1 /* 2 * ARM SSE (Subsystems for Embedded): IoTKit, SSE-200 3 * 4 * Copyright (c) 2018 Linaro Limited 5 * Written by Peter Maydell 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 or 9 * (at your option) any later version. 10 */ 11 12 /* 13 * This is a model of the Arm "Subsystems for Embedded" family of 14 * hardware, which include the IoT Kit and the SSE-050, SSE-100 and 15 * SSE-200. Currently we model: 16 * - the Arm IoT Kit which is documented in 17 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html 18 * - the SSE-200 which is documented in 19 * http://infocenter.arm.com/help/topic/com.arm.doc.101104_0100_00_en/corelink_sse200_subsystem_for_embedded_technical_reference_manual_101104_0100_00_en.pdf 20 * 21 * The IoTKit contains: 22 * a Cortex-M33 23 * the IDAU 24 * some timers and watchdogs 25 * two peripheral protection controllers 26 * a memory protection controller 27 * a security controller 28 * a bus fabric which arranges that some parts of the address 29 * space are secure and non-secure aliases of each other 30 * The SSE-200 additionally contains: 31 * a second Cortex-M33 32 * two Message Handling Units (MHUs) 33 * an optional CryptoCell (which we do not model) 34 * more SRAM banks with associated MPCs 35 * multiple Power Policy Units (PPUs) 36 * a control interface for an icache for each CPU 37 * per-CPU identity and control register blocks 38 * 39 * QEMU interface: 40 * + QOM property "memory" is a MemoryRegion containing the devices provided 41 * by the board model. 42 * + QOM property "MAINCLK" is the frequency of the main system clock 43 * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. 44 * (In hardware, the SSE-200 permits the number of expansion interrupts 45 * for the two CPUs to be configured separately, but we restrict it to 46 * being the same for both, to avoid having to have separate Property 47 * lists for different variants. This restriction can be relaxed later 48 * if necessary.) 49 * + QOM property "SRAM_ADDR_WIDTH" sets the number of bits used for the 50 * address of each SRAM bank (and thus the total amount of internal SRAM) 51 * + QOM property "init-svtor" sets the initial value of the CPU SVTOR register 52 * (where it expects to load the PC and SP from the vector table on reset) 53 * + QOM properties "CPU0_FPU", "CPU0_DSP", "CPU1_FPU" and "CPU1_DSP" which 54 * set whether the CPUs have the FPU and DSP features present. The default 55 * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an 56 * SSE-200 both are present; CPU0 in an SSE-200 has neither. 57 * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. 58 * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, 59 * which are wired to its NVIC lines 32 .. n+32 60 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for 61 * CPU 1, which are wired to its NVIC lines 32 .. n+32 62 * + sysbus MMIO region 0 is the "AHB Slave Expansion" which allows 63 * bus master devices in the board model to make transactions into 64 * all the devices and memory areas in the IoTKit 65 * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit 66 * might provide: 67 * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] 68 * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15] 69 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable 70 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear 71 * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status 72 * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit 73 * might provide: 74 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15] 75 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15] 76 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable 77 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear 78 * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status 79 * Controlling each of the 16 expansion MPCs which a system using the IoTKit 80 * might provide: 81 * + named GPIO inputs mpcexp_status[0..15] 82 * Controlling each of the 16 expansion MSCs which a system using the IoTKit 83 * might provide: 84 * + named GPIO inputs mscexp_status[0..15] 85 * + named GPIO outputs mscexp_clear[0..15] 86 * + named GPIO outputs mscexp_ns[0..15] 87 */ 88 89 #ifndef ARMSSE_H 90 #define ARMSSE_H 91 92 #include "hw/sysbus.h" 93 #include "hw/arm/armv7m.h" 94 #include "hw/misc/iotkit-secctl.h" 95 #include "hw/misc/tz-ppc.h" 96 #include "hw/misc/tz-mpc.h" 97 #include "hw/timer/cmsdk-apb-timer.h" 98 #include "hw/timer/cmsdk-apb-dualtimer.h" 99 #include "hw/watchdog/cmsdk-apb-watchdog.h" 100 #include "hw/misc/iotkit-sysctl.h" 101 #include "hw/misc/iotkit-sysinfo.h" 102 #include "hw/misc/armsse-cpuid.h" 103 #include "hw/misc/armsse-mhu.h" 104 #include "hw/misc/unimp.h" 105 #include "hw/or-irq.h" 106 #include "hw/core/split-irq.h" 107 #include "hw/cpu/cluster.h" 108 #include "qom/object.h" 109 110 #define TYPE_ARM_SSE "arm-sse" 111 typedef struct ARMSSE ARMSSE; 112 typedef struct ARMSSEClass ARMSSEClass; 113 DECLARE_OBJ_CHECKERS(ARMSSE, ARMSSEClass, 114 ARM_SSE, TYPE_ARM_SSE) 115 116 /* 117 * These type names are for specific IoTKit subsystems; other than 118 * instantiating them, code using these devices should always handle 119 * them via the ARMSSE base class, so they have no IOTKIT() etc macros. 120 */ 121 #define TYPE_IOTKIT "iotkit" 122 #define TYPE_SSE200 "sse-200" 123 124 /* We have an IRQ splitter and an OR gate input for each external PPC 125 * and the 2 internal PPCs 126 */ 127 #define NUM_EXTERNAL_PPCS (IOTS_NUM_AHB_EXP_PPC + IOTS_NUM_APB_EXP_PPC) 128 #define NUM_PPCS (NUM_EXTERNAL_PPCS + 2) 129 130 #define MAX_SRAM_BANKS 4 131 #if MAX_SRAM_BANKS > IOTS_NUM_MPC 132 #error Too many SRAM banks 133 #endif 134 135 #define SSE_MAX_CPUS 2 136 137 /* These define what each PPU in the ppu[] index is for */ 138 #define CPU0CORE_PPU 0 139 #define CPU1CORE_PPU 1 140 #define DBG_PPU 2 141 #define RAM0_PPU 3 142 #define RAM1_PPU 4 143 #define RAM2_PPU 5 144 #define RAM3_PPU 6 145 #define NUM_PPUS 7 146 147 struct ARMSSE { 148 /*< private >*/ 149 SysBusDevice parent_obj; 150 151 /*< public >*/ 152 ARMv7MState armv7m[SSE_MAX_CPUS]; 153 CPUClusterState cluster[SSE_MAX_CPUS]; 154 IoTKitSecCtl secctl; 155 TZPPC apb_ppc0; 156 TZPPC apb_ppc1; 157 TZMPC mpc[IOTS_NUM_MPC]; 158 CMSDKAPBTIMER timer0; 159 CMSDKAPBTIMER timer1; 160 CMSDKAPBTIMER s32ktimer; 161 qemu_or_irq ppc_irq_orgate; 162 SplitIRQ sec_resp_splitter; 163 SplitIRQ ppc_irq_splitter[NUM_PPCS]; 164 SplitIRQ mpc_irq_splitter[IOTS_NUM_EXP_MPC + IOTS_NUM_MPC]; 165 qemu_or_irq mpc_irq_orgate; 166 qemu_or_irq nmi_orgate; 167 168 SplitIRQ cpu_irq_splitter[32]; 169 170 CMSDKAPBDualTimer dualtimer; 171 172 CMSDKAPBWatchdog s32kwatchdog; 173 CMSDKAPBWatchdog nswatchdog; 174 CMSDKAPBWatchdog swatchdog; 175 176 IoTKitSysCtl sysctl; 177 IoTKitSysCtl sysinfo; 178 179 ARMSSEMHU mhu[2]; 180 UnimplementedDeviceState ppu[NUM_PPUS]; 181 UnimplementedDeviceState cachectrl[SSE_MAX_CPUS]; 182 UnimplementedDeviceState cpusecctrl[SSE_MAX_CPUS]; 183 184 ARMSSECPUID cpuid[SSE_MAX_CPUS]; 185 186 /* 187 * 'container' holds all devices seen by all CPUs. 188 * 'cpu_container[i]' is the view that CPU i has: this has the 189 * per-CPU devices of that CPU, plus as the background 'container' 190 * (or an alias of it, since we can only use it directly once). 191 * container_alias[i] is the alias of 'container' used by CPU i+1; 192 * CPU 0 can use 'container' directly. 193 */ 194 MemoryRegion container; 195 MemoryRegion container_alias[SSE_MAX_CPUS - 1]; 196 MemoryRegion cpu_container[SSE_MAX_CPUS]; 197 MemoryRegion alias1; 198 MemoryRegion alias2; 199 MemoryRegion alias3[SSE_MAX_CPUS]; 200 MemoryRegion sram[MAX_SRAM_BANKS]; 201 202 qemu_irq *exp_irqs[SSE_MAX_CPUS]; 203 qemu_irq ppc0_irq; 204 qemu_irq ppc1_irq; 205 qemu_irq sec_resp_cfg; 206 qemu_irq sec_resp_cfg_in; 207 qemu_irq nsc_cfg_in; 208 209 qemu_irq irq_status_in[NUM_EXTERNAL_PPCS]; 210 qemu_irq mpcexp_status_in[IOTS_NUM_EXP_MPC]; 211 212 uint32_t nsccfg; 213 214 /* Properties */ 215 MemoryRegion *board_memory; 216 uint32_t exp_numirq; 217 uint32_t mainclk_frq; 218 uint32_t sram_addr_width; 219 uint32_t init_svtor; 220 bool cpu_fpu[SSE_MAX_CPUS]; 221 bool cpu_dsp[SSE_MAX_CPUS]; 222 }; 223 224 typedef struct ARMSSEInfo ARMSSEInfo; 225 226 struct ARMSSEClass { 227 SysBusDeviceClass parent_class; 228 const ARMSSEInfo *info; 229 }; 230 231 232 #endif 233