DC_PANEL_CONTROL_TE (1 << 8) 269 #define SM501_DC_PANEL_CONTROL_VPD (1 << 7) 270 #define SM501_DC_PANEL_CONTROL_VP (1 << 6) 271 #define SM501_DC_PANEL_CONTROL_HPD (1 << 5) 272 #define SM501_DC_PANEL_CONTROL_HP (1 << 4) 273 #define SM501_DC_PANEL_CONTROL_GAMMA (1 << 3) 274 #define SM501_DC_PANEL_CONTROL_EN (1 << 2) 275 276 #define SM501_DC_PANEL_CONTROL_8BPP (0 << 0) 277 #define SM501_DC_PANEL_CONTROL_16BPP (1 << 0) 278 #define SM501_DC_PANEL_CONTROL_32BPP (2 << 0) 279 280 281 #define SM501_DC_PANEL_PANNING_CONTROL 0x004 282 #define SM501_DC_PANEL_COLOR_KEY 0x008 283 #define SM501_DC_PANEL_FB_ADDR 0x00C 284 #define SM501_DC_PANEL_FB_OFFSET 0x010 285 #define SM501_DC_PANEL_FB_WIDTH 0x014 286 #define SM501_DC_PANEL_FB_HEIGHT 0x018 287 #define SM501_DC_PANEL_TL_LOC 0x01C 288 #define SM501_DC_PANEL_BR_LOC 0x020 289 #define SM501_DC_PANEL_H_TOT 0x024 290 #define SM501_DC_PANEL_H_SYNC 0x028 291 #define SM501_DC_PANEL_V_TOT 0x02C 292 #define SM501_DC_PANEL_V_SYNC 0x030 293 #define SM501_DC_PANEL_CUR_LINE 0x034 294 295 #define SM501_DC_VIDEO_CONTROL 0x040 296 #define SM501_DC_VIDEO_FB0_ADDR 0x044 297 #define SM501_DC_VIDEO_FB_WIDTH 0x048 298 #define SM501_DC_VIDEO_FB0_LAST_ADDR 0x04C 299 #define SM501_DC_VIDEO_TL_LOC 0x050 300 #define SM501_DC_VIDEO_BR_LOC 0x054 301 #define SM501_DC_VIDEO_SCALE 0x058 302 #define SM501_DC_VIDEO_INIT_SCALE 0x05C 303 #define SM501_DC_VIDEO_YUV_CONSTANTS 0x060 304 #define SM501_DC_VIDEO_FB1_ADDR 0x064 305 #define SM501_DC_VIDEO_FB1_LAST_ADDR 0x068 306 307 #define SM501_DC_VIDEO_ALPHA_CONTROL 0x080 308 #define SM501_DC_VIDEO_ALPHA_FB_ADDR 0x084 309 #define SM501_DC_VIDEO_ALPHA_FB_OFFSET 0x088 310 #define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR 0x08C 311 #define SM501_DC_VIDEO_ALPHA_TL_LOC 0x090 312 #define SM501_DC_VIDEO_ALPHA_BR_LOC 0x094 313 #define SM501_DC_VIDEO_ALPHA_SCALE 0x098 314 #define SM501_DC_VIDEO_ALPHA_INIT_SCALE 0x09C 315 #define SM501_DC_VIDEO_ALPHA_CHROMA_KEY 0x0A0 316 #define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP 0x0A4 317 318 #define SM501_DC_PANEL_HWC_BASE 0x0F0 319 #define SM501_DC_PANEL_HWC_ADDR 0x0F0 320 #define SM501_DC_PANEL_HWC_LOC 0x0F4 321 #define SM501_DC_PANEL_HWC_COLOR_1_2 0x0F8 322 #define SM501_DC_PANEL_HWC_COLOR_3 0x0FC 323 324 #define SM501_HWC_EN (1 << 31) 325 326 #define SM501_OFF_HWC_ADDR 0x00 327 #define SM501_OFF_HWC_LOC 0x04 328 #define SM501_OFF_HWC_COLOR_1_2 0x08 329 #define SM501_OFF_HWC_COLOR_3 0x0C 330 331 #define SM501_DC_ALPHA_CONTROL 0x100 332 #define SM501_DC_ALPHA_FB_ADDR 0x104 333 #define SM501_DC_ALPHA_FB_OFFSET 0x108 334 #define SM501_DC_ALPHA_TL_LOC 0x10C 335 #define SM501_DC_ALPHA_BR_LOC 0x110 336 #define SM501_DC_ALPHA_CHROMA_KEY 0x114 337 #define SM501_DC_ALPHA_COLOR_LOOKUP 0x118 338 339 #define SM501_DC_CRT_CONTROL 0x200 340 341 #define SM501_DC_CRT_CONTROL_TVP (1 << 15) 342 #define SM501_DC_CRT_CONTROL_CP (1 << 14) 343 #define SM501_DC_CRT_CONTROL_VSP (1 << 13) 344 #define SM501_DC_CRT_CONTROL_HSP (1 << 12) 345 #define SM501_DC_CRT_CONTROL_VS (1 << 11) 346 #define SM501_DC_CRT_CONTROL_BLANK (1 << 10) 347 #define SM501_DC_CRT_CONTROL_SEL (1 << 9) 348 #define SM501_DC_CRT_CONTROL_TE (1 << 8) 349 #define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) 350 #define SM501_DC_CRT_CONTROL_GAMMA (1 << 3) 351 #define SM501_DC_CRT_CONTROL_ENABLE (1 << 2) 352 353 #define SM501_DC_CRT_CONTROL_8BPP (0 << 0) 354 #define SM501_DC_CRT_CONTROL_16BPP (1 << 0) 355 #define SM501_DC_CRT_CONTROL_32BPP (2 << 0) 356 357 #define SM501_DC_CRT_FB_ADDR 0x204 358 #define SM501_DC_CRT_FB_OFFSET 0x208 359 #define SM501_DC_CRT_H_TOT 0x20C 360 #define SM501_DC_CRT_H_SYNC 0x210 361 #define SM501_DC_CRT_V_TOT 0x214 362 #define SM501_DC_CRT_V_SYNC 0x218 363 #define SM501_DC_CRT_SIGNATURE_ANALYZER 0x21C 364 #define SM501_DC_CRT_CUR_LINE 0x220 365 #define SM501_DC_CRT_MONITOR_DETECT 0x224 366 367 #define SM501_DC_CRT_HWC_BASE 0x230 368 #define SM501_DC_CRT_HWC_ADDR 0x230 369 #define SM501_DC_CRT_HWC_LOC 0x234 370 #define SM501_DC_CRT_HWC_COLOR_1_2 0x238 371 #define SM501_DC_CRT_HWC_COLOR_3 0x23C 372 373 #define SM501_DC_PANEL_PALETTE 0x400 374 375 #define SM501_DC_VIDEO_PALETTE 0x800 376 377 #define SM501_DC_CRT_PALETTE 0xC00 378 379 /* Zoom Video port base */ 380 #define SM501_ZVPORT 0x090000 381 382 /* AC97/I2S base */ 383 #define SM501_AC97 0x0A0000 384 385 /* 8051 micro controller base */ 386 #define SM501_UCONTROLLER 0x0B0000 387 388 /* 8051 micro controller SRAM base */ 389 #define SM501_UCONTROLLER_SRAM 0x0C0000 390 391 /* DMA base */ 392 #define SM501_DMA 0x0D0000 393 394 /* 2d engine base */ 395 #define SM501_2D_ENGINE 0x100000 396 #define SM501_2D_SOURCE 0x00 397 #define SM501_2D_DESTINATION 0x04 398 #define SM501_2D_DIMENSION 0x08 399 #define SM501_2D_CONTROL 0x0C 400 #define SM501_2D_PITCH 0x10 401 #define SM501_2D_FOREGROUND 0x14 402 #define SM501_2D_BACKGROUND 0x18 403 #define SM501_2D_STRETCH 0x1C 404 #define SM501_2D_COLOR_COMPARE 0x20 405 #define SM501_2D_COLOR_COMPARE_MASK 0x24 406 #define SM501_2D_MASK 0x28 407 #define SM501_2D_CLIP_TL 0x2C 408 #define SM501_2D_CLIP_BR 0x30 409 #define SM501_2D_MONO_PATTERN_LOW 0x34 410 #define SM501_2D_MONO_PATTERN_HIGH 0x38 411 #define SM501_2D_WINDOW_WIDTH 0x3C 412 #define SM501_2D_SOURCE_BASE 0x40 413 #define SM501_2D_DESTINATION_BASE 0x44 414 #define SM501_2D_ALPHA 0x48 415 #define SM501_2D_WRAP 0x4C 416 #define SM501_2D_STATUS 0x50 417 418 #define SM501_CSC_Y_SOURCE_BASE 0xC8 419 #define SM501_CSC_CONSTANTS 0xCC 420 #define SM501_CSC_Y_SOURCE_X 0xD0 421 #define SM501_CSC_Y_SOURCE_Y 0xD4 422 #define SM501_CSC_U_SOURCE_BASE 0xD8 423 #define SM501_CSC_V_SOURCE_BASE 0xDC 424 #define SM501_CSC_SOURCE_DIMENSION 0xE0 425 #define SM501_CSC_SOURCE_PITCH 0xE4 426 #define SM501_CSC_DESTINATION 0xE8 427 #define SM501_CSC_DESTINATION_DIMENSION 0xEC 428 #define SM501_CSC_DESTINATION_PITCH 0xF0 429 #define SM501_CSC_SCALE_FACTOR 0xF4 430 #define SM501_CSC_DESTINATION_BASE 0xF8 431 #define SM501_CSC_CONTROL 0xFC 432 433 /* 2d engine data port base */ 434 #define SM501_2D_ENGINE_DATA 0x110000 435 436 /* end of register definitions */ 437 438 #define SM501_HWC_WIDTH 64 439 #define SM501_HWC_HEIGHT 64 440 441 #ifdef CONFIG_PIXMAN 442 #define DEFAULT_X_PIXMAN 7 443 #else 444 #define DEFAULT_X_PIXMAN 0 445 #endif 446 447 /* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */ 448 static const uint32_t sm501_mem_local_size[] = { 449 [0] = 4 * MiB, 450 [1] = 8 * MiB, 451 [2] = 16 * MiB, 452 [3] = 32 * MiB, 453 [4] = 64 * MiB, 454 [5] = 2 * MiB, 455 }; 456 #define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index] 457 458 typedef struct SM501State { 459 /* graphic console status */ 460 QemuConsole *con; 461 462 /* status & internal resources */ 463 uint32_t local_mem_size_index; 464 uint8_t *local_mem; 465 MemoryRegion local_mem_region; 466 MemoryRegion mmio_region; 467 MemoryRegion system_config_region; 468 MemoryRegion i2c_region; 469 MemoryRegion disp_ctrl_region; 470 MemoryRegion twoD_engine_region; 471 uint32_t last_width; 472 uint32_t last_height; 473 bool do_full_update; /* perform a full update next time */ 474 uint8_t use_pixman; 475 I2CBus *i2c_bus; 476 477 /* mmio registers */ 478 uint32_t system_control; 479 uint32_t misc_control; 480 uint32_t gpio_31_0_control; 481 uint32_t gpio_63_32_control; 482 uint32_t dram_control; 483 uint32_t arbitration_control; 484 uint32_t irq_mask; 485 uint32_t misc_timing; 486 uint32_t power_mode_control; 487 488 uint8_t i2c_byte_count; 489 uint8_t i2c_status; 490 uint8_t i2c_addr; 491 uint8_t i2c_data[16]; 492 493 uint32_t uart0_ier; 494 uint32_t uart0_lcr; 495 uint32_t uart0_mcr; 496 uint32_t uart0_scr; 497 498 uint8_t dc_palette[DC_PALETTE_ENTRIES]; 499 500 uint32_t dc_panel_control; 501 uint32_t dc_panel_panning_control; 502 uint32_t dc_panel_fb_addr; 503 uint32_t dc_panel_fb_offset; 504 uint32_t dc_panel_fb_width; 505 uint32_t dc_panel_fb_height; 506 uint32_t dc_panel_tl_location; 507 uint32_t dc_panel_br_location; 508 uint32_t dc_panel_h_total; 509 uint32_t dc_panel_h_sync; 510 uint32_t dc_panel_v_total; 511 uint32_t dc_panel_v_sync; 512 513 uint32_t dc_panel_hwc_addr; 514 uint32_t dc_panel_hwc_location; 515 uint32_t dc_panel_hwc_color_1_2; 516 uint32_t dc_panel_hwc_color_3; 517 518 uint32_t dc_video_control; 519 520 uint32_t dc_crt_control; 521 uint32_t dc_crt_fb_addr; 522 uint32_t dc_crt_fb_offset; 523 uint32_t dc_crt_h_total; 524 uint32_t dc_crt_h_sync; 525 uint32_t dc_crt_v_total; 526 uint32_t dc_crt_v_sync; 527 528 uint32_t dc_crt_hwc_addr; 529 uint32_t dc_crt_hwc_location; 530 uint32_t dc_crt_hwc_color_1_2; 531 uint32_t dc_crt_hwc_color_3; 532 533 uint32_t twoD_source; 534 uint32_t twoD_destination; 535 uint32_t twoD_dimension; 536 uint32_t twoD_control; 537 uint32_t twoD_pitch; 538 uint32_t twoD_foreground; 539 uint32_t twoD_background; 540 uint32_t twoD_stretch; 541 uint32_t twoD_color_compare; 542 uint32_t twoD_color_compare_mask; 543 uint32_t twoD_mask; 544 uint32_t twoD_clip_tl; 545 uint32_t twoD_clip_br; 546 uint32_t twoD_mono_pattern_low; 547 uint32_t twoD_mono_pattern_high; 548 uint32_t twoD_window_width; 549 uint32_t twoD_source_base; 550 uint32_t twoD_destination_base; 551 uint32_t twoD_alpha; 552 uint32_t twoD_wrap; 553 } SM501State; 554 555 static uint32_t get_local_mem_size_index(uint32_t size) 556 { 557 uint32_t norm_size = 0; 558 int i, index = 0; 559 560 for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) { 561 uint32_t new_size = sm501_mem_local_size[i]; 562 if (new_size >= size) { 563 if (norm_size == 0 || norm_size > new_size) { 564 norm_size = new_size; 565 index = i; 566 } 567 } 568 } 569 570 return index; 571 } 572 573 static ram_addr_t get_fb_addr(SM501State *s, int crt) 574 { 575 return (crt ? s->dc_crt_fb_addr : s->dc_panel_fb_addr) & 0x3FFFFF0; 576 } 577 578 static inline int get_width(SM501State *s, int crt) 579 { 580 int width = crt ? s->dc_crt_h_total : s->dc_panel_h_total; 581 return (width & 0x00000FFF) + 1; 582 } 583 584 static inline int get_height(SM501State *s, int crt) 585 { 586 int height = crt ? s->dc_crt_v_total : s->dc_panel_v_total; 587 return (height & 0x00000FFF) + 1; 588 } 589 590 static inline int get_bpp(SM501State *s, int crt) 591 { 592 int bpp = crt ? s->dc_crt_control : s->dc_panel_control; 593 return 1 << (bpp & 3); 594 } 595 596 /** 597 * Check the availability of hardware cursor. 598 * @param crt 0 for PANEL, 1 for CRT. 599 */ 600 static inline int is_hwc_enabled(SM501State *state, int crt) 601 { 602 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 603 return addr & SM501_HWC_EN; 604 } 605 606 /** 607 * Get the address which holds cursor pattern data. 608 * @param crt 0 for PANEL, 1 for CRT. 609 */ 610 static inline uint8_t *get_hwc_address(SM501State *state, int crt) 611 { 612 uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr; 613 return state->local_mem + (addr & 0x03FFFFF0); 614 } 615 616 /** 617 * Get the cursor position in y coordinate. 618 * @param crt 0 for PANEL, 1 for CRT. 619 */ 620 static inline uint32_t get_hwc_y(SM501State *state, int crt) 621 { 622 uint32_t location = crt ? state->dc_crt_hwc_location 623 : state->dc_panel_hwc_location; 624 return (location & 0x07FF0000) >> 16; 625 } 626 627 /** 628 * Get the cursor position in x coordinate. 629 * @param crt 0 for PANEL, 1 for CRT. 630 */ 631 static inline uint32_t get_hwc_x(SM501State *state, int crt) 632 { 633 uint32_t location = crt ? state->dc_crt_hwc_location 634 : state->dc_panel_hwc_location; 635 return location & 0x000007FF; 636 } 637 638 /** 639 * Get the hardware cursor palette. 640 * @param crt 0 for PANEL, 1 for CRT. 641 * @param palette pointer to a [3 * 3] array to store color values in 642 */ 643 static inline void get_hwc_palette(SM501State *state, int crt, uint8_t *palette) 644 { 645 int i; 646 uint32_t color_reg; 647 uint16_t rgb565; 648 649 for (i = 0; i < 3; i++) { 650 if (i + 1 == 3) { 651 color_reg = crt ? state->dc_crt_hwc_color_3 652 : state->dc_panel_hwc_color_3; 653 } else { 654 color_reg = crt ? state->dc_crt_hwc_color_1_2 655 : state->dc_panel_hwc_color_1_2; 656 } 657 658 if (i + 1 == 2) { 659 rgb565 = (color_reg >> 16) & 0xFFFF; 660 } else { 661 rgb565 = color_reg & 0xFFFF; 662 } 663 palette[i * 3 + 0] = ((rgb565 >> 11) * 527 + 23) >> 6; /* r */ 664 palette[i * 3 + 1] = (((rgb565 >> 5) & 0x3f) * 259 + 33) >> 6; /* g */ 665 palette[i * 3 + 2] = ((rgb565 & 0x1f) * 527 + 23) >> 6; /* b */ 666 } 667 } 668 669 static inline void hwc_invalidate(SM501State *s, int crt) 670 { 671 int w = get_width(s, crt); 672 int h = get_height(s, crt); 673 int bpp = get_bpp(s, crt); 674 int start = get_hwc_y(s, crt); 675 int end = MIN(h, start + SM501_HWC_HEIGHT) + 1; 676 677 start *= w * bpp; 678 end *= w * bpp; 679 680 memory_region_set_dirty(&s->local_mem_region, 681 get_fb_addr(s, crt) + start, end - start); 682 } 683 684 static void sm501_2d_operation(SM501State *s) 685 { 686 int cmd = (s->twoD_control >> 16) & 0x1F; 687 int rtl = s->twoD_control & BIT(27); 688 int format = (s->twoD_stretch >> 20) & 3; 689 int bypp = 1 << format; /* bytes per pixel */ 690 int rop_mode = (s->twoD_control >> 15) & 1; /* 1 for rop2, else rop3 */ 691 /* 1 if rop2 source is the pattern, otherwise the source is the bitmap */ 692 int rop2_source_is_pattern = (s->twoD_control >> 14) & 1; 693 int rop = s->twoD_control & 0xFF; 694 unsigned int dst_x = (s->twoD_destination >> 16) & 0x01FFF; 695 unsigned int dst_y = s->twoD_destination & 0xFFFF; 696 unsigned int width = (s->twoD_dimension >> 16) & 0x1FFF; 697 unsigned int height = s->twoD_dimension & 0xFFFF; 698 uint32_t dst_base = s->twoD_destination_base & 0x03FFFFFF; 699 unsigned int dst_pitch = (s->twoD_pitch >> 16) & 0x1FFF; 700 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 701 int fb_len = get_width(s, crt) * get_height(s, crt) * get_bpp(s, crt); 702 bool overlap = false, fallback = false; 703 704 if ((s->twoD_stretch >> 16) & 0xF) { 705 qemu_log_mask(LOG_UNIMP, "sm501: only XY addressing is supported.\n"); 706 return; 707 } 708 709 if (s->twoD_source_base & BIT(27) || s->twoD_destination_base & BIT(27)) { 710 qemu_log_mask(LOG_UNIMP, "sm501: only local memory is supported.\n"); 711 return; 712 } 713 714 if (!dst_pitch) { 715 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero dest pitch.\n"); 716 return; 717 } 718 719 if (!width || !height) { 720 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero size 2D op.\n"); 721 return; 722 } 723 724 if (rtl) { 725 dst_x -= width - 1; 726 dst_y -= height - 1; 727 } 728 729 if (dst_base >= get_local_mem_size(s) || 730 dst_base + (dst_x + width + (dst_y + height) * dst_pitch) * bypp >= 731 get_local_mem_size(s)) { 732 qemu_log_mask(LOG_GUEST_ERROR, "sm501: 2D op dest is outside vram.\n"); 733 return; 734 } 735 736 switch (cmd) { 737 case 0: /* BitBlt */ 738 { 739 unsigned int src_x = (s->twoD_source >> 16) & 0x01FFF; 740 unsigned int src_y = s->twoD_source & 0xFFFF; 741 uint32_t src_base = s->twoD_source_base & 0x03FFFFFF; 742 unsigned int src_pitch = s->twoD_pitch & 0x1FFF; 743 744 if (!src_pitch) { 745 qemu_log_mask(LOG_GUEST_ERROR, "sm501: Zero src pitch.\n"); 746 return; 747 } 748 749 if (rtl) { 750 src_x -= width - 1; 751 src_y -= height - 1; 752 } 753 754 if (src_base >= get_local_mem_size(s) || 755 src_base + (src_x + width + (src_y + height) * src_pitch) * bypp >= 756 get_local_mem_size(s)) { 757 qemu_log_mask(LOG_GUEST_ERROR, 758 "sm501: 2D op src is outside vram.\n"); 759 return; 760 } 761 762 if ((rop_mode && rop == 0x5) || (!rop_mode && rop == 0x55)) { 763 /* DSTINVERT, is there a way to do this with pixman? */ 764 unsigned int x, y, i; 765 uint8_t *d = s->local_mem + dst_base; 766 767 for (y = 0; y < height; y++) { 768 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 769 for (x = 0; x < width; x++, i += bypp) { 770 stn_he_p(&d[i], bypp, ~ldn_he_p(&d[i], bypp)); 771 } 772 } 773 } else if (!rop_mode && rop == 0x99) { 774 /* DSxn, is there a way to do this with pixman? */ 775 unsigned int x, y, i, j; 776 uint8_t *sp = s->local_mem + src_base; 777 uint8_t *d = s->local_mem + dst_base; 778 779 for (y = 0; y < height; y++) { 780 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 781 j = (src_x + (src_y + y) * src_pitch) * bypp; 782 for (x = 0; x < width; x++, i += bypp, j += bypp) { 783 stn_he_p(&d[i], bypp, 784 ~(ldn_he_p(&sp[j], bypp) ^ ldn_he_p(&d[i], bypp))); 785 } 786 } 787 } else if (!rop_mode && rop == 0xee) { 788 /* SRCPAINT, is there a way to do this with pixman? */ 789 unsigned int x, y, i, j; 790 uint8_t *sp = s->local_mem + src_base; 791 uint8_t *d = s->local_mem + dst_base; 792 793 for (y = 0; y < height; y++) { 794 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 795 j = (src_x + (src_y + y) * src_pitch) * bypp; 796 for (x = 0; x < width; x++, i += bypp, j += bypp) { 797 stn_he_p(&d[i], bypp, 798 ldn_he_p(&sp[j], bypp) | ldn_he_p(&d[i], bypp)); 799 } 800 } 801 } else { 802 /* Do copy src for unimplemented ops, better than unpainted area */ 803 if ((rop_mode && (rop != 0xc || rop2_source_is_pattern)) || 804 (!rop_mode && rop != 0xcc)) { 805 qemu_log_mask(LOG_UNIMP, 806 "sm501: rop%d op %x%s not implemented\n", 807 (rop_mode ? 2 : 3), rop, 808 (rop2_source_is_pattern ? 809 " with pattern source" : "")); 810 } 811 /* Ignore no-op blits, some guests seem to do this */ 812 if (src_base == dst_base && src_pitch == dst_pitch && 813 src_x == dst_x && src_y == dst_y) { 814 break; 815 } 816 /* Some clients also do 1 pixel blits, avoid overhead for these */ 817 if (width == 1 && height == 1) { 818 unsigned int si = (src_x + src_y * src_pitch) * bypp; 819 unsigned int di = (dst_x + dst_y * dst_pitch) * bypp; 820 stn_he_p(&s->local_mem[dst_base + di], bypp, 821 ldn_he_p(&s->local_mem[src_base + si], bypp)); 822 break; 823 } 824 /* If reverse blit do simple check for overlaps */ 825 if (rtl && src_base == dst_base && src_pitch == dst_pitch) { 826 overlap = (src_x < dst_x + width && src_x + width > dst_x && 827 src_y < dst_y + height && src_y + height > dst_y); 828 } else if (rtl) { 829 unsigned int sb, se, db, de; 830 sb = src_base + (src_x + src_y * src_pitch) * bypp; 831 se = sb + (width + (height - 1) * src_pitch) * bypp; 832 db = dst_base + (dst_x + dst_y * dst_pitch) * bypp; 833 de = db + (width + (height - 1) * dst_pitch) * bypp; 834 overlap = (db < se && sb < de); 835 } 836 #ifdef CONFIG_PIXMAN 837 if (overlap && (s->use_pixman & BIT(2))) { 838 /* pixman can't do reverse blit: copy via temporary */ 839 int tmp_stride = DIV_ROUND_UP(width * bypp, sizeof(uint32_t)); 840 static uint32_t tmp_buf[16384]; 841 uint32_t *tmp = tmp_buf; 842 843 if (tmp_stride * sizeof(uint32_t) * height > sizeof(tmp_buf)) { 844 tmp = g_malloc(tmp_stride * sizeof(uint32_t) * height); 845 } 846 fallback = !pixman_blt((uint32_t *)&s->local_mem[src_base], 847 tmp, 848 src_pitch * bypp / sizeof(uint32_t), 849 tmp_stride, 850 8 * bypp, 8 * bypp, 851 src_x, src_y, 0, 0, width, height); 852 if (!fallback) { 853 fallback = !pixman_blt(tmp, 854 (uint32_t *)&s->local_mem[dst_base], 855 tmp_stride, 856 dst_pitch * bypp / sizeof(uint32_t), 857 8 * bypp, 8 * bypp, 858 0, 0, dst_x, dst_y, width, height); 859 } 860 if (tmp != tmp_buf) { 861 g_free(tmp); 862 } 863 } else if (!overlap && (s->use_pixman & BIT(1))) { 864 fallback = !pixman_blt((uint32_t *)&s->local_mem[src_base], 865 (uint32_t *)&s->local_mem[dst_base], 866 src_pitch * bypp / sizeof(uint32_t), 867 dst_pitch * bypp / sizeof(uint32_t), 868 8 * bypp, 8 * bypp, src_x, src_y, 869 dst_x, dst_y, width, height); 870 } else 871 #endif 872 { 873 fallback = true; 874 } 875 if (fallback) { 876 uint8_t *sp = s->local_mem + src_base; 877 uint8_t *d = s->local_mem + dst_base; 878 unsigned int y, i, j; 879 for (y = 0; y < height; y++) { 880 if (overlap) { /* overlap also means rtl */ 881 i = (dst_y + height - 1 - y) * dst_pitch; 882 i = (dst_x + i) * bypp; 883 j = (src_y + height - 1 - y) * src_pitch; 884 j = (src_x + j) * bypp; 885 memmove(&d[i], &sp[j], width * bypp); 886 } else { 887 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 888 j = (src_x + (src_y + y) * src_pitch) * bypp; 889 memcpy(&d[i], &sp[j], width * bypp); 890 } 891 } 892 } 893 } 894 break; 895 } 896 case 1: /* Rectangle Fill */ 897 { 898 uint32_t color = s->twoD_foreground; 899 900 if (format == 2) { 901 color = cpu_to_le32(color); 902 } else if (format == 1) { 903 color = cpu_to_le16(color); 904 } 905 906 #ifdef CONFIG_PIXMAN 907 if (!(s->use_pixman & BIT(0)) || (width == 1 && height == 1) || 908 !pixman_fill((uint32_t *)&s->local_mem[dst_base], 909 dst_pitch * bypp / sizeof(uint32_t), 8 * bypp, 910 dst_x, dst_y, width, height, color)) 911 #endif 912 { 913 /* fallback when pixman failed or we don't want to call it */ 914 uint8_t *d = s->local_mem + dst_base; 915 unsigned int x, y, i; 916 for (y = 0; y < height; y++) { 917 i = (dst_x + (dst_y + y) * dst_pitch) * bypp; 918 for (x = 0; x < width; x++, i += bypp) { 919 stn_he_p(&d[i], bypp, color); 920 } 921 } 922 } 923 break; 924 } 925 default: 926 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2D operation: %d\n", 927 cmd); 928 return; 929 } 930 931 if (dst_base >= get_fb_addr(s, crt) && 932 dst_base <= get_fb_addr(s, crt) + fb_len) { 933 int dst_len = MIN(fb_len, ((dst_y + height - 1) * dst_pitch + 934 dst_x + width) * bypp); 935 if (dst_len) { 936 memory_region_set_dirty(&s->local_mem_region, dst_base, dst_len); 937 } 938 } 939 } 940 941 static uint64_t sm501_system_config_read(void *opaque, hwaddr addr, 942 unsigned size) 943 { 944 SM501State *s = opaque; 945 uint32_t ret = 0; 946 947 switch (addr) { 948 case SM501_SYSTEM_CONTROL: 949 ret = s->system_control; 950 break; 951 case SM501_MISC_CONTROL: 952 ret = s->misc_control; 953 break; 954 case SM501_GPIO31_0_CONTROL: 955 ret = s->gpio_31_0_control; 956 break; 957 case SM501_GPIO63_32_CONTROL: 958 ret = s->gpio_63_32_control; 959 break; 960 case SM501_DEVICEID: 961 ret = 0x050100A0; 962 break; 963 case SM501_DRAM_CONTROL: 964 ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13; 965 break; 966 case SM501_ARBTRTN_CONTROL: 967 ret = s->arbitration_control; 968 break; 969 case SM501_COMMAND_LIST_STATUS: 970 ret = 0x00180002; /* FIFOs are empty, everything idle */ 971 break; 972 case SM501_IRQ_MASK: 973 ret = s->irq_mask; 974 break; 975 case SM501_MISC_TIMING: 976 /* TODO : simulate gate control */ 977 ret = s->misc_timing; 978 break; 979 case SM501_CURRENT_GATE: 980 /* TODO : simulate gate control */ 981 ret = 0x00021807; 982 break; 983 case SM501_CURRENT_CLOCK: 984 ret = 0x2A1A0A09; 985 break; 986 case SM501_POWER_MODE_CONTROL: 987 ret = s->power_mode_control; 988 break; 989 case SM501_ENDIAN_CONTROL: 990 ret = 0; /* Only default little endian mode is supported */ 991 break; 992 993 default: 994 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 995 "register read. addr=%" HWADDR_PRIx "\n", addr); 996 } 997 trace_sm501_system_config_read(addr, ret); 998 return ret; 999 } 1000 1001 static void sm501_system_config_write(void *opaque, hwaddr addr, 1002 uint64_t value, unsigned size) 1003 { 1004 SM501State *s = opaque; 1005 1006 trace_sm501_system_config_write((uint32_t)addr, (uint32_t)value); 1007 switch (addr) { 1008 case SM501_SYSTEM_CONTROL: 1009 s->system_control &= 0x10DB0000; 1010 s->system_control |= value & 0xEF00B8F7; 1011 break; 1012 case SM501_MISC_CONTROL: 1013 s->misc_control &= 0xEF; 1014 s->misc_control |= value & 0xFF7FFF10; 1015 break; 1016 case SM501_GPIO31_0_CONTROL: 1017 s->gpio_31_0_control = value; 1018 break; 1019 case SM501_GPIO63_32_CONTROL: 1020 s->gpio_63_32_control = value & 0xFF80FFFF; 1021 break; 1022 case SM501_DRAM_CONTROL: 1023 s->local_mem_size_index = (value >> 13) & 0x7; 1024 /* TODO : check validity of size change */ 1025 s->dram_control &= 0x80000000; 1026 s->dram_control |= value & 0x7FFFFFC3; 1027 break; 1028 case SM501_ARBTRTN_CONTROL: 1029 s->arbitration_control = value & 0x37777777; 1030 break; 1031 case SM501_IRQ_MASK: 1032 s->irq_mask = value & 0xFFDF3F5F; 1033 break; 1034 case SM501_MISC_TIMING: 1035 s->misc_timing = value & 0xF31F1FFF; 1036 break; 1037 case SM501_POWER_MODE_0_GATE: 1038 case SM501_POWER_MODE_1_GATE: 1039 case SM501_POWER_MODE_0_CLOCK: 1040 case SM501_POWER_MODE_1_CLOCK: 1041 /* TODO : simulate gate & clock control */ 1042 break; 1043 case SM501_POWER_MODE_CONTROL: 1044 s->power_mode_control = value & 0x00000003; 1045 break; 1046 case SM501_ENDIAN_CONTROL: 1047 if (value & 0x00000001) { 1048 qemu_log_mask(LOG_UNIMP, "sm501: system config big endian mode not" 1049 " implemented.\n"); 1050 } 1051 break; 1052 1053 default: 1054 qemu_log_mask(LOG_UNIMP, "sm501: not implemented system config" 1055 "register write. addr=%" HWADDR_PRIx 1056 ", val=%" PRIx64 "\n", addr, value); 1057 } 1058 } 1059 1060 static const MemoryRegionOps sm501_system_config_ops = { 1061 .read = sm501_system_config_read, 1062 .write = sm501_system_config_write, 1063 .valid = { 1064 .min_access_size = 4, 1065 .max_access_size = 4, 1066 }, 1067 .endianness = DEVICE_LITTLE_ENDIAN, 1068 }; 1069 1070 static uint64_t sm501_i2c_read(void *opaque, hwaddr addr, unsigned size) 1071 { 1072 SM501State *s = opaque; 1073 uint8_t ret = 0; 1074 1075 switch (addr) { 1076 case SM501_I2C_BYTE_COUNT: 1077 ret = s->i2c_byte_count; 1078 break; 1079 case SM501_I2C_STATUS: 1080 ret = s->i2c_status; 1081 break; 1082 case SM501_I2C_SLAVE_ADDRESS: 1083 ret = s->i2c_addr; 1084 break; 1085 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1086 ret = s->i2c_data[addr - SM501_I2C_DATA]; 1087 break; 1088 default: 1089 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register read." 1090 " addr=0x%" HWADDR_PRIx "\n", addr); 1091 } 1092 trace_sm501_i2c_read((uint32_t)addr, ret); 1093 return ret; 1094 } 1095 1096 static void sm501_i2c_write(void *opaque, hwaddr addr, uint64_t value, 1097 unsigned size) 1098 { 1099 SM501State *s = opaque; 1100 1101 trace_sm501_i2c_write((uint32_t)addr, (uint32_t)value); 1102 switch (addr) { 1103 case SM501_I2C_BYTE_COUNT: 1104 s->i2c_byte_count = value & 0xf; 1105 break; 1106 case SM501_I2C_CONTROL: 1107 if (value & SM501_I2C_CONTROL_ENABLE) { 1108 if (value & SM501_I2C_CONTROL_START) { 1109 bool is_recv = s->i2c_addr & 1; 1110 int res = i2c_start_transfer(s->i2c_bus, 1111 s->i2c_addr >> 1, 1112 is_recv); 1113 if (res) { 1114 s->i2c_status |= SM501_I2C_STATUS_ERROR; 1115 } else { 1116 int i; 1117 for (i = 0; i <= s->i2c_byte_count; i++) { 1118 if (is_recv) { 1119 s->i2c_data[i] = i2c_recv(s->i2c_bus); 1120 } else if (i2c_send(s->i2c_bus, s->i2c_data[i]) < 0) { 1121 s->i2c_status |= SM501_I2C_STATUS_ERROR; 1122 return; 1123 } 1124 } 1125 if (i) { 1126 s->i2c_status = SM501_I2C_STATUS_COMPLETE; 1127 } 1128 } 1129 } else { 1130 i2c_end_transfer(s->i2c_bus); 1131 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1132 } 1133 } 1134 break; 1135 case SM501_I2C_RESET: 1136 if ((value & SM501_I2C_RESET_ERROR) == 0) { 1137 s->i2c_status &= ~SM501_I2C_STATUS_ERROR; 1138 } 1139 break; 1140 case SM501_I2C_SLAVE_ADDRESS: 1141 s->i2c_addr = value & 0xff; 1142 break; 1143 case SM501_I2C_DATA ... SM501_I2C_DATA + 15: 1144 s->i2c_data[addr - SM501_I2C_DATA] = value & 0xff; 1145 break; 1146 default: 1147 qemu_log_mask(LOG_UNIMP, "sm501 i2c : not implemented register write. " 1148 "addr=0x%" HWADDR_PRIx " val=%" PRIx64 "\n", addr, value); 1149 } 1150 } 1151 1152 static const MemoryRegionOps sm501_i2c_ops = { 1153 .read = sm501_i2c_read, 1154 .write = sm501_i2c_write, 1155 .valid = { 1156 .min_access_size = 1, 1157 .max_access_size = 1, 1158 }, 1159 .impl = { 1160 .min_access_size = 1, 1161 .max_access_size = 1, 1162 }, 1163 .endianness = DEVICE_LITTLE_ENDIAN, 1164 }; 1165 1166 static uint32_t sm501_palette_read(void *opaque, hwaddr addr) 1167 { 1168 SM501State *s = opaque; 1169 1170 trace_sm501_palette_read((uint32_t)addr); 1171 1172 /* TODO : consider BYTE/WORD access */ 1173 /* TODO : consider endian */ 1174 1175 assert(range_covers_byte(0, 0x400 * 3, addr)); 1176 return *(uint32_t *)&s->dc_palette[addr]; 1177 } 1178 1179 static void sm501_palette_write(void *opaque, hwaddr addr, 1180 uint32_t value) 1181 { 1182 SM501State *s = opaque; 1183 1184 trace_sm501_palette_write((uint32_t)addr, value); 1185 1186 /* TODO : consider BYTE/WORD access */ 1187 /* TODO : consider endian */ 1188 1189 assert(range_covers_byte(0, 0x400 * 3, addr)); 1190 *(uint32_t *)&s->dc_palette[addr] = value; 1191 s->do_full_update = true; 1192 } 1193 1194 static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr, 1195 unsigned size) 1196 { 1197 SM501State *s = opaque; 1198 uint32_t ret = 0; 1199 1200 switch (addr) { 1201 1202 case SM501_DC_PANEL_CONTROL: 1203 ret = s->dc_panel_control; 1204 break; 1205 case SM501_DC_PANEL_PANNING_CONTROL: 1206 ret = s->dc_panel_panning_control; 1207 break; 1208 case SM501_DC_PANEL_COLOR_KEY: 1209 /* Not implemented yet */ 1210 break; 1211 case SM501_DC_PANEL_FB_ADDR: 1212 ret = s->dc_panel_fb_addr; 1213 break; 1214 case SM501_DC_PANEL_FB_OFFSET: 1215 ret = s->dc_panel_fb_offset; 1216 break; 1217 case SM501_DC_PANEL_FB_WIDTH: 1218 ret = s->dc_panel_fb_width; 1219 break; 1220 case SM501_DC_PANEL_FB_HEIGHT: 1221 ret = s->dc_panel_fb_height; 1222 break; 1223 case SM501_DC_PANEL_TL_LOC: 1224 ret = s->dc_panel_tl_location; 1225 break; 1226 case SM501_DC_PANEL_BR_LOC: 1227 ret = s->dc_panel_br_location; 1228 break; 1229 1230 case SM501_DC_PANEL_H_TOT: 1231 ret = s->dc_panel_h_total; 1232 break; 1233 case SM501_DC_PANEL_H_SYNC: 1234 ret = s->dc_panel_h_sync; 1235 break; 1236 case SM501_DC_PANEL_V_TOT: 1237 ret = s->dc_panel_v_total; 1238 break; 1239 case SM501_DC_PANEL_V_SYNC: 1240 ret = s->dc_panel_v_sync; 1241 break; 1242 1243 case SM501_DC_PANEL_HWC_ADDR: 1244 ret = s->dc_panel_hwc_addr; 1245 break; 1246 case SM501_DC_PANEL_HWC_LOC: 1247 ret = s->dc_panel_hwc_location; 1248 break; 1249 case SM501_DC_PANEL_HWC_COLOR_1_2: 1250 ret = s->dc_panel_hwc_color_1_2; 1251 break; 1252 case SM501_DC_PANEL_HWC_COLOR_3: 1253 ret = s->dc_panel_hwc_color_3; 1254 break; 1255 1256 case SM501_DC_VIDEO_CONTROL: 1257 ret = s->dc_video_control; 1258 break; 1259 1260 case SM501_DC_CRT_CONTROL: 1261 ret = s->dc_crt_control; 1262 break; 1263 case SM501_DC_CRT_FB_ADDR: 1264 ret = s->dc_crt_fb_addr; 1265 break; 1266 case SM501_DC_CRT_FB_OFFSET: 1267 ret = s->dc_crt_fb_offset; 1268 break; 1269 case SM501_DC_CRT_H_TOT: 1270 ret = s->dc_crt_h_total; 1271 break; 1272 case SM501_DC_CRT_H_SYNC: 1273 ret = s->dc_crt_h_sync; 1274 break; 1275 case SM501_DC_CRT_V_TOT: 1276 ret = s->dc_crt_v_total; 1277 break; 1278 case SM501_DC_CRT_V_SYNC: 1279 ret = s->dc_crt_v_sync; 1280 break; 1281 1282 case SM501_DC_CRT_HWC_ADDR: 1283 ret = s->dc_crt_hwc_addr; 1284 break; 1285 case SM501_DC_CRT_HWC_LOC: 1286 ret = s->dc_crt_hwc_location; 1287 break; 1288 case SM501_DC_CRT_HWC_COLOR_1_2: 1289 ret = s->dc_crt_hwc_color_1_2; 1290 break; 1291 case SM501_DC_CRT_HWC_COLOR_3: 1292 ret = s->dc_crt_hwc_color_3; 1293 break; 1294 1295 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1296 ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE); 1297 break; 1298 1299 default: 1300 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1301 "read. addr=%" HWADDR_PRIx "\n", addr); 1302 } 1303 trace_sm501_disp_ctrl_read((uint32_t)addr, ret); 1304 return ret; 1305 } 1306 1307 static void sm501_disp_ctrl_write(void *opaque, hwaddr addr, 1308 uint64_t value, unsigned size) 1309 { 1310 SM501State *s = opaque; 1311 1312 trace_sm501_disp_ctrl_write((uint32_t)addr, (uint32_t)value); 1313 switch (addr) { 1314 case SM501_DC_PANEL_CONTROL: 1315 s->dc_panel_control = value & 0x0FFF73FF; 1316 break; 1317 case SM501_DC_PANEL_PANNING_CONTROL: 1318 s->dc_panel_panning_control = value & 0xFF3FFF3F; 1319 break; 1320 case SM501_DC_PANEL_COLOR_KEY: 1321 /* Not implemented yet */ 1322 break; 1323 case SM501_DC_PANEL_FB_ADDR: 1324 s->dc_panel_fb_addr = value & 0x8FFFFFF0; 1325 if (value & 0x8000000) { 1326 qemu_log_mask(LOG_UNIMP, "Panel external memory not supported\n"); 1327 } 1328 s->do_full_update = true; 1329 break; 1330 case SM501_DC_PANEL_FB_OFFSET: 1331 s->dc_panel_fb_offset = value & 0x3FF03FF0; 1332 break; 1333 case SM501_DC_PANEL_FB_WIDTH: 1334 s->dc_panel_fb_width = value & 0x0FFF0FFF; 1335 break; 1336 case SM501_DC_PANEL_FB_HEIGHT: 1337 s->dc_panel_fb_height = value & 0x0FFF0FFF; 1338 break; 1339 case SM501_DC_PANEL_TL_LOC: 1340 s->dc_panel_tl_location = value & 0x07FF07FF; 1341 break; 1342 case SM501_DC_PANEL_BR_LOC: 1343 s->dc_panel_br_location = value & 0x07FF07FF; 1344 break; 1345 1346 case SM501_DC_PANEL_H_TOT: 1347 s->dc_panel_h_total = value & 0x0FFF0FFF; 1348 break; 1349 case SM501_DC_PANEL_H_SYNC: 1350 s->dc_panel_h_sync = value & 0x00FF0FFF; 1351 break; 1352 case SM501_DC_PANEL_V_TOT: 1353 s->dc_panel_v_total = value & 0x0FFF0FFF; 1354 break; 1355 case SM501_DC_PANEL_V_SYNC: 1356 s->dc_panel_v_sync = value & 0x003F0FFF; 1357 break; 1358 1359 case SM501_DC_PANEL_HWC_ADDR: 1360 value &= 0x8FFFFFF0; 1361 if (value != s->dc_panel_hwc_addr) { 1362 hwc_invalidate(s, 0); 1363 s->dc_panel_hwc_addr = value; 1364 } 1365 break; 1366 case SM501_DC_PANEL_HWC_LOC: 1367 value &= 0x0FFF0FFF; 1368 if (value != s->dc_panel_hwc_location) { 1369 hwc_invalidate(s, 0); 1370 s->dc_panel_hwc_location = value; 1371 } 1372 break; 1373 case SM501_DC_PANEL_HWC_COLOR_1_2: 1374 s->dc_panel_hwc_color_1_2 = value; 1375 break; 1376 case SM501_DC_PANEL_HWC_COLOR_3: 1377 s->dc_panel_hwc_color_3 = value & 0x0000FFFF; 1378 break; 1379 1380 case SM501_DC_VIDEO_CONTROL: 1381 s->dc_video_control = value & 0x00037FFF; 1382 break; 1383 1384 case SM501_DC_CRT_CONTROL: 1385 s->dc_crt_control = value & 0x0003FFFF; 1386 break; 1387 case SM501_DC_CRT_FB_ADDR: 1388 s->dc_crt_fb_addr = value & 0x8FFFFFF0; 1389 if (value & 0x8000000) { 1390 qemu_log_mask(LOG_UNIMP, "CRT external memory not supported\n"); 1391 } 1392 s->do_full_update = true; 1393 break; 1394 case SM501_DC_CRT_FB_OFFSET: 1395 s->dc_crt_fb_offset = value & 0x3FF03FF0; 1396 break; 1397 case SM501_DC_CRT_H_TOT: 1398 s->dc_crt_h_total = value & 0x0FFF0FFF; 1399 break; 1400 case SM501_DC_CRT_H_SYNC: 1401 s->dc_crt_h_sync = value & 0x00FF0FFF; 1402 break; 1403 case SM501_DC_CRT_V_TOT: 1404 s->dc_crt_v_total = value & 0x0FFF0FFF; 1405 break; 1406 case SM501_DC_CRT_V_SYNC: 1407 s->dc_crt_v_sync = value & 0x003F0FFF; 1408 break; 1409 1410 case SM501_DC_CRT_HWC_ADDR: 1411 value &= 0x8FFFFFF0; 1412 if (value != s->dc_crt_hwc_addr) { 1413 hwc_invalidate(s, 1); 1414 s->dc_crt_hwc_addr = value; 1415 } 1416 break; 1417 case SM501_DC_CRT_HWC_LOC: 1418 value &= 0x0FFF0FFF; 1419 if (value != s->dc_crt_hwc_location) { 1420 hwc_invalidate(s, 1); 1421 s->dc_crt_hwc_location = value; 1422 } 1423 break; 1424 case SM501_DC_CRT_HWC_COLOR_1_2: 1425 s->dc_crt_hwc_color_1_2 = value; 1426 break; 1427 case SM501_DC_CRT_HWC_COLOR_3: 1428 s->dc_crt_hwc_color_3 = value & 0x0000FFFF; 1429 break; 1430 1431 case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400 * 3 - 4: 1432 sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value); 1433 break; 1434 1435 default: 1436 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1437 "write. addr=%" HWADDR_PRIx 1438 ", val=%" PRIx64 "\n", addr, value); 1439 } 1440 } 1441 1442 static const MemoryRegionOps sm501_disp_ctrl_ops = { 1443 .read = sm501_disp_ctrl_read, 1444 .write = sm501_disp_ctrl_write, 1445 .valid = { 1446 .min_access_size = 4, 1447 .max_access_size = 4, 1448 }, 1449 .endianness = DEVICE_LITTLE_ENDIAN, 1450 }; 1451 1452 static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr, 1453 unsigned size) 1454 { 1455 SM501State *s = opaque; 1456 uint32_t ret = 0; 1457 1458 switch (addr) { 1459 case SM501_2D_SOURCE: 1460 ret = s->twoD_source; 1461 break; 1462 case SM501_2D_DESTINATION: 1463 ret = s->twoD_destination; 1464 break; 1465 case SM501_2D_DIMENSION: 1466 ret = s->twoD_dimension; 1467 break; 1468 case SM501_2D_CONTROL: 1469 ret = s->twoD_control; 1470 break; 1471 case SM501_2D_PITCH: 1472 ret = s->twoD_pitch; 1473 break; 1474 case SM501_2D_FOREGROUND: 1475 ret = s->twoD_foreground; 1476 break; 1477 case SM501_2D_BACKGROUND: 1478 ret = s->twoD_background; 1479 break; 1480 case SM501_2D_STRETCH: 1481 ret = s->twoD_stretch; 1482 break; 1483 case SM501_2D_COLOR_COMPARE: 1484 ret = s->twoD_color_compare; 1485 break; 1486 case SM501_2D_COLOR_COMPARE_MASK: 1487 ret = s->twoD_color_compare_mask; 1488 break; 1489 case SM501_2D_MASK: 1490 ret = s->twoD_mask; 1491 break; 1492 case SM501_2D_CLIP_TL: 1493 ret = s->twoD_clip_tl; 1494 break; 1495 case SM501_2D_CLIP_BR: 1496 ret = s->twoD_clip_br; 1497 break; 1498 case SM501_2D_MONO_PATTERN_LOW: 1499 ret = s->twoD_mono_pattern_low; 1500 break; 1501 case SM501_2D_MONO_PATTERN_HIGH: 1502 ret = s->twoD_mono_pattern_high; 1503 break; 1504 case SM501_2D_WINDOW_WIDTH: 1505 ret = s->twoD_window_width; 1506 break; 1507 case SM501_2D_SOURCE_BASE: 1508 ret = s->twoD_source_base; 1509 break; 1510 case SM501_2D_DESTINATION_BASE: 1511 ret = s->twoD_destination_base; 1512 break; 1513 case SM501_2D_ALPHA: 1514 ret = s->twoD_alpha; 1515 break; 1516 case SM501_2D_WRAP: 1517 ret = s->twoD_wrap; 1518 break; 1519 case SM501_2D_STATUS: 1520 ret = 0; /* Should return interrupt status */ 1521 break; 1522 default: 1523 qemu_log_mask(LOG_UNIMP, "sm501: not implemented disp ctrl register " 1524 "read. addr=%" HWADDR_PRIx "\n", addr); 1525 } 1526 trace_sm501_2d_engine_read((uint32_t)addr, ret); 1527 return ret; 1528 } 1529 1530 static void sm501_2d_engine_write(void *opaque, hwaddr addr, 1531 uint64_t value, unsigned size) 1532 { 1533 SM501State *s = opaque; 1534 1535 trace_sm501_2d_engine_write((uint32_t)addr, (uint32_t)value); 1536 switch (addr) { 1537 case SM501_2D_SOURCE: 1538 s->twoD_source = value; 1539 break; 1540 case SM501_2D_DESTINATION: 1541 s->twoD_destination = value; 1542 break; 1543 case SM501_2D_DIMENSION: 1544 s->twoD_dimension = value; 1545 break; 1546 case SM501_2D_CONTROL: 1547 s->twoD_control = value; 1548 1549 /* do 2d operation if start flag is set. */ 1550 if (value & 0x80000000) { 1551 sm501_2d_operation(s); 1552 s->twoD_control &= ~0x80000000; /* start flag down */ 1553 } 1554 1555 break; 1556 case SM501_2D_PITCH: 1557 s->twoD_pitch = value; 1558 break; 1559 case SM501_2D_FOREGROUND: 1560 s->twoD_foreground = value; 1561 break; 1562 case SM501_2D_BACKGROUND: 1563 s->twoD_background = value; 1564 break; 1565 case SM501_2D_STRETCH: 1566 if (((value >> 20) & 3) == 3) { 1567 value &= ~BIT(20); 1568 } 1569 s->twoD_stretch = value; 1570 break; 1571 case SM501_2D_COLOR_COMPARE: 1572 s->twoD_color_compare = value; 1573 break; 1574 case SM501_2D_COLOR_COMPARE_MASK: 1575 s->twoD_color_compare_mask = value; 1576 break; 1577 case SM501_2D_MASK: 1578 s->twoD_mask = value; 1579 break; 1580 case SM501_2D_CLIP_TL: 1581 s->twoD_clip_tl = value; 1582 break; 1583 case SM501_2D_CLIP_BR: 1584 s->twoD_clip_br = value; 1585 break; 1586 case SM501_2D_MONO_PATTERN_LOW: 1587 s->twoD_mono_pattern_low = value; 1588 break; 1589 case SM501_2D_MONO_PATTERN_HIGH: 1590 s->twoD_mono_pattern_high = value; 1591 break; 1592 case SM501_2D_WINDOW_WIDTH: 1593 s->twoD_window_width = value; 1594 break; 1595 case SM501_2D_SOURCE_BASE: 1596 s->twoD_source_base = value; 1597 break; 1598 case SM501_2D_DESTINATION_BASE: 1599 s->twoD_destination_base = value; 1600 break; 1601 case SM501_2D_ALPHA: 1602 s->twoD_alpha = value; 1603 break; 1604 case SM501_2D_WRAP: 1605 s->twoD_wrap = value; 1606 break; 1607 case SM501_2D_STATUS: 1608 /* ignored, writing 0 should clear interrupt status */ 1609 break; 1610 default: 1611 qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2d engine register " 1612 "write. addr=%" HWADDR_PRIx 1613 ", val=%" PRIx64 "\n", addr, value); 1614 } 1615 } 1616 1617 static const MemoryRegionOps sm501_2d_engine_ops = { 1618 .read = sm501_2d_engine_read, 1619 .write = sm501_2d_engine_write, 1620 .valid = { 1621 .min_access_size = 4, 1622 .max_access_size = 4, 1623 }, 1624 .endianness = DEVICE_LITTLE_ENDIAN, 1625 }; 1626 1627 /* draw line functions for all console modes */ 1628 1629 typedef void draw_line_func(uint8_t *d, const uint8_t *s, 1630 int width, const uint32_t *pal); 1631 1632 typedef void draw_hwc_line_func(uint8_t *d, const uint8_t *s, 1633 int width, const uint8_t *palette, 1634 int c_x, int c_y); 1635 1636 static void draw_line8_32(uint8_t *d, const uint8_t *s, int width, 1637 const uint32_t *pal) 1638 { 1639 uint8_t v, r, g, b; 1640 do { 1641 v = ldub_p(s); 1642 r = (pal[v] >> 16) & 0xff; 1643 g = (pal[v] >> 8) & 0xff; 1644 b = (pal[v] >> 0) & 0xff; 1645 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1646 s++; 1647 d += 4; 1648 } while (--width != 0); 1649 } 1650 1651 static void draw_line16_32(uint8_t *d, const uint8_t *s, int width, 1652 const uint32_t *pal) 1653 { 1654 uint16_t rgb565; 1655 uint8_t r, g, b; 1656 1657 do { 1658 rgb565 = lduw_le_p(s); 1659 r = (rgb565 >> 8) & 0xf8; 1660 g = (rgb565 >> 3) & 0xfc; 1661 b = (rgb565 << 3) & 0xf8; 1662 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1663 s += 2; 1664 d += 4; 1665 } while (--width != 0); 1666 } 1667 1668 static void draw_line32_32(uint8_t *d, const uint8_t *s, int width, 1669 const uint32_t *pal) 1670 { 1671 uint8_t r, g, b; 1672 1673 do { 1674 r = s[2]; 1675 g = s[1]; 1676 b = s[0]; 1677 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1678 s += 4; 1679 d += 4; 1680 } while (--width != 0); 1681 } 1682 1683 /** 1684 * Draw hardware cursor image on the given line. 1685 */ 1686 static void draw_hwc_line_32(uint8_t *d, const uint8_t *s, int width, 1687 const uint8_t *palette, int c_x, int c_y) 1688 { 1689 int i; 1690 uint8_t r, g, b, v, bitset = 0; 1691 1692 /* get cursor position */ 1693 assert(0 <= c_y && c_y < SM501_HWC_HEIGHT); 1694 s += SM501_HWC_WIDTH * c_y / 4; /* 4 pixels per byte */ 1695 d += c_x * 4; 1696 1697 for (i = 0; i < SM501_HWC_WIDTH && c_x + i < width; i++) { 1698 /* get pixel value */ 1699 if (i % 4 == 0) { 1700 bitset = ldub_p(s); 1701 s++; 1702 } 1703 v = bitset & 3; 1704 bitset >>= 2; 1705 1706 /* write pixel */ 1707 if (v) { 1708 v--; 1709 r = palette[v * 3 + 0]; 1710 g = palette[v * 3 + 1]; 1711 b = palette[v * 3 + 2]; 1712 *(uint32_t *)d = rgb_to_pixel32(r, g, b); 1713 } 1714 d += 4; 1715 } 1716 } 1717 1718 static void sm501_update_display(void *opaque) 1719 { 1720 SM501State *s = opaque; 1721 DisplaySurface *surface = qemu_console_surface(s->con); 1722 DirtyBitmapSnapshot *snap; 1723 int y, c_x = 0, c_y = 0; 1724 int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0; 1725 int width = get_width(s, crt); 1726 int height = get_height(s, crt); 1727 int src_bpp = get_bpp(s, crt); 1728 int dst_bpp = surface_bytes_per_pixel(surface); 1729 draw_line_func *draw_line = NULL; 1730 draw_hwc_line_func *draw_hwc_line = NULL; 1731 int full_update = 0; 1732 int y_start = -1; 1733 ram_addr_t offset; 1734 uint32_t *palette; 1735 uint8_t hwc_palette[3 * 3]; 1736 uint8_t *hwc_src = NULL; 1737 1738 assert(dst_bpp == 4); /* Output is always 32-bit RGB */ 1739 1740 if (!((crt ? s->dc_crt_control : s->dc_panel_control) 1741 & SM501_DC_CRT_CONTROL_ENABLE)) { 1742 return; 1743 } 1744 1745 palette = (uint32_t *)(crt ? &s->dc_palette[SM501_DC_CRT_PALETTE - 1746 SM501_DC_PANEL_PALETTE] 1747 : &s->dc_palette[0]); 1748 1749 /* choose draw_line function */ 1750 switch (src_bpp) { 1751 case 1: 1752 draw_line = draw_line8_32; 1753 break; 1754 case 2: 1755 draw_line = draw_line16_32; 1756 break; 1757 case 4: 1758 draw_line = draw_line32_32; 1759 break; 1760 default: 1761 qemu_log_mask(LOG_GUEST_ERROR, "sm501: update display" 1762 "invalid control register value.\n"); 1763 return; 1764 } 1765 1766 /* set up to draw hardware cursor */ 1767 if (is_hwc_enabled(s, crt)) { 1768 /* choose cursor draw line function */ 1769 draw_hwc_line = draw_hwc_line_32; 1770 hwc_src = get_hwc_address(s, crt); 1771 c_x = get_hwc_x(s, crt); 1772 c_y = get_hwc_y(s, crt); 1773 get_hwc_palette(s, crt, hwc_palette); 1774 } 1775 1776 /* adjust console size */ 1777 if (s->last_width != width || s->last_height != height) { 1778 qemu_console_resize(s->con, width, height); 1779 surface = qemu_console_surface(s->con); 1780 s->last_width = width; 1781 s->last_height = height; 1782 full_update = 1; 1783 } 1784 1785 /* someone else requested a full update */ 1786 if (s->do_full_update) { 1787 s->do_full_update = false; 1788 full_update = 1; 1789 } 1790 1791 /* draw each line according to conditions */ 1792 offset = get_fb_addr(s, crt); 1793 snap = memory_region_snapshot_and_clear_dirty(&s->local_mem_region, 1794 offset, width * height * src_bpp, DIRTY_MEMORY_VGA); 1795 for (y = 0; y < height; y++, offset += width * src_bpp) { 1796 int update, update_hwc; 1797 1798 /* check if hardware cursor is enabled and we're within its range */ 1799 update_hwc = draw_hwc_line && c_y <= y && y < c_y + SM501_HWC_HEIGHT; 1800 update = full_update || update_hwc; 1801 /* check dirty flags for each line */ 1802 update |= memory_region_snapshot_get_dirty(&s->local_mem_region, snap, 1803 offset, width * src_bpp); 1804 1805 /* draw line and change status */ 1806 if (update) { 1807 uint8_t *d = surface_data(surface); 1808 d += y * width * dst_bpp; 1809 1810 /* draw graphics layer */ 1811 draw_line(d, s->local_mem + offset, width, palette); 1812 1813 /* draw hardware cursor */ 1814 if (update_hwc) { 1815 draw_hwc_line(d, hwc_src, width, hwc_palette, c_x, y - c_y); 1816 } 1817 1818 if (y_start < 0) { 1819 y_start = y; 1820 } 1821 } else { 1822 if (y_start >= 0) { 1823 /* flush to display */ 1824 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1825 y_start = -1; 1826 } 1827 } 1828 } 1829 g_free(snap); 1830 1831 /* complete flush to display */ 1832 if (y_start >= 0) { 1833 dpy_gfx_update(s->con, 0, y_start, width, y - y_start); 1834 } 1835 } 1836 1837 static const GraphicHwOps sm501_ops = { 1838 .gfx_update = sm501_update_display, 1839 }; 1840 1841 static void sm501_reset(SM501State *s) 1842 { 1843 s->system_control = 0x00100000; /* 2D engine FIFO empty */ 1844 /* 1845 * Bits 17 (SH), 7 (CDR), 6:5 (Test), 2:0 (Bus) are all supposed 1846 * to be determined at reset by GPIO lines which set config bits. 1847 * We hardwire them: 1848 * SH = 0 : Hitachi Ready Polarity == Active Low 1849 * CDR = 0 : do not reset clock divider 1850 * TEST = 0 : Normal mode (not testing the silicon) 1851 * BUS = 0 : Hitachi SH3/SH4 1852 */ 1853 s->misc_control = SM501_MISC_DAC_POWER; 1854 s->gpio_31_0_control = 0; 1855 s->gpio_63_32_control = 0; 1856 s->dram_control = 0; 1857 s->arbitration_control = 0x05146732; 1858 s->irq_mask = 0; 1859 s->misc_timing = 0; 1860 s->power_mode_control = 0; 1861 s->i2c_byte_count = 0; 1862 s->i2c_status = 0; 1863 s->i2c_addr = 0; 1864 memset(s->i2c_data, 0, 16); 1865 s->dc_panel_control = 0x00010000; /* FIFO level 3 */ 1866 s->dc_video_control = 0; 1867 s->dc_crt_control = 0x00010000; 1868 s->twoD_source = 0; 1869 s->twoD_destination = 0; 1870 s->twoD_dimension = 0; 1871 s->twoD_control = 0; 1872 s->twoD_pitch = 0; 1873 s->twoD_foreground = 0; 1874 s->twoD_background = 0; 1875 s->twoD_stretch = 0; 1876 s->twoD_color_compare = 0; 1877 s->twoD_color_compare_mask = 0; 1878 s->twoD_mask = 0; 1879 s->twoD_clip_tl = 0; 1880 s->twoD_clip_br = 0; 1881 s->twoD_mono_pattern_low = 0; 1882 s->twoD_mono_pattern_high = 0; 1883 s->twoD_window_width = 0; 1884 s->twoD_source_base = 0; 1885 s->twoD_destination_base = 0; 1886 s->twoD_alpha = 0; 1887 s->twoD_wrap = 0; 1888 } 1889 1890 static void sm501_init(SM501State *s, DeviceState *dev, 1891 uint32_t local_mem_bytes) 1892 { 1893 #ifndef CONFIG_PIXMAN 1894 if (s->use_pixman != 0) { 1895 warn_report("x-pixman != 0, not effective without PIXMAN"); 1896 } 1897 #endif 1898 1899 s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes); 1900 1901 /* local memory */ 1902 memory_region_init_ram(&s->local_mem_region, OBJECT(dev), "sm501.local", 1903 get_local_mem_size(s), &error_fatal); 1904 memory_region_set_log(&s->local_mem_region, true, DIRTY_MEMORY_VGA); 1905 s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region); 1906 1907 /* i2c */ 1908 s->i2c_bus = i2c_init_bus(dev, "sm501.i2c"); 1909 /* ddc */ 1910 I2CDDCState *ddc = I2CDDC(qdev_new(TYPE_I2CDDC)); 1911 i2c_slave_set_address(I2C_SLAVE(ddc), 0x50); 1912 qdev_realize_and_unref(DEVICE(ddc), BUS(s->i2c_bus), &error_abort); 1913 1914 /* mmio */ 1915 memory_region_init(&s->mmio_region, OBJECT(dev), "sm501.mmio", MMIO_SIZE); 1916 memory_region_init_io(&s->system_config_region, OBJECT(dev), 1917 &sm501_system_config_ops, s, 1918 "sm501-system-config", 0x6c); 1919 memory_region_add_subregion(&s->mmio_region, SM501_SYS_CONFIG, 1920 &s->system_config_region); 1921 memory_region_init_io(&s->i2c_region, OBJECT(dev), &sm501_i2c_ops, s, 1922 "sm501-i2c", 0x14); 1923 memory_region_add_subregion(&s->mmio_region, SM501_I2C, &s->i2c_region); 1924 memory_region_init_io(&s->disp_ctrl_region, OBJECT(dev), 1925 &sm501_disp_ctrl_ops, s, 1926 "sm501-disp-ctrl", 0x1000); 1927 memory_region_add_subregion(&s->mmio_region, SM501_DC, 1928 &s->disp_ctrl_region); 1929 memory_region_init_io(&s->twoD_engine_region, OBJECT(dev), 1930 &sm501_2d_engine_ops, s, 1931 "sm501-2d-engine", 0x54); 1932 memory_region_add_subregion(&s->mmio_region, SM501_2D_ENGINE, 1933 &s->twoD_engine_region); 1934 1935 /* create qemu graphic console */ 1936 s->con = graphic_console_init(dev, 0, &sm501_ops, s); 1937 } 1938 1939 static const VMStateDescription vmstate_sm501_state = { 1940 .name = "sm501-state", 1941 .version_id = 1, 1942 .minimum_version_id = 1, 1943 .fields = (VMStateField[]) { 1944 VMSTATE_UINT32(local_mem_size_index, SM501State), 1945 VMSTATE_UINT32(system_control, SM501State), 1946 VMSTATE_UINT32(misc_control, SM501State), 1947 VMSTATE_UINT32(gpio_31_0_control, SM501State), 1948 VMSTATE_UINT32(gpio_63_32_control, SM501State), 1949 VMSTATE_UINT32(dram_control, SM501State), 1950 VMSTATE_UINT32(arbitration_control, SM501State), 1951 VMSTATE_UINT32(irq_mask, SM501State), 1952 VMSTATE_UINT32(misc_timing, SM501State), 1953 VMSTATE_UINT32(power_mode_control, SM501State), 1954 VMSTATE_UINT32(uart0_ier, SM501State), 1955 VMSTATE_UINT32(uart0_lcr, SM501State), 1956 VMSTATE_UINT32(uart0_mcr, SM501State), 1957 VMSTATE_UINT32(uart0_scr, SM501State), 1958 VMSTATE_UINT8_ARRAY(dc_palette, SM501State, DC_PALETTE_ENTRIES), 1959 VMSTATE_UINT32(dc_panel_control, SM501State), 1960 VMSTATE_UINT32(dc_panel_panning_control, SM501State), 1961 VMSTATE_UINT32(dc_panel_fb_addr, SM501State), 1962 VMSTATE_UINT32(dc_panel_fb_offset, SM501State), 1963 VMSTATE_UINT32(dc_panel_fb_width, SM501State), 1964 VMSTATE_UINT32(dc_panel_fb_height, SM501State), 1965 VMSTATE_UINT32(dc_panel_tl_location, SM501State), 1966 VMSTATE_UINT32(dc_panel_br_location, SM501State), 1967 VMSTATE_UINT32(dc_panel_h_total, SM501State), 1968 VMSTATE_UINT32(dc_panel_h_sync, SM501State), 1969 VMSTATE_UINT32(dc_panel_v_total, SM501State), 1970 VMSTATE_UINT32(dc_panel_v_sync, SM501State), 1971 VMSTATE_UINT32(dc_panel_hwc_addr, SM501State), 1972 VMSTATE_UINT32(dc_panel_hwc_location, SM501State), 1973 VMSTATE_UINT32(dc_panel_hwc_color_1_2, SM501State), 1974 VMSTATE_UINT32(dc_panel_hwc_color_3, SM501State), 1975 VMSTATE_UINT32(dc_video_control, SM501State), 1976 VMSTATE_UINT32(dc_crt_control, SM501State), 1977 VMSTATE_UINT32(dc_crt_fb_addr, SM501State), 1978 VMSTATE_UINT32(dc_crt_fb_offset, SM501State), 1979 VMSTATE_UINT32(dc_crt_h_total, SM501State), 1980 VMSTATE_UINT32(dc_crt_h_sync, SM501State), 1981 VMSTATE_UINT32(dc_crt_v_total, SM501State), 1982 VMSTATE_UINT32(dc_crt_v_sync, SM501State), 1983 VMSTATE_UINT32(dc_crt_hwc_addr, SM501State), 1984 VMSTATE_UINT32(dc_crt_hwc_location, SM501State), 1985 VMSTATE_UINT32(dc_crt_hwc_color_1_2, SM501State), 1986 VMSTATE_UINT32(dc_crt_hwc_color_3, SM501State), 1987 VMSTATE_UINT32(twoD_source, SM501State), 1988 VMSTATE_UINT32(twoD_destination, SM501State), 1989 VMSTATE_UINT32(twoD_dimension, SM501State), 1990 VMSTATE_UINT32(twoD_control, SM501State), 1991 VMSTATE_UINT32(twoD_pitch, SM501State), 1992 VMSTATE_UINT32(twoD_foreground, SM501State), 1993 VMSTATE_UINT32(twoD_background, SM501State), 1994 VMSTATE_UINT32(twoD_stretch, SM501State), 1995 VMSTATE_UINT32(twoD_color_compare, SM501State), 1996 VMSTATE_UINT32(twoD_color_compare_mask, SM501State), 1997 VMSTATE_UINT32(twoD_mask, SM501State), 1998 VMSTATE_UINT32(twoD_clip_tl, SM501State), 1999 VMSTATE_UINT32(twoD_clip_br, SM501State), 2000 VMSTATE_UINT32(twoD_mono_pattern_low, SM501State), 2001 VMSTATE_UINT32(twoD_mono_pattern_high, SM501State), 2002 VMSTATE_UINT32(twoD_window_width, SM501State), 2003 VMSTATE_UINT32(twoD_source_base, SM501State), 2004 VMSTATE_UINT32(twoD_destination_base, SM501State), 2005 VMSTATE_UINT32(twoD_alpha, SM501State), 2006 VMSTATE_UINT32(twoD_wrap, SM501State), 2007 /* Added in version 2 */ 2008 VMSTATE_UINT8(i2c_byte_count, SM501State), 2009 VMSTATE_UINT8(i2c_status, SM501State), 2010 VMSTATE_UINT8(i2c_addr, SM501State), 2011 VMSTATE_UINT8_ARRAY(i2c_data, SM501State, 16), 2012 VMSTATE_END_OF_LIST() 2013 } 2014 }; 2015 2016 #define TYPE_SYSBUS_SM501 "sysbus-sm501" 2017 OBJECT_DECLARE_SIMPLE_TYPE(SM501SysBusState, SYSBUS_SM501) 2018 2019 struct SM501SysBusState { 2020 /*< private >*/ 2021 SysBusDevice parent_obj; 2022 /*< public >*/ 2023 SM501State state; 2024 uint32_t vram_size; 2025 SerialMM serial; 2026 OHCISysBusState ohci; 2027 }; 2028 2029 static void sm501_realize_sysbus(DeviceState *dev, Error **errp) 2030 { 2031 SM501SysBusState *s = SYSBUS_SM501(dev); 2032 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 2033 MemoryRegion *mr; 2034 2035 sm501_init(&s->state, dev, s->vram_size); 2036 if (get_local_mem_size(&s->state) != s->vram_size) { 2037 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 2038 get_local_mem_size(&s->state)); 2039 return; 2040 } 2041 sysbus_init_mmio(sbd, &s->state.local_mem_region); 2042 sysbus_init_mmio(sbd, &s->state.mmio_region); 2043 2044 /* bridge to usb host emulation module */ 2045 sysbus_realize_and_unref(SYS_BUS_DEVICE(&s->ohci), &error_fatal); 2046 memory_region_add_subregion(&s->state.mmio_region, SM501_USB_HOST, 2047 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->ohci), 0)); 2048 sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->ohci)); 2049 2050 /* bridge to serial emulation module */ 2051 sysbus_realize(SYS_BUS_DEVICE(&s->serial), &error_fatal); 2052 mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->serial), 0); 2053 memory_region_add_subregion(&s->state.mmio_region, SM501_UART0, mr); 2054 /* TODO : chain irq to IRL */ 2055 } 2056 2057 static Property sm501_sysbus_properties[] = { 2058 DEFINE_PROP_UINT32("vram-size", SM501SysBusState, vram_size, 0), 2059 /* this a debug option, prefer PROP_UINT over PROP_BIT for simplicity */ 2060 DEFINE_PROP_UINT8("x-pixman", SM501SysBusState, state.use_pixman, DEFAULT_X_PIXMAN), 2061 DEFINE_PROP_END_OF_LIST(), 2062 }; 2063 2064 static void sm501_reset_sysbus(DeviceState *dev) 2065 { 2066 SM501SysBusState *s = SYSBUS_SM501(dev); 2067 sm501_reset(&s->state); 2068 } 2069 2070 static const VMStateDescription vmstate_sm501_sysbus = { 2071 .name = TYPE_SYSBUS_SM501, 2072 .version_id = 2, 2073 .minimum_version_id = 2, 2074 .fields = (VMStateField[]) { 2075 VMSTATE_STRUCT(state, SM501SysBusState, 1, 2076 vmstate_sm501_state, SM501State), 2077 VMSTATE_END_OF_LIST() 2078 } 2079 }; 2080 2081 static void sm501_sysbus_class_init(ObjectClass *klass, void *data) 2082 { 2083 DeviceClass *dc = DEVICE_CLASS(klass); 2084 2085 dc->realize = sm501_realize_sysbus; 2086 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2087 dc->desc = "SM501 Multimedia Companion"; 2088 device_class_set_props(dc, sm501_sysbus_properties); 2089 dc->reset = sm501_reset_sysbus; 2090 dc->vmsd = &vmstate_sm501_sysbus; 2091 } 2092 2093 static void sm501_sysbus_init(Object *o) 2094 { 2095 SM501SysBusState *sm501 = SYSBUS_SM501(o); 2096 OHCISysBusState *ohci = &sm501->ohci; 2097 SerialMM *smm = &sm501->serial; 2098 2099 object_initialize_child(o, "ohci", ohci, TYPE_SYSBUS_OHCI); 2100 object_property_add_alias(o, "dma-offset", OBJECT(ohci), "dma-offset"); 2101 qdev_prop_set_uint32(DEVICE(ohci), "num-ports", 2); 2102 2103 object_initialize_child(o, "serial", smm, TYPE_SERIAL_MM); 2104 qdev_set_legacy_instance_id(DEVICE(smm), SM501_UART0, 2); 2105 qdev_prop_set_uint8(DEVICE(smm), "regshift", 2); 2106 qdev_prop_set_uint8(DEVICE(smm), "endianness", DEVICE_LITTLE_ENDIAN); 2107 2108 object_property_add_alias(o, "chardev", OBJECT(smm), "chardev"); 2109 } 2110 2111 static const TypeInfo sm501_sysbus_info = { 2112 .name = TYPE_SYSBUS_SM501, 2113 .parent = TYPE_SYS_BUS_DEVICE, 2114 .instance_size = sizeof(SM501SysBusState), 2115 .class_init = sm501_sysbus_class_init, 2116 .instance_init = sm501_sysbus_init, 2117 }; 2118 2119 #define TYPE_PCI_SM501 "sm501" 2120 OBJECT_DECLARE_SIMPLE_TYPE(SM501PCIState, PCI_SM501) 2121 2122 struct SM501PCIState { 2123 /*< private >*/ 2124 PCIDevice parent_obj; 2125 /*< public >*/ 2126 SM501State state; 2127 uint32_t vram_size; 2128 }; 2129 2130 static void sm501_realize_pci(PCIDevice *dev, Error **errp) 2131 { 2132 SM501PCIState *s = PCI_SM501(dev); 2133 2134 sm501_init(&s->state, DEVICE(dev), s->vram_size); 2135 if (get_local_mem_size(&s->state) != s->vram_size) { 2136 error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, 2137 get_local_mem_size(&s->state)); 2138 return; 2139 } 2140 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, 2141 &s->state.local_mem_region); 2142 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, 2143 &s->state.mmio_region); 2144 } 2145 2146 static Property sm501_pci_properties[] = { 2147 DEFINE_PROP_UINT32("vram-size", SM501PCIState, vram_size, 64 * MiB), 2148 DEFINE_PROP_UINT8("x-pixman", SM501PCIState, state.use_pixman, DEFAULT_X_PIXMAN), 2149 DEFINE_PROP_END_OF_LIST(), 2150 }; 2151 2152 static void sm501_reset_pci(DeviceState *dev) 2153 { 2154 SM501PCIState *s = PCI_SM501(dev); 2155 sm501_reset(&s->state); 2156 /* Bits 2:0 of misc_control register is 001 for PCI */ 2157 s->state.misc_control |= 1; 2158 } 2159 2160 static const VMStateDescription vmstate_sm501_pci = { 2161 .name = TYPE_PCI_SM501, 2162 .version_id = 2, 2163 .minimum_version_id = 2, 2164 .fields = (VMStateField[]) { 2165 VMSTATE_PCI_DEVICE(parent_obj, SM501PCIState), 2166 VMSTATE_STRUCT(state, SM501PCIState, 1, 2167 vmstate_sm501_state, SM501State), 2168 VMSTATE_END_OF_LIST() 2169 } 2170 }; 2171 2172 static void sm501_pci_class_init(ObjectClass *klass, void *data) 2173 { 2174 DeviceClass *dc = DEVICE_CLASS(klass); 2175 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 2176 2177 k->realize = sm501_realize_pci; 2178 k->vendor_id = PCI_VENDOR_ID_SILICON_MOTION; 2179 k->device_id = PCI_DEVICE_ID_SM501; 2180 k->class_id = PCI_CLASS_DISPLAY_OTHER; 2181 set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); 2182 dc->desc = "SM501 Display Controller"; 2183 device_class_set_props(dc, sm501_pci_properties); 2184 dc->reset = sm501_reset_pci; 2185 dc->hotpluggable = false; 2186 dc->vmsd = &vmstate_sm501_pci; 2187 } 2188 2189 static void sm501_pci_init(Object *o) 2190 { 2191 object_property_set_description(o, "x-pixman", "Use pixman for: " 2192 "1: fill, 2: blit, 4: overlap blit"); 2193 } 2194 2195 static const TypeInfo sm501_pci_info = { 2196 .name = TYPE_PCI_SM501, 2197 .parent = TYPE_PCI_DEVICE, 2198 .instance_size = sizeof(SM501PCIState), 2199 .class_init = sm501_pci_class_init, 2200 .instance_init = sm501_pci_init, 2201 .interfaces = (InterfaceInfo[]) { 2202 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 2203 { }, 2204 }, 2205 }; 2206 2207 static void sm501_register_types(void) 2208 { 2209 type_register_static(&sm501_sysbus_info); 2210 type_register_static(&sm501_pci_info); 2211 } 2212 2213 type_init(sm501_register_types) 2214