xref: /qemu/include/hw/xen/interface/io/usbif.h (revision ab9056ff)
1 /*
2  * usbif.h
3  *
4  * USB I/O interface for Xen guest OSes.
5  *
6  * Copyright (C) 2009, FUJITSU LABORATORIES LTD.
7  * Author: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
8  *
9  * Permission is hereby granted, free of charge, to any person obtaining a copy
10  * of this software and associated documentation files (the "Software"), to
11  * deal in the Software without restriction, including without limitation the
12  * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
13  * sell copies of the Software, and to permit persons to whom the Software is
14  * furnished to do so, subject to the following conditions:
15  *
16  * The above copyright notice and this permission notice shall be included in
17  * all copies or substantial portions of the Software.
18  *
19  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
22  * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
23  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
24  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
25  * DEALINGS IN THE SOFTWARE.
26  */
27 
28 #ifndef __XEN_PUBLIC_IO_USBIF_H__
29 #define __XEN_PUBLIC_IO_USBIF_H__
30 
31 #include "ring.h"
32 #include "../grant_table.h"
33 
34 /*
35  * Feature and Parameter Negotiation
36  * =================================
37  * The two halves of a Xen pvUSB driver utilize nodes within the XenStore to
38  * communicate capabilities and to negotiate operating parameters. This
39  * section enumerates these nodes which reside in the respective front and
40  * backend portions of the XenStore, following the XenBus convention.
41  *
42  * Any specified default value is in effect if the corresponding XenBus node
43  * is not present in the XenStore.
44  *
45  * XenStore nodes in sections marked "PRIVATE" are solely for use by the
46  * driver side whose XenBus tree contains them.
47  *
48  *****************************************************************************
49  *                            Backend XenBus Nodes
50  *****************************************************************************
51  *
52  *------------------ Backend Device Identification (PRIVATE) ------------------
53  *
54  * num-ports
55  *      Values:         unsigned [1...31]
56  *
57  *      Number of ports for this (virtual) USB host connector.
58  *
59  * usb-ver
60  *      Values:         unsigned [1...2]
61  *
62  *      USB version of this host connector: 1 = USB 1.1, 2 = USB 2.0.
63  *
64  * port/[1...31]
65  *      Values:         string
66  *
67  *      Physical USB device connected to the given port, e.g. "3-1.5".
68  *
69  *****************************************************************************
70  *                            Frontend XenBus Nodes
71  *****************************************************************************
72  *
73  *----------------------- Request Transport Parameters -----------------------
74  *
75  * event-channel
76  *      Values:         unsigned
77  *
78  *      The identifier of the Xen event channel used to signal activity
79  *      in the ring buffer.
80  *
81  * urb-ring-ref
82  *      Values:         unsigned
83  *
84  *      The Xen grant reference granting permission for the backend to map
85  *      the sole page in a single page sized ring buffer. This is the ring
86  *      buffer for urb requests.
87  *
88  * conn-ring-ref
89  *      Values:         unsigned
90  *
91  *      The Xen grant reference granting permission for the backend to map
92  *      the sole page in a single page sized ring buffer. This is the ring
93  *      buffer for connection/disconnection requests.
94  *
95  * protocol
96  *      Values:         string (XEN_IO_PROTO_ABI_*)
97  *      Default Value:  XEN_IO_PROTO_ABI_NATIVE
98  *
99  *      The machine ABI rules governing the format of all ring request and
100  *      response structures.
101  *
102  */
103 
104 enum usb_spec_version {
105 	USB_VER_UNKNOWN = 0,
106 	USB_VER_USB11,
107 	USB_VER_USB20,
108 	USB_VER_USB30,	/* not supported yet */
109 };
110 
111 /*
112  *  USB pipe in usbif_request
113  *
114  *  - port number:	bits 0-4
115  *				(USB_MAXCHILDREN is 31)
116  *
117  *  - operation flag:	bit 5
118  *				(0 = submit urb,
119  *				 1 = unlink urb)
120  *
121  *  - direction:		bit 7
122  *				(0 = Host-to-Device [Out]
123  *				 1 = Device-to-Host [In])
124  *
125  *  - device address:	bits 8-14
126  *
127  *  - endpoint:		bits 15-18
128  *
129  *  - pipe type:	bits 30-31
130  *				(00 = isochronous, 01 = interrupt,
131  *				 10 = control, 11 = bulk)
132  */
133 
134 #define USBIF_PIPE_PORT_MASK	0x0000001f
135 #define USBIF_PIPE_UNLINK	0x00000020
136 #define USBIF_PIPE_DIR		0x00000080
137 #define USBIF_PIPE_DEV_MASK	0x0000007f
138 #define USBIF_PIPE_DEV_SHIFT	8
139 #define USBIF_PIPE_EP_MASK	0x0000000f
140 #define USBIF_PIPE_EP_SHIFT	15
141 #define USBIF_PIPE_TYPE_MASK	0x00000003
142 #define USBIF_PIPE_TYPE_SHIFT	30
143 #define USBIF_PIPE_TYPE_ISOC	0
144 #define USBIF_PIPE_TYPE_INT	1
145 #define USBIF_PIPE_TYPE_CTRL	2
146 #define USBIF_PIPE_TYPE_BULK	3
147 
148 #define usbif_pipeportnum(pipe)			((pipe) & USBIF_PIPE_PORT_MASK)
149 #define usbif_setportnum_pipe(pipe, portnum)	((pipe) | (portnum))
150 
151 #define usbif_pipeunlink(pipe)			((pipe) & USBIF_PIPE_UNLINK)
152 #define usbif_pipesubmit(pipe)			(!usbif_pipeunlink(pipe))
153 #define usbif_setunlink_pipe(pipe)		((pipe) | USBIF_PIPE_UNLINK)
154 
155 #define usbif_pipein(pipe)			((pipe) & USBIF_PIPE_DIR)
156 #define usbif_pipeout(pipe)			(!usbif_pipein(pipe))
157 
158 #define usbif_pipedevice(pipe)			\
159 		(((pipe) >> USBIF_PIPE_DEV_SHIFT) & USBIF_PIPE_DEV_MASK)
160 
161 #define usbif_pipeendpoint(pipe)		\
162 		(((pipe) >> USBIF_PIPE_EP_SHIFT) & USBIF_PIPE_EP_MASK)
163 
164 #define usbif_pipetype(pipe)			\
165 		(((pipe) >> USBIF_PIPE_TYPE_SHIFT) & USBIF_PIPE_TYPE_MASK)
166 #define usbif_pipeisoc(pipe)	(usbif_pipetype(pipe) == USBIF_PIPE_TYPE_ISOC)
167 #define usbif_pipeint(pipe)	(usbif_pipetype(pipe) == USBIF_PIPE_TYPE_INT)
168 #define usbif_pipectrl(pipe)	(usbif_pipetype(pipe) == USBIF_PIPE_TYPE_CTRL)
169 #define usbif_pipebulk(pipe)	(usbif_pipetype(pipe) == USBIF_PIPE_TYPE_BULK)
170 
171 #define USBIF_MAX_SEGMENTS_PER_REQUEST (16)
172 #define USBIF_MAX_PORTNR	31
173 #define USBIF_RING_SIZE	4096
174 
175 /*
176  * RING for transferring urbs.
177  */
178 struct usbif_request_segment {
179 	grant_ref_t gref;
180 	uint16_t offset;
181 	uint16_t length;
182 };
183 
184 struct usbif_urb_request {
185 	uint16_t id; /* request id */
186 	uint16_t nr_buffer_segs; /* number of urb->transfer_buffer segments */
187 
188 	/* basic urb parameter */
189 	uint32_t pipe;
190 	uint16_t transfer_flags;
191 #define USBIF_SHORT_NOT_OK	0x0001
192 	uint16_t buffer_length;
193 	union {
194 		uint8_t ctrl[8]; /* setup_packet (Ctrl) */
195 
196 		struct {
197 			uint16_t interval; /* maximum (1024*8) in usb core */
198 			uint16_t start_frame; /* start frame */
199 			uint16_t number_of_packets; /* number of ISO packet */
200 			uint16_t nr_frame_desc_segs; /* number of iso_frame_desc segments */
201 		} isoc;
202 
203 		struct {
204 			uint16_t interval; /* maximum (1024*8) in usb core */
205 			uint16_t pad[3];
206 		} intr;
207 
208 		struct {
209 			uint16_t unlink_id; /* unlink request id */
210 			uint16_t pad[3];
211 		} unlink;
212 
213 	} u;
214 
215 	/* urb data segments */
216 	struct usbif_request_segment seg[USBIF_MAX_SEGMENTS_PER_REQUEST];
217 };
218 typedef struct usbif_urb_request usbif_urb_request_t;
219 
220 struct usbif_urb_response {
221 	uint16_t id; /* request id */
222 	uint16_t start_frame;  /* start frame (ISO) */
223 	int32_t status; /* status (non-ISO) */
224 	int32_t actual_length; /* actual transfer length */
225 	int32_t error_count; /* number of ISO errors */
226 };
227 typedef struct usbif_urb_response usbif_urb_response_t;
228 
229 DEFINE_RING_TYPES(usbif_urb, struct usbif_urb_request, struct usbif_urb_response);
230 #define USB_URB_RING_SIZE __CONST_RING_SIZE(usbif_urb, USBIF_RING_SIZE)
231 
232 /*
233  * RING for notifying connect/disconnect events to frontend
234  */
235 struct usbif_conn_request {
236 	uint16_t id;
237 };
238 typedef struct usbif_conn_request usbif_conn_request_t;
239 
240 struct usbif_conn_response {
241 	uint16_t id; /* request id */
242 	uint8_t portnum; /* port number */
243 	uint8_t speed; /* usb_device_speed */
244 #define USBIF_SPEED_NONE	0
245 #define USBIF_SPEED_LOW		1
246 #define USBIF_SPEED_FULL	2
247 #define USBIF_SPEED_HIGH	3
248 };
249 typedef struct usbif_conn_response usbif_conn_response_t;
250 
251 DEFINE_RING_TYPES(usbif_conn, struct usbif_conn_request, struct usbif_conn_response);
252 #define USB_CONN_RING_SIZE __CONST_RING_SIZE(usbif_conn, USBIF_RING_SIZE)
253 
254 #endif /* __XEN_PUBLIC_IO_USBIF_H__ */
255