xref: /qemu/hw/intc/arm_gicv3_cpuif.c (revision 62815d85)
1 /*
2  * ARM Generic Interrupt Controller v3
3  *
4  * Copyright (c) 2016 Linaro Limited
5  * Written by Peter Maydell
6  *
7  * This code is licensed under the GPL, version 2 or (at your option)
8  * any later version.
9  */
10 
11 /* This file contains the code for the system register interface
12  * portions of the GICv3.
13  */
14 
15 #include "qemu/osdep.h"
16 #include "qemu/bitops.h"
17 #include "qemu/main-loop.h"
18 #include "trace.h"
19 #include "gicv3_internal.h"
20 #include "cpu.h"
21 
22 void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s)
23 {
24     ARMCPU *arm_cpu = ARM_CPU(cpu);
25     CPUARMState *env = &arm_cpu->env;
26 
27     env->gicv3state = (void *)s;
28 };
29 
30 static GICv3CPUState *icc_cs_from_env(CPUARMState *env)
31 {
32     return env->gicv3state;
33 }
34 
35 static bool gicv3_use_ns_bank(CPUARMState *env)
36 {
37     /* Return true if we should use the NonSecure bank for a banked GIC
38      * CPU interface register. Note that this differs from the
39      * access_secure_reg() function because GICv3 banked registers are
40      * banked even for AArch64, unlike the other CPU system registers.
41      */
42     return !arm_is_secure_below_el3(env);
43 }
44 
45 /* The minimum BPR for the virtual interface is a configurable property */
46 static inline int icv_min_vbpr(GICv3CPUState *cs)
47 {
48     return 7 - cs->vprebits;
49 }
50 
51 /* Simple accessor functions for LR fields */
52 static uint32_t ich_lr_vintid(uint64_t lr)
53 {
54     return extract64(lr, ICH_LR_EL2_VINTID_SHIFT, ICH_LR_EL2_VINTID_LENGTH);
55 }
56 
57 static uint32_t ich_lr_pintid(uint64_t lr)
58 {
59     return extract64(lr, ICH_LR_EL2_PINTID_SHIFT, ICH_LR_EL2_PINTID_LENGTH);
60 }
61 
62 static uint32_t ich_lr_prio(uint64_t lr)
63 {
64     return extract64(lr, ICH_LR_EL2_PRIORITY_SHIFT, ICH_LR_EL2_PRIORITY_LENGTH);
65 }
66 
67 static int ich_lr_state(uint64_t lr)
68 {
69     return extract64(lr, ICH_LR_EL2_STATE_SHIFT, ICH_LR_EL2_STATE_LENGTH);
70 }
71 
72 static bool icv_access(CPUARMState *env, int hcr_flags)
73 {
74     /* Return true if this ICC_ register access should really be
75      * directed to an ICV_ access. hcr_flags is a mask of
76      * HCR_EL2 bits to check: we treat this as an ICV_ access
77      * if we are in NS EL1 and at least one of the specified
78      * HCR_EL2 bits is set.
79      *
80      * ICV registers fall into four categories:
81      *  * access if NS EL1 and HCR_EL2.FMO == 1:
82      *    all ICV regs with '0' in their name
83      *  * access if NS EL1 and HCR_EL2.IMO == 1:
84      *    all ICV regs with '1' in their name
85      *  * access if NS EL1 and either IMO or FMO == 1:
86      *    CTLR, DIR, PMR, RPR
87      */
88     bool flagmatch = ((hcr_flags & HCR_IMO) && arm_hcr_el2_imo(env)) ||
89         ((hcr_flags & HCR_FMO) && arm_hcr_el2_fmo(env));
90 
91     return flagmatch && arm_current_el(env) == 1
92         && !arm_is_secure_below_el3(env);
93 }
94 
95 static int read_vbpr(GICv3CPUState *cs, int grp)
96 {
97     /* Read VBPR value out of the VMCR field (caller must handle
98      * VCBPR effects if required)
99      */
100     if (grp == GICV3_G0) {
101         return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
102                      ICH_VMCR_EL2_VBPR0_LENGTH);
103     } else {
104         return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
105                          ICH_VMCR_EL2_VBPR1_LENGTH);
106     }
107 }
108 
109 static void write_vbpr(GICv3CPUState *cs, int grp, int value)
110 {
111     /* Write new VBPR1 value, handling the "writing a value less than
112      * the minimum sets it to the minimum" semantics.
113      */
114     int min = icv_min_vbpr(cs);
115 
116     if (grp != GICV3_G0) {
117         min++;
118     }
119 
120     value = MAX(value, min);
121 
122     if (grp == GICV3_G0) {
123         cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
124                                      ICH_VMCR_EL2_VBPR0_LENGTH, value);
125     } else {
126         cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
127                                      ICH_VMCR_EL2_VBPR1_LENGTH, value);
128     }
129 }
130 
131 static uint32_t icv_fullprio_mask(GICv3CPUState *cs)
132 {
133     /* Return a mask word which clears the unimplemented priority bits
134      * from a priority value for a virtual interrupt. (Not to be confused
135      * with the group priority, whose mask depends on the value of VBPR
136      * for the interrupt group.)
137      */
138     return ~0U << (8 - cs->vpribits);
139 }
140 
141 static int ich_highest_active_virt_prio(GICv3CPUState *cs)
142 {
143     /* Calculate the current running priority based on the set bits
144      * in the ICH Active Priority Registers.
145      */
146     int i;
147     int aprmax = 1 << (cs->vprebits - 5);
148 
149     assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
150 
151     for (i = 0; i < aprmax; i++) {
152         uint32_t apr = cs->ich_apr[GICV3_G0][i] |
153             cs->ich_apr[GICV3_G1NS][i];
154 
155         if (!apr) {
156             continue;
157         }
158         return (i * 32 + ctz32(apr)) << (icv_min_vbpr(cs) + 1);
159     }
160     /* No current active interrupts: return idle priority */
161     return 0xff;
162 }
163 
164 static int hppvi_index(GICv3CPUState *cs)
165 {
166     /* Return the list register index of the highest priority pending
167      * virtual interrupt, as per the HighestPriorityVirtualInterrupt
168      * pseudocode. If no pending virtual interrupts, return -1.
169      */
170     int idx = -1;
171     int i;
172     /* Note that a list register entry with a priority of 0xff will
173      * never be reported by this function; this is the architecturally
174      * correct behaviour.
175      */
176     int prio = 0xff;
177 
178     if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) {
179         /* Both groups disabled, definitely nothing to do */
180         return idx;
181     }
182 
183     for (i = 0; i < cs->num_list_regs; i++) {
184         uint64_t lr = cs->ich_lr_el2[i];
185         int thisprio;
186 
187         if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) {
188             /* Not Pending */
189             continue;
190         }
191 
192         /* Ignore interrupts if relevant group enable not set */
193         if (lr & ICH_LR_EL2_GROUP) {
194             if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
195                 continue;
196             }
197         } else {
198             if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
199                 continue;
200             }
201         }
202 
203         thisprio = ich_lr_prio(lr);
204 
205         if (thisprio < prio) {
206             prio = thisprio;
207             idx = i;
208         }
209     }
210 
211     return idx;
212 }
213 
214 static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group)
215 {
216     /* Return a mask word which clears the subpriority bits from
217      * a priority value for a virtual interrupt in the specified group.
218      * This depends on the VBPR value.
219      * If using VBPR0 then:
220      *  a BPR of 0 means the group priority bits are [7:1];
221      *  a BPR of 1 means they are [7:2], and so on down to
222      *  a BPR of 7 meaning no group priority bits at all.
223      * If using VBPR1 then:
224      *  a BPR of 0 is impossible (the minimum value is 1)
225      *  a BPR of 1 means the group priority bits are [7:1];
226      *  a BPR of 2 means they are [7:2], and so on down to
227      *  a BPR of 7 meaning the group priority is [7].
228      *
229      * Which BPR to use depends on the group of the interrupt and
230      * the current ICH_VMCR_EL2.VCBPR settings.
231      *
232      * This corresponds to the VGroupBits() pseudocode.
233      */
234     int bpr;
235 
236     if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
237         group = GICV3_G0;
238     }
239 
240     bpr = read_vbpr(cs, group);
241     if (group == GICV3_G1NS) {
242         assert(bpr > 0);
243         bpr--;
244     }
245 
246     return ~0U << (bpr + 1);
247 }
248 
249 static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr)
250 {
251     /* Return true if we can signal this virtual interrupt defined by
252      * the given list register value; see the pseudocode functions
253      * CanSignalVirtualInterrupt and CanSignalVirtualInt.
254      * Compare also icc_hppi_can_preempt() which is the non-virtual
255      * equivalent of these checks.
256      */
257     int grp;
258     uint32_t mask, prio, rprio, vpmr;
259 
260     if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) {
261         /* Virtual interface disabled */
262         return false;
263     }
264 
265     /* We don't need to check that this LR is in Pending state because
266      * that has already been done in hppvi_index().
267      */
268 
269     prio = ich_lr_prio(lr);
270     vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
271                      ICH_VMCR_EL2_VPMR_LENGTH);
272 
273     if (prio >= vpmr) {
274         /* Priority mask masks this interrupt */
275         return false;
276     }
277 
278     rprio = ich_highest_active_virt_prio(cs);
279     if (rprio == 0xff) {
280         /* No running interrupt so we can preempt */
281         return true;
282     }
283 
284     grp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
285 
286     mask = icv_gprio_mask(cs, grp);
287 
288     /* We only preempt a running interrupt if the pending interrupt's
289      * group priority is sufficient (the subpriorities are not considered).
290      */
291     if ((prio & mask) < (rprio & mask)) {
292         return true;
293     }
294 
295     return false;
296 }
297 
298 static uint32_t eoi_maintenance_interrupt_state(GICv3CPUState *cs,
299                                                 uint32_t *misr)
300 {
301     /* Return a set of bits indicating the EOI maintenance interrupt status
302      * for each list register. The EOI maintenance interrupt status is
303      * 1 if LR.State == 0 && LR.HW == 0 && LR.EOI == 1
304      * (see the GICv3 spec for the ICH_EISR_EL2 register).
305      * If misr is not NULL then we should also collect the information
306      * about the MISR.EOI, MISR.NP and MISR.U bits.
307      */
308     uint32_t value = 0;
309     int validcount = 0;
310     bool seenpending = false;
311     int i;
312 
313     for (i = 0; i < cs->num_list_regs; i++) {
314         uint64_t lr = cs->ich_lr_el2[i];
315 
316         if ((lr & (ICH_LR_EL2_STATE_MASK | ICH_LR_EL2_HW | ICH_LR_EL2_EOI))
317             == ICH_LR_EL2_EOI) {
318             value |= (1 << i);
319         }
320         if ((lr & ICH_LR_EL2_STATE_MASK)) {
321             validcount++;
322         }
323         if (ich_lr_state(lr) == ICH_LR_EL2_STATE_PENDING) {
324             seenpending = true;
325         }
326     }
327 
328     if (misr) {
329         if (validcount < 2 && (cs->ich_hcr_el2 & ICH_HCR_EL2_UIE)) {
330             *misr |= ICH_MISR_EL2_U;
331         }
332         if (!seenpending && (cs->ich_hcr_el2 & ICH_HCR_EL2_NPIE)) {
333             *misr |= ICH_MISR_EL2_NP;
334         }
335         if (value) {
336             *misr |= ICH_MISR_EL2_EOI;
337         }
338     }
339     return value;
340 }
341 
342 static uint32_t maintenance_interrupt_state(GICv3CPUState *cs)
343 {
344     /* Return a set of bits indicating the maintenance interrupt status
345      * (as seen in the ICH_MISR_EL2 register).
346      */
347     uint32_t value = 0;
348 
349     /* Scan list registers and fill in the U, NP and EOI bits */
350     eoi_maintenance_interrupt_state(cs, &value);
351 
352     if (cs->ich_hcr_el2 & (ICH_HCR_EL2_LRENPIE | ICH_HCR_EL2_EOICOUNT_MASK)) {
353         value |= ICH_MISR_EL2_LRENP;
354     }
355 
356     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0EIE) &&
357         (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
358         value |= ICH_MISR_EL2_VGRP0E;
359     }
360 
361     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0DIE) &&
362         !(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
363         value |= ICH_MISR_EL2_VGRP0D;
364     }
365     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1EIE) &&
366         (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
367         value |= ICH_MISR_EL2_VGRP1E;
368     }
369 
370     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1DIE) &&
371         !(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
372         value |= ICH_MISR_EL2_VGRP1D;
373     }
374 
375     return value;
376 }
377 
378 static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
379 {
380     /* Tell the CPU about any pending virtual interrupts or
381      * maintenance interrupts, following a change to the state
382      * of the CPU interface relevant to virtual interrupts.
383      *
384      * CAUTION: this function will call qemu_set_irq() on the
385      * CPU maintenance IRQ line, which is typically wired up
386      * to the GIC as a per-CPU interrupt. This means that it
387      * will recursively call back into the GIC code via
388      * gicv3_redist_set_irq() and thus into the CPU interface code's
389      * gicv3_cpuif_update(). It is therefore important that this
390      * function is only called as the final action of a CPU interface
391      * register write implementation, after all the GIC state
392      * fields have been updated. gicv3_cpuif_update() also must
393      * not cause this function to be called, but that happens
394      * naturally as a result of there being no architectural
395      * linkage between the physical and virtual GIC logic.
396      */
397     int idx;
398     int irqlevel = 0;
399     int fiqlevel = 0;
400     int maintlevel = 0;
401 
402     idx = hppvi_index(cs);
403     trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx);
404     if (idx >= 0) {
405         uint64_t lr = cs->ich_lr_el2[idx];
406 
407         if (icv_hppi_can_preempt(cs, lr)) {
408             /* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */
409             if (lr & ICH_LR_EL2_GROUP) {
410                 irqlevel = 1;
411             } else {
412                 fiqlevel = 1;
413             }
414         }
415     }
416 
417     if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) {
418         maintlevel = maintenance_interrupt_state(cs);
419     }
420 
421     trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel,
422                                     irqlevel, maintlevel);
423 
424     qemu_set_irq(cs->parent_vfiq, fiqlevel);
425     qemu_set_irq(cs->parent_virq, irqlevel);
426     qemu_set_irq(cs->maintenance_irq, maintlevel);
427 }
428 
429 static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
430 {
431     GICv3CPUState *cs = icc_cs_from_env(env);
432     int regno = ri->opc2 & 3;
433     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
434     uint64_t value = cs->ich_apr[grp][regno];
435 
436     trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
437     return value;
438 }
439 
440 static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
441                          uint64_t value)
442 {
443     GICv3CPUState *cs = icc_cs_from_env(env);
444     int regno = ri->opc2 & 3;
445     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
446 
447     trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
448 
449     cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
450 
451     gicv3_cpuif_virt_update(cs);
452     return;
453 }
454 
455 static uint64_t icv_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
456 {
457     GICv3CPUState *cs = icc_cs_from_env(env);
458     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
459     uint64_t bpr;
460     bool satinc = false;
461 
462     if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
463         /* reads return bpr0 + 1 saturated to 7, writes ignored */
464         grp = GICV3_G0;
465         satinc = true;
466     }
467 
468     bpr = read_vbpr(cs, grp);
469 
470     if (satinc) {
471         bpr++;
472         bpr = MIN(bpr, 7);
473     }
474 
475     trace_gicv3_icv_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
476 
477     return bpr;
478 }
479 
480 static void icv_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
481                           uint64_t value)
482 {
483     GICv3CPUState *cs = icc_cs_from_env(env);
484     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
485 
486     trace_gicv3_icv_bpr_write(ri->crm == 8 ? 0 : 1,
487                               gicv3_redist_affid(cs), value);
488 
489     if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
490         /* reads return bpr0 + 1 saturated to 7, writes ignored */
491         return;
492     }
493 
494     write_vbpr(cs, grp, value);
495 
496     gicv3_cpuif_virt_update(cs);
497 }
498 
499 static uint64_t icv_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
500 {
501     GICv3CPUState *cs = icc_cs_from_env(env);
502     uint64_t value;
503 
504     value = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
505                       ICH_VMCR_EL2_VPMR_LENGTH);
506 
507     trace_gicv3_icv_pmr_read(gicv3_redist_affid(cs), value);
508     return value;
509 }
510 
511 static void icv_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
512                           uint64_t value)
513 {
514     GICv3CPUState *cs = icc_cs_from_env(env);
515 
516     trace_gicv3_icv_pmr_write(gicv3_redist_affid(cs), value);
517 
518     value &= icv_fullprio_mask(cs);
519 
520     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
521                                  ICH_VMCR_EL2_VPMR_LENGTH, value);
522 
523     gicv3_cpuif_virt_update(cs);
524 }
525 
526 static uint64_t icv_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
527 {
528     GICv3CPUState *cs = icc_cs_from_env(env);
529     int enbit;
530     uint64_t value;
531 
532     enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
533     value = extract64(cs->ich_vmcr_el2, enbit, 1);
534 
535     trace_gicv3_icv_igrpen_read(ri->opc2 & 1 ? 1 : 0,
536                                 gicv3_redist_affid(cs), value);
537     return value;
538 }
539 
540 static void icv_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
541                              uint64_t value)
542 {
543     GICv3CPUState *cs = icc_cs_from_env(env);
544     int enbit;
545 
546     trace_gicv3_icv_igrpen_write(ri->opc2 & 1 ? 1 : 0,
547                                  gicv3_redist_affid(cs), value);
548 
549     enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
550 
551     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, enbit, 1, value);
552     gicv3_cpuif_virt_update(cs);
553 }
554 
555 static uint64_t icv_ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
556 {
557     GICv3CPUState *cs = icc_cs_from_env(env);
558     uint64_t value;
559 
560     /* Note that the fixed fields here (A3V, SEIS, IDbits, PRIbits)
561      * should match the ones reported in ich_vtr_read().
562      */
563     value = ICC_CTLR_EL1_A3V | (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
564         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
565 
566     if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM) {
567         value |= ICC_CTLR_EL1_EOIMODE;
568     }
569 
570     if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
571         value |= ICC_CTLR_EL1_CBPR;
572     }
573 
574     trace_gicv3_icv_ctlr_read(gicv3_redist_affid(cs), value);
575     return value;
576 }
577 
578 static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
579                                uint64_t value)
580 {
581     GICv3CPUState *cs = icc_cs_from_env(env);
582 
583     trace_gicv3_icv_ctlr_write(gicv3_redist_affid(cs), value);
584 
585     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VCBPR_SHIFT,
586                                  1, value & ICC_CTLR_EL1_CBPR ? 1 : 0);
587     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VEOIM_SHIFT,
588                                  1, value & ICC_CTLR_EL1_EOIMODE ? 1 : 0);
589 
590     gicv3_cpuif_virt_update(cs);
591 }
592 
593 static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
594 {
595     GICv3CPUState *cs = icc_cs_from_env(env);
596     int prio = ich_highest_active_virt_prio(cs);
597 
598     trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio);
599     return prio;
600 }
601 
602 static uint64_t icv_hppir_read(CPUARMState *env, const ARMCPRegInfo *ri)
603 {
604     GICv3CPUState *cs = icc_cs_from_env(env);
605     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
606     int idx = hppvi_index(cs);
607     uint64_t value = INTID_SPURIOUS;
608 
609     if (idx >= 0) {
610         uint64_t lr = cs->ich_lr_el2[idx];
611         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
612 
613         if (grp == thisgrp) {
614             value = ich_lr_vintid(lr);
615         }
616     }
617 
618     trace_gicv3_icv_hppir_read(grp, gicv3_redist_affid(cs), value);
619     return value;
620 }
621 
622 static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp)
623 {
624     /* Activate the interrupt in the specified list register
625      * by moving it from Pending to Active state, and update the
626      * Active Priority Registers.
627      */
628     uint32_t mask = icv_gprio_mask(cs, grp);
629     int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask;
630     int aprbit = prio >> (8 - cs->vprebits);
631     int regno = aprbit / 32;
632     int regbit = aprbit % 32;
633 
634     cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
635     cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT;
636     cs->ich_apr[grp][regno] |= (1 << regbit);
637 }
638 
639 static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri)
640 {
641     GICv3CPUState *cs = icc_cs_from_env(env);
642     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
643     int idx = hppvi_index(cs);
644     uint64_t intid = INTID_SPURIOUS;
645 
646     if (idx >= 0) {
647         uint64_t lr = cs->ich_lr_el2[idx];
648         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
649 
650         if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) {
651             intid = ich_lr_vintid(lr);
652             if (intid < INTID_SECURE) {
653                 icv_activate_irq(cs, idx, grp);
654             } else {
655                 /* Interrupt goes from Pending to Invalid */
656                 cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
657                 /* We will now return the (bogus) ID from the list register,
658                  * as per the pseudocode.
659                  */
660             }
661         }
662     }
663 
664     trace_gicv3_icv_iar_read(ri->crm == 8 ? 0 : 1,
665                              gicv3_redist_affid(cs), intid);
666     return intid;
667 }
668 
669 static int icc_highest_active_prio(GICv3CPUState *cs)
670 {
671     /* Calculate the current running priority based on the set bits
672      * in the Active Priority Registers.
673      */
674     int i;
675 
676     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
677         uint32_t apr = cs->icc_apr[GICV3_G0][i] |
678             cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i];
679 
680         if (!apr) {
681             continue;
682         }
683         return (i * 32 + ctz32(apr)) << (GIC_MIN_BPR + 1);
684     }
685     /* No current active interrupts: return idle priority */
686     return 0xff;
687 }
688 
689 static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group)
690 {
691     /* Return a mask word which clears the subpriority bits from
692      * a priority value for an interrupt in the specified group.
693      * This depends on the BPR value. For CBPR0 (S or NS):
694      *  a BPR of 0 means the group priority bits are [7:1];
695      *  a BPR of 1 means they are [7:2], and so on down to
696      *  a BPR of 7 meaning no group priority bits at all.
697      * For CBPR1 NS:
698      *  a BPR of 0 is impossible (the minimum value is 1)
699      *  a BPR of 1 means the group priority bits are [7:1];
700      *  a BPR of 2 means they are [7:2], and so on down to
701      *  a BPR of 7 meaning the group priority is [7].
702      *
703      * Which BPR to use depends on the group of the interrupt and
704      * the current ICC_CTLR.CBPR settings.
705      *
706      * This corresponds to the GroupBits() pseudocode.
707      */
708     int bpr;
709 
710     if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) ||
711         (group == GICV3_G1NS &&
712          cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
713         group = GICV3_G0;
714     }
715 
716     bpr = cs->icc_bpr[group] & 7;
717 
718     if (group == GICV3_G1NS) {
719         assert(bpr > 0);
720         bpr--;
721     }
722 
723     return ~0U << (bpr + 1);
724 }
725 
726 static bool icc_no_enabled_hppi(GICv3CPUState *cs)
727 {
728     /* Return true if there is no pending interrupt, or the
729      * highest priority pending interrupt is in a group which has been
730      * disabled at the CPU interface by the ICC_IGRPEN* register enable bits.
731      */
732     return cs->hppi.prio == 0xff || (cs->icc_igrpen[cs->hppi.grp] == 0);
733 }
734 
735 static bool icc_hppi_can_preempt(GICv3CPUState *cs)
736 {
737     /* Return true if we have a pending interrupt of sufficient
738      * priority to preempt.
739      */
740     int rprio;
741     uint32_t mask;
742 
743     if (icc_no_enabled_hppi(cs)) {
744         return false;
745     }
746 
747     if (cs->hppi.prio >= cs->icc_pmr_el1) {
748         /* Priority mask masks this interrupt */
749         return false;
750     }
751 
752     rprio = icc_highest_active_prio(cs);
753     if (rprio == 0xff) {
754         /* No currently running interrupt so we can preempt */
755         return true;
756     }
757 
758     mask = icc_gprio_mask(cs, cs->hppi.grp);
759 
760     /* We only preempt a running interrupt if the pending interrupt's
761      * group priority is sufficient (the subpriorities are not considered).
762      */
763     if ((cs->hppi.prio & mask) < (rprio & mask)) {
764         return true;
765     }
766 
767     return false;
768 }
769 
770 void gicv3_cpuif_update(GICv3CPUState *cs)
771 {
772     /* Tell the CPU about its highest priority pending interrupt */
773     int irqlevel = 0;
774     int fiqlevel = 0;
775     ARMCPU *cpu = ARM_CPU(cs->cpu);
776     CPUARMState *env = &cpu->env;
777 
778     g_assert(qemu_mutex_iothread_locked());
779 
780     trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
781                              cs->hppi.grp, cs->hppi.prio);
782 
783     if (cs->hppi.grp == GICV3_G1 && !arm_feature(env, ARM_FEATURE_EL3)) {
784         /* If a Security-enabled GIC sends a G1S interrupt to a
785          * Security-disabled CPU, we must treat it as if it were G0.
786          */
787         cs->hppi.grp = GICV3_G0;
788     }
789 
790     if (icc_hppi_can_preempt(cs)) {
791         /* We have an interrupt: should we signal it as IRQ or FIQ?
792          * This is described in the GICv3 spec section 4.6.2.
793          */
794         bool isfiq;
795 
796         switch (cs->hppi.grp) {
797         case GICV3_G0:
798             isfiq = true;
799             break;
800         case GICV3_G1:
801             isfiq = (!arm_is_secure(env) ||
802                      (arm_current_el(env) == 3 && arm_el_is_aa64(env, 3)));
803             break;
804         case GICV3_G1NS:
805             isfiq = arm_is_secure(env);
806             break;
807         default:
808             g_assert_not_reached();
809         }
810 
811         if (isfiq) {
812             fiqlevel = 1;
813         } else {
814             irqlevel = 1;
815         }
816     }
817 
818     trace_gicv3_cpuif_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel);
819 
820     qemu_set_irq(cs->parent_fiq, fiqlevel);
821     qemu_set_irq(cs->parent_irq, irqlevel);
822 }
823 
824 static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
825 {
826     GICv3CPUState *cs = icc_cs_from_env(env);
827     uint32_t value = cs->icc_pmr_el1;
828 
829     if (icv_access(env, HCR_FMO | HCR_IMO)) {
830         return icv_pmr_read(env, ri);
831     }
832 
833     if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
834         (env->cp15.scr_el3 & SCR_FIQ)) {
835         /* NS access and Group 0 is inaccessible to NS: return the
836          * NS view of the current priority
837          */
838         if ((value & 0x80) == 0) {
839             /* Secure priorities not visible to NS */
840             value = 0;
841         } else if (value != 0xff) {
842             value = (value << 1) & 0xff;
843         }
844     }
845 
846     trace_gicv3_icc_pmr_read(gicv3_redist_affid(cs), value);
847 
848     return value;
849 }
850 
851 static void icc_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
852                           uint64_t value)
853 {
854     GICv3CPUState *cs = icc_cs_from_env(env);
855 
856     if (icv_access(env, HCR_FMO | HCR_IMO)) {
857         return icv_pmr_write(env, ri, value);
858     }
859 
860     trace_gicv3_icc_pmr_write(gicv3_redist_affid(cs), value);
861 
862     value &= 0xff;
863 
864     if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
865         (env->cp15.scr_el3 & SCR_FIQ)) {
866         /* NS access and Group 0 is inaccessible to NS: return the
867          * NS view of the current priority
868          */
869         if (!(cs->icc_pmr_el1 & 0x80)) {
870             /* Current PMR in the secure range, don't allow NS to change it */
871             return;
872         }
873         value = (value >> 1) | 0x80;
874     }
875     cs->icc_pmr_el1 = value;
876     gicv3_cpuif_update(cs);
877 }
878 
879 static void icc_activate_irq(GICv3CPUState *cs, int irq)
880 {
881     /* Move the interrupt from the Pending state to Active, and update
882      * the Active Priority Registers
883      */
884     uint32_t mask = icc_gprio_mask(cs, cs->hppi.grp);
885     int prio = cs->hppi.prio & mask;
886     int aprbit = prio >> 1;
887     int regno = aprbit / 32;
888     int regbit = aprbit % 32;
889 
890     cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit);
891 
892     if (irq < GIC_INTERNAL) {
893         cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
894         cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
895         gicv3_redist_update(cs);
896     } else {
897         gicv3_gicd_active_set(cs->gic, irq);
898         gicv3_gicd_pending_clear(cs->gic, irq);
899         gicv3_update(cs->gic, irq, 1);
900     }
901 }
902 
903 static uint64_t icc_hppir0_value(GICv3CPUState *cs, CPUARMState *env)
904 {
905     /* Return the highest priority pending interrupt register value
906      * for group 0.
907      */
908     bool irq_is_secure;
909 
910     if (cs->hppi.prio == 0xff) {
911         return INTID_SPURIOUS;
912     }
913 
914     /* Check whether we can return the interrupt or if we should return
915      * a special identifier, as per the CheckGroup0ForSpecialIdentifiers
916      * pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
917      * is always zero.)
918      */
919     irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
920                      (cs->hppi.grp != GICV3_G1NS));
921 
922     if (cs->hppi.grp != GICV3_G0 && !arm_is_el3_or_mon(env)) {
923         return INTID_SPURIOUS;
924     }
925     if (irq_is_secure && !arm_is_secure(env)) {
926         /* Secure interrupts not visible to Nonsecure */
927         return INTID_SPURIOUS;
928     }
929 
930     if (cs->hppi.grp != GICV3_G0) {
931         /* Indicate to EL3 that there's a Group 1 interrupt for the other
932          * state pending.
933          */
934         return irq_is_secure ? INTID_SECURE : INTID_NONSECURE;
935     }
936 
937     return cs->hppi.irq;
938 }
939 
940 static uint64_t icc_hppir1_value(GICv3CPUState *cs, CPUARMState *env)
941 {
942     /* Return the highest priority pending interrupt register value
943      * for group 1.
944      */
945     bool irq_is_secure;
946 
947     if (cs->hppi.prio == 0xff) {
948         return INTID_SPURIOUS;
949     }
950 
951     /* Check whether we can return the interrupt or if we should return
952      * a special identifier, as per the CheckGroup1ForSpecialIdentifiers
953      * pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
954      * is always zero.)
955      */
956     irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
957                      (cs->hppi.grp != GICV3_G1NS));
958 
959     if (cs->hppi.grp == GICV3_G0) {
960         /* Group 0 interrupts not visible via HPPIR1 */
961         return INTID_SPURIOUS;
962     }
963     if (irq_is_secure) {
964         if (!arm_is_secure(env)) {
965             /* Secure interrupts not visible in Non-secure */
966             return INTID_SPURIOUS;
967         }
968     } else if (!arm_is_el3_or_mon(env) && arm_is_secure(env)) {
969         /* Group 1 non-secure interrupts not visible in Secure EL1 */
970         return INTID_SPURIOUS;
971     }
972 
973     return cs->hppi.irq;
974 }
975 
976 static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri)
977 {
978     GICv3CPUState *cs = icc_cs_from_env(env);
979     uint64_t intid;
980 
981     if (icv_access(env, HCR_FMO)) {
982         return icv_iar_read(env, ri);
983     }
984 
985     if (!icc_hppi_can_preempt(cs)) {
986         intid = INTID_SPURIOUS;
987     } else {
988         intid = icc_hppir0_value(cs, env);
989     }
990 
991     if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
992         icc_activate_irq(cs, intid);
993     }
994 
995     trace_gicv3_icc_iar0_read(gicv3_redist_affid(cs), intid);
996     return intid;
997 }
998 
999 static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1000 {
1001     GICv3CPUState *cs = icc_cs_from_env(env);
1002     uint64_t intid;
1003 
1004     if (icv_access(env, HCR_IMO)) {
1005         return icv_iar_read(env, ri);
1006     }
1007 
1008     if (!icc_hppi_can_preempt(cs)) {
1009         intid = INTID_SPURIOUS;
1010     } else {
1011         intid = icc_hppir1_value(cs, env);
1012     }
1013 
1014     if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
1015         icc_activate_irq(cs, intid);
1016     }
1017 
1018     trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid);
1019     return intid;
1020 }
1021 
1022 static void icc_drop_prio(GICv3CPUState *cs, int grp)
1023 {
1024     /* Drop the priority of the currently active interrupt in
1025      * the specified group.
1026      *
1027      * Note that we can guarantee (because of the requirement to nest
1028      * ICC_IAR reads [which activate an interrupt and raise priority]
1029      * with ICC_EOIR writes [which drop the priority for the interrupt])
1030      * that the interrupt we're being called for is the highest priority
1031      * active interrupt, meaning that it has the lowest set bit in the
1032      * APR registers.
1033      *
1034      * If the guest does not honour the ordering constraints then the
1035      * behaviour of the GIC is UNPREDICTABLE, which for us means that
1036      * the values of the APR registers might become incorrect and the
1037      * running priority will be wrong, so interrupts that should preempt
1038      * might not do so, and interrupts that should not preempt might do so.
1039      */
1040     int i;
1041 
1042     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[grp]); i++) {
1043         uint64_t *papr = &cs->icc_apr[grp][i];
1044 
1045         if (!*papr) {
1046             continue;
1047         }
1048         /* Clear the lowest set bit */
1049         *papr &= *papr - 1;
1050         break;
1051     }
1052 
1053     /* running priority change means we need an update for this cpu i/f */
1054     gicv3_cpuif_update(cs);
1055 }
1056 
1057 static bool icc_eoi_split(CPUARMState *env, GICv3CPUState *cs)
1058 {
1059     /* Return true if we should split priority drop and interrupt
1060      * deactivation, ie whether the relevant EOIMode bit is set.
1061      */
1062     if (arm_is_el3_or_mon(env)) {
1063         return cs->icc_ctlr_el3 & ICC_CTLR_EL3_EOIMODE_EL3;
1064     }
1065     if (arm_is_secure_below_el3(env)) {
1066         return cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_EOIMODE;
1067     } else {
1068         return cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE;
1069     }
1070 }
1071 
1072 static int icc_highest_active_group(GICv3CPUState *cs)
1073 {
1074     /* Return the group with the highest priority active interrupt.
1075      * We can do this by just comparing the APRs to see which one
1076      * has the lowest set bit.
1077      * (If more than one group is active at the same priority then
1078      * we're in UNPREDICTABLE territory.)
1079      */
1080     int i;
1081 
1082     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
1083         int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]);
1084         int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]);
1085         int g1nsctz = ctz32(cs->icc_apr[GICV3_G1NS][i]);
1086 
1087         if (g1nsctz < g0ctz && g1nsctz < g1ctz) {
1088             return GICV3_G1NS;
1089         }
1090         if (g1ctz < g0ctz) {
1091             return GICV3_G1;
1092         }
1093         if (g0ctz < 32) {
1094             return GICV3_G0;
1095         }
1096     }
1097     /* No set active bits? UNPREDICTABLE; return -1 so the caller
1098      * ignores the spurious EOI attempt.
1099      */
1100     return -1;
1101 }
1102 
1103 static void icc_deactivate_irq(GICv3CPUState *cs, int irq)
1104 {
1105     if (irq < GIC_INTERNAL) {
1106         cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 0);
1107         gicv3_redist_update(cs);
1108     } else {
1109         gicv3_gicd_active_clear(cs->gic, irq);
1110         gicv3_update(cs->gic, irq, 1);
1111     }
1112 }
1113 
1114 static bool icv_eoi_split(CPUARMState *env, GICv3CPUState *cs)
1115 {
1116     /* Return true if we should split priority drop and interrupt
1117      * deactivation, ie whether the virtual EOIMode bit is set.
1118      */
1119     return cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM;
1120 }
1121 
1122 static int icv_find_active(GICv3CPUState *cs, int irq)
1123 {
1124     /* Given an interrupt number for an active interrupt, return the index
1125      * of the corresponding list register, or -1 if there is no match.
1126      * Corresponds to FindActiveVirtualInterrupt pseudocode.
1127      */
1128     int i;
1129 
1130     for (i = 0; i < cs->num_list_regs; i++) {
1131         uint64_t lr = cs->ich_lr_el2[i];
1132 
1133         if ((lr & ICH_LR_EL2_STATE_ACTIVE_BIT) && ich_lr_vintid(lr) == irq) {
1134             return i;
1135         }
1136     }
1137 
1138     return -1;
1139 }
1140 
1141 static void icv_deactivate_irq(GICv3CPUState *cs, int idx)
1142 {
1143     /* Deactivate the interrupt in the specified list register index */
1144     uint64_t lr = cs->ich_lr_el2[idx];
1145 
1146     if (lr & ICH_LR_EL2_HW) {
1147         /* Deactivate the associated physical interrupt */
1148         int pirq = ich_lr_pintid(lr);
1149 
1150         if (pirq < INTID_SECURE) {
1151             icc_deactivate_irq(cs, pirq);
1152         }
1153     }
1154 
1155     /* Clear the 'active' part of the state, so ActivePending->Pending
1156      * and Active->Invalid.
1157      */
1158     lr &= ~ICH_LR_EL2_STATE_ACTIVE_BIT;
1159     cs->ich_lr_el2[idx] = lr;
1160 }
1161 
1162 static void icv_increment_eoicount(GICv3CPUState *cs)
1163 {
1164     /* Increment the EOICOUNT field in ICH_HCR_EL2 */
1165     int eoicount = extract64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
1166                              ICH_HCR_EL2_EOICOUNT_LENGTH);
1167 
1168     cs->ich_hcr_el2 = deposit64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
1169                                 ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1);
1170 }
1171 
1172 static int icv_drop_prio(GICv3CPUState *cs)
1173 {
1174     /* Drop the priority of the currently active virtual interrupt
1175      * (favouring group 0 if there is a set active bit at
1176      * the same priority for both group 0 and group 1).
1177      * Return the priority value for the bit we just cleared,
1178      * or 0xff if no bits were set in the AP registers at all.
1179      * Note that though the ich_apr[] are uint64_t only the low
1180      * 32 bits are actually relevant.
1181      */
1182     int i;
1183     int aprmax = 1 << (cs->vprebits - 5);
1184 
1185     assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
1186 
1187     for (i = 0; i < aprmax; i++) {
1188         uint64_t *papr0 = &cs->ich_apr[GICV3_G0][i];
1189         uint64_t *papr1 = &cs->ich_apr[GICV3_G1NS][i];
1190         int apr0count, apr1count;
1191 
1192         if (!*papr0 && !*papr1) {
1193             continue;
1194         }
1195 
1196         /* We can't just use the bit-twiddling hack icc_drop_prio() does
1197          * because we need to return the bit number we cleared so
1198          * it can be compared against the list register's priority field.
1199          */
1200         apr0count = ctz32(*papr0);
1201         apr1count = ctz32(*papr1);
1202 
1203         if (apr0count <= apr1count) {
1204             *papr0 &= *papr0 - 1;
1205             return (apr0count + i * 32) << (icv_min_vbpr(cs) + 1);
1206         } else {
1207             *papr1 &= *papr1 - 1;
1208             return (apr1count + i * 32) << (icv_min_vbpr(cs) + 1);
1209         }
1210     }
1211     return 0xff;
1212 }
1213 
1214 static void icv_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1215                           uint64_t value)
1216 {
1217     /* Deactivate interrupt */
1218     GICv3CPUState *cs = icc_cs_from_env(env);
1219     int idx;
1220     int irq = value & 0xffffff;
1221 
1222     trace_gicv3_icv_dir_write(gicv3_redist_affid(cs), value);
1223 
1224     if (irq >= cs->gic->num_irq) {
1225         /* Also catches special interrupt numbers and LPIs */
1226         return;
1227     }
1228 
1229     if (!icv_eoi_split(env, cs)) {
1230         return;
1231     }
1232 
1233     idx = icv_find_active(cs, irq);
1234 
1235     if (idx < 0) {
1236         /* No list register matching this, so increment the EOI count
1237          * (might trigger a maintenance interrupt)
1238          */
1239         icv_increment_eoicount(cs);
1240     } else {
1241         icv_deactivate_irq(cs, idx);
1242     }
1243 
1244     gicv3_cpuif_virt_update(cs);
1245 }
1246 
1247 static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1248                            uint64_t value)
1249 {
1250     /* End of Interrupt */
1251     GICv3CPUState *cs = icc_cs_from_env(env);
1252     int irq = value & 0xffffff;
1253     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
1254     int idx, dropprio;
1255 
1256     trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1,
1257                                gicv3_redist_affid(cs), value);
1258 
1259     if (irq >= cs->gic->num_irq) {
1260         /* Also catches special interrupt numbers and LPIs */
1261         return;
1262     }
1263 
1264     /* We implement the IMPDEF choice of "drop priority before doing
1265      * error checks" (because that lets us avoid scanning the AP
1266      * registers twice).
1267      */
1268     dropprio = icv_drop_prio(cs);
1269     if (dropprio == 0xff) {
1270         /* No active interrupt. It is CONSTRAINED UNPREDICTABLE
1271          * whether the list registers are checked in this
1272          * situation; we choose not to.
1273          */
1274         return;
1275     }
1276 
1277     idx = icv_find_active(cs, irq);
1278 
1279     if (idx < 0) {
1280         /* No valid list register corresponding to EOI ID */
1281         icv_increment_eoicount(cs);
1282     } else {
1283         uint64_t lr = cs->ich_lr_el2[idx];
1284         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
1285         int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp);
1286 
1287         if (thisgrp == grp && lr_gprio == dropprio) {
1288             if (!icv_eoi_split(env, cs)) {
1289                 /* Priority drop and deactivate not split: deactivate irq now */
1290                 icv_deactivate_irq(cs, idx);
1291             }
1292         }
1293     }
1294 
1295     gicv3_cpuif_virt_update(cs);
1296 }
1297 
1298 static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1299                            uint64_t value)
1300 {
1301     /* End of Interrupt */
1302     GICv3CPUState *cs = icc_cs_from_env(env);
1303     int irq = value & 0xffffff;
1304     int grp;
1305 
1306     if (icv_access(env, ri->crm == 8 ? HCR_FMO : HCR_IMO)) {
1307         icv_eoir_write(env, ri, value);
1308         return;
1309     }
1310 
1311     trace_gicv3_icc_eoir_write(ri->crm == 8 ? 0 : 1,
1312                                gicv3_redist_affid(cs), value);
1313 
1314     if (ri->crm == 8) {
1315         /* EOIR0 */
1316         grp = GICV3_G0;
1317     } else {
1318         /* EOIR1 */
1319         if (arm_is_secure(env)) {
1320             grp = GICV3_G1;
1321         } else {
1322             grp = GICV3_G1NS;
1323         }
1324     }
1325 
1326     if (irq >= cs->gic->num_irq) {
1327         /* This handles two cases:
1328          * 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
1329          * to the GICC_EOIR, the GIC ignores that write.
1330          * 2. If software writes the number of a non-existent interrupt
1331          * this must be a subcase of "value written does not match the last
1332          * valid interrupt value read from the Interrupt Acknowledge
1333          * register" and so this is UNPREDICTABLE. We choose to ignore it.
1334          */
1335         return;
1336     }
1337 
1338     if (icc_highest_active_group(cs) != grp) {
1339         return;
1340     }
1341 
1342     icc_drop_prio(cs, grp);
1343 
1344     if (!icc_eoi_split(env, cs)) {
1345         /* Priority drop and deactivate not split: deactivate irq now */
1346         icc_deactivate_irq(cs, irq);
1347     }
1348 }
1349 
1350 static uint64_t icc_hppir0_read(CPUARMState *env, const ARMCPRegInfo *ri)
1351 {
1352     GICv3CPUState *cs = icc_cs_from_env(env);
1353     uint64_t value;
1354 
1355     if (icv_access(env, HCR_FMO)) {
1356         return icv_hppir_read(env, ri);
1357     }
1358 
1359     value = icc_hppir0_value(cs, env);
1360     trace_gicv3_icc_hppir0_read(gicv3_redist_affid(cs), value);
1361     return value;
1362 }
1363 
1364 static uint64_t icc_hppir1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1365 {
1366     GICv3CPUState *cs = icc_cs_from_env(env);
1367     uint64_t value;
1368 
1369     if (icv_access(env, HCR_IMO)) {
1370         return icv_hppir_read(env, ri);
1371     }
1372 
1373     value = icc_hppir1_value(cs, env);
1374     trace_gicv3_icc_hppir1_read(gicv3_redist_affid(cs), value);
1375     return value;
1376 }
1377 
1378 static uint64_t icc_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
1379 {
1380     GICv3CPUState *cs = icc_cs_from_env(env);
1381     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
1382     bool satinc = false;
1383     uint64_t bpr;
1384 
1385     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1386         return icv_bpr_read(env, ri);
1387     }
1388 
1389     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1390         grp = GICV3_G1NS;
1391     }
1392 
1393     if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
1394         (cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
1395         /* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
1396          * modify BPR0
1397          */
1398         grp = GICV3_G0;
1399     }
1400 
1401     if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
1402         (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
1403         /* reads return bpr0 + 1 sat to 7, writes ignored */
1404         grp = GICV3_G0;
1405         satinc = true;
1406     }
1407 
1408     bpr = cs->icc_bpr[grp];
1409     if (satinc) {
1410         bpr++;
1411         bpr = MIN(bpr, 7);
1412     }
1413 
1414     trace_gicv3_icc_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
1415 
1416     return bpr;
1417 }
1418 
1419 static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
1420                           uint64_t value)
1421 {
1422     GICv3CPUState *cs = icc_cs_from_env(env);
1423     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
1424     uint64_t minval;
1425 
1426     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1427         icv_bpr_write(env, ri, value);
1428         return;
1429     }
1430 
1431     trace_gicv3_icc_bpr_write(ri->crm == 8 ? 0 : 1,
1432                               gicv3_redist_affid(cs), value);
1433 
1434     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1435         grp = GICV3_G1NS;
1436     }
1437 
1438     if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
1439         (cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
1440         /* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
1441          * modify BPR0
1442          */
1443         grp = GICV3_G0;
1444     }
1445 
1446     if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
1447         (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
1448         /* reads return bpr0 + 1 sat to 7, writes ignored */
1449         return;
1450     }
1451 
1452     minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR;
1453     if (value < minval) {
1454         value = minval;
1455     }
1456 
1457     cs->icc_bpr[grp] = value & 7;
1458     gicv3_cpuif_update(cs);
1459 }
1460 
1461 static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
1462 {
1463     GICv3CPUState *cs = icc_cs_from_env(env);
1464     uint64_t value;
1465 
1466     int regno = ri->opc2 & 3;
1467     int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
1468 
1469     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1470         return icv_ap_read(env, ri);
1471     }
1472 
1473     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1474         grp = GICV3_G1NS;
1475     }
1476 
1477     value = cs->icc_apr[grp][regno];
1478 
1479     trace_gicv3_icc_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
1480     return value;
1481 }
1482 
1483 static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
1484                          uint64_t value)
1485 {
1486     GICv3CPUState *cs = icc_cs_from_env(env);
1487 
1488     int regno = ri->opc2 & 3;
1489     int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
1490 
1491     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1492         icv_ap_write(env, ri, value);
1493         return;
1494     }
1495 
1496     trace_gicv3_icc_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
1497 
1498     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1499         grp = GICV3_G1NS;
1500     }
1501 
1502     /* It's not possible to claim that a Non-secure interrupt is active
1503      * at a priority outside the Non-secure range (128..255), since this
1504      * would otherwise allow malicious NS code to block delivery of S interrupts
1505      * by writing a bad value to these registers.
1506      */
1507     if (grp == GICV3_G1NS && regno < 2 && arm_feature(env, ARM_FEATURE_EL3)) {
1508         return;
1509     }
1510 
1511     cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU;
1512     gicv3_cpuif_update(cs);
1513 }
1514 
1515 static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1516                           uint64_t value)
1517 {
1518     /* Deactivate interrupt */
1519     GICv3CPUState *cs = icc_cs_from_env(env);
1520     int irq = value & 0xffffff;
1521     bool irq_is_secure, single_sec_state, irq_is_grp0;
1522     bool route_fiq_to_el3, route_irq_to_el3, route_fiq_to_el2, route_irq_to_el2;
1523 
1524     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1525         icv_dir_write(env, ri, value);
1526         return;
1527     }
1528 
1529     trace_gicv3_icc_dir_write(gicv3_redist_affid(cs), value);
1530 
1531     if (irq >= cs->gic->num_irq) {
1532         /* Also catches special interrupt numbers and LPIs */
1533         return;
1534     }
1535 
1536     if (!icc_eoi_split(env, cs)) {
1537         return;
1538     }
1539 
1540     int grp = gicv3_irq_group(cs->gic, cs, irq);
1541 
1542     single_sec_state = cs->gic->gicd_ctlr & GICD_CTLR_DS;
1543     irq_is_secure = !single_sec_state && (grp != GICV3_G1NS);
1544     irq_is_grp0 = grp == GICV3_G0;
1545 
1546     /* Check whether we're allowed to deactivate this interrupt based
1547      * on its group and the current CPU state.
1548      * These checks are laid out to correspond to the spec's pseudocode.
1549      */
1550     route_fiq_to_el3 = env->cp15.scr_el3 & SCR_FIQ;
1551     route_irq_to_el3 = env->cp15.scr_el3 & SCR_IRQ;
1552     /* No need to include !IsSecure in route_*_to_el2 as it's only
1553      * tested in cases where we know !IsSecure is true.
1554      */
1555     route_fiq_to_el2 = arm_hcr_el2_fmo(env);
1556     route_irq_to_el2 = arm_hcr_el2_imo(env);
1557 
1558     switch (arm_current_el(env)) {
1559     case 3:
1560         break;
1561     case 2:
1562         if (single_sec_state && irq_is_grp0 && !route_fiq_to_el3) {
1563             break;
1564         }
1565         if (!irq_is_secure && !irq_is_grp0 && !route_irq_to_el3) {
1566             break;
1567         }
1568         return;
1569     case 1:
1570         if (!arm_is_secure_below_el3(env)) {
1571             if (single_sec_state && irq_is_grp0 &&
1572                 !route_fiq_to_el3 && !route_fiq_to_el2) {
1573                 break;
1574             }
1575             if (!irq_is_secure && !irq_is_grp0 &&
1576                 !route_irq_to_el3 && !route_irq_to_el2) {
1577                 break;
1578             }
1579         } else {
1580             if (irq_is_grp0 && !route_fiq_to_el3) {
1581                 break;
1582             }
1583             if (!irq_is_grp0 &&
1584                 (!irq_is_secure || !single_sec_state) &&
1585                 !route_irq_to_el3) {
1586                 break;
1587             }
1588         }
1589         return;
1590     default:
1591         g_assert_not_reached();
1592     }
1593 
1594     icc_deactivate_irq(cs, irq);
1595 }
1596 
1597 static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
1598 {
1599     GICv3CPUState *cs = icc_cs_from_env(env);
1600     int prio;
1601 
1602     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1603         return icv_rpr_read(env, ri);
1604     }
1605 
1606     prio = icc_highest_active_prio(cs);
1607 
1608     if (arm_feature(env, ARM_FEATURE_EL3) &&
1609         !arm_is_secure(env) && (env->cp15.scr_el3 & SCR_FIQ)) {
1610         /* NS GIC access and Group 0 is inaccessible to NS */
1611         if ((prio & 0x80) == 0) {
1612             /* NS mustn't see priorities in the Secure half of the range */
1613             prio = 0;
1614         } else if (prio != 0xff) {
1615             /* Non-idle priority: show the Non-secure view of it */
1616             prio = (prio << 1) & 0xff;
1617         }
1618     }
1619 
1620     trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio);
1621     return prio;
1622 }
1623 
1624 static void icc_generate_sgi(CPUARMState *env, GICv3CPUState *cs,
1625                              uint64_t value, int grp, bool ns)
1626 {
1627     GICv3State *s = cs->gic;
1628 
1629     /* Extract Aff3/Aff2/Aff1 and shift into the bottom 24 bits */
1630     uint64_t aff = extract64(value, 48, 8) << 16 |
1631         extract64(value, 32, 8) << 8 |
1632         extract64(value, 16, 8);
1633     uint32_t targetlist = extract64(value, 0, 16);
1634     uint32_t irq = extract64(value, 24, 4);
1635     bool irm = extract64(value, 40, 1);
1636     int i;
1637 
1638     if (grp == GICV3_G1 && s->gicd_ctlr & GICD_CTLR_DS) {
1639         /* If GICD_CTLR.DS == 1, the Distributor treats Secure Group 1
1640          * interrupts as Group 0 interrupts and must send Secure Group 0
1641          * interrupts to the target CPUs.
1642          */
1643         grp = GICV3_G0;
1644     }
1645 
1646     trace_gicv3_icc_generate_sgi(gicv3_redist_affid(cs), irq, irm,
1647                                  aff, targetlist);
1648 
1649     for (i = 0; i < s->num_cpu; i++) {
1650         GICv3CPUState *ocs = &s->cpu[i];
1651 
1652         if (irm) {
1653             /* IRM == 1 : route to all CPUs except self */
1654             if (cs == ocs) {
1655                 continue;
1656             }
1657         } else {
1658             /* IRM == 0 : route to Aff3.Aff2.Aff1.n for all n in [0..15]
1659              * where the corresponding bit is set in targetlist
1660              */
1661             int aff0;
1662 
1663             if (ocs->gicr_typer >> 40 != aff) {
1664                 continue;
1665             }
1666             aff0 = extract64(ocs->gicr_typer, 32, 8);
1667             if (aff0 > 15 || extract32(targetlist, aff0, 1) == 0) {
1668                 continue;
1669             }
1670         }
1671 
1672         /* The redistributor will check against its own GICR_NSACR as needed */
1673         gicv3_redist_send_sgi(ocs, grp, irq, ns);
1674     }
1675 }
1676 
1677 static void icc_sgi0r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1678                            uint64_t value)
1679 {
1680     /* Generate Secure Group 0 SGI. */
1681     GICv3CPUState *cs = icc_cs_from_env(env);
1682     bool ns = !arm_is_secure(env);
1683 
1684     icc_generate_sgi(env, cs, value, GICV3_G0, ns);
1685 }
1686 
1687 static void icc_sgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1688                            uint64_t value)
1689 {
1690     /* Generate Group 1 SGI for the current Security state */
1691     GICv3CPUState *cs = icc_cs_from_env(env);
1692     int grp;
1693     bool ns = !arm_is_secure(env);
1694 
1695     grp = ns ? GICV3_G1NS : GICV3_G1;
1696     icc_generate_sgi(env, cs, value, grp, ns);
1697 }
1698 
1699 static void icc_asgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1700                              uint64_t value)
1701 {
1702     /* Generate Group 1 SGI for the Security state that is not
1703      * the current state
1704      */
1705     GICv3CPUState *cs = icc_cs_from_env(env);
1706     int grp;
1707     bool ns = !arm_is_secure(env);
1708 
1709     grp = ns ? GICV3_G1 : GICV3_G1NS;
1710     icc_generate_sgi(env, cs, value, grp, ns);
1711 }
1712 
1713 static uint64_t icc_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
1714 {
1715     GICv3CPUState *cs = icc_cs_from_env(env);
1716     int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
1717     uint64_t value;
1718 
1719     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1720         return icv_igrpen_read(env, ri);
1721     }
1722 
1723     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1724         grp = GICV3_G1NS;
1725     }
1726 
1727     value = cs->icc_igrpen[grp];
1728     trace_gicv3_icc_igrpen_read(ri->opc2 & 1 ? 1 : 0,
1729                                 gicv3_redist_affid(cs), value);
1730     return value;
1731 }
1732 
1733 static void icc_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
1734                              uint64_t value)
1735 {
1736     GICv3CPUState *cs = icc_cs_from_env(env);
1737     int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
1738 
1739     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1740         icv_igrpen_write(env, ri, value);
1741         return;
1742     }
1743 
1744     trace_gicv3_icc_igrpen_write(ri->opc2 & 1 ? 1 : 0,
1745                                  gicv3_redist_affid(cs), value);
1746 
1747     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1748         grp = GICV3_G1NS;
1749     }
1750 
1751     cs->icc_igrpen[grp] = value & ICC_IGRPEN_ENABLE;
1752     gicv3_cpuif_update(cs);
1753 }
1754 
1755 static uint64_t icc_igrpen1_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
1756 {
1757     GICv3CPUState *cs = icc_cs_from_env(env);
1758     uint64_t value;
1759 
1760     /* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
1761     value = cs->icc_igrpen[GICV3_G1NS] | (cs->icc_igrpen[GICV3_G1] << 1);
1762     trace_gicv3_icc_igrpen1_el3_read(gicv3_redist_affid(cs), value);
1763     return value;
1764 }
1765 
1766 static void icc_igrpen1_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
1767                                   uint64_t value)
1768 {
1769     GICv3CPUState *cs = icc_cs_from_env(env);
1770 
1771     trace_gicv3_icc_igrpen1_el3_write(gicv3_redist_affid(cs), value);
1772 
1773     /* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
1774     cs->icc_igrpen[GICV3_G1NS] = extract32(value, 0, 1);
1775     cs->icc_igrpen[GICV3_G1] = extract32(value, 1, 1);
1776     gicv3_cpuif_update(cs);
1777 }
1778 
1779 static uint64_t icc_ctlr_el1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1780 {
1781     GICv3CPUState *cs = icc_cs_from_env(env);
1782     int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
1783     uint64_t value;
1784 
1785     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1786         return icv_ctlr_read(env, ri);
1787     }
1788 
1789     value = cs->icc_ctlr_el1[bank];
1790     trace_gicv3_icc_ctlr_read(gicv3_redist_affid(cs), value);
1791     return value;
1792 }
1793 
1794 static void icc_ctlr_el1_write(CPUARMState *env, const ARMCPRegInfo *ri,
1795                                uint64_t value)
1796 {
1797     GICv3CPUState *cs = icc_cs_from_env(env);
1798     int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
1799     uint64_t mask;
1800 
1801     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1802         icv_ctlr_write(env, ri, value);
1803         return;
1804     }
1805 
1806     trace_gicv3_icc_ctlr_write(gicv3_redist_affid(cs), value);
1807 
1808     /* Only CBPR and EOIMODE can be RW;
1809      * for us PMHE is RAZ/WI (we don't implement 1-of-N interrupts or
1810      * the asseciated priority-based routing of them);
1811      * if EL3 is implemented and GICD_CTLR.DS == 0, then PMHE and CBPR are RO.
1812      */
1813     if (arm_feature(env, ARM_FEATURE_EL3) &&
1814         ((cs->gic->gicd_ctlr & GICD_CTLR_DS) == 0)) {
1815         mask = ICC_CTLR_EL1_EOIMODE;
1816     } else {
1817         mask = ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE;
1818     }
1819 
1820     cs->icc_ctlr_el1[bank] &= ~mask;
1821     cs->icc_ctlr_el1[bank] |= (value & mask);
1822     gicv3_cpuif_update(cs);
1823 }
1824 
1825 
1826 static uint64_t icc_ctlr_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
1827 {
1828     GICv3CPUState *cs = icc_cs_from_env(env);
1829     uint64_t value;
1830 
1831     value = cs->icc_ctlr_el3;
1832     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
1833         value |= ICC_CTLR_EL3_EOIMODE_EL1NS;
1834     }
1835     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
1836         value |= ICC_CTLR_EL3_CBPR_EL1NS;
1837     }
1838     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
1839         value |= ICC_CTLR_EL3_EOIMODE_EL1S;
1840     }
1841     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
1842         value |= ICC_CTLR_EL3_CBPR_EL1S;
1843     }
1844 
1845     trace_gicv3_icc_ctlr_el3_read(gicv3_redist_affid(cs), value);
1846     return value;
1847 }
1848 
1849 static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
1850                                uint64_t value)
1851 {
1852     GICv3CPUState *cs = icc_cs_from_env(env);
1853     uint64_t mask;
1854 
1855     trace_gicv3_icc_ctlr_el3_write(gicv3_redist_affid(cs), value);
1856 
1857     /* *_EL1NS and *_EL1S bits are aliases into the ICC_CTLR_EL1 bits. */
1858     cs->icc_ctlr_el1[GICV3_NS] &= (ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
1859     if (value & ICC_CTLR_EL3_EOIMODE_EL1NS) {
1860         cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_EOIMODE;
1861     }
1862     if (value & ICC_CTLR_EL3_CBPR_EL1NS) {
1863         cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_CBPR;
1864     }
1865 
1866     cs->icc_ctlr_el1[GICV3_S] &= (ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
1867     if (value & ICC_CTLR_EL3_EOIMODE_EL1S) {
1868         cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_EOIMODE;
1869     }
1870     if (value & ICC_CTLR_EL3_CBPR_EL1S) {
1871         cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_CBPR;
1872     }
1873 
1874     /* The only bit stored in icc_ctlr_el3 which is writeable is EOIMODE_EL3: */
1875     mask = ICC_CTLR_EL3_EOIMODE_EL3;
1876 
1877     cs->icc_ctlr_el3 &= ~mask;
1878     cs->icc_ctlr_el3 |= (value & mask);
1879     gicv3_cpuif_update(cs);
1880 }
1881 
1882 static CPAccessResult gicv3_irqfiq_access(CPUARMState *env,
1883                                           const ARMCPRegInfo *ri, bool isread)
1884 {
1885     CPAccessResult r = CP_ACCESS_OK;
1886     GICv3CPUState *cs = icc_cs_from_env(env);
1887     int el = arm_current_el(env);
1888 
1889     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TC) &&
1890         el == 1 && !arm_is_secure_below_el3(env)) {
1891         /* Takes priority over a possible EL3 trap */
1892         return CP_ACCESS_TRAP_EL2;
1893     }
1894 
1895     if ((env->cp15.scr_el3 & (SCR_FIQ | SCR_IRQ)) == (SCR_FIQ | SCR_IRQ)) {
1896         switch (el) {
1897         case 1:
1898             if (arm_is_secure_below_el3(env) ||
1899                 (arm_hcr_el2_imo(env) == 0 && arm_hcr_el2_fmo(env) == 0)) {
1900                 r = CP_ACCESS_TRAP_EL3;
1901             }
1902             break;
1903         case 2:
1904             r = CP_ACCESS_TRAP_EL3;
1905             break;
1906         case 3:
1907             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
1908                 r = CP_ACCESS_TRAP_EL3;
1909             }
1910             break;
1911         default:
1912             g_assert_not_reached();
1913         }
1914     }
1915 
1916     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
1917         r = CP_ACCESS_TRAP;
1918     }
1919     return r;
1920 }
1921 
1922 static CPAccessResult gicv3_dir_access(CPUARMState *env,
1923                                        const ARMCPRegInfo *ri, bool isread)
1924 {
1925     GICv3CPUState *cs = icc_cs_from_env(env);
1926 
1927     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TDIR) &&
1928         arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) {
1929         /* Takes priority over a possible EL3 trap */
1930         return CP_ACCESS_TRAP_EL2;
1931     }
1932 
1933     return gicv3_irqfiq_access(env, ri, isread);
1934 }
1935 
1936 static CPAccessResult gicv3_sgi_access(CPUARMState *env,
1937                                        const ARMCPRegInfo *ri, bool isread)
1938 {
1939     if ((arm_hcr_el2_imo(env) || arm_hcr_el2_fmo(env)) &&
1940         arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) {
1941         /* Takes priority over a possible EL3 trap */
1942         return CP_ACCESS_TRAP_EL2;
1943     }
1944 
1945     return gicv3_irqfiq_access(env, ri, isread);
1946 }
1947 
1948 static CPAccessResult gicv3_fiq_access(CPUARMState *env,
1949                                        const ARMCPRegInfo *ri, bool isread)
1950 {
1951     CPAccessResult r = CP_ACCESS_OK;
1952     GICv3CPUState *cs = icc_cs_from_env(env);
1953     int el = arm_current_el(env);
1954 
1955     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL0) &&
1956         el == 1 && !arm_is_secure_below_el3(env)) {
1957         /* Takes priority over a possible EL3 trap */
1958         return CP_ACCESS_TRAP_EL2;
1959     }
1960 
1961     if (env->cp15.scr_el3 & SCR_FIQ) {
1962         switch (el) {
1963         case 1:
1964             if (arm_is_secure_below_el3(env) || !arm_hcr_el2_fmo(env)) {
1965                 r = CP_ACCESS_TRAP_EL3;
1966             }
1967             break;
1968         case 2:
1969             r = CP_ACCESS_TRAP_EL3;
1970             break;
1971         case 3:
1972             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
1973                 r = CP_ACCESS_TRAP_EL3;
1974             }
1975             break;
1976         default:
1977             g_assert_not_reached();
1978         }
1979     }
1980 
1981     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
1982         r = CP_ACCESS_TRAP;
1983     }
1984     return r;
1985 }
1986 
1987 static CPAccessResult gicv3_irq_access(CPUARMState *env,
1988                                        const ARMCPRegInfo *ri, bool isread)
1989 {
1990     CPAccessResult r = CP_ACCESS_OK;
1991     GICv3CPUState *cs = icc_cs_from_env(env);
1992     int el = arm_current_el(env);
1993 
1994     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL1) &&
1995         el == 1 && !arm_is_secure_below_el3(env)) {
1996         /* Takes priority over a possible EL3 trap */
1997         return CP_ACCESS_TRAP_EL2;
1998     }
1999 
2000     if (env->cp15.scr_el3 & SCR_IRQ) {
2001         switch (el) {
2002         case 1:
2003             if (arm_is_secure_below_el3(env) || !arm_hcr_el2_imo(env)) {
2004                 r = CP_ACCESS_TRAP_EL3;
2005             }
2006             break;
2007         case 2:
2008             r = CP_ACCESS_TRAP_EL3;
2009             break;
2010         case 3:
2011             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
2012                 r = CP_ACCESS_TRAP_EL3;
2013             }
2014             break;
2015         default:
2016             g_assert_not_reached();
2017         }
2018     }
2019 
2020     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
2021         r = CP_ACCESS_TRAP;
2022     }
2023     return r;
2024 }
2025 
2026 static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
2027 {
2028     GICv3CPUState *cs = icc_cs_from_env(env);
2029 
2030     cs->icc_ctlr_el1[GICV3_S] = ICC_CTLR_EL1_A3V |
2031         (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
2032         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
2033     cs->icc_ctlr_el1[GICV3_NS] = ICC_CTLR_EL1_A3V |
2034         (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
2035         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
2036     cs->icc_pmr_el1 = 0;
2037     cs->icc_bpr[GICV3_G0] = GIC_MIN_BPR;
2038     cs->icc_bpr[GICV3_G1] = GIC_MIN_BPR;
2039     cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR_NS;
2040     memset(cs->icc_apr, 0, sizeof(cs->icc_apr));
2041     memset(cs->icc_igrpen, 0, sizeof(cs->icc_igrpen));
2042     cs->icc_ctlr_el3 = ICC_CTLR_EL3_NDS | ICC_CTLR_EL3_A3V |
2043         (1 << ICC_CTLR_EL3_IDBITS_SHIFT) |
2044         (7 << ICC_CTLR_EL3_PRIBITS_SHIFT);
2045 
2046     memset(cs->ich_apr, 0, sizeof(cs->ich_apr));
2047     cs->ich_hcr_el2 = 0;
2048     memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2));
2049     cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN |
2050         ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) |
2051         (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT);
2052 }
2053 
2054 static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
2055     { .name = "ICC_PMR_EL1", .state = ARM_CP_STATE_BOTH,
2056       .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 6, .opc2 = 0,
2057       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2058       .access = PL1_RW, .accessfn = gicv3_irqfiq_access,
2059       .readfn = icc_pmr_read,
2060       .writefn = icc_pmr_write,
2061       /* We hang the whole cpu interface reset routine off here
2062        * rather than parcelling it out into one little function
2063        * per register
2064        */
2065       .resetfn = icc_reset,
2066     },
2067     { .name = "ICC_IAR0_EL1", .state = ARM_CP_STATE_BOTH,
2068       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 0,
2069       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2070       .access = PL1_R, .accessfn = gicv3_fiq_access,
2071       .readfn = icc_iar0_read,
2072     },
2073     { .name = "ICC_EOIR0_EL1", .state = ARM_CP_STATE_BOTH,
2074       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 1,
2075       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2076       .access = PL1_W, .accessfn = gicv3_fiq_access,
2077       .writefn = icc_eoir_write,
2078     },
2079     { .name = "ICC_HPPIR0_EL1", .state = ARM_CP_STATE_BOTH,
2080       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 2,
2081       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2082       .access = PL1_R, .accessfn = gicv3_fiq_access,
2083       .readfn = icc_hppir0_read,
2084     },
2085     { .name = "ICC_BPR0_EL1", .state = ARM_CP_STATE_BOTH,
2086       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 3,
2087       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2088       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2089       .readfn = icc_bpr_read,
2090       .writefn = icc_bpr_write,
2091     },
2092     { .name = "ICC_AP0R0_EL1", .state = ARM_CP_STATE_BOTH,
2093       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 4,
2094       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2095       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2096       .readfn = icc_ap_read,
2097       .writefn = icc_ap_write,
2098     },
2099     { .name = "ICC_AP0R1_EL1", .state = ARM_CP_STATE_BOTH,
2100       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 5,
2101       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2102       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2103       .readfn = icc_ap_read,
2104       .writefn = icc_ap_write,
2105     },
2106     { .name = "ICC_AP0R2_EL1", .state = ARM_CP_STATE_BOTH,
2107       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 6,
2108       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2109       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2110       .readfn = icc_ap_read,
2111       .writefn = icc_ap_write,
2112     },
2113     { .name = "ICC_AP0R3_EL1", .state = ARM_CP_STATE_BOTH,
2114       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 7,
2115       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2116       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2117       .readfn = icc_ap_read,
2118       .writefn = icc_ap_write,
2119     },
2120     /* All the ICC_AP1R*_EL1 registers are banked */
2121     { .name = "ICC_AP1R0_EL1", .state = ARM_CP_STATE_BOTH,
2122       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 0,
2123       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2124       .access = PL1_RW, .accessfn = gicv3_irq_access,
2125       .readfn = icc_ap_read,
2126       .writefn = icc_ap_write,
2127     },
2128     { .name = "ICC_AP1R1_EL1", .state = ARM_CP_STATE_BOTH,
2129       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 1,
2130       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2131       .access = PL1_RW, .accessfn = gicv3_irq_access,
2132       .readfn = icc_ap_read,
2133       .writefn = icc_ap_write,
2134     },
2135     { .name = "ICC_AP1R2_EL1", .state = ARM_CP_STATE_BOTH,
2136       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 2,
2137       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2138       .access = PL1_RW, .accessfn = gicv3_irq_access,
2139       .readfn = icc_ap_read,
2140       .writefn = icc_ap_write,
2141     },
2142     { .name = "ICC_AP1R3_EL1", .state = ARM_CP_STATE_BOTH,
2143       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 3,
2144       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2145       .access = PL1_RW, .accessfn = gicv3_irq_access,
2146       .readfn = icc_ap_read,
2147       .writefn = icc_ap_write,
2148     },
2149     { .name = "ICC_DIR_EL1", .state = ARM_CP_STATE_BOTH,
2150       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 1,
2151       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2152       .access = PL1_W, .accessfn = gicv3_dir_access,
2153       .writefn = icc_dir_write,
2154     },
2155     { .name = "ICC_RPR_EL1", .state = ARM_CP_STATE_BOTH,
2156       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 3,
2157       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2158       .access = PL1_R, .accessfn = gicv3_irqfiq_access,
2159       .readfn = icc_rpr_read,
2160     },
2161     { .name = "ICC_SGI1R_EL1", .state = ARM_CP_STATE_AA64,
2162       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 5,
2163       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2164       .access = PL1_W, .accessfn = gicv3_sgi_access,
2165       .writefn = icc_sgi1r_write,
2166     },
2167     { .name = "ICC_SGI1R",
2168       .cp = 15, .opc1 = 0, .crm = 12,
2169       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2170       .access = PL1_W, .accessfn = gicv3_sgi_access,
2171       .writefn = icc_sgi1r_write,
2172     },
2173     { .name = "ICC_ASGI1R_EL1", .state = ARM_CP_STATE_AA64,
2174       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 6,
2175       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2176       .access = PL1_W, .accessfn = gicv3_sgi_access,
2177       .writefn = icc_asgi1r_write,
2178     },
2179     { .name = "ICC_ASGI1R",
2180       .cp = 15, .opc1 = 1, .crm = 12,
2181       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2182       .access = PL1_W, .accessfn = gicv3_sgi_access,
2183       .writefn = icc_asgi1r_write,
2184     },
2185     { .name = "ICC_SGI0R_EL1", .state = ARM_CP_STATE_AA64,
2186       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 7,
2187       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2188       .access = PL1_W, .accessfn = gicv3_sgi_access,
2189       .writefn = icc_sgi0r_write,
2190     },
2191     { .name = "ICC_SGI0R",
2192       .cp = 15, .opc1 = 2, .crm = 12,
2193       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2194       .access = PL1_W, .accessfn = gicv3_sgi_access,
2195       .writefn = icc_sgi0r_write,
2196     },
2197     { .name = "ICC_IAR1_EL1", .state = ARM_CP_STATE_BOTH,
2198       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 0,
2199       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2200       .access = PL1_R, .accessfn = gicv3_irq_access,
2201       .readfn = icc_iar1_read,
2202     },
2203     { .name = "ICC_EOIR1_EL1", .state = ARM_CP_STATE_BOTH,
2204       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 1,
2205       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2206       .access = PL1_W, .accessfn = gicv3_irq_access,
2207       .writefn = icc_eoir_write,
2208     },
2209     { .name = "ICC_HPPIR1_EL1", .state = ARM_CP_STATE_BOTH,
2210       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 2,
2211       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2212       .access = PL1_R, .accessfn = gicv3_irq_access,
2213       .readfn = icc_hppir1_read,
2214     },
2215     /* This register is banked */
2216     { .name = "ICC_BPR1_EL1", .state = ARM_CP_STATE_BOTH,
2217       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 3,
2218       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2219       .access = PL1_RW, .accessfn = gicv3_irq_access,
2220       .readfn = icc_bpr_read,
2221       .writefn = icc_bpr_write,
2222     },
2223     /* This register is banked */
2224     { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH,
2225       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4,
2226       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2227       .access = PL1_RW, .accessfn = gicv3_irqfiq_access,
2228       .readfn = icc_ctlr_el1_read,
2229       .writefn = icc_ctlr_el1_write,
2230     },
2231     { .name = "ICC_SRE_EL1", .state = ARM_CP_STATE_BOTH,
2232       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 5,
2233       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2234       .access = PL1_RW,
2235       /* We don't support IRQ/FIQ bypass and system registers are
2236        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2237        * This register is banked but since it's constant we don't
2238        * need to do anything special.
2239        */
2240       .resetvalue = 0x7,
2241     },
2242     { .name = "ICC_IGRPEN0_EL1", .state = ARM_CP_STATE_BOTH,
2243       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 6,
2244       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2245       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2246       .readfn = icc_igrpen_read,
2247       .writefn = icc_igrpen_write,
2248     },
2249     /* This register is banked */
2250     { .name = "ICC_IGRPEN1_EL1", .state = ARM_CP_STATE_BOTH,
2251       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 7,
2252       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2253       .access = PL1_RW, .accessfn = gicv3_irq_access,
2254       .readfn = icc_igrpen_read,
2255       .writefn = icc_igrpen_write,
2256     },
2257     { .name = "ICC_SRE_EL2", .state = ARM_CP_STATE_BOTH,
2258       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 5,
2259       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2260       .access = PL2_RW,
2261       /* We don't support IRQ/FIQ bypass and system registers are
2262        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2263        */
2264       .resetvalue = 0xf,
2265     },
2266     { .name = "ICC_CTLR_EL3", .state = ARM_CP_STATE_BOTH,
2267       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 4,
2268       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2269       .access = PL3_RW,
2270       .readfn = icc_ctlr_el3_read,
2271       .writefn = icc_ctlr_el3_write,
2272     },
2273     { .name = "ICC_SRE_EL3", .state = ARM_CP_STATE_BOTH,
2274       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 5,
2275       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2276       .access = PL3_RW,
2277       /* We don't support IRQ/FIQ bypass and system registers are
2278        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2279        */
2280       .resetvalue = 0xf,
2281     },
2282     { .name = "ICC_IGRPEN1_EL3", .state = ARM_CP_STATE_BOTH,
2283       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 7,
2284       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2285       .access = PL3_RW,
2286       .readfn = icc_igrpen1_el3_read,
2287       .writefn = icc_igrpen1_el3_write,
2288     },
2289     REGINFO_SENTINEL
2290 };
2291 
2292 static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
2293 {
2294     GICv3CPUState *cs = icc_cs_from_env(env);
2295     int regno = ri->opc2 & 3;
2296     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
2297     uint64_t value;
2298 
2299     value = cs->ich_apr[grp][regno];
2300     trace_gicv3_ich_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
2301     return value;
2302 }
2303 
2304 static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
2305                          uint64_t value)
2306 {
2307     GICv3CPUState *cs = icc_cs_from_env(env);
2308     int regno = ri->opc2 & 3;
2309     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
2310 
2311     trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
2312 
2313     cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
2314     gicv3_cpuif_virt_update(cs);
2315 }
2316 
2317 static uint64_t ich_hcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2318 {
2319     GICv3CPUState *cs = icc_cs_from_env(env);
2320     uint64_t value = cs->ich_hcr_el2;
2321 
2322     trace_gicv3_ich_hcr_read(gicv3_redist_affid(cs), value);
2323     return value;
2324 }
2325 
2326 static void ich_hcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2327                           uint64_t value)
2328 {
2329     GICv3CPUState *cs = icc_cs_from_env(env);
2330 
2331     trace_gicv3_ich_hcr_write(gicv3_redist_affid(cs), value);
2332 
2333     value &= ICH_HCR_EL2_EN | ICH_HCR_EL2_UIE | ICH_HCR_EL2_LRENPIE |
2334         ICH_HCR_EL2_NPIE | ICH_HCR_EL2_VGRP0EIE | ICH_HCR_EL2_VGRP0DIE |
2335         ICH_HCR_EL2_VGRP1EIE | ICH_HCR_EL2_VGRP1DIE | ICH_HCR_EL2_TC |
2336         ICH_HCR_EL2_TALL0 | ICH_HCR_EL2_TALL1 | ICH_HCR_EL2_TSEI |
2337         ICH_HCR_EL2_TDIR | ICH_HCR_EL2_EOICOUNT_MASK;
2338 
2339     cs->ich_hcr_el2 = value;
2340     gicv3_cpuif_virt_update(cs);
2341 }
2342 
2343 static uint64_t ich_vmcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2344 {
2345     GICv3CPUState *cs = icc_cs_from_env(env);
2346     uint64_t value = cs->ich_vmcr_el2;
2347 
2348     trace_gicv3_ich_vmcr_read(gicv3_redist_affid(cs), value);
2349     return value;
2350 }
2351 
2352 static void ich_vmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2353                          uint64_t value)
2354 {
2355     GICv3CPUState *cs = icc_cs_from_env(env);
2356 
2357     trace_gicv3_ich_vmcr_write(gicv3_redist_affid(cs), value);
2358 
2359     value &= ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1 | ICH_VMCR_EL2_VCBPR |
2360         ICH_VMCR_EL2_VEOIM | ICH_VMCR_EL2_VBPR1_MASK |
2361         ICH_VMCR_EL2_VBPR0_MASK | ICH_VMCR_EL2_VPMR_MASK;
2362     value |= ICH_VMCR_EL2_VFIQEN;
2363 
2364     cs->ich_vmcr_el2 = value;
2365     /* Enforce "writing BPRs to less than minimum sets them to the minimum"
2366      * by reading and writing back the fields.
2367      */
2368     write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G0));
2369     write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G1));
2370 
2371     gicv3_cpuif_virt_update(cs);
2372 }
2373 
2374 static uint64_t ich_lr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2375 {
2376     GICv3CPUState *cs = icc_cs_from_env(env);
2377     int regno = ri->opc2 | ((ri->crm & 1) << 3);
2378     uint64_t value;
2379 
2380     /* This read function handles all of:
2381      * 64-bit reads of the whole LR
2382      * 32-bit reads of the low half of the LR
2383      * 32-bit reads of the high half of the LR
2384      */
2385     if (ri->state == ARM_CP_STATE_AA32) {
2386         if (ri->crm >= 14) {
2387             value = extract64(cs->ich_lr_el2[regno], 32, 32);
2388             trace_gicv3_ich_lrc_read(regno, gicv3_redist_affid(cs), value);
2389         } else {
2390             value = extract64(cs->ich_lr_el2[regno], 0, 32);
2391             trace_gicv3_ich_lr32_read(regno, gicv3_redist_affid(cs), value);
2392         }
2393     } else {
2394         value = cs->ich_lr_el2[regno];
2395         trace_gicv3_ich_lr_read(regno, gicv3_redist_affid(cs), value);
2396     }
2397 
2398     return value;
2399 }
2400 
2401 static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2402                          uint64_t value)
2403 {
2404     GICv3CPUState *cs = icc_cs_from_env(env);
2405     int regno = ri->opc2 | ((ri->crm & 1) << 3);
2406 
2407     /* This write function handles all of:
2408      * 64-bit writes to the whole LR
2409      * 32-bit writes to the low half of the LR
2410      * 32-bit writes to the high half of the LR
2411      */
2412     if (ri->state == ARM_CP_STATE_AA32) {
2413         if (ri->crm >= 14) {
2414             trace_gicv3_ich_lrc_write(regno, gicv3_redist_affid(cs), value);
2415             value = deposit64(cs->ich_lr_el2[regno], 32, 32, value);
2416         } else {
2417             trace_gicv3_ich_lr32_write(regno, gicv3_redist_affid(cs), value);
2418             value = deposit64(cs->ich_lr_el2[regno], 0, 32, value);
2419         }
2420     } else {
2421         trace_gicv3_ich_lr_write(regno, gicv3_redist_affid(cs), value);
2422     }
2423 
2424     /* Enforce RES0 bits in priority field */
2425     if (cs->vpribits < 8) {
2426         value = deposit64(value, ICH_LR_EL2_PRIORITY_SHIFT,
2427                           8 - cs->vpribits, 0);
2428     }
2429 
2430     cs->ich_lr_el2[regno] = value;
2431     gicv3_cpuif_virt_update(cs);
2432 }
2433 
2434 static uint64_t ich_vtr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2435 {
2436     GICv3CPUState *cs = icc_cs_from_env(env);
2437     uint64_t value;
2438 
2439     value = ((cs->num_list_regs - 1) << ICH_VTR_EL2_LISTREGS_SHIFT)
2440         | ICH_VTR_EL2_TDS | ICH_VTR_EL2_NV4 | ICH_VTR_EL2_A3V
2441         | (1 << ICH_VTR_EL2_IDBITS_SHIFT)
2442         | ((cs->vprebits - 1) << ICH_VTR_EL2_PREBITS_SHIFT)
2443         | ((cs->vpribits - 1) << ICH_VTR_EL2_PRIBITS_SHIFT);
2444 
2445     trace_gicv3_ich_vtr_read(gicv3_redist_affid(cs), value);
2446     return value;
2447 }
2448 
2449 static uint64_t ich_misr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2450 {
2451     GICv3CPUState *cs = icc_cs_from_env(env);
2452     uint64_t value = maintenance_interrupt_state(cs);
2453 
2454     trace_gicv3_ich_misr_read(gicv3_redist_affid(cs), value);
2455     return value;
2456 }
2457 
2458 static uint64_t ich_eisr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2459 {
2460     GICv3CPUState *cs = icc_cs_from_env(env);
2461     uint64_t value = eoi_maintenance_interrupt_state(cs, NULL);
2462 
2463     trace_gicv3_ich_eisr_read(gicv3_redist_affid(cs), value);
2464     return value;
2465 }
2466 
2467 static uint64_t ich_elrsr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2468 {
2469     GICv3CPUState *cs = icc_cs_from_env(env);
2470     uint64_t value = 0;
2471     int i;
2472 
2473     for (i = 0; i < cs->num_list_regs; i++) {
2474         uint64_t lr = cs->ich_lr_el2[i];
2475 
2476         if ((lr & ICH_LR_EL2_STATE_MASK) == 0 &&
2477             ((lr & ICH_LR_EL2_HW) != 0 || (lr & ICH_LR_EL2_EOI) == 0)) {
2478             value |= (1 << i);
2479         }
2480     }
2481 
2482     trace_gicv3_ich_elrsr_read(gicv3_redist_affid(cs), value);
2483     return value;
2484 }
2485 
2486 static const ARMCPRegInfo gicv3_cpuif_hcr_reginfo[] = {
2487     { .name = "ICH_AP0R0_EL2", .state = ARM_CP_STATE_BOTH,
2488       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 0,
2489       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2490       .access = PL2_RW,
2491       .readfn = ich_ap_read,
2492       .writefn = ich_ap_write,
2493     },
2494     { .name = "ICH_AP1R0_EL2", .state = ARM_CP_STATE_BOTH,
2495       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 0,
2496       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2497       .access = PL2_RW,
2498       .readfn = ich_ap_read,
2499       .writefn = ich_ap_write,
2500     },
2501     { .name = "ICH_HCR_EL2", .state = ARM_CP_STATE_BOTH,
2502       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 0,
2503       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2504       .access = PL2_RW,
2505       .readfn = ich_hcr_read,
2506       .writefn = ich_hcr_write,
2507     },
2508     { .name = "ICH_VTR_EL2", .state = ARM_CP_STATE_BOTH,
2509       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 1,
2510       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2511       .access = PL2_R,
2512       .readfn = ich_vtr_read,
2513     },
2514     { .name = "ICH_MISR_EL2", .state = ARM_CP_STATE_BOTH,
2515       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 2,
2516       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2517       .access = PL2_R,
2518       .readfn = ich_misr_read,
2519     },
2520     { .name = "ICH_EISR_EL2", .state = ARM_CP_STATE_BOTH,
2521       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 3,
2522       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2523       .access = PL2_R,
2524       .readfn = ich_eisr_read,
2525     },
2526     { .name = "ICH_ELRSR_EL2", .state = ARM_CP_STATE_BOTH,
2527       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 5,
2528       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2529       .access = PL2_R,
2530       .readfn = ich_elrsr_read,
2531     },
2532     { .name = "ICH_VMCR_EL2", .state = ARM_CP_STATE_BOTH,
2533       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 7,
2534       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2535       .access = PL2_RW,
2536       .readfn = ich_vmcr_read,
2537       .writefn = ich_vmcr_write,
2538     },
2539     REGINFO_SENTINEL
2540 };
2541 
2542 static const ARMCPRegInfo gicv3_cpuif_ich_apxr1_reginfo[] = {
2543     { .name = "ICH_AP0R1_EL2", .state = ARM_CP_STATE_BOTH,
2544       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 1,
2545       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2546       .access = PL2_RW,
2547       .readfn = ich_ap_read,
2548       .writefn = ich_ap_write,
2549     },
2550     { .name = "ICH_AP1R1_EL2", .state = ARM_CP_STATE_BOTH,
2551       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 1,
2552       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2553       .access = PL2_RW,
2554       .readfn = ich_ap_read,
2555       .writefn = ich_ap_write,
2556     },
2557     REGINFO_SENTINEL
2558 };
2559 
2560 static const ARMCPRegInfo gicv3_cpuif_ich_apxr23_reginfo[] = {
2561     { .name = "ICH_AP0R2_EL2", .state = ARM_CP_STATE_BOTH,
2562       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 2,
2563       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2564       .access = PL2_RW,
2565       .readfn = ich_ap_read,
2566       .writefn = ich_ap_write,
2567     },
2568     { .name = "ICH_AP0R3_EL2", .state = ARM_CP_STATE_BOTH,
2569       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 3,
2570       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2571       .access = PL2_RW,
2572       .readfn = ich_ap_read,
2573       .writefn = ich_ap_write,
2574     },
2575     { .name = "ICH_AP1R2_EL2", .state = ARM_CP_STATE_BOTH,
2576       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 2,
2577       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2578       .access = PL2_RW,
2579       .readfn = ich_ap_read,
2580       .writefn = ich_ap_write,
2581     },
2582     { .name = "ICH_AP1R3_EL2", .state = ARM_CP_STATE_BOTH,
2583       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 3,
2584       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2585       .access = PL2_RW,
2586       .readfn = ich_ap_read,
2587       .writefn = ich_ap_write,
2588     },
2589     REGINFO_SENTINEL
2590 };
2591 
2592 static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque)
2593 {
2594     GICv3CPUState *cs = opaque;
2595 
2596     gicv3_cpuif_update(cs);
2597 }
2598 
2599 void gicv3_init_cpuif(GICv3State *s)
2600 {
2601     /* Called from the GICv3 realize function; register our system
2602      * registers with the CPU
2603      */
2604     int i;
2605 
2606     for (i = 0; i < s->num_cpu; i++) {
2607         ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
2608         GICv3CPUState *cs = &s->cpu[i];
2609 
2610         /* Note that we can't just use the GICv3CPUState as an opaque pointer
2611          * in define_arm_cp_regs_with_opaque(), because when we're called back
2612          * it might be with code translated by CPU 0 but run by CPU 1, in
2613          * which case we'd get the wrong value.
2614          * So instead we define the regs with no ri->opaque info, and
2615          * get back to the GICv3CPUState from the CPUARMState.
2616          */
2617         define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
2618         if (arm_feature(&cpu->env, ARM_FEATURE_EL2)
2619             && cpu->gic_num_lrs) {
2620             int j;
2621 
2622             cs->maintenance_irq = cpu->gicv3_maintenance_interrupt;
2623 
2624             cs->num_list_regs = cpu->gic_num_lrs;
2625             cs->vpribits = cpu->gic_vpribits;
2626             cs->vprebits = cpu->gic_vprebits;
2627 
2628             /* Check against architectural constraints: getting these
2629              * wrong would be a bug in the CPU code defining these,
2630              * and the implementation relies on them holding.
2631              */
2632             g_assert(cs->vprebits <= cs->vpribits);
2633             g_assert(cs->vprebits >= 5 && cs->vprebits <= 7);
2634             g_assert(cs->vpribits >= 5 && cs->vpribits <= 8);
2635 
2636             define_arm_cp_regs(cpu, gicv3_cpuif_hcr_reginfo);
2637 
2638             for (j = 0; j < cs->num_list_regs; j++) {
2639                 /* Note that the AArch64 LRs are 64-bit; the AArch32 LRs
2640                  * are split into two cp15 regs, LR (the low part, with the
2641                  * same encoding as the AArch64 LR) and LRC (the high part).
2642                  */
2643                 ARMCPRegInfo lr_regset[] = {
2644                     { .name = "ICH_LRn_EL2", .state = ARM_CP_STATE_BOTH,
2645                       .opc0 = 3, .opc1 = 4, .crn = 12,
2646                       .crm = 12 + (j >> 3), .opc2 = j & 7,
2647                       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2648                       .access = PL2_RW,
2649                       .readfn = ich_lr_read,
2650                       .writefn = ich_lr_write,
2651                     },
2652                     { .name = "ICH_LRCn_EL2", .state = ARM_CP_STATE_AA32,
2653                       .cp = 15, .opc1 = 4, .crn = 12,
2654                       .crm = 14 + (j >> 3), .opc2 = j & 7,
2655                       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2656                       .access = PL2_RW,
2657                       .readfn = ich_lr_read,
2658                       .writefn = ich_lr_write,
2659                     },
2660                     REGINFO_SENTINEL
2661                 };
2662                 define_arm_cp_regs(cpu, lr_regset);
2663             }
2664             if (cs->vprebits >= 6) {
2665                 define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr1_reginfo);
2666             }
2667             if (cs->vprebits == 7) {
2668                 define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr23_reginfo);
2669             }
2670         }
2671         arm_register_el_change_hook(cpu, gicv3_cpuif_el_change_hook, cs);
2672     }
2673 }
2674