xref: /qemu/hw/display/xlnx_dp.c (revision 94452ac4)
1 /*
2  * Xilinx Display Port
3  *
4  *  Copyright (C) 2015 : GreenSocs Ltd
5  *      http://www.greensocs.com/ , email: info@greensocs.com
6  *
7  *  Developed by :
8  *  Frederic Konrad   <fred.konrad@greensocs.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation, either version 2 of the License, or
13  * (at your option)any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License along
21  * with this program; if not, see <http://www.gnu.org/licenses/>.
22  *
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "qemu/error-report.h"
28 #include "qemu/log.h"
29 #include "qemu/module.h"
30 #include "hw/display/xlnx_dp.h"
31 #include "hw/irq.h"
32 #include "migration/vmstate.h"
33 
34 #ifndef DEBUG_DP
35 #define DEBUG_DP 0
36 #endif
37 
38 #define DPRINTF(fmt, ...) do {                                                 \
39     if (DEBUG_DP) {                                                            \
40         qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__);                            \
41     }                                                                          \
42 } while (0)
43 
44 /*
45  * Register offset for DP.
46  */
47 #define DP_LINK_BW_SET                      (0x0000 >> 2)
48 #define DP_LANE_COUNT_SET                   (0x0004 >> 2)
49 #define DP_ENHANCED_FRAME_EN                (0x0008 >> 2)
50 #define DP_TRAINING_PATTERN_SET             (0x000C >> 2)
51 #define DP_LINK_QUAL_PATTERN_SET            (0x0010 >> 2)
52 #define DP_SCRAMBLING_DISABLE               (0x0014 >> 2)
53 #define DP_DOWNSPREAD_CTRL                  (0x0018 >> 2)
54 #define DP_SOFTWARE_RESET                   (0x001C >> 2)
55 #define DP_TRANSMITTER_ENABLE               (0x0080 >> 2)
56 #define DP_MAIN_STREAM_ENABLE               (0x0084 >> 2)
57 #define DP_FORCE_SCRAMBLER_RESET            (0x00C0 >> 2)
58 #define DP_VERSION_REGISTER                 (0x00F8 >> 2)
59 #define DP_CORE_ID                          (0x00FC >> 2)
60 
61 #define DP_AUX_COMMAND_REGISTER             (0x0100 >> 2)
62 #define AUX_ADDR_ONLY_MASK                  (0x1000)
63 #define AUX_COMMAND_MASK                    (0x0F00)
64 #define AUX_COMMAND_SHIFT                   (8)
65 #define AUX_COMMAND_NBYTES                  (0x000F)
66 
67 #define DP_AUX_WRITE_FIFO                   (0x0104 >> 2)
68 #define DP_AUX_ADDRESS                      (0x0108 >> 2)
69 #define DP_AUX_CLOCK_DIVIDER                (0x010C >> 2)
70 #define DP_TX_USER_FIFO_OVERFLOW            (0x0110 >> 2)
71 #define DP_INTERRUPT_SIGNAL_STATE           (0x0130 >> 2)
72 #define DP_AUX_REPLY_DATA                   (0x0134 >> 2)
73 #define DP_AUX_REPLY_CODE                   (0x0138 >> 2)
74 #define DP_AUX_REPLY_COUNT                  (0x013C >> 2)
75 #define DP_REPLY_DATA_COUNT                 (0x0148 >> 2)
76 #define DP_REPLY_STATUS                     (0x014C >> 2)
77 #define DP_HPD_DURATION                     (0x0150 >> 2)
78 #define DP_MAIN_STREAM_HTOTAL               (0x0180 >> 2)
79 #define DP_MAIN_STREAM_VTOTAL               (0x0184 >> 2)
80 #define DP_MAIN_STREAM_POLARITY             (0x0188 >> 2)
81 #define DP_MAIN_STREAM_HSWIDTH              (0x018C >> 2)
82 #define DP_MAIN_STREAM_VSWIDTH              (0x0190 >> 2)
83 #define DP_MAIN_STREAM_HRES                 (0x0194 >> 2)
84 #define DP_MAIN_STREAM_VRES                 (0x0198 >> 2)
85 #define DP_MAIN_STREAM_HSTART               (0x019C >> 2)
86 #define DP_MAIN_STREAM_VSTART               (0x01A0 >> 2)
87 #define DP_MAIN_STREAM_MISC0                (0x01A4 >> 2)
88 #define DP_MAIN_STREAM_MISC1                (0x01A8 >> 2)
89 #define DP_MAIN_STREAM_M_VID                (0x01AC >> 2)
90 #define DP_MSA_TRANSFER_UNIT_SIZE           (0x01B0 >> 2)
91 #define DP_MAIN_STREAM_N_VID                (0x01B4 >> 2)
92 #define DP_USER_DATA_COUNT_PER_LANE         (0x01BC >> 2)
93 #define DP_MIN_BYTES_PER_TU                 (0x01C4 >> 2)
94 #define DP_FRAC_BYTES_PER_TU                (0x01C8 >> 2)
95 #define DP_INIT_WAIT                        (0x01CC >> 2)
96 #define DP_PHY_RESET                        (0x0200 >> 2)
97 #define DP_PHY_VOLTAGE_DIFF_LANE_0          (0x0220 >> 2)
98 #define DP_PHY_VOLTAGE_DIFF_LANE_1          (0x0224 >> 2)
99 #define DP_TRANSMIT_PRBS7                   (0x0230 >> 2)
100 #define DP_PHY_CLOCK_SELECT                 (0x0234 >> 2)
101 #define DP_TX_PHY_POWER_DOWN                (0x0238 >> 2)
102 #define DP_PHY_PRECURSOR_LANE_0             (0x023C >> 2)
103 #define DP_PHY_PRECURSOR_LANE_1             (0x0240 >> 2)
104 #define DP_PHY_POSTCURSOR_LANE_0            (0x024C >> 2)
105 #define DP_PHY_POSTCURSOR_LANE_1            (0x0250 >> 2)
106 #define DP_PHY_STATUS                       (0x0280 >> 2)
107 
108 #define DP_TX_AUDIO_CONTROL                 (0x0300 >> 2)
109 #define DP_TX_AUD_CTRL                      (1)
110 
111 #define DP_TX_AUDIO_CHANNELS                (0x0304 >> 2)
112 #define DP_TX_AUDIO_INFO_DATA(n)            ((0x0308 + 4 * n) >> 2)
113 #define DP_TX_M_AUD                         (0x0328 >> 2)
114 #define DP_TX_N_AUD                         (0x032C >> 2)
115 #define DP_TX_AUDIO_EXT_DATA(n)             ((0x0330 + 4 * n) >> 2)
116 #define DP_INT_STATUS                       (0x03A0 >> 2)
117 #define DP_INT_VBLNK_START                  (1 << 13)
118 #define DP_INT_MASK                         (0x03A4 >> 2)
119 #define DP_INT_EN                           (0x03A8 >> 2)
120 #define DP_INT_DS                           (0x03AC >> 2)
121 
122 /*
123  * Registers offset for Audio Video Buffer configuration.
124  */
125 #define V_BLEND_OFFSET                      (0xA000)
126 #define V_BLEND_BG_CLR_0                    (0x0000 >> 2)
127 #define V_BLEND_BG_CLR_1                    (0x0004 >> 2)
128 #define V_BLEND_BG_CLR_2                    (0x0008 >> 2)
129 #define V_BLEND_SET_GLOBAL_ALPHA_REG        (0x000C >> 2)
130 #define V_BLEND_OUTPUT_VID_FORMAT           (0x0014 >> 2)
131 #define V_BLEND_LAYER0_CONTROL              (0x0018 >> 2)
132 #define V_BLEND_LAYER1_CONTROL              (0x001C >> 2)
133 
134 #define V_BLEND_RGB2YCBCR_COEFF(n)          ((0x0020 + 4 * n) >> 2)
135 #define V_BLEND_IN1CSC_COEFF(n)             ((0x0044 + 4 * n) >> 2)
136 
137 #define V_BLEND_LUMA_IN1CSC_OFFSET          (0x0068 >> 2)
138 #define V_BLEND_CR_IN1CSC_OFFSET            (0x006C >> 2)
139 #define V_BLEND_CB_IN1CSC_OFFSET            (0x0070 >> 2)
140 #define V_BLEND_LUMA_OUTCSC_OFFSET          (0x0074 >> 2)
141 #define V_BLEND_CR_OUTCSC_OFFSET            (0x0078 >> 2)
142 #define V_BLEND_CB_OUTCSC_OFFSET            (0x007C >> 2)
143 
144 #define V_BLEND_IN2CSC_COEFF(n)             ((0x0080 + 4 * n) >> 2)
145 
146 #define V_BLEND_LUMA_IN2CSC_OFFSET          (0x00A4 >> 2)
147 #define V_BLEND_CR_IN2CSC_OFFSET            (0x00A8 >> 2)
148 #define V_BLEND_CB_IN2CSC_OFFSET            (0x00AC >> 2)
149 #define V_BLEND_CHROMA_KEY_ENABLE           (0x01D0 >> 2)
150 #define V_BLEND_CHROMA_KEY_COMP1            (0x01D4 >> 2)
151 #define V_BLEND_CHROMA_KEY_COMP2            (0x01D8 >> 2)
152 #define V_BLEND_CHROMA_KEY_COMP3            (0x01DC >> 2)
153 
154 /*
155  * Registers offset for Audio Video Buffer configuration.
156  */
157 #define AV_BUF_MANAGER_OFFSET               (0xB000)
158 #define AV_BUF_FORMAT                       (0x0000 >> 2)
159 #define AV_BUF_NON_LIVE_LATENCY             (0x0008 >> 2)
160 #define AV_CHBUF0                           (0x0010 >> 2)
161 #define AV_CHBUF1                           (0x0014 >> 2)
162 #define AV_CHBUF2                           (0x0018 >> 2)
163 #define AV_CHBUF3                           (0x001C >> 2)
164 #define AV_CHBUF4                           (0x0020 >> 2)
165 #define AV_CHBUF5                           (0x0024 >> 2)
166 #define AV_BUF_STC_CONTROL                  (0x002C >> 2)
167 #define AV_BUF_STC_INIT_VALUE0              (0x0030 >> 2)
168 #define AV_BUF_STC_INIT_VALUE1              (0x0034 >> 2)
169 #define AV_BUF_STC_ADJ                      (0x0038 >> 2)
170 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0      (0x003C >> 2)
171 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1      (0x0040 >> 2)
172 #define AV_BUF_STC_EXT_VSYNC_TS_REG0        (0x0044 >> 2)
173 #define AV_BUF_STC_EXT_VSYNC_TS_REG1        (0x0048 >> 2)
174 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0     (0x004C >> 2)
175 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1     (0x0050 >> 2)
176 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0    (0x0054 >> 2)
177 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1    (0x0058 >> 2)
178 #define AV_BUF_STC_SNAPSHOT0                (0x0060 >> 2)
179 #define AV_BUF_STC_SNAPSHOT1                (0x0064 >> 2)
180 #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT    (0x0070 >> 2)
181 #define AV_BUF_HCOUNT_VCOUNT_INT0           (0x0074 >> 2)
182 #define AV_BUF_HCOUNT_VCOUNT_INT1           (0x0078 >> 2)
183 #define AV_BUF_DITHER_CONFIG                (0x007C >> 2)
184 #define AV_BUF_DITHER_CONFIG_MAX            (0x008C >> 2)
185 #define AV_BUF_DITHER_CONFIG_MIN            (0x0090 >> 2)
186 #define AV_BUF_PATTERN_GEN_SELECT           (0x0100 >> 2)
187 #define AV_BUF_AUD_VID_CLK_SOURCE           (0x0120 >> 2)
188 #define AV_BUF_SRST_REG                     (0x0124 >> 2)
189 #define AV_BUF_AUDIO_RDY_INTERVAL           (0x0128 >> 2)
190 #define AV_BUF_AUDIO_CH_CONFIG              (0x012C >> 2)
191 
192 #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
193 
194 #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n)   ((0x020C + 4 * n) >> 2)
195 
196 #define AV_BUF_LIVE_VIDEO_COMP_SF(n)        ((0x0218 + 4 * n) >> 2)
197 
198 #define AV_BUF_LIVE_VID_CONFIG              (0x0224 >> 2)
199 
200 #define AV_BUF_LIVE_GFX_COMP_SF(n)          ((0x0228 + 4 * n) >> 2)
201 
202 #define AV_BUF_LIVE_GFX_CONFIG              (0x0234 >> 2)
203 
204 #define AUDIO_MIXER_REGISTER_OFFSET         (0xC000)
205 #define AUDIO_MIXER_VOLUME_CONTROL          (0x0000 >> 2)
206 #define AUDIO_MIXER_META_DATA               (0x0004 >> 2)
207 #define AUD_CH_STATUS_REG(n)                ((0x0008 + 4 * n) >> 2)
208 #define AUD_CH_A_DATA_REG(n)                ((0x0020 + 4 * n) >> 2)
209 #define AUD_CH_B_DATA_REG(n)                ((0x0038 + 4 * n) >> 2)
210 
211 #define DP_AUDIO_DMA_CHANNEL(n)             (4 + n)
212 #define DP_GRAPHIC_DMA_CHANNEL              (3)
213 #define DP_VIDEO_DMA_CHANNEL                (0)
214 
215 enum DPGraphicFmt {
216     DP_GRAPHIC_RGBA8888 = 0 << 8,
217     DP_GRAPHIC_ABGR8888 = 1 << 8,
218     DP_GRAPHIC_RGB888 = 2 << 8,
219     DP_GRAPHIC_BGR888 = 3 << 8,
220     DP_GRAPHIC_RGBA5551 = 4 << 8,
221     DP_GRAPHIC_RGBA4444 = 5 << 8,
222     DP_GRAPHIC_RGB565 = 6 << 8,
223     DP_GRAPHIC_8BPP = 7 << 8,
224     DP_GRAPHIC_4BPP = 8 << 8,
225     DP_GRAPHIC_2BPP = 9 << 8,
226     DP_GRAPHIC_1BPP = 10 << 8,
227     DP_GRAPHIC_MASK = 0xF << 8
228 };
229 
230 enum DPVideoFmt {
231     DP_NL_VID_CB_Y0_CR_Y1 = 0,
232     DP_NL_VID_CR_Y0_CB_Y1 = 1,
233     DP_NL_VID_Y0_CR_Y1_CB = 2,
234     DP_NL_VID_Y0_CB_Y1_CR = 3,
235     DP_NL_VID_YV16 = 4,
236     DP_NL_VID_YV24 = 5,
237     DP_NL_VID_YV16CL = 6,
238     DP_NL_VID_MONO = 7,
239     DP_NL_VID_YV16CL2 = 8,
240     DP_NL_VID_YUV444 = 9,
241     DP_NL_VID_RGB888 = 10,
242     DP_NL_VID_RGBA8880 = 11,
243     DP_NL_VID_RGB888_10BPC = 12,
244     DP_NL_VID_YUV444_10BPC = 13,
245     DP_NL_VID_YV16CL2_10BPC = 14,
246     DP_NL_VID_YV16CL_10BPC = 15,
247     DP_NL_VID_YV16_10BPC = 16,
248     DP_NL_VID_YV24_10BPC = 17,
249     DP_NL_VID_Y_ONLY_10BPC = 18,
250     DP_NL_VID_YV16_420 = 19,
251     DP_NL_VID_YV16CL_420 = 20,
252     DP_NL_VID_YV16CL2_420 = 21,
253     DP_NL_VID_YV16_420_10BPC = 22,
254     DP_NL_VID_YV16CL_420_10BPC = 23,
255     DP_NL_VID_YV16CL2_420_10BPC = 24,
256     DP_NL_VID_FMT_MASK = 0x1F
257 };
258 
259 typedef enum DPGraphicFmt DPGraphicFmt;
260 typedef enum DPVideoFmt DPVideoFmt;
261 
262 static const VMStateDescription vmstate_dp = {
263     .name = TYPE_XLNX_DP,
264     .version_id = 2,
265     .fields = (VMStateField[]){
266         VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
267                              DP_CORE_REG_ARRAY_SIZE),
268         VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
269                              DP_AVBUF_REG_ARRAY_SIZE),
270         VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
271                              DP_VBLEND_REG_ARRAY_SIZE),
272         VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
273                              DP_AUDIO_REG_ARRAY_SIZE),
274         VMSTATE_PTIMER(vblank, XlnxDPState),
275         VMSTATE_END_OF_LIST()
276     }
277 };
278 
279 #define DP_VBLANK_PTIMER_POLICY (PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | \
280                                  PTIMER_POLICY_CONTINUOUS_TRIGGER |    \
281                                  PTIMER_POLICY_NO_IMMEDIATE_TRIGGER)
282 
283 static void xlnx_dp_update_irq(XlnxDPState *s);
284 
285 static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
286 {
287     XlnxDPState *s = XLNX_DP(opaque);
288 
289     offset = offset >> 2;
290     return s->audio_registers[offset];
291 }
292 
293 static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
294                                 unsigned size)
295 {
296     XlnxDPState *s = XLNX_DP(opaque);
297 
298     offset = offset >> 2;
299 
300     switch (offset) {
301     case AUDIO_MIXER_META_DATA:
302         s->audio_registers[offset] = value & 0x00000001;
303         break;
304     default:
305         s->audio_registers[offset] = value;
306         break;
307     }
308 }
309 
310 static const MemoryRegionOps audio_ops = {
311     .read = xlnx_dp_audio_read,
312     .write = xlnx_dp_audio_write,
313     .endianness = DEVICE_NATIVE_ENDIAN,
314 };
315 
316 static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
317                                                 uint8_t channel)
318 {
319     switch (channel) {
320     case 0:
321         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
322     case 1:
323         return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
324                                                                          16);
325     default:
326         return 0;
327     }
328 }
329 
330 static inline void xlnx_dp_audio_activate(XlnxDPState *s)
331 {
332     bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
333                    & DP_TX_AUD_CTRL) != 0);
334     AUD_set_active_out(s->amixer_output_stream, activated);
335     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
336                                       &s->audio_buffer_0);
337     xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
338                                       &s->audio_buffer_1);
339 }
340 
341 static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
342 {
343     /*
344      * Audio packets are signed and have this shape:
345      * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
346      * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
347      *
348      * Output audio is 16bits saturated.
349      */
350     int i;
351 
352     if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
353         for (i = 0; i < s->audio_data_available[0] / 2; i++) {
354             s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
355                               * xlnx_dp_audio_get_volume(s, 0) / 8192;
356         }
357         s->byte_left = s->audio_data_available[0];
358     } else {
359         memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
360     }
361 
362     if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
363         if ((s->audio_data_available[0] == 0)
364         || (s->audio_data_available[1] == s->audio_data_available[0])) {
365             for (i = 0; i < s->audio_data_available[1] / 2; i++) {
366                 s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
367                                    * xlnx_dp_audio_get_volume(s, 1) / 8192;
368             }
369             s->byte_left = s->audio_data_available[1];
370         }
371     }
372 
373     for (i = 0; i < s->byte_left / 2; i++) {
374         s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
375     }
376 
377     s->data_ptr = 0;
378 }
379 
380 static void xlnx_dp_audio_callback(void *opaque, int avail)
381 {
382     /*
383      * Get some data from the DPDMA and compute these datas.
384      * Then wait for QEMU's audio subsystem to call this callback.
385      */
386     XlnxDPState *s = XLNX_DP(opaque);
387     size_t written = 0;
388 
389     /* If there are already some data don't get more data. */
390     if (s->byte_left == 0) {
391         s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
392                                                                   true);
393         s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
394                                                                   true);
395         xlnx_dp_audio_mix_buffer(s);
396     }
397 
398     /* Send the buffer through the audio. */
399     if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
400         if (s->byte_left != 0) {
401             written = AUD_write(s->amixer_output_stream,
402                                 &s->out_buffer[s->data_ptr], s->byte_left);
403         } else {
404              int len_to_copy;
405             /*
406              * There is nothing to play.. We don't have any data! Fill the
407              * buffer with zero's and send it.
408              */
409             written = 0;
410             while (avail) {
411                 len_to_copy = MIN(AUD_CHBUF_MAX_DEPTH, avail);
412                 memset(s->out_buffer, 0, len_to_copy);
413                 avail -= AUD_write(s->amixer_output_stream, s->out_buffer,
414                                    len_to_copy);
415             }
416         }
417     } else {
418         written = AUD_write(s->amixer_output_stream,
419                             &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
420     }
421     s->byte_left -= written;
422     s->data_ptr += written;
423 }
424 
425 /*
426  * AUX channel related function.
427  */
428 static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
429 {
430     fifo8_reset(&s->rx_fifo);
431 }
432 
433 static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
434 {
435     DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
436     fifo8_push_all(&s->rx_fifo, buf, len);
437 }
438 
439 static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
440 {
441     uint8_t ret;
442 
443     if (fifo8_is_empty(&s->rx_fifo)) {
444         qemu_log_mask(LOG_GUEST_ERROR,
445                       "%s: Reading empty RX_FIFO\n",
446                       __func__);
447         /*
448          * The datasheet is not clear about the reset value, it seems
449          * to be unspecified. We choose to return '0'.
450          */
451         ret = 0;
452     } else {
453         ret = fifo8_pop(&s->rx_fifo);
454         DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
455     }
456     return ret;
457 }
458 
459 static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
460 {
461     fifo8_reset(&s->tx_fifo);
462 }
463 
464 static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
465 {
466     DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
467     fifo8_push_all(&s->tx_fifo, buf, len);
468 }
469 
470 static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
471 {
472     uint8_t ret;
473 
474     if (fifo8_is_empty(&s->tx_fifo)) {
475         error_report("%s: TX_FIFO underflow", __func__);
476         abort();
477     }
478     ret = fifo8_pop(&s->tx_fifo);
479     DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
480     return ret;
481 }
482 
483 static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
484 {
485     return s->core_registers[DP_AUX_ADDRESS];
486 }
487 
488 /*
489  * Get command from the register.
490  */
491 static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
492 {
493     bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
494     AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
495     uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
496     uint8_t buf[16];
497     int i;
498 
499     /*
500      * When an address_only command is executed nothing happen to the fifo, so
501      * just make nbytes = 0.
502      */
503     if (address_only) {
504         nbytes = 0;
505     }
506 
507     switch (cmd) {
508     case READ_AUX:
509     case READ_I2C:
510     case READ_I2C_MOT:
511         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
512                                                xlnx_dp_aux_get_address(s),
513                                                nbytes, buf);
514         s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
515 
516         if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
517             xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
518         }
519         break;
520     case WRITE_AUX:
521     case WRITE_I2C:
522     case WRITE_I2C_MOT:
523         for (i = 0; i < nbytes; i++) {
524             buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
525         }
526         s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
527                                                xlnx_dp_aux_get_address(s),
528                                                nbytes, buf);
529         xlnx_dp_aux_clear_tx_fifo(s);
530         break;
531     case WRITE_I2C_STATUS:
532         qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
533         break;
534     default:
535         qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid command: %u", __func__, cmd);
536         return;
537     }
538 
539     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
540 }
541 
542 static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
543                               Error **errp)
544 {
545     XlnxDPState *s = XLNX_DP(obj);
546     if (s->console) {
547         DisplaySurface *surface = qemu_console_surface(s->console);
548         XlnxDPDMAState *dma = XLNX_DPDMA(val);
549         xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
550                                           surface_data(surface));
551     }
552 }
553 
554 static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
555 {
556     return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
557 }
558 
559 static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
560 {
561     /*
562      * If the alpha is totally opaque (255) we consider the alpha is disabled to
563      * reduce CPU consumption.
564      */
565     return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
566            ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
567 }
568 
569 static void xlnx_dp_recreate_surface(XlnxDPState *s)
570 {
571     /*
572      * Two possibilities, if blending is enabled the console displays
573      * bout_plane, if not g_plane is displayed.
574      */
575     uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
576     uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
577     DisplaySurface *current_console_surface = qemu_console_surface(s->console);
578 
579     if ((width != 0) && (height != 0)) {
580         /*
581          * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
582          * surface we need to be careful and don't free the surface associated
583          * to the console or double free will happen.
584          */
585         if (s->bout_plane.surface != current_console_surface) {
586             qemu_free_displaysurface(s->bout_plane.surface);
587         }
588         if (s->v_plane.surface != current_console_surface) {
589             qemu_free_displaysurface(s->v_plane.surface);
590         }
591         if (s->g_plane.surface != current_console_surface) {
592             qemu_free_displaysurface(s->g_plane.surface);
593         }
594 
595         s->g_plane.surface
596                 = qemu_create_displaysurface_from(width, height,
597                                                   s->g_plane.format, 0, NULL);
598         s->v_plane.surface
599                 = qemu_create_displaysurface_from(width, height,
600                                                   s->v_plane.format, 0, NULL);
601         if (xlnx_dp_global_alpha_enabled(s)) {
602             s->bout_plane.surface =
603                             qemu_create_displaysurface_from(width,
604                                                             height,
605                                                             s->g_plane.format,
606                                                             0, NULL);
607             dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
608         } else {
609             s->bout_plane.surface = NULL;
610             dpy_gfx_replace_surface(s->console, s->g_plane.surface);
611         }
612 
613         xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
614                                             surface_data(s->g_plane.surface));
615         xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
616                                             surface_data(s->v_plane.surface));
617     }
618 }
619 
620 /*
621  * Change the graphic format of the surface.
622  */
623 static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
624 {
625     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
626     case DP_GRAPHIC_RGBA8888:
627         s->g_plane.format = PIXMAN_r8g8b8a8;
628         break;
629     case DP_GRAPHIC_ABGR8888:
630         s->g_plane.format = PIXMAN_a8b8g8r8;
631         break;
632     case DP_GRAPHIC_RGB565:
633         s->g_plane.format = PIXMAN_r5g6b5;
634         break;
635     case DP_GRAPHIC_RGB888:
636         s->g_plane.format = PIXMAN_r8g8b8;
637         break;
638     case DP_GRAPHIC_BGR888:
639         s->g_plane.format = PIXMAN_b8g8r8;
640         break;
641     default:
642         error_report("%s: unsupported graphic format %u", __func__,
643                      s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
644         abort();
645     }
646 
647     switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
648     case 0:
649         s->v_plane.format = PIXMAN_x8b8g8r8;
650         break;
651     case DP_NL_VID_Y0_CB_Y1_CR:
652         s->v_plane.format = PIXMAN_yuy2;
653         break;
654     case DP_NL_VID_RGBA8880:
655         s->v_plane.format = PIXMAN_x8b8g8r8;
656         break;
657     default:
658         error_report("%s: unsupported video format %u", __func__,
659                      s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
660         abort();
661     }
662 
663     xlnx_dp_recreate_surface(s);
664 }
665 
666 static void xlnx_dp_update_irq(XlnxDPState *s)
667 {
668     uint32_t flags;
669 
670     flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
671     DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
672     qemu_set_irq(s->irq, flags != 0);
673 }
674 
675 static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
676 {
677     XlnxDPState *s = XLNX_DP(opaque);
678     uint64_t ret = 0;
679 
680     offset = offset >> 2;
681 
682     switch (offset) {
683     case DP_TX_USER_FIFO_OVERFLOW:
684         /* This register is cleared after a read */
685         ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
686         s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
687         break;
688     case DP_AUX_REPLY_DATA:
689         ret = xlnx_dp_aux_pop_rx_fifo(s);
690         break;
691     case DP_INTERRUPT_SIGNAL_STATE:
692         /*
693          * XXX: Not sure it is the right thing to do actually.
694          * The register is not written by the device driver so it's stuck
695          * to 0x04.
696          */
697         ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
698         s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
699         break;
700     case DP_AUX_WRITE_FIFO:
701     case DP_TX_AUDIO_INFO_DATA(0):
702     case DP_TX_AUDIO_INFO_DATA(1):
703     case DP_TX_AUDIO_INFO_DATA(2):
704     case DP_TX_AUDIO_INFO_DATA(3):
705     case DP_TX_AUDIO_INFO_DATA(4):
706     case DP_TX_AUDIO_INFO_DATA(5):
707     case DP_TX_AUDIO_INFO_DATA(6):
708     case DP_TX_AUDIO_INFO_DATA(7):
709     case DP_TX_AUDIO_EXT_DATA(0):
710     case DP_TX_AUDIO_EXT_DATA(1):
711     case DP_TX_AUDIO_EXT_DATA(2):
712     case DP_TX_AUDIO_EXT_DATA(3):
713     case DP_TX_AUDIO_EXT_DATA(4):
714     case DP_TX_AUDIO_EXT_DATA(5):
715     case DP_TX_AUDIO_EXT_DATA(6):
716     case DP_TX_AUDIO_EXT_DATA(7):
717     case DP_TX_AUDIO_EXT_DATA(8):
718         /* write only registers */
719         ret = 0;
720         break;
721     default:
722         assert(offset <= (0x3AC >> 2));
723         if (offset == (0x3A8 >> 2) || offset == (0x3AC >> 2)) {
724             ret = s->core_registers[DP_INT_MASK];
725         } else {
726             ret = s->core_registers[offset];
727         }
728         break;
729     }
730 
731     DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
732     return ret;
733 }
734 
735 static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
736                           unsigned size)
737 {
738     XlnxDPState *s = XLNX_DP(opaque);
739 
740     DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
741 
742     offset = offset >> 2;
743 
744     switch (offset) {
745     /*
746      * Only special write case are handled.
747      */
748     case DP_LINK_BW_SET:
749         s->core_registers[offset] = value & 0x000000FF;
750         break;
751     case DP_LANE_COUNT_SET:
752     case DP_MAIN_STREAM_MISC0:
753         s->core_registers[offset] = value & 0x0000000F;
754         break;
755     case DP_TRAINING_PATTERN_SET:
756     case DP_LINK_QUAL_PATTERN_SET:
757     case DP_MAIN_STREAM_POLARITY:
758     case DP_PHY_VOLTAGE_DIFF_LANE_0:
759     case DP_PHY_VOLTAGE_DIFF_LANE_1:
760         s->core_registers[offset] = value & 0x00000003;
761         break;
762     case DP_ENHANCED_FRAME_EN:
763     case DP_SCRAMBLING_DISABLE:
764     case DP_DOWNSPREAD_CTRL:
765     case DP_MAIN_STREAM_ENABLE:
766     case DP_TRANSMIT_PRBS7:
767         s->core_registers[offset] = value & 0x00000001;
768         break;
769     case DP_PHY_CLOCK_SELECT:
770         s->core_registers[offset] = value & 0x00000007;
771         break;
772     case DP_SOFTWARE_RESET:
773         /*
774          * No need to update this bit as it's read '0'.
775          */
776         /*
777          * TODO: reset IP.
778          */
779         break;
780     case DP_TRANSMITTER_ENABLE:
781         s->core_registers[offset] = value & 0x01;
782         ptimer_transaction_begin(s->vblank);
783         if (value & 0x1) {
784             ptimer_run(s->vblank, 0);
785         } else {
786             ptimer_stop(s->vblank);
787         }
788         ptimer_transaction_commit(s->vblank);
789         break;
790     case DP_FORCE_SCRAMBLER_RESET:
791         /*
792          * No need to update this bit as it's read '0'.
793          */
794         /*
795          * TODO: force a scrambler reset??
796          */
797         break;
798     case DP_AUX_COMMAND_REGISTER:
799         s->core_registers[offset] = value & 0x00001F0F;
800         xlnx_dp_aux_set_command(s, s->core_registers[offset]);
801         break;
802     case DP_MAIN_STREAM_HTOTAL:
803     case DP_MAIN_STREAM_VTOTAL:
804     case DP_MAIN_STREAM_HSTART:
805     case DP_MAIN_STREAM_VSTART:
806         s->core_registers[offset] = value & 0x0000FFFF;
807         break;
808     case DP_MAIN_STREAM_HRES:
809     case DP_MAIN_STREAM_VRES:
810         s->core_registers[offset] = value & 0x0000FFFF;
811         xlnx_dp_recreate_surface(s);
812         break;
813     case DP_MAIN_STREAM_HSWIDTH:
814     case DP_MAIN_STREAM_VSWIDTH:
815         s->core_registers[offset] = value & 0x00007FFF;
816         break;
817     case DP_MAIN_STREAM_MISC1:
818         s->core_registers[offset] = value & 0x00000086;
819         break;
820     case DP_MAIN_STREAM_M_VID:
821     case DP_MAIN_STREAM_N_VID:
822         s->core_registers[offset] = value & 0x00FFFFFF;
823         break;
824     case DP_MSA_TRANSFER_UNIT_SIZE:
825     case DP_MIN_BYTES_PER_TU:
826     case DP_INIT_WAIT:
827         s->core_registers[offset] = value & 0x00000007;
828         break;
829     case DP_USER_DATA_COUNT_PER_LANE:
830         s->core_registers[offset] = value & 0x0003FFFF;
831         break;
832     case DP_FRAC_BYTES_PER_TU:
833         s->core_registers[offset] = value & 0x000003FF;
834         break;
835     case DP_PHY_RESET:
836         s->core_registers[offset] = value & 0x00010003;
837         /*
838          * TODO: Reset something?
839          */
840         break;
841     case DP_TX_PHY_POWER_DOWN:
842         s->core_registers[offset] = value & 0x0000000F;
843         /*
844          * TODO: Power down things?
845          */
846         break;
847     case DP_AUX_WRITE_FIFO: {
848         uint8_t c = value;
849         xlnx_dp_aux_push_tx_fifo(s, &c, 1);
850         break;
851     }
852     case DP_AUX_CLOCK_DIVIDER:
853         break;
854     case DP_AUX_REPLY_COUNT:
855         /*
856          * Writing to this register clear the counter.
857          */
858         s->core_registers[offset] = 0x00000000;
859         break;
860     case DP_AUX_ADDRESS:
861         s->core_registers[offset] = value & 0x000FFFFF;
862         break;
863     case DP_VERSION_REGISTER:
864     case DP_CORE_ID:
865     case DP_TX_USER_FIFO_OVERFLOW:
866     case DP_AUX_REPLY_DATA:
867     case DP_AUX_REPLY_CODE:
868     case DP_REPLY_DATA_COUNT:
869     case DP_REPLY_STATUS:
870     case DP_HPD_DURATION:
871         /*
872          * Write to read only location..
873          */
874         break;
875     case DP_TX_AUDIO_CONTROL:
876         s->core_registers[offset] = value & 0x00000001;
877         xlnx_dp_audio_activate(s);
878         break;
879     case DP_TX_AUDIO_CHANNELS:
880         s->core_registers[offset] = value & 0x00000007;
881         xlnx_dp_audio_activate(s);
882         break;
883     case DP_INT_STATUS:
884         s->core_registers[DP_INT_STATUS] &= ~value;
885         xlnx_dp_update_irq(s);
886         break;
887     case DP_INT_EN:
888         s->core_registers[DP_INT_MASK] &= ~value;
889         xlnx_dp_update_irq(s);
890         break;
891     case DP_INT_DS:
892         s->core_registers[DP_INT_MASK] |= value;
893         xlnx_dp_update_irq(s);
894         break;
895     default:
896         assert(offset <= (0x504C >> 2));
897         s->core_registers[offset] = value;
898         break;
899     }
900 }
901 
902 static const MemoryRegionOps dp_ops = {
903     .read = xlnx_dp_read,
904     .write = xlnx_dp_write,
905     .endianness = DEVICE_NATIVE_ENDIAN,
906     .valid = {
907         .min_access_size = 4,
908         .max_access_size = 4,
909     },
910     .impl = {
911         .min_access_size = 4,
912         .max_access_size = 4,
913     },
914 };
915 
916 /*
917  * This is to handle Read/Write to the Video Blender.
918  */
919 static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
920                                  uint64_t value, unsigned size)
921 {
922     XlnxDPState *s = XLNX_DP(opaque);
923     bool alpha_was_enabled;
924 
925     DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
926                                                                (uint32_t)value);
927     offset = offset >> 2;
928 
929     switch (offset) {
930     case V_BLEND_BG_CLR_0:
931     case V_BLEND_BG_CLR_1:
932     case V_BLEND_BG_CLR_2:
933         s->vblend_registers[offset] = value & 0x00000FFF;
934         break;
935     case V_BLEND_SET_GLOBAL_ALPHA_REG:
936         /*
937          * A write to this register can enable or disable blending. Thus we need
938          * to recreate the surfaces.
939          */
940         alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
941         s->vblend_registers[offset] = value & 0x000001FF;
942         if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
943             xlnx_dp_recreate_surface(s);
944         }
945         break;
946     case V_BLEND_OUTPUT_VID_FORMAT:
947         s->vblend_registers[offset] = value & 0x00000017;
948         break;
949     case V_BLEND_LAYER0_CONTROL:
950     case V_BLEND_LAYER1_CONTROL:
951         s->vblend_registers[offset] = value & 0x00000103;
952         break;
953     case V_BLEND_RGB2YCBCR_COEFF(0):
954     case V_BLEND_RGB2YCBCR_COEFF(1):
955     case V_BLEND_RGB2YCBCR_COEFF(2):
956     case V_BLEND_RGB2YCBCR_COEFF(3):
957     case V_BLEND_RGB2YCBCR_COEFF(4):
958     case V_BLEND_RGB2YCBCR_COEFF(5):
959     case V_BLEND_RGB2YCBCR_COEFF(6):
960     case V_BLEND_RGB2YCBCR_COEFF(7):
961     case V_BLEND_RGB2YCBCR_COEFF(8):
962     case V_BLEND_IN1CSC_COEFF(0):
963     case V_BLEND_IN1CSC_COEFF(1):
964     case V_BLEND_IN1CSC_COEFF(2):
965     case V_BLEND_IN1CSC_COEFF(3):
966     case V_BLEND_IN1CSC_COEFF(4):
967     case V_BLEND_IN1CSC_COEFF(5):
968     case V_BLEND_IN1CSC_COEFF(6):
969     case V_BLEND_IN1CSC_COEFF(7):
970     case V_BLEND_IN1CSC_COEFF(8):
971     case V_BLEND_IN2CSC_COEFF(0):
972     case V_BLEND_IN2CSC_COEFF(1):
973     case V_BLEND_IN2CSC_COEFF(2):
974     case V_BLEND_IN2CSC_COEFF(3):
975     case V_BLEND_IN2CSC_COEFF(4):
976     case V_BLEND_IN2CSC_COEFF(5):
977     case V_BLEND_IN2CSC_COEFF(6):
978     case V_BLEND_IN2CSC_COEFF(7):
979     case V_BLEND_IN2CSC_COEFF(8):
980         s->vblend_registers[offset] = value & 0x0000FFFF;
981         break;
982     case V_BLEND_LUMA_IN1CSC_OFFSET:
983     case V_BLEND_CR_IN1CSC_OFFSET:
984     case V_BLEND_CB_IN1CSC_OFFSET:
985     case V_BLEND_LUMA_IN2CSC_OFFSET:
986     case V_BLEND_CR_IN2CSC_OFFSET:
987     case V_BLEND_CB_IN2CSC_OFFSET:
988     case V_BLEND_LUMA_OUTCSC_OFFSET:
989     case V_BLEND_CR_OUTCSC_OFFSET:
990     case V_BLEND_CB_OUTCSC_OFFSET:
991         s->vblend_registers[offset] = value & 0x3FFF7FFF;
992         break;
993     case V_BLEND_CHROMA_KEY_ENABLE:
994         s->vblend_registers[offset] = value & 0x00000003;
995         break;
996     case V_BLEND_CHROMA_KEY_COMP1:
997     case V_BLEND_CHROMA_KEY_COMP2:
998     case V_BLEND_CHROMA_KEY_COMP3:
999         s->vblend_registers[offset] = value & 0x0FFF0FFF;
1000         break;
1001     default:
1002         s->vblend_registers[offset] = value;
1003         break;
1004     }
1005 }
1006 
1007 static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
1008                                     unsigned size)
1009 {
1010     XlnxDPState *s = XLNX_DP(opaque);
1011 
1012     DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1013             s->vblend_registers[offset >> 2]);
1014     return s->vblend_registers[offset >> 2];
1015 }
1016 
1017 static const MemoryRegionOps vblend_ops = {
1018     .read = xlnx_dp_vblend_read,
1019     .write = xlnx_dp_vblend_write,
1020     .endianness = DEVICE_NATIVE_ENDIAN,
1021     .valid = {
1022         .min_access_size = 4,
1023         .max_access_size = 4,
1024     },
1025     .impl = {
1026         .min_access_size = 4,
1027         .max_access_size = 4,
1028     },
1029 };
1030 
1031 /*
1032  * This is to handle Read/Write to the Audio Video buffer manager.
1033  */
1034 static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1035                                  unsigned size)
1036 {
1037     XlnxDPState *s = XLNX_DP(opaque);
1038 
1039     DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1040                                                                (uint32_t)value);
1041     offset = offset >> 2;
1042 
1043     switch (offset) {
1044     case AV_BUF_FORMAT:
1045         s->avbufm_registers[offset] = value & 0x00000FFF;
1046         xlnx_dp_change_graphic_fmt(s);
1047         break;
1048     case AV_CHBUF0:
1049     case AV_CHBUF1:
1050     case AV_CHBUF2:
1051     case AV_CHBUF3:
1052     case AV_CHBUF4:
1053     case AV_CHBUF5:
1054         s->avbufm_registers[offset] = value & 0x0000007F;
1055         break;
1056     case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1057         s->avbufm_registers[offset] = value & 0x0000007F;
1058         break;
1059     case AV_BUF_DITHER_CONFIG:
1060         s->avbufm_registers[offset] = value & 0x000007FF;
1061         break;
1062     case AV_BUF_DITHER_CONFIG_MAX:
1063     case AV_BUF_DITHER_CONFIG_MIN:
1064         s->avbufm_registers[offset] = value & 0x00000FFF;
1065         break;
1066     case AV_BUF_PATTERN_GEN_SELECT:
1067         s->avbufm_registers[offset] = value & 0xFFFFFF03;
1068         break;
1069     case AV_BUF_AUD_VID_CLK_SOURCE:
1070         s->avbufm_registers[offset] = value & 0x00000007;
1071         break;
1072     case AV_BUF_SRST_REG:
1073         s->avbufm_registers[offset] = value & 0x00000002;
1074         break;
1075     case AV_BUF_AUDIO_CH_CONFIG:
1076         s->avbufm_registers[offset] = value & 0x00000003;
1077         break;
1078     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1079     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1080     case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1081     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1082     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1083     case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1084         s->avbufm_registers[offset] = value & 0x0000FFFF;
1085         break;
1086     case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1087     case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1088     case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1089     case AV_BUF_LIVE_VID_CONFIG:
1090     case AV_BUF_LIVE_GFX_COMP_SF(0):
1091     case AV_BUF_LIVE_GFX_COMP_SF(1):
1092     case AV_BUF_LIVE_GFX_COMP_SF(2):
1093     case AV_BUF_LIVE_GFX_CONFIG:
1094     case AV_BUF_NON_LIVE_LATENCY:
1095     case AV_BUF_STC_CONTROL:
1096     case AV_BUF_STC_INIT_VALUE0:
1097     case AV_BUF_STC_INIT_VALUE1:
1098     case AV_BUF_STC_ADJ:
1099     case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1100     case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1101     case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1102     case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1103     case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1104     case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1105     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1106     case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1107     case AV_BUF_STC_SNAPSHOT0:
1108     case AV_BUF_STC_SNAPSHOT1:
1109     case AV_BUF_HCOUNT_VCOUNT_INT0:
1110     case AV_BUF_HCOUNT_VCOUNT_INT1:
1111         qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1112                                  PRIx64 "\n",
1113                       offset << 2);
1114         break;
1115     default:
1116         s->avbufm_registers[offset] = value;
1117         break;
1118     }
1119 }
1120 
1121 static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1122                                     unsigned size)
1123 {
1124     XlnxDPState *s = XLNX_DP(opaque);
1125 
1126     offset = offset >> 2;
1127     return s->avbufm_registers[offset];
1128 }
1129 
1130 static const MemoryRegionOps avbufm_ops = {
1131     .read = xlnx_dp_avbufm_read,
1132     .write = xlnx_dp_avbufm_write,
1133     .endianness = DEVICE_NATIVE_ENDIAN,
1134     .valid = {
1135         .min_access_size = 4,
1136         .max_access_size = 4,
1137     },
1138     .impl = {
1139         .min_access_size = 4,
1140         .max_access_size = 4,
1141     },
1142 };
1143 
1144 /*
1145  * This is a global alpha blending using pixman.
1146  * Both graphic and video planes are multiplied with the global alpha
1147  * coefficient and added.
1148  */
1149 static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1150 {
1151     pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1152                                 pixman_double_to_fixed(1),
1153                                 pixman_double_to_fixed(1.0) };
1154     pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1155                                 pixman_double_to_fixed(1),
1156                                 pixman_double_to_fixed(1.0) };
1157 
1158     if ((surface_width(s->g_plane.surface)
1159          != surface_width(s->v_plane.surface)) ||
1160         (surface_height(s->g_plane.surface)
1161          != surface_height(s->v_plane.surface))) {
1162         return;
1163     }
1164 
1165     alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1166                                        / 256.0);
1167     alpha2[2] = pixman_double_to_fixed((255.0
1168                                     - (double)xlnx_dp_global_alpha_value(s))
1169                                        / 256.0);
1170 
1171     pixman_image_set_filter(s->g_plane.surface->image,
1172                             PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1173     pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1174                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1175                            surface_width(s->g_plane.surface),
1176                            surface_height(s->g_plane.surface));
1177     pixman_image_set_filter(s->v_plane.surface->image,
1178                             PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1179     pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1180                            s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1181                            surface_width(s->g_plane.surface),
1182                            surface_height(s->g_plane.surface));
1183 }
1184 
1185 static void xlnx_dp_update_display(void *opaque)
1186 {
1187     XlnxDPState *s = XLNX_DP(opaque);
1188 
1189     if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1190         return;
1191     }
1192 
1193     xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1194 
1195     /*
1196      * Trigger the DMA channel.
1197      */
1198     if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1199         /*
1200          * An error occurred don't do anything with the data..
1201          * Trigger an underflow interrupt.
1202          */
1203         s->core_registers[DP_INT_STATUS] |= (1 << 21);
1204         xlnx_dp_update_irq(s);
1205         return;
1206     }
1207 
1208     if (xlnx_dp_global_alpha_enabled(s)) {
1209         if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1210             s->core_registers[DP_INT_STATUS] |= (1 << 21);
1211             xlnx_dp_update_irq(s);
1212             return;
1213         }
1214         xlnx_dp_blend_surface(s);
1215     }
1216 
1217     /*
1218      * XXX: We might want to update only what changed.
1219      */
1220     dpy_gfx_update_full(s->console);
1221 }
1222 
1223 static const GraphicHwOps xlnx_dp_gfx_ops = {
1224     .gfx_update  = xlnx_dp_update_display,
1225 };
1226 
1227 static void xlnx_dp_init(Object *obj)
1228 {
1229     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1230     XlnxDPState *s = XLNX_DP(obj);
1231 
1232     memory_region_init(&s->container, obj, TYPE_XLNX_DP, DP_CONTAINER_SIZE);
1233 
1234     memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1235                           ".core", sizeof(s->core_registers));
1236     memory_region_add_subregion(&s->container, DP_CORE_REG_OFFSET,
1237                                 &s->core_iomem);
1238 
1239     memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1240                           ".v_blend", sizeof(s->vblend_registers));
1241     memory_region_add_subregion(&s->container, DP_VBLEND_REG_OFFSET,
1242                                 &s->vblend_iomem);
1243 
1244     memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1245                           ".av_buffer_manager", sizeof(s->avbufm_registers));
1246     memory_region_add_subregion(&s->container, DP_AVBUF_REG_OFFSET,
1247                                 &s->avbufm_iomem);
1248 
1249     memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1250                           ".audio", sizeof(s->audio_registers));
1251     memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1252 
1253     sysbus_init_mmio(sbd, &s->container);
1254     sysbus_init_irq(sbd, &s->irq);
1255 
1256     object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1257                              (Object **) &s->dpdma,
1258                              xlnx_dp_set_dpdma,
1259                              OBJ_PROP_LINK_STRONG);
1260 
1261     /*
1262      * Initialize AUX Bus.
1263      */
1264     s->aux_bus = aux_bus_init(DEVICE(obj), "aux");
1265 
1266     /*
1267      * Initialize DPCD and EDID..
1268      */
1269     s->dpcd = DPCD(qdev_new("dpcd"));
1270     object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd));
1271 
1272     s->edid = I2CDDC(qdev_new("i2c-ddc"));
1273     i2c_slave_set_address(I2C_SLAVE(s->edid), 0x50);
1274     object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid));
1275 
1276     fifo8_create(&s->rx_fifo, 16);
1277     fifo8_create(&s->tx_fifo, 16);
1278 }
1279 
1280 static void xlnx_dp_finalize(Object *obj)
1281 {
1282     XlnxDPState *s = XLNX_DP(obj);
1283 
1284     fifo8_destroy(&s->tx_fifo);
1285     fifo8_destroy(&s->rx_fifo);
1286 }
1287 
1288 static void vblank_hit(void *opaque)
1289 {
1290     XlnxDPState *s = XLNX_DP(opaque);
1291 
1292     s->core_registers[DP_INT_STATUS] |= DP_INT_VBLNK_START;
1293     xlnx_dp_update_irq(s);
1294 }
1295 
1296 static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1297 {
1298     XlnxDPState *s = XLNX_DP(dev);
1299     DisplaySurface *surface;
1300     struct audsettings as;
1301 
1302     aux_bus_realize(s->aux_bus);
1303 
1304     qdev_realize(DEVICE(s->dpcd), BUS(s->aux_bus), &error_fatal);
1305     aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1306 
1307     qdev_realize_and_unref(DEVICE(s->edid), BUS(aux_get_i2c_bus(s->aux_bus)),
1308                            &error_fatal);
1309 
1310     s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1311     surface = qemu_console_surface(s->console);
1312     xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1313                                       surface_data(surface));
1314 
1315     as.freq = 44100;
1316     as.nchannels = 2;
1317     as.fmt = AUDIO_FORMAT_S16;
1318     as.endianness = 0;
1319 
1320     AUD_register_card("xlnx_dp.audio", &s->aud_card);
1321 
1322     s->amixer_output_stream = AUD_open_out(&s->aud_card,
1323                                            s->amixer_output_stream,
1324                                            "xlnx_dp.audio.out",
1325                                            s,
1326                                            xlnx_dp_audio_callback,
1327                                            &as);
1328     AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1329     xlnx_dp_audio_activate(s);
1330     s->vblank = ptimer_init(vblank_hit, s, DP_VBLANK_PTIMER_POLICY);
1331     ptimer_transaction_begin(s->vblank);
1332     ptimer_set_freq(s->vblank, 30);
1333     ptimer_transaction_commit(s->vblank);
1334 }
1335 
1336 static void xlnx_dp_reset(DeviceState *dev)
1337 {
1338     XlnxDPState *s = XLNX_DP(dev);
1339 
1340     memset(s->core_registers, 0, sizeof(s->core_registers));
1341     s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1342     s->core_registers[DP_CORE_ID] = 0x01020000;
1343     s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1344     s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1345     s->core_registers[DP_INIT_WAIT] = 0x00000020;
1346     s->core_registers[DP_PHY_RESET] = 0x00010003;
1347     s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1348     s->core_registers[DP_PHY_STATUS] = 0x00000043;
1349     s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1350 
1351     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1352     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1353     s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1354     s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1355     s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1356     s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1357     s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1358     s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1359     s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1360 
1361     s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1362     s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1363     s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1364     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1365     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1366     s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1367     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1368     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1369     s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1370     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1371     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1372     s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1373     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1374     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1375     s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1376 
1377     memset(s->audio_registers, 0, sizeof(s->audio_registers));
1378     s->byte_left = 0;
1379 
1380     xlnx_dp_aux_clear_rx_fifo(s);
1381     xlnx_dp_change_graphic_fmt(s);
1382     xlnx_dp_update_irq(s);
1383 }
1384 
1385 static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1386 {
1387     DeviceClass *dc = DEVICE_CLASS(oc);
1388 
1389     dc->realize = xlnx_dp_realize;
1390     dc->vmsd = &vmstate_dp;
1391     dc->reset = xlnx_dp_reset;
1392 }
1393 
1394 static const TypeInfo xlnx_dp_info = {
1395     .name          = TYPE_XLNX_DP,
1396     .parent        = TYPE_SYS_BUS_DEVICE,
1397     .instance_size = sizeof(XlnxDPState),
1398     .instance_init = xlnx_dp_init,
1399     .instance_finalize = xlnx_dp_finalize,
1400     .class_init    = xlnx_dp_class_init,
1401 };
1402 
1403 static void xlnx_dp_register_types(void)
1404 {
1405     type_register_static(&xlnx_dp_info);
1406 }
1407 
1408 type_init(xlnx_dp_register_types)
1409