1 /* 2 * Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GPLv2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "hw/hw.h" 15 #include "hw/sysbus.h" 16 #include "hw/arm/pxa.h" 17 #include "hw/sd/sd.h" 18 #include "hw/qdev.h" 19 #include "hw/qdev-properties.h" 20 #include "qemu/error-report.h" 21 22 #define TYPE_PXA2XX_MMCI "pxa2xx-mmci" 23 #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI) 24 25 #define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus" 26 #define PXA2XX_MMCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_PXA2XX_MMCI_BUS) 27 28 struct PXA2xxMMCIState { 29 SysBusDevice parent_obj; 30 31 MemoryRegion iomem; 32 qemu_irq irq; 33 qemu_irq rx_dma; 34 qemu_irq tx_dma; 35 qemu_irq inserted; 36 qemu_irq readonly; 37 38 BlockBackend *blk; 39 SDBus sdbus; 40 41 uint32_t status; 42 uint32_t clkrt; 43 uint32_t spi; 44 uint32_t cmdat; 45 uint32_t resp_tout; 46 uint32_t read_tout; 47 int32_t blklen; 48 int32_t numblk; 49 uint32_t intmask; 50 uint32_t intreq; 51 int32_t cmd; 52 uint32_t arg; 53 54 int32_t active; 55 int32_t bytesleft; 56 uint8_t tx_fifo[64]; 57 uint32_t tx_start; 58 uint32_t tx_len; 59 uint8_t rx_fifo[32]; 60 uint32_t rx_start; 61 uint32_t rx_len; 62 uint16_t resp_fifo[9]; 63 uint32_t resp_len; 64 65 int32_t cmdreq; 66 }; 67 68 static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id) 69 { 70 PXA2xxMMCIState *s = opaque; 71 72 return s->tx_start < ARRAY_SIZE(s->tx_fifo) 73 && s->rx_start < ARRAY_SIZE(s->rx_fifo) 74 && s->tx_len <= ARRAY_SIZE(s->tx_fifo) 75 && s->rx_len <= ARRAY_SIZE(s->rx_fifo) 76 && s->resp_len <= ARRAY_SIZE(s->resp_fifo); 77 } 78 79 80 static const VMStateDescription vmstate_pxa2xx_mmci = { 81 .name = "pxa2xx-mmci", 82 .version_id = 2, 83 .minimum_version_id = 2, 84 .fields = (VMStateField[]) { 85 VMSTATE_UINT32(status, PXA2xxMMCIState), 86 VMSTATE_UINT32(clkrt, PXA2xxMMCIState), 87 VMSTATE_UINT32(spi, PXA2xxMMCIState), 88 VMSTATE_UINT32(cmdat, PXA2xxMMCIState), 89 VMSTATE_UINT32(resp_tout, PXA2xxMMCIState), 90 VMSTATE_UINT32(read_tout, PXA2xxMMCIState), 91 VMSTATE_INT32(blklen, PXA2xxMMCIState), 92 VMSTATE_INT32(numblk, PXA2xxMMCIState), 93 VMSTATE_UINT32(intmask, PXA2xxMMCIState), 94 VMSTATE_UINT32(intreq, PXA2xxMMCIState), 95 VMSTATE_INT32(cmd, PXA2xxMMCIState), 96 VMSTATE_UINT32(arg, PXA2xxMMCIState), 97 VMSTATE_INT32(cmdreq, PXA2xxMMCIState), 98 VMSTATE_INT32(active, PXA2xxMMCIState), 99 VMSTATE_INT32(bytesleft, PXA2xxMMCIState), 100 VMSTATE_UINT32(tx_start, PXA2xxMMCIState), 101 VMSTATE_UINT32(tx_len, PXA2xxMMCIState), 102 VMSTATE_UINT32(rx_start, PXA2xxMMCIState), 103 VMSTATE_UINT32(rx_len, PXA2xxMMCIState), 104 VMSTATE_UINT32(resp_len, PXA2xxMMCIState), 105 VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate), 106 VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64), 107 VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32), 108 VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9), 109 VMSTATE_END_OF_LIST() 110 } 111 }; 112 113 #define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */ 114 #define MMC_STAT 0x04 /* MMC Status register */ 115 #define MMC_CLKRT 0x08 /* MMC Clock Rate register */ 116 #define MMC_SPI 0x0c /* MMC SPI Mode register */ 117 #define MMC_CMDAT 0x10 /* MMC Command/Data register */ 118 #define MMC_RESTO 0x14 /* MMC Response Time-Out register */ 119 #define MMC_RDTO 0x18 /* MMC Read Time-Out register */ 120 #define MMC_BLKLEN 0x1c /* MMC Block Length register */ 121 #define MMC_NUMBLK 0x20 /* MMC Number of Blocks register */ 122 #define MMC_PRTBUF 0x24 /* MMC Buffer Partly Full register */ 123 #define MMC_I_MASK 0x28 /* MMC Interrupt Mask register */ 124 #define MMC_I_REG 0x2c /* MMC Interrupt Request register */ 125 #define MMC_CMD 0x30 /* MMC Command register */ 126 #define MMC_ARGH 0x34 /* MMC Argument High register */ 127 #define MMC_ARGL 0x38 /* MMC Argument Low register */ 128 #define MMC_RES 0x3c /* MMC Response FIFO */ 129 #define MMC_RXFIFO 0x40 /* MMC Receive FIFO */ 130 #define MMC_TXFIFO 0x44 /* MMC Transmit FIFO */ 131 #define MMC_RDWAIT 0x48 /* MMC RD_WAIT register */ 132 #define MMC_BLKS_REM 0x4c /* MMC Blocks Remaining register */ 133 134 /* Bitfield masks */ 135 #define STRPCL_STOP_CLK (1 << 0) 136 #define STRPCL_STRT_CLK (1 << 1) 137 #define STAT_TOUT_RES (1 << 1) 138 #define STAT_CLK_EN (1 << 8) 139 #define STAT_DATA_DONE (1 << 11) 140 #define STAT_PRG_DONE (1 << 12) 141 #define STAT_END_CMDRES (1 << 13) 142 #define SPI_SPI_MODE (1 << 0) 143 #define CMDAT_RES_TYPE (3 << 0) 144 #define CMDAT_DATA_EN (1 << 2) 145 #define CMDAT_WR_RD (1 << 3) 146 #define CMDAT_DMA_EN (1 << 7) 147 #define CMDAT_STOP_TRAN (1 << 10) 148 #define INT_DATA_DONE (1 << 0) 149 #define INT_PRG_DONE (1 << 1) 150 #define INT_END_CMD (1 << 2) 151 #define INT_STOP_CMD (1 << 3) 152 #define INT_CLK_OFF (1 << 4) 153 #define INT_RXFIFO_REQ (1 << 5) 154 #define INT_TXFIFO_REQ (1 << 6) 155 #define INT_TINT (1 << 7) 156 #define INT_DAT_ERR (1 << 8) 157 #define INT_RES_ERR (1 << 9) 158 #define INT_RD_STALLED (1 << 10) 159 #define INT_SDIO_INT (1 << 11) 160 #define INT_SDIO_SACK (1 << 12) 161 #define PRTBUF_PRT_BUF (1 << 0) 162 163 /* Route internal interrupt lines to the global IC and DMA */ 164 static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s) 165 { 166 uint32_t mask = s->intmask; 167 if (s->cmdat & CMDAT_DMA_EN) { 168 mask |= INT_RXFIFO_REQ | INT_TXFIFO_REQ; 169 170 qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ)); 171 qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ)); 172 } 173 174 qemu_set_irq(s->irq, !!(s->intreq & ~mask)); 175 } 176 177 static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s) 178 { 179 if (!s->active) 180 return; 181 182 if (s->cmdat & CMDAT_WR_RD) { 183 while (s->bytesleft && s->tx_len) { 184 sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]); 185 s->tx_start &= 0x1f; 186 s->tx_len --; 187 s->bytesleft --; 188 } 189 if (s->bytesleft) 190 s->intreq |= INT_TXFIFO_REQ; 191 } else 192 while (s->bytesleft && s->rx_len < 32) { 193 s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] = 194 sdbus_read_data(&s->sdbus); 195 s->bytesleft --; 196 s->intreq |= INT_RXFIFO_REQ; 197 } 198 199 if (!s->bytesleft) { 200 s->active = 0; 201 s->intreq |= INT_DATA_DONE; 202 s->status |= STAT_DATA_DONE; 203 204 if (s->cmdat & CMDAT_WR_RD) { 205 s->intreq |= INT_PRG_DONE; 206 s->status |= STAT_PRG_DONE; 207 } 208 } 209 210 pxa2xx_mmci_int_update(s); 211 } 212 213 static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s) 214 { 215 int rsplen, i; 216 SDRequest request; 217 uint8_t response[16]; 218 219 s->active = 1; 220 s->rx_len = 0; 221 s->tx_len = 0; 222 s->cmdreq = 0; 223 224 request.cmd = s->cmd; 225 request.arg = s->arg; 226 request.crc = 0; /* FIXME */ 227 228 rsplen = sdbus_do_command(&s->sdbus, &request, response); 229 s->intreq |= INT_END_CMD; 230 231 memset(s->resp_fifo, 0, sizeof(s->resp_fifo)); 232 switch (s->cmdat & CMDAT_RES_TYPE) { 233 #define PXAMMCI_RESP(wd, value0, value1) \ 234 s->resp_fifo[(wd) + 0] |= (value0); \ 235 s->resp_fifo[(wd) + 1] |= (value1) << 8; 236 case 0: /* No response */ 237 goto complete; 238 239 case 1: /* R1, R4, R5 or R6 */ 240 if (rsplen < 4) 241 goto timeout; 242 goto complete; 243 244 case 2: /* R2 */ 245 if (rsplen < 16) 246 goto timeout; 247 goto complete; 248 249 case 3: /* R3 */ 250 if (rsplen < 4) 251 goto timeout; 252 goto complete; 253 254 complete: 255 for (i = 0; rsplen > 0; i ++, rsplen -= 2) { 256 PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]); 257 } 258 s->status |= STAT_END_CMDRES; 259 260 if (!(s->cmdat & CMDAT_DATA_EN)) 261 s->active = 0; 262 else 263 s->bytesleft = s->numblk * s->blklen; 264 265 s->resp_len = 0; 266 break; 267 268 timeout: 269 s->active = 0; 270 s->status |= STAT_TOUT_RES; 271 break; 272 } 273 274 pxa2xx_mmci_fifo_update(s); 275 } 276 277 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size) 278 { 279 PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque; 280 uint32_t ret; 281 282 switch (offset) { 283 case MMC_STRPCL: 284 return 0; 285 case MMC_STAT: 286 return s->status; 287 case MMC_CLKRT: 288 return s->clkrt; 289 case MMC_SPI: 290 return s->spi; 291 case MMC_CMDAT: 292 return s->cmdat; 293 case MMC_RESTO: 294 return s->resp_tout; 295 case MMC_RDTO: 296 return s->read_tout; 297 case MMC_BLKLEN: 298 return s->blklen; 299 case MMC_NUMBLK: 300 return s->numblk; 301 case MMC_PRTBUF: 302 return 0; 303 case MMC_I_MASK: 304 return s->intmask; 305 case MMC_I_REG: 306 return s->intreq; 307 case MMC_CMD: 308 return s->cmd | 0x40; 309 case MMC_ARGH: 310 return s->arg >> 16; 311 case MMC_ARGL: 312 return s->arg & 0xffff; 313 case MMC_RES: 314 if (s->resp_len < 9) 315 return s->resp_fifo[s->resp_len ++]; 316 return 0; 317 case MMC_RXFIFO: 318 ret = 0; 319 while (size-- && s->rx_len) { 320 ret |= s->rx_fifo[s->rx_start++] << (size << 3); 321 s->rx_start &= 0x1f; 322 s->rx_len --; 323 } 324 s->intreq &= ~INT_RXFIFO_REQ; 325 pxa2xx_mmci_fifo_update(s); 326 return ret; 327 case MMC_RDWAIT: 328 return 0; 329 case MMC_BLKS_REM: 330 return s->numblk; 331 default: 332 hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset); 333 } 334 335 return 0; 336 } 337 338 static void pxa2xx_mmci_write(void *opaque, 339 hwaddr offset, uint64_t value, unsigned size) 340 { 341 PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque; 342 343 switch (offset) { 344 case MMC_STRPCL: 345 if (value & STRPCL_STRT_CLK) { 346 s->status |= STAT_CLK_EN; 347 s->intreq &= ~INT_CLK_OFF; 348 349 if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) { 350 s->status &= STAT_CLK_EN; 351 pxa2xx_mmci_wakequeues(s); 352 } 353 } 354 355 if (value & STRPCL_STOP_CLK) { 356 s->status &= ~STAT_CLK_EN; 357 s->intreq |= INT_CLK_OFF; 358 s->active = 0; 359 } 360 361 pxa2xx_mmci_int_update(s); 362 break; 363 364 case MMC_CLKRT: 365 s->clkrt = value & 7; 366 break; 367 368 case MMC_SPI: 369 s->spi = value & 0xf; 370 if (value & SPI_SPI_MODE) 371 printf("%s: attempted to use card in SPI mode\n", __FUNCTION__); 372 break; 373 374 case MMC_CMDAT: 375 s->cmdat = value & 0x3dff; 376 s->active = 0; 377 s->cmdreq = 1; 378 if (!(value & CMDAT_STOP_TRAN)) { 379 s->status &= STAT_CLK_EN; 380 381 if (s->status & STAT_CLK_EN) 382 pxa2xx_mmci_wakequeues(s); 383 } 384 385 pxa2xx_mmci_int_update(s); 386 break; 387 388 case MMC_RESTO: 389 s->resp_tout = value & 0x7f; 390 break; 391 392 case MMC_RDTO: 393 s->read_tout = value & 0xffff; 394 break; 395 396 case MMC_BLKLEN: 397 s->blklen = value & 0xfff; 398 break; 399 400 case MMC_NUMBLK: 401 s->numblk = value & 0xffff; 402 break; 403 404 case MMC_PRTBUF: 405 if (value & PRTBUF_PRT_BUF) { 406 s->tx_start ^= 32; 407 s->tx_len = 0; 408 } 409 pxa2xx_mmci_fifo_update(s); 410 break; 411 412 case MMC_I_MASK: 413 s->intmask = value & 0x1fff; 414 pxa2xx_mmci_int_update(s); 415 break; 416 417 case MMC_CMD: 418 s->cmd = value & 0x3f; 419 break; 420 421 case MMC_ARGH: 422 s->arg &= 0x0000ffff; 423 s->arg |= value << 16; 424 break; 425 426 case MMC_ARGL: 427 s->arg &= 0xffff0000; 428 s->arg |= value & 0x0000ffff; 429 break; 430 431 case MMC_TXFIFO: 432 while (size-- && s->tx_len < 0x20) 433 s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] = 434 (value >> (size << 3)) & 0xff; 435 s->intreq &= ~INT_TXFIFO_REQ; 436 pxa2xx_mmci_fifo_update(s); 437 break; 438 439 case MMC_RDWAIT: 440 case MMC_BLKS_REM: 441 break; 442 443 default: 444 hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset); 445 } 446 } 447 448 static const MemoryRegionOps pxa2xx_mmci_ops = { 449 .read = pxa2xx_mmci_read, 450 .write = pxa2xx_mmci_write, 451 .endianness = DEVICE_NATIVE_ENDIAN, 452 }; 453 454 PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem, 455 hwaddr base, 456 BlockBackend *blk, qemu_irq irq, 457 qemu_irq rx_dma, qemu_irq tx_dma) 458 { 459 DeviceState *dev, *carddev; 460 SysBusDevice *sbd; 461 PXA2xxMMCIState *s; 462 Error *err = NULL; 463 464 dev = qdev_create(NULL, TYPE_PXA2XX_MMCI); 465 s = PXA2XX_MMCI(dev); 466 sbd = SYS_BUS_DEVICE(dev); 467 sysbus_mmio_map(sbd, 0, base); 468 sysbus_connect_irq(sbd, 0, irq); 469 qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma); 470 qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma); 471 472 /* Create and plug in the sd card */ 473 carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD); 474 qdev_prop_set_drive(carddev, "drive", blk, &err); 475 if (err) { 476 error_report("failed to init SD card: %s", error_get_pretty(err)); 477 return NULL; 478 } 479 object_property_set_bool(OBJECT(carddev), true, "realized", &err); 480 if (err) { 481 error_report("failed to init SD card: %s", error_get_pretty(err)); 482 return NULL; 483 } 484 485 return s; 486 } 487 488 static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted) 489 { 490 PXA2xxMMCIState *s = PXA2XX_MMCI(dev); 491 492 qemu_set_irq(s->inserted, inserted); 493 } 494 495 static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly) 496 { 497 PXA2xxMMCIState *s = PXA2XX_MMCI(dev); 498 499 qemu_set_irq(s->readonly, readonly); 500 } 501 502 void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly, 503 qemu_irq coverswitch) 504 { 505 DeviceState *dev = DEVICE(s); 506 507 s->readonly = readonly; 508 s->inserted = coverswitch; 509 510 pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus)); 511 pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus)); 512 } 513 514 static void pxa2xx_mmci_reset(DeviceState *d) 515 { 516 PXA2xxMMCIState *s = PXA2XX_MMCI(d); 517 518 s->status = 0; 519 s->clkrt = 0; 520 s->spi = 0; 521 s->cmdat = 0; 522 s->resp_tout = 0; 523 s->read_tout = 0; 524 s->blklen = 0; 525 s->numblk = 0; 526 s->intmask = 0; 527 s->intreq = 0; 528 s->cmd = 0; 529 s->arg = 0; 530 s->active = 0; 531 s->bytesleft = 0; 532 s->tx_start = 0; 533 s->tx_len = 0; 534 s->rx_start = 0; 535 s->rx_len = 0; 536 s->resp_len = 0; 537 s->cmdreq = 0; 538 memset(s->tx_fifo, 0, sizeof(s->tx_fifo)); 539 memset(s->rx_fifo, 0, sizeof(s->rx_fifo)); 540 memset(s->resp_fifo, 0, sizeof(s->resp_fifo)); 541 } 542 543 static void pxa2xx_mmci_instance_init(Object *obj) 544 { 545 PXA2xxMMCIState *s = PXA2XX_MMCI(obj); 546 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 547 DeviceState *dev = DEVICE(obj); 548 549 memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s, 550 "pxa2xx-mmci", 0x00100000); 551 sysbus_init_mmio(sbd, &s->iomem); 552 sysbus_init_irq(sbd, &s->irq); 553 qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1); 554 qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1); 555 556 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), 557 TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus"); 558 } 559 560 static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data) 561 { 562 DeviceClass *dc = DEVICE_CLASS(klass); 563 564 dc->vmsd = &vmstate_pxa2xx_mmci; 565 dc->reset = pxa2xx_mmci_reset; 566 } 567 568 static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data) 569 { 570 SDBusClass *sbc = SD_BUS_CLASS(klass); 571 572 sbc->set_inserted = pxa2xx_mmci_set_inserted; 573 sbc->set_readonly = pxa2xx_mmci_set_readonly; 574 } 575 576 static const TypeInfo pxa2xx_mmci_info = { 577 .name = TYPE_PXA2XX_MMCI, 578 .parent = TYPE_SYS_BUS_DEVICE, 579 .instance_size = sizeof(PXA2xxMMCIState), 580 .instance_init = pxa2xx_mmci_instance_init, 581 .class_init = pxa2xx_mmci_class_init, 582 }; 583 584 static const TypeInfo pxa2xx_mmci_bus_info = { 585 .name = TYPE_PXA2XX_MMCI_BUS, 586 .parent = TYPE_SD_BUS, 587 .instance_size = sizeof(SDBus), 588 .class_init = pxa2xx_mmci_bus_class_init, 589 }; 590 591 static void pxa2xx_mmci_register_types(void) 592 { 593 type_register_static(&pxa2xx_mmci_info); 594 type_register_static(&pxa2xx_mmci_bus_info); 595 } 596 597 type_init(pxa2xx_mmci_register_types) 598