xref: /qemu/hw/usb/hcd-ohci.c (revision b2a3cbb8)
1 /*
2  * QEMU USB OHCI Emulation
3  * Copyright (c) 2004 Gianni Tedesco
4  * Copyright (c) 2006 CodeSourcery
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * This library is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU Lesser General Public
9  * License as published by the Free Software Foundation; either
10  * version 2.1 of the License, or (at your option) any later version.
11  *
12  * This library is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * Lesser General Public License for more details.
16  *
17  * You should have received a copy of the GNU Lesser General Public
18  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
19  *
20  * TODO:
21  *  o Isochronous transfers
22  *  o Allocate bandwidth in frames properly
23  *  o Disable timers when nothing needs to be done, or remove timer usage
24  *    all together.
25  *  o BIOS work to boot from USB storage
26 */
27 
28 #include "qemu/osdep.h"
29 #include "hw/irq.h"
30 #include "qapi/error.h"
31 #include "qemu/module.h"
32 #include "qemu/timer.h"
33 #include "hw/usb.h"
34 #include "migration/vmstate.h"
35 #include "hw/sysbus.h"
36 #include "hw/qdev-dma.h"
37 #include "hw/qdev-properties.h"
38 #include "trace.h"
39 #include "hcd-ohci.h"
40 
41 /* This causes frames to occur 1000x slower */
42 //#define OHCI_TIME_WARP 1
43 
44 #define ED_LINK_LIMIT 32
45 
46 static int64_t usb_frame_time;
47 static int64_t usb_bit_time;
48 
49 /* Host Controller Communications Area */
50 struct ohci_hcca {
51     uint32_t intr[32];
52     uint16_t frame, pad;
53     uint32_t done;
54 };
55 #define HCCA_WRITEBACK_OFFSET   offsetof(struct ohci_hcca, frame)
56 #define HCCA_WRITEBACK_SIZE     8 /* frame, pad, done */
57 
58 #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head)
59 #define ED_WBACK_SIZE   4
60 
61 /* Bitfields for the first word of an Endpoint Desciptor.  */
62 #define OHCI_ED_FA_SHIFT  0
63 #define OHCI_ED_FA_MASK   (0x7f<<OHCI_ED_FA_SHIFT)
64 #define OHCI_ED_EN_SHIFT  7
65 #define OHCI_ED_EN_MASK   (0xf<<OHCI_ED_EN_SHIFT)
66 #define OHCI_ED_D_SHIFT   11
67 #define OHCI_ED_D_MASK    (3<<OHCI_ED_D_SHIFT)
68 #define OHCI_ED_S         (1<<13)
69 #define OHCI_ED_K         (1<<14)
70 #define OHCI_ED_F         (1<<15)
71 #define OHCI_ED_MPS_SHIFT 16
72 #define OHCI_ED_MPS_MASK  (0x7ff<<OHCI_ED_MPS_SHIFT)
73 
74 /* Flags in the head field of an Endpoint Desciptor.  */
75 #define OHCI_ED_H         1
76 #define OHCI_ED_C         2
77 
78 /* Bitfields for the first word of a Transfer Desciptor.  */
79 #define OHCI_TD_R         (1<<18)
80 #define OHCI_TD_DP_SHIFT  19
81 #define OHCI_TD_DP_MASK   (3<<OHCI_TD_DP_SHIFT)
82 #define OHCI_TD_DI_SHIFT  21
83 #define OHCI_TD_DI_MASK   (7<<OHCI_TD_DI_SHIFT)
84 #define OHCI_TD_T0        (1<<24)
85 #define OHCI_TD_T1        (1<<25)
86 #define OHCI_TD_EC_SHIFT  26
87 #define OHCI_TD_EC_MASK   (3<<OHCI_TD_EC_SHIFT)
88 #define OHCI_TD_CC_SHIFT  28
89 #define OHCI_TD_CC_MASK   (0xf<<OHCI_TD_CC_SHIFT)
90 
91 /* Bitfields for the first word of an Isochronous Transfer Desciptor.  */
92 /* CC & DI - same as in the General Transfer Desciptor */
93 #define OHCI_TD_SF_SHIFT  0
94 #define OHCI_TD_SF_MASK   (0xffff<<OHCI_TD_SF_SHIFT)
95 #define OHCI_TD_FC_SHIFT  24
96 #define OHCI_TD_FC_MASK   (7<<OHCI_TD_FC_SHIFT)
97 
98 /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */
99 #define OHCI_TD_PSW_CC_SHIFT 12
100 #define OHCI_TD_PSW_CC_MASK  (0xf<<OHCI_TD_PSW_CC_SHIFT)
101 #define OHCI_TD_PSW_SIZE_SHIFT 0
102 #define OHCI_TD_PSW_SIZE_MASK  (0xfff<<OHCI_TD_PSW_SIZE_SHIFT)
103 
104 #define OHCI_PAGE_MASK    0xfffff000
105 #define OHCI_OFFSET_MASK  0xfff
106 
107 #define OHCI_DPTR_MASK    0xfffffff0
108 
109 #define OHCI_BM(val, field) \
110   (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT)
111 
112 #define OHCI_SET_BM(val, field, newval) do { \
113     val &= ~OHCI_##field##_MASK; \
114     val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \
115     } while(0)
116 
117 /* endpoint descriptor */
118 struct ohci_ed {
119     uint32_t flags;
120     uint32_t tail;
121     uint32_t head;
122     uint32_t next;
123 };
124 
125 /* General transfer descriptor */
126 struct ohci_td {
127     uint32_t flags;
128     uint32_t cbp;
129     uint32_t next;
130     uint32_t be;
131 };
132 
133 /* Isochronous transfer descriptor */
134 struct ohci_iso_td {
135     uint32_t flags;
136     uint32_t bp;
137     uint32_t next;
138     uint32_t be;
139     uint16_t offset[8];
140 };
141 
142 #define USB_HZ                      12000000
143 
144 /* OHCI Local stuff */
145 #define OHCI_CTL_CBSR         ((1<<0)|(1<<1))
146 #define OHCI_CTL_PLE          (1<<2)
147 #define OHCI_CTL_IE           (1<<3)
148 #define OHCI_CTL_CLE          (1<<4)
149 #define OHCI_CTL_BLE          (1<<5)
150 #define OHCI_CTL_HCFS         ((1<<6)|(1<<7))
151 #define  OHCI_USB_RESET       0x00
152 #define  OHCI_USB_RESUME      0x40
153 #define  OHCI_USB_OPERATIONAL 0x80
154 #define  OHCI_USB_SUSPEND     0xc0
155 #define OHCI_CTL_IR           (1<<8)
156 #define OHCI_CTL_RWC          (1<<9)
157 #define OHCI_CTL_RWE          (1<<10)
158 
159 #define OHCI_STATUS_HCR       (1<<0)
160 #define OHCI_STATUS_CLF       (1<<1)
161 #define OHCI_STATUS_BLF       (1<<2)
162 #define OHCI_STATUS_OCR       (1<<3)
163 #define OHCI_STATUS_SOC       ((1<<6)|(1<<7))
164 
165 #define OHCI_INTR_SO          (1U<<0) /* Scheduling overrun */
166 #define OHCI_INTR_WD          (1U<<1) /* HcDoneHead writeback */
167 #define OHCI_INTR_SF          (1U<<2) /* Start of frame */
168 #define OHCI_INTR_RD          (1U<<3) /* Resume detect */
169 #define OHCI_INTR_UE          (1U<<4) /* Unrecoverable error */
170 #define OHCI_INTR_FNO         (1U<<5) /* Frame number overflow */
171 #define OHCI_INTR_RHSC        (1U<<6) /* Root hub status change */
172 #define OHCI_INTR_OC          (1U<<30) /* Ownership change */
173 #define OHCI_INTR_MIE         (1U<<31) /* Master Interrupt Enable */
174 
175 #define OHCI_HCCA_SIZE        0x100
176 #define OHCI_HCCA_MASK        0xffffff00
177 
178 #define OHCI_EDPTR_MASK       0xfffffff0
179 
180 #define OHCI_FMI_FI           0x00003fff
181 #define OHCI_FMI_FSMPS        0xffff0000
182 #define OHCI_FMI_FIT          0x80000000
183 
184 #define OHCI_FR_RT            (1U<<31)
185 
186 #define OHCI_LS_THRESH        0x628
187 
188 #define OHCI_RHA_RW_MASK      0x00000000 /* Mask of supported features.  */
189 #define OHCI_RHA_PSM          (1<<8)
190 #define OHCI_RHA_NPS          (1<<9)
191 #define OHCI_RHA_DT           (1<<10)
192 #define OHCI_RHA_OCPM         (1<<11)
193 #define OHCI_RHA_NOCP         (1<<12)
194 #define OHCI_RHA_POTPGT_MASK  0xff000000
195 
196 #define OHCI_RHS_LPS          (1U<<0)
197 #define OHCI_RHS_OCI          (1U<<1)
198 #define OHCI_RHS_DRWE         (1U<<15)
199 #define OHCI_RHS_LPSC         (1U<<16)
200 #define OHCI_RHS_OCIC         (1U<<17)
201 #define OHCI_RHS_CRWE         (1U<<31)
202 
203 #define OHCI_PORT_CCS         (1<<0)
204 #define OHCI_PORT_PES         (1<<1)
205 #define OHCI_PORT_PSS         (1<<2)
206 #define OHCI_PORT_POCI        (1<<3)
207 #define OHCI_PORT_PRS         (1<<4)
208 #define OHCI_PORT_PPS         (1<<8)
209 #define OHCI_PORT_LSDA        (1<<9)
210 #define OHCI_PORT_CSC         (1<<16)
211 #define OHCI_PORT_PESC        (1<<17)
212 #define OHCI_PORT_PSSC        (1<<18)
213 #define OHCI_PORT_OCIC        (1<<19)
214 #define OHCI_PORT_PRSC        (1<<20)
215 #define OHCI_PORT_WTC         (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \
216                                |OHCI_PORT_OCIC|OHCI_PORT_PRSC)
217 
218 #define OHCI_TD_DIR_SETUP     0x0
219 #define OHCI_TD_DIR_OUT       0x1
220 #define OHCI_TD_DIR_IN        0x2
221 #define OHCI_TD_DIR_RESERVED  0x3
222 
223 #define OHCI_CC_NOERROR             0x0
224 #define OHCI_CC_CRC                 0x1
225 #define OHCI_CC_BITSTUFFING         0x2
226 #define OHCI_CC_DATATOGGLEMISMATCH  0x3
227 #define OHCI_CC_STALL               0x4
228 #define OHCI_CC_DEVICENOTRESPONDING 0x5
229 #define OHCI_CC_PIDCHECKFAILURE     0x6
230 #define OHCI_CC_UNDEXPETEDPID       0x7
231 #define OHCI_CC_DATAOVERRUN         0x8
232 #define OHCI_CC_DATAUNDERRUN        0x9
233 #define OHCI_CC_BUFFEROVERRUN       0xc
234 #define OHCI_CC_BUFFERUNDERRUN      0xd
235 
236 #define OHCI_HRESET_FSBIR       (1 << 0)
237 
238 static void ohci_die(OHCIState *ohci)
239 {
240     ohci->ohci_die(ohci);
241 }
242 
243 /* Update IRQ levels */
244 static inline void ohci_intr_update(OHCIState *ohci)
245 {
246     int level = 0;
247 
248     if ((ohci->intr & OHCI_INTR_MIE) &&
249         (ohci->intr_status & ohci->intr))
250         level = 1;
251 
252     qemu_set_irq(ohci->irq, level);
253 }
254 
255 /* Set an interrupt */
256 static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr)
257 {
258     ohci->intr_status |= intr;
259     ohci_intr_update(ohci);
260 }
261 
262 static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr)
263 {
264     USBDevice *dev;
265     int i;
266 
267     for (i = 0; i < ohci->num_ports; i++) {
268         if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) {
269             continue;
270         }
271         dev = usb_find_device(&ohci->rhport[i].port, addr);
272         if (dev != NULL) {
273             return dev;
274         }
275     }
276     return NULL;
277 }
278 
279 void ohci_stop_endpoints(OHCIState *ohci)
280 {
281     USBDevice *dev;
282     int i, j;
283 
284     if (ohci->async_td) {
285         usb_cancel_packet(&ohci->usb_packet);
286         ohci->async_td = 0;
287     }
288     for (i = 0; i < ohci->num_ports; i++) {
289         dev = ohci->rhport[i].port.dev;
290         if (dev && dev->attached) {
291             usb_device_ep_stopped(dev, &dev->ep_ctl);
292             for (j = 0; j < USB_MAX_ENDPOINTS; j++) {
293                 usb_device_ep_stopped(dev, &dev->ep_in[j]);
294                 usb_device_ep_stopped(dev, &dev->ep_out[j]);
295             }
296         }
297     }
298 }
299 
300 static void ohci_roothub_reset(OHCIState *ohci)
301 {
302     OHCIPort *port;
303     int i;
304 
305     ohci_bus_stop(ohci);
306     ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports;
307     ohci->rhdesc_b = 0x0; /* Impl. specific */
308     ohci->rhstatus = 0;
309 
310     for (i = 0; i < ohci->num_ports; i++) {
311         port = &ohci->rhport[i];
312         port->ctrl = 0;
313         if (port->port.dev && port->port.dev->attached) {
314             usb_port_reset(&port->port);
315         }
316     }
317     ohci_stop_endpoints(ohci);
318 }
319 
320 /* Reset the controller */
321 static void ohci_soft_reset(OHCIState *ohci)
322 {
323     trace_usb_ohci_reset(ohci->name);
324 
325     ohci_bus_stop(ohci);
326     ohci->ctl = (ohci->ctl & OHCI_CTL_IR) | OHCI_USB_SUSPEND;
327     ohci->old_ctl = 0;
328     ohci->status = 0;
329     ohci->intr_status = 0;
330     ohci->intr = OHCI_INTR_MIE;
331 
332     ohci->hcca = 0;
333     ohci->ctrl_head = ohci->ctrl_cur = 0;
334     ohci->bulk_head = ohci->bulk_cur = 0;
335     ohci->per_cur = 0;
336     ohci->done = 0;
337     ohci->done_count = 7;
338 
339     /* FSMPS is marked TBD in OCHI 1.0, what gives ffs?
340      * I took the value linux sets ...
341      */
342     ohci->fsmps = 0x2778;
343     ohci->fi = 0x2edf;
344     ohci->fit = 0;
345     ohci->frt = 0;
346     ohci->frame_number = 0;
347     ohci->pstart = 0;
348     ohci->lst = OHCI_LS_THRESH;
349 }
350 
351 void ohci_hard_reset(OHCIState *ohci)
352 {
353     ohci_soft_reset(ohci);
354     ohci->ctl = 0;
355     ohci_roothub_reset(ohci);
356 }
357 
358 /* Get an array of dwords from main memory */
359 static inline int get_dwords(OHCIState *ohci,
360                              dma_addr_t addr, uint32_t *buf, int num)
361 {
362     int i;
363 
364     addr += ohci->localmem_base;
365 
366     for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
367         if (dma_memory_read(ohci->as, addr,
368                             buf, sizeof(*buf), MEMTXATTRS_UNSPECIFIED)) {
369             return -1;
370         }
371         *buf = le32_to_cpu(*buf);
372     }
373 
374     return 0;
375 }
376 
377 /* Put an array of dwords in to main memory */
378 static inline int put_dwords(OHCIState *ohci,
379                              dma_addr_t addr, uint32_t *buf, int num)
380 {
381     int i;
382 
383     addr += ohci->localmem_base;
384 
385     for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
386         uint32_t tmp = cpu_to_le32(*buf);
387         if (dma_memory_write(ohci->as, addr,
388                              &tmp, sizeof(tmp), MEMTXATTRS_UNSPECIFIED)) {
389             return -1;
390         }
391     }
392 
393     return 0;
394 }
395 
396 /* Get an array of words from main memory */
397 static inline int get_words(OHCIState *ohci,
398                             dma_addr_t addr, uint16_t *buf, int num)
399 {
400     int i;
401 
402     addr += ohci->localmem_base;
403 
404     for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
405         if (dma_memory_read(ohci->as, addr,
406                             buf, sizeof(*buf), MEMTXATTRS_UNSPECIFIED)) {
407             return -1;
408         }
409         *buf = le16_to_cpu(*buf);
410     }
411 
412     return 0;
413 }
414 
415 /* Put an array of words in to main memory */
416 static inline int put_words(OHCIState *ohci,
417                             dma_addr_t addr, uint16_t *buf, int num)
418 {
419     int i;
420 
421     addr += ohci->localmem_base;
422 
423     for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) {
424         uint16_t tmp = cpu_to_le16(*buf);
425         if (dma_memory_write(ohci->as, addr,
426                              &tmp, sizeof(tmp), MEMTXATTRS_UNSPECIFIED)) {
427             return -1;
428         }
429     }
430 
431     return 0;
432 }
433 
434 static inline int ohci_read_ed(OHCIState *ohci,
435                                dma_addr_t addr, struct ohci_ed *ed)
436 {
437     return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2);
438 }
439 
440 static inline int ohci_read_td(OHCIState *ohci,
441                                dma_addr_t addr, struct ohci_td *td)
442 {
443     return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2);
444 }
445 
446 static inline int ohci_read_iso_td(OHCIState *ohci,
447                                    dma_addr_t addr, struct ohci_iso_td *td)
448 {
449     return get_dwords(ohci, addr, (uint32_t *)td, 4) ||
450            get_words(ohci, addr + 16, td->offset, 8);
451 }
452 
453 static inline int ohci_read_hcca(OHCIState *ohci,
454                                  dma_addr_t addr, struct ohci_hcca *hcca)
455 {
456     return dma_memory_read(ohci->as, addr + ohci->localmem_base, hcca,
457                            sizeof(*hcca), MEMTXATTRS_UNSPECIFIED);
458 }
459 
460 static inline int ohci_put_ed(OHCIState *ohci,
461                               dma_addr_t addr, struct ohci_ed *ed)
462 {
463     /* ed->tail is under control of the HCD.
464      * Since just ed->head is changed by HC, just write back this
465      */
466 
467     return put_dwords(ohci, addr + ED_WBACK_OFFSET,
468                       (uint32_t *)((char *)ed + ED_WBACK_OFFSET),
469                       ED_WBACK_SIZE >> 2);
470 }
471 
472 static inline int ohci_put_td(OHCIState *ohci,
473                               dma_addr_t addr, struct ohci_td *td)
474 {
475     return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2);
476 }
477 
478 static inline int ohci_put_iso_td(OHCIState *ohci,
479                                   dma_addr_t addr, struct ohci_iso_td *td)
480 {
481     return put_dwords(ohci, addr, (uint32_t *)td, 4) ||
482            put_words(ohci, addr + 16, td->offset, 8);
483 }
484 
485 static inline int ohci_put_hcca(OHCIState *ohci,
486                                 dma_addr_t addr, struct ohci_hcca *hcca)
487 {
488     return dma_memory_write(ohci->as,
489                             addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET,
490                             (char *)hcca + HCCA_WRITEBACK_OFFSET,
491                             HCCA_WRITEBACK_SIZE, MEMTXATTRS_UNSPECIFIED);
492 }
493 
494 /* Read/Write the contents of a TD from/to main memory.  */
495 static int ohci_copy_td(OHCIState *ohci, struct ohci_td *td,
496                         uint8_t *buf, int len, DMADirection dir)
497 {
498     dma_addr_t ptr, n;
499 
500     ptr = td->cbp;
501     n = 0x1000 - (ptr & 0xfff);
502     if (n > len)
503         n = len;
504 
505     if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf,
506                       n, dir, MEMTXATTRS_UNSPECIFIED)) {
507         return -1;
508     }
509     if (n == len) {
510         return 0;
511     }
512     ptr = td->be & ~0xfffu;
513     buf += n;
514     if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf,
515                       len - n, dir, MEMTXATTRS_UNSPECIFIED)) {
516         return -1;
517     }
518     return 0;
519 }
520 
521 /* Read/Write the contents of an ISO TD from/to main memory.  */
522 static int ohci_copy_iso_td(OHCIState *ohci,
523                             uint32_t start_addr, uint32_t end_addr,
524                             uint8_t *buf, int len, DMADirection dir)
525 {
526     dma_addr_t ptr, n;
527 
528     ptr = start_addr;
529     n = 0x1000 - (ptr & 0xfff);
530     if (n > len)
531         n = len;
532 
533     if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf,
534                       n, dir, MEMTXATTRS_UNSPECIFIED)) {
535         return -1;
536     }
537     if (n == len) {
538         return 0;
539     }
540     ptr = end_addr & ~0xfffu;
541     buf += n;
542     if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf,
543                       len - n, dir, MEMTXATTRS_UNSPECIFIED)) {
544         return -1;
545     }
546     return 0;
547 }
548 
549 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b)))
550 
551 static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed)
552 {
553     int dir;
554     size_t len = 0;
555     const char *str = NULL;
556     int pid;
557     int ret;
558     int i;
559     USBDevice *dev;
560     USBEndpoint *ep;
561     USBPacket *pkt;
562     uint8_t buf[8192];
563     bool int_req;
564     struct ohci_iso_td iso_td;
565     uint32_t addr;
566     uint16_t starting_frame;
567     int16_t relative_frame_number;
568     int frame_count;
569     uint32_t start_offset, next_offset, end_offset = 0;
570     uint32_t start_addr, end_addr;
571 
572     addr = ed->head & OHCI_DPTR_MASK;
573 
574     if (addr == 0) {
575         ohci_die(ohci);
576         return 1;
577     }
578 
579     if (ohci_read_iso_td(ohci, addr, &iso_td)) {
580         trace_usb_ohci_iso_td_read_failed(addr);
581         ohci_die(ohci);
582         return 1;
583     }
584 
585     starting_frame = OHCI_BM(iso_td.flags, TD_SF);
586     frame_count = OHCI_BM(iso_td.flags, TD_FC);
587     relative_frame_number = USUB(ohci->frame_number, starting_frame);
588 
589     trace_usb_ohci_iso_td_head(
590            ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK,
591            iso_td.flags, iso_td.bp, iso_td.next, iso_td.be,
592            ohci->frame_number, starting_frame,
593            frame_count, relative_frame_number);
594     trace_usb_ohci_iso_td_head_offset(
595            iso_td.offset[0], iso_td.offset[1],
596            iso_td.offset[2], iso_td.offset[3],
597            iso_td.offset[4], iso_td.offset[5],
598            iso_td.offset[6], iso_td.offset[7]);
599 
600     if (relative_frame_number < 0) {
601         trace_usb_ohci_iso_td_relative_frame_number_neg(relative_frame_number);
602         return 1;
603     } else if (relative_frame_number > frame_count) {
604         /* ISO TD expired - retire the TD to the Done Queue and continue with
605            the next ISO TD of the same ED */
606         trace_usb_ohci_iso_td_relative_frame_number_big(relative_frame_number,
607                                                         frame_count);
608         if (OHCI_CC_DATAOVERRUN == OHCI_BM(iso_td.flags, TD_CC)) {
609             /* avoid infinite loop */
610             return 1;
611         }
612         OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
613         ed->head &= ~OHCI_DPTR_MASK;
614         ed->head |= (iso_td.next & OHCI_DPTR_MASK);
615         iso_td.next = ohci->done;
616         ohci->done = addr;
617         i = OHCI_BM(iso_td.flags, TD_DI);
618         if (i < ohci->done_count)
619             ohci->done_count = i;
620         if (ohci_put_iso_td(ohci, addr, &iso_td)) {
621             ohci_die(ohci);
622             return 1;
623         }
624         return 0;
625     }
626 
627     dir = OHCI_BM(ed->flags, ED_D);
628     switch (dir) {
629     case OHCI_TD_DIR_IN:
630         str = "in";
631         pid = USB_TOKEN_IN;
632         break;
633     case OHCI_TD_DIR_OUT:
634         str = "out";
635         pid = USB_TOKEN_OUT;
636         break;
637     case OHCI_TD_DIR_SETUP:
638         str = "setup";
639         pid = USB_TOKEN_SETUP;
640         break;
641     default:
642         trace_usb_ohci_iso_td_bad_direction(dir);
643         return 1;
644     }
645 
646     if (!iso_td.bp || !iso_td.be) {
647         trace_usb_ohci_iso_td_bad_bp_be(iso_td.bp, iso_td.be);
648         return 1;
649     }
650 
651     start_offset = iso_td.offset[relative_frame_number];
652     if (relative_frame_number < frame_count) {
653         next_offset = iso_td.offset[relative_frame_number + 1];
654     } else {
655         next_offset = iso_td.be;
656     }
657 
658     if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) ||
659         ((relative_frame_number < frame_count) &&
660          !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) {
661         trace_usb_ohci_iso_td_bad_cc_not_accessed(start_offset, next_offset);
662         return 1;
663     }
664 
665     if ((relative_frame_number < frame_count) && (start_offset > next_offset)) {
666         trace_usb_ohci_iso_td_bad_cc_overrun(start_offset, next_offset);
667         return 1;
668     }
669 
670     if ((start_offset & 0x1000) == 0) {
671         start_addr = (iso_td.bp & OHCI_PAGE_MASK) |
672             (start_offset & OHCI_OFFSET_MASK);
673     } else {
674         start_addr = (iso_td.be & OHCI_PAGE_MASK) |
675             (start_offset & OHCI_OFFSET_MASK);
676     }
677 
678     if (relative_frame_number < frame_count) {
679         end_offset = next_offset - 1;
680         if ((end_offset & 0x1000) == 0) {
681             end_addr = (iso_td.bp & OHCI_PAGE_MASK) |
682                 (end_offset & OHCI_OFFSET_MASK);
683         } else {
684             end_addr = (iso_td.be & OHCI_PAGE_MASK) |
685                 (end_offset & OHCI_OFFSET_MASK);
686         }
687     } else {
688         /* Last packet in the ISO TD */
689         end_addr = next_offset;
690     }
691 
692     if (start_addr > end_addr) {
693         trace_usb_ohci_iso_td_bad_cc_overrun(start_addr, end_addr);
694         return 1;
695     }
696 
697     if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) {
698         len = (end_addr & OHCI_OFFSET_MASK) + 0x1001
699             - (start_addr & OHCI_OFFSET_MASK);
700     } else {
701         len = end_addr - start_addr + 1;
702     }
703     if (len > sizeof(buf)) {
704         len = sizeof(buf);
705     }
706 
707     if (len && dir != OHCI_TD_DIR_IN) {
708         if (ohci_copy_iso_td(ohci, start_addr, end_addr, buf, len,
709                              DMA_DIRECTION_TO_DEVICE)) {
710             ohci_die(ohci);
711             return 1;
712         }
713     }
714 
715     dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
716     if (dev == NULL) {
717         trace_usb_ohci_td_dev_error();
718         return 1;
719     }
720     ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
721     pkt = g_new0(USBPacket, 1);
722     usb_packet_init(pkt);
723     int_req = relative_frame_number == frame_count &&
724               OHCI_BM(iso_td.flags, TD_DI) == 0;
725     usb_packet_setup(pkt, pid, ep, 0, addr, false, int_req);
726     usb_packet_addbuf(pkt, buf, len);
727     usb_handle_packet(dev, pkt);
728     if (pkt->status == USB_RET_ASYNC) {
729         usb_device_flush_ep_queue(dev, ep);
730         g_free(pkt);
731         return 1;
732     }
733     if (pkt->status == USB_RET_SUCCESS) {
734         ret = pkt->actual_length;
735     } else {
736         ret = pkt->status;
737     }
738     g_free(pkt);
739 
740     trace_usb_ohci_iso_td_so(start_offset, end_offset, start_addr, end_addr,
741                              str, len, ret);
742 
743     /* Writeback */
744     if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) {
745         /* IN transfer succeeded */
746         if (ohci_copy_iso_td(ohci, start_addr, end_addr, buf, ret,
747                              DMA_DIRECTION_FROM_DEVICE)) {
748             ohci_die(ohci);
749             return 1;
750         }
751         OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
752                     OHCI_CC_NOERROR);
753         OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret);
754     } else if (dir == OHCI_TD_DIR_OUT && ret == len) {
755         /* OUT transfer succeeded */
756         OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
757                     OHCI_CC_NOERROR);
758         OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0);
759     } else {
760         if (ret > (ssize_t) len) {
761             trace_usb_ohci_iso_td_data_overrun(ret, len);
762             OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
763                         OHCI_CC_DATAOVERRUN);
764             OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
765                         len);
766         } else if (ret >= 0) {
767             trace_usb_ohci_iso_td_data_underrun(ret);
768             OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
769                         OHCI_CC_DATAUNDERRUN);
770         } else {
771             switch (ret) {
772             case USB_RET_IOERROR:
773             case USB_RET_NODEV:
774                 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
775                             OHCI_CC_DEVICENOTRESPONDING);
776                 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
777                             0);
778                 break;
779             case USB_RET_NAK:
780             case USB_RET_STALL:
781                 trace_usb_ohci_iso_td_nak(ret);
782                 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
783                             OHCI_CC_STALL);
784                 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE,
785                             0);
786                 break;
787             default:
788                 trace_usb_ohci_iso_td_bad_response(ret);
789                 OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC,
790                             OHCI_CC_UNDEXPETEDPID);
791                 break;
792             }
793         }
794     }
795 
796     if (relative_frame_number == frame_count) {
797         /* Last data packet of ISO TD - retire the TD to the Done Queue */
798         OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR);
799         ed->head &= ~OHCI_DPTR_MASK;
800         ed->head |= (iso_td.next & OHCI_DPTR_MASK);
801         iso_td.next = ohci->done;
802         ohci->done = addr;
803         i = OHCI_BM(iso_td.flags, TD_DI);
804         if (i < ohci->done_count)
805             ohci->done_count = i;
806     }
807     if (ohci_put_iso_td(ohci, addr, &iso_td)) {
808         ohci_die(ohci);
809     }
810     return 1;
811 }
812 
813 #define HEX_CHAR_PER_LINE 16
814 
815 static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len)
816 {
817     bool print16;
818     bool printall;
819     int i;
820     char tmp[3 * HEX_CHAR_PER_LINE + 1];
821     char *p = tmp;
822 
823     print16 = !!trace_event_get_state_backends(TRACE_USB_OHCI_TD_PKT_SHORT);
824     printall = !!trace_event_get_state_backends(TRACE_USB_OHCI_TD_PKT_FULL);
825 
826     if (!printall && !print16) {
827         return;
828     }
829 
830     for (i = 0; ; i++) {
831         if (i && (!(i % HEX_CHAR_PER_LINE) || (i == len))) {
832             if (!printall) {
833                 trace_usb_ohci_td_pkt_short(msg, tmp);
834                 break;
835             }
836             trace_usb_ohci_td_pkt_full(msg, tmp);
837             p = tmp;
838             *p = 0;
839         }
840         if (i == len) {
841             break;
842         }
843 
844         p += sprintf(p, " %.2x", buf[i]);
845     }
846 }
847 
848 /* Service a transport descriptor.
849    Returns nonzero to terminate processing of this endpoint.  */
850 
851 static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
852 {
853     int dir;
854     size_t len = 0, pktlen = 0;
855     const char *str = NULL;
856     int pid;
857     int ret;
858     int i;
859     USBDevice *dev;
860     USBEndpoint *ep;
861     struct ohci_td td;
862     uint32_t addr;
863     int flag_r;
864     int completion;
865 
866     addr = ed->head & OHCI_DPTR_MASK;
867     if (addr == 0) {
868         ohci_die(ohci);
869         return 1;
870     }
871 
872     /* See if this TD has already been submitted to the device.  */
873     completion = (addr == ohci->async_td);
874     if (completion && !ohci->async_complete) {
875         trace_usb_ohci_td_skip_async();
876         return 1;
877     }
878     if (ohci_read_td(ohci, addr, &td)) {
879         trace_usb_ohci_td_read_error(addr);
880         ohci_die(ohci);
881         return 1;
882     }
883 
884     dir = OHCI_BM(ed->flags, ED_D);
885     switch (dir) {
886     case OHCI_TD_DIR_OUT:
887     case OHCI_TD_DIR_IN:
888         /* Same value.  */
889         break;
890     default:
891         dir = OHCI_BM(td.flags, TD_DP);
892         break;
893     }
894 
895     switch (dir) {
896     case OHCI_TD_DIR_IN:
897         str = "in";
898         pid = USB_TOKEN_IN;
899         break;
900     case OHCI_TD_DIR_OUT:
901         str = "out";
902         pid = USB_TOKEN_OUT;
903         break;
904     case OHCI_TD_DIR_SETUP:
905         str = "setup";
906         pid = USB_TOKEN_SETUP;
907         break;
908     default:
909         trace_usb_ohci_td_bad_direction(dir);
910         return 1;
911     }
912     if (td.cbp && td.be) {
913         if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) {
914             len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff);
915         } else {
916             if (td.cbp > td.be) {
917                 trace_usb_ohci_iso_td_bad_cc_overrun(td.cbp, td.be);
918                 ohci_die(ohci);
919                 return 1;
920             }
921             len = (td.be - td.cbp) + 1;
922         }
923         if (len > sizeof(ohci->usb_buf)) {
924             len = sizeof(ohci->usb_buf);
925         }
926 
927         pktlen = len;
928         if (len && dir != OHCI_TD_DIR_IN) {
929             /* The endpoint may not allow us to transfer it all now */
930             pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT;
931             if (pktlen > len) {
932                 pktlen = len;
933             }
934             if (!completion) {
935                 if (ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen,
936                                  DMA_DIRECTION_TO_DEVICE)) {
937                     ohci_die(ohci);
938                 }
939             }
940         }
941     }
942 
943     flag_r = (td.flags & OHCI_TD_R) != 0;
944     trace_usb_ohci_td_pkt_hdr(addr, (int64_t)pktlen, (int64_t)len, str,
945                               flag_r, td.cbp, td.be);
946     ohci_td_pkt("OUT", ohci->usb_buf, pktlen);
947 
948     if (completion) {
949         ohci->async_td = 0;
950         ohci->async_complete = false;
951     } else {
952         dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
953         if (dev == NULL) {
954             trace_usb_ohci_td_dev_error();
955             return 1;
956         }
957         ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
958         if (ohci->async_td) {
959             /* ??? The hardware should allow one active packet per
960                endpoint.  We only allow one active packet per controller.
961                This should be sufficient as long as devices respond in a
962                timely manner.
963             */
964             trace_usb_ohci_td_too_many_pending(ep->nr);
965             return 1;
966         }
967         usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r,
968                          OHCI_BM(td.flags, TD_DI) == 0);
969         usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen);
970         usb_handle_packet(dev, &ohci->usb_packet);
971         trace_usb_ohci_td_packet_status(ohci->usb_packet.status);
972 
973         if (ohci->usb_packet.status == USB_RET_ASYNC) {
974             usb_device_flush_ep_queue(dev, ep);
975             ohci->async_td = addr;
976             return 1;
977         }
978     }
979     if (ohci->usb_packet.status == USB_RET_SUCCESS) {
980         ret = ohci->usb_packet.actual_length;
981     } else {
982         ret = ohci->usb_packet.status;
983     }
984 
985     if (ret >= 0) {
986         if (dir == OHCI_TD_DIR_IN) {
987             if (ohci_copy_td(ohci, &td, ohci->usb_buf, ret,
988                              DMA_DIRECTION_FROM_DEVICE)) {
989                 ohci_die(ohci);
990             }
991             ohci_td_pkt("IN", ohci->usb_buf, pktlen);
992         } else {
993             ret = pktlen;
994         }
995     }
996 
997     /* Writeback */
998     if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) {
999         /* Transmission succeeded.  */
1000         if (ret == len) {
1001             td.cbp = 0;
1002         } else {
1003             if ((td.cbp & 0xfff) + ret > 0xfff) {
1004                 td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff);
1005             } else {
1006                 td.cbp += ret;
1007             }
1008         }
1009         td.flags |= OHCI_TD_T1;
1010         td.flags ^= OHCI_TD_T0;
1011         OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR);
1012         OHCI_SET_BM(td.flags, TD_EC, 0);
1013 
1014         if ((dir != OHCI_TD_DIR_IN) && (ret != len)) {
1015             /* Partial packet transfer: TD not ready to retire yet */
1016             goto exit_no_retire;
1017         }
1018 
1019         /* Setting ED_C is part of the TD retirement process */
1020         ed->head &= ~OHCI_ED_C;
1021         if (td.flags & OHCI_TD_T0)
1022             ed->head |= OHCI_ED_C;
1023     } else {
1024         if (ret >= 0) {
1025             trace_usb_ohci_td_underrun();
1026             OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN);
1027         } else {
1028             switch (ret) {
1029             case USB_RET_IOERROR:
1030             case USB_RET_NODEV:
1031                 trace_usb_ohci_td_dev_error();
1032                 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING);
1033                 break;
1034             case USB_RET_NAK:
1035                 trace_usb_ohci_td_nak();
1036                 return 1;
1037             case USB_RET_STALL:
1038                 trace_usb_ohci_td_stall();
1039                 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL);
1040                 break;
1041             case USB_RET_BABBLE:
1042                 trace_usb_ohci_td_babble();
1043                 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN);
1044                 break;
1045             default:
1046                 trace_usb_ohci_td_bad_device_response(ret);
1047                 OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID);
1048                 OHCI_SET_BM(td.flags, TD_EC, 3);
1049                 break;
1050             }
1051             /* An error occurred so we have to clear the interrupt counter. See
1052              * spec at 6.4.4 on page 104 */
1053             ohci->done_count = 0;
1054         }
1055         ed->head |= OHCI_ED_H;
1056     }
1057 
1058     /* Retire this TD */
1059     ed->head &= ~OHCI_DPTR_MASK;
1060     ed->head |= td.next & OHCI_DPTR_MASK;
1061     td.next = ohci->done;
1062     ohci->done = addr;
1063     i = OHCI_BM(td.flags, TD_DI);
1064     if (i < ohci->done_count)
1065         ohci->done_count = i;
1066 exit_no_retire:
1067     if (ohci_put_td(ohci, addr, &td)) {
1068         ohci_die(ohci);
1069         return 1;
1070     }
1071     return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR;
1072 }
1073 
1074 /* Service an endpoint list.  Returns nonzero if active TD were found.  */
1075 static int ohci_service_ed_list(OHCIState *ohci, uint32_t head)
1076 {
1077     struct ohci_ed ed;
1078     uint32_t next_ed;
1079     uint32_t cur;
1080     int active;
1081     uint32_t link_cnt = 0;
1082     active = 0;
1083 
1084     if (head == 0)
1085         return 0;
1086 
1087     for (cur = head; cur && link_cnt++ < ED_LINK_LIMIT; cur = next_ed) {
1088         if (ohci_read_ed(ohci, cur, &ed)) {
1089             trace_usb_ohci_ed_read_error(cur);
1090             ohci_die(ohci);
1091             return 0;
1092         }
1093 
1094         next_ed = ed.next & OHCI_DPTR_MASK;
1095 
1096         if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) {
1097             uint32_t addr;
1098             /* Cancel pending packets for ED that have been paused.  */
1099             addr = ed.head & OHCI_DPTR_MASK;
1100             if (ohci->async_td && addr == ohci->async_td) {
1101                 usb_cancel_packet(&ohci->usb_packet);
1102                 ohci->async_td = 0;
1103                 usb_device_ep_stopped(ohci->usb_packet.ep->dev,
1104                                       ohci->usb_packet.ep);
1105             }
1106             continue;
1107         }
1108 
1109         while ((ed.head & OHCI_DPTR_MASK) != ed.tail) {
1110             trace_usb_ohci_ed_pkt(cur, (ed.head & OHCI_ED_H) != 0,
1111                     (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK,
1112                     ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK);
1113             trace_usb_ohci_ed_pkt_flags(
1114                     OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN),
1115                     OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0,
1116                     (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0,
1117                     OHCI_BM(ed.flags, ED_MPS));
1118 
1119             active = 1;
1120 
1121             if ((ed.flags & OHCI_ED_F) == 0) {
1122                 if (ohci_service_td(ohci, &ed))
1123                     break;
1124             } else {
1125                 /* Handle isochronous endpoints */
1126                 if (ohci_service_iso_td(ohci, &ed)) {
1127                     break;
1128                 }
1129             }
1130         }
1131 
1132         if (ohci_put_ed(ohci, cur, &ed)) {
1133             ohci_die(ohci);
1134             return 0;
1135         }
1136     }
1137 
1138     return active;
1139 }
1140 
1141 /* set a timer for EOF */
1142 static void ohci_eof_timer(OHCIState *ohci)
1143 {
1144     timer_mod(ohci->eof_timer, ohci->sof_time + usb_frame_time);
1145 }
1146 /* Set a timer for EOF and generate a SOF event */
1147 static void ohci_sof(OHCIState *ohci)
1148 {
1149     ohci->sof_time += usb_frame_time;
1150     ohci_eof_timer(ohci);
1151     ohci_set_interrupt(ohci, OHCI_INTR_SF);
1152 }
1153 
1154 /* Process Control and Bulk lists.  */
1155 static void ohci_process_lists(OHCIState *ohci)
1156 {
1157     if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) {
1158         if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) {
1159             trace_usb_ohci_process_lists(ohci->ctrl_head, ohci->ctrl_cur);
1160         }
1161         if (!ohci_service_ed_list(ohci, ohci->ctrl_head)) {
1162             ohci->ctrl_cur = 0;
1163             ohci->status &= ~OHCI_STATUS_CLF;
1164         }
1165     }
1166 
1167     if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) {
1168         if (!ohci_service_ed_list(ohci, ohci->bulk_head)) {
1169             ohci->bulk_cur = 0;
1170             ohci->status &= ~OHCI_STATUS_BLF;
1171         }
1172     }
1173 }
1174 
1175 /* Do frame processing on frame boundary */
1176 static void ohci_frame_boundary(void *opaque)
1177 {
1178     OHCIState *ohci = opaque;
1179     struct ohci_hcca hcca;
1180 
1181     if (ohci_read_hcca(ohci, ohci->hcca, &hcca)) {
1182         trace_usb_ohci_hcca_read_error(ohci->hcca);
1183         ohci_die(ohci);
1184         return;
1185     }
1186 
1187     /* Process all the lists at the end of the frame */
1188     if (ohci->ctl & OHCI_CTL_PLE) {
1189         int n;
1190 
1191         n = ohci->frame_number & 0x1f;
1192         ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]));
1193     }
1194 
1195     /* Cancel all pending packets if either of the lists has been disabled.  */
1196     if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) {
1197         ohci_stop_endpoints(ohci);
1198     }
1199     ohci->old_ctl = ohci->ctl;
1200     ohci_process_lists(ohci);
1201 
1202     /* Stop if UnrecoverableError happened or ohci_sof will crash */
1203     if (ohci->intr_status & OHCI_INTR_UE) {
1204         return;
1205     }
1206 
1207     /* Frame boundary, so do EOF stuf here */
1208     ohci->frt = ohci->fit;
1209 
1210     /* Increment frame number and take care of endianness. */
1211     ohci->frame_number = (ohci->frame_number + 1) & 0xffff;
1212     hcca.frame = cpu_to_le16(ohci->frame_number);
1213 
1214     if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
1215         if (!ohci->done)
1216             abort();
1217         if (ohci->intr & ohci->intr_status)
1218             ohci->done |= 1;
1219         hcca.done = cpu_to_le32(ohci->done);
1220         ohci->done = 0;
1221         ohci->done_count = 7;
1222         ohci_set_interrupt(ohci, OHCI_INTR_WD);
1223     }
1224 
1225     if (ohci->done_count != 7 && ohci->done_count != 0)
1226         ohci->done_count--;
1227 
1228     /* Do SOF stuff here */
1229     ohci_sof(ohci);
1230 
1231     /* Writeback HCCA */
1232     if (ohci_put_hcca(ohci, ohci->hcca, &hcca)) {
1233         ohci_die(ohci);
1234     }
1235 }
1236 
1237 /* Start sending SOF tokens across the USB bus, lists are processed in
1238  * next frame
1239  */
1240 static int ohci_bus_start(OHCIState *ohci)
1241 {
1242     trace_usb_ohci_start(ohci->name);
1243 
1244     /* Delay the first SOF event by one frame time as
1245      * linux driver is not ready to receive it and
1246      * can meet some race conditions
1247      */
1248 
1249     ohci->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1250     ohci_eof_timer(ohci);
1251 
1252     return 1;
1253 }
1254 
1255 /* Stop sending SOF tokens on the bus */
1256 void ohci_bus_stop(OHCIState *ohci)
1257 {
1258     trace_usb_ohci_stop(ohci->name);
1259     timer_del(ohci->eof_timer);
1260 }
1261 
1262 /* Sets a flag in a port status register but only set it if the port is
1263  * connected, if not set ConnectStatusChange flag. If flag is enabled
1264  * return 1.
1265  */
1266 static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val)
1267 {
1268     int ret = 1;
1269 
1270     /* writing a 0 has no effect */
1271     if (val == 0)
1272         return 0;
1273 
1274     /* If CurrentConnectStatus is cleared we set
1275      * ConnectStatusChange
1276      */
1277     if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) {
1278         ohci->rhport[i].ctrl |= OHCI_PORT_CSC;
1279         if (ohci->rhstatus & OHCI_RHS_DRWE) {
1280             /* TODO: CSC is a wakeup event */
1281         }
1282         return 0;
1283     }
1284 
1285     if (ohci->rhport[i].ctrl & val)
1286         ret = 0;
1287 
1288     /* set the bit */
1289     ohci->rhport[i].ctrl |= val;
1290 
1291     return ret;
1292 }
1293 
1294 /* Set the frame interval - frame interval toggle is manipulated by the hcd only */
1295 static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val)
1296 {
1297     val &= OHCI_FMI_FI;
1298 
1299     if (val != ohci->fi) {
1300         trace_usb_ohci_set_frame_interval(ohci->name, ohci->fi, ohci->fi);
1301     }
1302 
1303     ohci->fi = val;
1304 }
1305 
1306 static void ohci_port_power(OHCIState *ohci, int i, int p)
1307 {
1308     if (p) {
1309         ohci->rhport[i].ctrl |= OHCI_PORT_PPS;
1310     } else {
1311         ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS|
1312                     OHCI_PORT_CCS|
1313                     OHCI_PORT_PSS|
1314                     OHCI_PORT_PRS);
1315     }
1316 }
1317 
1318 /* Set HcControlRegister */
1319 static void ohci_set_ctl(OHCIState *ohci, uint32_t val)
1320 {
1321     uint32_t old_state;
1322     uint32_t new_state;
1323 
1324     old_state = ohci->ctl & OHCI_CTL_HCFS;
1325     ohci->ctl = val;
1326     new_state = ohci->ctl & OHCI_CTL_HCFS;
1327 
1328     /* no state change */
1329     if (old_state == new_state)
1330         return;
1331 
1332     trace_usb_ohci_set_ctl(ohci->name, new_state);
1333     switch (new_state) {
1334     case OHCI_USB_OPERATIONAL:
1335         ohci_bus_start(ohci);
1336         break;
1337     case OHCI_USB_SUSPEND:
1338         ohci_bus_stop(ohci);
1339         /* clear pending SF otherwise linux driver loops in ohci_irq() */
1340         ohci->intr_status &= ~OHCI_INTR_SF;
1341         ohci_intr_update(ohci);
1342         break;
1343     case OHCI_USB_RESUME:
1344         trace_usb_ohci_resume(ohci->name);
1345         break;
1346     case OHCI_USB_RESET:
1347         ohci_roothub_reset(ohci);
1348         break;
1349     }
1350 }
1351 
1352 static uint32_t ohci_get_frame_remaining(OHCIState *ohci)
1353 {
1354     uint16_t fr;
1355     int64_t tks;
1356 
1357     if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL)
1358         return (ohci->frt << 31);
1359 
1360     /* Being in USB operational state guarnatees sof_time was
1361      * set already.
1362      */
1363     tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ohci->sof_time;
1364     if (tks < 0) {
1365         tks = 0;
1366     }
1367 
1368     /* avoid muldiv if possible */
1369     if (tks >= usb_frame_time)
1370         return (ohci->frt << 31);
1371 
1372     tks = tks / usb_bit_time;
1373     fr = (uint16_t)(ohci->fi - tks);
1374 
1375     return (ohci->frt << 31) | fr;
1376 }
1377 
1378 
1379 /* Set root hub status */
1380 static void ohci_set_hub_status(OHCIState *ohci, uint32_t val)
1381 {
1382     uint32_t old_state;
1383 
1384     old_state = ohci->rhstatus;
1385 
1386     /* write 1 to clear OCIC */
1387     if (val & OHCI_RHS_OCIC)
1388         ohci->rhstatus &= ~OHCI_RHS_OCIC;
1389 
1390     if (val & OHCI_RHS_LPS) {
1391         int i;
1392 
1393         for (i = 0; i < ohci->num_ports; i++)
1394             ohci_port_power(ohci, i, 0);
1395         trace_usb_ohci_hub_power_down();
1396     }
1397 
1398     if (val & OHCI_RHS_LPSC) {
1399         int i;
1400 
1401         for (i = 0; i < ohci->num_ports; i++)
1402             ohci_port_power(ohci, i, 1);
1403         trace_usb_ohci_hub_power_up();
1404     }
1405 
1406     if (val & OHCI_RHS_DRWE)
1407         ohci->rhstatus |= OHCI_RHS_DRWE;
1408 
1409     if (val & OHCI_RHS_CRWE)
1410         ohci->rhstatus &= ~OHCI_RHS_DRWE;
1411 
1412     if (old_state != ohci->rhstatus)
1413         ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
1414 }
1415 
1416 /* Set root hub port status */
1417 static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val)
1418 {
1419     uint32_t old_state;
1420     OHCIPort *port;
1421 
1422     port = &ohci->rhport[portnum];
1423     old_state = port->ctrl;
1424 
1425     /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */
1426     if (val & OHCI_PORT_WTC)
1427         port->ctrl &= ~(val & OHCI_PORT_WTC);
1428 
1429     if (val & OHCI_PORT_CCS)
1430         port->ctrl &= ~OHCI_PORT_PES;
1431 
1432     ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES);
1433 
1434     if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) {
1435         trace_usb_ohci_port_suspend(portnum);
1436     }
1437 
1438     if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) {
1439         trace_usb_ohci_port_reset(portnum);
1440         usb_device_reset(port->port.dev);
1441         port->ctrl &= ~OHCI_PORT_PRS;
1442         /* ??? Should this also set OHCI_PORT_PESC.  */
1443         port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC;
1444     }
1445 
1446     /* Invert order here to ensure in ambiguous case, device is
1447      * powered up...
1448      */
1449     if (val & OHCI_PORT_LSDA)
1450         ohci_port_power(ohci, portnum, 0);
1451     if (val & OHCI_PORT_PPS)
1452         ohci_port_power(ohci, portnum, 1);
1453 
1454     if (old_state != port->ctrl)
1455         ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
1456 }
1457 
1458 static uint64_t ohci_mem_read(void *opaque,
1459                               hwaddr addr,
1460                               unsigned size)
1461 {
1462     OHCIState *ohci = opaque;
1463     uint32_t retval;
1464 
1465     /* Only aligned reads are allowed on OHCI */
1466     if (addr & 3) {
1467         trace_usb_ohci_mem_read_unaligned(addr);
1468         return 0xffffffff;
1469     } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) {
1470         /* HcRhPortStatus */
1471         retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS;
1472     } else {
1473         switch (addr >> 2) {
1474         case 0: /* HcRevision */
1475             retval = 0x10;
1476             break;
1477 
1478         case 1: /* HcControl */
1479             retval = ohci->ctl;
1480             break;
1481 
1482         case 2: /* HcCommandStatus */
1483             retval = ohci->status;
1484             break;
1485 
1486         case 3: /* HcInterruptStatus */
1487             retval = ohci->intr_status;
1488             break;
1489 
1490         case 4: /* HcInterruptEnable */
1491         case 5: /* HcInterruptDisable */
1492             retval = ohci->intr;
1493             break;
1494 
1495         case 6: /* HcHCCA */
1496             retval = ohci->hcca;
1497             break;
1498 
1499         case 7: /* HcPeriodCurrentED */
1500             retval = ohci->per_cur;
1501             break;
1502 
1503         case 8: /* HcControlHeadED */
1504             retval = ohci->ctrl_head;
1505             break;
1506 
1507         case 9: /* HcControlCurrentED */
1508             retval = ohci->ctrl_cur;
1509             break;
1510 
1511         case 10: /* HcBulkHeadED */
1512             retval = ohci->bulk_head;
1513             break;
1514 
1515         case 11: /* HcBulkCurrentED */
1516             retval = ohci->bulk_cur;
1517             break;
1518 
1519         case 12: /* HcDoneHead */
1520             retval = ohci->done;
1521             break;
1522 
1523         case 13: /* HcFmInterretval */
1524             retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi);
1525             break;
1526 
1527         case 14: /* HcFmRemaining */
1528             retval = ohci_get_frame_remaining(ohci);
1529             break;
1530 
1531         case 15: /* HcFmNumber */
1532             retval = ohci->frame_number;
1533             break;
1534 
1535         case 16: /* HcPeriodicStart */
1536             retval = ohci->pstart;
1537             break;
1538 
1539         case 17: /* HcLSThreshold */
1540             retval = ohci->lst;
1541             break;
1542 
1543         case 18: /* HcRhDescriptorA */
1544             retval = ohci->rhdesc_a;
1545             break;
1546 
1547         case 19: /* HcRhDescriptorB */
1548             retval = ohci->rhdesc_b;
1549             break;
1550 
1551         case 20: /* HcRhStatus */
1552             retval = ohci->rhstatus;
1553             break;
1554 
1555         /* PXA27x specific registers */
1556         case 24: /* HcStatus */
1557             retval = ohci->hstatus & ohci->hmask;
1558             break;
1559 
1560         case 25: /* HcHReset */
1561             retval = ohci->hreset;
1562             break;
1563 
1564         case 26: /* HcHInterruptEnable */
1565             retval = ohci->hmask;
1566             break;
1567 
1568         case 27: /* HcHInterruptTest */
1569             retval = ohci->htest;
1570             break;
1571 
1572         default:
1573             trace_usb_ohci_mem_read_bad_offset(addr);
1574             retval = 0xffffffff;
1575         }
1576     }
1577 
1578     return retval;
1579 }
1580 
1581 static void ohci_mem_write(void *opaque,
1582                            hwaddr addr,
1583                            uint64_t val,
1584                            unsigned size)
1585 {
1586     OHCIState *ohci = opaque;
1587 
1588     /* Only aligned reads are allowed on OHCI */
1589     if (addr & 3) {
1590         trace_usb_ohci_mem_write_unaligned(addr);
1591         return;
1592     }
1593 
1594     if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) {
1595         /* HcRhPortStatus */
1596         ohci_port_set_status(ohci, (addr - 0x54) >> 2, val);
1597         return;
1598     }
1599 
1600     switch (addr >> 2) {
1601     case 1: /* HcControl */
1602         ohci_set_ctl(ohci, val);
1603         break;
1604 
1605     case 2: /* HcCommandStatus */
1606         /* SOC is read-only */
1607         val = (val & ~OHCI_STATUS_SOC);
1608 
1609         /* Bits written as '0' remain unchanged in the register */
1610         ohci->status |= val;
1611 
1612         if (ohci->status & OHCI_STATUS_HCR)
1613             ohci_soft_reset(ohci);
1614         break;
1615 
1616     case 3: /* HcInterruptStatus */
1617         ohci->intr_status &= ~val;
1618         ohci_intr_update(ohci);
1619         break;
1620 
1621     case 4: /* HcInterruptEnable */
1622         ohci->intr |= val;
1623         ohci_intr_update(ohci);
1624         break;
1625 
1626     case 5: /* HcInterruptDisable */
1627         ohci->intr &= ~val;
1628         ohci_intr_update(ohci);
1629         break;
1630 
1631     case 6: /* HcHCCA */
1632         ohci->hcca = val & OHCI_HCCA_MASK;
1633         break;
1634 
1635     case 7: /* HcPeriodCurrentED */
1636         /* Ignore writes to this read-only register, Linux does them */
1637         break;
1638 
1639     case 8: /* HcControlHeadED */
1640         ohci->ctrl_head = val & OHCI_EDPTR_MASK;
1641         break;
1642 
1643     case 9: /* HcControlCurrentED */
1644         ohci->ctrl_cur = val & OHCI_EDPTR_MASK;
1645         break;
1646 
1647     case 10: /* HcBulkHeadED */
1648         ohci->bulk_head = val & OHCI_EDPTR_MASK;
1649         break;
1650 
1651     case 11: /* HcBulkCurrentED */
1652         ohci->bulk_cur = val & OHCI_EDPTR_MASK;
1653         break;
1654 
1655     case 13: /* HcFmInterval */
1656         ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16;
1657         ohci->fit = (val & OHCI_FMI_FIT) >> 31;
1658         ohci_set_frame_interval(ohci, val);
1659         break;
1660 
1661     case 15: /* HcFmNumber */
1662         break;
1663 
1664     case 16: /* HcPeriodicStart */
1665         ohci->pstart = val & 0xffff;
1666         break;
1667 
1668     case 17: /* HcLSThreshold */
1669         ohci->lst = val & 0xffff;
1670         break;
1671 
1672     case 18: /* HcRhDescriptorA */
1673         ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK;
1674         ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK;
1675         break;
1676 
1677     case 19: /* HcRhDescriptorB */
1678         break;
1679 
1680     case 20: /* HcRhStatus */
1681         ohci_set_hub_status(ohci, val);
1682         break;
1683 
1684     /* PXA27x specific registers */
1685     case 24: /* HcStatus */
1686         ohci->hstatus &= ~(val & ohci->hmask);
1687         break;
1688 
1689     case 25: /* HcHReset */
1690         ohci->hreset = val & ~OHCI_HRESET_FSBIR;
1691         if (val & OHCI_HRESET_FSBIR)
1692             ohci_hard_reset(ohci);
1693         break;
1694 
1695     case 26: /* HcHInterruptEnable */
1696         ohci->hmask = val;
1697         break;
1698 
1699     case 27: /* HcHInterruptTest */
1700         ohci->htest = val;
1701         break;
1702 
1703     default:
1704         trace_usb_ohci_mem_write_bad_offset(addr);
1705         break;
1706     }
1707 }
1708 
1709 static const MemoryRegionOps ohci_mem_ops = {
1710     .read = ohci_mem_read,
1711     .write = ohci_mem_write,
1712     .endianness = DEVICE_LITTLE_ENDIAN,
1713 };
1714 
1715 /* USBPortOps */
1716 static void ohci_attach(USBPort *port1)
1717 {
1718     OHCIState *s = port1->opaque;
1719     OHCIPort *port = &s->rhport[port1->index];
1720     uint32_t old_state = port->ctrl;
1721 
1722     /* set connect status */
1723     port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
1724 
1725     /* update speed */
1726     if (port->port.dev->speed == USB_SPEED_LOW) {
1727         port->ctrl |= OHCI_PORT_LSDA;
1728     } else {
1729         port->ctrl &= ~OHCI_PORT_LSDA;
1730     }
1731 
1732     /* notify of remote-wakeup */
1733     if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
1734         ohci_set_interrupt(s, OHCI_INTR_RD);
1735     }
1736 
1737     trace_usb_ohci_port_attach(port1->index);
1738 
1739     if (old_state != port->ctrl) {
1740         ohci_set_interrupt(s, OHCI_INTR_RHSC);
1741     }
1742 }
1743 
1744 static void ohci_child_detach(USBPort *port1, USBDevice *dev)
1745 {
1746     OHCIState *ohci = port1->opaque;
1747 
1748     if (ohci->async_td &&
1749         usb_packet_is_inflight(&ohci->usb_packet) &&
1750         ohci->usb_packet.ep->dev == dev) {
1751         usb_cancel_packet(&ohci->usb_packet);
1752         ohci->async_td = 0;
1753     }
1754 }
1755 
1756 static void ohci_detach(USBPort *port1)
1757 {
1758     OHCIState *s = port1->opaque;
1759     OHCIPort *port = &s->rhport[port1->index];
1760     uint32_t old_state = port->ctrl;
1761 
1762     ohci_child_detach(port1, port1->dev);
1763 
1764     /* set connect status */
1765     if (port->ctrl & OHCI_PORT_CCS) {
1766         port->ctrl &= ~OHCI_PORT_CCS;
1767         port->ctrl |= OHCI_PORT_CSC;
1768     }
1769     /* disable port */
1770     if (port->ctrl & OHCI_PORT_PES) {
1771         port->ctrl &= ~OHCI_PORT_PES;
1772         port->ctrl |= OHCI_PORT_PESC;
1773     }
1774     trace_usb_ohci_port_detach(port1->index);
1775 
1776     if (old_state != port->ctrl) {
1777         ohci_set_interrupt(s, OHCI_INTR_RHSC);
1778     }
1779 }
1780 
1781 static void ohci_wakeup(USBPort *port1)
1782 {
1783     OHCIState *s = port1->opaque;
1784     OHCIPort *port = &s->rhport[port1->index];
1785     uint32_t intr = 0;
1786     if (port->ctrl & OHCI_PORT_PSS) {
1787         trace_usb_ohci_port_wakeup(port1->index);
1788         port->ctrl |= OHCI_PORT_PSSC;
1789         port->ctrl &= ~OHCI_PORT_PSS;
1790         intr = OHCI_INTR_RHSC;
1791     }
1792     /* Note that the controller can be suspended even if this port is not */
1793     if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
1794         trace_usb_ohci_remote_wakeup(s->name);
1795         /* This is the one state transition the controller can do by itself */
1796         s->ctl &= ~OHCI_CTL_HCFS;
1797         s->ctl |= OHCI_USB_RESUME;
1798         /*
1799          * In suspend mode only ResumeDetected is possible, not RHSC:
1800          * see the OHCI spec 5.1.2.3.
1801          */
1802         intr = OHCI_INTR_RD;
1803     }
1804     ohci_set_interrupt(s, intr);
1805 }
1806 
1807 static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
1808 {
1809     OHCIState *ohci = container_of(packet, OHCIState, usb_packet);
1810 
1811     trace_usb_ohci_async_complete();
1812     ohci->async_complete = true;
1813     ohci_process_lists(ohci);
1814 }
1815 
1816 static USBPortOps ohci_port_ops = {
1817     .attach = ohci_attach,
1818     .detach = ohci_detach,
1819     .child_detach = ohci_child_detach,
1820     .wakeup = ohci_wakeup,
1821     .complete = ohci_async_complete_packet,
1822 };
1823 
1824 static USBBusOps ohci_bus_ops = {
1825 };
1826 
1827 void usb_ohci_init(OHCIState *ohci, DeviceState *dev, uint32_t num_ports,
1828                    dma_addr_t localmem_base, char *masterbus,
1829                    uint32_t firstport, AddressSpace *as,
1830                    void (*ohci_die_fn)(struct OHCIState *), Error **errp)
1831 {
1832     Error *err = NULL;
1833     int i;
1834 
1835     ohci->as = as;
1836     ohci->ohci_die = ohci_die_fn;
1837 
1838     if (num_ports > OHCI_MAX_PORTS) {
1839         error_setg(errp, "OHCI num-ports=%u is too big (limit is %u ports)",
1840                    num_ports, OHCI_MAX_PORTS);
1841         return;
1842     }
1843 
1844     if (usb_frame_time == 0) {
1845 #ifdef OHCI_TIME_WARP
1846         usb_frame_time = NANOSECONDS_PER_SECOND;
1847         usb_bit_time = NANOSECONDS_PER_SECOND / (USB_HZ / 1000);
1848 #else
1849         usb_frame_time = NANOSECONDS_PER_SECOND / 1000;
1850         if (NANOSECONDS_PER_SECOND >= USB_HZ) {
1851             usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ;
1852         } else {
1853             usb_bit_time = 1;
1854         }
1855 #endif
1856         trace_usb_ohci_init_time(usb_frame_time, usb_bit_time);
1857     }
1858 
1859     ohci->num_ports = num_ports;
1860     if (masterbus) {
1861         USBPort *ports[OHCI_MAX_PORTS];
1862         for(i = 0; i < num_ports; i++) {
1863             ports[i] = &ohci->rhport[i].port;
1864         }
1865         usb_register_companion(masterbus, ports, num_ports,
1866                                firstport, ohci, &ohci_port_ops,
1867                                USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL,
1868                                &err);
1869         if (err) {
1870             error_propagate(errp, err);
1871             return;
1872         }
1873     } else {
1874         usb_bus_new(&ohci->bus, sizeof(ohci->bus), &ohci_bus_ops, dev);
1875         for (i = 0; i < num_ports; i++) {
1876             usb_register_port(&ohci->bus, &ohci->rhport[i].port,
1877                               ohci, i, &ohci_port_ops,
1878                               USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
1879         }
1880     }
1881 
1882     memory_region_init_io(&ohci->mem, OBJECT(dev), &ohci_mem_ops,
1883                           ohci, "ohci", 256);
1884     ohci->localmem_base = localmem_base;
1885 
1886     ohci->name = object_get_typename(OBJECT(dev));
1887     usb_packet_init(&ohci->usb_packet);
1888 
1889     ohci->async_td = 0;
1890 
1891     ohci->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
1892                                    ohci_frame_boundary, ohci);
1893 }
1894 
1895 /**
1896  * A typical OHCI will stop operating and set itself into error state
1897  * (which can be queried by MMIO) to signal that it got an error.
1898  */
1899 void ohci_sysbus_die(struct OHCIState *ohci)
1900 {
1901     trace_usb_ohci_die();
1902 
1903     ohci_set_interrupt(ohci, OHCI_INTR_UE);
1904     ohci_bus_stop(ohci);
1905 }
1906 
1907 static void ohci_realize_pxa(DeviceState *dev, Error **errp)
1908 {
1909     OHCISysBusState *s = SYSBUS_OHCI(dev);
1910     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1911     Error *err = NULL;
1912 
1913     usb_ohci_init(&s->ohci, dev, s->num_ports, s->dma_offset,
1914                   s->masterbus, s->firstport,
1915                   &address_space_memory, ohci_sysbus_die, &err);
1916     if (err) {
1917         error_propagate(errp, err);
1918         return;
1919     }
1920     sysbus_init_irq(sbd, &s->ohci.irq);
1921     sysbus_init_mmio(sbd, &s->ohci.mem);
1922 }
1923 
1924 static void usb_ohci_reset_sysbus(DeviceState *dev)
1925 {
1926     OHCISysBusState *s = SYSBUS_OHCI(dev);
1927     OHCIState *ohci = &s->ohci;
1928 
1929     ohci_hard_reset(ohci);
1930 }
1931 
1932 static const VMStateDescription vmstate_ohci_state_port = {
1933     .name = "ohci-core/port",
1934     .version_id = 1,
1935     .minimum_version_id = 1,
1936     .fields = (VMStateField[]) {
1937         VMSTATE_UINT32(ctrl, OHCIPort),
1938         VMSTATE_END_OF_LIST()
1939     },
1940 };
1941 
1942 static bool ohci_eof_timer_needed(void *opaque)
1943 {
1944     OHCIState *ohci = opaque;
1945 
1946     return timer_pending(ohci->eof_timer);
1947 }
1948 
1949 static const VMStateDescription vmstate_ohci_eof_timer = {
1950     .name = "ohci-core/eof-timer",
1951     .version_id = 1,
1952     .minimum_version_id = 1,
1953     .needed = ohci_eof_timer_needed,
1954     .fields = (VMStateField[]) {
1955         VMSTATE_TIMER_PTR(eof_timer, OHCIState),
1956         VMSTATE_END_OF_LIST()
1957     },
1958 };
1959 
1960 const VMStateDescription vmstate_ohci_state = {
1961     .name = "ohci-core",
1962     .version_id = 1,
1963     .minimum_version_id = 1,
1964     .fields = (VMStateField[]) {
1965         VMSTATE_INT64(sof_time, OHCIState),
1966         VMSTATE_UINT32(ctl, OHCIState),
1967         VMSTATE_UINT32(status, OHCIState),
1968         VMSTATE_UINT32(intr_status, OHCIState),
1969         VMSTATE_UINT32(intr, OHCIState),
1970         VMSTATE_UINT32(hcca, OHCIState),
1971         VMSTATE_UINT32(ctrl_head, OHCIState),
1972         VMSTATE_UINT32(ctrl_cur, OHCIState),
1973         VMSTATE_UINT32(bulk_head, OHCIState),
1974         VMSTATE_UINT32(bulk_cur, OHCIState),
1975         VMSTATE_UINT32(per_cur, OHCIState),
1976         VMSTATE_UINT32(done, OHCIState),
1977         VMSTATE_INT32(done_count, OHCIState),
1978         VMSTATE_UINT16(fsmps, OHCIState),
1979         VMSTATE_UINT8(fit, OHCIState),
1980         VMSTATE_UINT16(fi, OHCIState),
1981         VMSTATE_UINT8(frt, OHCIState),
1982         VMSTATE_UINT16(frame_number, OHCIState),
1983         VMSTATE_UINT16(padding, OHCIState),
1984         VMSTATE_UINT32(pstart, OHCIState),
1985         VMSTATE_UINT32(lst, OHCIState),
1986         VMSTATE_UINT32(rhdesc_a, OHCIState),
1987         VMSTATE_UINT32(rhdesc_b, OHCIState),
1988         VMSTATE_UINT32(rhstatus, OHCIState),
1989         VMSTATE_STRUCT_ARRAY(rhport, OHCIState, OHCI_MAX_PORTS, 0,
1990                              vmstate_ohci_state_port, OHCIPort),
1991         VMSTATE_UINT32(hstatus, OHCIState),
1992         VMSTATE_UINT32(hmask, OHCIState),
1993         VMSTATE_UINT32(hreset, OHCIState),
1994         VMSTATE_UINT32(htest, OHCIState),
1995         VMSTATE_UINT32(old_ctl, OHCIState),
1996         VMSTATE_UINT8_ARRAY(usb_buf, OHCIState, 8192),
1997         VMSTATE_UINT32(async_td, OHCIState),
1998         VMSTATE_BOOL(async_complete, OHCIState),
1999         VMSTATE_END_OF_LIST()
2000     },
2001     .subsections = (const VMStateDescription*[]) {
2002         &vmstate_ohci_eof_timer,
2003         NULL
2004     }
2005 };
2006 
2007 static Property ohci_sysbus_properties[] = {
2008     DEFINE_PROP_STRING("masterbus", OHCISysBusState, masterbus),
2009     DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3),
2010     DEFINE_PROP_UINT32("firstport", OHCISysBusState, firstport, 0),
2011     DEFINE_PROP_DMAADDR("dma-offset", OHCISysBusState, dma_offset, 0),
2012     DEFINE_PROP_END_OF_LIST(),
2013 };
2014 
2015 static void ohci_sysbus_class_init(ObjectClass *klass, void *data)
2016 {
2017     DeviceClass *dc = DEVICE_CLASS(klass);
2018 
2019     dc->realize = ohci_realize_pxa;
2020     set_bit(DEVICE_CATEGORY_USB, dc->categories);
2021     dc->desc = "OHCI USB Controller";
2022     device_class_set_props(dc, ohci_sysbus_properties);
2023     dc->reset = usb_ohci_reset_sysbus;
2024 }
2025 
2026 static const TypeInfo ohci_sysbus_info = {
2027     .name          = TYPE_SYSBUS_OHCI,
2028     .parent        = TYPE_SYS_BUS_DEVICE,
2029     .instance_size = sizeof(OHCISysBusState),
2030     .class_init    = ohci_sysbus_class_init,
2031 };
2032 
2033 static void ohci_register_types(void)
2034 {
2035     type_register_static(&ohci_sysbus_info);
2036 }
2037 
2038 type_init(ohci_register_types)
2039