xref: /qemu/hw/input/pckbd.c (revision f6f57a82)

/*
 * QEMU PC keyboard emulation
 *
 * Copyright (c) 2003 Fabrice Bellard
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/timer.h"
#include "hw/isa/isa.h"
#include "migration/vmstate.h"
#include "hw/acpi/aml-build.h"
#include "hw/input/ps2.h"
#include "hw/irq.h"
#include "hw/input/i8042.h"
#include "hw/qdev-properties.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"

#include "trace.h"

/*	Keyboard Controller Commands */
#define KBD_CCMD_READ_MODE	0x20	/* Read mode bits */
#define KBD_CCMD_WRITE_MODE	0x60	/* Write mode bits */
#define KBD_CCMD_GET_VERSION	0xA1	/* Get controller version */
#define KBD_CCMD_MOUSE_DISABLE	0xA7	/* Disable mouse interface */
#define KBD_CCMD_MOUSE_ENABLE	0xA8	/* Enable mouse interface */
#define KBD_CCMD_TEST_MOUSE	0xA9	/* Mouse interface test */
#define KBD_CCMD_SELF_TEST	0xAA	/* Controller self test */
#define KBD_CCMD_KBD_TEST	0xAB	/* Keyboard interface test */
#define KBD_CCMD_KBD_DISABLE	0xAD	/* Keyboard interface disable */
#define KBD_CCMD_KBD_ENABLE	0xAE	/* Keyboard interface enable */
#define KBD_CCMD_READ_INPORT    0xC0    /* read input port */
#define KBD_CCMD_READ_OUTPORT	0xD0    /* read output port */
#define KBD_CCMD_WRITE_OUTPORT	0xD1    /* write output port */
#define KBD_CCMD_WRITE_OBUF	0xD2
#define KBD_CCMD_WRITE_AUX_OBUF	0xD3    /* Write to output buffer as if
                                           initiated by the auxiliary device */
#define KBD_CCMD_WRITE_MOUSE	0xD4	/* Write the following byte to the mouse */
#define KBD_CCMD_DISABLE_A20    0xDD    /* HP vectra only ? */
#define KBD_CCMD_ENABLE_A20     0xDF    /* HP vectra only ? */
#define KBD_CCMD_PULSE_BITS_3_0 0xF0    /* Pulse bits 3-0 of the output port P2. */
#define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
#define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */

/* Keyboard Commands */
#define KBD_CMD_SET_LEDS	0xED	/* Set keyboard leds */
#define KBD_CMD_ECHO     	0xEE
#define KBD_CMD_GET_ID 	        0xF2	/* get keyboard ID */
#define KBD_CMD_SET_RATE	0xF3	/* Set typematic rate */
#define KBD_CMD_ENABLE		0xF4	/* Enable scanning */
#define KBD_CMD_RESET_DISABLE	0xF5	/* reset and disable scanning */
#define KBD_CMD_RESET_ENABLE   	0xF6    /* reset and enable scanning */
#define KBD_CMD_RESET		0xFF	/* Reset */

/* Keyboard Replies */
#define KBD_REPLY_POR		0xAA	/* Power on reset */
#define KBD_REPLY_ACK		0xFA	/* Command ACK */
#define KBD_REPLY_RESEND	0xFE	/* Command NACK, send the cmd again */

/* Status Register Bits */
#define KBD_STAT_OBF 		0x01	/* Keyboard output buffer full */
#define KBD_STAT_IBF 		0x02	/* Keyboard input buffer full */
#define KBD_STAT_SELFTEST	0x04	/* Self test successful */
#define KBD_STAT_CMD		0x08	/* Last write was a command write (0=data) */
#define KBD_STAT_UNLOCKED	0x10	/* Zero if keyboard locked */
#define KBD_STAT_MOUSE_OBF	0x20	/* Mouse output buffer full */
#define KBD_STAT_GTO 		0x40	/* General receive/xmit timeout */
#define KBD_STAT_PERR 		0x80	/* Parity error */

/* Controller Mode Register Bits */
#define KBD_MODE_KBD_INT	0x01	/* Keyboard data generate IRQ1 */
#define KBD_MODE_MOUSE_INT	0x02	/* Mouse data generate IRQ12 */
#define KBD_MODE_SYS 		0x04	/* The system flag (?) */
#define KBD_MODE_NO_KEYLOCK	0x08	/* The keylock doesn't affect the keyboard if set */
#define KBD_MODE_DISABLE_KBD	0x10	/* Disable keyboard interface */
#define KBD_MODE_DISABLE_MOUSE	0x20	/* Disable mouse interface */
#define KBD_MODE_KCC 		0x40	/* Scan code conversion to PC format */
#define KBD_MODE_RFU		0x80

/* Output Port Bits */
#define KBD_OUT_RESET           0x01    /* 1=normal mode, 0=reset */
#define KBD_OUT_A20             0x02    /* x86 only */
#define KBD_OUT_OBF             0x10    /* Keyboard output buffer full */
#define KBD_OUT_MOUSE_OBF       0x20    /* Mouse output buffer full */

/* OSes typically write 0xdd/0xdf to turn the A20 line off and on.
 * We make the default value of the outport include these four bits,
 * so that the subsection is rarely necessary.
 */
#define KBD_OUT_ONES            0xcc

/* Mouse Commands */
#define AUX_SET_SCALE11		0xE6	/* Set 1:1 scaling */
#define AUX_SET_SCALE21		0xE7	/* Set 2:1 scaling */
#define AUX_SET_RES		0xE8	/* Set resolution */
#define AUX_GET_SCALE		0xE9	/* Get scaling factor */
#define AUX_SET_STREAM		0xEA	/* Set stream mode */
#define AUX_POLL		0xEB	/* Poll */
#define AUX_RESET_WRAP		0xEC	/* Reset wrap mode */
#define AUX_SET_WRAP		0xEE	/* Set wrap mode */
#define AUX_SET_REMOTE		0xF0	/* Set remote mode */
#define AUX_GET_TYPE		0xF2	/* Get type */
#define AUX_SET_SAMPLE		0xF3	/* Set sample rate */
#define AUX_ENABLE_DEV		0xF4	/* Enable aux device */
#define AUX_DISABLE_DEV		0xF5	/* Disable aux device */
#define AUX_SET_DEFAULT		0xF6
#define AUX_RESET		0xFF	/* Reset aux device */
#define AUX_ACK			0xFA	/* Command byte ACK. */

#define MOUSE_STATUS_REMOTE     0x40
#define MOUSE_STATUS_ENABLED    0x20
#define MOUSE_STATUS_SCALE21    0x10

#define KBD_PENDING_KBD_COMPAT  0x01
#define KBD_PENDING_AUX_COMPAT  0x02
#define KBD_PENDING_CTRL_KBD    0x04
#define KBD_PENDING_CTRL_AUX    0x08
#define KBD_PENDING_KBD         KBD_MODE_DISABLE_KBD    /* 0x10 */
#define KBD_PENDING_AUX         KBD_MODE_DISABLE_MOUSE  /* 0x20 */

#define KBD_MIGR_TIMER_PENDING  0x1

#define KBD_OBSRC_KBD           0x01
#define KBD_OBSRC_MOUSE         0x02
#define KBD_OBSRC_CTRL          0x04

typedef struct KBDState {
    uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
    uint8_t status;
    uint8_t mode;
    uint8_t outport;
    uint32_t migration_flags;
    uint32_t obsrc;
    bool outport_present;
    bool extended_state;
    bool extended_state_loaded;
    /* Bitmask of devices with data available.  */
    uint8_t pending;
    uint8_t obdata;
    uint8_t cbdata;
    uint8_t pending_tmp;
    void *kbd;
    void *mouse;
    QEMUTimer *throttle_timer;

    qemu_irq irq_kbd;
    qemu_irq irq_mouse;
    qemu_irq a20_out;
    hwaddr mask;
} KBDState;

/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
   incorrect, but it avoids having to simulate exact delays */
static void kbd_update_irq_lines(KBDState *s)
{
    int irq_kbd_level, irq_mouse_level;

    irq_kbd_level = 0;
    irq_mouse_level = 0;

    if (s->status & KBD_STAT_OBF) {
        if (s->status & KBD_STAT_MOUSE_OBF) {
            if (s->mode & KBD_MODE_MOUSE_INT) {
                irq_mouse_level = 1;
            }
        } else {
            if ((s->mode & KBD_MODE_KBD_INT) &&
                !(s->mode & KBD_MODE_DISABLE_KBD)) {
                irq_kbd_level = 1;
            }
        }
    }
    qemu_set_irq(s->irq_kbd, irq_kbd_level);
    qemu_set_irq(s->irq_mouse, irq_mouse_level);
}

static void kbd_deassert_irq(KBDState *s)
{
    s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
    s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
    kbd_update_irq_lines(s);
}

static uint8_t kbd_pending(KBDState *s)
{
    if (s->extended_state) {
        return s->pending & (~s->mode | ~(KBD_PENDING_KBD | KBD_PENDING_AUX));
    } else {
        return s->pending;
    }
}

/* update irq and KBD_STAT_[MOUSE_]OBF */
static void kbd_update_irq(KBDState *s)
{
    uint8_t pending = kbd_pending(s);

    s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
    s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
    if (pending) {
        s->status |= KBD_STAT_OBF;
        s->outport |= KBD_OUT_OBF;
        if (pending & KBD_PENDING_CTRL_KBD) {
            s->obsrc = KBD_OBSRC_CTRL;
        } else if (pending & KBD_PENDING_CTRL_AUX) {
            s->status |= KBD_STAT_MOUSE_OBF;
            s->outport |= KBD_OUT_MOUSE_OBF;
            s->obsrc = KBD_OBSRC_CTRL;
        } else if (pending & KBD_PENDING_KBD) {
            s->obsrc = KBD_OBSRC_KBD;
        } else {
            s->status |= KBD_STAT_MOUSE_OBF;
            s->outport |= KBD_OUT_MOUSE_OBF;
            s->obsrc = KBD_OBSRC_MOUSE;
        }
    }
    kbd_update_irq_lines(s);
}

static void kbd_safe_update_irq(KBDState *s)
{
    /*
     * with KBD_STAT_OBF set, a call to kbd_read_data() will eventually call
     * kbd_update_irq()
     */
    if (s->status & KBD_STAT_OBF) {
        return;
    }
    /* the throttle timer is pending and will call kbd_update_irq() */
    if (s->throttle_timer && timer_pending(s->throttle_timer)) {
        return;
    }
    if (kbd_pending(s)) {
        kbd_update_irq(s);
    }
}

static void kbd_update_kbd_irq(void *opaque, int level)
{
    KBDState *s = opaque;

    if (level) {
        s->pending |= KBD_PENDING_KBD;
    } else {
        s->pending &= ~KBD_PENDING_KBD;
    }
    kbd_safe_update_irq(s);
}

static void kbd_update_aux_irq(void *opaque, int level)
{
    KBDState *s = opaque;

    if (level) {
        s->pending |= KBD_PENDING_AUX;
    } else {
        s->pending &= ~KBD_PENDING_AUX;
    }
    kbd_safe_update_irq(s);
}

static void kbd_throttle_timeout(void *opaque)
{
    KBDState *s = opaque;

    if (kbd_pending(s)) {
        kbd_update_irq(s);
    }
}

static uint64_t kbd_read_status(void *opaque, hwaddr addr,
                                unsigned size)
{
    KBDState *s = opaque;
    int val;
    val = s->status;
    trace_pckbd_kbd_read_status(val);
    return val;
}

static void kbd_queue(KBDState *s, int b, int aux)
{
    if (s->extended_state) {
        s->cbdata = b;
        s->pending &= ~KBD_PENDING_CTRL_KBD & ~KBD_PENDING_CTRL_AUX;
        s->pending |= aux ? KBD_PENDING_CTRL_AUX : KBD_PENDING_CTRL_KBD;
        kbd_safe_update_irq(s);
    } else {
        ps2_queue(aux ? s->mouse : s->kbd, b);
    }
}

static uint8_t kbd_dequeue(KBDState *s)
{
    uint8_t b = s->cbdata;

    s->pending &= ~KBD_PENDING_CTRL_KBD & ~KBD_PENDING_CTRL_AUX;
    if (kbd_pending(s)) {
        kbd_update_irq(s);
    }
    return b;
}

static void outport_write(KBDState *s, uint32_t val)
{
    trace_pckbd_outport_write(val);
    s->outport = val;
    qemu_set_irq(s->a20_out, (val >> 1) & 1);
    if (!(val & 1)) {
        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
    }
}

static void kbd_write_command(void *opaque, hwaddr addr,
                              uint64_t val, unsigned size)
{
    KBDState *s = opaque;

    trace_pckbd_kbd_write_command(val);

    /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed
     * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
     * command specify the output port bits to be pulsed.
     * 0: Bit should be pulsed. 1: Bit should not be modified.
     * The only useful version of this command is pulsing bit 0,
     * which does a CPU reset.
     */
    if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) {
        if(!(val & 1))
            val = KBD_CCMD_RESET;
        else
            val = KBD_CCMD_NO_OP;
    }

    switch(val) {
    case KBD_CCMD_READ_MODE:
        kbd_queue(s, s->mode, 0);
        break;
    case KBD_CCMD_WRITE_MODE:
    case KBD_CCMD_WRITE_OBUF:
    case KBD_CCMD_WRITE_AUX_OBUF:
    case KBD_CCMD_WRITE_MOUSE:
    case KBD_CCMD_WRITE_OUTPORT:
        s->write_cmd = val;
        break;
    case KBD_CCMD_MOUSE_DISABLE:
        s->mode |= KBD_MODE_DISABLE_MOUSE;
        break;
    case KBD_CCMD_MOUSE_ENABLE:
        s->mode &= ~KBD_MODE_DISABLE_MOUSE;
        kbd_safe_update_irq(s);
        break;
    case KBD_CCMD_TEST_MOUSE:
        kbd_queue(s, 0x00, 0);
        break;
    case KBD_CCMD_SELF_TEST:
        s->status |= KBD_STAT_SELFTEST;
        kbd_queue(s, 0x55, 0);
        break;
    case KBD_CCMD_KBD_TEST:
        kbd_queue(s, 0x00, 0);
        break;
    case KBD_CCMD_KBD_DISABLE:
        s->mode |= KBD_MODE_DISABLE_KBD;
        break;
    case KBD_CCMD_KBD_ENABLE:
        s->mode &= ~KBD_MODE_DISABLE_KBD;
        kbd_safe_update_irq(s);
        break;
    case KBD_CCMD_READ_INPORT:
        kbd_queue(s, 0x80, 0);
        break;
    case KBD_CCMD_READ_OUTPORT:
        kbd_queue(s, s->outport, 0);
        break;
    case KBD_CCMD_ENABLE_A20:
        qemu_irq_raise(s->a20_out);
        s->outport |= KBD_OUT_A20;
        break;
    case KBD_CCMD_DISABLE_A20:
        qemu_irq_lower(s->a20_out);
        s->outport &= ~KBD_OUT_A20;
        break;
    case KBD_CCMD_RESET:
        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
        break;
    case KBD_CCMD_NO_OP:
        /* ignore that */
        break;
    default:
        qemu_log_mask(LOG_GUEST_ERROR,
                      "unsupported keyboard cmd=0x%02" PRIx64 "\n", val);
        break;
    }
}

static uint64_t kbd_read_data(void *opaque, hwaddr addr,
                              unsigned size)
{
    KBDState *s = opaque;

    if (s->status & KBD_STAT_OBF) {
        kbd_deassert_irq(s);
        if (s->obsrc & KBD_OBSRC_KBD) {
            if (s->throttle_timer) {
                timer_mod(s->throttle_timer,
                          qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + 1000);
            }
            s->obdata = ps2_read_data(s->kbd);
        } else if (s->obsrc & KBD_OBSRC_MOUSE) {
            s->obdata = ps2_read_data(s->mouse);
        } else if (s->obsrc & KBD_OBSRC_CTRL) {
            s->obdata = kbd_dequeue(s);
        }
    }

    trace_pckbd_kbd_read_data(s->obdata);
    return s->obdata;
}

static void kbd_write_data(void *opaque, hwaddr addr,
                           uint64_t val, unsigned size)
{
    KBDState *s = opaque;

    trace_pckbd_kbd_write_data(val);

    switch(s->write_cmd) {
    case 0:
        ps2_write_keyboard(s->kbd, val);
        /* sending data to the keyboard reenables PS/2 communication */
        s->mode &= ~KBD_MODE_DISABLE_KBD;
        kbd_safe_update_irq(s);
        break;
    case KBD_CCMD_WRITE_MODE:
        s->mode = val;
        ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0);
        /*
         * a write to the mode byte interrupt enable flags directly updates
         * the irq lines
         */
        kbd_update_irq_lines(s);
        /*
         * a write to the mode byte disable interface flags may raise
         * an irq if there is pending data in the PS/2 queues.
         */
        kbd_safe_update_irq(s);
        break;
    case KBD_CCMD_WRITE_OBUF:
        kbd_queue(s, val, 0);
        break;
    case KBD_CCMD_WRITE_AUX_OBUF:
        kbd_queue(s, val, 1);
        break;
    case KBD_CCMD_WRITE_OUTPORT:
        outport_write(s, val);
        break;
    case KBD_CCMD_WRITE_MOUSE:
        ps2_write_mouse(s->mouse, val);
        /* sending data to the mouse reenables PS/2 communication */
        s->mode &= ~KBD_MODE_DISABLE_MOUSE;
        kbd_safe_update_irq(s);
        break;
    default:
        break;
    }
    s->write_cmd = 0;
}

static void kbd_reset(void *opaque)
{
    KBDState *s = opaque;

    s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
    s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
    s->outport = KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES;
    s->outport_present = false;
    s->pending = 0;
    kbd_deassert_irq(s);
    if (s->throttle_timer) {
        timer_del(s->throttle_timer);
    }
}

static uint8_t kbd_outport_default(KBDState *s)
{
    return KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES
           | (s->status & KBD_STAT_OBF ? KBD_OUT_OBF : 0)
           | (s->status & KBD_STAT_MOUSE_OBF ? KBD_OUT_MOUSE_OBF : 0);
}

static int kbd_outport_post_load(void *opaque, int version_id)
{
    KBDState *s = opaque;
    s->outport_present = true;
    return 0;
}

static bool kbd_outport_needed(void *opaque)
{
    KBDState *s = opaque;
    return s->outport != kbd_outport_default(s);
}

static const VMStateDescription vmstate_kbd_outport = {
    .name = "pckbd_outport",
    .version_id = 1,
    .minimum_version_id = 1,
    .post_load = kbd_outport_post_load,
    .needed = kbd_outport_needed,
    .fields = (VMStateField[]) {
        VMSTATE_UINT8(outport, KBDState),
        VMSTATE_END_OF_LIST()
    }
};

static int kbd_extended_state_pre_save(void *opaque)
{
    KBDState *s = opaque;

    s->migration_flags = 0;
    if (s->throttle_timer && timer_pending(s->throttle_timer)) {
        s->migration_flags |= KBD_MIGR_TIMER_PENDING;
    }

    return 0;
}

static int kbd_extended_state_post_load(void *opaque, int version_id)
{
    KBDState *s = opaque;

    if (s->migration_flags & KBD_MIGR_TIMER_PENDING) {
        kbd_throttle_timeout(s);
    }
    s->extended_state_loaded = true;

    return 0;
}

static bool kbd_extended_state_needed(void *opaque)
{
    KBDState *s = opaque;

    return s->extended_state;
}

static const VMStateDescription vmstate_kbd_extended_state = {
    .name = "pckbd/extended_state",
    .post_load = kbd_extended_state_post_load,
    .pre_save = kbd_extended_state_pre_save,
    .needed = kbd_extended_state_needed,
    .fields = (VMStateField[]) {
        VMSTATE_UINT32(migration_flags, KBDState),
        VMSTATE_UINT32(obsrc, KBDState),
        VMSTATE_UINT8(obdata, KBDState),
        VMSTATE_UINT8(cbdata, KBDState),
        VMSTATE_END_OF_LIST()
    }
};

static int kbd_pre_save(void *opaque)
{
    KBDState *s = opaque;

    if (s->extended_state) {
        s->pending_tmp = s->pending;
    } else {
        s->pending_tmp = 0;
        if (s->pending & KBD_PENDING_KBD) {
            s->pending_tmp |= KBD_PENDING_KBD_COMPAT;
        }
        if (s->pending & KBD_PENDING_AUX) {
            s->pending_tmp |= KBD_PENDING_AUX_COMPAT;
        }
    }
    return 0;
}

static int kbd_pre_load(void *opaque)
{
    KBDState *s = opaque;

    s->extended_state_loaded = false;
    return 0;
}

static int kbd_post_load(void *opaque, int version_id)
{
    KBDState *s = opaque;
    if (!s->outport_present) {
        s->outport = kbd_outport_default(s);
    }
    s->outport_present = false;
    s->pending = s->pending_tmp;
    if (!s->extended_state_loaded) {
        s->obsrc = s->status & KBD_STAT_OBF ?
            (s->status & KBD_STAT_MOUSE_OBF ? KBD_OBSRC_MOUSE : KBD_OBSRC_KBD) :
            0;
        if (s->pending & KBD_PENDING_KBD_COMPAT) {
            s->pending |= KBD_PENDING_KBD;
        }
        if (s->pending & KBD_PENDING_AUX_COMPAT) {
            s->pending |= KBD_PENDING_AUX;
        }
    }
    /* clear all unused flags */
    s->pending &= KBD_PENDING_CTRL_KBD | KBD_PENDING_CTRL_AUX |
                  KBD_PENDING_KBD | KBD_PENDING_AUX;
    return 0;
}

static const VMStateDescription vmstate_kbd = {
    .name = "pckbd",
    .version_id = 3,
    .minimum_version_id = 3,
    .pre_load = kbd_pre_load,
    .post_load = kbd_post_load,
    .pre_save = kbd_pre_save,
    .fields = (VMStateField[]) {
        VMSTATE_UINT8(write_cmd, KBDState),
        VMSTATE_UINT8(status, KBDState),
        VMSTATE_UINT8(mode, KBDState),
        VMSTATE_UINT8(pending_tmp, KBDState),
        VMSTATE_END_OF_LIST()
    },
    .subsections = (const VMStateDescription*[]) {
        &vmstate_kbd_outport,
        &vmstate_kbd_extended_state,
        NULL
    }
};

/* Memory mapped interface */
static uint64_t kbd_mm_readfn(void *opaque, hwaddr addr, unsigned size)
{
    KBDState *s = opaque;

    if (addr & s->mask)
        return kbd_read_status(s, 0, 1) & 0xff;
    else
        return kbd_read_data(s, 0, 1) & 0xff;
}

static void kbd_mm_writefn(void *opaque, hwaddr addr,
                           uint64_t value, unsigned size)
{
    KBDState *s = opaque;

    if (addr & s->mask)
        kbd_write_command(s, 0, value & 0xff, 1);
    else
        kbd_write_data(s, 0, value & 0xff, 1);
}


static const MemoryRegionOps i8042_mmio_ops = {
    .read = kbd_mm_readfn,
    .write = kbd_mm_writefn,
    .valid.min_access_size = 1,
    .valid.max_access_size = 4,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,
                   MemoryRegion *region, ram_addr_t size,
                   hwaddr mask)
{
    KBDState *s = g_malloc0(sizeof(KBDState));

    s->irq_kbd = kbd_irq;
    s->irq_mouse = mouse_irq;
    s->mask = mask;

    s->extended_state = true;

    vmstate_register(NULL, 0, &vmstate_kbd, s);

    memory_region_init_io(region, NULL, &i8042_mmio_ops, s, "i8042", size);

    s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
    s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
    qemu_register_reset(kbd_reset, s);
}

struct ISAKBDState {
    ISADevice parent_obj;

    KBDState kbd;
    bool kbd_throttle;
    MemoryRegion io[2];
};

void i8042_isa_mouse_fake_event(ISAKBDState *isa)
{
    KBDState *s = &isa->kbd;

    ps2_mouse_fake_event(s->mouse);
}

void i8042_setup_a20_line(ISADevice *dev, qemu_irq a20_out)
{
    qdev_connect_gpio_out_named(DEVICE(dev), I8042_A20_LINE, 0, a20_out);
}

static const VMStateDescription vmstate_kbd_isa = {
    .name = "pckbd",
    .version_id = 3,
    .minimum_version_id = 3,
    .fields = (VMStateField[]) {
        VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState),
        VMSTATE_END_OF_LIST()
    }
};

static const MemoryRegionOps i8042_data_ops = {
    .read = kbd_read_data,
    .write = kbd_write_data,
    .impl = {
        .min_access_size = 1,
        .max_access_size = 1,
    },
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static const MemoryRegionOps i8042_cmd_ops = {
    .read = kbd_read_status,
    .write = kbd_write_command,
    .impl = {
        .min_access_size = 1,
        .max_access_size = 1,
    },
    .endianness = DEVICE_LITTLE_ENDIAN,
};

static void i8042_initfn(Object *obj)
{
    ISAKBDState *isa_s = I8042(obj);
    KBDState *s = &isa_s->kbd;

    memory_region_init_io(isa_s->io + 0, obj, &i8042_data_ops, s,
                          "i8042-data", 1);
    memory_region_init_io(isa_s->io + 1, obj, &i8042_cmd_ops, s,
                          "i8042-cmd", 1);

    qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, I8042_A20_LINE, 1);
}

static void i8042_realizefn(DeviceState *dev, Error **errp)
{
    ISADevice *isadev = ISA_DEVICE(dev);
    ISAKBDState *isa_s = I8042(dev);
    KBDState *s = &isa_s->kbd;

    isa_init_irq(isadev, &s->irq_kbd, 1);
    isa_init_irq(isadev, &s->irq_mouse, 12);

    isa_register_ioport(isadev, isa_s->io + 0, 0x60);
    isa_register_ioport(isadev, isa_s->io + 1, 0x64);

    s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
    s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
    if (isa_s->kbd_throttle && !isa_s->kbd.extended_state) {
        warn_report(TYPE_I8042 ": can't enable kbd-throttle without"
                    " extended-state, disabling kbd-throttle");
    } else if (isa_s->kbd_throttle) {
        s->throttle_timer = timer_new_us(QEMU_CLOCK_VIRTUAL,
                                         kbd_throttle_timeout, s);
    }
    qemu_register_reset(kbd_reset, s);
}

static void i8042_build_aml(ISADevice *isadev, Aml *scope)
{
    Aml *kbd;
    Aml *mou;
    Aml *crs;

    crs = aml_resource_template();
    aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01));
    aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01));
    aml_append(crs, aml_irq_no_flags(1));

    kbd = aml_device("KBD");
    aml_append(kbd, aml_name_decl("_HID", aml_eisaid("PNP0303")));
    aml_append(kbd, aml_name_decl("_STA", aml_int(0xf)));
    aml_append(kbd, aml_name_decl("_CRS", crs));

    crs = aml_resource_template();
    aml_append(crs, aml_irq_no_flags(12));

    mou = aml_device("MOU");
    aml_append(mou, aml_name_decl("_HID", aml_eisaid("PNP0F13")));
    aml_append(mou, aml_name_decl("_STA", aml_int(0xf)));
    aml_append(mou, aml_name_decl("_CRS", crs));

    aml_append(scope, kbd);
    aml_append(scope, mou);
}

static Property i8042_properties[] = {
    DEFINE_PROP_BOOL("extended-state", ISAKBDState, kbd.extended_state, true),
    DEFINE_PROP_BOOL("kbd-throttle", ISAKBDState, kbd_throttle, false),
    DEFINE_PROP_END_OF_LIST(),
};

static void i8042_class_initfn(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);

    device_class_set_props(dc, i8042_properties);
    dc->realize = i8042_realizefn;
    dc->vmsd = &vmstate_kbd_isa;
    isa->build_aml = i8042_build_aml;
    set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
}

static const TypeInfo i8042_info = {
    .name          = TYPE_I8042,
    .parent        = TYPE_ISA_DEVICE,
    .instance_size = sizeof(ISAKBDState),
    .instance_init = i8042_initfn,
    .class_init    = i8042_class_initfn,
};

static void i8042_register_types(void)
{
    type_register_static(&i8042_info);
}

type_init(i8042_register_types)