xref: /qemu/hw/ide/atapi.c (revision e7b3af81)
1 /*
2  * QEMU ATAPI Emulation
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "hw/ide/internal.h"
28 #include "hw/scsi/scsi.h"
29 #include "sysemu/block-backend.h"
30 #include "trace.h"
31 
32 #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS)
33 #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS)
34 
35 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
36 
37 static void padstr8(uint8_t *buf, int buf_size, const char *src)
38 {
39     int i;
40     for(i = 0; i < buf_size; i++) {
41         if (*src)
42             buf[i] = *src++;
43         else
44             buf[i] = ' ';
45     }
46 }
47 
48 static inline void cpu_to_ube16(uint8_t *buf, int val)
49 {
50     buf[0] = val >> 8;
51     buf[1] = val & 0xff;
52 }
53 
54 static inline void cpu_to_ube32(uint8_t *buf, unsigned int val)
55 {
56     buf[0] = val >> 24;
57     buf[1] = val >> 16;
58     buf[2] = val >> 8;
59     buf[3] = val & 0xff;
60 }
61 
62 static inline int ube16_to_cpu(const uint8_t *buf)
63 {
64     return (buf[0] << 8) | buf[1];
65 }
66 
67 static inline int ube32_to_cpu(const uint8_t *buf)
68 {
69     return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
70 }
71 
72 static void lba_to_msf(uint8_t *buf, int lba)
73 {
74     lba += 150;
75     buf[0] = (lba / 75) / 60;
76     buf[1] = (lba / 75) % 60;
77     buf[2] = lba % 75;
78 }
79 
80 static inline int media_present(IDEState *s)
81 {
82     return !s->tray_open && s->nb_sectors > 0;
83 }
84 
85 /* XXX: DVDs that could fit on a CD will be reported as a CD */
86 static inline int media_is_dvd(IDEState *s)
87 {
88     return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS);
89 }
90 
91 static inline int media_is_cd(IDEState *s)
92 {
93     return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
94 }
95 
96 static void cd_data_to_raw(uint8_t *buf, int lba)
97 {
98     /* sync bytes */
99     buf[0] = 0x00;
100     memset(buf + 1, 0xff, 10);
101     buf[11] = 0x00;
102     buf += 12;
103     /* MSF */
104     lba_to_msf(buf, lba);
105     buf[3] = 0x01; /* mode 1 data */
106     buf += 4;
107     /* data */
108     buf += 2048;
109     /* XXX: ECC not computed */
110     memset(buf, 0, 288);
111 }
112 
113 static int
114 cd_read_sector_sync(IDEState *s)
115 {
116     int ret;
117     block_acct_start(blk_get_stats(s->blk), &s->acct,
118                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
119 
120     trace_cd_read_sector_sync(s->lba);
121 
122     switch (s->cd_sector_size) {
123     case 2048:
124         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
125                         s->io_buffer, ATAPI_SECTOR_SIZE);
126         break;
127     case 2352:
128         ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS,
129                         s->io_buffer + 16, ATAPI_SECTOR_SIZE);
130         if (ret >= 0) {
131             cd_data_to_raw(s->io_buffer, s->lba);
132         }
133         break;
134     default:
135         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
136         return -EIO;
137     }
138 
139     if (ret < 0) {
140         block_acct_failed(blk_get_stats(s->blk), &s->acct);
141     } else {
142         block_acct_done(blk_get_stats(s->blk), &s->acct);
143         s->lba++;
144         s->io_buffer_index = 0;
145     }
146 
147     return ret;
148 }
149 
150 static void cd_read_sector_cb(void *opaque, int ret)
151 {
152     IDEState *s = opaque;
153 
154     trace_cd_read_sector_cb(s->lba, ret);
155 
156     if (ret < 0) {
157         block_acct_failed(blk_get_stats(s->blk), &s->acct);
158         ide_atapi_io_error(s, ret);
159         return;
160     }
161 
162     block_acct_done(blk_get_stats(s->blk), &s->acct);
163 
164     if (s->cd_sector_size == 2352) {
165         cd_data_to_raw(s->io_buffer, s->lba);
166     }
167 
168     s->lba++;
169     s->io_buffer_index = 0;
170     s->status &= ~BUSY_STAT;
171 
172     ide_atapi_cmd_reply_end(s);
173 }
174 
175 static int cd_read_sector(IDEState *s)
176 {
177     if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) {
178         block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ);
179         return -EINVAL;
180     }
181 
182     s->iov.iov_base = (s->cd_sector_size == 2352) ?
183                       s->io_buffer + 16 : s->io_buffer;
184 
185     s->iov.iov_len = ATAPI_SECTOR_SIZE;
186     qemu_iovec_init_external(&s->qiov, &s->iov, 1);
187 
188     trace_cd_read_sector(s->lba);
189 
190     block_acct_start(blk_get_stats(s->blk), &s->acct,
191                      ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ);
192 
193     ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4,
194                        cd_read_sector_cb, s);
195 
196     s->status |= BUSY_STAT;
197     return 0;
198 }
199 
200 void ide_atapi_cmd_ok(IDEState *s)
201 {
202     s->error = 0;
203     s->status = READY_STAT | SEEK_STAT;
204     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
205     ide_transfer_stop(s);
206     ide_set_irq(s->bus);
207 }
208 
209 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc)
210 {
211     trace_ide_atapi_cmd_error(s, sense_key, asc);
212     s->error = sense_key << 4;
213     s->status = READY_STAT | ERR_STAT;
214     s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
215     s->sense_key = sense_key;
216     s->asc = asc;
217     ide_transfer_stop(s);
218     ide_set_irq(s->bus);
219 }
220 
221 void ide_atapi_io_error(IDEState *s, int ret)
222 {
223     /* XXX: handle more errors */
224     if (ret == -ENOMEDIUM) {
225         ide_atapi_cmd_error(s, NOT_READY,
226                             ASC_MEDIUM_NOT_PRESENT);
227     } else {
228         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
229                             ASC_LOGICAL_BLOCK_OOR);
230     }
231 }
232 
233 static uint16_t atapi_byte_count_limit(IDEState *s)
234 {
235     uint16_t bcl;
236 
237     bcl = s->lcyl | (s->hcyl << 8);
238     if (bcl == 0xffff) {
239         return 0xfffe;
240     }
241     return bcl;
242 }
243 
244 /* The whole ATAPI transfer logic is handled in this function */
245 void ide_atapi_cmd_reply_end(IDEState *s)
246 {
247     int byte_count_limit, size, ret;
248     while (s->packet_transfer_size > 0) {
249         trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size,
250                                       s->elementary_transfer_size,
251                                       s->io_buffer_index);
252 
253         /* see if a new sector must be read */
254         if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) {
255             if (!s->elementary_transfer_size) {
256                 ret = cd_read_sector(s);
257                 if (ret < 0) {
258                     ide_atapi_io_error(s, ret);
259                 }
260                 return;
261             } else {
262                 /* rebuffering within an elementary transfer is
263                  * only possible with a sync request because we
264                  * end up with a race condition otherwise */
265                 ret = cd_read_sector_sync(s);
266                 if (ret < 0) {
267                     ide_atapi_io_error(s, ret);
268                     return;
269                 }
270             }
271         }
272         if (s->elementary_transfer_size > 0) {
273             /* there are some data left to transmit in this elementary
274                transfer */
275             size = s->cd_sector_size - s->io_buffer_index;
276             if (size > s->elementary_transfer_size)
277                 size = s->elementary_transfer_size;
278         } else {
279             /* a new transfer is needed */
280             s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO;
281             ide_set_irq(s->bus);
282             byte_count_limit = atapi_byte_count_limit(s);
283             trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit);
284             size = s->packet_transfer_size;
285             if (size > byte_count_limit) {
286                 /* byte count limit must be even if this case */
287                 if (byte_count_limit & 1)
288                     byte_count_limit--;
289                 size = byte_count_limit;
290             }
291             s->lcyl = size;
292             s->hcyl = size >> 8;
293             s->elementary_transfer_size = size;
294             /* we cannot transmit more than one sector at a time */
295             if (s->lba != -1) {
296                 if (size > (s->cd_sector_size - s->io_buffer_index))
297                     size = (s->cd_sector_size - s->io_buffer_index);
298             }
299             trace_ide_atapi_cmd_reply_end_new(s, s->status);
300         }
301         s->packet_transfer_size -= size;
302         s->elementary_transfer_size -= size;
303         s->io_buffer_index += size;
304 
305         /* Some adapters process PIO data right away.  In that case, we need
306          * to avoid mutual recursion between ide_transfer_start
307          * and ide_atapi_cmd_reply_end.
308          */
309         if (!ide_transfer_start_norecurse(s,
310                                           s->io_buffer + s->io_buffer_index - size,
311                                           size, ide_atapi_cmd_reply_end)) {
312             return;
313         }
314     }
315 
316     /* end of transfer */
317     trace_ide_atapi_cmd_reply_end_eot(s, s->status);
318     ide_atapi_cmd_ok(s);
319     ide_set_irq(s->bus);
320 }
321 
322 /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
323 static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
324 {
325     if (size > max_size)
326         size = max_size;
327     s->lba = -1; /* no sector read */
328     s->packet_transfer_size = size;
329     s->io_buffer_size = size;    /* dma: send the reply data as one chunk */
330     s->elementary_transfer_size = 0;
331 
332     if (s->atapi_dma) {
333         block_acct_start(blk_get_stats(s->blk), &s->acct, size,
334                          BLOCK_ACCT_READ);
335         s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
336         ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
337     } else {
338         s->status = READY_STAT | SEEK_STAT;
339         s->io_buffer_index = 0;
340         ide_atapi_cmd_reply_end(s);
341     }
342 }
343 
344 /* start a CD-CDROM read command */
345 static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors,
346                                    int sector_size)
347 {
348     s->lba = lba;
349     s->packet_transfer_size = nb_sectors * sector_size;
350     s->elementary_transfer_size = 0;
351     s->io_buffer_index = sector_size;
352     s->cd_sector_size = sector_size;
353 
354     ide_atapi_cmd_reply_end(s);
355 }
356 
357 static void ide_atapi_cmd_check_status(IDEState *s)
358 {
359     trace_ide_atapi_cmd_check_status(s);
360     s->error = MC_ERR | (UNIT_ATTENTION << 4);
361     s->status = ERR_STAT;
362     s->nsector = 0;
363     ide_set_irq(s->bus);
364 }
365 /* ATAPI DMA support */
366 
367 static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
368 {
369     IDEState *s = opaque;
370     int data_offset, n;
371 
372     if (ret < 0) {
373         if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
374             if (s->bus->error_status) {
375                 s->bus->dma->aiocb = NULL;
376                 return;
377             }
378             goto eot;
379         }
380     }
381 
382     if (s->io_buffer_size > 0) {
383         /*
384          * For a cdrom read sector command (s->lba != -1),
385          * adjust the lba for the next s->io_buffer_size chunk
386          * and dma the current chunk.
387          * For a command != read (s->lba == -1), just transfer
388          * the reply data.
389          */
390         if (s->lba != -1) {
391             if (s->cd_sector_size == 2352) {
392                 n = 1;
393                 cd_data_to_raw(s->io_buffer, s->lba);
394             } else {
395                 n = s->io_buffer_size >> 11;
396             }
397             s->lba += n;
398         }
399         s->packet_transfer_size -= s->io_buffer_size;
400         if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0)
401             goto eot;
402     }
403 
404     if (s->packet_transfer_size <= 0) {
405         s->status = READY_STAT | SEEK_STAT;
406         s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
407         ide_set_irq(s->bus);
408         goto eot;
409     }
410 
411     s->io_buffer_index = 0;
412     if (s->cd_sector_size == 2352) {
413         n = 1;
414         s->io_buffer_size = s->cd_sector_size;
415         data_offset = 16;
416     } else {
417         n = s->packet_transfer_size >> 11;
418         if (n > (IDE_DMA_BUF_SECTORS / 4))
419             n = (IDE_DMA_BUF_SECTORS / 4);
420         s->io_buffer_size = n * 2048;
421         data_offset = 0;
422     }
423     trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n);
424     s->bus->dma->iov.iov_base = (void *)(s->io_buffer + data_offset);
425     s->bus->dma->iov.iov_len = n * ATAPI_SECTOR_SIZE;
426     qemu_iovec_init_external(&s->bus->dma->qiov, &s->bus->dma->iov, 1);
427 
428     s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2,
429                                             &s->bus->dma->qiov, n * 4,
430                                             ide_atapi_cmd_read_dma_cb, s);
431     return;
432 
433 eot:
434     if (ret < 0) {
435         block_acct_failed(blk_get_stats(s->blk), &s->acct);
436     } else {
437         block_acct_done(blk_get_stats(s->blk), &s->acct);
438     }
439     ide_set_inactive(s, false);
440 }
441 
442 /* start a CD-CDROM read command with DMA */
443 /* XXX: test if DMA is available */
444 static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
445                                    int sector_size)
446 {
447     s->lba = lba;
448     s->packet_transfer_size = nb_sectors * sector_size;
449     s->io_buffer_size = 0;
450     s->cd_sector_size = sector_size;
451 
452     block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size,
453                      BLOCK_ACCT_READ);
454 
455     /* XXX: check if BUSY_STAT should be set */
456     s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
457     ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
458 }
459 
460 static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
461                                int sector_size)
462 {
463     trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio",
464                              lba, nb_sectors);
465     if (s->atapi_dma) {
466         ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size);
467     } else {
468         ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size);
469     }
470 }
471 
472 void ide_atapi_dma_restart(IDEState *s)
473 {
474     /*
475      * At this point we can just re-evaluate the packet command and start over.
476      * The presence of ->dma_cb callback in the pre_save ensures that the packet
477      * command has been completely sent and we can safely restart command.
478      */
479     s->unit = s->bus->retry_unit;
480     s->bus->dma->ops->restart_dma(s->bus->dma);
481     ide_atapi_cmd(s);
482 }
483 
484 static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index,
485                                             uint16_t profile)
486 {
487     uint8_t *buf_profile = buf + 12; /* start of profiles */
488 
489     buf_profile += ((*index) * 4); /* start of indexed profile */
490     cpu_to_ube16 (buf_profile, profile);
491     buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7]));
492 
493     /* each profile adds 4 bytes to the response */
494     (*index)++;
495     buf[11] += 4; /* Additional Length */
496 
497     return 4;
498 }
499 
500 static int ide_dvd_read_structure(IDEState *s, int format,
501                                   const uint8_t *packet, uint8_t *buf)
502 {
503     switch (format) {
504         case 0x0: /* Physical format information */
505             {
506                 int layer = packet[6];
507                 uint64_t total_sectors;
508 
509                 if (layer != 0)
510                     return -ASC_INV_FIELD_IN_CMD_PACKET;
511 
512                 total_sectors = s->nb_sectors >> 2;
513                 if (total_sectors == 0) {
514                     return -ASC_MEDIUM_NOT_PRESENT;
515                 }
516 
517                 buf[4] = 1;   /* DVD-ROM, part version 1 */
518                 buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */
519                 buf[6] = 1;   /* one layer, read-only (per MMC-2 spec) */
520                 buf[7] = 0;   /* default densities */
521 
522                 /* FIXME: 0x30000 per spec? */
523                 cpu_to_ube32(buf + 8, 0); /* start sector */
524                 cpu_to_ube32(buf + 12, total_sectors - 1); /* end sector */
525                 cpu_to_ube32(buf + 16, total_sectors - 1); /* l0 end sector */
526 
527                 /* Size of buffer, not including 2 byte size field */
528                 stw_be_p(buf, 2048 + 2);
529 
530                 /* 2k data + 4 byte header */
531                 return (2048 + 4);
532             }
533 
534         case 0x01: /* DVD copyright information */
535             buf[4] = 0; /* no copyright data */
536             buf[5] = 0; /* no region restrictions */
537 
538             /* Size of buffer, not including 2 byte size field */
539             stw_be_p(buf, 4 + 2);
540 
541             /* 4 byte header + 4 byte data */
542             return (4 + 4);
543 
544         case 0x03: /* BCA information - invalid field for no BCA info */
545             return -ASC_INV_FIELD_IN_CMD_PACKET;
546 
547         case 0x04: /* DVD disc manufacturing information */
548             /* Size of buffer, not including 2 byte size field */
549             stw_be_p(buf, 2048 + 2);
550 
551             /* 2k data + 4 byte header */
552             return (2048 + 4);
553 
554         case 0xff:
555             /*
556              * This lists all the command capabilities above.  Add new ones
557              * in order and update the length and buffer return values.
558              */
559 
560             buf[4] = 0x00; /* Physical format */
561             buf[5] = 0x40; /* Not writable, is readable */
562             stw_be_p(buf + 6, 2048 + 4);
563 
564             buf[8] = 0x01; /* Copyright info */
565             buf[9] = 0x40; /* Not writable, is readable */
566             stw_be_p(buf + 10, 4 + 4);
567 
568             buf[12] = 0x03; /* BCA info */
569             buf[13] = 0x40; /* Not writable, is readable */
570             stw_be_p(buf + 14, 188 + 4);
571 
572             buf[16] = 0x04; /* Manufacturing info */
573             buf[17] = 0x40; /* Not writable, is readable */
574             stw_be_p(buf + 18, 2048 + 4);
575 
576             /* Size of buffer, not including 2 byte size field */
577             stw_be_p(buf, 16 + 2);
578 
579             /* data written + 4 byte header */
580             return (16 + 4);
581 
582         default: /* TODO: formats beyond DVD-ROM requires */
583             return -ASC_INV_FIELD_IN_CMD_PACKET;
584     }
585 }
586 
587 static unsigned int event_status_media(IDEState *s,
588                                        uint8_t *buf)
589 {
590     uint8_t event_code, media_status;
591 
592     media_status = 0;
593     if (s->tray_open) {
594         media_status = MS_TRAY_OPEN;
595     } else if (blk_is_inserted(s->blk)) {
596         media_status = MS_MEDIA_PRESENT;
597     }
598 
599     /* Event notification descriptor */
600     event_code = MEC_NO_CHANGE;
601     if (media_status != MS_TRAY_OPEN) {
602         if (s->events.new_media) {
603             event_code = MEC_NEW_MEDIA;
604             s->events.new_media = false;
605         } else if (s->events.eject_request) {
606             event_code = MEC_EJECT_REQUESTED;
607             s->events.eject_request = false;
608         }
609     }
610 
611     buf[4] = event_code;
612     buf[5] = media_status;
613 
614     /* These fields are reserved, just clear them. */
615     buf[6] = 0;
616     buf[7] = 0;
617 
618     return 8; /* We wrote to 4 extra bytes from the header */
619 }
620 
621 /*
622  * Before transferring data or otherwise signalling acceptance of a command
623  * marked CONDDATA, we must check the validity of the byte_count_limit.
624  */
625 static bool validate_bcl(IDEState *s)
626 {
627     /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */
628     if (s->atapi_dma || atapi_byte_count_limit(s)) {
629         return true;
630     }
631 
632     /* TODO: Move abort back into core.c and introduce proper error flow between
633      *       ATAPI layer and IDE core layer */
634     ide_abort_command(s);
635     return false;
636 }
637 
638 static void cmd_get_event_status_notification(IDEState *s,
639                                               uint8_t *buf)
640 {
641     const uint8_t *packet = buf;
642 
643     struct {
644         uint8_t opcode;
645         uint8_t polled;        /* lsb bit is polled; others are reserved */
646         uint8_t reserved2[2];
647         uint8_t class;
648         uint8_t reserved3[2];
649         uint16_t len;
650         uint8_t control;
651     } QEMU_PACKED *gesn_cdb;
652 
653     struct {
654         uint16_t len;
655         uint8_t notification_class;
656         uint8_t supported_events;
657     } QEMU_PACKED *gesn_event_header;
658     unsigned int max_len, used_len;
659 
660     gesn_cdb = (void *)packet;
661     gesn_event_header = (void *)buf;
662 
663     max_len = be16_to_cpu(gesn_cdb->len);
664 
665     /* It is fine by the MMC spec to not support async mode operations */
666     if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */
667         /* Only polling is supported, asynchronous mode is not. */
668         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
669                             ASC_INV_FIELD_IN_CMD_PACKET);
670         return;
671     }
672 
673     /* polling mode operation */
674 
675     /*
676      * These are the supported events.
677      *
678      * We currently only support requests of the 'media' type.
679      * Notification class requests and supported event classes are bitmasks,
680      * but they are build from the same values as the "notification class"
681      * field.
682      */
683     gesn_event_header->supported_events = 1 << GESN_MEDIA;
684 
685     /*
686      * We use |= below to set the class field; other bits in this byte
687      * are reserved now but this is useful to do if we have to use the
688      * reserved fields later.
689      */
690     gesn_event_header->notification_class = 0;
691 
692     /*
693      * Responses to requests are to be based on request priority.  The
694      * notification_class_request_type enum above specifies the
695      * priority: upper elements are higher prio than lower ones.
696      */
697     if (gesn_cdb->class & (1 << GESN_MEDIA)) {
698         gesn_event_header->notification_class |= GESN_MEDIA;
699         used_len = event_status_media(s, buf);
700     } else {
701         gesn_event_header->notification_class = 0x80; /* No event available */
702         used_len = sizeof(*gesn_event_header);
703     }
704     gesn_event_header->len = cpu_to_be16(used_len
705                                          - sizeof(*gesn_event_header));
706     ide_atapi_cmd_reply(s, used_len, max_len);
707 }
708 
709 static void cmd_request_sense(IDEState *s, uint8_t *buf)
710 {
711     int max_len = buf[4];
712 
713     memset(buf, 0, 18);
714     buf[0] = 0x70 | (1 << 7);
715     buf[2] = s->sense_key;
716     buf[7] = 10;
717     buf[12] = s->asc;
718 
719     if (s->sense_key == UNIT_ATTENTION) {
720         s->sense_key = NO_SENSE;
721     }
722 
723     ide_atapi_cmd_reply(s, 18, max_len);
724 }
725 
726 static void cmd_inquiry(IDEState *s, uint8_t *buf)
727 {
728     uint8_t page_code = buf[2];
729     int max_len = buf[4];
730 
731     unsigned idx = 0;
732     unsigned size_idx;
733     unsigned preamble_len;
734 
735     /* If the EVPD (Enable Vital Product Data) bit is set in byte 1,
736      * we are being asked for a specific page of info indicated by byte 2. */
737     if (buf[1] & 0x01) {
738         preamble_len = 4;
739         size_idx = 3;
740 
741         buf[idx++] = 0x05;      /* CD-ROM */
742         buf[idx++] = page_code; /* Page Code */
743         buf[idx++] = 0x00;      /* reserved */
744         idx++;                  /* length (set later) */
745 
746         switch (page_code) {
747         case 0x00:
748             /* Supported Pages: List of supported VPD responses. */
749             buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */
750             buf[idx++] = 0x83; /* 0x83: Device Identification. */
751             break;
752 
753         case 0x83:
754             /* Device Identification. Each entry is optional, but the entries
755              * included here are modeled after libata's VPD responses.
756              * If the response is given, at least one entry must be present. */
757 
758             /* Entry 1: Serial */
759             if (idx + 24 > max_len) {
760                 /* Not enough room for even the first entry: */
761                 /* 4 byte header + 20 byte string */
762                 ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
763                                     ASC_DATA_PHASE_ERROR);
764                 return;
765             }
766             buf[idx++] = 0x02; /* Ascii */
767             buf[idx++] = 0x00; /* Vendor Specific */
768             buf[idx++] = 0x00;
769             buf[idx++] = 20;   /* Remaining length */
770             padstr8(buf + idx, 20, s->drive_serial_str);
771             idx += 20;
772 
773             /* Entry 2: Drive Model and Serial */
774             if (idx + 72 > max_len) {
775                 /* 4 (header) + 8 (vendor) + 60 (model & serial) */
776                 goto out;
777             }
778             buf[idx++] = 0x02; /* Ascii */
779             buf[idx++] = 0x01; /* T10 Vendor */
780             buf[idx++] = 0x00;
781             buf[idx++] = 68;
782             padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */
783             idx += 8;
784             padstr8(buf + idx, 40, s->drive_model_str);
785             idx += 40;
786             padstr8(buf + idx, 20, s->drive_serial_str);
787             idx += 20;
788 
789             /* Entry 3: WWN */
790             if (s->wwn && (idx + 12 <= max_len)) {
791                 /* 4 byte header + 8 byte wwn */
792                 buf[idx++] = 0x01; /* Binary */
793                 buf[idx++] = 0x03; /* NAA */
794                 buf[idx++] = 0x00;
795                 buf[idx++] = 0x08;
796                 stq_be_p(&buf[idx], s->wwn);
797                 idx += 8;
798             }
799             break;
800 
801         default:
802             /* SPC-3, revision 23 sec. 6.4 */
803             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
804                                 ASC_INV_FIELD_IN_CMD_PACKET);
805             return;
806         }
807     } else {
808         preamble_len = 5;
809         size_idx = 4;
810 
811         buf[0] = 0x05; /* CD-ROM */
812         buf[1] = 0x80; /* removable */
813         buf[2] = 0x00; /* ISO */
814         buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */
815         /* buf[size_idx] set below. */
816         buf[5] = 0;    /* reserved */
817         buf[6] = 0;    /* reserved */
818         buf[7] = 0;    /* reserved */
819         padstr8(buf + 8, 8, "QEMU");
820         padstr8(buf + 16, 16, "QEMU DVD-ROM");
821         padstr8(buf + 32, 4, s->version);
822         idx = 36;
823     }
824 
825  out:
826     buf[size_idx] = idx - preamble_len;
827     ide_atapi_cmd_reply(s, idx, max_len);
828 }
829 
830 static void cmd_get_configuration(IDEState *s, uint8_t *buf)
831 {
832     uint32_t len;
833     uint8_t index = 0;
834     int max_len;
835 
836     /* only feature 0 is supported */
837     if (buf[2] != 0 || buf[3] != 0) {
838         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
839                             ASC_INV_FIELD_IN_CMD_PACKET);
840         return;
841     }
842 
843     /* XXX: could result in alignment problems in some architectures */
844     max_len = ube16_to_cpu(buf + 7);
845 
846     /*
847      * XXX: avoid overflow for io_buffer if max_len is bigger than
848      *      the size of that buffer (dimensioned to max number of
849      *      sectors to transfer at once)
850      *
851      *      Only a problem if the feature/profiles grow.
852      */
853     if (max_len > 512) {
854         /* XXX: assume 1 sector */
855         max_len = 512;
856     }
857 
858     memset(buf, 0, max_len);
859     /*
860      * the number of sectors from the media tells us which profile
861      * to use as current.  0 means there is no media
862      */
863     if (media_is_dvd(s)) {
864         cpu_to_ube16(buf + 6, MMC_PROFILE_DVD_ROM);
865     } else if (media_is_cd(s)) {
866         cpu_to_ube16(buf + 6, MMC_PROFILE_CD_ROM);
867     }
868 
869     buf[10] = 0x02 | 0x01; /* persistent and current */
870     len = 12; /* headers: 8 + 4 */
871     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM);
872     len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM);
873     cpu_to_ube32(buf, len - 4); /* data length */
874 
875     ide_atapi_cmd_reply(s, len, max_len);
876 }
877 
878 static void cmd_mode_sense(IDEState *s, uint8_t *buf)
879 {
880     int action, code;
881     int max_len;
882 
883     max_len = ube16_to_cpu(buf + 7);
884     action = buf[2] >> 6;
885     code = buf[2] & 0x3f;
886 
887     switch(action) {
888     case 0: /* current values */
889         switch(code) {
890         case MODE_PAGE_R_W_ERROR: /* error recovery */
891             cpu_to_ube16(&buf[0], 16 - 2);
892             buf[2] = 0x70;
893             buf[3] = 0;
894             buf[4] = 0;
895             buf[5] = 0;
896             buf[6] = 0;
897             buf[7] = 0;
898 
899             buf[8] = MODE_PAGE_R_W_ERROR;
900             buf[9] = 16 - 10;
901             buf[10] = 0x00;
902             buf[11] = 0x05;
903             buf[12] = 0x00;
904             buf[13] = 0x00;
905             buf[14] = 0x00;
906             buf[15] = 0x00;
907             ide_atapi_cmd_reply(s, 16, max_len);
908             break;
909         case MODE_PAGE_AUDIO_CTL:
910             cpu_to_ube16(&buf[0], 24 - 2);
911             buf[2] = 0x70;
912             buf[3] = 0;
913             buf[4] = 0;
914             buf[5] = 0;
915             buf[6] = 0;
916             buf[7] = 0;
917 
918             buf[8] = MODE_PAGE_AUDIO_CTL;
919             buf[9] = 24 - 10;
920             /* Fill with CDROM audio volume */
921             buf[17] = 0;
922             buf[19] = 0;
923             buf[21] = 0;
924             buf[23] = 0;
925 
926             ide_atapi_cmd_reply(s, 24, max_len);
927             break;
928         case MODE_PAGE_CAPABILITIES:
929             cpu_to_ube16(&buf[0], 30 - 2);
930             buf[2] = 0x70;
931             buf[3] = 0;
932             buf[4] = 0;
933             buf[5] = 0;
934             buf[6] = 0;
935             buf[7] = 0;
936 
937             buf[8] = MODE_PAGE_CAPABILITIES;
938             buf[9] = 30 - 10;
939             buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */
940             buf[11] = 0x00;
941 
942             /* Claim PLAY_AUDIO capability (0x01) since some Linux
943                code checks for this to automount media. */
944             buf[12] = 0x71;
945             buf[13] = 3 << 5;
946             buf[14] = (1 << 0) | (1 << 3) | (1 << 5);
947             if (s->tray_locked) {
948                 buf[14] |= 1 << 1;
949             }
950             buf[15] = 0x00; /* No volume & mute control, no changer */
951             cpu_to_ube16(&buf[16], 704); /* 4x read speed */
952             buf[18] = 0; /* Two volume levels */
953             buf[19] = 2;
954             cpu_to_ube16(&buf[20], 512); /* 512k buffer */
955             cpu_to_ube16(&buf[22], 704); /* 4x read speed current */
956             buf[24] = 0;
957             buf[25] = 0;
958             buf[26] = 0;
959             buf[27] = 0;
960             buf[28] = 0;
961             buf[29] = 0;
962             ide_atapi_cmd_reply(s, 30, max_len);
963             break;
964         default:
965             goto error_cmd;
966         }
967         break;
968     case 1: /* changeable values */
969         goto error_cmd;
970     case 2: /* default values */
971         goto error_cmd;
972     default:
973     case 3: /* saved values */
974         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
975                             ASC_SAVING_PARAMETERS_NOT_SUPPORTED);
976         break;
977     }
978     return;
979 
980 error_cmd:
981     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET);
982 }
983 
984 static void cmd_test_unit_ready(IDEState *s, uint8_t *buf)
985 {
986     /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we
987      * come here, we know that it's ready. */
988     ide_atapi_cmd_ok(s);
989 }
990 
991 static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf)
992 {
993     s->tray_locked = buf[4] & 1;
994     blk_lock_medium(s->blk, buf[4] & 1);
995     ide_atapi_cmd_ok(s);
996 }
997 
998 static void cmd_read(IDEState *s, uint8_t* buf)
999 {
1000     int nb_sectors, lba;
1001 
1002     if (buf[0] == GPCMD_READ_10) {
1003         nb_sectors = ube16_to_cpu(buf + 7);
1004     } else {
1005         nb_sectors = ube32_to_cpu(buf + 6);
1006     }
1007 
1008     lba = ube32_to_cpu(buf + 2);
1009     if (nb_sectors == 0) {
1010         ide_atapi_cmd_ok(s);
1011         return;
1012     }
1013 
1014     ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1015 }
1016 
1017 static void cmd_read_cd(IDEState *s, uint8_t* buf)
1018 {
1019     int nb_sectors, lba, transfer_request;
1020 
1021     nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8];
1022     lba = ube32_to_cpu(buf + 2);
1023 
1024     if (nb_sectors == 0) {
1025         ide_atapi_cmd_ok(s);
1026         return;
1027     }
1028 
1029     transfer_request = buf[9] & 0xf8;
1030     if (transfer_request == 0x00) {
1031         /* nothing */
1032         ide_atapi_cmd_ok(s);
1033         return;
1034     }
1035 
1036     /* Check validity of BCL before transferring data */
1037     if (!validate_bcl(s)) {
1038         return;
1039     }
1040 
1041     switch (transfer_request) {
1042     case 0x10:
1043         /* normal read */
1044         ide_atapi_cmd_read(s, lba, nb_sectors, 2048);
1045         break;
1046     case 0xf8:
1047         /* read all data */
1048         ide_atapi_cmd_read(s, lba, nb_sectors, 2352);
1049         break;
1050     default:
1051         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1052                             ASC_INV_FIELD_IN_CMD_PACKET);
1053         break;
1054     }
1055 }
1056 
1057 static void cmd_seek(IDEState *s, uint8_t* buf)
1058 {
1059     unsigned int lba;
1060     uint64_t total_sectors = s->nb_sectors >> 2;
1061 
1062     lba = ube32_to_cpu(buf + 2);
1063     if (lba >= total_sectors) {
1064         ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR);
1065         return;
1066     }
1067 
1068     ide_atapi_cmd_ok(s);
1069 }
1070 
1071 static void cmd_start_stop_unit(IDEState *s, uint8_t* buf)
1072 {
1073     int sense;
1074     bool start = buf[4] & 1;
1075     bool loej = buf[4] & 2;     /* load on start, eject on !start */
1076     int pwrcnd = buf[4] & 0xf0;
1077 
1078     if (pwrcnd) {
1079         /* eject/load only happens for power condition == 0 */
1080         ide_atapi_cmd_ok(s);
1081         return;
1082     }
1083 
1084     if (loej) {
1085         if (!start && !s->tray_open && s->tray_locked) {
1086             sense = blk_is_inserted(s->blk)
1087                 ? NOT_READY : ILLEGAL_REQUEST;
1088             ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED);
1089             return;
1090         }
1091 
1092         if (s->tray_open != !start) {
1093             blk_eject(s->blk, !start);
1094             s->tray_open = !start;
1095         }
1096     }
1097 
1098     ide_atapi_cmd_ok(s);
1099 }
1100 
1101 static void cmd_mechanism_status(IDEState *s, uint8_t* buf)
1102 {
1103     int max_len = ube16_to_cpu(buf + 8);
1104 
1105     cpu_to_ube16(buf, 0);
1106     /* no current LBA */
1107     buf[2] = 0;
1108     buf[3] = 0;
1109     buf[4] = 0;
1110     buf[5] = 1;
1111     cpu_to_ube16(buf + 6, 0);
1112     ide_atapi_cmd_reply(s, 8, max_len);
1113 }
1114 
1115 static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf)
1116 {
1117     int format, msf, start_track, len;
1118     int max_len;
1119     uint64_t total_sectors = s->nb_sectors >> 2;
1120 
1121     max_len = ube16_to_cpu(buf + 7);
1122     format = buf[9] >> 6;
1123     msf = (buf[1] >> 1) & 1;
1124     start_track = buf[6];
1125 
1126     switch(format) {
1127     case 0:
1128         len = cdrom_read_toc(total_sectors, buf, msf, start_track);
1129         if (len < 0)
1130             goto error_cmd;
1131         ide_atapi_cmd_reply(s, len, max_len);
1132         break;
1133     case 1:
1134         /* multi session : only a single session defined */
1135         memset(buf, 0, 12);
1136         buf[1] = 0x0a;
1137         buf[2] = 0x01;
1138         buf[3] = 0x01;
1139         ide_atapi_cmd_reply(s, 12, max_len);
1140         break;
1141     case 2:
1142         len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track);
1143         if (len < 0)
1144             goto error_cmd;
1145         ide_atapi_cmd_reply(s, len, max_len);
1146         break;
1147     default:
1148     error_cmd:
1149         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1150                             ASC_INV_FIELD_IN_CMD_PACKET);
1151     }
1152 }
1153 
1154 static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf)
1155 {
1156     uint64_t total_sectors = s->nb_sectors >> 2;
1157 
1158     /* NOTE: it is really the number of sectors minus 1 */
1159     cpu_to_ube32(buf, total_sectors - 1);
1160     cpu_to_ube32(buf + 4, 2048);
1161     ide_atapi_cmd_reply(s, 8, 8);
1162 }
1163 
1164 static void cmd_read_disc_information(IDEState *s, uint8_t* buf)
1165 {
1166     uint8_t type = buf[1] & 7;
1167     uint32_t max_len = ube16_to_cpu(buf + 7);
1168 
1169     /* Types 1/2 are only defined for Blu-Ray.  */
1170     if (type != 0) {
1171         ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1172                             ASC_INV_FIELD_IN_CMD_PACKET);
1173         return;
1174     }
1175 
1176     memset(buf, 0, 34);
1177     buf[1] = 32;
1178     buf[2] = 0xe; /* last session complete, disc finalized */
1179     buf[3] = 1;   /* first track on disc */
1180     buf[4] = 1;   /* # of sessions */
1181     buf[5] = 1;   /* first track of last session */
1182     buf[6] = 1;   /* last track of last session */
1183     buf[7] = 0x20; /* unrestricted use */
1184     buf[8] = 0x00; /* CD-ROM or DVD-ROM */
1185     /* 9-10-11: most significant byte corresponding bytes 4-5-6 */
1186     /* 12-23: not meaningful for CD-ROM or DVD-ROM */
1187     /* 24-31: disc bar code */
1188     /* 32: disc application code */
1189     /* 33: number of OPC tables */
1190 
1191     ide_atapi_cmd_reply(s, 34, max_len);
1192 }
1193 
1194 static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf)
1195 {
1196     int max_len;
1197     int media = buf[1];
1198     int format = buf[7];
1199     int ret;
1200 
1201     max_len = ube16_to_cpu(buf + 8);
1202 
1203     if (format < 0xff) {
1204         if (media_is_cd(s)) {
1205             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1206                                 ASC_INCOMPATIBLE_FORMAT);
1207             return;
1208         } else if (!media_present(s)) {
1209             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1210                                 ASC_INV_FIELD_IN_CMD_PACKET);
1211             return;
1212         }
1213     }
1214 
1215     memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * 512 + 4 ?
1216            IDE_DMA_BUF_SECTORS * 512 + 4 : max_len);
1217 
1218     switch (format) {
1219         case 0x00 ... 0x7f:
1220         case 0xff:
1221             if (media == 0) {
1222                 ret = ide_dvd_read_structure(s, format, buf, buf);
1223 
1224                 if (ret < 0) {
1225                     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret);
1226                 } else {
1227                     ide_atapi_cmd_reply(s, ret, max_len);
1228                 }
1229 
1230                 break;
1231             }
1232             /* TODO: BD support, fall through for now */
1233 
1234         /* Generic disk structures */
1235         case 0x80: /* TODO: AACS volume identifier */
1236         case 0x81: /* TODO: AACS media serial number */
1237         case 0x82: /* TODO: AACS media identifier */
1238         case 0x83: /* TODO: AACS media key block */
1239         case 0x90: /* TODO: List of recognized format layers */
1240         case 0xc0: /* TODO: Write protection status */
1241         default:
1242             ide_atapi_cmd_error(s, ILLEGAL_REQUEST,
1243                                 ASC_INV_FIELD_IN_CMD_PACKET);
1244             break;
1245     }
1246 }
1247 
1248 static void cmd_set_speed(IDEState *s, uint8_t* buf)
1249 {
1250     ide_atapi_cmd_ok(s);
1251 }
1252 
1253 enum {
1254     /*
1255      * Only commands flagged as ALLOW_UA are allowed to run under a
1256      * unit attention condition. (See MMC-5, section 4.1.6.1)
1257      */
1258     ALLOW_UA = 0x01,
1259 
1260     /*
1261      * Commands flagged with CHECK_READY can only execute if a medium is present.
1262      * Otherwise they report the Not Ready Condition. (See MMC-5, section
1263      * 4.1.8)
1264      */
1265     CHECK_READY = 0x02,
1266 
1267     /*
1268      * Commands flagged with NONDATA do not in any circumstances return
1269      * any data via ide_atapi_cmd_reply. These commands are exempt from
1270      * the normal byte_count_limit constraints.
1271      * See ATA8-ACS3 "7.21.5 Byte Count Limit"
1272      */
1273     NONDATA = 0x04,
1274 
1275     /*
1276      * CONDDATA implies a command that transfers data only conditionally based
1277      * on the presence of suboptions. It should be exempt from the BCL check at
1278      * command validation time, but it needs to be checked at the command
1279      * handler level instead.
1280      */
1281     CONDDATA = 0x08,
1282 };
1283 
1284 static const struct AtapiCmd {
1285     void (*handler)(IDEState *s, uint8_t *buf);
1286     int flags;
1287 } atapi_cmd_table[0x100] = {
1288     [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
1289     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
1290     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
1291     [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
1292     [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
1293     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
1294     [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
1295     [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
1296     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
1297     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
1298     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
1299     [ 0x51 ] = { cmd_read_disc_information,         CHECK_READY },
1300     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
1301     [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
1302     [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
1303     [ 0xbb ] = { cmd_set_speed,                     NONDATA },
1304     [ 0xbd ] = { cmd_mechanism_status,              0 },
1305     [ 0xbe ] = { cmd_read_cd,                       CHECK_READY | CONDDATA },
1306     /* [1] handler detects and reports not ready condition itself */
1307 };
1308 
1309 void ide_atapi_cmd(IDEState *s)
1310 {
1311     uint8_t *buf = s->io_buffer;
1312     const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]];
1313 
1314     trace_ide_atapi_cmd(s, s->io_buffer[0]);
1315 
1316     if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) {
1317         /* Each pretty-printed byte needs two bytes and a space; */
1318         char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1);
1319         int i;
1320         for (i = 0; i < ATAPI_PACKET_SIZE; i++) {
1321             sprintf(ppacket + (i * 3), "%02x ", buf[i]);
1322         }
1323         trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket);
1324         g_free(ppacket);
1325     }
1326 
1327     /*
1328      * If there's a UNIT_ATTENTION condition pending, only command flagged with
1329      * ALLOW_UA are allowed to complete. with other commands getting a CHECK
1330      * condition response unless a higher priority status, defined by the drive
1331      * here, is pending.
1332      */
1333     if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) {
1334         ide_atapi_cmd_check_status(s);
1335         return;
1336     }
1337     /*
1338      * When a CD gets changed, we have to report an ejected state and
1339      * then a loaded state to guests so that they detect tray
1340      * open/close and media change events.  Guests that do not use
1341      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
1342      * states rely on this behavior.
1343      */
1344     if (!(cmd->flags & ALLOW_UA) &&
1345         !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) {
1346 
1347         if (s->cdrom_changed == 1) {
1348             ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1349             s->cdrom_changed = 2;
1350         } else {
1351             ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED);
1352             s->cdrom_changed = 0;
1353         }
1354 
1355         return;
1356     }
1357 
1358     /* Report a Not Ready condition if appropriate for the command */
1359     if ((cmd->flags & CHECK_READY) &&
1360         (!media_present(s) || !blk_is_inserted(s->blk)))
1361     {
1362         ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT);
1363         return;
1364     }
1365 
1366     /* Commands that don't transfer DATA permit the byte_count_limit to be 0.
1367      * If this is a data-transferring PIO command and BCL is 0,
1368      * we abort at the /ATA/ level, not the ATAPI level.
1369      * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
1370     if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) {
1371         if (!validate_bcl(s)) {
1372             return;
1373         }
1374     }
1375 
1376     /* Execute the command */
1377     if (cmd->handler) {
1378         cmd->handler(s, buf);
1379         return;
1380     }
1381 
1382     ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE);
1383 }
1384