1 /* 2 * QEMU PPC PREP hardware System Emulator 3 * 4 * Copyright (c) 2003-2007 Jocelyn Mayer 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "hw/hw.h" 25 #include "hw/timer/m48t59.h" 26 #include "hw/i386/pc.h" 27 #include "hw/char/serial.h" 28 #include "hw/block/fdc.h" 29 #include "net/net.h" 30 #include "sysemu/sysemu.h" 31 #include "hw/isa/isa.h" 32 #include "hw/pci/pci.h" 33 #include "hw/pci/pci_host.h" 34 #include "hw/ppc/ppc.h" 35 #include "hw/boards.h" 36 #include "qemu/log.h" 37 #include "hw/ide.h" 38 #include "hw/loader.h" 39 #include "hw/timer/mc146818rtc.h" 40 #include "hw/isa/pc87312.h" 41 #include "sysemu/blockdev.h" 42 #include "sysemu/arch_init.h" 43 #include "sysemu/qtest.h" 44 #include "exec/address-spaces.h" 45 #include "elf.h" 46 47 //#define HARD_DEBUG_PPC_IO 48 //#define DEBUG_PPC_IO 49 50 /* SMP is not enabled, for now */ 51 #define MAX_CPUS 1 52 53 #define MAX_IDE_BUS 2 54 55 #define BIOS_SIZE (1024 * 1024) 56 #define BIOS_FILENAME "ppc_rom.bin" 57 #define KERNEL_LOAD_ADDR 0x01000000 58 #define INITRD_LOAD_ADDR 0x01800000 59 60 #if defined (HARD_DEBUG_PPC_IO) && !defined (DEBUG_PPC_IO) 61 #define DEBUG_PPC_IO 62 #endif 63 64 #if defined (HARD_DEBUG_PPC_IO) 65 #define PPC_IO_DPRINTF(fmt, ...) \ 66 do { \ 67 if (qemu_loglevel_mask(CPU_LOG_IOPORT)) { \ 68 qemu_log("%s: " fmt, __func__ , ## __VA_ARGS__); \ 69 } else { \ 70 printf("%s : " fmt, __func__ , ## __VA_ARGS__); \ 71 } \ 72 } while (0) 73 #elif defined (DEBUG_PPC_IO) 74 #define PPC_IO_DPRINTF(fmt, ...) \ 75 qemu_log_mask(CPU_LOG_IOPORT, fmt, ## __VA_ARGS__) 76 #else 77 #define PPC_IO_DPRINTF(fmt, ...) do { } while (0) 78 #endif 79 80 /* Constants for devices init */ 81 static const int ide_iobase[2] = { 0x1f0, 0x170 }; 82 static const int ide_iobase2[2] = { 0x3f6, 0x376 }; 83 static const int ide_irq[2] = { 13, 13 }; 84 85 #define NE2000_NB_MAX 6 86 87 static uint32_t ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 }; 88 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; 89 90 /* ISA IO ports bridge */ 91 #define PPC_IO_BASE 0x80000000 92 93 /* PowerPC control and status registers */ 94 #if 0 // Not used 95 static struct { 96 /* IDs */ 97 uint32_t veni_devi; 98 uint32_t revi; 99 /* Control and status */ 100 uint32_t gcsr; 101 uint32_t xcfr; 102 uint32_t ct32; 103 uint32_t mcsr; 104 /* General purpose registers */ 105 uint32_t gprg[6]; 106 /* Exceptions */ 107 uint32_t feen; 108 uint32_t fest; 109 uint32_t fema; 110 uint32_t fecl; 111 uint32_t eeen; 112 uint32_t eest; 113 uint32_t eecl; 114 uint32_t eeint; 115 uint32_t eemck0; 116 uint32_t eemck1; 117 /* Error diagnostic */ 118 } XCSR; 119 120 static void PPC_XCSR_writeb (void *opaque, 121 hwaddr addr, uint32_t value) 122 { 123 printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, 124 value); 125 } 126 127 static void PPC_XCSR_writew (void *opaque, 128 hwaddr addr, uint32_t value) 129 { 130 printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, 131 value); 132 } 133 134 static void PPC_XCSR_writel (void *opaque, 135 hwaddr addr, uint32_t value) 136 { 137 printf("%s: 0x" TARGET_FMT_plx " => 0x%08" PRIx32 "\n", __func__, addr, 138 value); 139 } 140 141 static uint32_t PPC_XCSR_readb (void *opaque, hwaddr addr) 142 { 143 uint32_t retval = 0; 144 145 printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, 146 retval); 147 148 return retval; 149 } 150 151 static uint32_t PPC_XCSR_readw (void *opaque, hwaddr addr) 152 { 153 uint32_t retval = 0; 154 155 printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, 156 retval); 157 158 return retval; 159 } 160 161 static uint32_t PPC_XCSR_readl (void *opaque, hwaddr addr) 162 { 163 uint32_t retval = 0; 164 165 printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr, 166 retval); 167 168 return retval; 169 } 170 171 static const MemoryRegionOps PPC_XCSR_ops = { 172 .old_mmio = { 173 .read = { PPC_XCSR_readb, PPC_XCSR_readw, PPC_XCSR_readl, }, 174 .write = { PPC_XCSR_writeb, PPC_XCSR_writew, PPC_XCSR_writel, }, 175 }, 176 .endianness = DEVICE_LITTLE_ENDIAN, 177 }; 178 179 #endif 180 181 /* Fake super-io ports for PREP platform (Intel 82378ZB) */ 182 typedef struct sysctrl_t { 183 qemu_irq reset_irq; 184 M48t59State *nvram; 185 uint8_t state; 186 uint8_t syscontrol; 187 int contiguous_map; 188 qemu_irq contiguous_map_irq; 189 int endian; 190 } sysctrl_t; 191 192 enum { 193 STATE_HARDFILE = 0x01, 194 }; 195 196 static sysctrl_t *sysctrl; 197 198 static void PREP_io_800_writeb (void *opaque, uint32_t addr, uint32_t val) 199 { 200 sysctrl_t *sysctrl = opaque; 201 202 PPC_IO_DPRINTF("0x%08" PRIx32 " => 0x%02" PRIx32 "\n", 203 addr - PPC_IO_BASE, val); 204 switch (addr) { 205 case 0x0092: 206 /* Special port 92 */ 207 /* Check soft reset asked */ 208 if (val & 0x01) { 209 qemu_irq_raise(sysctrl->reset_irq); 210 } else { 211 qemu_irq_lower(sysctrl->reset_irq); 212 } 213 /* Check LE mode */ 214 if (val & 0x02) { 215 sysctrl->endian = 1; 216 } else { 217 sysctrl->endian = 0; 218 } 219 break; 220 case 0x0800: 221 /* Motorola CPU configuration register : read-only */ 222 break; 223 case 0x0802: 224 /* Motorola base module feature register : read-only */ 225 break; 226 case 0x0803: 227 /* Motorola base module status register : read-only */ 228 break; 229 case 0x0808: 230 /* Hardfile light register */ 231 if (val & 1) 232 sysctrl->state |= STATE_HARDFILE; 233 else 234 sysctrl->state &= ~STATE_HARDFILE; 235 break; 236 case 0x0810: 237 /* Password protect 1 register */ 238 if (sysctrl->nvram != NULL) 239 m48t59_toggle_lock(sysctrl->nvram, 1); 240 break; 241 case 0x0812: 242 /* Password protect 2 register */ 243 if (sysctrl->nvram != NULL) 244 m48t59_toggle_lock(sysctrl->nvram, 2); 245 break; 246 case 0x0814: 247 /* L2 invalidate register */ 248 // tlb_flush(first_cpu, 1); 249 break; 250 case 0x081C: 251 /* system control register */ 252 sysctrl->syscontrol = val & 0x0F; 253 break; 254 case 0x0850: 255 /* I/O map type register */ 256 sysctrl->contiguous_map = val & 0x01; 257 qemu_set_irq(sysctrl->contiguous_map_irq, sysctrl->contiguous_map); 258 break; 259 default: 260 printf("ERROR: unaffected IO port write: %04" PRIx32 261 " => %02" PRIx32"\n", addr, val); 262 break; 263 } 264 } 265 266 static uint32_t PREP_io_800_readb (void *opaque, uint32_t addr) 267 { 268 sysctrl_t *sysctrl = opaque; 269 uint32_t retval = 0xFF; 270 271 switch (addr) { 272 case 0x0092: 273 /* Special port 92 */ 274 retval = sysctrl->endian << 1; 275 break; 276 case 0x0800: 277 /* Motorola CPU configuration register */ 278 retval = 0xEF; /* MPC750 */ 279 break; 280 case 0x0802: 281 /* Motorola Base module feature register */ 282 retval = 0xAD; /* No ESCC, PMC slot neither ethernet */ 283 break; 284 case 0x0803: 285 /* Motorola base module status register */ 286 retval = 0xE0; /* Standard MPC750 */ 287 break; 288 case 0x080C: 289 /* Equipment present register: 290 * no L2 cache 291 * no upgrade processor 292 * no cards in PCI slots 293 * SCSI fuse is bad 294 */ 295 retval = 0x3C; 296 break; 297 case 0x0810: 298 /* Motorola base module extended feature register */ 299 retval = 0x39; /* No USB, CF and PCI bridge. NVRAM present */ 300 break; 301 case 0x0814: 302 /* L2 invalidate: don't care */ 303 break; 304 case 0x0818: 305 /* Keylock */ 306 retval = 0x00; 307 break; 308 case 0x081C: 309 /* system control register 310 * 7 - 6 / 1 - 0: L2 cache enable 311 */ 312 retval = sysctrl->syscontrol; 313 break; 314 case 0x0823: 315 /* */ 316 retval = 0x03; /* no L2 cache */ 317 break; 318 case 0x0850: 319 /* I/O map type register */ 320 retval = sysctrl->contiguous_map; 321 break; 322 default: 323 printf("ERROR: unaffected IO port: %04" PRIx32 " read\n", addr); 324 break; 325 } 326 PPC_IO_DPRINTF("0x%08" PRIx32 " <= 0x%02" PRIx32 "\n", 327 addr - PPC_IO_BASE, retval); 328 329 return retval; 330 } 331 332 333 #define NVRAM_SIZE 0x2000 334 335 static void cpu_request_exit(void *opaque, int irq, int level) 336 { 337 CPUState *cpu = current_cpu; 338 339 if (cpu && level) { 340 cpu_exit(cpu); 341 } 342 } 343 344 static void ppc_prep_reset(void *opaque) 345 { 346 PowerPCCPU *cpu = opaque; 347 348 cpu_reset(CPU(cpu)); 349 350 /* Reset address */ 351 cpu->env.nip = 0xfffffffc; 352 } 353 354 static const MemoryRegionPortio prep_portio_list[] = { 355 /* System control ports */ 356 { 0x0092, 1, 1, .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, 357 { 0x0800, 0x52, 1, 358 .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, 359 /* Special port to get debug messages from Open-Firmware */ 360 { 0x0F00, 4, 1, .write = PPC_debug_write, }, 361 PORTIO_END_OF_LIST(), 362 }; 363 364 static PortioList prep_port_list; 365 366 /* PowerPC PREP hardware initialisation */ 367 static void ppc_prep_init(MachineState *machine) 368 { 369 ram_addr_t ram_size = machine->ram_size; 370 const char *cpu_model = machine->cpu_model; 371 const char *kernel_filename = machine->kernel_filename; 372 const char *kernel_cmdline = machine->kernel_cmdline; 373 const char *initrd_filename = machine->initrd_filename; 374 const char *boot_device = machine->boot_order; 375 MemoryRegion *sysmem = get_system_memory(); 376 PowerPCCPU *cpu = NULL; 377 CPUPPCState *env = NULL; 378 nvram_t nvram; 379 M48t59State *m48t59; 380 #if 0 381 MemoryRegion *xcsr = g_new(MemoryRegion, 1); 382 #endif 383 int linux_boot, i, nb_nics1; 384 MemoryRegion *ram = g_new(MemoryRegion, 1); 385 MemoryRegion *vga = g_new(MemoryRegion, 1); 386 uint32_t kernel_base, initrd_base; 387 long kernel_size, initrd_size; 388 DeviceState *dev; 389 PCIHostState *pcihost; 390 PCIBus *pci_bus; 391 PCIDevice *pci; 392 ISABus *isa_bus; 393 ISADevice *isa; 394 qemu_irq *cpu_exit_irq; 395 int ppc_boot_device; 396 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; 397 398 sysctrl = g_malloc0(sizeof(sysctrl_t)); 399 400 linux_boot = (kernel_filename != NULL); 401 402 /* init CPUs */ 403 if (cpu_model == NULL) 404 cpu_model = "602"; 405 for (i = 0; i < smp_cpus; i++) { 406 cpu = cpu_ppc_init(cpu_model); 407 if (cpu == NULL) { 408 fprintf(stderr, "Unable to find PowerPC CPU definition\n"); 409 exit(1); 410 } 411 env = &cpu->env; 412 413 if (env->flags & POWERPC_FLAG_RTC_CLK) { 414 /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */ 415 cpu_ppc_tb_init(env, 7812500UL); 416 } else { 417 /* Set time-base frequency to 100 Mhz */ 418 cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL); 419 } 420 qemu_register_reset(ppc_prep_reset, cpu); 421 } 422 423 /* allocate RAM */ 424 memory_region_init_ram(ram, NULL, "ppc_prep.ram", ram_size); 425 vmstate_register_ram_global(ram); 426 memory_region_add_subregion(sysmem, 0, ram); 427 428 if (linux_boot) { 429 kernel_base = KERNEL_LOAD_ADDR; 430 /* now we can load the kernel */ 431 kernel_size = load_image_targphys(kernel_filename, kernel_base, 432 ram_size - kernel_base); 433 if (kernel_size < 0) { 434 hw_error("qemu: could not load kernel '%s'\n", kernel_filename); 435 exit(1); 436 } 437 /* load initrd */ 438 if (initrd_filename) { 439 initrd_base = INITRD_LOAD_ADDR; 440 initrd_size = load_image_targphys(initrd_filename, initrd_base, 441 ram_size - initrd_base); 442 if (initrd_size < 0) { 443 hw_error("qemu: could not load initial ram disk '%s'\n", 444 initrd_filename); 445 } 446 } else { 447 initrd_base = 0; 448 initrd_size = 0; 449 } 450 ppc_boot_device = 'm'; 451 } else { 452 kernel_base = 0; 453 kernel_size = 0; 454 initrd_base = 0; 455 initrd_size = 0; 456 ppc_boot_device = '\0'; 457 /* For now, OHW cannot boot from the network. */ 458 for (i = 0; boot_device[i] != '\0'; i++) { 459 if (boot_device[i] >= 'a' && boot_device[i] <= 'f') { 460 ppc_boot_device = boot_device[i]; 461 break; 462 } 463 } 464 if (ppc_boot_device == '\0') { 465 fprintf(stderr, "No valid boot device for Mac99 machine\n"); 466 exit(1); 467 } 468 } 469 470 if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) { 471 hw_error("Only 6xx bus is supported on PREP machine\n"); 472 } 473 474 dev = qdev_create(NULL, "raven-pcihost"); 475 if (bios_name == NULL) { 476 bios_name = BIOS_FILENAME; 477 } 478 qdev_prop_set_string(dev, "bios-name", bios_name); 479 qdev_prop_set_uint32(dev, "elf-machine", ELF_MACHINE); 480 pcihost = PCI_HOST_BRIDGE(dev); 481 object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL); 482 qdev_init_nofail(dev); 483 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); 484 if (pci_bus == NULL) { 485 fprintf(stderr, "Couldn't create PCI host controller.\n"); 486 exit(1); 487 } 488 sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0); 489 490 /* PCI -> ISA bridge */ 491 pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378"); 492 cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1); 493 cpu = POWERPC_CPU(first_cpu); 494 qdev_connect_gpio_out(&pci->qdev, 0, 495 cpu->env.irq_inputs[PPC6xx_INPUT_INT]); 496 qdev_connect_gpio_out(&pci->qdev, 1, *cpu_exit_irq); 497 sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9)); 498 sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11)); 499 sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9)); 500 sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11)); 501 isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci), "isa.0")); 502 503 /* Super I/O (parallel + serial ports) */ 504 isa = isa_create(isa_bus, TYPE_PC87312); 505 dev = DEVICE(isa); 506 qdev_prop_set_uint8(dev, "config", 13); /* fdc, ser0, ser1, par0 */ 507 qdev_init_nofail(dev); 508 509 /* init basic PC hardware */ 510 pci_vga_init(pci_bus); 511 /* Open Hack'Ware hack: PCI BAR#0 is programmed to 0xf0000000. 512 * While bios will access framebuffer at 0xf0000000, real physical 513 * address is 0xf0000000 + 0xc0000000 (PCI memory base). 514 * Alias the wrong memory accesses to the right place. 515 */ 516 memory_region_init_alias(vga, NULL, "vga-alias", pci_address_space(pci), 517 0xf0000000, 0x1000000); 518 memory_region_add_subregion_overlap(sysmem, 0xf0000000, vga, 10); 519 520 nb_nics1 = nb_nics; 521 if (nb_nics1 > NE2000_NB_MAX) 522 nb_nics1 = NE2000_NB_MAX; 523 for(i = 0; i < nb_nics1; i++) { 524 if (nd_table[i].model == NULL) { 525 nd_table[i].model = g_strdup("ne2k_isa"); 526 } 527 if (strcmp(nd_table[i].model, "ne2k_isa") == 0) { 528 isa_ne2000_init(isa_bus, ne2000_io[i], ne2000_irq[i], 529 &nd_table[i]); 530 } else { 531 pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL); 532 } 533 } 534 535 ide_drive_get(hd, MAX_IDE_BUS); 536 for(i = 0; i < MAX_IDE_BUS; i++) { 537 isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i], 538 hd[2 * i], 539 hd[2 * i + 1]); 540 } 541 isa_create_simple(isa_bus, "i8042"); 542 543 cpu = POWERPC_CPU(first_cpu); 544 sysctrl->reset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET]; 545 546 portio_list_init(&prep_port_list, NULL, prep_portio_list, sysctrl, "prep"); 547 portio_list_add(&prep_port_list, isa_address_space_io(isa), 0x0); 548 549 /* PowerPC control and status register group */ 550 #if 0 551 memory_region_init_io(xcsr, NULL, &PPC_XCSR_ops, NULL, "ppc-xcsr", 0x1000); 552 memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr); 553 #endif 554 555 if (usb_enabled(false)) { 556 pci_create_simple(pci_bus, -1, "pci-ohci"); 557 } 558 559 m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59); 560 if (m48t59 == NULL) 561 return; 562 sysctrl->nvram = m48t59; 563 564 /* Initialise NVRAM */ 565 nvram.opaque = m48t59; 566 nvram.read_fn = &m48t59_read; 567 nvram.write_fn = &m48t59_write; 568 PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "PREP", ram_size, ppc_boot_device, 569 kernel_base, kernel_size, 570 kernel_cmdline, 571 initrd_base, initrd_size, 572 /* XXX: need an option to load a NVRAM image */ 573 0, 574 graphic_width, graphic_height, graphic_depth); 575 } 576 577 static QEMUMachine prep_machine = { 578 .name = "prep", 579 .desc = "PowerPC PREP platform", 580 .init = ppc_prep_init, 581 .max_cpus = MAX_CPUS, 582 .default_boot_order = "cad", 583 }; 584 585 static void prep_machine_init(void) 586 { 587 qemu_register_machine(&prep_machine); 588 } 589 590 machine_init(prep_machine_init); 591